General Instrument Sourcebook Instruments for Surgeons
®
®
KMedic
KMedic’s Mission
The KMedic Guarantee
Founded in 1986, KMedic is today the leading provider of orthopedic surgical instruments in the United States. KMedic has achieved this position by focusing focusing its energies and wherewithal on orthopedic surgic surgical al instruments. This consistent focus and commitment enables KMedic to provide the orthopedic community with an ever-increasing selection of fine instruments that conform to the highest standards of precision and reliability, consistency of pattern and lasting value.
KMedic aspires to be — and to be recognized by the medical profession as — the best orthopedic surgical instrument company. We will achieve this position by passionately pursuing excellence and by dedicating ourselves to improving the quality of life of everyone who interacts with us, particularly those individuals who rely on our products to heal and to cure.
KMedic instruments are guaranteed for life against manufacturing defects of material and workmanship. This guarantee is void if instruments are not maintained or repaired properly, or if they are not used for their intended surgical purpose. Tungsten carbide inserts on scissors, needle holders and wire cutters are guaranteed for three years. Replacement parts, such as springs, are guaranteed for one year.
i
KMedic Certified Instruments
KMedic is a company with a passion for excellence. As such, we are committed to “raising the bar” in every aspect of our business, from customer service to product development. With regard regard to instruments, this commitment takes the form of superior products that perform impeccably. In order to provide surgeons with the tools they need to operate with the utmost skill and confidence, we have introduced an instrument certifying process that is second to none in the industry. See inside back cover. Every step in the creation and distribution distribution of KMedicbranded ins instru trument mentss — from material material testing testing and crafting, crafting, to delivery and customer service service — follo follows ws our exacting exacting standards. To achieve this level of excellence, we have a Quality Assurance Program that begins at the President’s office and continues through every KMedic department, down to our loading dock. This program demands:
That quality is built into every product through excellent design and good manufacturing practices Scrupulous adherence to our award-winning Quality Assurance Policy The presence of German-trained quality assurance personnel — including instrument makers, engineers and inspectors — to supervise prevention and verification activities After more than a decade, the proven success of our Quality Assurance Program enables us to “guarantee for life” KMedic Certified Instruments.
ii
About Illustrations
Table of Contents
Please keep in mind that the illustrations in this guide indicate general design only. As instrument making is characterized by continual refinement — subject to innovation and improvement — we reserve the right to ship the most modern pattern of a given instrument.
Ordering Information
In addition, measuremen measurements ts given for overall length may vary slightly because of metric conversion. Detailed drawings marked 1/1 are approximately the actual size. Those marked 1/2 are approximately one half the actual size.
Instrument Care
iv v-vi
Diagnostic Instruments and Scalpel Handles
1
Super-Cut Scissors
3
Tungsten Carbide Scissors
6
Operating Scissors
7
Suture and Wire Scissors
10
Band Ba ndaage and and Uti tili lity ty Sc Scis isso sors rs
12
Probes and Suction Tubes
13
Suture Instruments
14
Hemostatic Forceps
15
Intestinal Forceps
18
Tubing and Utility Forceps
19
Towel an and Sp Sponge Fo Forceps
20
Dres Dr essi sing ng an and d Ti Tiss ssue ue Fo Forc rcep epss
21
Splinter Forceps
25
Needle Holders
26
Skin Hooks
29
Finger Retractors
30
Retractors
32
Self-Retaining Retractors
38
Dilators
41
Elevators
42
Curettes
43
Osteotomes
44
Bone Rasps and Files
45
Bone Saws
46
Dermal Instruments
47
Eye Instruments
50
Ear and Nose Instruments
53
Mallets
57
Bone Cutting Instruments
58
Orthopedic Instruments
59
K-Wire and Steinmann Pi Pins
60
Wire and Pin Cutters
61
Plaster Cast Instruments
62
OB/GYN In Instruments
63
Rectal Instruments
70
Urological In Instruments
71
Miscellaneous
72
Sterilizing Containers
72
SmartRacks®
73
Index
77
iii
Ordering Information
KMedic Certified instruments and products may be ordered through an authorized representative. For the KMedic Representative serving your area, please call (800) 955-0559. KMedic is now available in 70 countries around the globe. For the representative serving your country, country, please call (201) 767-4002 or contact us on-line: www.kmedic.com.
When ordering, and to avoid substitutions, please specify the KMedic product number, as well as the product description. Customer Service and Relations
If you have a question or problem regarding KMedic products or services, please don’t hesitate to either notify your representative or to call KMedic at (800) 955-0559. Should you need to return an instrument, feel free to contact either your KMedic Representative or KMedic. To receive more information on new products, or to send us an e-mail, visit our web site @ www.kmedic.com. In addition to the KMedic General Instrument Sourcebook™, we also publish publish the KMedic KMedic Orthopedi Orthopedicc ™ Sourcebook , the KMedic Spinal Sourcebook™ and the KMedic Foot and Ankle Sourcebook™. To obtai obtain n copie copiess of these publications, please contact KMedic directly. Instrument Maintenance and Repair Program
The KMedic/Pilling Instrument Maintenance and Repair Program is designed to keep your instruments in optimum working condition. By providing routine maintenance, this program helps extend the life of your instruments and thereby saves on replacement and related costs. Under this program, we will refurbish or repair KMedic and other high-quality instruments. Our services also include: precise sharpening, adjustments, refinishing and lubrication. We will complete most repairs within 3 to 5 working days. If immediate attention is required, please call us in advance, and ask for our Rush Service. As part of this program, any KMedic instrument defect covered by our guarantee will be replaced or repaired free of charge. All our repair work is tested and guaranteed to perform its intended tasks. If you are not completely satisfied, we will rework the item at no charge. For more information about our Repair Program or to receive a price list, call (800) 955-0559.
iv
Instrument Longevity Through Proper Care
New Instruments
Your purchase of KMedic instruments represents a considerable investment. By following these guidelines you will protect your investment and ensure many years of productive and satisfactory performance.
Newly purchased instruments must be cleaned, lubricated and autoclaved immediately before use.
Maintaining the Surface
KMedic Certified stainless steel surgical instruments are made of corrosion resistant, high-grade specialty steels that are especially selected to meet the varying requirements of cutting, clamping, retracting and chiseling.
If no ultrasonic cleaner is available, clean the instrument very carefully. Pay particular attention when cleaning boxlocks, serrations, hinges and other hard-to-reach areas. What’ What’ss more, use nylon (not steel) brushes,, such as KM 39-684 brushes 39-684,, and warm (not hot) cleaning solutions solutions.. Foll Follow ow the manufacturer’s instructions for the prep preparati aration on of the cleaning solutions. Remember to change these solutions daily.
Correct Use
Obvious as it sounds, it bears repeating: Instruments are designed for a particular purpose and should be used only for that purpose. Even the strongest instrument can be damaged when used inappropriately inappropriately,, i.e., when when a rongeur rongeur is used to cut wire.
Ultrasonic Cleaning Water and Stainless Steel
A special characteristic of these steels is that they form passive layers on the instrument’ss surface, which instrument’ protect against corrosion. These layers act as an invisible patina and with repeated use and and exposure exposure to air, the instruments become increasingly corrosion resistant.
Ordinary tap water contains minerals that can cause discoloration and staining. Therefore, we recommend the use of distilled water for cleaning, disinfecti disinfecting, ng, sterilizing and rinsing instruments. To avoid staining, use a cleaning solution with a pH near neutral (7).
While every effort is made during the manufacturing process to ensure that instruments are corrosion resistant, the real key to longevity is proper maintenance. Toward that end, you must do your part by caring for your instruments. In a sense, the name “stainless “stain less steel” steel” is a misno misno-mer, one which should not be taken literally. When not properly treated, steel can rust or stain, reducing the life of the instrument or rendering it useless. The following sections outline proper instrument care.
Manual Cleaning and Soaking
When handling instruments, be very careful not to damage their fine tips and mechanisms. If instruments have been exposed to blood, tissue, saline or other foreign matter, you must rinse them in warm (not hot) water before these substances are allowed to dry. After rinsing, immerse them in in a cleaning cleaning and disinfecting solution. Because many compounds, including certain chemicals, are highly corrosive to stainless steel, rinse and dry instruments immediately, in case they have come in contact with any potentially harmful substances.
Ultrasonic is the most effective and efficient way to clean your instruments. To maximize its effectiveness, your instruments should be cleaned of all visible debris before they are put into an ultrasonic cleaner. Please note that chrome-plated instruments may rust if they are not dried and lubricated immediately after sterilization. In addition, we recommend the following:
Do not mix dissimilar metals, i.e., chrome and stainless, in the same cycle. Open all instruments so ratchets and boxlocks are accessible. Avoid piling instruments on top of each other when loading. Remove and rinse off instruments immediately after the cycle is finished. Dry instruments immediately after rinsing and allow them to air-dry thoroughly. thoroughly. Lubricate all moving parts.
v
Instrument Checkup
Lubrication and Autoclaving
Storage
The best time to review the condition of your instruments is after they have been cleaned and lubricated and have cooled off. Consider the following:
All instruments must be properly cleaned before autoclaving. Then their moving parts, such as boxlocks and hinges, should be well lubricated. Be careful to use surgical lubricants and not industrial oils. Always sterilize instruments in the open, unlocked position. We recommend that instruments be wrapped in cloth and then placed in the container, or that a cloth be put on the bottom of the pan to absorb moisture. The cloth should be pH(7) neutral and have no residue of detergents. Finally, avoid sudden cooling of your instruments.
Once your instruments are thoroughly dry, store them in a clean, dry environment. Never put them in areas where chemicals may emit corrosive vapors or where temperature and moisture variations could cause condensation on the instruments.
Function: Scissors must cut cleanly and close properly. Needle holders and clamps must engage properly and meet correctly at the tips. Surface: Carefully inspect surfaces for any sign of staining, cracking or other irregularities. Common sources of staining are:
Inadequate cleaning
Mixing dissimilar metals
Unsuitable or improper preparation and usage of cleaning and disinfecting or maintenance agents
Prolonged immersion in disinfecting disinfectin g or o r sterilizing solution can damage your surgical instruments. We recommend that you do not soak your instruments for longer than 20 minutes. To render the instruments sterile and ready for use, use an autoclave cycle.
Non-compliance with operating procedures of cleaning and sterilizing equipment Aluminum Trays
vi
1.
Rinse and soak soiled instruments immediately after use. Thoroughly clean before autoclaving.
2.
Autoclave and sterilize instruments in an open position.
3.
Do not stack or entangle instruments.
4.
Follow recommendations made by equipment and solutions manufacturers.
5.
Keep instruments properly lubricated.
6.
Inspect instruments regularly.
7.
If you experience a problem, at any stage of the instrument caring process, please consult with your KMedic Representative.
Cold Sterilizing or Disinfecting
Impurities in the water
To avoid development of “Aluminum Salt” on your Al-trays, use only distilled water in your autoclave. Already developed “Aluminum Salt” is very difficult to remove which might cause damage of the anodized Al-surface. Any instrument or tray should be cleaned of debris with a non-acid detergent (neutral pH) prior to autoclaving.
KMedic Instrument Care Checklist
Caution: Instruments with tungsten carbide inserts, such as wire cutters, needle holders and TC scissors, should never be immersed in sterilizing solutions containing Benzyl Ammonium Chloride (BAC). BAC will soften and dissolve the tungsten carbide.
Never use bleach as it will cause severe pitting.
KMedic: In the Tradition of the Masters
Instrument making is a highly developed craft, and the craftspeople who make KMedic surgical instruments are the modern heirs to this ancient art. It is also a vocation that has respected its traditions over the centuries. So, while new techniques have kept pace with advances in surgical practices, practices, the essence of the craft has changed very little. Today, computers and other advanced technology aid in the manufactur manufacture e of instruments, but it remains the skills of gifted instrument makers that turn raw steel into the finely honed tools...ready for the surgeon’s hand. An Extension of the Hand
At KMedic we see instruments as an extension of a surgeon’s hand. It is with this relationship in mind that we select the instruments offered in this Sourcebook. We demand from our instrument makers: precision and reliability, consistency of pattern and uniform surface, all at a good value. To ensure this level of quality, every one of our suppliers must meet our Quality Assurance Program. Only when they have met these strict standards do we qualify an instrument as KMedic Certified. The idea that the instrument is an extension of the hand is more than a romantic notion at KMedic. It is directly related to superior performance. When you work with a KMedic instrument, you’ll find it satisfies on many levels. First, like any well-crafted tool, it feels very good in your hand. What’s more, it functions extremely well. Taken together these two feelings translate into greater confidence and ease. Evolving Tradition
As we’re all aware, new surgical techniques create a continual need for improvements, as well as for the introduction of entirely new instruments. KMedic responds to these needs by forming partnerships with leading surgeons. In the belief that closer communication will lead to further advancements, we invite you to call, or to e-mail us, and share your ideas for new and/or improved instrumentation. We look forward to hearing from you.
Thomas S. Bielan President KMedic
vii
General Instrument Sourcebook
Instruments for Surgeons
®
DIAGNOSTIC INSTRUMENTS AND SCALPEL HANDLES
1
WARTENBERG NEUROLOGICAL PIN WHEEL KM 28-514 7 (178mm)
TAYLOR PERCUSSION HAMMER KM 28-460 KM 28-468 7 (178mm) 8 (203mm) small large
BUCK NEUROLOGICAL HAMMER KM 28-492 73 ⁄ 4 (195mm) chrome with brush and needle
SCALPEL HANDLE #3 KM 29-058 for blades 10 through 15
SCALPEL HANDLE #3 KM 29-059 mm and cm graduations for blades 10 through 15
SCALPEL HANDLE #3L KM 29-061 extra long 1 2 (216mm) 8 ⁄ for blades 10 through 15
®
SCALPEL HANDLES
2
MINI SCALPEL HANDLE #3K KM 29-070 for blades 61 through 67
SCALPEL HANDLE #7 KM 29-062 for blades 10 through 15
SCALPEL HANDLE #4 KM 29-060 for blades 20 through 25
SCALPEL HANDLE #9 KM 29-064 for blades 10 through 15 extra fine
®
SUPER-CUT SCISSORS
3
KMedic Super-Cut Scissors Super-Cut Scissors represent a truly remarkable advance in scissors technology. Using the finest surgical steels, the latest heat treating methods and master craftsmanship, the upper blade of the scissors is ground to a razor-sharp edge. This process creates scissors with an unprecedented smooth and effective cutting action.
Some of the benefits of KMedic Super-Cut Scissors:
Cut through soft and fibrous tissue without effort.
Superb control permits precision in dissection.
Less hand fatigue for the surgeon and less trauma for the patient.
Retain sharpness longer than ordinary scissors.
Ring handles are black-coated for easy identification.
Fully autoclavable.
Backed by KMedic’s lifetime guarantee.
Not recommended for fiberglass or plaster splints.
Surgeons who use our Super-Cut Scissors are convinced of their superior performance and won’t do without them on their surgical trays.
1 / 1
1 / 1
1 / 1
KM 35-450
KM 35-452
KM 35-454
1 / 1
1 / 1
KM 35-460
Delicate short narrow tips for dissecting fine tissue.
Fine sharp/sharp blades for cutting delicate tissue during plastic, hand, and minor vascular surgery. SUPER-CUT IRIS SCISSORS sharp points
straight 1 2 (89mm) delicate KM 35 35-4 -450 50 3 / 1 2 (114mm) KM 35 35-4 -454 54 4 / ″ ″
curved 1 2 (89mm KM 35 35-4 -452 52 3 / (89mm)) deli delicate cate 1 2 (114mm) KM 35 35-4 -460 60 4 /
1 / 1
SUPER-CUT STEVENS SCISSORS blunt points straight curved KM 35 35-4 -484 84 41 /2 KM 35 35-4 -490 90 41 /2 (114mm) KM 35 35-4 -494 94 51 /4 (133mm) ″
″ ″
″ ″
®
SUPER-CUT SCISSORS
4
Flat, blunt scissors for dissecting soft tissue.
1 / 1
1 / 1
Very delicate blunt scissors with long handles for fine tissue dissection.
1 / 1
KM 35-364
KM 35-370
SUPER-CUT BABY METZENBAUM SCISSORS blunt points KM 35-364 KM 35-370 1 2 (114mm) 4 / 41 /2 (114mm) straight curved ″
1 / 1
SUPER-CUT JAMISON SCISSORS KM 35-496 61 /4 (159mm) curved blunt points, very delicate ″
″
1 / 1 1 / 1
1 / 1
KM 35-382
1 / 1
KM 35-394
1 / 1
KM 35 35-220
KM 35-250
KM 35-396
SUPER-CUT METZENBAUM SCISSORS blunt points
straight KM 35 35-3 -380 80 6 (152mm) KM 35 35-3 -392 92 7 (178mm) ″ ″
®
curved KM 35-382 KM 35-394 KM 35-396 KM 35-406 KM 35-418 KM 3535-43 430 0
6 7 7 8 9 11
″ ″ ″ ″ ″ ″
(152mm) (178mm) (178mm) delicate (203mm) (229mm) (279mm)
SUPER-CUT OPERATING SCISSORS KM 35-220 KM 35-250 51 /2 (140mm) 51 /2 (140mm) straight curved sharp/blunt sharp/blunt ″
″
SUPER-CUT SCISSORS
5
1 / 1
The delicate offset shanks provide increased leverage. The fine knob slides easily under finger and toe bandages. Excellent for small bandages!
1 / 1
KM 35-280
SUPER-CUT MAYO SCISSORS beveled blades, blunt points straight curved 1 2 (140mm) KM 35 35-2 -280 80 5 / KM 35-286 3 4 (171mm) KM 35 35-2 -292 92 6 / KM 35-298 KM 35 35-3 -316 16 9 (229mm) KM 35-322 KM 35 35-3 -340 40 ″ ″
″
1 2 5 / 3 4 6 / 9 11
″ ″
″
″
(140mm) (171mm) (229mm) (279mm)
SUPER-CUT HI-LEVEL BANDAGE SCISSORS KM 35-202 51 /2 (140mm) shanks angled on side ″
1 / 1 1 / 1
KM 35-210
All the benefits of our Super-Cut Lister scissors plus an oversized finger ring, which helps relieve pressure on the third metacarpal.
Cuts bandages and multiple layers of dressings with ease. Razor sharp blades reduce hand fatigue.
SUPER-CUT LISTER BANDAGE SCISSORS KM 35-210 KM 35-212 1 4 (184mm) 51 /2 (140mm) 7 / ″
″
SUPER-CUT LISTER BANDAGE SCISSORS WITH LARGE FINGER RING KM 35-214 8 (203mm) ″
®
TUNGSTEN CARBIDE SCISSORS
6 Tungsten carbide (TC) is one of the hardest alloys made today. Our TC scissors have tungsten carbide firmly bonded to both cutting edges. We guarantee that they will stay sharp for at least three years. The finger rings are gold plated for easy identification.
1 / 1 1 / 1
KM 35-670
TC IRIS SCISSORS KM 35-670 1 2 (114mm) 4 ⁄ straight sharp points
1 / 1
1 / 1
KM 35-674
KM 35-672
KM 35-672 1 2 (114mm) 4 ⁄ curved sharp points
BLEPHAROPLASTY SCISSORS KM 35-510 1 2 (114mm) curved flat tips, one 4 ⁄ serrated and one carbide blade
1 / 1
KM 35-676
TC STRABISMUS SCISSORS KM 35-674 KM 35-676 1 1 2 (114mm) 2 (114mm) 4 ⁄ 4 ⁄ straight curved blunt points blunt points
1 / 1
KM 35-646
1 / 1
KM 35-620 1 / 1
1 / 1
KM 35-622
1 / 1
KM 35-600
KM 35-610
TC OPERATING SCISSORS KM 35-600 KM 35-610 1 1 2 (140mm) 2 (140mm) 5 ⁄ 5 ⁄ straight curved sharp/blunt sharp/blunt
®
TC METZENBAUM SCISSORS blunt points straight curved KM 35 35-6 -640 40 6 KM 35 35-6 -642 42 6 (152mm) KM 35 35-6 -644 44 7 KM 35 35-6 -646 46 7 (178mm) KM 35 35-6 -652 52 9 KM 35 35-6 -654 54 9 (229mm)
TC MAYO straight KM 35 35-6 -620 20 KM 35 35-6 -624 24 KM 35 35-6 -628 28
SCISSORS beveled blades curved 1 1 2 KM 35 2 (140mm) 5 ⁄ 35-6 -622 22 5 ⁄ 3 3 4 KM 35 4 (171mm) 6 / 35-6 -626 26 6 / 3 4 (229mm) 9 KM 35 35-6 -630 30 9 /
