HP0-J41

HP HP0-J41

HP0-J41 Implementing HP P2000 StorageWorks Solutionss

Practice Test Version 3.0

HP HP0-J41: Practice Exam QUESTION NO: 1 What are benefits of the P2000 G3 Storage Array compared to the G2 version? (Select two.) A. 6Gb SAS architecture B. 512 snapshot functionality as standard C. drive spin-down capability D. scalability to 149 LFF drives E. scalability to 96 SFF Answer: A,C

QUESTION NO: 2

m o c . s t s e T l a u t c A

What is a benefit of the P2000 G3 FC array? arr ay? A. 8GB cache per controller

B. built-in Remote Snap capability allowing replication over FC C. support for 128 snapshots included in base license D. choice of8Gb/s FC or combo FC/iSCSI controllers Answer: D

QUESTION NO: 3

Which features do HP StorageWorks Enhanced Data Services provide for the MSA P2000 G3 FC array? (Select two.)

A. combo controller hardware B. datadeduplication

C. Continuous Access replication D. embedded SMI-S providers

E. 512 snapshot as a standard feature Answer: A,D

QUESTION NO: 4 Which disk drive technologies are supported in the P2000 G3 FC array? (Select three.) A. Fibre Channel B. LFFProLiant "Pass Any Exam. Any Time." - www.actualtests.com

2

HP HP0-J41: Practice Exam C. SAS D. SAS Midline E. Solid State F. SATA Answer: C,D,F

QUESTION NO: 5 What is the correct definition of the P2000 G3 Remote Snap? A. a synchronous, controller-based replication process based on Volume Shadow Services B. an asynchronous, software-based replication process based on Volume Shadow Services C. a synchronous, controller-based replication process based on snapshot technology


D. an asynchronous, controller-based replication process based on snapshot technology Answer: D

QUESTION NO: 6

Which software products are included in the base license of the P2000 G3 FC array? (Select two.) A. HPStorageWorks MSA2000 Business Copy software B. HPStorageWorks MSA2000 Remote Snap software C. HPStorageWorks MSA2000 Volume Copy software D. HPStorageWorks Storage Mirroring software

E. HPStorageWorks MSA2000 Snapshot software Answer: C,E

QUESTION NO: 7

Which statement is true about P2000 G3 Remote Snap functionality? A. Based on a schedule, the changed blocks are copied, providing operational efficiency. B. During replication, the destination volume always has a consistent copy of the data. C. Remote Snap is a pull operation; the remote site pulls the data from the primary site. D. Remote Snap supports single replication sets. Answer: C

"Pass Any Exam. Any Time." - www.actualtests.com

3

HP HP0-J41: Practice Exam QUESTION NO: 8 Which statement is true about the P2000 G3 FC combo FC/iSCSI controller? A. The Remote Snap feature is only supported to replicate snapshots over FC. B. FC andiSCSI ports may not be used concurrently. C. The combo controller has two4Gb/s FC ports. D. The dual-combo-controller array has four 1-GbEiSCSI ports. Answer: D

QUESTION NO: 9 Which statement is true about the snapshot and Remote Snap functionality of the P2000 G3 array?


A. Snapshot and Remote Snap functionality is included in the base product. B. 128 snapshots can be created without an additional license. C. A temporary license can be used for 90 days.

D. A license is required to expand snapshot limits and to use Remote Snap replication. Answer: D

QUESTION NO: 10

What happens if you cable a 3Gb/s disk drive enclosure before a 6Gb/s enclosure in a mixed storage P2000 G3 configuration?

A. Both disk drive enclosures do not work.

B. The6Gb/s disk drive enclosure performs at 3Gb/s. C. The3Gb/s disk drive enclosure does not work. D. The6Gb disk drive enclosure does not work. Answer: B

QUESTION NO: 11 How often can a LUN be used per volume as its default LUN? A. once B. twice C. three times "Pass Any Exam. Any Time." - www.actualtests.com

4

HP HP0-J41: Practice Exam D. no limit Answer: A

QUESTION NO: 12 Which type of cable is supplied to establish a connection from a terminal emulation to the P2000 G3 MSA CLI? A. Parallel B. Ethernet C. Serial D. USB Answer: D


QUESTION NO: 13 DRAG DROP

Click the Task button. Align the I/O modules with the corresponding P2000 configurations.

