Product Specifications HBX HBX--6517DS--VTM VTM Andrew® Teletilt ® Antenna, 1710–2180 MHz, 65° horizontal beamwidth, RET compatible Teletilt® l
l
Superior azimuth tracking and pattern symmetry to minimize any sector sector overlap Rugged, reliable design with excellent passive intermodulation suppression
Electrical Specifications Frequency Band, MHz Gain, dBi Bea mwidth , Horizon tal , degre es Beamwidth, Ve rtical, degree s Beam Tilt, degrees USLS, typical, dB Front- to - Back Ratio at 180°, dB I so l a t i o n , d B VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Inpu t Power per Port, ma ximu m, wa tts Polarization Impe dan ce
1710–1880 19. 0 65 5.0 0–6 18 30 30
1850–1990 19. 1 65 4 .7 0–6 18 30 30
1920–2180 19. 2 65 4 .4 0–6 18 30 30
1 . 4 | 15 .6
1 . 4 | 15 .6
1 . 4 | 15 .6
- 153 350 ± 45° 50 ohm
- 153 350 ± 45° 5 0 oh m
- 153 350 ± 45° 5 0 oh m
General Specificati Specifications ons Antenna Brand
Andrew®
Antenna Type
DualPol®
Band
Single band
Brand
DualPol® | Teletilt®
Operating Frequency Band
1710 – 2180 MHz
Mechanical Specifications Color
Light gray
Connector Interface
7- 16 DIN Female
Connector Location
Bottom
Connector Quantity, total
2
Lightning Protection
dc Ground
Radiator Material
Low loss circuit board
Radome Material
PVC, UV resistant
Wind Area, maximum
0.2 m² |
Wind Loading, maximum
393.2 N @ 150 km/h 88.4 lbf @ 150 km/h
Wind Speed, maximum
241.0 km/h |
1.8 ft²
149.8 149. 8 mph
Dimensions Depth Dept h
©2013
83.0 83 .0 mm | 3. 3.3 3 in
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current inf information. ormation. Revised: September 20, 2013
Page 1 of 5 N ovembe ovemberr 18, 18, 2 2013 013
Product Specifications HBX -6517DS-VTM Length
1902.0 mm |
74.9 in
Width
166.0 mm | 6.5 in
Net Weight
6.2 kg | 13.7 lb
Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 1.1 Actuator HBX- 6517DS - R2M Model with Factory Installed AISG 2.0 Actuator HBX- 6517DS - A1M RET System
Teletilt®
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364 - 2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
Included Products DB390 — Pipe Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Use for narrow panel antennas. Includes two pipe mounts. DB5098E — Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members
©2013
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current inf information. ormation. Revised: September 20, 2013
Page 2 of 5 N ovember 18, 18, 2 2013 013
Product Specifications HBX -6517DS-VTM
Horizontal Pattern
©2013
Vertical Pattern
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current inf information. ormation. Revised: September 20, 2013
Page 3 of 5 N ovember 18, 18, 2 2013 013
Product Specifications DB390 Pipe Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Use for narrow panel antennas. Includes two pipe mounts.
General Specifications Antenna Brand
Andrew®
Mount Type
Pipe mounts
Application
Outdoor
Includes
Brackets |
Package Quantity
2
Hardware
Mechanical Specifications Color
Silver
Material Type
Galvanized steel
Dimensions Compatible Diameter, maximum 114.3 mm | 4.5 in Compatible Diameter, minimum 61.0 mm | 2.4 in Net Weight
2.0 kg | 4.4 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364 - 2006 ISO 9001:2008
©2013
Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013
Page 4 of 5 N ovember 18, 18, 2 2013 013
Product Specifications DB5098E Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members
General Specifications Antenna Brand
Andrew®
Mount Type
Downtilt mounts
Application
Outdoor
Includes
Brackets |
Package Quantity
1
Hardware
Mechanical Specifications Color
Silver
Material Type
Galvanized steel
Dimensions Compatible Diameter, maximum 114.3 mm | 4.5 in Compatible Diameter, minimum 61.0 mm | 2.4 in Net Weight
1.2 kg | 2.6 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364 - 2006 ISO 9001:2008
©2013
Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013
Page 5 of 5 N ovember 18, 18, 2 2013 013