OPERATING SCISSORS
7 Most scissors can be serrated upon request.
1 / 1
1 / 1
KM 33-470 OPERATING SCISSORS straight OPERATING 1 2 (114mm) sharp/blunt KM 33 33-3 -300 00 4 ⁄ 1 2 (114mm) sharp/sharp KM 33 33-3 -302 02 4 ⁄ 1 2 (114mm) blunt/blunt KM 33 33-3 -304 04 4 ⁄ KM 33 33-3 -310 10 5 (127mm) sharp/blunt KM 33 33-3 -312 12 5 (127mm) sharp/sharp KM 33 33-3 -314 14 5 (127mm) blunt/blunt 1 2 (140mm) sharp/blunt KM 33 33-3 -320 20 5 ⁄ 1 2 (140mm) sharp/sharp KM 33 33-3 -322 22 5 ⁄ 1 2 (140mm) blunt/blunt KM 33 33-3 -324 24 5 ⁄ 1 2 (165mm) sharp/blunt KM 33 33-3 -370 70 6 ⁄ 1 2 (165mm) sharp/sharp KM 33 33-3 -372 72 6 ⁄ 1 2 (165mm) blunt/blunt KM 33 33-3 -374 74 6 ⁄
1 / 1
KM 33-472
KM 33-474
OPERATING SCISSORS curved OPERATING 1 2 (114mm) sharp/blunt KM 33 33-4 -470 70 4 ⁄ 1 2 (114mm) sharp/sharp KM 33 33-4 -472 72 4 ⁄ 1 2 (114mm) blunt/blunt KM 33 33-4 -474 74 4 ⁄ KM 33 33-4 -482 82 5 (127mm) sharp/blunt KM 33 33-4 -484 84 5 (127mm) sharp/sharp KM 33 33-4 -486 86 5 (127mm) blunt/blunt 1 2 (140mm) sharp/blunt KM 33 33-4 -490 90 5 ⁄ 1 2 (140mm) sharp/sharp KM 33 33-4 -492 92 5 ⁄ 1 2 (140mm) blunt/blunt KM 33 33-4 -494 94 5 ⁄ 1 2 (165mm) sharp/blunt KM 33 33-5 -520 20 6 ⁄ 1 2 (165mm) sharp/sharp KM 33 33-5 -522 22 6 ⁄ 1 2 (165mm) blunt/blunt KM 33 33-5 -524 24 6 ⁄
1 / 1
KM 34-142
DEAVER SCISSORS straight KM 3434-140 140 sha sharp/ rp/blu blunt nt KM 34-14 34-142 2 sharp/ sharp/sha sharp rp
1 2 (140mm) 5 ⁄ curved KM 3434-150 150 sha sharp/ rp/blu blunt nt KM 34-15 34-152 2 sharp/ sharp/sha sharp rp
1 / 2
KM 34-312 1 / 1
KM 34-462 1 / 1
KM 34-258
METZENBAUM SCISSORS blunt points straight curved 1 1 2 KM 34 2 (114mm) KM 34 34-4 -436 36 4 ⁄ 34-4 -438 38 4 ⁄ 3 4 (146m KM 34 34-4 -492 92 5 / (146mm) m) del del.. KM 34 34-4 -458 58 6 KM 34 34-4 -462 62 6 (152mm) KM 34 34-4 -466 66 7 KM 34 34-4 -470 70 7 (178mm) KM 34 34-4 -494 94 7 (178m (178mm) m) del del.. KM 34 34-4 -472 72 8 KM 34 34-4 -474 74 8 (203mm) KM 34 34-4 -476 76 9 KM 34 34-4 -478 78 9 (229mm) KM 34 34-4 -486 86 11 KM 34 34-4 -488 88 11 (279mm)
MAYO SCISSORS beveled blades straight curved 1 1 2 2 (140mm) KM 34 34-2 -256 56 5 ⁄ KM 34 34-2 -258 58 5 ⁄ 3 3 4 4 (171mm) KM 34 34-2 -260 60 6 / KM 34 34-2 -262 62 6 / KM 34 34-2 -292 92 9 KM 34 34-2 -294 94 9 (229mm) serrated serrated 3 3 4 4 (171mm) KM 34 34-2 -280 80 6 / KM 34 34-2 -282 82 6 /
MAYO-STILLE MAYO-STILLE straight 1 2 KM 34-306 5 ⁄ 3 4 KM 34-310 6 /
SCISSORS rounded blades curved 1 2 (140mm) KM 34-308 5 ⁄ 3 4 (171mm) KM 34-312 6 /
®
OPERATING SCISSORS
8
1 / 2
KM 67 67-168
KM 67 67-174
1 / 2
KM 34-327 1 / 2
KM 34-336
MAYO-NOBLE SCISSORS beveled blades KM 34-325 KM 34-327 1 2 (165mm) 6 ⁄ 61 ⁄ 2 (165mm) straight curved
DOYEN ABDOMINAL SCISSORS KM 34-334 KM 34-336 7 (178mm) 7 (178mm) straight curved
1 / 1
SIMS SCISSORS 8 (203mm) straight curved KM 67-164 67-164 sharp/sharp sharp/sharp KM 67-170 67-170 sharp/shar sharp/sharp p KM 67-166 67-166 sharp/blu sharp/blunt nt KM 67-172 67-172 sharp/bl sharp/blunt unt KM 67-168 67-168 blunt blunt/blun /bluntt KM 67-174 67-174 blunt blunt/blun /bluntt
1 / 1
KM 34-560 KM 34-562 1 / 1
KM 3434-602 602 KM 3434-60 607 7
1 / 1
SISTRUNK SCISSORS heavy pattern KM 34-356 KM 34-358 1 2 (140mm) 5 ⁄ 51 ⁄ 2 (140mm) straight curved
®
RAGNELL SCISSORS KM 34-560 KM 34-562 5 (127mm) 7 (178mm) curved curved flat blunt tips flat blunt tips
1 4 (159mm) KELLY FISTULA SCISSORS 6 ⁄ smooth sharp/sharp KM 34-602 straight KM 34-607 curved KM 34-612 angular
OPERATING SCISSORS
9
1 / 1
KM 53-072 53-072 KM 53-138 53-138
IRIS SCISSORS sharp points straight curved 1 2 (89mm) KM 53 53-0 -064 64 31 ⁄ 2 KM 53 53-0 -066 66 3 ⁄ 1 2 (114mm) KM 53 53-0 -068 68 41 ⁄ 2 KM 53 53-0 -072 72 4 ⁄ 1 8 (105mm) KM 53 53-0 -080 80 41 ⁄ 8 KM 53 53-0 -084 84 4 ⁄ KM 53-080 delicate KM 53-080 delicate angled on side 1 2 (114mm) KM 53 53-1 -138 38 4 ⁄
1 / 1
KM 5353-16 168 8
STEVENS straight KM 53 53-1 -168 68 KM 53 53-1 -174 74 curved KM 53 53-1 -172 72 KM 53 53-1 -176 76
1 / 1
1 / 1
KM 33 33-5 -532 32 KM 33 33-5 -538 38
KM 53 53-1 -160 60 KM 53 53-1 -164 64
3 4 (121mm) PLASTIC SURGERY SCISSORS 4 /
straight KM 33-53 33-532 2 sharp/s sharp/shar harp p KM 33-53 33-534 4 sharp/b sharp/blun luntt KM 33-5 33-536 36 blunt blunt/bl /blunt unt
curved KM 33-53 33-538 8 sharp/s sharp/shar harp p KM 33-54 33-540 0 sharp/ sharp/blu blunt nt KM 33-5 33-542 42 blunt blunt/bl /blunt unt angled on side KM 33-544 sharp/sharp
STRABISMUS SCISSORS KM 53-160 KM 53-164 4 (102mm) 4 (102mm) straight curved blunt points blunt points
1 / 1
KM 53 53-1 -174 74
TENOTOMY SCISSORS 1 4 (108mm) blunt/blunt 4 ⁄ 1 4 (108mm) sharp/sharp 4 ⁄
GRADLE SCISSORS KM 53-316 3 4 (95mm) slightly curved 3 / sharp/sharp
GRADLE SCISSORS KM 53-318 4 (102mm) slightly curved ribbon type, sharp/sharp
1 4 (108mm) blunt/blunt 4 ⁄ 1 4 (108mm) sharp/sharp 4 ⁄
®
SUTURE SCISSORS
10
SHORTBENT STITCH SCISSORS KM 35-080 1 2 (89mm) 3 / curved on side delicate
SPENCER STITCH SCISSORS KM 35-068 KM 35-092 1 3 2 (89mm) 4 (121mm) 3 / 4 / delicate delicate straight straight
HILL STITCH SCISSORS KM 35-084 1 4 (108mm) 4 /
NORTHBENT STITCH SCISSORS KM 35-104 3 4 (121mm) 4 ⁄ curved on side
″
®
SUTURE AND WIRE CUTTING SCISSORS
11
1 / 1
KM 35-194
LITTAUER STITCH SCISSORS KM 35-120 1 2 (140mm) 5 ⁄
WIRE CUTTING SCISSORS 4 (102mm) straight curved KM 35-168 smooth KM 35-192 smooth KM 35-170 one serrated blade KM 35-194 one se serrrated blade
Notch for cutting cerclage wire up to 1mm
1 / 1
KM 35-198
3 4 (121mm) WIRE CUTTING SCISSORS 4 ⁄ KM 35-198 KM 35-200 one serrated one serrated blade, angular blade, angular carbide
®
BANDAGE AND UTILITY SCISSORS
12
1 / 1
The delicate offset shanks provide better leverage. The fine knob slides easily under finger and toe bandages.
HI-LEVEL BANDAGE SCISSORS KM 31-792 1 2 (140mm) shanks angled on side 5 ⁄ one serrated blade
1 / 1 1 / 1
For finger and toe bandages.
KNOWLES BANDAGE SCISSORS KM 31-804 1 2 (140mm) straight 5 ⁄ one serrated blade
KM 31-692
LISTER BANDAGE SCISSORS 1 2 KM 31 31-6 -668 68 3 ⁄ (89mm) 1 2 (114mm) KM 31 31-6 -680 80 4 ⁄ 1 2 (140mm) KM 31 31-6 -692 92 5 ⁄ 1 4 (184mm) KM 31 31-7 -704 04 7 ⁄ KM 31 31-7 -708 08 8 (203mm) one large finger ring
1 / 1
UTILITY SCISSORS one serrated blade KM 31-830 KM 31-832 1 2 (191mm) 6 (152mm) Lister-type 7 ⁄ (not pictured)
With autoclavable plastic finger rings.
®
HERCULES SCISSORS KM 31-834 1 2 (191mm) heavy duty 7 ⁄ one serrated blade
KMEDIC UTILIT UTILITY Y SHEARS KM 31-836 8 (203mm) with wire cutting notch one serrated blade
PROBES AND SUCTION TUBES
13
1 french = .33mm PROBE WITH EYE malleable stainless 1 2 (114mm) KM 42 42-6 -608 08 4 ⁄ KM 42 42-6 -610 10 5 (127mm) 1 2 (140mm) KM 42 42-6 -612 12 5 ⁄ KM 42 42-6 -614 14 6 (152mm) KM 42 42-6 -616 16 8 (203mm) KM 42 42-6 -618 18 10 (254mm) KM 42 42-6 -620 20 12 (305mm)
GROOVED DIRECTORS with tongue tie 1 2 (114mm) KM 42 42-6 -646 46 4 ⁄ KM 42 42-6 -647 47 5 (127mm) 1 2 (140mm) KM 42 42-6 -648 48 5 ⁄ KM 42 42-6 -649 49 6 (152mm) with probe and tongue tie KM 42 42-6 -654 54 5 (127mm) 1 2 (140mm) KM 42 42-6 -655 55 5 ⁄ KM 42 42-6 -656 56 6 (152mm)
1 french = .33mm
1 french = .33mm FRAZIER SUCTION TUBE 7 (178mm) KM 4242-82 823 3 6 fr fren ench ch KM 4242-82 824 4 7 fr fren ench ch KM 4242-82 825 5 8 fr fren ench ch KM 42-8 42-826 26 10 fren french ch KM 42-8 42-830 30 12 fren french ch
1 2 (140mm) BARON SUCTION TUBE 5 ⁄ KM 4242-832 832 3 fren french ch KM 4242-834 834 5 fren french ch KM 4242-836 836 7 fren french ch
YANKAUER SUCTION TUBE KM 58-228 KM 58-230 1 2 (2 11 ⁄ (292 92mm mm)) chr chrom ome e fron fr ontt tip tip only only
POOLE SUCTION TUBE 9 (229mm) chrome KM 42-844 KM 42-852 23 fre renc nch h cu curv rved ed 30 fr fre enc nch h st stra raiigh ghtt
®
SUTURE INSTRUMENTS
14
WACHENFELDT CLIP APPLYING AND REMOVING FORCEPS KM 42-256 5 (127mm)
MICHEL CLIP APPLYING AND REMOVING FORCEPS KM 42-248 5 (127mm) double ended
®
MICHEL CLIP APPL APPLYING YING FORCEPS KM 42-254 5 (127mm)
CASTROVIEJO MICRO TYING FORCEPS 4 (102mm) straight, with tying platform KM 53-450 KM 53-456 0.12mm 0.5mm 1x2 teeth 1x2 teeth
WACHENFELDT CLIP APPLYING AND REMOVING FORCEPS KM 42-258 5 (127mm) cross action
DESCHAMPS LIGATURE CARRIER 8 (203mm) KM 42-5 42-558 58 blu blunt nt left left KM 42-5 42-560 60 blu blunt nt righ rightt KM 42-5 42-562 62 sha sharp rp left left KM 42-5 42-564 64 sha sharp rp right right
HEMOSTATIC FORCEPS
15
1 / 1
1 / 1
KM 36-156
1 / 1
KM 36-158
1 / 1
KM 36-160 KM 36-162
1 / 1
1 / 1
KM 36-063
KM 36-067
1 / 1
1 / 1
KM 36 36-0 -076 76 KM 3636-078 078
HARTMANN MOSQUITO FORCEPS KM 36-063 KM 36-067 1 1 2 (89mm) 2 (89mm) 3 ⁄ 3 ⁄ straight curved
1 / 1
HALSTED MOSQUITO FORCEPS 5 (127mm) straight curved KM 36-156 KM 36-158 KM 36-160 delicate KM 36-162 delicate KM 36-076 1x2 teeth KM 36-078 1x2 teeth
1 / 1
KM 36-164 KM 36-165 1 / 1
KM 36-166
MICRO MOSQUITO extremely fine tips KM 36-164 5 (127mm) straight
FORCEPS
KM 36-165 5 (127mm) curved
KELLY FORCEPS KM 36-166 1 2 (140mm) 5 ⁄ straight
1 / 1
KM 36-168
KM 36-168 1 2 (140mm) 5 ⁄ curved
1 / 1
KM 36-196
1 / 1
KM 36-198
RANKIN-KELLY FORCEPS RANKIN-KELLY KM 36-196 KM 36-198 1 4 (159mm) 61 ⁄ 4 (159mm) 6 / straight curved
®
HEMOSTATIC FORCEPS
16
1 / 1
1 / 1
KM 36-176
1 / 1
KM 36-178
KM 36-306
straight KM 36 36-3 -306 06 KM 36 36-3 -316 16 KM 36 36-3 -326 26 KM 36 36-3 -336 36 KM 36 36-3 -346 46 KM 36 36-3 -356 56 KM 36 36-3 -360 60
CRILE FORCEPS straight curved 1 1 2 2 (140mm) KM 36-176 5 ⁄ KM 36-178 5 ⁄ 1 1 2 (140mm) KM 36-180 5 ⁄ 2 KM 36-182 5 ⁄ extra delicate extra delicate 1 1 4 4 (159mm) KM 36-186 6 ⁄ KM 36-188 6 ⁄
1 / 1
1 / 1
KM 36-308
curved KM 36 36-3 -308 08 KM 36 36-3 -318 18 KM 36 36-3 -328 28 KM 36 36-3 -338 38 KM 36 36-3 -348 48 KM 36 36-3 -358 58 KM 36 36-3 -362 62
1 2 5 ⁄ 1 4 6 ⁄ 1 4 7 ⁄ 8 9 10 12
51 ⁄ 2 (140mm) 61 ⁄ 4 (159mm) 71 ⁄ 4 (184mm) 8 (203mm) 9 (229mm) 10 (254mm) 12 (305mm)
ROCHESTER PEAN FORCEPS
1 / 1
KM 36-106
KM 36-108
1 / 1
KM 36-416
1 / 1
KM 36-418
straight KM 36 36-4 -406 06 KM 36 36-4 -416 16 KM 36 36-4 -426 26 KM 36 36-4 -436 36 KM 36 36-4 -446 46 KM 36 36-4 -456 56
PROVIDENCE HOSPITAL FORCEPS KM 36-106 KM 36-108 1 1 2 (140mm) 2 (140mm) 5 ⁄ 5 ⁄ straight curved
®
ROCHESTER-OCHSNER FORCEPS 1x2 teeth
1 / 1
1 / 1
KM 36-426
1 2 5 ⁄ 1 4 6 ⁄ 1 4 7 ⁄ 8 9 10
curved KM 36 36-4 -408 08 KM 36 36-4 -418 18 KM 36 36-4 -428 28 KM 36 36-4 -438 38 KM 36 36-4 -448 48 KM 36 36-4 -458 58
KM 36-428
1 2 5 ⁄ 1 4 6 ⁄ 1 4 7 ⁄ 8 9 10
(140mm) (159mm) (184mm) (203mm) (229mm) (254mm)
HEMOSTATIC FORCEPS
17
1 / 1
KM 36-744 1 / 1
1 / 1
KM 36-746
1 / 1
KM 49-620
KM 49-622
1 / 1
KM 36-557
1 / 1
KM 36-566
1 / 1
KM 49-624
JOHNS HOPKINS BULLDOG CLAMPS straight curved 1 1 2 2 (38mm) KM 49 49-6 -602 02 1 ⁄ KM 49 49-6 -618 18 1 ⁄ KM 49 49-6 -604 04 2 KM 49 49-6 -620 20 2 (51mm) 1 1 2 2 (64mm) KM 49 49-6 -606 06 2 ⁄ KM 49 49-6 -622 22 2 ⁄ KM 49 49-6 -608 08 3 KM 49 49-6 -624 24 3 (76mm) 1 1 2 2 (89mm) KM 49 49-6 -610 10 3 ⁄ KM 49 49-6 -626 26 3 ⁄
MIXTER FORCEPS fully curved 1 4 (133mm) delicate KM 36 36-5 -557 57 5 ⁄ 1 4 (159mm) KM 36 36-5 -562 62 6 ⁄ 1 4 (184mm) KM 36 36-5 -564 64 7 ⁄ KM 36 36-5 -566 66 9 (229mm)
ADSON HEMOSTATIC FORCEPS KM 36-744 KM 36-746 1 4 (184mm) 71 ⁄ 4 (184mm) 7 ⁄ straight curved
1 / 1
KM 59-064
1 / 1
1 / 1
KM 59-066
KM 36-818
1 / 1
1 / 1
KM 36-516 KM 36-518
ROCHESTER-CARMALT FORCEPS ROCHESTER-CARMALT straight curved 1 1 4 4 (159mm) KM 36 36-5 -516 16 6 ⁄ KM 36 36-5 -518 18 6 ⁄ KM 36 36-5 -536 36 8 KM 36 36-5 -538 38 8 (203mm)
FERGUSON ANGIOTRIBE FORCEPS straight curved 1 1 2 2 (165mm) KM 36 36-8 -816 16 6 ⁄ KM 36 36-8 -818 18 6 ⁄ 1 1 2 2 (191mm) KM 36 36-8 -826 26 7 ⁄ KM 36 36-8 -828 28 7 ⁄
SCHNIDT FORCEPS KM 59-064 KM 59-066 1 2 (191mm) 71 ⁄ 2 (191mm) 7 ⁄ half curved full curved
®
INTESTINAL FORCEPS
18
1 / 1
KM 43-105 1 / 1
ALLIS TISSUE FORCEPS KM 43 43-1 -1O5 O5 43 ⁄ 4 4x5 teeth delicat delicate e 3 4 4x5 teeth KM 43 43-1 -107 07 5 ⁄ teeth delicate delicate KM 43 43-1 -110 10 6 3x4 teet teeth h stand standard ard KM 43 43-1 -112 12 6 4x5 teet teeth h stand standard ard KM 43 43-1 -116 16 6 5x6 teet teeth h stand standard ard
(121mm) (121mm) (146mm) (146m m) (152mm (15 2mm)) (152mm (15 2mm)) (152mm (15 2mm))
ALLIS TISSUE FORCEPS KM 43-124 1 2 (191mm) 5x6 teeth 7 ⁄
1 / 1
ALLIS-JUDD TISSUE FORCEPS KM 43-168 6 (152mm) 3x4 teeth
1 / 1
KM 43-310
1 / 2
KM 43-524
BABCOCK FORCEPS 1 4 (159mm) KM 43 43-3 -310 10 6 ⁄ KM 43 43-3 -324 24 8 (203mm) 1 2 (241mm) KM 43 43-3 -326 26 9 ⁄
LAHEY VULSELLUM FORCEPS KM 36-696 1 4 (159mm) 3x3 prongs 6 ⁄
®
DOYEN CLAMP longitudinal serrations KM 43-520 KM 43-524 9 (229mm) 9 (229mm) straight curved
TUBING AND UTILITY FORCEPS
19
1 / 1
1 / 1
KM 37-448
PRESBYTERIAN TUBE OCCLUDING FORCEPS KM 37-444 7 (178mm) smooth
KM 58-500
VORSE TUBE OCCLUDING FORCEPS serrated 1 2 (140mm) KM 37 37-4 -448 48 5 ⁄ 1 4 (184mm) KM 37 37-4 -450 50 7 ⁄ KM 37 37-4 -452 52 8 (203mm)
1 / 1
KM 37-453
VORSE TUBE OCCLUDING FORCEPS serrated, with guard 1 2 (140mm) KM 37 37-4 -453 53 5 ⁄ 1 4 (184mm) KM 37 37-4 -454 54 7 ⁄ KM 37 37-4 -455 55 8 (203mm)
