Old document on how to make colloidial silver at home
How to Make Your Own Plasma CutterDescripción completa
A book about cold process of soap making.Deskripsi lengkap
Descripción: Perfume
Full description
informationFull description
Full description
Descripción completa
Full description
how to make knife by your ownDescrição completa
how to make knife by your own
Description complète
The 10 States reign with the beast for one particular hour. The daily life span of the beast is seven several years.Only a hundred and forty four,000 of the sons of Israel will escape the wr…Full description
Full description
How To Make Your Own Sculpting ToolsDescrição completa
How to make your own subliminal record
Deskripsi lengkap
Full description
Full description
How To Make Your Own Tubular Lock Pick By L0ckp1cker
1. Make sure you have the following materials available:
2. Make sure you have the following tools available: - Pliers (to cut and bend) - cutting wheel (dremel) - grinder
3. First start by cutting the extension on top of the key off so the key can be removed and inserted at any time:
4. Next follow the already existing pin cuts and cut them straight to the top of the key:
5. The result is a (in this case not so beautiful ☺) key which won’t press on any pins anymore when inserted in the lock.
6. Now wind the rubbers band around the key so that the key can still be inserted into the lock:
7. Cut the split pins into lengths of 2cm (you’ll need one for every cut you’ve just made):
8. Bend the split pins into an L shape:
9. Put all the split pins under the rubber bands into the cuts in the key:
10. Your pick is done now.
Just put the pick in the lock and press down the pins one by one. You can now turn the key and open the lock: