SAIC-Q-1008

SAUDI SAU DI ARAMCO ARAM CO ID/P ID - 18-MAY-05 - REV 0 (Standards (Standards Cutoff - August 2004) 2004) SAIC NUMBE R

SAUDI ARA MCO INSPECTION INSPECTION CHECKL CHECKLIS IS Han d l i n g , St o r ag e & Pr Pr es er v at i o n of of FB FB E St eel Ba B ar s P ROJ ECT TITLE

SA IC-Q-1008 WBS / BI / J O NUMBER

EQUIP ME NT ID NUMBER(S)

E QUIP ME NT DE SCRIP TION

LAYOUT DRAWING NUMBER

REV. NO.

SCHEDULED INSPECTION DATE & TIME

ACTUAL INSPECTION DATE & TIME TIME

DATE AP P ROVE D

QR NUMBER

18-May -05

CIVIL -

CONTRACTOR / SUBCONTRACTOR

E QP T CODE

S Y S TEM ID.

P URCHAS E ORDER NUMBE R

PLANT NO.

EC / PMCC / MCC NO. QUANTITY INSP.

MH's MH's SP ENT

TRAVEL TIME

SAUDI ARAMCO USE ONLY SAUDI ARAMCO TIP NUMBER

S AUDI ARAMCO ACTIVITY NUMBER

SAUDI ARAMCO INSPECTION LEVEL

CONTRACTOR INSPECTION LEVEL

ITEM No.

ACCEPTANCE CRITERIA

A

Handling FBE Steel Bars

REFERENCE

A1

All systems for handling coated steel reinforcing bars shall have padded contact contact areas. (ASTM (AS TM A775, Sec. 15.1 15.1))

09-SAMSS-106 Sec. III.B

A2

All bundled bars shall have padding or suitable banding that shall prevent 09-SAMSS-106 damage damage to to the the coating. coating. (ASTM (AS TM A775, Sec. S ec. 15.1) Sec. III.B

A3

All bundles of bars shall be lifted with a strong back, spreader bar, multiple supports, or a platform bridge to prevent bar-to-bar abrasion from sagging bars bars or bundles. bundles. (ASTM (AS TM A775, Sec. S ec. 15.1)


A4

Coated bars shall not be dropped or dragged along in transporting transporting them from storage to their location on site nor while placing them in their final position in the concrete concrete formw formwork. ork. (ASTM (AS TM A775, A 775, Sec. 15.1)


A5

If coated reinforcing steel is to be stored outdoors for more than two months, they shall be protected from direct sunlight, salt spray and weather. (ASTM (AS TM A775, Sec. 15.2)


B

Storing FBE Steel Bars

B1

The The date ate FBE coat coated ed rein reinfo forc rcin ing g stee steell goes goes out outdoor doors s wit witho hout ut prot protec ecttive ive covering shall be recorded on the identification tags tags on the bundled steel. (ASTM A775, Sec. 15.2)


B2

FBE reinforcing steel bars shall be provided with opaque polyethylene sheeting or other suitable protective covering when they are to be stored outdoors outdoors for longer than than 2 months time. (ASTM (AS TM A775, A 775, Sec. 15.2)


B3

The The cove coverring ing shal shalll be secu securred adeq adequ uatel ately y and and allo allow w air air circ circul ulat atio ion n around the bars to minimize condensation under the covering. (ASTM A775, Sec. 15.2)


B4

Coated steel reinforcing bars shall be stored off the ground on protective cribbing cribbing.. (ASTM (AS TM A775, Sec. 15.3) 15.3)


B5

If circumstances require storing coated steel reinforcing bars outdoors for more than two months, protective storage measures shall be implemented to protect the material from sunlight, salt spray and weather exposure. exposure. (ASTM (AS TM A775, Sec. 15.2) 15.2)


C

P reservatio reservation n of FBE FB E Coating on on Steel Bars

C1

The The maxim aximum amount ount repai epairr to dam damaged aged coat coatin ing g shal shalll not not exce exceed ed 2% within any 300mm length of a bar; This does not include bar ends. (ASTM A775, Sec. 11.1)

Page 1 of 2


WORK PERMIT REQUIRED?

PASS

FA IL

N/A

RE-INSP DATE

SAUDI ARAMCO ID/P ID -18-MAY-05 - REV 0 (Standards Cutoff - August 2004) SAIC NUMBER

SAUDI ARA MCO INSPECTION CHECKLIS Handling, Stor age & Pr eservat ion of FBE Steel Bars

DATE APPROVED

SAIC-Q-1008

PROJ ECT TITLE

WBS / BI / J O NUMBER

ITEM No.

ACCEPTANCE CRITERIA

REFERENCE

C2

All damaged areas of coating shall be repaired with patching material. (ASTM A775, Sec. 11.2)


C3

When immersion-type vibrators are used to consolidate concrete around epoxy-coated steel reinforcing bars, the vibrators should be equipped with rubber or nonmetallic vibrator heads. (ASTM A775, Sec. XI.3.15)


C4

When coated bars are mechanically cut the sheared ends shall be coated with patching material. (ASTM A775, Sec. 11.4)


C5

Protective storage measures shall be implemented to protect materials from sunlight, salt spray and weather exposure. (ASTM A775, Sec. 15.2)


C6

FBE coated reinforcement shall not be flame-cut. ACI-301. Para 3.3.2.9:

QR NUMBER

18-May-05

Civil

CONTRACTOR / SUBCONTRACTOR

PASS

FAIL

N/A

RE-INSP DATE

SAES-Q-001 Sec. 4

REMARKS:

REFERENCE DOCUMENTS:

1- 09-SAMSS-106 -- Epoxy Coating of Steel Reinforcing Bars, 31 December 2000 2- SAES-Q-001 -- Criteria for Design for Design and Construction of Concrete Structures, 29 October 2003

Contractor / Thir d-Party

Saudi A ramco

Construction Representative*

PMT Representative

Work is Complete and Ready for Inspection: Name, Initials and Date:

T&I Witnessed

QC Record Reviewed

Work Verified

T&I Witnessed

QC Record Reviewed

Work Verified

T&I Witnessed

QC Record Reviewed

Work Verified

Name, Initials and Date:

QC Inspector

PID Representative Performed Inspection

Work / Rework May Proceed



QC Supervisor

Proponent and Others Quality Record Approved:

Name, Sign and Date:

Name, Organization, Initials and Date:

*Person Responsible for Completion of Quality Work / Test

Y =YES

Page 2 of 2

N =NO F =FAILED

SAIC-Q-1008

Recommend Documents