Answer:


5

HP HP0-J41: Practice Exam

QUESTION NO: 14


What must be installed on Windows Server 2003 to suppress the Found New Hardware Wizard when the storage system is discovered? A. MPIO DSM driver B. P2000Storport driver

C. SCSI Enclosure Services driver D. P2000 VSS provider Answer: C

QUESTION NO: 15

How can you stop the vdisk expansion process? A. Disconnect the hosts. B. Delete thevdisk. C. Delete all volumes with snapshots. D. Unpresent the volumes to the hosts. Answer: B


6

HP HP0-J41: Practice Exam QUESTION NO: 16 What happens if you disable controller write-back caching on a dual-controller active-active P2000 system? A. Only sequential writes are written to disk. B. Write-through caching is enabled. C. Random reads cause cache overflow. D. Cache enters mirroring mode. Answer: B

QUESTION NO: 17


What is the default IP address of the controller module A management port on a P2000 G3 MSA system? A. 10.0.0.1 B. 10.0.0.2 C. 127.0.0.1 D. 192.168.1.2 Answer: B

QUESTION NO: 18

What prevents FC and FC/iSCSI combo controllers from being mixed in the same P2000 chassis? A. The configuration is not supported by the firmware.

B. The shared PCI express bus on the backplane might cause confusion. C. The controller pins are differently assigned and would cause conflicts. D. The controllers are designed for different voltages. Answer: A

QUESTION NO: 19 What does a LUN identify? A. a mapped snapshot to a host


7

HP HP0-J41: Practice Exam B. a replication set to recovery software C. a mapped volume to a host D. a disk to a controller Answer: C

QUESTION NO: 20 Which factor determines the logical capacity of all physical disks in a vdisk? A. chunk size B. capacity of the largest disk C. capacity of the smallest disk D. RAID level Answer: C

QUESTION NO: 21


During the implementation of a P2000 G3 solution, you notice that a volume is masked. What is the cause?

A. The mapping specifies universal access.

B. The mapping specifies read-write access. C. The mapping specifies read-only access. D. The mapping specifies no access. Answer: D

QUESTION NO: 22

Which prerequisite must be met to configure Remote Snap on P2000 G3 MSA systems? A. Both systems, local and remote, must have access to the same volume. B. The local system requires the VSS provider and assignment of the remote system as VSS client. C. Both systems, local and remote, must have an active license installed. D. A dedicated point-to-point fiber channel link must exist between the local and the remote system. Answer: C


8


QUESTION NO: 23 Before creating or scheduling a volume copy, how much free space should be available for the snap pool? A. 10% of the volume size or 5GB, whichever is larger B. 20% of the volume size or 10GB, whichever is larger C. 40% of the volume size or 20GB, whichever is larger D. 50% of the volume size or 15GB, whichever is larger Answer: B

QUESTION NO: 24


What must you do before you remove local replication disks for transport to the remote location? A. Spin down the disks.

B. Clear the system cache.

C. Remove all host connections. D. Detach the disks. Answer: D

QUESTION NO: 25

What is the recommended maximum number of volumes per controller when the Maximum option is selected for read-ahead caching? A. 1 B. 2 C. 3 D. 4 Answer: B

QUESTION NO: 26 Which cabling scheme should be used in a P2000 configuration for an MSA2000 3Gb/s drive enclosure behind a D2700 enclosure?


9

HP HP0-J41: Practice Exam A. cross-link B. bypass C. point-to-point D. straight-through Answer: D

QUESTION NO: 27 What should run on servers that share access to the same P2000 G3 MSA storage LUN to preserve data integrity? A. virtualization software B. LUN provisioning tools C. MPIO DSM D. cluster software Answer: D



Click the Task button. Arrange the P2000 G3 MSA power-on procedure in the correct sequence.

Answer:


10


QUESTION NO: 29


Which advanced configuration option enables you to update the firmware of both controllers simultaneously on a dual-controller P2000 G3 system? A. Partner Firmware Update B. Other Controller Update

C. Online Controller Update D. Dual Controller Update Answer: A

QUESTION NO: 30

Which controller cache policy is recommended for applications that cause large sequential writes? A. write-through B. write-back C. adaptive write-ahead

D. mirrored sequential-write Answer: A

QUESTION NO: 31 A customer wants to implement a P2000 G3 FC for writing large amounts of sequential data. Which disk array configuration will perform the best, while maintaining fault tolerance?