1 / 1
1 / 1
KM 58-502
MAGILL ENDOTRACHEAL CATHETER INTRODUCING FORCEPS KM 58-500 KM 58-502 7 (178mm) child 9 (229mm) adult
UTILITY AND STERILIZER FORCEPS straight curved KM 39 39-6 -644 44 8 KM 39 39-6 -648 48 8 (203mm) KM 39 39-6 -646 46 11 KM 39 39-6 -650 50 11 (279mm)
®
TOWEL AND SPONGE FORCEPS
20
JONES TOWEL FORCEPS KM 37-470 KM 37-478 1 1 2 (64mm) 4 (83mm) 2 ⁄ 3 ⁄
BACKHAUS TOWEL FORCEPS KM 37-458 KM 37-462 1 2 (89mm) 3 ⁄ 51 ⁄ 4 (133mm)
BACKHAUS-ROEDER TOWEL CLAMP KM 37-464 1 4 (133mm) with ball stops 5 ⁄
1 / 1
KM 37-386 KM 37-388 1 / 1
1 / 1
KM 37-466
LORNA (EDNA) TOWEL CLAMP KM 37-466 KM 37-468 1 4 (133mm) 4 (102mm) 5 ⁄ non-perforating non-perforating
®
PEERS TOWEL CLAMP KM 37-456 3 4 (146mm) 5 ⁄ non-perforating
FOERSTER SPONGE FORCEPS straig str aight, ht, ser serrat rated ed cur curved ved,, ser serrat rated ed KM 37 37-3 -366 66 7 KM 37 37-3 -368 68 7 (178mm) 1 1 2 2 (241mm) KM 37 37-3 -386 86 9 ⁄ KM 37 37-3 -388 88 9 ⁄ stra st raig ight ht,, sm smoo ooth th curve cu rved, d, sm smoo ooth th KM 37 37-3 -370 70 7 KM 37 37-3 -372 72 7 (178mm) 1 1 2 2 (241mm) KM 37 37-3 -390 90 9 ⁄ KM 37 37-3 -392 92 9 ⁄
DRESSING AND TISSUE FORCEPS
21
1 / 1
1 / 1
1 / 1
KM 39-076 KM 39-080
KM 38-076 1X2 teeth
2x3 teeth
DRESSING FORCEPS serrated 1 2 (114mm) KM 38 38-0 -076 76 4 ⁄ KM 38 38-0 -080 80 5 (127mm) 1 2 (140mm) KM 38 38-0 -084 84 5 ⁄ KM 38 38-0 -088 88 6 (152mm) KM 38 38-0 -094 94 8 (203mm) KM 38 38-1 -100 00 10 (254mm) KM 38 38-1 -106 06 12 (305mm)
TISSUE FORCEPS 1x2 teeth 1 2 (114mm) KM 38-264 4 ⁄ KM 38-268 5 (127m 27mm) m) 1 2 (140mm) KM 38-272 5 ⁄ KM 38-276 6 (152mm) KM 38-280 8 (203 03mm) mm) KM 38-286 10 (254mm) KM 38-290 12 (305mm)
3x4 teeth
2x3 teeth KM 38-292 38-292 5 (127mm) 1 2 (140mm) KM 38-296 38-296 5 ⁄
3x4 teeth
1 2 (140mm) KM 38-304 38-304 5 ⁄
SEMKEN FORCEPS serrated KM 39 39-0 -076 76 5 (127mm) KM 39 39-0 -086 86 6 (152mm) 1x2 teeth KM 39 39-0 -080 80 5 (127mm) KM 39 39-0 -088 88 6 (152mm)
1 / 1
KM 39-058
1 / 1
KM 39-062
1 / 1
KM 39-060 1 / 1
1 / 1
1 / 1
KM 39-056
KM 39-064
KM 39-066
1 / 1
1 / 1
1 / 1
KM 39-072
KM 39-068
ADSON DRESSING FORCEPS 3 4 (121mm) serrated 4 ⁄ KM 39-0 39-058 58 mic micro ro tip tip KM 39-06 39-060 0 del delica icate te tip tip KM 39-06 39-062 2 sta standa ndard rd tip tip KM 39-07 39-072 2 car carbid bide e tip
KM 39-070
3 4 (121mm) ADSON TISSUE FORCEPS 4 ⁄ 1x2 teeth 2x3 teeth KM 39-056 micro tip KM 39-068 KM 39-06 39-063 3 ser serrat rated ed tip tip KM 39-06 39-064 4 del delica icate te tip tip KM 39-06 39-066 6 sta standa ndard rd tip tip KM 39-070 39-070 deli delicate, cate, with with tying platfor platform m
®
DRESSING AND TISSUE FORCEPS
22
1 / 1
1 / 1
1 / 1
KM 39-057
1 / 1
KM 39-050
ADSON BROWN TISSUE FORCEPS KM 39-092 3 4 (121mm) 9x9 teeth 4 ⁄ side grasping
ADSON DRESSING AND TISSUE FORCEPS 6 (152mm) KM 39-05 39-057 7 mic micro ro 1x2 teet teeth h KM 39-059 39-059 mic micro ro serrate serrated d KM 3939-050 050 1x2 tee teeth th KM 3939-052 052 ser serrat rated ed
1 / 1
KM 39-136
DRESSING FORCEPS serrated with fluted handles 1 2 (114mm) KM 39 39-1 -128 28 4 ⁄ KM 39 39-1 -132 32 5 (127mm) 1 2 (140mm) KM 39 39-1 -136 36 5 ⁄ KM 39 39-1 -140 40 6 (152mm)
TISSUE FORCEPS 1x2 teeth with fluted handles 1 2 (114mm) KM 39 39-3 -310 10 4 ⁄ KM 39 39-3 -314 14 5 (127mm) 1 2 (140mm) KM 39 39-3 -318 18 5 ⁄ KM 39 39-3 -322 22 6 (152mm)
®
1 / 1
KM 39-059
1 / 1
KM 39-052
DRESSING AND TISSUE FORCEPS
23
1 / 1
KM 39-192 1 / 1
1 / 1
DRESSING FORCEPS KM 38-082 5 (127mm) curved fine point serrated
RUSSIAN TISSUE FORCEPS KM 39 39-1 -192 92 6 (152mm) KM 39 39-1 -196 96 8 (203mm) KM 39 39-1 -198 98 10 (254mm)
1 / 1 1 / 1
1 / 1
FERRIS-SMITH TISSUE FORCEPS 7 (178mm) with platform KM 38-3 38-322 22 1x2 teet teeth h KM 38-3 38-324 24 2x3 teet teeth h ″
1 / 1
1 / 1
1 / 1
KM 49-168 KM 49-170 KM 49-172
DEBAKEY ATRAUMATIC TISSUE FORCEPS 1 4 (159 KM 49 49-1 -168 68 6 ⁄ 159mm mm)) 1. 1.5m 5mm m KM 49 49-1 -170 70 8 (203 203mm mm)) 1. 1.5m 5mm m 1 4 (235 KM 49 49-1 -172 72 9 ⁄ 235mm mm)) 1. 1.5m 5mm m 1 4 (159 KM 49 49-1 -180 80 6 ⁄ 159mm mm)) 2. 2.0m 0mm m KM 49 49-1 -182 82 8 (203 203mm mm)) 2. 2.Om Omm m 1 4 (235 KM 49 49-1 -184 84 9 ⁄ 235mm mm)) 2. 2.0m 0mm m 1 4 (159 KM 49 49-2 -210 10 6 ⁄ 159mm mm)) 3. 3.5m 5mm m KM 49 49-2 -212 12 8 (203 203mm mm)) 3. 3.5m 5mm m 1 4 (235 KM 49 49-2 -216 16 9 ⁄ 235mm mm)) 3. 3.5m 5mm m
ADSON BAYONET FORCEPS KM 39-074 81 / 4 (210mm) straight with serrated tips ″
CUSHING BAYONET 1 4 TISSUE FORCEPS 7 / (184mm) KM 38-1 38-186 86 1x2 teet teeth h KM 38-18 38-184 4 ser serrat rated ed ″
®
DRESSING AND TISSUE FORCEPS
24
1 / 1
1 / 1
1 / 1
KM 53-404 KM 53-408
1 / 1
KM 53-374
1 / 1
1 / 1
KM 53-382
KM 53-384
1 / 1
KM 53-420
KM 53-422
GRAEFE EYE DRESSING FORCEPS 1 2 (64mm) 2 ⁄ KM 53-404 strai straight ght serrat serrated ed KM 53-408 53-408 cur curved ved serrat serrated ed KM 53-420 strai straight ght 1x2 teeth teeth KM 53-42 53-422 2 cur curved ved 1x2 1x2 teeth teeth
KM 39-450 #3 3 4 (121mm) 4 ⁄ narrow fine
1 / 1
KM 53-372
KM 39-451 #3C 3 8 (111mm) 4 ⁄ narrow fine
SWISS JEWELERS STYLE FORCEPS
®
EYE DRESSING FORCEPS 4 (102mm) serrated KM 5353-368 368 str straig aight ht KM 53-37 53-372 2 hal halff curved curved KM 53-37 53-374 4 ful fulll curved curved
KM 39-452 #4 3 8 (111mm) 4 ⁄ fine
KM 39-453 #5 43 ⁄ 8 (111mm) extra fine
IRIS FORCEPS 4 (102mm) 1x2 teeth KM 53-3 53-380 80 str straig aight ht KM 53-3 53-382 82 hal halff curve curved d KM 53-3 53-384 84 ful fulll curve curved d
KM 39-455 #6 1 2 (114mm) 4 ⁄ angled pickup
KM 39-456 #7 1 2 (114mm) 4 ⁄ curved fine
SPLINTER FORCEPS
25
1 / 1
KM 39-366
1 / 1
KM 39-410
1 / 1
KM 39-412
1 / 1
KM 39-386
FEILCHENFELD FORCEPS serrated KM 39-386 KM 39-390 1 1 4 (83mm) 2 (114mm) 3 ⁄ 4 ⁄
PLAIN SPLINTER FORCEPS serrated KM 39-364 KM 39-366 1 1 2 (89mm) 2 (114mm) 3 ⁄ 4 ⁄
CARMALT SPLINTER FORCEPS serrated CARMALT KM 39-410 KM 39-412 1 1 4 (108mm) st 4 (108mm) curved 4 ⁄ straight 4 ⁄
1 / 1 1 / 1
KM 39-509
VIRTUS SPLINTER FORCEPS KM 39-478 6 (152mm) straight serrated
VANGUARD SPLINTER LIBERATOR KM 39-534 KM 39-536 5 (127 127mm mm), ), tro troca carr in tr troc ocar ar poi point nt onl onlyy reversible handle
1 / 1
KM 39-511
WILLIAMS SPLINTER FORCEPS serrated 1 2 (140mm) straight KM 39 39-5 -509 09 5 ⁄ 1 4 (133mm) 45 degree angled KM 39 39-5 -511 11 5 ⁄ 1 2 (140mm) 90 degree angled KM 39 39-5 -513 13 5 ⁄
®
NEEDLE HOLDERS
26
Our carbide needle holders have TC inserts firmly bonded to the inside of both jaws. We guarantee them for three years. The surface profiles of the inserts have been precision milled to provide the surgeon with a firm, non-slip grip on the needle. Because the carbide is harder than the steel of the needles, carbide needle holders last much longer than ordinary ones The finger rings are gold plated for easy identification.
1 / 1
1 / 1
KM 41-092 KM 41-094 1 / 1
1 / 1
KM 41-064 KM 41-066
1 / 1
1 / 1
KM 41-164 KM 41-166
HALSEY NEEDLE HOLDER KM 41-064 5 (127mm) smooth KM 41-065 5 (127mm) smooth carbide 1 4 (133mm) serrated KM 41-066 5 ⁄ KM 41-067 5 (127mm) serrated carbide
HEGAR BAUMGARTNER NEEDLE HOLDER KM 41-162 5 (127mm) serrated 3 4 (146mm) serrated KM 41-164 5 ⁄ KM 41-166 5 (127mm) serrated carbide
DERF NEEDLE HOLDER KM 41-092 KM 41-094 3 3 4 (121mm) 4 (121mm) carbide 4 ⁄ 4 ⁄ hori ho rizo zont ntal al se serr rrat atio ions ns cros cr osss se serr rrat atio ions ns
1 / 1 1 / 1
1 / 1
KM 41-106
KM 41-068
WEBSTER NEEDLE HOLDER smooth KM 41-068 KM 41-070 5 (127mm) 5 (127mm) carbide
®
COLLIER NEEDLE HOLDER KM 41-104 5 (127mm) fenestrated jaws serrated
NIEVERT NEEDLE HOLDER smooth, one offset finger ring KM 41-106 KM 41-108 5 (127mm) 5 (127mm) carbide
NEEDLE HOLDERS
27
1 / 1
1 / 1
1 / 1
KM 41-270
KM 41-130
KM 41-302
MAYO HEGAR NEEDLE HOLDER serrated KM 41 41-2 -270 70 51 ⁄ 4 carbide (133mm) KM 41 41-300 5 (127mm) KM 41 41-2 -272 72 6 KM 41 41-3 -302 02 6 (152mm) KM 41 41-2 -278 78 7 KM 41 41-3 -308 08 7 (178mm) KM 41 41-2 -284 84 8 KM 41 41-3 -314 14 8 (203mm) 1 1 2 KM 41 2 (267mm) KM 41 41-2 -286 86 10 ⁄ 41-3 -316 16 10 ⁄
BROWN NEEDLE HOLDER fine serrations KM 41-130 KM 41-132 1 1 4 (133mm) 4 (184mm) 5 ⁄ 7 ⁄ convex jaws convex jaws
1 / 1
1 / 1
KM 41-170 KM 41-174
CRILE-WOOD (DEBAKEY) NEEDLE HOLDER serrated carbide KM 41 41-1 -170 70 6 KM 41 41-1 -174 74 KM 41 41-1 -171 71 7 KM 41 41-1 -175 75 KM 41 41-1 -172 72 8 KM 41 41-1 -176 76 KM 41 41-1 -173 73 9 KM 41 41-1 -178 78
6 (152mm) 7 (178mm) 8 (203mm) 9 (229mm)
1 / 1 1 / 1
KM 41 41--424 KM 41 41--440
1 / 1
KM 41-428 KM 41-448
Combination needle holder and suture scissors.
OLSEN-HEGAR NEEDLE HOLDER
KM 41 41-4 -424 24 KM 41 41-4 -426 26 KM 41 41-4 -428 28 KM 41 41-4 -432 32 KM 41 41-4 -434 34
3 4 (121mm) delicate serrated* 4 ⁄ 3 4 (121mm) delicate smooth* 4 ⁄ 1 2 (140mm) serrated 5 ⁄ 1 2 (165mm) serrated 6 ⁄ 1 2 (191mm) serrated 7 ⁄
carbide KM 41 41-4 -440 40 KM 41 41-4 -446 46 KM 41 41-4 -448 48 KM 41 41-4 -452 52 KM 41 41-4 -454 54
3 4 (121mm) delicate serrated* 4 ⁄ 3 4 (121mm) delicate smooth* 4 ⁄ 1 2 (140mm) serrated 5 ⁄ 1 2 (165mm) serrated 6 ⁄ 1 2 (191mm) serrated 7 ⁄
*For suture sizes 5-0, 6-0, 7-0 only.
Combination needle holder and suture scissors. GILLIES NEEDLE HOLDER KM 41-333 61 ⁄ 2 (165mm) curved one fenestrated jaw one angled finger ring
®
NEEDLE HOLDERS
28
KM 41-240
KM 41-257
KM 42-148
SAROT NEEDLE HOLDER serrated carbide 1 2 KM 42-148 7 ⁄ KM 42-152 71 ⁄ 2 (191mm) 1 1 2 2 (267mm) KM 42-150 10 ⁄ KM 42-154 10 ⁄
1 / 1
1 / 1
1 / 1
RYDER NEEDLE HOLDER serrated carbide KM 41-257 5 (127 27mm mm)) KM 41 41-2 -266 66 8 (203mm) KM 41-264 6 (152 52mm mm)) KM 41 41-2 -267 67 9 (229mm) 1 4 (260mm) KM 41-265 7 (178 78mm mm)) KM 41 41-2 -268 68 10 ⁄
RYDER MICRO NEEDLE HOLDER serrated carbide KM 41-240 5 (127 27mm mm)) KM 41 41-2 -24 46 8 (203mm) KM 41-242 6 (152 52mm mm)) KM 41 41-2 -24 48 9 (229mm) KM 41-244 7 (178mm)
1 / 1 1 / 1
KM 41-198
MATHIEU NEEDLE HOLDER serrated KM 41-198 KM 41-200 1 1 2 (140mm) 2 (140mm) carbide 5 ⁄ 5 ⁄
®
1 / 1
1 / 1
1 / 1
KM 42-196 KM 42-198
KM 42-186 KM 42-188
CASTROVIEJO MICRO NEEDLE HOLDER 1 2 (140mm) smooth, with lock 5 ⁄ carbide KM 42 42-186 straight KM 42 42-190 straight KM 42-188 curved KM 42-192 curved
CASTROVIEJO MICRO NEEDLE HOLDER 1 2 (140mm) extra delicate, smooth, with lock 5 ⁄ KM 42-1 42-196 96 str straig aight ht KM 42-1 42-198 98 cu curv rved ed
SKIN HOOKS
29
1 / 1 1 / 1
1 / 1
KM 54-346
WIENER SKIN HOOK 5 (127mm) KM 54-346 KM 54-348 one sharp prong one blunt prong 3.5mm diameter 3.5 3. 5mm diameter
KMEDIC SKIN HOOK KM 52-055 3 4 (121mm) one sharp prong 4 ⁄ 2mm diameter
1 / 1
COTTLE SKIN HOOK KM 52-050 51 ⁄ 2 (140mm) one sharp prong large deep curve 4mm diameter
1 / 1
KM 54-338 KM 54-342 1 / 1
1 / 1
KM 48-158 KM 48-161
1 / 1
FRAZIER HOOK 5 (127mm) KM 48-158 KM 48-161 one sharp prong one blunt prong 2.5mm diameter 2.5m 5mm m diameter
TYRELL HOOK 5 (127mm) KM 54-338 KM 54-342 one sharp prong one blunt prong 1.5mm diameter 1.5 1. 5mm diameter
GUTHRIE HOOK KM 54-350 5 (127mm) 2 sharp prongs 2.5mm wide
®
SKIN HOOKS AND FINGER RETRACTORS
30
1 / 1
1 / 1
KM 58-077
KM 58-083
1 / 1
1 / 1
KM 52-060
GILLIES HOOK 7 (178mm) KM 58-077 KM 58-083 2mm diameter 3mm diameter
1 / 1
FREER SKIN HOOK 6 (152mm) KM 52-040 KM 52-042 2 sharp prongs 2 blunt prongs 2mm wide 2mm wide
1 / 1
KM 52-064
KLEINERT-KUTZ HOOK 6 (152mm) KLEINERT-KUTZ KM 52-060 3mm diameter KM 52-064 5mm diameter KM 52-068 7mm diameter
1 / 1
KM 58-091
KM 58-092 1 / 1
1 / 1
KM 52-088 1 / 1
KM 52-082 1 / 1
KM 52-090
1 / 1
KM 52-086
1 / 1
KM 58-093
KM 58-094
1 / 1
KM 52-087
1 4 (159 JOSEPH HOOK 6 ⁄ (159mm mm)) sha sharp rp KM 58-088 1 prong KM 58-091 2 prongs 2mm wide KM 58-092 2 prongs 5mm wide KM 58-093 2 prongs 7mm wide KM 58-094 2 prongs 10mm wide
®
3 4 (121mm) LAHEY RETRACTOR 4 ⁄ KM 52-082 1 sharp prong KM 52-086 2 sharp prongs KM 52-087 3 sharp prongs
SENN RETRACTOR 3 prongs KM 52-088 KM 52-090 1 4 (159mm) 6 ⁄ 61 ⁄ 4 (159mm) sharp blunt
FINGER RETRACTORS
31
1 / 1
1 / 2
KM 54-368
KM 52-174
KM 52-156
1 / 1 1 / 2
KM 54-366 KM 54-372
BLAIR (ROLLET) RETRACTOR 1 2 (140mm) 5 ⁄ KM 54-366 4 sharp prongs, rigid KM 54-368 4 blunt prongs, rigid KM 54-372 4 sharp prongs, flexible
KM 52-176
1 / 2
KM 52-158
1 / 1
KM 52-182
KM 52-162
RIGID RAKE RETRACTOR 1 2 (165mm) 6 ⁄ KM 52-1 52-156 56 1 sharp sharp pron prong g KM 52-15 52-158 8 2 sharp sharp prong prongss KM 52-16 52-162 2 3 sharp sharp prong prongss KM 52-16 52-164 4 1 blunt blunt prong prong KM 52-16 52-166 6 2 blunt blunt prong prongss KM 52-17 52-172 2 3 blunt blunt prong prongss
FLEXIBLE RAKE RETRACTOR 61 ⁄ 4 (159mm) KM 52-1 52-174 74 1 sharp sharp prong prong KM 52-176 52-176 2 sharp sharp prong prongss KM 52-182 52-182 3 sharp sharp prong prongss KM 52-1 52-184 84 1 blunt blunt pron prong g KM 52-188 52-188 2 blunt blunt prong prongss KM 52-192 52-192 3 blunt blunt prong prongss
1 / 1
1 / 1 1 / 1
Fine cross serrations help prevent slippage.
