Envision ™
Glass Walls Vii s i on Sy V Syst stee m s Structural Glass Walls
G L A S S W A L L S
E N V I S I O N ™
Envision ™ Glass Walls E n v i s i o n
™
G l a s s W a l l s
Envision ™ Glass Walls are designed to be structurally sound yet they provide the maximum opportunity to showcase unique architectural styles by displaying the versatility of glass combined with the functionality of the design.
4.0
vitroamerica.com
s l l a W s s a l G ™
n o i s i v n E
vitroamerica.com
Vision Systems E n v i s i o n
Envision™ Glass Walls by Vitro America™ include custom fabricated glass and unique styles of hardware to create glass walls, with or without entrances, allowing the maximum view of the interior space. The result is a remarkable layout and unique accoutrements of the Vision Systems to differentiate the overall building design.
™
G l a s s W a l l s
Design Elements •
•
•
•
•
Typically single lite in height, and may or may not include an entrance. Add dimension to any desi gn space. Use a full rail system to complement the entrance door style or hide the glazing channel for a full view of the glass. Create the illusion of a larger interior with no boundaries. May utilize patch fittings, “U” channel or full rails.
4.1 Note: A variety of powder coat finishes a re available—see Glass & Metal Finish Selection.
vitroamerica.com
Vision Systems s l l a W s s a l G
Design Confgurations Vision Systems can be configured in many different ways to meet your design needs. Vitro America's design team can assist with any special requirements.
™
n o i s i v n E
1
4.2
2
3
7
8
12
13
4
5
6
9
14
10
11
15
Note: Consult factory for additional information and finish s amples. Please specify alloy designation to ensure proper finish selection using
the Copper Development Association code. A variety of powder coat finishes are available—see the Glass & Metal Finish section.
vitroamerica.com
Vision Systems E n v i s i o n
Sidelite Details Sidelites (fixed panels) may be designed using continuous horizontal rails top and bottom (bottom left diagram), rail on the top and a recessed “U” channel at the bottom (top right diagram), a rail on the bottom and patch fittings on the top, or other combinations of these options. Different combinations from Vitro America allow the flexibility needed to make any project effective, efficient, and remarkable.
™
G l a s s W a l l s
Note:
This glazing section is suitable for 3/ 8 or 1/2 glass.
˝
˝
DETAIL OF SIDELITES WITH CHANNEL
SIDELITE & DOOR DETAILS AT HALF SCALE
4.3
vitroamerica.com
Vision Systems | Hardware s l l a W s s a l G
Patch Fittings Patch fittings are available in a wide range of styles, providing tempered glass assemblies that are technically sound and visually attractive. This range gives the architect or designer a variety of creative options for expression with toughened glass—either internally or externally. All fittings are based on a modular system, consisting of a base unit, functional inserts, and clip-on covers in an assortment of finishes. Glass preparations are quick and easy. Quality materials and thorough workmanship guarantee a long service life and a reflection of excellence for years to come.
™
n o i s i v n E
Patch Fittings: Center Hung Doors Type BP, A & F TOP INSERT FOR OVERHEAD CONCEALED CLOSER
PIVOT INSERT »
CL-319.2
»
FLOOR BEARING PIVOT
BOTTOM SPINDLE INSERT »
CL-319.1
»
˝
LOWER / UPPER BASE PATCH FITTING »
PATCH COVER
CL-317
Note: Please specify finish for patch plate cover: Clear 101, Black 109, Brass Satin 599, Bronze Polished 601 Satin 600,
Dark Bronze 108, Brass Polished 503, Stainless Steel Polished 701, Satin 700. Custom hardware available. Consult the factory to learn more. Hardware components are not sold separately. Custom ha rdware available. Hardware is available in most standard finishes.
vitroamerica.com
CL-355.5*
*Also available with extended spindle inserts in increments of 3/16 up to 1-31/32
*For use with bearing pivot CL-355.5
4.4
CL-355.41
»
CL-340.1
˝
Vision Systems | Hardware E n v i s i o n
Patch Fittings: Transom Center Hung Doors Type BP, A & F
™
WALKING BEAM PIVOT WITH COVER
TOP INSERT WITH PIVOT PIN »
CL-319.3
TOP PIVOT WITH MOUNTING PL ATE »
CL-8062
TOP PIVOT WITH ROD & ANCHOR
CL-325.6
ALUMINUM MO UNTING BRACKE T »
»
G l a s s W a l l s
»
CL-325.3
»
CL-340.5
PATCH COVER
CL-320.6
TRANSOM PATCH FIT TING »
CL-317.35
4.5
Note: Please specify finish for patch plate cover: Clear 101, Black 109, Brass Satin 599, Bronze Polished 601 Satin 600,
Dark Bronze 108, Brass Polished 503, Stainless Steel Polished 701, Satin 700.