11

HP HP0-J41: Practice Exam A. RAID 1 B. RAID 5 C. RAID 6 D. RAID 10 Answer: B

QUESTION NO: 32 Click the Exhibit button.


Which transceiver type and technology does the P2000 G3 include by default? A. SC SFP B. LC SFP C. LC GBIC D. SC GBIC Answer: B

QUESTION NO: 33

On the P2000 combo iSCSI/FC controller, how do iSCSI and Fibre Channel ports differ? (Select two.)

A. TheiSCSI ports require an IP address. B. FC ports require a Logical Unit Number. C. TheiSCSI ports are 10Gb/s while the FC ports are 8Gb/s. D. The FC ports are 8Gb/s while the iSCSI ports are 1Gb/s. E. The controller has moreiSCSI ports than FC ports. Answer: A,D

QUESTION NO: 34 "Pass Any Exam. Any Time." - www.actualtests.com

12

HP HP0-J41: Practice Exam What is considered an iSCSI initiator in a P2000 G3 MSA implementation? A. volumes B. Ethernet switches C. combo FC/iSCSI controllers D. server hosts Answer: D

QUESTION NO: 35 What is an accurate description of the LUN masking used in the P2000 storage array? A. volume access limited to specified hosts


B. default mapping used when creating a LUN C. LUN accessibility for all hosts

D. default when explicit mappings are deleted Answer: A

QUESTION NO: 36

When implementing a P2000 G3 solution with a single 8Gb/s FC controller, what are advantages of a fabric topology over direct connect? A. supports multiple paths

B. provides storage access fromiSCSI adapters C. supports more storage

D. provides storage access for more hosts Answer: D

QUESTION NO: 37 What is the maximum number of supported vdisks per controller on P2000 G3 arrays? A. 8 B. 16 C. 32 D. 64 Answer: B "Pass Any Exam. Any Time." - www.actualtests.com

13


QUESTION NO: 38 Which entity must be created for Remote Snap replication in a P2000 G3 environment? A. data replication group B. mirror set C. replication set D. snap group Answer: C



Click the Task button. Label the snapshot objects.

Answer:


14


QUESTION NO: 40


Which user roles are available for a P2000 G3 user? (Select two.) A. Advanced B. Manage C. Standard D. Monitor E. Diagnostic Answer: B,D

QUESTION NO: 41 Which management interfaces can be used to integrate P2000 G3 arrays in HP Systems Insight Manager for proactive maintenance with HP Insight Remote Support Advanced? (Select two.) A. SNMP "Pass Any Exam. Any Time." - www.actualtests.com

15

HP HP0-J41: Practice Exam B. WMI C. WBEM D. SMI-S E. DMI Answer: A,D

QUESTION NO: 42 Which type of volume replication can you define in Replication Setup Wizard in a P2000 G3 environment? A. volume replication on a host agent basis B. volume replication on the local system or to a remote system


C. volume replication on the local system but not to a remote system D. volume replication to a remote system exclusively Answer: B

QUESTION NO: 43

Which components of the P2000 G3 array are mandatory Customer Self Repair parts? (Select three.) A. array enclosure B. disk enclosures C. power supplies D. I/O modules E. controller boards F. hard drives Answer: C,E,F

QUESTION NO: 44 What must you do before you update expansion module firmware on a single-controller P2000 G3 system? A. Stop I/O to allvdisks. B. Set the failover policy. C. Segregate the module from the controller. "Pass Any Exam. Any Time." - www.actualtests.com

16

HP HP0-J41: Practice Exam D. Update the enclosure management processor (EMP) firmware first. Answer: A

QUESTION NO: 45 How can you update the embedded SMI-S provider on a customer's P2000 G3 controller? A. Update the controller firmware. B. Log in and download the update via TFTP. C. Update the enclosure firmware. D. Download the update directly from the HP repository site. Answer: A

QUESTION NO: 46 Click the Exhibit button.


The SMU displays the icon shown in the exhibit at logon. What does it indicate? A. No storage controller is configured.

B. The SMU can not communicate with the management controller.

C. The SMU can communicate with the storage controller but can not communicate with the management controller.

D. SMU can communicate with the management controller, whichcan not communicate with the storage controller. Answer: D

QUESTION NO: 47 Which service can be used to provide customers with e-mail updates on the latest product enhancements, newest versions of drivers, and firmware documentation updates, for HP Storage and other HP products?