RAGNELL RETRACTOR KM 52-094 3 4 (146mm) double ended 5 ⁄ 4mm width x 8mm depth blade and 6mm width x 15mm depth blade
LINDE-RAGNELL RETRACTOR KM 69-982 51 / 4 (133mm) double ended with serrations 4mm width x 8mm depth blade and 6mm width x 15mm depth blade ″
DAVIS RETRACTOR DAVIS RET RACTOR KM 52-076 6 (152mm) double ended 6mm width x 17mm depth blade and 9mm width x 20mm depth blade ″
®
RETRACTORS
32
1 / 2 KM 52-254 1 / 2
1 / 2 KM 52-258
1 / 2 KM 52-262
1 / 2 KM 52-264
1 / 2 KM 52-266
1 / 2
KM 52 52-1 -198 98 KM 52 52-2 -202 02
1 / 2
1 / 2
KM 52-204
KM 52-206
1 2 (114mm) VOLKMAN RETRACTOR 4 / KM 52-19 52-198 8 2 sharp sharp prong prongss KM 52-20 52-202 2 3 sharp sharp prong prongss KM 52-20 52-204 4 4 sharp sharp prong prongss KM 52-20 52-206 6 6 sharp sharp prong prongss KM 52-20 52-208 8 2 blunt blunt prong prongss KM 52-21 52-212 2 3 blunt blunt prong prongss KM 52-21 52-214 4 4 blunt blunt prong prongss KM 52-21 52-216 6 6 blunt blunt prong prongss ″
1 / 1 KM 52-092
sharp KM 52 52-2 -254 54 KM 52 52-2 -258 58 KM 52-26 52-262 2 KM 52-26 52-264 4 KM 52-26 52-266 6
1 2 3 4 6
prong pro ng pron pr ongs gs prongs prongs prongs prongs prongs prongs
blunt KM 52 52-2 -268 68 KM 52-27 52-272 2 KM 52-27 52-274 4 KM 52-27 52-276 6
2 3 4 6
prongs pron gs 8m 8mm m prongs pro ngs 13mm 13mm prongs 18m prongs 18mm m prongs 28m prongs 28mm m
10mm de 10mm dept pth h 8mm 8m m widt width hX 13mm 13m m width width X 18mm 18m m width width X 28mm 28m m width width X width widt hX width wid th X width X width width X width
10mm 10m m dept depth h 10mm 10 mm depth depth 10mm depth 10mm depth 10mm depth 10mm depth 10mm 10m m dept depth h 10mm 10 mm depth depth 10mm depth 10mm depth 10mm depth 10mm depth
1 2 (216mm) with ring handle VOLKMAN RETRACTOR 8 / ″
1 / 1 KM 52-093
1 / 1
1 / 1
MATHIEU RETRACTOR MATHIEU RET RACTOR 61 / 4 (159mm) KM 52-092 KM 52-093 3 sha sharp rp pr pron ongs gs 3 blu blunt nt pr pron ongs gs ″
®
JACKSON TRACHEAL HOOK KM 52-096 3 4 (146mm) sharp 5 / ″
SMITHWICK HOOK AND DISSECTOR KM 49-320 12 (305mm) double ended ″
RETRACT0RS
33
1 / 1
1 / 1
1 / 1
KM 52-116 #1
KM 52-118 #2
KM 52-122 #3
1 / 1
1 / 1
KM 52-124 #4
KM 52-128 #5
1 / 1
KM 52-130 #6
MEYERDING FINGER RETRACTOR 7 (178mm)
CRILE RETRACTOR KM 51-468 43 /8 (11 (111mm 1mm)) double ended
″
″
1 / 1
KM 51-530 1 / 1
LAHEY RETRACTOR KM 51-528 73 /4 (195mm) ″
1 / 1
LITTLE RETRACTOR KM 51-520 73 /4 (195mm) ″
LOVE NERVE RETRACTOR 81 /2 (216mm) KM 51-530 51-530 7mm blade blade stra straigh ightt KM 51-532 51-532 7mm blade blade angled 45 degrees degrees KM 51-534 51-534 7mm blade blade angled 90 degrees degrees ″
®
RETRACTORS
34
1 / 1
1 / 1
GREEN RETRACTOR KM 51-524 1 2 (216mm) fenestrated handle 8 / ″
GOELET RETRACTOR KM 51-376 1 2 (191mm) double ended 7 / ″
1 / 1
1 / 1
1 / 1
KM 51-100 #1 3 1 8 x 1 /4 / (10 x 32mm)
KM 51-104 #2 3 1 8 x 1 /2 / (10 x 38mm)
″
″
″
″
1 / 1
1 / 1
KM 51-108 #3 1 1 2 x 1 /2 / (13 x 38mm) ″
″
1 / 1
KM 51-112 #4 5 1 8 x 1 /2 / (16 x 38mm) ″
CUSHING VEIN RETRACTOR KM 51-521 9 (229mm (229mm)) fenes fenestrate trated d handl handle e ″
®
CUSHING VEIN RETRACTOR KM 51-523 8 (203mm (203mm)) 10mm blade blade ″
″
LANGENBECK RETRACTOR 8 (203mm) ″
RETRACTORS
35
1 / 1
KM 51-202
1 2 (241mm) RICHARDSON RETRACTOR 9 / 3 4 wide x 1 long blade KM 51-200 / KM 51-200 (19mm wide x 25mm long blade) 1 4 long blade KM 51 51-2 -202 02 1 wide x 1 / KM 51-200 (25mm wide x 32mm long blade) 1 1 2 wide x 1 /2 long blade KM 51 51-2 -204 04 1 / KM 51-200 (38mm wide x 38mm long blade) ″
″
″
″
″
″
RICHARDSON RETRACTOR KM 51-206 1 2 (241mm) 9 / 3 4 wide x 2 long blade / (19mm wide x 51mm long blade) ″
″
″
RICHARDSON-EASTMANN RETRACTOR 1 2 KM 51 51-2 -212 12 9 / (241mm) small 1 4 (260mm) large KM 51 51-2 -214 14 10 / KM 51-2 51-210 10 set of two two ″
″
″
®
RETRACTORS
36
1 / 1
1 / 1
KM 51-240
KM 51-218
KELLY RETRACTOR 93 /4 (248mm) with loop handle 1 2 x 2 bl KM 51 51-2 -216 16 1 / blad ade e (3 (38m 8mm m x 51m 51mm) m) 1 2 KM 51 51-2 -218 18 2 x 2 / blade bla de (5 (51m 1mm m x 64 64mm mm)) 1 2 KM 51 51-2 -220 20 2 / x 3 blade (64 (64mm mm x 76mm) 76mm) KM 51 51-2 -222 22 3 x 21 /2 bla blade de (76 (76mm mm x 64mm 64mm)) ″
″
″
″
″
″
″
″ ″
DEAVER RETRACTOR hollow grip handle KM 51 51-2 -230 30 1 wide x 10 long bl blade (25mm x 254mm) KM 51 51-2 -232 32 1 wide x 12 long bl blade (25mm x 305mm) KM 51 51-2 -234 34 1 wide x 13 long bl blade (25mm x 330mm) KM 51 51-2 -240 40 2 wide x 12 long bl blade (51mm x 305mm) 1 1 2 wide x 14 /2 long blade KM 51 51-2 -236 36 2 / blade (64mm x 368mm) 368mm) KM 51 51-2 -242 42 3 wide x 12 long bl blade (76mm x 305mm) 1 2 wide x 12 lo KM 51 51-2 -238 38 3 / long ng bl blad ade e (8 (89m 9mm m x 30 305m 5mm) m) ″
″
″
″
″
″
″
″
″
″
″
®
″
″
″
RETRACTORS
37
1 / 1 1 / 1
KM 51-482
ROUX RETRACTOR 1 4 (133mm) small KM 51 51-4 -498 98 5 / 3 / 4 x 1 (19mm x 25mm) 3 4 (146mm) medium KM 51 51-5 -500 00 5 / 7 3 8 / 8 x 1 / (22mm x 35mm) 5 8 KM 51 51-5 -502 02 6 / (173mm) large 1 x 15 / 8 (25mm x 41mm) ″
″
PARKER RETRACTOR double ended, set of two KM 51 51-480 KM 51-482 1 4 5 (127mm) set 7 / (184mm) set ″
″
″
″
″
″
″
″
MAYO-COLLINS RETRACTOR MAYO-COLLINS KM 51-388 6 (152mm) double ended, set of two ″
″
RIBBON RETRACTOR malleable KM 51 51-7 -752 52 6 x 1 / 2 (152mm x 13mm) 1 2 x 1 KM 51 51-7 -755 55 7 / (191mm x 25mm) KM 51 51-7 -766 66 13 x 3 / 4 (330mm x 19mm) KM 51 51-7 -768 68 13 x 1 (330mm x 25mm) 1 4 KM 51 51-7 -770 70 13 x 1 / (330mm x 32mm) 1 2 KM 51 51-7 -772 72 13 x 1 / (330mm x 38mm) KM 51 51-7 -776 76 13 x 2 (330mm x 51mm) ″
″
″
″ ″
PARKER-MOTT RETRACTOR KM 51-494 6 (152mm) double ended, set of two ″
U.S. ARMY RETRACTOR KM 51-372 81 / 4 (210mm) double ended, set of two
For more large retractors, refer to Section B in our Orthopedic Sourcebook ™ .
″
″ ″
″
″
″
″ ″
″
″
®
SELF-RETAINING SELF-RET AINING RETRACTORS
38
1 / 1
KM 52-416
ALM RETRACTOR 4 blunt prongs KM 52-414 KM 52-416 23 / 4 (70mm) 4 (102mm) ″
SELF RETAINING RETRACTORS 4 (102mm) KM 52-417 KM 52-418 4 sharp prongs 4 blunt prongs
GELPI RETRACTOR sharp points KM 52 52-7 -776 76 31 / 2 (89mm) KM 52 52-7 -778 78 41 / 2 (114mm) KM 52 52-7 -780 80 51 / 2 (140mm) KM 52 52-7 -768 68 71 / 2 (191mm) KM 52 52-7 -769 69 7 with ball stops (178mm)
″
″
″ ″ ″ ″
″
1 / 1
1 / 1
KM 52-532 1 / 1
KM 52-498
WEITLANER RETRACTOR sharp po points blunt points 2x3 teeth 2x3 teeth KM 52 52-4 -492 92 4 KM 52 52-4 -494 94 4 ″
3x4 teeth KM 52 52-4 -498 98 KM 52 52-5 -502 02 KM 52 52-5 -504 04 KM 52 52-5 -506 06
″ ″
(102mm)
″
1 2 5 / 1 2 6 / 8 1 2 9 /
″ ″
″
″
3x4 teeth KM 52 52-5 -518 18 KM 52 52-5 -522 22 KM 52 52-5 -524 24 KM 52 52-5 -526 26
®
1 2 5 / 1 2 6 / 8 1 2 9 /
(140mm) (165mm) (203mm) (241mm)
″ ″
″
BECKMAN-WEITLANER RETRACTOR hinged blades 3x4 sharp prongs KM 52 52-5 -530 30 51 / 2 (140m (140mm) m) 15mm depth depth x 20mm 20mm height height KM 52 52-5 -532 32 61 / 2 (165m (165mm) m) 15mm depth depth x 20mm 20mm height height KM 52 52-5 -534 34 81 / 2 (216m (216mm) m) 17mm depth depth x 22mm 22mm height height KM 52 52-5 -542 42 91 / 2 (241m (241mm) m) 24mm depth depth x 22mm 22mm height height
″
″ ″
3x4 blunt prongs KM 52 52-5 -536 36 51 / 2 (140m (140mm) m) KM 52 52-5 -538 38 61 / 2 (165m (165mm) m) KM 52 52-5 -540 40 81 / 2 (216m (216mm) m) KM 52 52-5 -544 44 91 / 2 (241m (241mm) m) ″ ″ ″ ″
15mm 15mm 17mm 24mm
depth de pth depth depth depth depth depth depth
x x x x
20mm 20m m 20mm 20mm 22mm 22mm 22mm 22mm
heightt heigh height height height height height height
KM 52-538
SELF-RETAINING SELF-RET AINING RETRACTORS
39
1 / 1
BECKMAN-EATON RETRACTOR KM 52-476 1 2 12 / (317mm) hinged blades 7x7 sharp prongs 45mm depth x 45mm height ″
®
SELF-RETAINING SELF-RET AINING RETRACTORS
40
1 / 1
1 / 1
KM 52-470
BECKMAN RETRACTOR KM 52-470 1 4 (311mm) 12 / with hinged blades 4x4 sharp prongs 17m 7mm m dep deptth x 27 27m mm he heig igh ht
KM 52-472 1 4 (311mm) 12 / with hinged blades 4x4 blunt prongs 17m 17 mm de dept pth h x 27m 27mm m he heig ight ht
″
″
®
ADSON RETRACTOR KM 52-474 13 (330mm) with hinged blades 4x5 blunt prongs ″
RETRACTORS AND DILATORS
41
1 / 3
1 / 4
BALFOUR RETRACTOR Pediatric KM 52-380 1 2 (89mm) spread, fenestrated 3 /
BALFOUR RETRACTOR Adult KM 52-358 7 (178mm) spread, fenestrated
″
″
1 / 1
TROSSEAU DILATOR KM 61-338 1 4 (133mm) bi-valve 5 / ″
LA BORDE DILATOR KM 61-344 1 2 (140mm) tri-valve 5 / ″
®
ELEVATORS
42
1 / 1
1 / 1
1 / 1
KM 57-620
KM 57-622
1 2 (140mm) MCKENTY ELEVATOR 5 ⁄ KM 57-620 KM 57-622 4mm wide 5mm wide
FREER ELEVATOR KM 57-614 1 2 (191mm) one sharp and 7 ⁄ one blunt blade, 5mm wide
1 / 1
1 / 1
1 / 1
1 / 1
KEY PERIOSTEAL ELEVA ELEVATOR TOR 1 4 KM 46 46-2 -258 58 7 (178mm) ⁄ (6mm) wide 1 3 2 (191mm) ⁄ 8 (10mm) wide KM 46 46-2 -260 60 7 ⁄ 1 1 2 (191mm) ⁄ 2 (13mm) wide KM 46 46-2 -262 62 7 ⁄ 3 4 (19mm) wide KM 46 46-2 -264 64 8 (203mm) ⁄ 1 4 (21 KM 46 46-2 -266 66 8 ⁄ 210m 0mm m) 1 (25mm) wide
KM 46-224
KM 58-076
KM 49-310
KM 49-311
1 / 1
KM 46-222
1 / 1
KM 49-313
SAYRE PERIOSTEAL ELEVATOR 1 2 (165mm) 6 ⁄ KM 58-075 KM 58-076 sharp blunt double ended double ended
®
LANGENBECK PERIOSTEAL ELEVATOR 7 (178mm) KM 46-222 KM 46-224 7mm wide 18mm wide blunt edge sharp edge
KM 49-312
ADSON PERIOSTEAL ELEVA ELEVATOR TOR 3 4 (171mm) 6 ⁄ KM 49-310 straight sharp KM 49-311 curved blunt KM 49-313 straight semi-sharp KM 49-312 curved semi-sharp
CURETTES
43
1 / 1
1 / 1 1 / 1
MARTINI BONE CURETTE KM 29-620 1 2 (140mm) double ended 5 ⁄ 4mm and 5mm round cups
WILLIGER BONE CURETTE KM 29-630 1 2 (140mm) double ended 5 ⁄ 3mm and 4mm oval cups
VOLKMANN CURETTE KM 46-550 61 ⁄ 2 (165mm) double ended oval cups
5/0
4/0
3/0
2/0
0
1
1 / 1
1 / 1
2
3
7 (178mm) KM 46-511 #5/0 KM 46-512 #4/0 KM 46-513 #3/0 KM 46-515 #2/0 KM 46-517 #0 #0 KM 46-519 #1 #1 KM 46-521 #2 #2 KM 46-523 #3 #3 KM 46-525 #4 #4 KM 46 46-5 -529 29 #5 KM 46 46-5 -531 31 #6
KM 46-560
4
5
6
9 (229mm) KM 46-563 #3/0 KM 46-564 #2/0 KM 46-565 #0 KM 46-566 #1 KM 46-567 #2 KM 46-568 #3 KM 46-569 #4 KM 46-570 #5 KM 46-571 #6
KM 46-562
VOLKMANN CURETTE oval and round cups KM 46-560 5 (127mm) double ended KM 46-562 61 ⁄ 2 (165mm) double ended KM 46-561 8 (203mm) double ended
BRUN (SPRATT) CURETTE oval cup
®
OSTEOTOMES
44
4mm
10mm
12mm
8mm
25mm
5 (127mm) straight without calibration lines KM 46 46-336 4mm KM 46-34 46-343 3 14m 14mm m KM 46 46-338 6mm KM 4646-34 345 5 15m 15mm m KM 46 46-340 8mm KM 4646-34 346 6 18m 18mm m KM 46 46-3 -342 42 10 10mm mm KM 4646-34 347 7 19m 19mm m KM 46 46-3 -344 44 12 12mm mm KM 4646-33 335 5 20m 20mm m 7 (178 (178mm) mm) straig straight ht with calibration lines KM 46 46-348 4mm KM 4646-35 352 2 12m 12mm m KM 46 46-349 5mm KM 46-35 46-353 3 16m 16mm m KM 46 46-350 6mm KM 4646-35 354 4 19m 19mm m KM 46 46-358 8mm KM 4646-35 355 5 22m 22mm m KM 46 46-3 -351 51 10 10mm mm KM 4646-35 356 6 25m 25mm m
U.S. ARMY PATTERN OSTEOTOME 1 2 (165mm) 6 ⁄ KM 4646-284 284 6mm wid wide e KM 4646-286 286 12m 12mm m wide wide KM 4646-288 288 18m 18mm m wide wide
1 / 1
1 / 1
KM 58-102
KM 58-104
9 (229 (229mm) mm) straig straight ht without calibration lines KM 46-304 1 ⁄ 4 (6mm) KM 46-306 1 ⁄ 2 (13mm) KM 46-310 3 ⁄ 4 (19mm) KM 46-314 1 (25mm) KM 46 46-3 -318 18 11 ⁄ 4 (32mm) KM 46 46-3 -322 22 11 ⁄ 2 (38mm)
LAMBOTTE OSTEOTOME
straight KM 46-497 KM 46-498 KM 46-499 KM 46-500 KM 46-501 KM 46-502 KM 46-503 KM 46-504 curved KM 46-700 KM 46-701 KM 46-702 KM 46-703 KM 46-704 KM 46-706 KM 46-708 KM 46-709
⁄ 8 (3mm) 3 16 (4mm) ⁄ 16 1 ⁄ 4 (6mm) 5 16 (8mm) ⁄ 16 3 ⁄ 8 (1Omm) 1 ⁄ 2 (13mm) 5 ⁄ 8 (16mm) 3 ⁄ 4 (19mm) 1
®
KM 46 46-268 2mm KM 46 46-270 4mm KM 46 46-272 6mm KM 46 46-274 8mm KM 46 46-2 -276 76 1Omm 1Omm KM 46 46-2 -278 78 12 12mm mm KM 46 46-2 -280 80 15 15mm mm
⁄ 8 (3mm) 3 16 (4mm) ⁄ 16 1 ⁄ 4 (6mm) 5 16 (8mm) ⁄ 16 3 ⁄ 8 (1Omm) 1 ⁄ 2 (13mm) 5 ⁄ 8 (16mm) 3 ⁄ 4 (19mm) 1
1 4 (133mm HOKE OSTEOTOME 5 ⁄ (133mm)) strai straight ght
SILVER OSTEOTOME SILVER 7 (178m (178mm) m) singl single e guard KM 5858-100 100 str straig aight ht KM 58-10 58-102 2 gua guard, rd, righ rightt KM 58-1 58-104 04 gua guard, rd, left left
9 (22 (229mm 9mm)) cur curved ved without calibration lines 1 4 KM 46-328 ⁄ (6mm) 1 2 (13mm) KM 46-329 ⁄ 3 4 (19mm) KM 46-330 ⁄ KM 46-331 1 (25mm) 1 4 (32mm) KM 46 46-3 -332 32 1 ⁄ 1 2 (38mm) KM 46 46-3 -333 33 1 ⁄
1 4 (159mm) SHEEHAN OSTEOTOME 6 ⁄
For our complete selection of osteotomes, chisels and gouges, refer to Section G in our Orthopedic Sourcebook ™ .
BONE RASPS AND FILES
45
1 / 1
1 / 1
1 / 1
1 / 1
1 / 1
KM 69-543 69-543 KM 69-54 69-544 4 KM 69-545 69-545
MALTZ RASP KM 58-060 1 4 (184mm) 7 ⁄ backward cutting
(178mm) m) doubl double e ended BONE FILES 7 (178m KM 69-543 69-543 #12 plain plain serra serrations tions KM 69-544 69-544 #12A plain plain and cross cross serration serrationss KM 69-545 69-545 #12CA cross serra serrations tions
MALTZ RASP IMPROVED MALTZ KM 58-062 1 4 (210mm) double ended 8 ⁄ forward and backward cutting
1 / 1
1 / 1
KM 58-072
KM 58-073
1 / 1
1 / 1
1 / 1
JOSEPH RASP KM 58-068 1 4 (159mm) fine 6 ⁄ cross serrations
LEWIS RASP backward cutting KM 58-072 KM 58-073 1 1 2 (191mm) 2 (191mm) 7 ⁄ 7 ⁄ fine teeth coarse teeth
COTTLE RASP KM 58-066 8 (203mm) backward cutting
®
BONE RASPS, FILES AND SAWS
46
1 / 1
1 / 1
KM 58-050
1 / 1
KM 58-052
AUFRICHT RASP 81 ⁄ 4 (210mm) KM 58-050 forward cutting KM 58-052 backward cutting
BONE FILE KM 46-650 1 2 (241mm) bayonet shank 9 ⁄ half round blade fine teeth
FOMON RASP KM 46-655 1 2 (216mm) double ended 8 ⁄ fine and coarse teeth 4-sided, convex and flat
1 / 1
1 / 1
1 / 1
KM 58 58-0 -097 97 KM 58 58-0 -096 96 KM 58 58-0 -098 98
PUTTI BONE RASP KM 46-654 11 (279mm) flat ends one end curved up one end curved sideways
PUTTI BONE RASP KM 46-652 12 (305mm) one round end and one half round end
®
JOSEPH BONE SAW 71 ⁄ 2 (191mm) KM 58-096 straight KM 58-097 bayonet left KM 58-098 bayonet right
DERMAL INSTRUMENTS
47
1 / 1 1 / 1
1 / 1
1 / 1
SCHAMBERG COMEDONE EXTRACTOR KM 29-580 KM 29-582 3 3 4 (95mm) 4 (95mm) 3 ⁄ 3 ⁄ standard extra fine crimped loops crimped loops
SCHAMBERG COMEDONE EXTRACTOR KM 29-584 3 4 (95mm) 3 ⁄ square loops
UNNA COMEDONE EXTRACTOR KM 29-592 53 ⁄ 4 (146mm) fenestrated spoon ends
1 / 1 1 / 1
KMEDIC COMEDONE EXTRACTOR KM 29-604 1 4 (159mm) one fenestrated cup 6 ⁄ and curved lancet with cap
GREG COMEDONE EXTRACTOR KM 29-606 5 (127mm) one fenestrated cup and lancet blade with cap
SAALFELD COMEDONE EXTRACTOR KM 29-566 41 ⁄ 2 (114mm) with lancet and one fenestrated cup
®
DERMAL INSTRUMENTS
48 1mm
2mm 1 / 1
KM 29-503
2mm
3mm
3mm 4mm 4mm
1 / 1
5mm
1 / 1
KM 29-505
KM 29-507
5mm 1 / 1
6mm
6mm
1 / 1
8mm
KEYES PUNCH 4 (102mm) KM 29-511 2mm KM 29-514 5mm KM 29-512 3mm KM 29-515 6mm KM 29-513 4mm KM 29-517 8mm
1 2 (140m (140mm) m) round FOX CURETTE 5 ⁄ KM 29-495 1mm KM 29-498 4mm KM 29-496 2mm KM 29-499 5mm KM 29-497 3mm KM 29-500 6mm
1 2 (14 (140mm 0mm)) ova ovall PIFFARD CURETTE 5 ⁄ KM 29-5 29-503 03 #1 smal smalll KM 29-5 29-505 05 #2 medi medium um KM 29-5 29-507 07 #3 larg large e
1 / 1
KM 69-320 4 (102mm)
BIRO DERMAL NAEVUS SCISSORS KM 35-515 4 (102mm) angled on flat sharp outside edges
®
NAIL SPLITTER
KM 69-322 1 2 (114mm) 4 ⁄
KM 69-326 5 (127mm) heavy jaw
KM 69-327 5 (127mm) narrow jaw
KM 69-340 6 (152mm)
Note: For a sure grip, our splitters have grooved handles.
