TOOL RUN OUT DETECTION IN CNC MACHINES Submitted in partial fulfillment of the requirements for the award of Bachelor of Engineering degree in Mechanical Engineering by SUNDARAMOORTHY.S (3045246) VIJAYAMUDHAN.E (3045273)
DEPARTMENT OF MECHANICAL ENGINEERING
SATHYABAMA UNIVERSITY JEPPIAAR NAGAR, RAJIV GANDHI SALAI, S ALAI, CHENNAI – 600119,TAMILNADU.
SEPTEMBER 2013
SATHYABAMA UNIVERSITY (Established under Section 3 of UGC Act, 1956)
JEPPIAAR NAGAR, RAJIV GANDHI SALAI, 600 119 www.sathyabamauniversity.ac.in
DEPARTMENT OF MECHANICAL ENGINEERING
BONAFIDE CERTIFICATE
This
is
to
certify
that
this
Project
Report
is
the
bonafide
work
of
Sundaramoorthy.S(3045246),Vijayamudhan.E(3045273),who carried out the project entitled “ TOOL
RUN OUT DETECTION IN CNC MACHINES ” under my supervision
from June 2013 to September 2013.
Internal Guide Mr. P.AMITH KISHORE, M.E.,
Head of the Department (Academics) Dr.A .KRISHNAMOORTHY, M.E., Ph.D., Submitted for Viva voce Examination held on_____________________
Internal Examiner
External Examiner
DECLARATION
I Sundaramoorthy.S (3045246) hereby declare that the project entitled
“
TOOL
RUN OUT DETECTION IN CNC MACHINES ” done by me under the guidance of Mr.P.Amith Kishore, M.E., Department of Mechanical Engineering is submitted in partial fulfillment of the requirements for the award of Bachelor of Engineering degree in Mechanical Engineering
DATE: PLACE: Chennai
SIGNATURE OF THE CANDIDATE
ACKNOWLEDGEMENT
The satisfaction and elation that accompany the successful completion of any task would be incomplete without the mention of the people who have made it a possibility. It is my great privilege to express my gratitude and respect to all those who have guided me and inspired me during the course of the project work.
First and foremost, I would express my sincere gratitude to our respected Chancellor Col. Dr. JEPPIAAR, M.A., B.L., Ph.D., and also my sincere thanks to our beloved Directors
Dr. Marie Johnson, B.E.,M.B.A., M.Phil., Ph.D., and
Dr. Mariazeena Johnson, B.E., M.B.A., M.Phil., Ph.D., for
providing
me
the
necessary facilities for the completion of my project. Also ,I acknowledge our Vice Chancellor Dr. B.Sheela Rani, M.S(By Research)., Ph.D., for her constant support and endorsement
I also like to express my gratitude to Dr. S.Ramachandran, M.E., Ph.D., Professor
and
Engineering,
Head
and
(Administration
&Research),Department
Dr.A.Krishnamoorthy,
M.E.,
Ph.D.,
of
Professor
Mechanical and
Head
(Academics),Department of Mechanical Engineering and our sincere thanks to our Internal guide
Mr. P.Amith Kishore M.E., Asst.Professor,
Mechanical Engineering for having a constant
source
of
Department of support
and
encouragement for the completion of this project.
I would like to thank my family members and friends for their encouragement and support. Eventually, I express my sense of gratitude to one and all who directly and indirectly extended their valuable help and guidance in completing this project in a successful manner.
