EEM EEM Elec El ectr tric ic Ma Mach chin ines es
THE TRAINING SYSTEM, ELECTRIC MACHINES
2 T N E / 1 T N E
G N I R E E N I G N E E V I R D L A I R T S U D N I ; S E V I R D R E T R E V N O C C I T A T S
F / M E E
o r h n 2 . c o i 5 n y t S a M s E s i E n i n a M
S R E M R O F S N A R T D N A S E N I H C A M C I R T C E L E
3 . 5 M E E / 1 . 5 M E E s e u s o s a n e 4 h o n p r i M h h E e c c E e r n a M h y T s A
d e t a n h o t i L o P u g n i g m i n n i S i t n m r a r o e e d t p d e O D A
/ A n s M o e i n A t i n a l h y c D u a m M n i S o k d d r o d a W o A L
n o , g i n s i t c t a i s a i t r s i n r e o e p t o r c e h c a r h n t a y h g s c n s n c i i i n i a m m a r M , n e t t y n D e i D o p
The progressive development in all areas of technology has resulted in increasing demands for highly skilled specialists, technicians and engineers. This applies in particular to the subject area of drive engineering. The world of today is inconceivable without the use of controllable electric drive systems. Stateof-the-art drive systems are based on the application of electronics in conjunction with electric machines.
e s a h p e s e r r h e T m / r o f e s l g n n a i r S T •
s n e n o i g h n c a i d M n c i f - i r t t l c u e a l F E •
Here is where the electric machines training system is of utmost significance. In addition to straightfor-
G N I R E E N I G N E L A C I R T C E L E F O S L A T N E M A D N U F
s e s n e - n i h n i c y h a S c e a e M s M s a s a e c h u h n p o p a e n e t c e o r e u r l r h h h e T c T R • • , g r g n n i o i e t g t o g n a n a r r a m h a o h t c p e c o g e e e r l s a l c o e o o s m l p d g g e p w n , , n r i r a r t i n r o r l o i h d h t t u t n p q o a o i i i l S M D M w w S • •
•
•
s e n i 3 h c M E a M E C A
g n i t r r r o r o o t a g g t t t o n o o s n i i m m m h t h d a t n l n t i r r i i l e a i o w w o w e t s o r s r p i r r p e l o c o o a u t a v l i i i p t d p t l f o o n e i p n a U R M a c M b S • • • • •
s e n i 2 h c M E a M E C D
d n u o d d w n n d u u n o o e e e w n w n u o n i i t h s h p i h n c i e c c m a u a r a o h e S m S m C m • • •
, g n g i t a n i t t s e a r T d a t , e S s n c i , i t h n s c o i i t r a c e m e t n c a e n r h o a t h C C
ward connection, the parameters and characteristics specific to particular machines, are in the foreground. By using standard industrial specifications, the knowledge gained in the laboratory can easily be applied to practical, everyday industrial situations. The machines and control units are designed so that they can be integrated into state-of-the-art circuits and drive systems. The modular construction ensures that the exercises remain adaptable for years to come.
OVERVIEW OF THE ADVANTAGES OF THE LUCAS-NÜLLE SYSTEM
S E N I H C A M C I R T C E L E M E E
OPERATING SAFETY
THE INTERIOR OF THE MACHINES
All connections are made with safety-protected, shockproof connection cables and sockets. The explicit DIN and IEC standard identification of the connections, and their location, ensure a hi gh degree of circuit safety. All rotating parts are protected by suitable guards. The machines are protected against t hermal overload by temperature sensors.
All Lucas-Nülle machines with slip-rings or brushes incorporate a transparent plastic window providing direct observation of the component parts that are typical to particular machines.
OPTIMUM HANDLING The machines within one power category all have the same shaft height and are mounted on an anti-vibration base-plate. This ensures a straightforward, stabile coupling of machines and subsidiary equipment (e.g. servo brake, gears), using rubber coupling sleeves. These sleeves produce a coupling without any backlash and ensure smooth running with a maximum transfer of power.
COMPETENT, SPECIALIST LITERATURE An important ingredient of the Lucas-Nülle training systems is the comprehensive exercise literature, written by experienced trainers and professional specialists. All important details necessary for completing the exercises, are included in a straightforward, understandable manner manner..
PRACTICE-ORIENTED CHARACTERISTICS The responses and characteristics correspond to those of machines having a considerably higher power rating. 3
MAC HI N E TE ST-BEN CH, SERVO DR I VE / BR AKE S YSTEM
MACHI NE TEST-BENC H, SERVO D RI VE /B R AKE SYS TE M
The LN servo drive and brake system is a universal, highly dynamic test system for examining all electric machines and drives. The system consists of a didactically-prepared control unit and an asynchronous servo machine with integrated resolver. State-of-the-art servo and microcontroller techniques provide a very high degree of flexibility and ease of operating. Optimised systems are available for each of the power categories 300 W and 1 kW. The LN drive and brake system operates in all four quadrants, i.e. it can drive
THE COMPONENTS
and brake machines in all operating states. The ongoing speed and torque is determined and displayed in all operating areas. The integrated isolating amplifier also provides the facility of recording the current and voltage of the machine under test.
In addition to the pure drive and braking, the following 6 pre-programmed practical models of work machines can be loaded and their parameters adjusted:
CONTROL UNIT The digital control unit for the servo drive/servo brake is didactically constructed and designed for the classical exercises without a PC as well as for connection to a PC. The unit is operated via selfexplanatory keys. Speed and torque are indicated on
• C AL AL EN EN DE DE R
Further features include: • Integr Integrated ated isolating isolating amplifier amplifier for measuring measuring the current and voltage of the motor under test • Monitorin Monitoring g the temperature temperature of the motor under under test • Analo Analog g outputs for for speed speed and torque torque • Opt Option ional al interfac interfaces es (RS232, Profibus DP, Interbus S); integrated CAN-Bus • I/O terminal terminal for for servo applicat applications ions • Conne Connection ction of the asynchron asynchronous ous servo via polaritypolarityprotected multi-way connector
M~n P ~ n2 M,P M
P n Calender with viscous friction, eddy-current brake, paper processing machines
Photographs by Lenze GmbH
• LIFT LIFTING ING DRI DRIVE VE
• FA FAN/ N/PU PUMP MP
M = constant
M~n
P~n
P ~ n3
M,P
• WINDI WINDING NG MACHINE MACHINE DRIV DRIVE E
1 kW category
320...528 V, 45...65 Hz 4.8 kVA 7.0 A 10.5 A 297x 460x 210mm (H x W x D) D) 10 kg
320...528 V, 45...65 Hz 9 kVA 13.0 A 19.5 A 297 x 460 x 320 mm (H x W x D) 15 kg
Order No.:
SO3636-6R
SE2663-6D
M~ P = constant
M,P
P
M
P
M n
n Pumps and fans, centrifuges, mixers
n Winder, facing lathes, rotary cutting machines
S E N I H C A M C I R T C E L E M E E
BRAKE
M,P
P
Hoisting gear, conveyor belt, processing machine with
0.3 kW category Supply voltage*: Output power: Nominal current: Pulsed current: Dimensions: Weight:
*for other supply voltages SE2663-2B is required
1 n
2
breakaway torque M
large-scale analog instruments with a centre zero. Together with the 4-quadrant monitor, trends in the results can be recognised. The digital LC-Display and Operator section facilitates an exact read-out of the values and provides adjustments for the parameters.
The asynchronous servo machine has sufficient torque reserves to reliably brake, drive or hold at standstill, machines and drives in all four quadrants. Coupling to the brake is by way of a toothed clutch. The integrated resolver generates a highly accurate, absolute value of the rotor position and speed. The temperature of the motor is continuously monitored via a KTY-temperature KTY-t emperature sensor. The system is drift-free and requires no calibration.
re-shaping work, planing machine
• I N E R TI A W H E E L
• P I S TO N C O M P R E S S O R
Thus in the laboratory, conditions for examination can be created that otherwise are only possible in practice. Optimum support in experimenting, is supplied by 4
didactic software packages. These provide a straightforward and easy operation together with a visual display of the measured results, via the serial interface.
0.3 kW category
1 kW category
Torque: Nominal power: Nominal current: Nominal speed: Maximum speed: Resolver resolution: Dimensions: Weight:
MN: 4.6 Nm; Mmax: 11.7 Nm 1.7 kW 4.4 A 4050 rpm 8000 rpm 65536 pulses/revolut pulses/revolution ion 340 x 210 x 210 mm (W x H x D) 7.5 kg
MN: 10.8 Nm; Mmax: 27 Nm 3.9 kW 9.1 A 3455 rpm 8000 rpm 65536 pulses/revolut pulses/revolution ion 500 x 220 x 250 mm (W x H x D) 10.5 kg
Order No.:
SE2663-6A
SE2663-6E 5
MAC HI N E TE ST-BEN CH, SERVO DR I VE / BR AKE S YSTEM
MACHI NE TEST-BENC H, SERVO D RI VE /B R AKE SYS TE M
The LN servo drive and brake system is a universal, highly dynamic test system for examining all electric machines and drives. The system consists of a didactically-prepared control unit and an asynchronous servo machine with integrated resolver. State-of-the-art servo and microcontroller techniques provide a very high degree of flexibility and ease of operating. Optimised systems are available for each of the power categories 300 W and 1 kW. The LN drive and brake system operates in all four quadrants, i.e. it can drive
THE COMPONENTS
and brake machines in all operating states. The ongoing speed and torque is determined and displayed in all operating areas. The integrated isolating amplifier also provides the facility of recording the current and voltage of the machine under test.
In addition to the pure drive and braking, the following 6 pre-programmed practical models of work machines can be loaded and their parameters adjusted:
CONTROL UNIT The digital control unit for the servo drive/servo brake is didactically constructed and designed for the classical exercises without a PC as well as for connection to a PC. The unit is operated via selfexplanatory keys. Speed and torque are indicated on
• C AL AL EN EN DE DE R
Further features include: • Integr Integrated ated isolating isolating amplifier amplifier for measuring measuring the current and voltage of the motor under test • Monitorin Monitoring g the temperature temperature of the motor under under test • Analo Analog g outputs for for speed speed and torque torque • Opt Option ional al interfac interfaces es (RS232, Profibus DP, Interbus S); integrated CAN-Bus • I/O terminal terminal for for servo applicat applications ions • Conne Connection ction of the asynchron asynchronous ous servo via polaritypolarityprotected multi-way connector
M~n P ~ n2 M,P M
P n Calender with viscous friction, eddy-current brake, paper processing machines
Photographs by Lenze GmbH
• LIFT LIFTING ING DRI DRIVE VE
• FA FAN/ N/PU PUMP MP
M = constant
M ~ n2
P~n
P ~ n3
M,P
• WINDI WINDING NG MACHINE MACHINE DRIV DRIVE E
breakaway torque M
P
M
P M n Hoisting gear, conveyor belt, processing machine with
n
n Winder, facing lathes,
Pumps and fans, centrifuges, mixers
1 kW category
320...528 V, 45...65 Hz 4.8 kVA 7.0 A 10.5 A 297x 460x 210mm (H x W x D) D) 10 kg
320...528 V, 45...65 Hz 9 kVA 13.0 A 19.5 A 297 x 460 x 320 mm (H x W x D) 15 kg
Order No.:
SO3636-6R
SE2663-6D
rotary cutting machines
S E N I H C A M C I R T C E L E M E E
BRAKE
M,P
P
0.3 kW category Supply voltage*: Output power: Nominal current: Pulsed current: Dimensions: Weight:
*for other supply voltages SE2663-2B is required
M ~ 1n P = constant
M,P
large-scale analog instruments with a centre zero. Together with the 4-quadrant monitor, trends in the results can be recognised. The digital LC-Display and Operator section facilitates an exact read-out of the values and provides adjustments for the parameters.
The asynchronous servo machine has sufficient torque reserves to reliably brake, drive or hold at standstill, machines and drives in all four quadrants. Coupling to the brake is by way of a toothed clutch. The integrated resolver generates a highly accurate, absolute value of the rotor position and speed. The temperature of the motor is continuously monitored via a KTY-temperature KTY-t emperature sensor. The system is drift-free and requires no calibration.
re-shaping work, planing machine
• I N E R TI A W H E E L
• P I S TO N C O M P R E S S O R
Thus in the laboratory, conditions for examination can be created that otherwise are only possible in practice. Optimum support in experimenting, is supplied by
didactic software packages. These provide a straightforward and easy operation together with a visual display of the measured results, via the serial interface.
0.3 kW category
1 kW category
Torque: Nominal power: Nominal current: Nominal speed: Maximum speed: Resolver resolution: Dimensions: Weight:
MN: 4.6 Nm; Mmax: 11.7 Nm 1.7 kW 4.4 A 4050 rpm 8000 rpm 65536 pulses/revolut pulses/revolution ion 340 x 210 x 210 mm (W x H x D) 7.5 kg
MN: 10.8 Nm; Mmax: 27 Nm 3.9 kW 9.1 A 3455 rpm 8000 rpm 65536 pulses/revolut pulses/revolution ion 500 x 220 x 250 mm (W x H x D) 10.5 kg
Order No.:
SE2663-6A
SE2663-6E
4
5
SOFTWARE FOR THE MACHINE TEST STAND SERVO DRIVE / BRAKE SYSTEM
SOFTWARE FOR THE MACHINE TEST STAND SERVO DRIVE / BRAKE SYSTEM
Five different didactic software packages allow the exercises to be completed with PC support. The software packages are compiled specially for use with the servo drive and brake system and are integrated in the Windows screen interface, providing all the advantages of modern software. The packages incorporate export and print functions
SOFTWARE DynAMA
so that the measured values and graphics can be used in other programs such as for example, MS Excel. All software packages have an extensive contextual online Help function and are available as 32-bit versions (Windows 95 or higher). Connection to the PC serial interface is made via an interface module.
SOFTWARE ActiveDCMA
ActiveDCMA is a program for recording the characteristics of DC machines. • Measurement, calculation and graphic graphic display of mechanical and electrical variables (speed, torque, mechanical power, current, voltage, efficiency)
• Simultaneous display of measured and calculated calculated values (e.g. direct display of the efficiency) • Defining limit limit values for speed or torque to avoid inadmissible loading of the machine under test • Measur Measurement ement of armature armature voltage, voltage, armature armature current (as rectified mean values) • Speed Speed-- or torq torque-co ue-contro ntrolled lled operation operation • Operat Operation ion in all all four quadra quadrants nts (showing the generator torque) • Display of the characteristics from several exercises to enable parameter changes to be seen • Oscilloscope function for displaying displaying the waveforms of voltage, current and efficiency
SOFTWARE SimuLoad
Order No.: SO6006-4C
Order No.: SO6001-2Q
With the SimuLoad program, the static working (or operating) point can be determined. Six different loading conditions (work machines) are available, each incorporating the facilities for adjustment and parameter modification. • Deter Determini mining ng the workin working g point • Stab Stabile ile worki working ng point • Speed Speed-tor -torque que char charts ts • Supe Superimpo rimpositi sition on of curves curves • Opera Operation tion in in all four four quadrants quadrants
Order No.: SO6001-2N
SOFTWARE ActiveASMA
SOFTWARE PosiDrive • • • • •
ActiveASMA is a program for recording the characteristics of asynchronous, synchronous and AC machines. • Measurement, calculation and graphic graphic display of mechanical and electrical variables (speed, torque, mechanical power, current, voltage, active-,
With the DynAMA program, dynamic processes such as starting or braking responses of electric machines can be examined and recorded. The measured values
are recorded as a function of time. • Adjust Adjustments ments and and parameter parameter changes for for 6 different load machines (inertia wheel, fan, calender, lifting drive, compressor, winding machine drive) • Measurement, calculation and graphic graphic display display of mechanical and electrical variables (speed, torque, mechanical power, current, voltage) • Display with with different timebases and and trigger conditions • Simultan Simultaneous eous display display of measured measured and calculated calculated values (e.g. direct display of the mechanical power) • Opera Operation tion in in all four four quadrants quadrants
• •
apparent-, reactive powers, efficiency, power factor) Simultaneous display of measured and calculated calculated values (e.g. direct display of the efficiency) Measuremen Measu rementt of current and and voltage voltage (as RMS value, even with non-sinusoi non-sinusoidal dal variables) Speed-- or torq Speed torque-co ue-contro ntrolled lled operation operation Defining limit limit values values for speed or torque to to avoid inadmissible loading of the machine under test Operation in all four quadrants (showing the generator torque) Display of the the characteristics characteristics from from several exerexercises to enable parameter changes to be seen Oscilloscope function for displaying displaying the waveforms of voltage, current and efficiency
Order No.: SO6006-4A
PosiDrive is a program for examining a displacement and positioning system. • Defining Setpoint positions positions with with freely freely selectable values for the ramp time, maximum speed, maximum torque and delay (waiting time) • Single Single-step -step processing processing or continuous continuous running running to the specified positions • Examining the effects of the controller controller parameparameters on the positioning accuracy • Graphic display display of the the values of position, position, torque torque and speed, in a timing chart
S E N I H C A M C I R T C E L E M E E
Order No.: SO6006-2J
INTERFACE MODULE
Attachable field bus module for coupling between PC, frequency converter and servo drive amplifier. • Connection sub-assembly for RS232/RS RS232/RS485 485 • Potential isolation to control/power control/power section • Suita Suitable ble interface interface cable cable (LM9028) (LM9028)
Order No.: LM8925 + LM9028
6
7
SOFTWARE FOR THE MACHINE TEST STAND SERVO DRIVE / BRAKE SYSTEM
SOFTWARE FOR THE MACHINE TEST STAND SERVO DRIVE / BRAKE SYSTEM
Five different didactic software packages allow the exercises to be completed with PC support. The software packages are compiled specially for use with the servo drive and brake system and are integrated in the Windows screen interface, providing all the advantages of modern software. The packages incorporate export and print functions
SOFTWARE DynAMA
so that the measured values and graphics can be used in other programs such as for example, MS Excel. All software packages have an extensive contextual online Help function and are available as 32-bit versions (Windows 95 or higher). Connection to the PC serial interface is made via an interface module.