DERMAL INSTRUMENTS
49
1 / 1
KM 69-292 1 2 (114mm), 4 ⁄ 11mm cutting edge
1 / 1
1 / 1
1 / 1
KM 69-294 5 (127mm), 14mm cutting edge
KM 69-430 1 2 (140mm) 5 ⁄ concave
KM 69-432 1 2 (140mm) 5 ⁄ straight
NAIL NIPPER heavy
TISSUE NIPPER
1 / 1
NAIL NIPPER KM 69-410 1 2 (1 4 ⁄ (114 14mm mm)) co conc ncav ave e chrome barrel spring
KM 69-412 1 2 (140mm) concave 5 ⁄ chrome barrel spring
INGROWN NAIL FORCEPS KM 69-348 5 (127mm) anvil pattern narrow blade
FINGER RING CUTTER KM 29-430 KM 29-434 61 ⁄ 2 (1 (165 65mm mm)) chr chrom ome e saw sa w bla blade de on only ly with saw blade
®
EYE INSTRUMENTS
50
KM 54-358
KM 54-360
KM 54-362
1 / 1
KM 54-364 BARRAQUER EYE SPECULUM 3 4 (44mm) 1 ⁄ KM 54-108 KM 54-110 small blades large blades 10mm wide 15mm wide
1 / 1
1 / 1
KM 54 54-3 -307 07 KM 54 54-3 -309 09
1 / 1
GRAEFE EYE SPECULUM KM 54-080 1 2 (89mm) 3 ⁄
DESMARRES 1 2 (140mm) 5 ⁄ KM 54 54-3 -358 58 #1 KM 54 54-3 -360 60 #2 KM 54 54-3 -362 62 #3 KM 54 54-3 -364 64 #4
LID RETRACTOR
11mm 11mm 13mm 13 mm 15mm 15 mm 17mm 17 mm
1 / 1
KM 54 54-3 -311 11 KM 54 54-3 -313 13
KM 54-330
KM 54-332
KM 54-334 KM 54-71 54-713 3 KM 54-7 54-715 15 KM 54-7 54-717 17 KM 54-7 54-719 19 KM 54-7 54-721 21 KM 54-7 54-723 23
MEYHOEFFER CURETTE 5 (127mm) KM 54 54-3 -307 07 #2 #2/0 /0 1. 1.0m 0mm m KM 54 54-309 #0 1.5mm KM 54 54-311 #1 1.7mm KM 54 54-313 #2 2.0mm
®
GRAEFE STRABISMUS HOOK 1 2 (140mm) 5 ⁄ KM 5454-330 330 sm smal alll KM 54-3 54-332 32 me medi dium um KM 5454-334 334 la larg rge e
size 0000 0000/00 /000 0 size 00/ 00/0 0 size 1/2 size 3/4 size 5/6 size 7/8
BOWMAN LACRIMAL PROBES 5 (127mm) sterling
EYE INSTRUMENTS
51
KM 53-058 KM 53-062
SCHIOTZ TONOMETER KM 53-056 53-056 str straig aight ht scale scale KM 53-058 53-058 straig straight ht scale with with Allen Allen Plunger Plunger KM 53-060 53-060 impro improved, ved, inclin inclined ed scale scale KM 53-062 impro improved, ved, inclined inclined scale with with Allen Plunger Plunger
DIX SPUD AND NEEDLE KM 54-272 in reversible screw handle
CASTROVIEJO CALIPER KM 53-040 31 ⁄ 4 (83mm) graduated 0-20mm
1 / 1
1 / 1
1 / 1
NEEDLE KM 54-280 5 (127mm) 2 x 5mm blade
DAVIS KM 54-282 3 4 (121mm) 4 ⁄ 0.8mm blade
ELLIS KM 54-284 1 2 (114mm) curved 4 ⁄ 1.2mm blade
FOREIGN BODY NEEDLES AND SPUDS
®
EYE INSTRUMENTS
52
1 / 1
3 8 (86mm) BISHOP HARMAN FORCEPS 3 ⁄ KM 53-426 53-426 extra delic delicate ate serrated serrated 0.7mm 0.7mm KM 53-428 53-428 delic delicate ate serrate serrated d 1.0mm KM 53-440 53-440 delic delicate ate 1x2 teeth 1.0mm
TROUTMAN-BARRAQUER FORCEPS KM 53-460 3 (76mm) 1x2 teeth 0.12mm with tying platform
DOUGLAS CILIA FORCEPS KM 53-560 1 2 (89mm) fine serrations 3 ⁄
1 / 1
1 / 1 1 / 1
LITTAUER CILIA FORCEPS KM 53-564 1 2 (89mm) fine serrations 3 ⁄
®
BERGH CILIA FORCEPS KM 53-568 1 2 (89mm) fine serrations 3 ⁄
BARRAQUER CILIA & SUTURE FORCEPS KM 53-580 1 2 (114mm) smooth platform 4 ⁄
EAR AND NOSE INSTRUMENTS
53
1 / 1
1 / 1
1
2
2
3
3
4 1 / 1
HARTMAN EAR SPECULA round chrome KM 5656-180 180 #1 4m 4mm m dia diame mete terr KM 5656-182 182 #2 5m 5mm m dia diame mete terr KM 5656-184 184 #3 6m 6mm m dia diame mete terr KM 5656-186 186 #4 7m 7mm m dia diame mete terr
KM 57-176
1 / 1
KM 57-178
1 / 1
4
1 / 1
1 / 1
1
GRUBER EAR SPECULA oval adult chrome KM 5656-16 168 8 #1 4 x 5m 5mm m KM 5656-17 170 0 #2 5 x 6m 6mm m KM 5656-17 172 2 #3 6 x 7m 7mm m KM 5656-17 174 4 #4 7 x 8m 8mm m
QUIRE MECHANICAL FINGER KM 55-210 4 (102mm)
1 / 1 1 / 1
KM 57-164
WILDE EAR FORCEPS KM 57-176 KM 57-178 1 2 (114m 4 ⁄ 4mm m) de delicate 5 (127mm) serrated serrated angular angular
LUCAE EAR FORCEPS KM 55-094 1 2 (140mm) 5 ⁄ serrated bayonet
JANSEN (GRUENWALD) EAR FORCEPS KM 55-100 KM 57-164 1 4 (159mm) 6 ⁄ 8 (203mm) serrated serrated bayonet bayonet
®
EAR AND NOSE INSTRUMENTS
54
1 / 1
1 / 1
KM 57-110 small
1 / 1
KM 57-112 medium
1 / 1
KM 57-114 large
3 4 (146mm) VIENNA SPECULUM 5 ⁄
VIENNA SPECULUM LIGHT KM 57-104 3 4 (146mm) 5 ⁄ adult
1 / 1
KM 57-098
HALLE-TIECK SPECULUM KM 57-098 KM 57-100 1 1 2 (140mm) 2 (140mm) 5 ⁄ 5 ⁄ infant adult
®
KILLIAN NASAL SPECULUM 6 (152mm) KM 57 57-0 -058 58 2 blade KM 57 57-0 -064 64 3 blade 1 2 blade KM 57 57-0 -070 70 3 ⁄
AUFRICHT NASAL RETRACTOR KM 57-120 1 2 (165mm) 6 ⁄ solid blade
EAR AND NOSE INSTRUMENTS
55
1 / 1
KM 55-160
1 / 1
KM 55-166
1 / 1
1 / 1
KM 55-174
1 / 1
KM 55-168
HARTMANN ALLIGATOR FORCEPS 1 2 KM 55 55-1 -160 60 3 ⁄ (89mm) serrated 1 2 (140mm) serrated KM 55 55-1 -162 62 5 ⁄ 1 2 (165mm) serrated KM 55 55-1 -164 64 6 ⁄ 1 2 KM 55 55-1 -174 74 3 ⁄ (89mm) 1x2 teeth serrated
HARTMANN EAR DRESSING FORCEPS KM 55-188 5 (127mm) delicate serrated
NOYES ALLIGATOR FORCEPS KM 55-166 KM 55-168 51 ⁄ 2 (140mm) 51 ⁄ 2 (140mm) serrated 1x2 teeth serrated
1 / 1
1 / 1
1 / 1
KM 55-192 KM 55-194 1 / 1
HARTMANN NASAL FORCEPS KM 57-182 8 (203mm) standard serrated
KNIGHT SEPTUM FORCEPS KM 55-198 7 (178mm) cup jaws
LUC SEPTUM FORCEPS 8 (203mm) KM 55-192 KM 55-194 small cup large cup
®
EAR AND NOSE INSTRUMENTS
56
1 / 1
KM 56-096 #1 small
1 / 1
KM 56-098 #2 medium 1 / 1
KM 57-130 #1
1 / 1
KM 57-132 #2
1 / 1
KM 56-100 #3 large 1 / 1
KM 57-134 #3
1 / 1
KM 57-136 #4
1 / 1
KM 57-138 #5
1 2 (165mm) BILLEAU LOOP 6 ⁄
GROSS SPOON AND HOOK KM 56-104 3 4 (121mm) 4 ⁄
1 / 1
KM 57-140 #6
COAKLEY ANTRUM CURETTES 3 4 (171mm) 6 ⁄
1 / 1
00
0
1
2
3
straight blunt KM 56 56-0 -059 59 #0 #00 0 KM 56 56-0 -061 61 #0 KM 56 56-0 -063 63 #1 KM 56 56-0 -065 65 #2 KM 56 56-0 -067 67 #3 angled blunt KM 56 56-0 -074 74 #0 #00 0 KM 56 56-0 -076 76 #0 KM 56 56-0 -078 78 #1 KM 56 56-0 -080 80 #2 KM 56 56-0 -082 82 #3 straight sharp KM 56 56-0 -085 85 #0 #00 0 KM 56 56-0 -086 86 #0 KM 56 56-0 -087 87 #1 KM 56 56-0 -088 88 #2 KM 56 56-0 -089 89 #3
1 2 (165mm) BUCK CURETTE 6 ⁄
®
angled sharp KM 56 56-0 -091 91 #0 #00 0 KM 56 56-0 -092 92 #0 KM 56 56-0 -093 93 #1 KM 56 56-0 -094 94 #2 KM 56 56-0 -095 95 #3
TUNING FORK aluminum alloy KM 5656-28 284 4 CC-128 128 KM 5656-31 312 2 CC-256 256 KM 5656-31 318 8 CC-512 512 KM 56-3 56-330 30 CC-102 1024 4 KM 56-3 56-334 34 CC-204 2048 8 KM 56-342 56-342 set of five in a case
MALLETS
57
Autoclavable to 250˚F (121˚C).
MALLET #49 KM 46-656 73 ⁄ 4 (195mm) lead filled and faced weight: 7 oz. (200 grams) head weight: 5 oz. (150 grams) head diameter: 22mm
MEAD MALLET KM 46-657 1 2 (191mm) with replaceable nylon caps 7 ⁄ weight: 11 oz. (315 grams) head weight: 6 oz. (170 grams) head diameter: 20mm
GERZOG BONE MALLET KM 46-661 1 2 (191mm) lead filled and faced 7 ⁄ weight: 10 oz. (285 grams) head weight: 7 oz. (200 grams) head diameter: 25mm
Autoclavable to 250˚F (121˚C).
LUCAE BONE MALLET KM 46-660 8 (20 (203mm 3mm)) brass head stainless steel handle weight: 9 oz. (260 grams) head weight: 5 oz. (150 grams) head diameter: 25mm
MALLET lightweight KM 46-662 71 ⁄ 2 (1 (191m 91mm) m) with two replaceable nylon caps anodized aluminum handle weight: 7 oz. (200 grams) head weight: 4 oz. (120 grams) head diameter: 25mm
For our complete selection of mallets, refer to Section H in our Orthopedic Sourcebook ™ .
HEATH MALLET heavyweight KM 46-663 1 2 (191mm) solid stainless steel 7 ⁄ weight: 2 lbs. (900 grams) head weight: 1 lb. 4 oz. (570 grams) head diameter: 40mm
®
BONE CUTTING INSTRUMENTS
58
1 / 1
KM 47-398
1 / 1
1 / 1
KM 47-540
KM 47-555
LISTON BONE straight 1 2 KM 47 47-3 -398 98 5 ⁄ 3 4 KM 47 47-4 -400 00 6 ⁄ 1 2 KM 47 47-4 -402 02 7 ⁄
FORCEPS angled on flat 1 2 (140mm) KM 47 47-4 -410 10 5 ⁄ 3 4 (171mm) KM 47 47-4 -404 04 6 ⁄ 1 2 (191mm) KM 47 47-4 -412 12 7 ⁄
RUSKIN-LISTON FORCEPS 6 (152mm) KM 4747-550 550 str straig aight ht KM 47-555 strai straight ght deli delicate cate KM 47-557 curved delic delicate ate
1 2 (191mm) RUSKIN-LISTON FORCEPS 7 ⁄ KM 47-5 47-538 38 str straig aight ht KM 47-540 straig straight ht delic delicate ate KM 47-54 47-542 2 ang angled led on on flat flat
1 / 1
KM 47-527 1 / 1
1 / 1
KM 47-523 KM 47-532 1 / 1
1 / 1
KM 47 47-5 -520 20 KM 47 47-5 -522 22
1 / 1 1 / 1
KM 47-531
KM 47-534
RUSKIN RONGEUR 6 (152mm) straight KM 47-523 47-523 2x14mm bite delic delicate ate KM 47-5 47-532 32 3x15 3x15mm mm bite bite curved KM 47-5 47-534 34 3x15 3x15mm mm bite bite
®
1 RUSKIN RONGEUR 7 ⁄ 4 (184mm) straight KM 47-52 47-526 6 4x16 4x16mm mm bite bite KM 47-52 47-528 8 6x16 6x16mm mm bite bite curved KM 47-52 47-527 7 4x16 4x16mm mm bite bite KM 47-53 47-531 1 6x16 6x16mm mm bite bite
BEYER RONGEUR 7 (178mm) curved KM 47-5 47-520 20 3x14 3x14mm mm bite bite KM 47-5 47-522 22 4x15 4x15mm mm bite bite
ORTHOPEDIC INSTRUMENTS
59
1 / 1
KM 47-062
KERN BONE FORCEPS KM 47-062 KM 47-064 3 1 4 (146mm) 2 (216mm) 5 ⁄ 8 ⁄ with ratchet with ratchet
BUNNELL DRILL KM 48-392 3 4 (146mm) cannulated 5 ⁄ 3-jaw chuck accepts 5 32) 32 wire up to 4.0mm ( ⁄ with key
1 / 1
1 / 1
NEEDLE NOSE PLIERS KM 48-245 1 2 (140mm) 5 / for wire manipulation
FLAT NOSE PLIERS KM 48-246 1 2 (140mm) 5 / for wire manipulation
RALKS DRILL KM 48-390 6 (152mm) cannulated offset handle, 3-jaw chuck 1 4) accepts wire up to 6.35mm ( ⁄ with key
®
ORTHOPEDIC INSTRUMENTS AND K-WIRE
60
Now you can drive, bend and pull K-Wire for a fraction of the cost of power equipment.
Vickers Easidriver™
VICKERS EASIDRIVER™ 1 2 (140mm) KM 46-540, 5 ⁄ German Stainless
NO MANUAL DEVICE HAS EVER ACHIEVED THIS FUNCTION For years, surgeons have sought a simple pin driver that could actually be fully controlled with one hand. The Vickers Easidriver™ leaves the other hand free to manipulate tissue, leaving the patient in better hands.
IDEAL BACK UP UNIT FOR OFFICE AND HOSPITAL What do you use when your power equipment fails during surgery? Now you have the handy Vickers Easidriver™. Without loss of precious time, it is ready for use. In cases where power equipment is not indicated or available, the Vickers can become your primary driver, allowing for feel and control that power units don’t offer.
Single handed operation Chuckless Depthscale Wire bending facility No maintenance No Set-Up Autoclavable For wire from .028 to .062 (.7mm to 1.6mm)
Dr. Vickers, who developed the instrument, is a specialist in hand surgery and the Chairman of the Instrumentation and Equipment Committee of the International Federation of Societies for Surgery of the Hand.
Precision manufactured in Germany from certified implant stainless steel. Longer, gently tapered points for easier penetration. Smoothly hand polished, causing less trauma when removed. Sold six (6) to the package.
KIRSCHNER WIRES DIAMETER AND PRODUCT NUMBER LENGTH
.028 (. (.7m 7mm) m) .0 .035 35 (. (.9m 9mm) m) .0 .045 45 (1.1m .1mm) m) .054 (1.4mm) .062 (1.6mm)
DOUBLE END TROCAR
4 (1 02 02 mm mm)
KM 71-100
KM 71-101
KM 71-102
KM 71-104
9 (229mm)
KM 71-110
KM 71-111
KM 71-112
KM 71-114
KM 71-103 KM 71-113
12 (3 05 05 mm mm)
KM 71-120
KM 71-121
KM 71-122
KM 71-124
KM 71-123
SINGLE TROCAR round end
71-150 9 (229mm) KM 71 12 (305mm)
KM 71 71-160
KM 71 71-151
KM 71 71-152
KM 71 71-154
KM 71 71-153
KM 71 71-161
KM 71 71-162
KM 71 71-164
KM 71 71-163
KM 71-211
KM 71-212
KM 71-214
KM 71-213
KM 71 71-242
KM 71 71-244
KM 71 71-243
DOUBLE END DIAMOND
9 (2 29 29 mm mm)
KM 71-210
SINGLE DIAMOND round end
9 (229mm)
KM 71 71-240
KM 71 71-241
1 / 1
STEINMANN PINS DIAMETER AND PRODUCT NUMBER
Trocar Point
Diamond Point
LENGTH
5 3 64 (2.0mm) /32 /
7 1 9 5 64 (2.8mm) 8 (3.2mm) 64 (3.5mm) 32 (4.0mm) .1 (2.4mm) / / / / 77 (4.5mm)
DOUBLE END TROCAR
71-4 -450 50 9 (229mm) KM 71
KM 71 71-4 -453 53
KM 71 71-4 -456 56
KM 71 71-4 -459 59
KM 71 71-4 -462 62
KM 71 71-4 -465 65
KM 71 71-4 -468 68
KM 71 71-4 -486 86
KM 71 71-4 -489 89
KM 71 71-4 -492 92
KM 71 71-4 -495 95
KM 71 71-4 -498 98
KM 71 71-5 -513 13
KM 71 71-5 -516 16
KM 71 71-5 -519 19
KM 71 71-5 -522 22
KM 71 71-5 -525 25
KM 71 71-5 -528 28
KM 71 71-6 -603 03
KM 71 71-6 -606 06
KM 71 71-6 -609 09
KM 71 71-6 -612 12
KM 71 71-6 -615 15
KM 71 71-6 -618 18
KM 71 71-6 -636 36
KM 71 71-6 -639 39
KM 71 71-6 -642 42
KM 71 71-6 -645 45
KM 71 71-6 -648 48
KM 71 71-6 -666 66
KM 71 71-6 -669 69
KM 71 71-6 -672 72
KM 71 71-6 -675 75
KM 71 71-6 -678 78
SINGLE TROCAR 3 shank end
9 (229mm) KM 71 71-4 -480 80
KM 71 71-4 -483 83
SINGLE TROCAR round end
9 (229mm) KM 71 71-5 -510 10 DOUBLE END DIAMOND
9 (229mm) KM 71 71-6 -600 00
SINGLE DIAMOND 3 shank end
9 (229mm) KM 71 71-6 -630 30
Round End
3 Shank End
KM 71 71-6 -633 33
SINGLE DIAMOND round end
9 (229mm) KM 71 71-6 -660 60
KM 71 71-6 -663 63
For more wires and pins, refer to Section P in our Orthopedic Sourcebook ™ .
®
WIRE CUTTER KM 46-625 7 (178mm) front and side cutting with carbide inserts, double action maximum capacity .062 (1.6mm)
WIRE AND PIN CUTTERS Note: To achieve the best results when cutting wire, follow these simple steps. • Choose the appropriate cutter for the wire diameter you want to cut. • Do not exceed the maximum capacity marked on each cutter. • Cut the wire in the middle of the jaw–not on the edge or in the corner. • When cutting, do not twist or turn the cutter. • Protect from flying particles. The harder the metal, the farther the pieces can fly.
61
The cutting specifications given are for K-Wire and Steinmann Pins.
1 / 1
1 / 1
1 / 1
5 2 , 4 5 8 , 0 6 # t n et a P . . S U
PEDIATRIC WIRE CUTTER KM 46-622 3 4 (121mm) carbide inserts 4 / cuts up to .028 (0.7mm) ″
″
SIDE BITE WIRE CUTTER KM 46-621 7 (178mm) welded carbide jaws cuts up to .062 (1.6mm) ″
″
1 / 1
1 / 1
1 / 1
PIN CUTTER (LARGE) KM 46-626 22 (559mm) side cutting 1 4 (6.3mm) cuts up to / ″
″
CANNULATED PIN CUTTER KM 46-647 1 2 (191mm) 7 / cuts up to .062 (1.6mm) ″
″
Cannulation allows you to slide the cutter over the inserted wire. The piece cut off will be held inside the channel.
DOUBLE ACTION WIRE CUTTER KM 46-624 1 2 (216mm) angled 8 / carbide inserts 3 32 (2.4mm) 32 cuts up to / ″
For our complete selection of wire and pin cutters, refer to Section Q in our Orthopedic Sourcebook ™ .
″
Note: This heavy duty cutter, engineered for us in Germany,, gives you leverage like no other cutter Germany on the market. The replaceable jaws are made of the highest grade tool steel and are able to cut 1 4 (6.3mm). 4 Steinmann Pins up to / ″ ″
Not for use inside patient. U.S. Patent #6,085,425
®
PLASTER CAST INSTRUMENTS
62
1 / 1
ESMARCH SHEARS KM 46-060 8 (203mm)
BRUNS SHEARS KM 46-090 1 4 (235mm) 9 ⁄ one serrated blade
PEDIATRIC CAST BRE AKER PEDIATRIC KM 46-188 7 (178mm)
1 / 1
1 / 1 1 / 1
KM 46-186
To relieve cast pressure or for cast removal. One handed operation.
PLASTER EDGER WOLFF KM 46-186 KM 46-184 1 2 (241mm) 7 (178mm) sm s mall 9 ⁄
®
KMEDIC CAST SPREA SPREADER DER KM 46-134 9 (229mm) serrated 3 prongs
HENNIG PLASTER SPREADER KM 46-138 11 (279mm)
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
63
PEDERSON SPECULUM KM 6464-27 278 8 sm smal alll KM 64-2 64-280 80 med medium ium KM 6464-28 282 2 la larg rge e
GRAVES SPECULUM KM 6464-25 256 6 sm smal alll KM 64-2 64-262 62 med medium ium KM 6464-26 266 6 la larg rge e
SLENDER PEDERSON SPECULUM KM 64-288 narrow blades
GRAVES OPEN SIDE SPECULUM KM 64-290 medium size wide angle blades
®
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
64
AUVARD VAGINAL SPECULA 9 (229mm) 1 1 2 x 3 ⁄ 4, 2 lbs. KM 64 64-3 -328 28 1 ⁄ (38mm x 83mm, 900 grams) 1 1 1 2 x 3 ⁄ 4, 2 ⁄ 2 lbs. KM 64 64-3 -329 29 1 ⁄ (38mm x 83mm, 1,134 grams) 1 1 2 x 3 ⁄ 4, 3 lbs. KM 64 64-3 -330 30 1 ⁄ (38mm x 83mm, 1,361 grams) 3 1 8 x 4, acute angle, 2 ⁄ 2 lbs. KM 64 64-3 -332 32 1 ⁄ (35mm x 102mm, 1,134 grams)
1
1
2
2
3
3
EASTMAN VAGINAL RETRACTOR 7 (178mm) KM 6464-410 410 #1 sma small ll KM 6464-412 412 #2 medi medium um KM 6464-414 414 #3 lar large ge
KM 6464-566 566 KM 64-5 64-568 68 KM 64-5 64-574 74 KM 64-5 64-580 80 KM 64-5 64-584 84 KM 64-5 64-592 92 KM 64-562 64-562
1 2
size 9 & 10 size size siz e 11 & 12 size siz e 13 & 14 size siz e 15 & 16 size siz e 17 & 18 size siz e 19 & 20 set of of six in a case
3
SIMS VAGINAL RETRACTOR double ended KM 6464-420 420 #1 sma small ll KM 6464-422 422 #2 medi medium um KM 6464-424 424 #3 lar large ge
®
HANK UTERINE DILA DILATORS TORS 11 (279mm) double ended
JACKSON VAGINAL RETRACTOR 7 (178mm) KM 64-4 64-402 02 #1 smal smalll KM 64-4 64-404 04 #2 medi medium um KM 64-4 64-406 06 #3 larg large e
KM 64-61 64-616 6 KM 64-61 64-618 8 KM 64-62 64-624 4 KM 64-63 64-630 0 KM 64-63 64-634 4 KM 64-64 64-642 2 KM 64-64 64-648 8 KM 64-65 64-650 0 KM 64-604 64-604
size 3mm & 4mm size size siz e 5mm & 6mm size siz e 7mm & 8mm size siz e 9mm & 10mm 10mm size siz e 11mm 11mm & 12mm 12mm size siz e 13mm 13mm & 14mm 14mm size siz e 15mm 15mm & 16mm 16mm size siz e 17mm 17mm & 18mm 18mm set of of eight eight in a case case
HEGAR UTERINE DILA DILATORS TORS 8 (203mm) double ended
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
65
KM 64-662 size 13 & 15 french french KM 64-666 size 17 & 19 french french KM 64-670 size 21 & 23 french french KM 64-674 size 25 & 27 french french KM 64-678 size 29 & 31 french french KM 64-702 size 33 & 35 french french KM 64-706 size 37 & 39 french french KM 64-710 size 41 & 43 french french KM 64-658 64-658 set of eigh eightt in a case 1 french = .33mm
PRATT UTERINE DILATORS 1 2 (292mm) 11 ⁄ double ended
1 / 1
1 / 1
SIMS UTERINE SOUND KM 65-474 13 (330mm) cm scale malleable silver plated
SIMPSON UTERINE SOUND 13 (330mm) malleable silver plated KM 65-4 65-468 68 inc inch h scale scale KM 65-4 65-470 70 cm sca scale le
1 / 1
KM 65-490 KM 65-492 KM 65-494
1 / 1
1 / 1
KM 65-496 KM 65-498
1 / 1
KM 66-058 EMMETT UTERINE TENACULUM HOOK 9 (229mm) KM 65-490 65-490 #1 narrow narrow curve curved d KM 65-49 65-492 2 #2 acute acute angl angle e KM 65-49 65-494 4 #3 right right angl angle e KM 65-49 65-496 6 #4 wide wide curve curved d KM 65-49 65-498 8 #5 doubl double e angle angle
SCHROEDER TENACULUM FORCEPS KM 66-268 KM 66-274 1 1 2 (241mm) 2 (241mm) 9 ⁄ 9 ⁄ S-shape
BOZEMANN UTERINE DRESSING FORCEPS KM 66-056 KM 66-058 1 1 4 (260mm) 4 (260mm) 10 ⁄ 10 ⁄ straight curved
®
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
66
1 / 1
KM 65-186
1 / 1
KM 65-188
TISCHLER BIOPSY PUNCH KM 65-186 9 (229mm) 3 x 7mm bite BABY TISCHLER BIOPSY PUNCH KM 65-188 8 (203mm) delicate 3 x 5mm bite
Note: Length given refers to working length.
1 / 1
EPPENDORFER BIOPSY PUNCH KM 65-162 9 (229mm) 4 x 8mm bite
1 / 1
KM 65-178
1 / 1
KM 65-180
WITTNER BIOPSY PUNCH KM 65-178 KM 65-180 9 (229mm) 9 (229mm) straight angular 3 x 8mm bite 3 x 8mm bite
1 / 1
KEVORKIAN-YOUNGE BIOPSY PUNCH KM 65-184 10 (254mm) straight 3 x 10mm bite
®
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
67
1 / 1
1 / 1 1 / 1
KM 64-796
KM 64-802
KEVORKIAN-YOUNGE ENDOCERVICAL BIOPSY CURETTE 12 (305mm) KM 64-796 without basket 3 x 12mm sharp tip
KM 65-118 SCHUBERT BIOPSY PUNCH KM 65-115 KM 65-118 1 2 (216mm) 8 ⁄ 101 ⁄ 2 (267mm) straight angular 4 x 8mm bite 4 x 8mm bite
1 / 1
THOMS-GAYLOR BIOPSY PUNCH THOMS-GAYLOR KM 65-084 1 2 (241mm) interfitted jaw 9 ⁄ 5mm cup
KM 64-802 with basket 3 x 12mm sharp tip
1 / 1 1 / 1
1 / 1
KM 64-788
HEANEY UTERINE BIOPSY CURETTE KM 64-764 9 (229mm) serrated
NOVAK SUCTION NOVAK KM 64-786 1 2 (241mm) 9 ⁄ 2mm diameter
BIOPSY CURETTE KM 64-788 1 2 (241mm) 9 ⁄ 4mm diameter
RANDALL SUCTION BIOPSY CURETTE KM 64-808 3 4 (248mm) 9 ⁄ 4mm diameter
®
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
68
1 / 1
00
0
1
2
3
1 / 1
4
5
KM 65 65-3 -347 47 KM 65 65-3 -349 49 KM 65 65-3 -351 51 KM 65 65-3 -353 53 KM 65 65-3 -355 55 KM 65 65-3 -357 57 KM 65 65-3 -359 59 KM 65 65-3 -361 61
#00 #00 #0 #1 #2 #3 #4 #5 #6
6
SIMS UTERINE CURETTE 11 (279m (279mm) m) mall malleable eable sharp
KOGAN ENDOCERVICAL SPECULUM KM 64-830 1 2 (241mm) with gauge and 9 ⁄ set screw 7 x 25mm jaws
BRAUN EPISIOTOMY SCISSORS KM 34-502 KM 34-504 1 1 2 (140mm) 2 (216mm) 5 ⁄ 8 ⁄ angled si sideways angled si sideways
BUSCH UMBILICAL SCISSORS KM 67-294 1 2 (165mm) 6 ⁄ curved sideways
®
UMBILICAL SCISSORS KM 67-292 1 4 (108mm) 4 ⁄
GYNECOLOGICAL AND OBSTETRICAL INSTRUMENTS
69
DE LEE OBSTETRICAL FORCEPS fenestrated blades KM 67-498 KM 67-500 12 (305mm) 14 (356mm) short model long model
SIMPSON OBSTETRICAL FORCEPS fenestrated blades KM 67-502 KM 67-504 12 (305mm) 14 (356mm) short model long model
ELLIOT OBSTETRICAL FORCEPS fenestrated blades KM 67-509 KM 67-511 1 2 (317mm) 12 ⁄ 15 (381mm) short model long model
MCLEAN OBSTETRICAL FORCEPS KM 67-516 14 (356mm) solid blades, short shanks
SIMPSON-LUIKART OBSTETRICAL FORCEPS KM 67-526 14 (356mm) solid blades
KIELLAND-LUIKART OBSTETRICAL FORCEPS KM 67-520 1 2 (394mm) solid blades 15 ⁄
®
RECTAL RECT AL INSTRUMENTS
70
BODENHAMMER RECTAL SPECULUM KM 63-300 6 (152mm) long with set screw 1 3 2 x ⁄ 4 (89mm x 19mm) 3 ⁄ solid blades
SIMS RECTAL SPECULUM KM 63-304 6 (152mm) long with set screw 1 5 2 x ⁄ 8 (89mm x 16mm) 3 ⁄ fenestrated blades
PRATT RECTAL SPECULUM KM 63-312 1 2 (216mm) long with set screw 8 ⁄ 1 2 x 1 (89mm x 25mm) 3 ⁄ solid blades
FANSLER-IVES RECTAL SPECULUM KM 63-318 KM 63-319 chrome wi with ob obturator obturator on only 1 1 3 ⁄ 4 long x 1 ⁄ 8 (82mm x 29mm) outside diameter
HIRSCHMAN RECTAL ANOSCOPE KM 6363-330 330 sma small, ll, 21 ⁄ 4 (57mm) long x 9 16 (14mm) inside diameter 16 ⁄ 5 8 (67mm) long x KM 63-33 63-332 2 med medium ium,, 2 ⁄ 11 16 (18mm) inside diameter ⁄ 16 1 2 (89mm) long x KM 6363-334 334 lar large, ge, 3 ⁄ 7 ⁄ 8 (22mm) inside diameter
BRINKERHOFF RECTAL SPECULUM 1 2 (89mm) long x KM 63-3 63-350 50 sma small, ll, 3 ⁄ 1 2 (13mm) 1 (25mm) tapers to ⁄ KM 63-3 63-352 52 med medium ium,, 4 (102mm) long x 5 8 (16mm) 1 (25mm) tapers to ⁄ 3 4 (121mm) long x KM 63-3 63-354 54 lar large, ge, 4 ⁄ 1 3 4 (32mm) tapers to ⁄ 4 (19mm) 1 ⁄
®
RECTAL RECT AL AND UROLOGICAL INSTRUMENTS
71
MCGIVNEY HEMORRHOIDAL LIGA LIGATOR TOR KM 63-479 7 (178mm) working length loading cone included
MCGIVNEY FORCEPS KM 63-503 1 2 (191 7 ⁄ (191mm) mm) angle angled d shanks
1 / 1
KM 6464-00 008 8 8 fr fren ench ch KM 64-0 64-010 10 10 fren french ch KM 64-0 64-012 12 12 fren french ch KM 64-0 64-014 14 14 fren french ch KM 64-0 64-016 16 16 fren french ch KM 64-0 64-018 18 18 fren french ch KM 64-0 64-020 20 20 fren french ch KM 64-0 64-022 22 22 fren french ch KM 64-0 64-024 24 24 fren french ch KM 64-0 64-026 26 26 fren french ch KM 64-0 64-028 28 28 fren french ch KM 64-0 64-030 30 30 fren french ch KM 64-0 64-032 32 32 fren french ch KM 64-0 64-034 34 34 fren french ch 1 french = .33mm
COTTON CARRIER KM 63-382 15 (381 (381mm) mm) shaft 2x3 teeth, spring handle
DITTEL URETHRAL SOUNDS
KM 6464-10 108 8 KM 6464-110 110 KM 6464-112 112 KM 6464-114 114 KM 6464-116 116 KM 6464-118 118 KM 6464-120 120 KM 6464-124 124 KM 6464-126 126 KM 6464-128 128 KM 6464-130 130 KM 6464-132 132 KM 6464-134 134 KM 6464-136 136 KM 64-106 64-106
8 fre frenc nch h 10 fren french ch 12 fren french ch 14 fren french ch 16 fren french ch 18 fren french ch 20 fren french ch 22 fren french ch 24 fren french ch 26 fren french ch 28 fren french ch 30 fren french ch 32 fren french ch 34 fren french ch set of of 12 in in a case case (sizes 8-30) 1 french = .33mm
VAN BUREN URETHRAL SOUNDS 11 (279 (279mm) mm) curved
®
MISCELLANEOUS
72
BUNT FORCEPS HOLDER KM 39-670
KMEDIC FORCEPS HOLDER KM 39-672 KM 39-674 6 (152mm) 12 (305mm)
INSTRUMENT CLEANING BRUSH 7 (178mm) KM 39-682 KM 39-684 wire nylon set of three set of three
Sterilize, identify, identify, move and store all your instruments together in these stainless steel containers. Steam and gas sterilization. Removable lid can double up as a tray. Engravable tags for easy identification. Check the size of your autoclave chamber before ordering. Recommend to replace the cloth inserts every six months.
STERILIZING CONTAINER KM 4646-54 544 4 sm smal alll 9 x 5 x 2 (229mm x 127mm x 51mm) ″
″ ″ ″ ″
®
″
″
″
KM 4646-54 545 5 me medi dium um 11 x 9 x 2 (279mm x 229mm x 51mm)
COVER TOWEL cotton KM 46-5 46-544 44P P sm smal alll KM 46-5 46-545P 45P med medium ium
KM 4646-54 547 7 la larg rge e 20 x 8 x 2 (508mm x 203mm x 51mm) (not pictured)
SILICONE MAT KM 98-125 fits tray KM 46-544
″
RULER inch and mm graduated KM 39-692 6 (152 (152mm) mm) flexi flexible ble KM 39-694 8 (203 (203mm) mm) flexi flexible ble KM 39 39-6 -698 98 12 (305 (305mm) mm) flexi flexible ble KM 39 39-7 -700 00 20 (508 (508mm) mm) flexi flexible ble
″
REPLACEMENT CLOTH INSERTS KM 46 46-5 -546 46 28 x 28 (711mm x 711mm)
″
″
″
″
″
SMARTRACKS®
73 Lightweight racks for sterilization and storage
Nylon coated brackets help avoid metal to metal contact.
Plastic plate on underside of top bracket helps protect sharp tips from being damaged.
Side arm stays locked to help prevent instruments from falling out, even when turned upside down.
Deep brackets hold instruments in place.
Custom designed base keeps instruments upright during loading and unloading.
Reinforced, sturdier frames are made from corrosion-resistant corrosionresistant anodized aluminum.
Fully autoclavable to 270˚F.
Quick reference chart easily identifies the type and size instrument rack holds.
Patented design manufactured only by KMedic.
See page 76 for detailed descriptions of KMedic instruments held in each SmartRack ® .
BRUN SMARTRACK® KM 9898-160 160 3 1 3 4 x 8 ⁄ 2 x 2 ⁄ 4 9 ⁄ (248mm x 216mm x 70mm) Holds twelve 7 (178 (178mm) mm) KMed KMedic ic Brun Curettes
HOKE SMARTRACK® KM 98-150 1 1 4 x 5 x 2 ⁄ 4 8 ⁄ (210mm x 127mm x 57mm) 1 4 (133 Holds eight 5 ⁄ (133mm) mm) KMed KMedic ic Hoke Chisels or Osteotomes
COBB SMARTRACK® KM 98-170 3 1 4 x 14 2 x 3 13 ⁄ 14 ⁄ (349mm x 368mm x 76mm) Holds nine 11 (279 (279mm) mm) KMed KMedic ic Cobb Curettes, Elevators or Gouges
U.S. Patent 5,843,388 ®
SMARTRACKS®
74
HIBBS AND BRUN SMARTRACK ® KM 98-180 12 x 9 x 31 ⁄ 4 (305mm x 229mm x 83mm) Holds twelve 9 (229mm) KMedic Brun Curettes, Curettes, Hibbs Chisels, Gouges or Osteotomes
LAMBOTTE SMARTRACK® KM 98-190 3 1 1 4 x 6 ⁄ 4 x 3 ⁄ 2 11 ⁄ (298mm x 159mm x 89mm) Holds twelve 9 (229 (229mm) mm) KMed KMedic ic Lambotte Osteotomes
SMITH PETERSON SMARTRACK® KM 98-195 11 x 10 10 x 4 (279mm x 254mm x 102mm) Holds fourteen 8 (203mm (203mm)) KMedic Smith Peterson Osteotomes or Gouges
U.S. Patent 5,843,388 ®
SMARTRACKS®
75
SmartRacks® Exclusive KMedic design protects sharp edges better.
SmartRacks® are built to last! Outside frame is made from corrosion-resistant anodized aluminum and double riveted. Fully autoclavable to 270˚F.
Side gates stay open during loading and unloading. Notches in the top of each panel keep side gates up and out of the way.
Delicate tips are protected. A plastic plate attached to the top bracket prevents metal to metal contact–even when the racks are turned upside down.
Cross brackets hold instruments better. Positioning slots are deeper and hold instruments securely.
User-friendly side gates stay locked. Nylon coated gates are secured in place with side latches–reduces accidental opening.
No metal to metal contact. Instrument slots are covered with nylon to help prevent scratching and maintain instrument quality.
Easy to load and unload. Our unique “A” frame base forces instruments to lean into the rack–not out. Racks can go from the autoclave to the O.R. where instruments can be removed one at a time.
SmartRacks® save time. Product number and content charts are printed on top of racks. This makes instrument-to-rack identification quick and easy.
U.S. Patent 5,843,388 ®
SMARTRACKS®
76 DESCRIPTION
INSTRUMENTS HELD IN EACH RACK
HOKE SMARTRACK® KM 98-150 1 4 x 5 8 / x 21 / 4 (210mm x 127mm x 57mm)
Eight 51 / 4 (1 (133 33mm mm)) KMedic Hoke Chisels or Osteotomes Hoke Chisels – KM 46-505 thru KM 46-509 Hoke Osteot Osteotomes omes – KM 46-497 46-497 thru KM 46-504 46-504 KM 46-700 thru KM 46-709
BRUN SMARTRACK® KM 98-160 3 1 3 4 x 8 / 2 4 9 / x 2 / (248mm x 216mm x 70mm)
Twelve 7 (178 (178mm mm)) KMedic Brun Curettes KM 46-511 thru KM 46-531
COBB SMARTRACK® KM 98-170 3 1 4 2 x 3 13 / x 14 / (349mm x 368mm x 76mm)
Nine 11 (2 (279 79mm) mm) KMedic Cobb Curettes, Elevators or Gouges Curettes – KM 46-422 thru KM 46-441 Elevators – KM 46-413 thru KM 46-420 Gouges – KM 49-030 thru KM 49-036
HIBBS AND BRUN SMARTRACK ® KM 98-180 1 4 12 x 9 x 3 / (305mm x 229mm x 83mm)
Twelve 9 (22 (229mm 9mm)) KMedic Brun Curettes, Hibbs Chisels, Gouges or Osteotomes Brun Curettes – KM 46-551 thru KM 46-559, KM 46-563 thru KM 46-571, KM 49-110 thru KM 49-118, and KM 49-150 thru KM 49-158 Hibb Hi bbss Chi Chise sels ls – KM 49 49-0 -059 59 th thru ru KM 49 49-0 -082 82 Hibb Hi bbss Gou Gouge gess – KM 46 46-3 -387 87 th thru ru KM 46 46-4 -412 12 Hibbs Osteotomes Osteotomes – KM 46-359 thru KM KM 46-384
LAMBOTTE SMARTRACK® KM 98-190 3 1 1 4 x 6 / 4 2 11 / x 3 / (298mm x 159mm x 89mm)
Twelve 9 (2 (229 29mm mm)) KMedic Lambotte Osteotomes KM 46-304 thru KM 46-322 KM 46-328 thru KM 46-333
SMITH PETERSON SMARTRACK® KM 98-195 1 1 4 2 11 x 10 x 4113 / 4 x 6 / x 3 / (279mm x 254mm x 102mm)
Fourteen 8 (2 (203 03mm) mm) KMedic Smith Peterson Osteotomes or Gouges Smith Peterson Osteotomes – KM 46-448 thru KM 46-463 Smit Sm ith h Pet Peter erso son n Gou Gouge gess – KM 46 46-4 -466 66 th thru ru KM 46 46-4 -495 95
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
″
NOTES
®
″
″
″
ALPHABETICAL INDEX DESCRIPTION
PAGE
A ADSON BAYONET FORCEPS ADSON BROWN FORCEPS ADSON DRESSING FORCEPS ADSON HEMOSTATIC FORCEPS ADSON PERIOSTEAL ELEVATORS ADSON RETRACTOR ADSON TISSUE FORCEPS ALLIGATOR FORCEPS ALLIS TISSUE FORCEPS ALLIS-JUDD TISSUE FORCEPS ALM RETRACTORS ARMY PATTERN OSTEOTOME ARMY RETRACTOR ATRAUMATIC FORCEPS AUFRICHT NASAL RETRACTOR AUFRICHT RASP AUVARD VAGINAL SPECULA
DESCRIPTION
PAGE
C 23 22 21,22 17 42 40 21 55 18 18 38 44 37 23 54 46 64
B BABCOCK FORCEPS 18 BABY METZENBAUM SCISSORS 4 BABY TISCHLER BIOPSY PUNCH 66 BACKHAUS TOWEL FORCEPS 20 BACKHAUS-ROEDER TO TOWEL CL CLAMP 20 BALFOUR RETRACTORS 41 BANDAGE SCISSORS 5,12 BARON SUCTION TUBES 13 BARRAQUER BARRAQU ER CILIA AND SUTURE SUTURE FORCEPS FORCEPS 52 BARRAQUER EYE SPECULUM 50 BECKMAN RETRACTOR 40 BECKMAN-EATON RE RETRACTOR 39 BECKMAN-WEITLANER RETRACTOR 38 BERGH CILIA FORCEPS 52 BEYER RONGEUR 58 BILLEAU EAR LOOP 56 BIOPSY CURETTES 67 BIOPSY PUNCHES 66,67 BIRO DERMAN NAEVUS SCISSORS 48 BISHOP HARMAN FORCEPS 52 BLAIR (ROLLET) RETRACTORS 31 BLEPHAROPLASTY SCISSORS 6 BODENH NHA AMM MMER ER RECT CTA AL SPECUL ULU UM 70 BOLT AND PIN CUTTER 61 BONE CUTTING INSTRUMENTS 58 BONE FILES AND RASPS 45,46 BONE FORCEPS 58,59 BONE MALLETS 57 BONE RASPS AND FILES 45,46 BONE SAWS 46 BOWMAN LACRIMAL PROBES 50 BOZEMANN UTERINE DRESSING FORCEPS 65 BRAUN EPISIOTOMY SCISSORS 68 BRINKERHOFF RECTAL SPECULUM 70 BROWN NEEDLE HOLDERS 27 BRUN CURETTES 43 BRUN SMARTRACK® 73 BRUNS SHEARS 62 BRUSHES, CLEANING 72 BUCK CURETTES 56 BUCK NEUROLOGICAL HAMMER 1 BUNNELL DRILL 59 BUNT FORCEPS HOLDER 72 BUSCH UMBILICAL SCISSORS 68
CALIPER 51 CANNULATED PIN CUTTER 61 CARBIDE NEEDLE HOLDERS 26-28 CARMALT SPLINTER FORCEPS 25 CAST BREAKER 62 CAST SPREADER 62 CASTROVIEJO CALIPER 51 CAST CA STRO ROVI VIEJ EJO O MIC MICRO RO NE NEED EDLE LE HO HOLD LDER ER 28 CAST CA STRO ROVI VIEJ EJO O MIC MICRO RO TY TYIN ING G FOR FORCE CEPS PS 14 CILIA FORCEPS 52 CLEANING BRUSHES 72 COAKLEY ANTRUM CURETTES 56 COBB SMARTRACK® 73 COLLIER NEEDLE HOLDER 26 COMEDONE EXTRACTORS 47 CONTAINERS, STERILIZING 72-74 CONTAINERS, STORAGE 73,74 COTTLE RASP 45 COTTLE SKIN HOOK 29 COTTON CARRIER 71 CRILE FORCEPS 16 CRILE RETRACTOR 33 CRILE-WOOD NEEDLE HOLDERS 27 CURETTES 43 CUSHING BAYONET FORCEPS 23 CUSHING VEIN RETRACTORS 34
ENGLISH ANVIL NAIL FORCEPS EPISIOTOMY SCISSORS EPPENDORFER BIOPSY PUNCH ESMARCH SHEARS EYE DRESSING FORCEPS EYE INSTRUMENTS EYE SPECULUM
77
PAGE 49 68 66 62 24 50-52 50
F FANSLER-IVES RE RECTAL SP SPECULUM FEILCHENFELD FORCEPS FERGUSON AN ANGIOTRIBE FO FORCEPS FERRIS-SMITH TISSUE FORCEPS FILES AND RASPS FINGER RETRACTORS FINGER RING CUTTER FLAT NOSE PLIERS FLEXIBLE RAKE RETRACTOR FOERSTER SPONGE FORCEPS FOMON RASP FORCEPS HOLDER FORE FO REIG IGN N BOD BODY Y NE NEED EDLE LES S AN AND D SP SPUD UDS S FOX CURETTES FRAZIER HOOKS FRAZIER SUCTION TUBES FREER ELEVATOR FREER SKIN HOOKS
70 25 17 23 45,46 30,31 49 59 31 20 46 72 51 48 29 13 42 30
G
D DAVIS FOREIGN BODY SPUD DAVIS RETRACTOR DE LEE OBSTETRICAL FORCEPS DEAVER RETRACTORS DEAVER SCISSORS DEBAKEY ATRAUMATIC FO FORCEPS DEBAKEY NEEDLE HOLDERS DERF NEEDLE HOLDERS DERMAL INSTRUMENTS DESCHAMPS LIGATURE CARRIER DESMARRES LID RETRACTORS DIAGNOSTIC INSTRUMENTS DILATORS DITTEL URETHRAL SOUNDS DIX SPUD AND NEEDLE DOUBLE ACTION WIRE CUTTER DOUGLAS CILIA FORCEPS DOYEN ABDOMINAL SCISSORS DOYEN CLAMP DRESSIN ING G AND AND TI TIS SSUE FORCE CEP PS DRILLS
DESCRIPTION
51 31 69 36 7 23 27 26 47-49 14 50 1 41,64,65 71 51 61 52 8 18 21-2 -24 4 59
E EAR AND NOSE INSTRUMENTS 53-56 EAR CURETTES 56 EAR DRESSING FORCEPS 55 EAR FORCEPS 53 EAR LOOP 56 EAR SPECULA 53 EASTMAN VA VAGINAL RE RETRACTORS 64 EDNA TOWEL CLAMP 20 ELEVATORS 42 ELLIOT OBSTETRICAL FORCEPS 69 ELLIS FOREIGN BODY SPUD 51 EMME EM METT TT UT UTER ERIN INE E TEN TENAC ACUL ULUM UM HO HOOK OK 65 ENDOCERVICAL BIOPSY CURETTE 67 ENDOCERVICAL SPECULUM 68 ENDOTRACHEAL FORCEPS 19
GELPI RETRACTORS GERZOG BONE MALLET GILLIES HOOKS GILLIES NEEDLE HOLDER GOELET RETRACTOR GRADLE SCISSORS GRAEFE EYE FORCEPS GRAEFE EYE SPECULUM GRAEFE STRABISMUS HOOKS GRAVES SPECULUM GREEN RETRACTOR GREG COMEDONE EXTRACTOR GROOVED DIRECTORS GROSS SPOON AND HOOK GRUBER EAR SPECULA GRUENWALD EAR FORCEPS GUTHRIE HOOK GYNECOLOGICAL IN INSTRUMENTS
38 57 30 27 34 9 24 50 50 63 34 47 13 56 53 53 29 63-69
H HALLE-TIECK SPECULUM 54 HALSEY NEEDLE HOLDERS 26 HALSTED MOSQUITO FORCEPS 15 HAMMERS 1 HANK UTERINE DILATORS 64 HARTMAN EAR SPECULA 53 HARTMANN AL ALLIGATOR FO FORCEPS 55 HAR HA RTMA MANN NN EA EAR R DR DRES ESS SING FORCEPS 55 HARTMANN MOSQUITO FORCEPS 15 HARTMANN NASAL FORCEPS 55 HEANEY UTERINE BIOPSY CURETTE 67 HEATH MALLET 57 HEGAR HEGA R BAUMGA BAUMGARTN RTNER ER NEEDL NEEDLE E HOLDE HOLDER R 26 HEGAR UTERINE DILATORS 64 HEMOSTATIC FORCEPS 15-17 HENNIG PLASTER SPREADER 62 HERCULES SCISSORS 12 HIBBS AND BRUN SMARTRACK® 74
®
ALPHABETICAL INDEX
78
DESCRIPTION
PAGE
HI-LEVEL BANDAGE SCISSORS HILL STITCH SCISSORS HIRSCHMAN RECTAL ANOSCOPE HOKE OSTEOTOMES HOKE SMARTRACK®
5,12 10 70 44 73
DESCRIPTION LOVE NERVE RETRACTORS LUC SEPTUM FORCEPS LUCAE BONE MALLET LUCAE EAR FORCEPS
PAGE 33 55 57 53
M I INGROWN NAIL FORCEPS INSTRUMENT CARE INSTRUMENT CLEANING BRUSH INTESTINAL FORCEPS IRIS FORCEPS IRIS SCISSORS
49 v,vi 72 18 24 3,6,9
J JACKSON TRACHEAL HOOK JACKSON VAGINAL RETRACTORS JAMISON SCISSORS JANSEN EAR FORCEPS JOHNS HOPKINS BULLDOG CLAMPS JONES TOWEL FORCEPS JOSEPH BONE SAWS JOSEPH HOOKS JOSEPH RASP
32 64 4 53 17 20 46 30 45
K K-WIRE DRIVER 60 K-WIRES 60 KELLY FISTULA SCISSORS 8 KELLY FORCEPS 15 KELLY RETRACTORS 36 KERN BONE FORCEPS 59 KEVORKIA IANN-YO YOU UNG NGE E BIO BIOP PSY PUN PUNC CH 66 KEVORKIAN-YOUNGE ENDO BIOPSY BIOPSY CURETTE 67 KEY PERIOSTEAL ELEVATORS 42 KEYES PUNCHES 48 KIELLAND-LUIKART KIELLAND-LUIKAR T OBSTETRICAL OBSTETRICAL FORCEPS 69 KILLIAN NASAL SPECULUM 54 KIRSCHNER WIRES 60 KLEINERT-KUTZ HOOKS 30 KMEDIC CAST SPREADER 62 KMEDIC COMEDONE EXTRACTOR 47 KMEDIC FORCEPS HOLDER 72 KMEDIC SKIN HOOK 29 KMEDIC UTILITY SHEARS 12 KNIGHT SEPTUM FORCEPS 55 KNOWLES BANDAGE SCISSORS 12 KOGAN EN ENDOCERVICAL SP SPECULUM 68
L LA BORDE DILATOR 41 LACRIMAL PROBES 50 LAHEY RETRACTORS 30,33 LAHEY VULSELLUM FORCEPS 18 LAMBOTTE OSTEOTOMES 44 LAMBOTTE SMARTRACK® 74 LANG LA NGEN ENBE BECK CK PERI PERIOS OSTE TEAL AL ELEV ELEVA ATO TORS RS 42 LANGENBECK RETRACTORS 34 LEWIS RASPS 45 LID RETRACTORS 50 LINDE-RAGNELL RETRACTOR 31 LISTER BANDAGE SCISSORS 5,12 LISTON BONE FORCEPS 58 LITTAUER CILIA FORCEPS 52 LITTAUER STITCH SCISSORS 11 LITTLE RETRACTOR 33 LORNA TOWEL CLAMP 20
®
MAGILL ENDOTRACHEAL FORCEPS MALLEABLE RETRACTORS MALLETS MALTZ RASP MARTINI BONE CURETTE MATHIEU NEEDLE HOLDERS MATHIEU RETRACTORS MAYO HEGAR NEEDLE HOLDER MAYO SCISSORS MAYO-COLLINS RETRACTOR MAYO-NOBLE SCISSORS MAYO-STILLE SCISSORS MCGIVNEY FORCEPS MCG MC GIVN VNE EY HE HEMORRHO HOID IDA AL LIG LIGA ATOR MCKENTY ELEVATOR MCLEAN OBSTETRICAL FORCEPS MEAD MALLET METZENBAUM SCISSORS MEYERDING FINGER RETRACTORS MEYHOEFFER CURETTES MICHEL CLIP FORCEPS MICRO MOSQUITO FORCEPS MICRO NEEDLE HOLDERS MIXTER FORCEPS MOSQUITO FORCEPS
19 37 57 45 43 28 32 27 5-7 37 8 7 71 71 42 69 57 4,6,7 33 50 14 15 28 17 15
N NAIL NIPPERS NAIL SPLITTERS NASAL FORCEPS NASAL SPECULUM NEEDLE HOLDERS NEEDLE NOSE PLIERS NERVE RETRACTORS NIEVERT NEEDLE HOLDERS NORTHBENT STITCH SCISSORS NOVAK SUCTION BIOPSY CURETTE NOYES ALLIGATOR FORCEPS
49 48 55 54 26-28 59 33 26 10 67 55
O OB/GYN INSTRUMENTS OBSTETRICAL FORCEPS OBSTETRICAL INSTRUMENTS OLSEN-HEGAR NE NEEDLE HO HOLDERS OPERATING SCISSORS ORTHOPEDIC INSTRUMENTS OSTEOTOMES
PAGE
PLASTER EDGER WOLFF PLASTIC SURGERY SCISSORS PLIERS POOLE SUCTION TUBES PRATT RECTAL SPECULUM PRATT UTERINE DILATORS PRESBYTERIAN TUBE FORCEPS PROBE WITH EYE PROBES PROVIDENCE HOSPITAL FORCEPS PUTTI BONE RASPS
62 9 59 13 70 65 19 13 13 16 46
Q QUIRE MECHANICAL FINGER
53
R RACKS, STERILI RACKS, STERILIZA ZATION TION AND STORA STORAGE GE RAGNELL RETRACTOR RAGNELL SCISSORS RAKE RETRACTORS RALKS DRILL RAN AND DALL SUC UCT TIO ION N BIO BIOP PSY CUR CURE ETT TTE E RANKIN-KELLY FORCEPS RASPS AND FILES RECTAL INSTRUMENTS RETRACTORS RIBBON RETRACTORS RICHARDSON RETRACTORS RICH RI CHAR ARDS DSON ON-E -EAS ASTM TMAN ANN N RETRA RETRACT CTOR OR RIGID RAKE RETRACTOR RING CUTTER ROCHESTER PEAN FORCEPS ROCHESTER-CARMALT FO FORCEPS ROCHESTER-OCHSNER FORCEPS ROD AND PIN CUTTER ROLLET RETRACTORS RONGEURS, BONE ROUX RETRACTORS RULERS RUSKIN RONGEURS RUSKIN-LISTON FORCEPS RUSSIAN TISSUE FORCEPS RYDER MICRO NEEDLE HOLDERS RYDER NEEDLE HOLDERS
73-76 73-76 31 8 31 59 67 15 45,46 70,71 30-41 37 35 35 31 49 16 17 16 61 31 58 37 72 58 58 23 28 28
S 63-69 69 63-69 27 4,6-9 59,60 44
P PARKER RETRACTORS PARKER-MOTT RETRACTOR PEDERSON SPECULUM PEDIATRIC CAST BREAKER PEDIATRIC WIRE CUTTER PEERS TOWEL CLAMP PERCUSSION HAMMER PERIOSTEAL ELEVATORS PIFFARD CURETTES PIN CUTTERS PIN WHEEL PLASTER CAST INSTRUMENTS
DESCRIPTION
37 37 63 62 61 20 1 42 48 60,61 1 62
SAALFELD COMEDONE EXTRACTOR SAROT NEEDLE HOLDERS SAWS SAYRE PERIOSTEAL ELEVATORS SCALPEL HANDLES SCHA SC HAMB MBER ERG G CO COME MEDO DONE NE EX EXTR TRAC ACTO TOR R SCHIOTZ TONOMETERS SCHNIDT FORCEPS SCHROEDER TENACULUM FORCEPS SCHUBERT BIOPSY PUNCH SCISSORS SELF-RETAINING RETRACTORS SEMKEN FORCEPS SENN RETRACTORS SEPTUM FORCEPS SHEEHAN OSTEOTOMES SHORTBENT STITCH SCISSORS SIDE BITE WIRE CUTTER SILICONE MAT SILVER OSTEOTOMES SIMPSON OBSTETRICAL FORCEPS
47 28 46 42 1,2 47 51 17 65 67 3-12 38-40 21 30 55 44 10 61 72 44 69
ALPHABETICAL AND NUMERICAL INDEX DESCRIPTION
PAGE
SIMPSON UTERINE SOUND 65 SIMPSON-LUIKART SIMPSON-LU IKART OBSTETRICAL OBSTETRICAL FORCEP FORCEPS S 69 SIMS RECTAL SPECULUM 70 SIMS SCISSORS 8 SIMS UTERINE CURETTE 68 SIMS UTERINE SOUND 65 SIMS VAGINAL RETRACTOR 64 SISTRUNK SCISSORS 8 SKIN HOOKS 29,30 SLENDER PEDERSON SPECULUM 63 SMARTRACKS® 73-76 SMITH PE PETERSON SM SMARTRACK® 74 SMITHWICK HO HOOK AN AND DISSECTOR 32 SPECULUM, OB/GYN 63,64 SPECULUM, RECTAL 70 SPECULUM, VIENNA 54 SPENCER STITCH SCISSORS 10 SPLINTER FORCEPS 25 SPONGE FORCEPS 20 SPRATT CURETTES 43 STEINMANN PINS 60 STERILIZATION RACKS 73-76 STERILIZING CONTAINER 72 STEVENS SCISSORS 3,9 STEVENS TENOTOMY SCISSORS 3,9 STITCH SCISSORS 10,11 STORAGE CONTAINERS 72 STORAGE RACKS 73-76 STRABISMUS HOOK 50 STRABISMUS SCISSORS 6,9 SUCTION BIOPSY CURETTES 67 SUCTION TUBES 13 SUPER-CUT SCISSORS 3-5
KM # KM 28-460 KM 28-468 KM 28-492 KM 28-514 KM 29-058 KM 29-059 KM 29-060 KM 29-061 KM 29-062 KM 29-064 KM 29-070 KM 29-430 KM 29-434 KM 29-495 KM 29-496 KM 29-497 KM 29-498 KM 29-499 KM 29-500 KM 29-503 KM 29-505 KM 29-507 KM 29-511 KM 29-512 KM 29-513 KM 29-514 KM 29-515 KM 29-517 KM 29-566 KM 29-580 KM 29-582 KM 29-584 KM 29-592
PAGE 1 1 1 1 1 1 2 1 2 2 2 49 49 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 47 47 47 47 47
KM # KM 29-604 KM 29-606 KM 29-620 KM 29-630 KM 31-668 KM 31-680 KM 31-692 KM 31-704 KM 31-708 KM 31-792 KM 31-804 KM 31-830 KM 31-832 KM 31-834 KM 31-836 KM 33-300 KM 33-302 KM 33-304 KM 33-310 KM 33-312 KM 33-314 KM 33-320 KM 33-322 KM 33-324 KM 33-370 KM 33-372 KM 33-374 KM 33-470 KM 33-472 KM 33-474 KM 33-482 KM 33-484 KM 33-486
DESCRIPTION
PAGE
SUTURE INSTRUMENTS SUTURE SCISSORS SWISS JEWELERS STYLE FORCEPS
14 10,11 24
DESCRIPTION UTILITY FORCEPS UTILITY SCISSORS
79
PAGE 19 12
V T TAYLOR PERCUSSION HAMMER TENACULUM FORCEPS TENOTOMY SCISSORS THOMS-GAYLOR BIOPSY PUNCH THUMB FORCEPS TISCHLER BIOPSY PUNCH TISSUE FORCEPS TISSUE NIPPERS TONOMETERS TOWEL AND SPONGE FORCEPS TROSSEAU DILATOR TROUTMAN-BARRAQUER FORCEPS TUBING AND UTILITY FORCEPS TUNGSTEN CARBIDE SCISSORS TUNING FORK TYRELL HOOK
1 65 9 67 21,22 66 21-24 49 51 20 41 52 19 6 56 29
U U.S. ARMY PATTERN OSTEOTOME U.S. ARMY RETRACTOR UMBILICAL SCISSORS UNNA COMEDONE EXTRACTOR URETHRAL SOUNDS UROLOGICAL INSTRUMENTS UTERINE CURETTES UTERINE DILATORS UTERINE DRESSING FORCEPS UTERINE SOUNDS
PAGE 47 47 43 43 12 12 12 12 12 12 12 12 12 12 12 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
44 37 68 47 71 71 67,68 64,65 65 65
KM # KM 33-490 KM 33-492 KM 33-494 KM 33-520 KM 33-522 KM 33-524 KM 33-532 KM 33-534 KM 33-536 KM 33-538 KM 33-540 KM 33-542 KM 33-544 KM 34-140 KM 34-142 KM 34-150 KM 34-152 KM 34-256 KM 34-258 KM 34-260 KM 34-262 KM 34-280 KM 34-282 KM 34-292 KM 34-294 KM 34-306 KM 34-308 KM 34-310 KM 34-312 KM 34-325 KM 34-327 KM 34-334 KM 34-336
VAGINAL RETRACTORS VAGINAL SPECULA VAN BUREN URETHRAL SOUNDS VANGUARD SPLINTER LIBERATOR VEIN RETRACTORS VICKERS EASIDRIVER™ VIENNA SPECULUM VIRTUS SPLINTER FORCEPS VOLKMAN RETRACTORS VOLKMANN CURETTES VORSE TUBE FORCEPS
64 63,64 71 25 34 60 54 25 32 43 19
W WACHENFELDT CLIP FORCEPS WARTENBERG NEURO PIN WHEEL WEBSTER NEEDLE HOLDERS WEITLANER RETRACTORS WIENER SKIN HOOKS WILDE EAR FORCEPS WILLIAMS SPLINTER FORCEPS WILLIGER BONE CURETTES WIRE CUTTERS WIRE CUTTING SCISSORS WIRES AND PINS WITTNER BIOPSY PUNCH
14 1 26 38 29 53 25 43 60,61 11 60 66
X-Y-Z YANKAUER SUCTION TUBE
PAGE 7 7 7 7 7 7 9 9 9 9 9 9 9 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 8
KM # KM 34-356 KM 34-358 KM 34-436 KM 34-438 KM 34-458 KM 34-462 KM 34-466 KM 34-470 KM 34-472 KM 34-474 KM 34-476 KM 34-478 KM 34-486 KM 34-488 KM 34-492 KM 34-494 KM 34-502 KM 34-504 KM 34-560 KM 34-562 KM 34-602 KM 34-607 KM 34-612 KM 35-068 KM 35-080 KM 35-084 KM 35-092 KM 35-104 KM 35-120 KM 35-168 KM 35-170 KM 35-192 KM 35-194
13
PAGE 8 8 7 7 7 7 7 7 7 7 7 7 7 7 7 7 68 68 8 8 8 8 8 10 10 10 10 10 11 11 11 11 11
®
NUMERICAL INDEX
80
KM # KM 35-198 KM 35-200 KM 35-202 KM 35-210 KM 35-212 KM 35-214 KM 35-220 KM 35-250 KM 35-280 KM 35-286 KM 35-292 KM 35-298 KM 35-316 KM 35-322 KM 35-340 KM 35-364 KM 35-370 KM 35-380 KM 35-382 KM 35-392 KM 35-394 KM 35-396 KM 35-406 KM 35-418 KM 35-430 KM 35-450 KM 35-452 KM 35-454 KM 35-460 KM 35-484 KM 35-490 KM 35-494 KM 35-496 KM 35-510 KM 35-515 KM 35-600 KM 35-610 KM 35-620 KM 35-622 KM 35-624 KM 35-626 KM 35-628 KM 35-630 KM 35-640 KM 35-642 KM 35-644 KM 35-646 KM 35-652 KM 35-654 KM 35-670 KM 35-672 KM 35-674 KM 35-676 KM 36-063 KM 36-067 KM 36-076 KM 36-078 KM 36-106 KM 36-108 KM 36-156 KM 36-158 KM 36-160 KM 36-162 KM 36-164 KM 36-165 KM 36-166 KM 36-168 KM 36-176 KM 36-178 KM 36-180
