informe de configuración de routers con OSPF en GNS3Descripción completa
Material didático de apoio ao curso OSPF Avançado, elaborado pela Escola Superior de Redes, que apresenta os detalhes de funcionamento do protocolo OSPF, permitindo ao aluno entender como su…Descrição completa
vyatta ospf
tp protocol routage ospf
Material didático de apoio ao curso OSPF Avançado, elaborado pela Escola Superior de Redes, que apresenta os detalhes de funcionamento do protocolo OSPF, permitindo ao aluno entender como su…Full description
Full Answers: https://ccnav6.com/ccna-3-v5-0-v6-0-ospf-practice-skills-assessment-exam-answer.html
Descripción completa
Full description
Descripción completa
ospfFull description
Full description
Resumen sobre el protocolo de direccionamiento de redes
ERouting OSPF PT Practice SBA A few things to keep in mind while completing this activity: 1.
Do not use the browser Back button or close or reload any exam windows during the exam.
2. 3.
Do not close Packet Tracer when you you are done. It will close automatically. Click the Submit Assessment button to submit your work.
Introduction In this practice Packet Tracer Skills Exam, you will: • •
finish the configuration of a partially configured network establish connectivity to the East Region and the Internet through the use of static and dynamic routing
Addressing Table Device
Interface
Address
Subnet Mask
S0/0/0
172.16.100.245
255.255.255.252
S0/0/1
172.16.100.241
255.255.255.252
S0/1/0
209.165.201.2
255.255.255.252
S0/1/1
192.0.0.1
255.255.255.252
Lo0
10.0.0.4
255.255.255.255
Fa0/0
172.16.100.1
255.255.255.128
n/a
S0/0/0
172.16.100.246
255.255.255.252
n/a
Lo0
10.0.0.1
255.255.255.255
n/a
Fa0/0
172.16.100.129
255.255.255.192
n/a
Fa0/1
172.16.100.225
255.255.255.240
n/a
S0/0/0
172.16.100.242
255.255.255.252
n/a
Lo0
10.0.0.2
Fa0/0
172.16.100.193
255.255.255.224
n/a
Fa0/1
172.16.100.226
255.255.255.240
n/a
Lo0
10.0.0.3
255.255.255.255
n/a
WPC1
NIC
172.16.100.126
255.255.255.128
172.16.100.1
WPC2
NIC
172.16.100.190
NetAdmin
NIC
172.16.100.130
255.255.255.192
172.16.100.129
Payroll
NIC
172.16.100.194
255.255.255.224
172.16.100.193
WestHQ
W-Branch1
W-Branch2
ServerFarm
Default Gateway
Fa0/1
255.255.255.255
255.255.255.192
n/a
172.16.100.129
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
Step 1: Finish the IP Addressing. Note: Initially, you can only access router W-Branch2 through the console connection on NetAdmin. a. Configure and verify interface addressing on W-Branch2. •
Configure and activate all interfaces for W-Branch2 that are listed in the addressing table.
configure terminal interface fa0/0 ip address 172.16.100.129 255.255.255.192 no shutdown exit interface fa0/1 ip address 172.16.100.225 255.255.255.240 no shutdown exit interface se0/0/0 ip address 172.16.100.242 255.255.255.252 no shutdown interface loopback 0 ip address 10.0.0.2 255.255.255.255
b. Configure the correct IP addresses on WPC2 and W-Branch1. •
Configure WPC2 with the last IP address in the subnet.
172.16.100.129 255.255.255.192 dirección de la interfaz en el router
/26 172
10|000001 10 0 AND 11|000000 255 25 25 5 5 10|000000 172 16 10 Dirección 0 de red 172.16.100.128 dirección de red 26 = 64 Subred 1 172.16.100.128 broadcast 172.16.100.191 Rango ips 172.16.100.129 - 172.16.100.190 Subred 2 172.16.100.192 16
Configure the Fa0/1 interface on W-Branch1 with the last IP address in the subnet.