SOFTWARE ActiveDCMA
ActiveDCMA is a program for recording the characteristics of DC machines. • Measurement, calculation and graphic graphic display of mechanical and electrical variables (speed, torque, mechanical power, current, voltage, efficiency)
• Simultaneous display of measured and calculated calculated values (e.g. direct display of the efficiency) • Defining limit limit values for speed or torque to avoid inadmissible loading of the machine under test • Measur Measurement ement of armature armature voltage, voltage, armature armature current (as rectified mean values) • Speed Speed-- or torq torque-co ue-contro ntrolled lled operation operation • Operat Operation ion in all all four quadra quadrants nts (showing the generator torque) • Display of the characteristics from several exercises to enable parameter changes to be seen • Oscilloscope function for displaying displaying the waveforms of voltage, current and efficiency
SOFTWARE SimuLoad
Order No.: SO6006-4C
Order No.: SO6001-2Q
With the SimuLoad program, the static working (or operating) point can be determined. Six different loading conditions (work machines) are available, each incorporating the facilities for adjustment and parameter modification. • Deter Determini mining ng the workin working g point • Stab Stabile ile worki working ng point • Speed Speed-tor -torque que char charts ts • Supe Superimpo rimpositi sition on of curves curves • Opera Operation tion in in all four four quadrants quadrants
S E N I H C A M C I R T C E L E
Order No.: SO6001-2N
SOFTWARE ActiveASMA
SOFTWARE PosiDrive • • • • •
ActiveASMA is a program for recording the characteristics of asynchronous, synchronous and AC machines. • Measurement, calculation and graphic graphic display of mechanical and electrical variables (speed, torque, mechanical power, current, voltage, active-,
With the DynAMA program, dynamic processes such as starting or braking responses of electric machines can be examined and recorded. The measured values
are recorded as a function of time. • Adjust Adjustments ments and and parameter parameter changes for for 6 different load machines (inertia wheel, fan, calender, lifting drive, compressor, winding machine drive) • Measurement, calculation and graphic graphic display display of mechanical and electrical variables (speed, torque, mechanical power, current, voltage) • Display with with different timebases and and trigger conditions • Simultan Simultaneous eous display display of measured measured and calculated calculated values (e.g. direct display of the mechanical power) • Opera Operation tion in in all four four quadrants quadrants
• •
apparent-, reactive powers, efficiency, power factor) Simultaneous display of measured and calculated calculated values (e.g. direct display of the efficiency) Measuremen Measu rementt of current and and voltage voltage (as RMS value, even with non-sinusoi non-sinusoidal dal variables) Speed-- or torq Speed torque-co ue-contro ntrolled lled operation operation Defining limit limit values values for speed or torque to to avoid inadmissible loading of the machine under test Operation in all four quadrants (showing the generator torque) Display of the the characteristics characteristics from from several exerexercises to enable parameter changes to be seen Oscilloscope function for displaying displaying the waveforms of voltage, current and efficiency
PosiDrive is a program for examining a displacement and positioning system. • Defining Setpoint positions positions with with freely freely selectable values for the ramp time, maximum speed, maximum torque and delay (waiting time) • Single Single-step -step processing processing or continuous continuous running running to the specified positions • Examining the effects of the controller controller parameparameters on the positioning accuracy • Graphic display display of the the values of position, position, torque torque and speed, in a timing chart
M E E
Order No.: SO6006-2J
INTERFACE MODULE
Order No.: SO6006-4A
Attachable field bus module for coupling between PC, frequency converter and servo drive amplifier. • Connection sub-assembly for RS232/RS RS232/RS485 485 • Potential isolation to control/power control/power section • Suita Suitable ble interface interface cable cable (LM9028) (LM9028)
Order No.: LM8925 + LM9028
6
7
E E M 2 D C MA C H I N E S Despite their declining use for industrial purposes, DC machines constitute the basis for training in the subject of electric machines. They are ideal for demonstrating the various possibilities of open- and closed-loop control systems for machines.The following training objectives are covered for shunt wound, series wound and compound wound machines:
MOTOR OPERATION: • Connectin Connecting g the the motor motor • Comparison of shunt wound, series series wound and compound wound machines • Ty Typical pical mach machine ine data data • Open-loop speed control with with starter starter and field regulator
EEM 2 DC MACHI N ES • Revers Reversing ing the directi direction on of rotation rotation • Load char character acteristi istics cs {n, I, P 1, P 2 2, η} = f(M) • Evalu Evaluation ation of the measure measured d results results
GENERATOR OPERATION: • Connectin Connecting g the gener generator ator • Armat Armature ure voltage voltage as a function function of the exciter current • Function and application application of the field regulator • Voltage control, self-excitation and separate separate excitation • Armature current and armature armature voltage voltage at constant speed and constant exciter current • Load diagram diagram of the genera generator tor
Order No.
Description
SE 2662-3D
DC multi-circuit , comp ound w ound machine, 0.3 kW
0.3 kW
1 kW
SE266 2-3 A
DC shunt wound mac hine, 0.3 kW
(A)
SE266 2-3 B
DC ser ies wound ma chine, 0.3 kW
(A)
SE266 2-3 C
DC c omp ound wo und ma chine, 0.3 kW
(A)
SO3212-5F
Field regulator for DC machines, 0.1 /0.3 kW
1
SO3212-6B
St ar ter for DC machines, 0.3 kW
1
SO3212-6M
Load resist or, 0.3 kW
1
SE 2662-2A
Rubber coupling sleeve, 0.3 kW
1
SE 2662-2B
Coupling guard, 0 .3 kW
1
SE 2662-2C
Shaft end guard, 0 .3 kW
1
SE 2662-5D
DC multi-circuit , comp ound w ound machine, 1 kW
SE266 2-5 A
DC shunt wound mac hine, 1 kW
(A)
SE266 2-5 B
DC ser ies wound ma chine, 1 kW
(A)
SE266 2-5 C SO3213-6F
DC c omp ound wo und ma chine, 1 k W Field regulator for DC machines, 1 kW
(A) 1
SO3213-6B SE 2662-6J
St ar ter for DC machines, 1 kW Load resist or, 1 kW
1 1
SE 2662-6A SE 2662-6B
Rubber coupling sleeve, 1 kW Coupling guard, 1 kW
1 1
SE 2662-6C
Shaft end guard, 1 kW
1
1
1
Machine Test Stand, Servo Drive/Brake System: SO3636-6R
Digital cont rol unit for s ervo d rive/ser vo br ake, 0.3 kW
1
SE 2663-6A SE 2663-6D
Serv o motor/s ervo b rake, 0 .3 kW Digital cont rol unit for s ervo drive / s er vo br ake, 1 kW
1
SE 2663-6E LM892 5
Serv o motor/s ervo b rake, 1 kW RS2 32/485 interface module for frequency convert er & univers al drive am plifier
1
1 1
LM902 8
PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1
1
Softw are Ac Act iv eDCMA DC DC-m achines ch char act eristics wi with se ser vo brake V1.0 (G (GB )
1
1
SO5156-9K
EE M 2 Indus tr ial DC Mult i-circuit Com pound Wound Machines 0.3 kW (GB )
1
SO5156-9R
EE M 2 Indus tr ial DC Mult i-circuit Com pound Wound Machines 1.0 kW (GB )
1
Software: SO6006-4C
Literature: 1
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
SO3212-5W
DC power supply 0...250 V/10 A s tabilised
1
1
2
2
1 15
1 15
5 1
5 1
S E N I H C A M C I R T C E L E M E E
Measuring instruments: SO5127-1L
Large-s cale t rue RMS m et er
Accessories: SO5148-1F SO5126-9X
Set of s afet y connection cables 4 mm (47 pcs.) Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z ST70 03-1CG
Safety prot ect ed connection plug 19/4 mm, white, with tapping Tab le-top frame, 2 levels, W 1230 x H 740 mm, grey
(A) Alternative machine 0.3 kW category 1 kW category independent of the power rating
8
9
E E M 2 D C MA C H I N E S Despite their declining use for industrial purposes, DC machines constitute the basis for training in the subject of electric machines. They are ideal for demonstrating the various possibilities of open- and closed-loop control systems for machines.The following training objectives are covered for shunt wound, series wound and compound wound machines:
MOTOR OPERATION: • Connectin Connecting g the the motor motor • Comparison of shunt wound, series series wound and compound wound machines • Ty Typical pical mach machine ine data data • Open-loop speed control with with starter starter and field regulator
EEM 2 DC MACHI N ES • Revers Reversing ing the directi direction on of rotation rotation • Load char character acteristi istics cs {n, I, P 1, P 2 2, η} = f(M) • Evalu Evaluation ation of the measure measured d results results
GENERATOR OPERATION: • Connectin Connecting g the gener generator ator • Armat Armature ure voltage voltage as a function function of the exciter current • Function and application application of the field regulator • Voltage control, self-excitation and separate separate excitation • Armature current and armature armature voltage voltage at constant speed and constant exciter current • Load diagram diagram of the genera generator tor
Order No.