vitroamerica.com
Vision Systems | Hardware s l l a W s s a l G
Patch Fittings: Transom and Sidelites for Center Hung Doors Type BP, A & F CORNER PATCH FITTING PATCH COVER
CORNER PATCH FITTING
™
n o i s i v n E
»
CL-317.4
TRANSOM CORNER CONNECTING PATCH FITTING »
»
CL-340.4
TRANSOM CORNER CONNECTING PATCH FITTING COVE R
CL-319.6
»
CL-340.6*
*Suitable for use with transom corner patch fitting 319.6 ACC ESSORI ES FOR CL-323 & CL-319.6 »
TOP INSERT WITH PIVOT PIN
CL-323.5*
»
CL-319.3
*Includes 2 stop inserts and 2 blank inserts.
Patch Fittings: Fin Style Fittings for Transom and Side Panels PIVOT FIN FITTING FOR TRANSOM PANEL »
4.6
CL-317.31*
*Complete with two top inserts CL-319.3 and patch covers.
vitroamerica.com
FIN FITTING FOR TRANSOM PANEL »
*Complete with patch covers.
CL-317.41*
Vision Systems | Hardware E n v i s i o n
PIVOT FIN FITTING FOR TRANSOM & SIDE PANELS »
™
CL-317.41*
G l a s s W a l l s
*Complete with top insert CL-319.3 and patch covers. Be sure to specify left or right hand fitting. [right hand side version shown]
Patch Fittings: Fittings for Transom and Side Panels DOOR STOP FITTI NG AT TRANSOM PANEL »
ACC ESSORI ES FOR CL-323 & CL-319.6
CL-323
»
CL-323.5*
*Includes 2 stop inserts and 2 blank inserts. PATCH COVERS SUITABLE FOR CL-323 »
CONNECTING FIN FITTING FOR GL ASS WALLS
CL-338
»
CL-597*
CONNECTING FITTING FOR GLASS WALLS »
CL-596* *Complete with patch covers.
*Also available in 90˚ or 135˚ consult the factory for special angles.
4.7
vitroamerica.com
Vision Systems | Hardware s l l a W s s a l G
Patch Fittings: Patch Locks PATCH LO CK
™
n o i s i v n E
»
CL-16500
PATCH LO CK »
CL-16300
4.8 Note: A Variety of glass clamp styles and finishes are available upon request. Please consult the factory for more details
vitroamerica.com
Vision Systems | Hardware E n v i s i o n
Glass Clamps:
™
Glass clamps are ideal for use in mall fronts, mezzanines, partitions, railing and windbreaks. These clamps are available in a variety of finishes. The parts shown are designed for 1/2" [12 mm] thick glass. Similar styles are available for use with 1/4" [6 mm] and 3/8" [10mm] thick glass. All clamps are available in: Polished Stainless, Satin Stainless, Polished Brass and Satin Brass. 45° GLASS CL AMP
90°GLASS CL AMP »
CL-MFC26
»
G l a s s W a l l s
CL-MFC22
GLASS CL AMP ASSEMBLY »
CL-MFC14
4.9
vitroamerica.com
s l l a W s s a l G ™
n o i s i v n E
vitroamerica.com
Structural Glass Walls E n v i s i o n
Create a huge architectural presence using structural glass walls. Allow Vitro America™ to help you bring the flexibility of using glass, structural support and creative design together to make a visual statement for any project. Museums, airports and hotels are just a few of the ideal applications for structural glass walls.
™
G l a s s W a l l s
Design Elements Structural glass walls utilize point supported glass fittings to create glass walls by stacking glass panels. •
•
•
Glass stabilizers (fins) may be used to provide structural support. Stainless steel spider fittings provide a total all-glass vision without obstruction and maximum flexibility in design. Most interior glass walls are designed using 1/2 [12mm] thick fully tempered glass. ˝
•
•
Two-sided support requires glass to be supported at head and sill. Three-sided support is designed adding fully tempered glass stabilizers (fins) to add structural support at the jambs.
