[Back To Main Menu] 1. When adding a user to your local ppp secrets/ppp profiles database, it is possible to
00:32:27 last save: 2011-04-18 03:22:01
A. Allow/deny use of more than one login by this user
Save progress
B. Allow only pppoe login C. Set max values for total transferred bytes (up- and download) D. Allow login by pppoe and pptp, but deny login by l2tp E. Deny services (like telnet) only for this user or for one group of users 2. What is necessary for PPPoE client configuration? A. ip firewall nat masquerade rule B. Interface (on which PPPoE client is going to work) C. Static IP address on PPPoE client interface 3. An IP address pool can contains addresses from more than one subnets. true
Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Tiktube : Newsletters : Twitter
4/17/11 8:22 PM
MikroTik Routers and Wireless
https://www.mikrotik.com/client/index.php?ecom...
A. To identify a station in Neighbor discovery B. To identify a station in the Access List C. To identify a station in a list of connected clients 9. Which of the following Routes statuses are possible? A. S = Static B. C = Connected C. A = Active
00:32:27 last save: 2011-04-18 03:22:01
Save progress
D. D = Drop 10. The first two rules in the forward chain of the filter table are: /ip firewall filter add chain=forward connection-state=established action=accept /ip firewall filter add chain=forward connection-state=invalid action=drop Connection-state=related packets are not filtered by the rules above. true
Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Tiktube : Newsletters : Twitter
4/17/11 8:22 PM
MikroTik Routers and Wireless
https://www.mikrotik.com/client/index.php?ecom...
C. Tool Torch D. Firewall Counters 16. What is the correct action to be specified in the NAT rule to hide a private network when communicating to the outside world? A. tarpit
00:32:27
B. allow C. masquerade D. passthrough
last save: 2011-04-18 03:22:01
Save progress
17. Mark correct answers for action=dstnat in chain=dst-nat. A. Add destination address to address-list B. Change destination address and port C. Change source address and port D. NAT source address 18. For static routing functionality, additionally to the RouterOS system package, you will also need the following software package: A. dhcp B. none C. advanced-tools D. routing 19. If you need to make sure that one computer in your HotSpot network can access the Internet without HotSpot authentication, which menu allows you to do this? A. Users B. Walled-garden IP C. IP bindings D. Walled-garden 20. Collisions are possible in full-duplex Ethernet networks false