Description
SE 2662-3D SE266 2-3 A
DC multi-circuit , comp ound w ound machine, 0.3 kW DC shunt wound mac hine, 0.3 kW
0.3 kW 1 (A)
1 kW
SE266 2-3 B
DC ser ies wound ma chine, 0.3 kW
(A)
SE266 2-3 C
DC c omp ound wo und ma chine, 0.3 kW
(A)
SO3212-5F
Field regulator for DC machines, 0.1 /0.3 kW
1
SO3212-6B
St ar ter for DC machines, 0.3 kW
SO3212-6M
Load resist or, 0.3 kW
1
SE 2662-2A
Rubber coupling sleeve, 0.3 kW
1
1
SE 2662-2B
Coupling guard, 0 .3 kW
1
SE 2662-2C
Shaft end guard, 0 .3 kW
1
SE 2662-5D
DC multi-circuit , comp ound w ound machine, 1 kW
SE266 2-5 A
DC shunt wound mac hine, 1 kW
(A)
SE266 2-5 B
DC ser ies wound ma chine, 1 kW
(A)
SE266 2-5 C SO3213-6F
DC c omp ound wo und ma chine, 1 k W Field regulator for DC machines, 1 kW
(A) 1
SO3213-6B SE 2662-6J
St ar ter for DC machines, 1 kW Load resist or, 1 kW
1 1
SE 2662-6A SE 2662-6B
Rubber coupling sleeve, 1 kW Coupling guard, 1 kW
1 1
SE 2662-6C
Shaft end guard, 1 kW
1
1
Machine Test Stand, Servo Drive/Brake System: SO3636-6R
Digital cont rol unit for s ervo d rive/ser vo br ake, 0.3 kW
1
SE 2663-6A SE 2663-6D
Serv o motor/s ervo b rake, 0 .3 kW Digital cont rol unit for s ervo drive / s er vo br ake, 1 kW
1
SE 2663-6E LM892 5
Serv o motor/s ervo b rake, 1 kW RS2 32/485 interface module for frequency convert er & univers al drive am plifier
1
1 1
LM902 8
PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1
1
Softw are Ac Act iv eDCMA DC DC-m achines ch char act eristics wi with se ser vo brake V1.0 (G (GB )
1
1
SO5156-9K
EE M 2 Indus tr ial DC Mult i-circuit Com pound Wound Machines 0.3 kW (GB )
1
SO5156-9R
EE M 2 Indus tr ial DC Mult i-circuit Com pound Wound Machines 1.0 kW (GB )
1
Software: SO6006-4C
Literature: 1
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
SO3212-5W
DC power supply 0...250 V/10 A s tabilised
1
1
2
2
1 15
1 15
5 1
5 1
S E N I H C A M C I R T C E L E M E E
Measuring instruments: SO5127-1L
Large-s cale t rue RMS m et er
Accessories: SO5148-1F SO5126-9X
Set of s afet y connection cables 4 mm (47 pcs.) Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z ST70 03-1CG
Safety prot ect ed connection plug 19/4 mm, white, with tapping Tab le-top frame, 2 levels, W 1230 x H 740 mm, grey
(A) Alternative machine 0.3 kW category 1 kW category independent of the power rating
8
9
EEM 3 AC MACHI NE S AC machines are available with power ratings of up to several kW's. Their main field of application is in operating mobile loads (consumers). AC machines are evident in many areas of daily life, for instance, an electric razor on to a washing machine. The subject of AC Machines covers the following types: • Uni Univer versal sal moto motors rs • Rep Repuls ulsion ion motor motors s • Single-phase motors with bifilar starting starting winding winding
EEM 3 AC MAC HI NES • Single-phase motors with with starting starting and operating capacitor • Spl Splitit-pol pole e motors motors The training objectives cover: • Conne Connection ction and and operating operating the the motor • Revers Reversing ing the directi direction on of rotation rotation • Recor Recording ding machinemachine-speci specific fic values and 2, cos ϕ, characteristic curves {n, I, P 1, P 2 ϕ, η} = f(M) • Load and accelerati acceleration on characteris characteristics tics • Evalu Evaluatin ating g the measured measured values values
EEM 3.1 EEM 3.2 EEM 3.3 EEM 3.4 EEM 3.5 EEM 3.1 EEM 3.2 EEM 3.3 EEM 3.4
Universal motor Repulsion motor Single-phase motor with Single-phase motor with Split-pole motor Universal motor Repulsion motor Single-phase motor with Single-phase motor with
Order No.
Description
SE 2662-3E
Univ ersal m ot or, 0.3 kW
bifilar starting winding starting and operating capacitor
bifilar starting winding starting and operating capacitor
1 . 2 . 3 . 4 . 5 . 1 . 2 . 3 . 4 . 3 3 3 3 3 3 3 3 3 M M M M M M M M M E E E E E E E E E E E E E E E E E E
0.3 kW
1 kW
1
SE 2662-3F
AC repulsion motor, 0.3 kW
SE 2662-3N SE 2662-3P SE 2662-1Q
AC-motor w ith bifilar w ind ing, 0.3 kW AC-mot or w ith s tarting and oper at ing capacit or, 0.3 kW Split-pole motor, 0 .1 kW (only available as 100 W m ot or )
1
SE 2662-2A SE 2662-2B
Rubber coupling sleeve, 0.3 kW Coupling guard, 0 .3 kW
1 1
1 1
1 1
1 1
1 1
SE 2662-2C SE 2662-5E
Shaft end guard, 0 .3 kW Univ ersal m ot or, 1 kW
1
1
1
1
1
SE 2662-5F SE 2662-5N
AC repulsion motor, 1 kW AC-motor w ith bifilar w ind ing, 1 kW
SE 2662-5P SE 2662-6A
AC-mot or w ith s tarting and oper at ing capacit or, 1 kW Rubber coupling sleeve, 1 kW
1
1
1
SE 2662-6B
Coupling guard, 1 kW
1
1
1 1
SE 2662-6C
Shaft end guard, 1 kW
1
1
1 1
SO3538-9P
Rectifier, 25 0 V/10 A
1
1 1
1
1 1
1 1 1
1 1 1
1
1 1
1
Equipment List, Machine Test Stand, Servo Drive/Brake System: SO3636-6R
Digital cont rol unit for s ervo d rive/ser vo br ake, 0.3 kW
1
1
1
1
1
SE 2663-6A SE 2663-6D
Serv o motor/s ervo b rake, 0 .3 kW Digital cont rol unit for s ervo d rive/ser vo br ake, 1 kW
1
1
1
1
1
SE 2663-6E
Serv o motor/s ervo b rake, 1 kW
L M8 M8 92 92 5
R S2 S2 32 32 /4 /4 85 85 in in te te rf rf ac ac e m od od ul ul e f or or
LM902 8
frequency convert er & univers al drive am plifier PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1 1 1
with serv o brake V1.0 (GB )
1
1
1
1
1
1
1
1 1
SO5156-9L
EE M 3 Indus tr ial AC Machines 0.3 kW (GB)
1
1
1
1
1
SO5156-9S
EE M 3 Indus tr ial AC Machines 1.0 kW (GB )
1
1
1 1
Software: SO6006-4A SO6006 -4A
S E N I H C A M C I R T C E L E M E E
Software Softwa re Active ActiveASMA ASMA asynch asynchronou ronous s machin machine e chara characterist cteristics ics
Literature:
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
1
1
1
1
1
1 1
Measuring instruments: SO5127-1L SO5127-1R
Large-s cale t rue RMS m et er Large-s cale elect ronic watt meter
2 2 1 1
2 1
2 2 1 1
2 1
2 1
2 2 1 1
SO5127-1M
Large-s cale power factor and phas e angle meter
1
1
1
1
1
1
1 1
1
Accessories:
10
SO3212-1W
Cut-out sw itch, 4 pole
1
1
1
1
1
1
1
1
SO5148-1F
Set of s afet y connection cables 4 mm (47 pcs.)