Two City Place Lobby, Fort Worth, TX | Gideon Toal Architects
Two City Place Lobby, Fort Worth, TX | Gideon Toal Architects
vitroamerica.com
4.10
Structural Glass Walls | Hardware s l l a W s s a l G ™
n o i s i v n E
Spider Fittings Designed for use on Envision™ All-Glass Walls, this elegant hardware style will give projects a more contemporary look while meeting egress requirements. DOUBLE ARM POST MOUNT SPIDER FITTING »
CL – PMS2BS
»
For Use With Glass Up to 13/16" (20mm)
»
Complete With Hardware to Mount to Post or Column
»
»
Atta ches two inline glass panels to a structural center post. Includes 16 x 99.5 mm (3-7/8") stainless steel threaded stud and three matching nuts with washers.
FOUR-WAY ARM POST MOUNT SPI DER FITTING »
CL – PMS2BS
»
For Use With Glass Up to 13/16" (20mm)
»
Complete With Hardware to Mount to Post or Column
»
»
Atta ches two inline glass panels to a structural center post. Includes 16 x 99.5 mm (3-7/8") stainless steel threaded stud and three matching nuts with washers.
4.11 Note: Other spider fitting hardware styles are available. Please consult the factory for more details.
vitroamerica.com
Glass Walls | Example Specifications E n v i s i o n
Section 08400 Envision™ All-Glass Vision Systems
™
G l a s s W a l l s
Part I – General
1.1 Work Included A. B. C. D. E.
Envision™ All-Glass Visions Systems Glazing channels and glazing materials Sealants for butt glazed systems Metal finishes for exposed metal and entry doors Hardware for Envision™ All-Glass Entry Door Systems
1.2 Related Work A. B.
Section 08800 Glass and Glazing Section 08700 Door and Metal Hardware
1.3 Quality Assurance A.
Reference specifications and standards. Comply with standards for glass and metal basic materials as follows i.
Tempered Glass a. b. c. d.
ii.
Flat Glass Marketing Association—FGMA Glazing Manual ANSI Z97.1 American National Standards Institute (ANSI) Consumer Products Safety Commission (CPSC)—CPSC16CFR1201 American Society for Testing Materials (ASTM)—C1048-92 and ASTM 1036-91
Metals a.
National Association of Architectural Metal Manufacturer's (NAAMM)
iii. Metal Finishing a. iv.
Hardware a.
B.
Architectural Aluminum Manufacturer's Association (AAMA) Section 605.2-85 Architectural Hardware Association (AHA)
Comply with all standards noted above and in the event of a conflict, comply with that portion of the specification that will result in the most durable quality and most maintenance free application.
1.4 Submittals A.
Prior to fabrication of any materials, submit the following documents in accordance with Section 01340 for owners’ approval. Do not fabricate any materials until receipt of approved materials documents. B. Shop drawings: indicate component details, materials, finishes, dimensions, fittings, location of hardware and method of anchorage. C. Product data: manufacturer's literature, installation, instructions and product warranties. D. Samples: submit samples of glass for color and thickness and of door rail in specified finish.
4.12
vitroamerica.com
Glass Walls | Example Specifications s l l a W s s a l G
Part II – Products and Systems
2.1 General Comply with the requirements of the reference standards stated herein.
™
n o i s i v n E
2.2 Materials and Accessories A.
Entry Doors i. ii.
Approved Manufacturer: Vitro America™ Glass: 1/2" clear tempered glass, horizontally tempered, tong marks are unacceptable. Warpage shall be in compliance with ANSI Z97.1, ASTM C1048-92 and ASTM 1036-91. iii. Rails and Fittings: Vitro America CL fittings as required by manufacturer. iv. Finish for Rails and Fittings: No. 8 polished stainless steel clad. B.
Sidelites i. ii. iii. iv.
C.
Approved Manufacturer: Vitro America Glass: 1/2" clear tempered glass to match door glass. Rails and Fittings: Vitro America CL fittings as required by manufacturer. Finish for Rails and Fittings to match finish on door rails.
Transoms i. Approved Manufacturer: Vitro America ii. Glass: 1/2" clear tempered glass to match door glass. iii. Rails and Fittings: Vitro America CL fittings as required by manufacturer.
Part III – Execution
3.1 General Comply with all referenced standards. 3.0 Inspection A.
Contractor and sub-contractor are responsible to examine all areas and conditions within which glass doors and sidelites are to be installed. Do not proceed with any work until satisfactory conditions exist for proper installation of all materials. B. Install all materials in accordance with approved shop drawings, samples and manufactures literature.
4.13
vitroamerica.com