百度文库 百度 文库首页 首页
新闻 网页 贴吧 知道 音乐 图片 视频 地图 百科
首页 百度文库 百度文 库
分类
教育文库
精品文库
文库
个人认证
机构合作
文库VIP
意见反馈 意见 反馈 | 下载客 下载客户端 户端 百度首页 | 登录 注册
个 人中心
专业资 专业 资 料 经管营销
EKR 1000 with analogue sensors (1人评价) EKR 1000 with analogue sensors
|
1491人阅 1491 人阅读 读
|
4次下载
|
举报文档
百度一下
下载
0 下载券
评价文档：
Web Guiding Systems Web Viewing Systems BST - web guiding system
EKR 1000 H 1 /41
分享到：
with analogue sensors 加入文库VIP，获得免下载券特权 加入文库VIP， 获得免下载券特权
下载
0 下载券
Operating manual
BST Servo-Technik GmbH Heidsieker Heide 53 33739 Bielefeld Germany
Telefon: ++49(0)5206/ 999 - 0 Fax: ++49(0)5206/ 999 - 999 E-Mail:
[email protected]
Issue: 07.04.1997
EDV Nr.: V3D.002.01.02
BST Servo-Technik GmbH Heidsieker Heide 53 33739 Bielefeld Germany
Telefon: ++49(0)5206/ 999 - 0 Fax: ++49(0)5206/ 999 - 999 E-Mail:
[email protected]
Issue: 07.04.1997
EDV Nr.: V3D.002.01.02
Definition of the symbols in this manual
Attention Comments of this type have to be taken into consideration to protect the operator against mechanical risks
Caution Comments of thiselectrical type have to be absolutely considered to protect the operator against risks
press key
key combination;
between the keys means that these keys
have to be actuated simultaneously
LED ‘OFF’
LED constantly constantly lighted = activated phase
LED blinking
0.0 Table of contents
Table of contents
Chapter 1
Description 1.1 General 1.2 1.3 1.4 1.5 1.6 1.7
General plan Operating elements Signification of the keys on the front panel Signification of the LED’s on the front panel Safety instructions Emissions
Chapter 2
Technical Data 2.1 EKR 1000 2.2 Optical edge sensor IR 2001 2.3 Optical edge sensor IR 2002 2.4 Ultrasonic sensor US 2003 2.5 pneumoelectric transducer ZT 6008
Chapter 3
Transportation/Storage
Chapter 4
Installation 4.1 Requirements to location 4.2 Installation 4.3 Mounting plan
Chapter 5
Start-up 5.1 Requirements for Start-up 5.2 Adjustment of sensors 5.3 Start-up 5.4 5.5 5.6 5.7 5.8 5.9
Basic SET UP Determine desired sense of rotation for manual operation Automatic operation with sensor 1 (and possibly sensor 2) Preparation for actuator ‘electric’ Preparation for actuator ‘hydraulic’ Preparation for ZT 6008
Chapter 6
Operation 6.1 Amplifier
Chapter 7
Remote control
Chapter 8
Trouble shooting
Chapter 9
Maintenance
Chapter 10 De-commissioning
Enclosure:
Web guiding system
* general plan * connecting plan
EDV-No.: V3D.002.01.02
chapter: 0.0
1.0
Please follow the instruction of start-up, maintenance and installation as described in the operating instruction!
1. Description
1.1 General The EKR 1000 system is a microprocessor-controlled amplifier. This amplifier could be used for - web edge guiding (right or left) - center guiding Please contact the producer for any different application. The amplifier has PLC-compatible inputs and also an ‘OK-relay’ with NO and NC contact. Full integration into the machine control system via: - I-O Module Intercon-Module
potential-free in- and outputs for extended PLC messages and commands direct, serial connection for integration of system results,
- PDP-Module
for instantaneous communication with locally peripheral equipment
Notice: Please find the connection plans of the nominated modules at the corresponding operating instructions.
1.2 Components available for connection The general plan (annex 2) indicates the connectable edge sensors and components to the amplifier.
1.3 Operating elements * The amplifier includes all necessary operating elements. Option:
- Remote control by external signals, sensors or keys Attention! External keys will interlock the reverse function keys at the amplifier. - If system locking is desired (e. g., in case of machine stop), this can be achieved by means of external contacts or signals from the PLC.
* Connection of components via separated terminal compartment. Advantage: quick and easy accessibility to the terminal parts. * Indication of web edge position by two LED arrays Advantage: - simple control of the web edge within the measuring range of sensors - simple adjustment of the desired position of the web or edge sensors - variations of web width exceeding via the admissible value
Web guiding system EKR 1000H with analogue sensors
EDV-No.:V3D.002.01.02 Date: 07.04.97
chapter: 1.0 page: 1/4
1.0
1.4 Signification of the keys on the front panel 15 16 17 18 19 10 11 12 13 14
4
5
1 6
2
7
3
8
9
AUTO (1)
= automatic guiding
MAN
(2)
= manual positioning
S-C
(3)
= servo-center of the servo component
←
/ + (4) + MAN + AUTO
= manual shifting = shifting of guiding point to the left
*
+ SET UP + AUTO = increase of gain →
/ - (5) + MAN + AUTO
= manual shifting = shifting of guiding point to the right *
+ SET UP + AUTO = decrease of gain SET UP (6)
AUTO = release of gain with the keys (4) and (5).
+ MAN and/or S-C = SET UP when changing the material ENTER (7)
= storing of the adjustment and end of SET UP functions
„SENSOR LEFT“ (8)
= guiding to the left web edge
„SENSOR RIGHT“ (9)
= guiding to the right web edge
* The shifting of set point via the arrows keys can be locked by a DIL-switch (see also chapter 5, point 5.1).
Web guiding system EKR 1000H with analogue sensors
EDV-No.:V3D.002.01.02 Date: 07.04.97
chapter: 1.0 page: 2/4
阅读已结束，如果下载本文需要使用 0下载券
想免费下载本文？
立即加入VIP
下载
文档免下载券下载特权 全站付费文档8折起 千本精品电子书免费看