1
1
1
1
1
1
1
1 1
1
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z ST70 03-1CG
Safety pr prot ect ed c co onnection p pllug 19 19/4 mm mm, wh white, wi with ta tapping Tab le-top frame, 2 levels , W 1230 x H 740 mm, grey
15 15 15 15 15 15 15 15 15 15 5 1
5 1
5 1
5 1
5 1
5 1
5 1
5 5 1 1
11
EEM 3 AC MACHI NE S AC machines are available with power ratings of up to several kW's. Their main field of application is in operating mobile loads (consumers). AC machines are evident in many areas of daily life, for instance, an electric razor on to a washing machine. The subject of AC Machines covers the following types: • Uni Univer versal sal moto motors rs • Rep Repuls ulsion ion motor motors s • Single-phase motors with bifilar starting starting winding winding
EEM 3 AC MAC HI NES • Single-phase motors with with starting starting and operating capacitor • Spl Splitit-pol pole e motors motors The training objectives cover: • Conne Connection ction and and operating operating the the motor • Revers Reversing ing the directi direction on of rotation rotation • Recor Recording ding machinemachine-speci specific fic values and 2, cos ϕ, characteristic curves {n, I, P 1, P 2 ϕ, η} = f(M) • Load and accelerati acceleration on characteris characteristics tics • Evalu Evaluatin ating g the measured measured values values
EEM 3.1 EEM 3.2 EEM 3.3 EEM 3.4 EEM 3.5 EEM 3.1 EEM 3.2 EEM 3.3 EEM 3.4
Universal motor Repulsion motor Single-phase motor with Single-phase motor with Split-pole motor Universal motor Repulsion motor Single-phase motor with Single-phase motor with
Order No.
Description
SE 2662-3E
Univ ersal m ot or, 0.3 kW
SE 2662-3F
AC repulsion motor, 0.3 kW
SE 2662-3N SE 2662-3P SE 2662-1Q
AC-motor w ith bifilar w ind ing, 0.3 kW AC-mot or w ith s tarting and oper at ing capacit or, 0.3 kW Split-pole motor, 0 .1 kW (only available as 100 W m ot or )
SE 2662-2A SE 2662-2B
Rubber coupling sleeve, 0.3 kW Coupling guard, 0 .3 kW
1 1
1 1
1 1
1 1
1 1
SE 2662-2C SE 2662-5E
Shaft end guard, 0 .3 kW Univ ersal m ot or, 1 kW
1
1
1
1
1
SE 2662-5F SE 2662-5N
AC repulsion motor, 1 kW AC-motor w ith bifilar w ind ing, 1 kW
SE 2662-5P SE 2662-6A
AC-mot or w ith s tarting and oper at ing capacit or, 1 kW Rubber coupling sleeve, 1 kW
1
1
1
SE 2662-6B SE 2662-6C
Coupling guard, 1 kW Shaft end guard, 1 kW
1 1
1 1
1 1 1 1
SO3538-9P
Rectifier, 25 0 V/10 A
1
1 1
bifilar starting winding starting and operating capacitor
bifilar starting winding starting and operating capacitor
1 . 2 . 3 . 4 . 5 . 1 . 2 . 3 . 4 . 3 3 3 3 3 3 3 3 3 M M M M M M M M M E E E E E E E E E E E E E E E E E E
0.3 kW
1 kW
1 1 1 1 1
1 1 1
1
1 1
1
Equipment List, Machine Test Stand, Servo Drive/Brake System: SO3636-6R
Digital cont rol unit for s ervo d rive/ser vo br ake, 0.3 kW
1
1
1
1
1
SE 2663-6A SE 2663-6D
Serv o motor/s ervo b rake, 0 .3 kW Digital cont rol unit for s ervo d rive/ser vo br ake, 1 kW
1
1
1
1
1
SE 2663-6E
Serv o motor/s ervo b rake, 1 kW
L M8 M8 92 92 5
R S2 S2 32 32 /4 /4 85 85 in in te te rf rf ac ac e m od od ul ul e f or or
LM902 8
frequency convert er & univers al drive am plifier PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1 1 1
with serv o brake V1.0 (GB )
1
1
1
1
1
1
1
1 1
SO5156-9L
EE M 3 Indus tr ial AC Machines 0.3 kW (GB)
1
1
1
1
1
SO5156-9S
EE M 3 Indus tr ial AC Machines 1.0 kW (GB )
1
1
1 1
Software: SO6006-4A SO6006 -4A
S E N I H C A M C I R T C E L E M E E
Software Softwa re Active ActiveASMA ASMA asynch asynchronou ronous s machin machine e chara characterist cteristics ics
Literature:
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
1
1
1
1
1
1 1
Measuring instruments: SO5127-1L SO5127-1R
Large-s cale t rue RMS m et er Large-s cale elect ronic watt meter
2 2 1 1
2 1
2 2 1 1
2 1
2 1
2 2 1 1
SO5127-1M
Large-s cale power factor and phas e angle meter
1
1
1
1
1
1
1 1
1
Accessories: SO3212-1W
Cut-out sw itch, 4 pole
1
1
1
1
1
1
1
1
SO5148-1F
Set of s afet y connection cables 4 mm (47 pcs.)
1
1
1
1
1
1
1
1 1
1
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z ST70 03-1CG
Safety pr prot ect ed c co onnection p pllug 19 19/4 mm mm, wh white, wi with ta tapping Tab le-top frame, 2 levels , W 1230 x H 740 mm, grey
15 15 15 15 15 15 15 15 15 15 5 1
5 1
5 1
5 1
5 1
5 1
5 1
5 5 1 1
10
11
E E M 4 T H R E E - P H A S E A S Y N C H R O N O U S MA C H I N E S Asynchronous machines are available with power ratings up in the MW range. Due to their straightforward construction, asynchronous squirrel-cage machines are particularly widespread. The subject of Asynchronous Asynchronou s Machines covers the following types: • Three-phase motor with with squirrel-cage squirrel-cage rotor • Pole-changeable three-phase motor according according to Dahlander • Pole-changeable three-phase motor with with two two
separate windings • Thre Three-pha e-phase se motor with slip-ri slip-rings ngs The training objectives are: • Conne Connection ction and and operating operating the the motor • Revers Reversing ing the directi direction on of rotation rotation • Man Manual ual switc switchi hing ng • Recor Recording ding machinemachine-speci specific fic values and 2, cos ϕ, characteristic curves {n, I, P 1, P 2 ϕ, η} = f(M) • Evalu Evaluatin ating g the measured measured values values
EEM 4 THREE -PHASE ASYN CHR ONO US MACHI NES EEM 4.1 EEM 4.2 EEM 4.3 EEM 4.4 EEM 4.1 EEM 4.2 EEM 4.3 EEM 4.4
Squirrel-cage rotor Squirrel-cage rotor, pole-changeable according to Dahlander Squirrel-cage rotor, pole-changeable with two separate windings Three-phase motor with slip-rings Squirrel-cage rotor Squirrel-cage rotor, pole-changeable according to Dahlander Squirrel-cage rotor, pole-changeable with two separate windings Three-phase motor with slip-rings
Order No.