172.16.100.225 255.255.255.240 dirección de la interfaz en el router WB2
/28 1110|0001 172 16 100 AND 1111|0000 255 255 255 1110|0000 172 16 100 Dirección de red 172.16.100.224 dirección de red 4 2 = 16 Subred 1 172.16.100.224 broadcast 172.16.100.239 Rango ips 172.16.100.225 - 172.16.100.238 Subred 2 172.16.100.240
WB1 en fa0/1 172.16.100.238 255.255.255.240
c. Verify connectivity.
Step 2: Discover the Network. •
Explore the network to determine the IP addressing of the serial interfaces that WestHQ shares with W-Branch1 and W-Branch2. En WB2 la interface se0/0/0 tiene la ip 172.16.100.242 255.255.255.252 WHQ IP 172.16.100.241
•
Remotely access WestHQ. WB2#telnet 172.16.100.241
Step 3: Configure Static and Default Routing. a. Configure connectivity to the East Region. •
Using the next hop address 192.0.0.2, configure one summary static route on WestHQ for the entire East Region. The East Region subnets are listed in the following table:
East Region Subnets 192.168.0.0/25 192.168.0.128/25 192.168.1.0/26 192.168.1.64/26 192.168.1.128/26 192.168.1.192/27 192.168.1.224/28 192.168.1.240/30 192.168.1.244/30
192.168.1.248/30 192.168.1.252/30 Se coloca en binario el o los octetos que cambian se deja igual hasta lo común y de resto todo en cero. La mascara es hasta lo común. Direcciones originales 192 192 192 192 192 192 192 192 192 192 192 192
Direccion de red sumarizada 192.168.0.0 /23 255.255.254.0 Ruteo estatico por siguiente salto para dirección sumarizada ip route 192.168.0.0 255.255.254.0 192.0.0.2 •
Configure a default route on WestHQ to send to the Internet all other traffic for destinations that are not found in the WestHQ routing table. Use the outbound interface argument.
ip route 0.0.0.0 0.0.0.0 se0/1/0
b. Verify static and default routing. Probar ruteo -- Todas deben dar ok WHQ#ping 64.100.1.1 WHQ#ping 192.168.1.66 WHQ#ping 192.168.0.1 WHQ#ping 192.168.0.129 WHQ#ping 192.168.1.1
Step 4: Configure OSPF Routing. a. Configure OSPF on WestHQ, W-Branch1, and W-Branch2. •
Use OSPF process ID 1 and area 0. router ospf 1
•
Advertise each subnet individually with its corresponding wildcard mask. On WestHQ, do not advertise the subnet to the Internet or the subnet to East Region.
255.255.255.255 255.255.255.252 0.
0.
0.
3
network 172.16.100.245 0.0.0.3 area 0 network 172.16.100.241 0.0.0.3 area 0 network 10.0.0.4 area 0
•
Disable OSPF updates out interfaces where there are no OSPF neighbors available. WB1(config)#route ospf 1 WB1(config-router)#passive-interface fa0/0 WB2(config)#route ospf 1 WB2(config-router)#passive-interface fa0/0
•
Configure WestHQ to send the default route to W-Branch1 and W-Branch2 in OSPF updates. Default information
b. Modify the default OSPF operation. •
Configure W-Branch1 to always be the DR by using a priority of 100.
•
Configure W-Branch2 to always be the BDR by using a priority of 50.
•
•
Change the hello interval to 20 seconds on W-Branch1 and W-Branch2 for the LAN that these two routers share with ServerFarm. Verify OSPF neighbor status.
c. Verify that OSPF is fully operational. •
Verify that the routing tables on W-Branch1, W-Branch2, and WestHQ contain all the expected routes. It may be necessary to shutdown and then reactivate interfaces to force OSPF to converge.
Step 5: Verify Full Connectivity. Although these are not scored, the following connectivity tests should be successful. • •
•
•
To test the static route to East Region, successfully ping between WestHQ and EPC1. To test the OSPF neighbor establishment with ServerFarm, successfully ping between WPC1 and Payroll. To test end-to-end connectivity between the East and West Regions, successfully ping between WPC2 and EPC3. To test the default route, successfully ping the Cisco Server from NetAdmin.