To meet customers' requirements for high quality networks, LTE trial networks must be optimized during and after project implementation. Radio frequency (RF) optimization is necessary in the entire...
LTE Network OptimizationFull description
LTE OptimizationFull description
Full description
Full description
selamat membaca
LTEFull description
Description complète
Usage
Feature
Throughput
MIMO behavior
Accessability
PRACH
Accessibility
Paging
Drops
QoS Parameters
CELL SELECTION AND RESELECTION
Paging Performance
Radio Bearer Failure
QoS Parameters
Retainability
I-RAT
Throughput
Scheduling Strategy
Parameter
Impact / Usage
noOfTxAntennas
The number of antennas that can be used for uplink beamforming/MIMO A parameter value of 0 means that the available configured resources will be used.
Rach seq represent Zdef Chu with recommended 10 distance for 15 KM cells (837) Cell range select the RACCH preamble format
Maximum allowed number of Paging Records included in one RRC paging message that is, the maximum UEs that can be paged per PO. Indicates the number of radio frames in the paging cycle. Used to derive the number of subframes used for paging within each paging cycle
Determines the maximum t ime a received paging message may be retained
N310 Out of sync indications received, initiate T310 till expiry no N311 in-sync indications
RRC Connection Reestablishment timer before it goes to RRC_IDLE