Description
SE 2662-3G
Three-phase as ynchronous motor, 0.3 kW
SE 26 2662-3K
Three-phase as as yn ynchronous mo motor, po pole ch changing, Da Dahlander, 0. 0.3 kW kW
1 . 2 . 3 . 4 . 1 . 2 . 3 . 4 . 4 4 4 4 4 4 4 4 M M M M M M M M E E E E E E E E E E E E E E E E
0.3 kW
1 kW
1 1
SE266 SE2 6622-3L 3L
Thrr eeTh ee-ph phas ase e asyn asynch chrr ono onous us mo moto torr, pol pole e cha chang ngin ing, g, two se sepa parr ate ate wi wind ndin ings, gs, 0. 0.3 3 kW kW
SE 2662-3W SO3212-6M SO3212-5C
Three-phase multi-function machine, 0.3 kW Load resist or, 0.3 kW St ar ter for s lip -r ing motors , 0.1 /0.3 kW
1
SO321 2-6R SE 2662-2A
Loa d resisto r for synchronous g enera tor, 0.3 k W Rubber coupling sleeve, 0.3 kW
1
1
(1) 1 1
SE 2662-2B SE 2662-2C
Coupling guard, 0 .3 kW Shaft end guard, 0 .3 kW
1 1
1 1
1 1
SE 2662-5G SE 2662-5K
Three-phase as ynchronous motor with slip-ring rot or, 1 kW Three-phase as ynchronous machine, Dahlander, 1 kW
S E2 E2 66 66 22- 5L 5L SE 2662-6W
Th re ree- ph as as e as yn ynchron ou ous ma ch chine , pole chang ing, w it h 2 s ep ep ar ate w ind ings , 1 kW Three-phase multi-function machine, 1 kW
SE 2662-6J
Load resist ance, 1 kW
SO3212-6D
St ar ter for s lip -r ing motors , 1 kW
SE266 2-6K SE 2662-6A
Loa d resista nce for sync hr onous g ener ator, 1 k W Rubber coupling sleeve, 1 kW
1
1
(1) 1 1
SE 2662-6B
Coupling guard, 1 kW
1
1
1 1
SE 2662-6C
Shaft end guard, 1 kW
1
1
1 1
SO3212-2D SO3212-2H
Star-Delta sw it ch Pole rever ser Dahland er
SO3212-2K
Pole rever ser for 2 s epar ate w indings
SO3212-1W
Cut-out sw itch, 4 pole
SO3212-6E
Com pens ation panel, 6 x 1µF/40 0V
1 1 1
1 1 1 1 1 1 1 1
1
1 1
1 1
1 1
1
1 1
Equipment List, Machine Test Stand, Servo Drive/Brake System:
S E N I H C A M C I R T C E L E M E E
SO3636-6R
Digital cont rol unit for s ervo d rive/ser vo br ake, 0.3 kW
1
1
1
1
SE 2663-6A SE 2663-6D
Serv o motor/s ervo b rake, 0 .3 kW Digital cont rol unit for s ervo d rive/ser vo br ake, 1 kW
1
1
1
1 1
1
SE 2663-6E L M8 M8 92 92 5
Serv o motor/s ervo b rake, 1 kW R S2 S2 32 32 /4 /4 85 85 i nt nt er er fa fa ce ce m od od ul ul e f or or f re re qu qu en en cy cy co nv nv er er te te r & u ni ni ve ve rs rs al al d ri ri ve ve am pl pl if ie ie r
1
1
1
1
1 1
1 1
1 1 1 1
LM902 8
PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1
1
1
1
1
1
1 1
Software ActiveASMA asynchronous machine characteristics with servo brake V1.0 (GB)
1
1
1
1
1
1
1
EE M 4 In Indus tr ial T hree-phas e As ynchronous M Mo otors 0 0..3kW (GB) EE M 4 Indus tr ial T hree-phas e As ynchronous Motors 1kW (GB)
1
1
1
1 1
1
1 1
1
1
1 1
1 1
Software: SO6006-4A
1
Literature: SO5156-9M SO5156-9T
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
1
1
Measuring instruments: SO5127-1L
Large-s cale t rue RMS m et er
2 2
2 2
2 2
2 2
SO5127-1R
Large-s cale elect ronic watt meter
1
1
1
1
1
1
1 1
SO5127-1M
Large-s cale power factor and phas e angle meter
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1 1
Accessories: SO5148-1F
Set of s afet y connection cables 4 mm (47 pcs.)
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z
Safety prot ect ed connection plug 19/4 mm, white, with tapping
5
5
5
5
5
5
5 5
ST70 03-1CG
Tab le-top frame, 2 levels , W 1230 x H 740 mm, grey
1
1
1
1
1
1
1 1
15 15 15 15 15 15 15 15 15
(1) Optional for the exercises dealing with a rotary transformer 12
13
E E M 4 T H R E E - P H A S E A S Y N C H R O N O U S MA C H I N E S Asynchronous machines are available with power ratings up in the MW range. Due to their straightforward construction, asynchronous squirrel-cage machines are particularly widespread. The subject of Asynchronous Asynchronou s Machines covers the following types: • Three-phase motor with with squirrel-cage squirrel-cage rotor • Pole-changeable three-phase motor according according to Dahlander • Pole-changeable three-phase motor with with two two
separate windings • Thre Three-pha e-phase se motor with slip-ri slip-rings ngs The training objectives are: • Conne Connection ction and and operating operating the the motor • Revers Reversing ing the directi direction on of rotation rotation • Man Manual ual switc switchi hing ng • Recor Recording ding machinemachine-speci specific fic values and 2, cos ϕ, characteristic curves {n, I, P 1, P 2 ϕ, η} = f(M) • Evalu Evaluatin ating g the measured measured values values
EEM 4 THREE -PHASE ASYN CHR ONO US MACHI NES EEM 4.1 EEM 4.2 EEM 4.3 EEM 4.4 EEM 4.1 EEM 4.2 EEM 4.3 EEM 4.4
Squirrel-cage rotor Squirrel-cage rotor, pole-changeable according to Dahlander Squirrel-cage rotor, pole-changeable with two separate windings Three-phase motor with slip-rings Squirrel-cage rotor Squirrel-cage rotor, pole-changeable according to Dahlander Squirrel-cage rotor, pole-changeable with two separate windings Three-phase motor with slip-rings
Order No.
Description
SE 2662-3G
Three-phase as ynchronous motor, 0.3 kW
SE 26 2662-3K
Three-phase as as yn ynchronous mo motor, po pole ch changing, Da Dahlander, 0. 0.3 kW kW
SE266 SE2 6622-3L 3L
Thrr eeTh ee-ph phas ase e asyn asynch chrr ono onous us mo moto torr, pol pole e cha chang ngin ing, g, two se sepa parr ate ate wi wind ndin ings, gs, 0. 0.3 3 kW kW
SE 2662-3W SO3212-6M SO3212-5C
Three-phase multi-function machine, 0.3 kW Load resist or, 0.3 kW St ar ter for s lip -r ing motors , 0.1 /0.3 kW
SO321 2-6R SE 2662-2A
Loa d resisto r for synchronous g enera tor, 0.3 k W Rubber coupling sleeve, 0.3 kW
1
1
(1) 1 1
SE 2662-2B SE 2662-2C
Coupling guard, 0 .3 kW Shaft end guard, 0 .3 kW
1 1
1 1
1 1
SE 2662-5G SE 2662-5K
Three-phase as ynchronous motor with slip-ring rot or, 1 kW Three-phase as ynchronous machine, Dahlander, 1 kW
S E2 E2 66 66 22- 5L 5L SE 2662-6W
Th re ree- ph as as e as yn ynchron ou ous ma ch chine , pole chang ing, w it h 2 s ep ep ar ate w ind ings , 1 kW Three-phase multi-function machine, 1 kW
SE 2662-6J SO3212-6D
Load resist ance, 1 kW St ar ter for s lip -r ing motors , 1 kW
SE266 2-6K SE 2662-6A
Loa d resista nce for sync hr onous g ener ator, 1 k W Rubber coupling sleeve, 1 kW
1
1
(1) 1 1
SE 2662-6B
Coupling guard, 1 kW
1
1
1 1
SE 2662-6C
Shaft end guard, 1 kW
1
1
1 1
SO3212-2D SO3212-2H
Star-Delta sw it ch Pole rever ser Dahland er
SO3212-2K
Pole rever ser for 2 s epar ate w indings
SO3212-1W
Cut-out sw itch, 4 pole
SO3212-6E
Com pens ation panel, 6 x 1µF/40 0V
1 . 2 . 3 . 4 . 1 . 2 . 3 . 4 . 4 4 4 4 4 4 4 4 M M M M M M M M E E E E E E E E E E E E E E E E
0.3 kW
1 kW
1 1 1 1 1 1
1 1 1 1 1 1 1 1
1
1 1
1 1
1 1
1
1 1
Equipment List, Machine Test Stand, Servo Drive/Brake System: SO3636-6R
Digital cont rol unit for s ervo d rive/ser vo br ake, 0.3 kW
1
1
1
1
SE 2663-6A SE 2663-6D
Serv o motor/s ervo b rake, 0 .3 kW Digital cont rol unit for s ervo d rive/ser vo br ake, 1 kW
1
1
1
1
SE 2663-6E L M8 M8 92 92 5
Serv o motor/s ervo b rake, 1 kW R S2 S2 32 32 /4 /4 85 85 i nt nt er er fa fa ce ce m od od ul ul e f or or f re re qu qu en en cy cy co nv nv er er te te r & u ni ni ve ve rs rs al al d ri ri ve ve am pl pl if ie ie r
1
1
1
LM902 8
S E N I H C A M C I R T C E L E M E E
1
1
1 1
1
1 1
1 1
1 1 1 1
PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1
1
1
1
1
1
1 1
Software ActiveASMA asynchronous machine characteristics with servo brake V1.0 (GB)
1
1
1
1
1
1
1
EE M 4 In Indus tr ial T hree-phas e As ynchronous M Mo otors 0 0..3kW (GB) EE M 4 Indus tr ial T hree-phas e As ynchronous Motors 1kW (GB)
1
1
1
1 1
1
1 1
1
1
1 1
Software: SO6006-4A
1
Literature: SO5156-9M SO5156-9T
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
1
1
Measuring instruments: SO5127-1L
Large-s cale t rue RMS m et er
2 2
2 2
2 2
2 2
SO5127-1R
Large-s cale elect ronic watt meter
1
1
1
1
1
1
1 1
SO5127-1M
Large-s cale power factor and phas e angle meter
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1 1
Accessories: SO5148-1F
Set of s afet y connection cables 4 mm (47 pcs.)