PAGE
KM #
11 11 5 5 5 5 4 4 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 4 6 48 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 15 15 15 15 16 16 15 15 15 15 15 15 15 15 16 16 16
KM 36-182 KM 36-186 KM 36-188 KM 36-196 KM 36-198 KM 36-306 KM 36-308 KM 36-316 KM 36-318 KM 36-326 KM 36-328 KM 36-336 KM 36-338 KM 36-346 KM 36-348 KM 36-356 KM 36-358 KM 36-360 KM 36-362 KM 36-406 KM 36-408 KM 36-416 KM 36-418 KM 36-426 KM 36-428 KM 36-436 KM 36-438 KM 36-446 KM 36-448 KM 36-456 KM 36-458 KM 36-516 KM 36-518 KM 36-536 KM 36-538 KM 36-557 KM 36-562 KM 36-564 KM 36-566 KM 36-696 KM 36-744 KM 36-746 KM 36-816 KM 36-818 KM 36-826 KM 36-828 KM 37-366 KM 37-368 KM 37-370 KM 37-372 KM 37-386 KM 37-388 KM 37-390 KM 37-392 KM 37-444 KM 37-448 KM 37-450 KM 37-452 KM 37-453 KM 37-454 KM 37-455 KM 37-456 KM 37-458 KM 37-462 KM 37-464 KM 37-466 KM 37-468 KM 37-470 KM 37-478 KM 38-076
®
PAGE 16 16 16 15 15 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17 17 17 18 17 17 17 17 17 17 20 20 20 20 20 20 20 20 19 19 19 19 19 19 19 20 20 20 20 20 20 20 20 21
KM # KM 38-080 KM 38-082 KM 38-084 KM 38-088 KM 38-094 KM 38-100 KM 38-106 KM 38-184 KM 38-186 KM 38-264 KM 38-268 KM 38-272 KM 38-276 KM 38-280 KM 38-286 KM 38-290 KM 38-292 KM 38-296 KM 38-304 KM 38-322 KM 38-324 KM 39-050 KM 39-052 KM 39-056 KM 39-057 KM 39-058 KM 39-059 KM 39-060 KM 39-062 KM 39-063 KM 39-064 KM 39-066 KM 39-068 KM 39-070 KM 39-072 KM 39-074 KM 39-076 KM 39-080 KM 39-086 KM 39-088 KM 39-092 KM 39-128 KM 39-132 KM 39-136 KM 39-140 KM 39-192 KM 39-196 KM 39-198 KM 39-310 KM 39-314 KM 39-318 KM 39-322 KM 39-364 KM 39-366 KM 39-386 KM 39-390 KM 39-410 KM 39-412 KM 39-450 KM 39-451 KM 39-452 KM 39-453 KM 39-455 KM 39-456 KM 39-478 KM 39-509 KM 39-511 KM 39-513 KM 39-534 KM 39-536
PAGE 21 23 21 21 21 21 21 23 23 21 21 21 21 21 21 21 21 21 21 23 23 22 22 21 22 21 22 21 21 21 21 21 21 21 21 23 21 21 21 21 22 22 22 22 22 23 23 23 22 22 22 22 25 25 25 25 25 25 24 24 24 24 24 24 25 25 25 25 25 25
KM # KM 39-644 KM 39-646 KM 39-648 KM 39-650 KM 39-670 KM 39-672 KM 39-674 KM 39-682 KM 39-684 KM 39-692 KM 39-694 KM 39-698 KM 39-700 KM 41-064 KM 41-065 KM 41-066 KM 41-067 KM 41-068 KM 41-070 KM 41-092 KM 41-094 KM 41-104 KM 41-106 KM 41-108 KM 41-130 KM 41-132 KM 41-162 KM 41-164 KM 41-166 KM 41-170 KM 41-171 KM 41-172 KM 41-173 KM 41-174 KM 41-175 KM 41-176 KM 41-178 KM 41-198 KM 41-200 KM 41-240 KM 41-242 KM 41-244 KM 41-246 KM 41-248 KM 41-257 KM 41-264 KM 41-265 KM 41-266 KM 41-267 KM 41-268 KM 41-270 KM 41-272 KM 41-278 KM 41-284 KM 41-286 KM 41-300 KM 41-302 KM 41-308 KM 41-314 KM 41-316 KM 41-333 KM 41-424 KM 41-426 KM 41-428 KM 41-432 KM 41-434 KM 41-440 KM 41-446 KM 41-448 KM 41-452
PAGE 19 19 19 19 72 72 72 72 72 72 72 72 72 26 26 26 26 26 26 26 26 26 26 26 27 27 26 26 26 27 27 27 27 27 27 27 27 28 28 28 28 28 28 28 28 28 28 28 28 28 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27
NUMERICAL INDEX KM # KM 41-454 KM 42-148 KM 42-150 KM 42-152 KM 42-154 KM 42-186 KM 42-188 KM 42-190 KM 42-192 KM 42-196 KM 42-198 KM 42-248 KM 42-254 KM 42-256 KM 42-258 KM 42-558 KM 42-560 KM 42-562 KM 42-564 KM 42-608 KM 42-610 KM 42-612 KM 42-614 KM 42-616 KM 42-618 KM 42-620 KM 42-646 KM 42-647 KM 42-648 KM 42-649 KM 42-654 KM 42-655 KM 42-656 KM 42-823 KM 42-824 KM 42-825 KM 42-826 KM 42-830 KM 42-832 KM 42-834 KM 42-836 KM 42-844 KM 42-852 KM 43-105 KM 43-107 KM 43-110 KM 43-112 KM 43-116 KM 43-124 KM 43-168 KM 43-310 KM 43-324 KM 43-326 KM 43-520 KM 43-524 KM 46-060 KM 46-090 KM 46-134 KM 46-138 KM 46-184 KM 46-186 KM 46-188 KM 46-222 KM 46-224 KM 46-258 KM 46-260 KM 46-262 KM 46-264 KM 46-266 KM 46-268
PAGE 27 28 28 28 28 28 28 28 28 28 28 14 14 14 14 14 14 14 14 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 18 18 18 18 18 18 18 18 18 18 18 18 62 62 62 62 62 62 62 42 42 42 42 42 42 42 44
KM # KM 46-270 KM 46-272 KM 46-274 KM 46-276 KM 46-278 KM 46-280 KM 46-284 KM 46-286 KM 46-288 KM 46-304 KM 46-306 KM 46-310 KM 46-314 KM 46-318 KM 46-322 KM 46-328 KM 46-329 KM 46-330 KM 46-331 KM 46-332 KM 46-333 KM 46-335 KM 46-336 KM 46-338 KM 46-340 KM 46-342 KM 46-343 KM 46-344 KM 46-345 KM 46-346 KM 46-347 KM 46-348 KM 46-349 KM 46-350 KM 46-351 KM 46-352 KM 46-353 KM 46-354 KM 46-355 KM 46-356 KM 46-358 KM 46-497 KM 46-498 KM 46-499 KM 46-500 KM 46-501 KM 46-502 KM 46-503 KM 46-504 KM 46-511 KM 46-512 KM 46-513 KM 46-515 KM 46-517 KM 46-519 KM 46-521 KM 46-523 KM 46-525 KM 46-529 KM 46-531 KM 46-540 KM 46-544 KM 46-544P KM 46-545 KM 46-545P KM 46-546 KM 46-547 KM 46-550 KM 46-560 KM 46-561
PAGE 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 43 43 43 43 43 43 43 43 43 43 43 60 72 72 72 72 72 72 43 43 43
KM # KM 46-562 KM 46-563 KM 46-564 KM 46-565 KM 46-566 KM 46-567 KM 46-568 KM 46-569 KM 46-570 KM 46-571 KM 46-621 KM 46-622 KM 46-624 KM 46-625 KM 46-626 KM 46-647 KM 46-650 KM 46-652 KM 46-654 KM 46-655 KM 46-656 KM 46-657 KM 46-660 KM 46-661 KM 46-662 KM 46-663 KM 46-700 KM 46-701 KM 46-702 KM 46-703 KM 46-704 KM 46-706 KM 46-708 KM 46-709 KM 47-062 KM 47-064 KM 47-398 KM 47-400 KM 47-402 KM 47-404 KM 47-410 KM 47-412 KM 47-520 KM 47-522 KM 47-523 KM 47-526 KM 47-527 KM 47-528 KM 47-531 KM 47-532 KM 47-534 KM 47-538 KM 47-540 KM 47-542 KM 47-550 KM 47-555 KM 47-557 KM 48-158 KM 48-161 KM 48-245 KM 48-246 KM 48-390 KM 48-392 KM 49-168 KM 49-170 KM 49-172 KM 49-180 KM 49-182 KM 49-184 KM 49-210
PAGE 43 43 43 43 43 43 43 43 43 43 61 61 61 60 61 61 46 46 46 46 57 57 57 57 57 57 44 44 44 44 44 44 44 44 59 59 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 29 29 59 59 59 59 23 23 23 23 23 23 23
KM # KM 49-212 KM 49-216 KM 49-310 KM 49-311 KM 49-312 KM 49-313 KM 49-320 KM 49-602 KM 49-604 KM 49-606 KM 49-608 KM 49-610 KM 49-618 KM 49-620 KM 49-622 KM 49-624 KM 49-626 KM 51-100 KM 51-104 KM 51-108 KM 51-112 KM 51-178 KM 51-200 KM 51-202 KM 51-204 KM 51-206 KM 51-210 KM 51-212 KM 51-214 KM 51-216 KM 51-218 KM 51-220 KM 51-222 KM 51-230 KM 51-232 KM 51-234 KM 51-236 KM 51-238 KM 51-240 KM 51-242 KM 51-372 KM 51-376 KM 51-388 KM 51-468 KM 51-480 KM 51-482 KM 51-494 KM 51-498 KM 51-500 KM 51-502 KM 51-520 KM 51-521 KM 51-523 KM 51-524 KM 51-528 KM 51-530 KM 51-532 KM 51-534 KM 51-752 KM 51-755 KM 51-766 KM 51-768 KM 51-770 KM 51-772 KM 51-776 KM 52-040 KM 52-042 KM 52-050 KM 52-055 KM 52-060
81
PAGE 23 23 42 42 42 42 32 17 17 17 17 17 17 17 17 17 17 34 34 34 34 53 35 35 35 35 35 35 35 36 36 36 36 36 36 36 36 36 36 36 37 34 37 33 37 37 37 37 37 37 33 34 34 34 33 33 33 33 37 37 37 37 37 37 37 30 30 29 29 30
®
NUMERICAL INDEX
82
KM # KM 52-064 KM 52-068 KM 52-076 KM 52-082 KM 52-086 KM 52-087 KM 52-088 KM 52-090 KM 52-092 KM 52-093 KM 52-094 KM 52-096 KM 52-116 KM 52-118 KM 52-122 KM 52-124 KM 52-128 KM 52-130 KM 52-156 KM 52-158 KM 52-162 KM 52-164 KM 52-166 KM 52-172 KM 52-174 KM 52-176 KM 52-182 KM 52-184 KM 52-188 KM 52-192 KM 52-198 KM 52-202 KM 52-204 KM 52-206 KM 52-208 KM 52-212 KM 52-214 KM 52-216 KM 52-254 KM 52-258 KM 52-262 KM 52-264 KM 52-266 KM 52-268 KM 52-272 KM 52-274 KM 52-276 KM 52-358 KM 52-380 KM 52-414 KM 52-416 KM 52-417 KM 52-418 KM 52-470 KM 52-472 KM 52-474 KM 52-476 KM 52-492 KM 52-494 KM 52-498 KM 52-502 KM 52-504 KM 52-506 KM 52-518 KM 52-522 KM 52-524 KM 52-526 KM 52-530 KM 52-532 KM 52-534
PAGE
KM #
30 30 31 30 30 30 30 30 32 32 31 32 33 33 33 33 33 33 31 31 31 31 31 31 31 31 31 31 31 31 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 41 41 38 38 38 38 40 40 40 39 38 38 38 38 38 38 38 38 38 38 38 38 38
KM 52-536 KM 52-538 KM 52-540 KM 52-542 KM 52-544 KM 52-768 KM 52-769 KM 52-776 KM 52-778 KM 52-780 KM 53-040 KM 53-056 KM 53-058 KM 53-060 KM 53-062 KM 53-064 KM 53-066 KM 53-068 KM 53-072 KM 53-080 KM 53-084 KM 53-138 KM 53-160 KM 53-164 KM 53-168 KM 53-172 KM 53-174 KM 53-176 KM 53-316 KM 53-318 KM 53-368 KM 53-372 KM 53-374 KM 53-380 KM 53-382 KM 53-384 KM 53-404 KM 53-408 KM 53-420 KM 53-422 KM 53-426 KM 53-428 KM 53-440 KM 53-450 KM 53-456 KM 53-460 KM 53-560 KM 53-564 KM 53-568 KM 53-580 KM 54-080 KM 54-108 KM 54-110 KM 54-272 KM 54-280 KM 54-282 KM 54-284 KM 54-307 KM 54-309 KM 54-311 KM 54-313 KM 54-330 KM 54-332 KM 54-334 KM 54-338 KM 54-342 KM 54-346 KM 54-348 KM 54-350 KM 54-358
®
PAGE 38 38 38 38 38 38 38 38 38 38 51 51 51 51 51 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 24 24 24 24 24 24 24 24 24 24 52 52 52 14 14 52 52 52 52 52 50 50 50 51 51 51 51 50 50 50 50 50 50 50 29 29 29 29 29 50
KM # KM 54-360 KM 54-362 KM 54-364 KM 54-366 KM 54-368 KM 54-372 KM 54-713 KM 54-715 KM 54-717 KM 54-719 KM 54-721 KM 54-723 KM 55-094 KM 55-100 KM 55-160 KM 55-162 KM 55-164 KM 55-166 KM 55-168 KM 55-174 KM 55-188 KM 55-192 KM 55-194 KM 55-198 KM 55-210 KM 56-059 KM 56-061 KM 56-063 KM 56-065 KM 56-067 KM 56-074 KM 56-076 KM 56-078 KM 56-080 KM 56-082 KM 56-085 KM 56-086 KM 56-087 KM 56-088 KM 56-089 KM 56-091 KM 56-092 KM 56-093 KM 56-094 KM 56-095 KM 56-096 KM 56-098 KM 56-100 KM 56-104 KM 56-168 KM 56-170 KM 56-172 KM 56-174 KM 56-180 KM 56-182 KM 56-184 KM 56-186 KM 56-284 KM 56-312 KM 56-318 KM 56-330 KM 56-334 KM 56-342 KM 57-058 KM 57-064 KM 57-070 KM 57-098 KM 57-100 KM 57-104 KM 57-110
PAGE 50 50 50 31 31 31 50 50 50 50 50 50 53 53 55 55 55 55 55 55 55 55 55 55 53 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 56 53 53 53 53 53 53 53 53 56 56 56 56 56 56 54 54 54 54 54 54 54
KM # KM 57-112 KM 57-114 KM 57-120 KM 57-130 KM 57-132 KM 57-134 KM 57-136 KM 57-138 KM 57-140 KM 57-164 KM 57-176 KM 57-182 KM 57-614 KM 57-620 KM 57-622 KM 58-050 KM 58-052 KM 58-060 KM 58-062 KM 58-066 KM 58-068 KM 58-072 KM 58-073 KM 58-075 KM 58-076 KM 58-077 KM 58-083 KM 58-088 KM 58-091 KM 58-092 KM 58-093 KM 58-094 KM 58-096 KM 58-097 KM 58-098 KM 58-100 KM 58-102 KM 58-104 KM 58-228 KM 58-230 KM 58-500 KM 58-502 KM 59-064 KM 59-066 KM 61-338 KM 61-344 KM 63-300 KM 63-304 KM 63-312 KM 63-318 KM 63-319 KM 63-330 KM 63-332 KM 63-334 KM 63-350 KM 63-352 KM 63-354 KM 63-382 KM 63-479 KM 63-503 KM 64-008 KM 64-010 KM 64-012 KM 64-014 KM 64-016 KM 64-018 KM 64-020 KM 64-022 KM 64-024 KM 64-026
PAGE 54 54 54 56 56 56 56 56 56 53 53 55 42 42 42 46 46 45 45 45 45 45 45 42 42 30 30 30 30 30 30 30 46 46 46 44 44 44 13 13 19 19 17 17 41 41 70 70 70 70 70 70 70 70 70 70 70 71 71 71 71 71 71 71 71 71 71 71 71 71
NUMERICAL INDEX KM # KM 64-028 KM 64-030 KM 64-032 KM 64-034 KM 64-106 KM 64-108 KM 64-110 KM 64-112 KM 64-114 KM 64-116 KM 64-118 KM 64-120 KM 64-124 KM 64-126 KM 64-128 KM 64-130 KM 64-132 KM 64-134 KM 64-136 KM 64-256 KM 64-262 KM 64-266 KM 64-278 KM 64-280 KM 64-282 KM 64-288 KM 64-290 KM 64-328 KM 64-329 KM 64-330 KM 64-332 KM 64-402 KM 64-404 KM 64-406 KM 64-410 KM 64-412 KM 64-414 KM 64-420 KM 64-422 KM 64-424 KM 64-562 KM 64-566 KM 64-568 KM 64-574 KM 64-580 KM 64-584 KM 64-592 KM 64-604 KM 64-616 KM 64-618 KM 64-624 KM 64-630 KM 64-634 KM 64-642 KM 64-648
PAGE 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 71 63 63 63 63 63 63 63 63 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64
KM # KM 64-650 KM 64-658 KM 64-662 KM 64-666 KM 64-670 KM 64-674 KM 64-678 KM 64-702 KM 64-706 KM 64-710 KM 64-764 KM 64-786 KM 64-788 KM 64-796 KM 64-802 KM 64-808 KM 64-830 KM 65-084 KM 65-115 KM 65-118 KM 65-162 KM 65-178 KM 65-180 KM 65-184 KM 65-186 KM 65-188 KM 65-347 KM 65-349 KM 65-351 KM 65-353 KM 65-355 KM 65-357 KM 65-359 KM 65-361 KM 65-468 KM 65-470 KM 65-474 KM 65-490 KM 65-492 KM 65-494 KM 65-496 KM 65-498 KM 66-056 KM 66-058 KM 66-268 KM 66-274 KM 67-164 KM 67-166 KM 67-168 KM 67-170 KM 67-172 KM 67-174 KM 67-292 KM 67-294 KM 67-498
PAGE 64 65 65 65 65 65 65 65 65 65 67 67 67 67 67 67 68 67 67 67 66 66 66 66 66 66 68 68 68 68 68 68 68 68 65 65 65 65 65 65 65 65 65 65 65 65 8 8 8 8 8 8 68 68 69
KM # KM 67-500 KM 67-502 KM 67-504 KM 67-509 KM 67-511 KM 67-516 KM 67-520 KM 67-526 KM 69-292 KM 69-294 KM 69-320 KM 69-322 KM 69-326 KM 69-327 KM 69-340 KM 69-348 KM 69-410 KM 69-412 KM 69-430 KM 69-432 KM 69-543 KM 69-544 KM 69-545 KM 69-982 KM 71-100 KM 71-101 KM 71-102 KM 71-103 KM 71-104 KM 71-110 KM 71-111 KM 71-112 KM 71-113 KM 71-114 KM 71-120 KM 71-121 KM 71-122 KM 71-123 KM 71-124 KM 71-150 KM 71-151 KM 71-152 KM 71-153 KM 71-154 KM 71-160 KM 71-161 KM 71-162 KM 71-163 KM 71-164 KM 71-210 KM 71-211 KM 71-212 KM 71-213 KM 71-214 KM 71-240
PAGE 69 69 69 69 69 69 69 69 49 49 48 48 48 48 48 49 49 49 49 49 45 45 45 31 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
KM # KM 71-241 KM 71-242 KM 71-243 KM 71-244 KM 71-450 KM 71-453 KM 71-456 KM 71-459 KM 71-462 KM 71-465 KM 71-468 KM 71-480 KM 71-483 KM 71-486 KM 71-489 KM 71-492 KM 71-495 KM 71-498 KM 71-510 KM 71-513 KM 71-516 KM 71-519 KM 71-522 KM 71-525 KM 71-528 KM 71-600 KM 71-603 KM 71-606 KM 71-609 KM 71-612 KM 71-615 KM 71-618 KM 71-630 KM 71-633 KM 71-636 KM 71-639 KM 71-642 KM 71-645 KM 71-648 KM 71-660 KM 71-663 KM 71-666 KM 71-669 KM 71-672 KM 71-675 KM 71-678 KM 98-125 KM 98-150 KM 98-160 KM 98-170 KM 98-180 KM 98-190 KM 98-195
83
PAGE 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 72 73 73 73 74 74 74
®
Ruler MM and Inches Conversions:
mm
inches
0
0
Inches to MM Multiply the inch dimension by 25.4 to obtain the size in millimeters. MM to Inches Multiply the millimeter dimension by .0394 or divide by 25.4 to obtain the size in inches.
10
20 1 30
40
50
2
60
70
3 80
90
100
4
110
120
5 130
140
150 6
160
170
7 180
190
200 8
210
220
Fahrenheit to Centigrade Fahrenheit or Celsius Degrees Subtract 32 from Fahrenheit temperature. Multiply result by 5. Divide result by 9. Celsius or Centigrade to Fahrenheit Multiply Centigrade temperature by 9. Divide result by 5. Add to 32.
What to look for in a KMedic Certified Instrument. On the surface it’s difficult to tell one instrument from another. But in fact, many qualities distinguish KMedic Certified Instruments from those of other manufacturers. Our instruments are the product of a working knowledge of the surgeon’ss art, exacting surgeon’ manufacturing specifications and strict adherence to our Quality Assurance Program. From its origins origins as as an idea, idea, to the crafting of the prototype, typ e, to its appe appearan arance ce on a surgical tray, it takes approximately 80 steps to create a KMedic Certified Instrument. Every finished instrument is the result of years of performance monitoring and continual improvements. Which is why we guarantee every KMedic Certified Instrument for life. At every stage of the manufacturing process superior quality is built into our instruments. Nevertheless before our instruments find themselves in a surgeon’s
hand, they are subject to an inspection process that includes:
Visual inspection against a master sample to assure pattern consistency Exacting caliper and micrometer measurements of critical dimensions
The Ruskin Rongeur, shown here, is typical of KMedic craftsmanship. From its perfect symmetry to its glare-diminishing finish, it provides surgeons with the qualities they require to perform at their best. A closer inspection reveals:
Function tests to ensure adherence to performance standards Surface audits to detect imperfections and irregulari irregularities ties
Expertly sharpened jaws for accurate cutting
Corrosion and hardness tests to guarantee functionality and longevity Cutting tests to assure jaws will meet the special demands of bone cutting Maintenance of product history
Manufacturing code to expedite tracing Correct spring tension and size for optimum control and motion
®
Ideal handle dimensions dimensio ns for the right heft and feel
Silk matte hand-finished surface for corrosion resistance
Precise geometric design, precision milling and assembly for proper balance and smooth mechanical action
KMedic number for easy reorder
®
Teleflex Medical 2917 Weck Drive Research Triangle Park NC 27709 USA Toll free: 866.246.6990 Intl: 919.544.8000 Fax: 919.361.3914 www.teleflexmedical.com
©2008 Teleflex Incorporated KMAD- 4 Rev. 05/08