Generic Connection Details Cold-formed Steel Structures

CAUTION: The author, by making the information in this document publicly available cannot be considered as rendering professional service. Users of this document are therefore advised to seek the services of a qualified practitioner of structural engineering, to thoroughly review the proposed project and the suitability of applying the information in this document for such purpose. This advice shall be obtained, prior to application for building approval. The person or party rendering such advice shall accept full responsibility for such applications of said information.

GUIDELINES COLD-FORMEDSTEEL PORTAL FRAME SH SHEDS GENERIC IC DETAILS PN/100:0 :001

DISCLAIMER: Since the information contained in this document may be applied under conditions beyond the author’s control, users are advised that they have been cautioned and that the entire risk as to the suitability of the document for a particular purpose is with the user. No responsibility can be accepted by the author or copyright holders for any loss or damage caused by any person acting or refraining from action as a result of this information. Furthermore the author and copyright holders make no representation or warranty regarding accuracy of any information contained in this document. In no event unless required by applicable law or agreed to in writing, will the author or copyright holders be liable to the user or affected third parties for damages, including any general, special, incidental or consequential damages arising directly, indirectly, or remotely from the use or omission of any information contained in this document.

Februar bruary y 2015 Terminology •System: a collection of components which can be combined to create an assembly suitable for a specific application.

•Application: an assembly produced from the structural system for a specific purpose. •Installation: a given application installed installed on a specific site to meet an end-users specific needs. •Structural Product: A system, a component of a system or an application.

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:04:53

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33

STRUCTURAL DESIGN

Draft Print 25/02/2015 21:05:33