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z
Safety prot ect ed connection plug 19/4 mm, white, with tapping
5
5
5
5
5
5
5 5
ST70 03-1CG
Tab le-top frame, 2 levels , W 1230 x H 740 mm, grey
1
1
1
1
1
1
1 1
15 15 15 15 15 15 15 15 15
(1) Optional for the exercises dealing with a rotary transformer 12
13
EEM 5 SYNCHRONOUS MACHINES AND MAINS SYNCHRONISATION; RELUCTANCE MACHINES Synchronous machines are primarily used as generators in power generation and as highly dynamic drives (servos). Training objectives: • Sync Synchron hronous ous machi machines nes • Mains sync synchron hronisat isation ion • Reluc Reluctanc tance e machi machines nes
GENERATOR OPERATION: • • • •
Connecting Connectin g the gener generator ator Voltage adjustment via the exciter current current Load characteri characteristic stics s in gener generator ator operation operation Evaluatin Evalu ating g the measured measured values values
EEM 5.2 MAINS SYNCHRONISATION EEM 5.1 SYNCHRONOUS MACHINES Training objectives:
MOTOR OPERATION: • • • • • • • • • • •
Connecting Connectin g the the motor motor Star St arti ting ng Reversing Revers ing the directio direction n of rotation rotation Excitation Excit ation and load load angle angle Phase Pha se shi shifte fterr Power factor factor and and exciter exciter current current Load characteri characteristic stics s in motor operation operation V characte characteris ristic tics s Stabil Sta bilit ity y limits limits Under-- and overexc Under overexcitat itation ion Evaluatin Evalu ating g the measured measured values values
Training objectives: • EEM 5.21 Mains synchronisati synchronisation on using lamps (bright, dark and synchronising circuit) • EEM 5.22 Mains synchronisati synchronisation on using double frequency and double voltage meters, synchronoscope and zero-voltage meter
EEM 5.3 THREE-PHASE RELUCTANCE MACHINE Training objectives: • Conne Connectin cting g the machi machine ne • St Star arti ting ng • Revers Reversing ing the directi direction on of rotation rotation • Load char character acteristi istics cs • Evalu Evaluatin ating g the measured measured values values
EEM 5 SYNCHRONOUS MACHINES AND MAINS SYNCHRONISATION; RELUCTANCE MACHINES EEM 5.1 EEM 5.21 EEM 5.22 EEM 5.3 EEM 5.1 EEM 5.21 EEM 5.22
Synchronous Machines Mains synchronisation using lamps (bright, dark and synchronising circuit)
EEM 5.3 Order No.
Three-phase Reluctance Machine Description
SE 2662-3W
Three-phase multi-function machine, 0.3 kW
S E2 E2 66 66 22- 3Q 3Q
T hr hr ee ee -p -p ha ha se se sy sy nc nc hr hr on ono us us ma ma ch chi ne ne wi wit h s mo mo ot oth -c -c or or e r ot oto r, 0. 0. 3 k W
( A) A) ( A) A) ( A) A)
SE266 2-3 M
Three- phase sy synchro nous ma mac hine wi with sa sa lient po pole, 0. 0.3 kW kW
(A) (A) (A)
SE 2662-3U SO3212-6R SO3212-5K
Reluctance motor, 0.3 kW Load resist or for sy nchronous generator, 0.3 kW Var iable isolating tr ans for mer/excit er 0 -2 30V
SO3212-1J SE 2662-2A
Mains synchronisation using double frequency and double voltage meters, synchronoscope and zero-voltage meter
Three-phase Reluctance Machine Synchronous Machines 1 2 1 2 Mains synchronisation using lamps (bright, dark and synchronising circuit) 1 . 2 . 2 . 3 . 1 . 2 . 2 . 3 . Mains synchronisation using double frequency and double voltage meters, synchronoscope and zero-voltage meter
5 5 5 5 5 5 5 5 M M M M M M M M E E E E E E E E E E E E E E E E
0.3 kW 1
1
1 kW
1
1 1 1
1
1
Motor protection sw itch, 0 .4 - 0 .63 A Rubber coupling sleeve, 0.3 kW
1
1 1
1 1
1
SE 2662-2B SE 2662-2C
Coupling guard, 0 .3 kW Shaft end guard, 0 .3 kW
1 1
1 1
1 1
1 1
SE 2662-6W SE266 2-5 Q
Three-phase multi-function machine, 1 kW Three- phase sy synchro nous ma mac hine wi with smo oth co cor e r oto r, 1 kW kW
1 1 1 (A) (A ( A) ( A) A)
SE266 2-5 M SE 2662-6K
Three- phase synchro nous mac hine with sa lient p ole, 1 k W Load resist ance for sy nchronous generators , 1 kW
(A) (A ( A) (A ( A) 1
SO3212-5W
DC power supply, 0-250V/10A stabilised
SO3212-1P
Motor protection sw itch, 1 .6 - 2.5 A
SE 2662-6A SE 2662-6B
Rubber coupling sleeve, 1 kW Coupling guard, 1 kW
1 1 1 1
1
1
1
1
1 1
1 1 1 1
1
1 1
SE 2662-6C
Shaft end guard, 1 kW
SO3212-6T
Synchronising panel
SO3213-1J SO3213-3W
Synchronos cope (96 x 96 mm) Double v oltm et er 2x5 00 V (96 x 96 mm)
1 1
1 1
SO3213-1L
Double frequency met er (96 x 9 6 m m)
1
1
SO3213-1K
Zero-v oltage m eter 400/80 0 V (96 x 96 m m)
1
1
SE 2662-5V SO3212-1W
Reluctance motor, 1 kW Cut-out sw itch, 4 pole
1
1
1
1
1
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
Soft So ftwa warr e Ac Acti tive veAS ASMA MA as asyn ynch chrr ono onous us ma mach chin ine e cha charr act acter eris isti tics cs wi with th se serr vo vo br br ake ake V1 V1.0 .0 (G (GB) B) 1
1
1
1
SO5156-9G
EE M 5 Three-p has e Multi-Function Machine 0 .3 kW (GB)
1
1
1
1
SO5156-8T
EE M 5 Three-p has e Multi-Function Machine 1 kW (GB ) 1
1
1
1
1
1
1 1 1
1 1
1 1
1 1 1 1
1 1
1 1
1 1 1 1
1
1
1 1
1
1
1 1
1
1
1 1
Equipment List, Machine Test Stand, Servo Drive/Brake System: SO3636-6R SE 2663-6A
Digital cont rol unit for s ervo drive / s er vo br ake, 0.3 kW Serv o motor/s ervo b rake, 0 .3 kW
SE 2663-6D SE 2663-6E
Digital cont rol unit for s ervo d rive/ser vo br ake, 1 kW Serv o motor/s ervo b rake, 1 kW
L M8 M8 92 92 5 LM902 8
R S2 S2 32 32 /4 /4 85 85 i nt nt er er fa fa ce ce m od od ul ul e f or or f re re qu qu en en cy cy co nv nv er er te te r & u ni ni ve ve rs rs al al d ri ri ve ve am pl pl if ie ie r PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
S E N I H C A M C I R T C E L E M E E
Software: SO60 SO 6006 06-4 -4A A
Literature:
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
Measuring instruments: SO5127-1L
Large-s cale t rue RMS m et er
2 2
2 2
2 2
2 2
SO5127-1R
Large-s cale elect ronic watt meter
1
1
1
1
1
1
1 1
SO5127-1M
Large-s cale power factor and phas e angle meter
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1 1
Accessories: SO5148-1F
Set of s afet y connection cables 4 mm (47 pcs.)
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z ST70 03-1CG
Safety prot ect ed connection plug 19/4 mm, white, with tapping Tab le-top frame, 2 levels , W 1230 x H 740 mm, grey
15 15 15 15 15 15 15 15 15 5 1
5 1
5 1
5 1
5 1
5 1
5 5 1 1
(A) Alternative for three-phase multi-function machine 14
15
EEM 5 SYNCHRONOUS MACHINES AND MAINS SYNCHRONISATION; RELUCTANCE MACHINES Synchronous machines are primarily used as generators in power generation and as highly dynamic drives (servos). Training objectives: • Sync Synchron hronous ous machi machines nes • Mains sync synchron hronisat isation ion • Reluc Reluctanc tance e machi machines nes
GENERATOR OPERATION: • • • •
Connecting Connectin g the gener generator ator Voltage adjustment via the exciter current current Load characteri characteristic stics s in gener generator ator operation operation Evaluatin Evalu ating g the measured measured values values
EEM 5.2 MAINS SYNCHRONISATION EEM 5.1 SYNCHRONOUS MACHINES Training objectives:
MOTOR OPERATION: • • • • • • • • • • •
Connecting Connectin g the the motor motor Star St arti ting ng Reversing Revers ing the directio direction n of rotation rotation Excitation Excit ation and load load angle angle Phase Pha se shi shifte fterr Power factor factor and and exciter exciter current current Load characteri characteristic stics s in motor operation operation V characte characteris ristic tics s Stabil Sta bilit ity y limits limits Under-- and overexc Under overexcitat itation ion Evaluatin Evalu ating g the measured measured values values
Training objectives: • EEM 5.21 Mains synchronisati synchronisation on using lamps (bright, dark and synchronising circuit) • EEM 5.22 Mains synchronisati synchronisation on using double frequency and double voltage meters, synchronoscope and zero-voltage meter
EEM 5.3 THREE-PHASE RELUCTANCE MACHINE Training objectives: • Conne Connectin cting g the machi machine ne • St Star arti ting ng • Revers Reversing ing the directi direction on of rotation rotation • Load char character acteristi istics cs • Evalu Evaluatin ating g the measured measured values values
EEM 5 SYNCHRONOUS MACHINES AND MAINS SYNCHRONISATION; RELUCTANCE MACHINES EEM 5.1 EEM 5.21 EEM 5.22 EEM 5.3 EEM 5.1 EEM 5.21 EEM 5.22
Synchronous Machines Mains synchronisation using lamps (bright, dark and synchronising circuit)
EEM 5.3 Order No.