17

HP HP0-J41: Practice Exam A. SPOCK B. HP Product Bulletin C. SAN Visibility D. subscriber's choice website Answer: D

QUESTION NO: 48 Where in the SMU can you see how many events of each severity level occurred in the P2000 G3 system? A. Event Notification panel B. System Status panel C. Enclosure Properties D. Configuration view Answer: B

QUESTION NO: 49


What is required to perform a non-disruptive controller firmware update on a P2000 G3 array? A. embedded SMI-S provider B. multi-pathing software

C. a comboiSCSI/FC controller D. dual controllers Answer: D

QUESTION NO: 50

For which P2000 G3 components can the firmware be updated from the SMU? (Select three.) A. I/O module B. controller module C. Fibre Channel HBA D. expansion module E. disk drives F. enclosure management module


18

HP HP0-J41: Practice Exam Answer: B,D,E

QUESTION NO: 51 When you add an expansion module to a P2000 G3 MSA, which HP recommended action should you take? A. Configure the storage before you cable the expansion module to the controllers. B. Update the SMI-S embedded processor firmware before you configure the module. C. Install the Storage Management Utility on the new module. D. Set all enclosure management processors to the same firmware level. Answer: D

QUESTION NO: 52


What is the most cost-efficient P2000 G3 storage solution? A. dual8Gb/s FC controllers with Enterprise-class SAS B. single8Gb/s FC controller with SAS Midline

C. dual FC direct-attached controllers with SATA D. single combo FC/iSCSI controller with SATA Answer: D

QUESTION NO: 53

Which P2000 G3 feature requires an additional license and includes protection against data loss in the local SAN area? A. Volume Copy software

B. Drive SpinDown (DSD) software C. Remote Snap software D. Continuous Access software Answer: C

QUESTION NO: 54 DRAG DROP Click the Task button. A customer with pre-existing storage hardware intends to upgrade their environment with new P2000 G3 technology. Indicate which components can be combined with "Pass Any Exam. Any Time." - www.actualtests.com

19

HP HP0-J41: Practice Exam the P2000 G3 in a single solution, and what the data throughput speed will be.

Answer:



20


QUESTION NO: 55 A customer upgrades a Fibre Channel MSA 2000 environment to a P2000 G3 solution with dual combo FC/iSCSI controllers. They keep as much of the old equipment as possible. What is a primary consideration when setting up the bill of materials? A. the distance between the existing disk drive enclosures and the controller enclosure B. the weight of the additional equipment (a raised floor supports a maximum of 2200lbs/1000kg per square meter) C. the cabling requirements (CAT 6 or higher) for potentialiSCSI interconnections D. the hop count from the controller enclosure to the farthestiSCSI-connected host Answer: A

QUESTION NO: 56


Which customer environmental information is required for the remote management of a P2000 G3 MSA solution? A. network configuration

B. available mini-SAS cables

C. SMI-S proxy provider on a local server D. SAN switch configuration Answer: A

QUESTION NO: 57

Which warranty option is generally considered part of the standard warranty? A. 5 years parts exchange B. enclosures carry their own warranty C. 4-hour response time D. same day response Answer: B

QUESTION NO: 58


21

HP HP0-J41: Practice Exam What can be used to examine the integrity of existing storage and to estimate expected performance? (Select two.) A. HPStorageWorks P2000 G3 MSA SMU Reference Guide B. HPStorageWorks P2000 G3 MSA System Cable Configuration Guide C. HPStorageWorks P2000 G3 MSA CLI Reference Guide D. HPStorageWorks P2000 G3 MSA System FC/iSCSI User Guide E. HP SAN Design Reference Guide Answer: B,D

QUESTION NO: 59 Which types of fault recovery does the Remote Snap software provide? (Select two.)


A. temporary communication failure B. host failure C. global spare failure D. controller failure E. RAID disk failure Answer: A,D

QUESTION NO: 60

Which warranty option is a warranty upgrade option for the P2000 G3 MSA? A. next-business-day delivery

B. hard drives carry own warranty C. 3-year parts exchange D. 6-hour call-to-repair Answer: D


22

HP0-J41

Recommend Documents