Three-phase Reluctance Machine Description
SE 2662-3W
Three-phase multi-function machine, 0.3 kW
S E2 E2 66 66 22- 3Q 3Q
T hr hr ee ee -p -p ha ha se se sy sy nc nc hr hr on ono us us ma ma ch chi ne ne wi wit h s mo mo ot oth -c -c or or e r ot oto r, 0. 0. 3 k W
( A) A) ( A) A) ( A) A)
SE266 2-3 M
Three- phase sy synchro nous ma mac hine wi with sa sa lient po pole, 0. 0.3 kW kW
(A) (A) (A)
SE 2662-3U SO3212-6R SO3212-5K
Reluctance motor, 0.3 kW Load resist or for sy nchronous generator, 0.3 kW Var iable isolating tr ans for mer/excit er 0 -2 30V
1 1
1
1
SO3212-1J SE 2662-2A
Motor protection sw itch, 0 .4 - 0 .63 A Rubber coupling sleeve, 0.3 kW
1
1 1
1 1
1
SE 2662-2B SE 2662-2C
Coupling guard, 0 .3 kW Shaft end guard, 0 .3 kW
1 1
1 1
1 1
1 1
SE 2662-6W SE266 2-5 Q
Three-phase multi-function machine, 1 kW Three- phase sy synchro nous ma mac hine wi with smo oth co cor e r oto r, 1 kW kW
1 1 1 (A) (A ( A) ( A) A)
SE266 2-5 M SE 2662-6K
Three- phase synchro nous mac hine with sa lient p ole, 1 k W Load resist ance for sy nchronous generators , 1 kW
(A) (A ( A) (A ( A) 1
SO3212-5W SO3212-1P
DC power supply, 0-250V/10A stabilised Motor protection sw itch, 1 .6 - 2.5 A
1
1 1
1 1
SE 2662-6A SE 2662-6B
Rubber coupling sleeve, 1 kW Coupling guard, 1 kW
1 1
1 1
1 1 1 1
1
1 1
Mains synchronisation using double frequency and double voltage meters, synchronoscope and zero-voltage meter
Three-phase Reluctance Machine Synchronous Machines 1 2 1 2 Mains synchronisation using lamps (bright, dark and synchronising circuit) 1 . 2 . 2 . 3 . 1 . 2 . 2 . 3 . Mains synchronisation using double frequency and double voltage meters, synchronoscope and zero-voltage meter
5 5 5 5 5 5 5 5 M M M M M M M M E E E E E E E E E E E E E E E E
0.3 kW 1
1
1 kW
1
1
SE 2662-6C
Shaft end guard, 1 kW
SO3212-6T
Synchronising panel
1
SO3213-1J SO3213-3W
Synchronos cope (96 x 96 mm) Double v oltm et er 2x5 00 V (96 x 96 mm)
1 1
1 1
SO3213-1L
Double frequency met er (96 x 9 6 m m)
1
1
SO3213-1K
Zero-v oltage m eter 400/80 0 V (96 x 96 m m)
1
1
SE 2662-5V SO3212-1W
Reluctance motor, 1 kW Cut-out sw itch, 4 pole
1
1
1
1
1
1
1 1
1 1
1 1
1 1
1
1
1 1 1
1 1
1 1
1 1 1 1
Equipment List, Machine Test Stand, Servo Drive/Brake System: SO3636-6R SE 2663-6A
Digital cont rol unit for s ervo drive / s er vo br ake, 0.3 kW Serv o motor/s ervo b rake, 0 .3 kW
SE 2663-6D SE 2663-6E
Digital cont rol unit for s ervo d rive/ser vo br ake, 1 kW Serv o motor/s ervo b rake, 1 kW
L M8 M8 92 92 5 LM902 8
R S2 S2 32 32 /4 /4 85 85 i nt nt er er fa fa ce ce m od od ul ul e f or or f re re qu qu en en cy cy co nv nv er er te te r & u ni ni ve ve rs rs al al d ri ri ve ve am pl pl if ie ie r PC connection cable for RS2 32/485 interface m odule LM8 925, l = 5 m
1 1
1 1
1 1
1 1
1 1
1 1
1 1 1 1
Soft So ftwa warr e Ac Acti tive veAS ASMA MA as asyn ynch chrr ono onous us ma mach chin ine e cha charr act acter eris isti tics cs wi with th se serr vo vo br br ake ake V1 V1.0 .0 (G (GB) B) 1
1
1
1
1
1
1 1
SO5156-9G
EE M 5 Three-p has e Multi-Function Machine 0 .3 kW (GB)
1
1
1
SO5156-8T
EE M 5 Three-p has e Multi-Function Machine 1 kW (GB )
1
1
1 1
1
1
1 1
S E N I H C A M C I R T C E L E M E E
Software: SO60 SO 6006 06-4 -4A A
Literature: 1
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
1
1
Measuring instruments: SO5127-1L
Large-s cale t rue RMS m et er
2 2
2 2
2 2
2 2
SO5127-1R
Large-s cale elect ronic watt meter
1
1
1
1
1
1
1 1
SO5127-1M
Large-s cale power factor and phas e angle meter
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1 1
Accessories: SO5148-1F
Set of s afet y connection cables 4 mm (47 pcs.)
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z ST70 03-1CG
Safety prot ect ed connection plug 19/4 mm, white, with tapping Tab le-top frame, 2 levels , W 1230 x H 740 mm, grey
15 15 15 15 15 15 15 15 15 5 1
5 1
5 1
5 1
5 1
5 1
5 5 1 1
(A) Alternative for three-phase multi-function machine 14
15
E E M/ F E N T
EEM/F ENT
EEM/F FAULT FINDING ON ELECTRIC MACHINES
EEM/F EEM/F
Fault Finding on Electric Machines Fault Finding on Electric Machines
Fault finding with a fault simulator by measuring the resistance of the windings and insulation. All measurements are completed in a no-voltage state. The following faults can be simulated:
Order No.
Description
SE 2662-9D SE 2662-3G
Fault s im ulator for three-phase as ynchronous motor Three-phase as ynchronous motor, 0.3 kW
SE 2662-5G
Three-phase as ynchronous motor, 1 kW
• • • • •
SO5157-8E
1 1
1 kW 1 1
EE M/F Fault Finding on Electric Machines (GB)
1
1
1
1
1 T N E
2 T N E
Measuring instruments: L M8 M8 50 50 1
ENT 1/ENT 2 TRANSFORMERS
• Complete and simplifi simplified ed equivalent equivalent circuits; circuits; measurement of the individual variables • Tran Transformation sformation of current current and voltage voltage
0.3 kW
F / M E E
Literature:
Winding breaks Winding breaks in in the coils coils Insulation faults, winding to winding winding Insulation Insul ation faults, faults, winding winding to frame frame Combinati Combi nations ons of differen differentt faults Fault monitoring and repair repair instructions instructions
Transformers are used in all power classes both in Transformers industry and in domestic appliances. They are used for the conversion of voltages and current. The training system is based on transformers with a power rating of 300 VA. Training topics covered:
F / M E E
• Measuring the the Rush current current using using an oscilloscope oscilloscope • Measurem Measurement ent and calculation calculation of the no-load values values • Measure Measurement ment and calculatio calculation n of the short-circuit short-circuit data • Measuremen Measurements ts with with a variable load • Deter Determin mining ing the efficien efficiency cy • Evaluati Evaluating ng the the measured measured values • Phase angle angle between primary and secondary secondary windings and the effect of asymmetric loading in the circuit groups Yy, Yd, Yz, Dy
I ns ul ula ti ti on on t es es te te r f or or VDE 0 100/610 , EN 61557 /-1 ,2,4, VDE 701/24 0, EN 344
ENT 1 ENT 2
Single-phase isolating transformers Three-phase isolating transformers
Order No.
Description
SE 2662-4Q SE2662-4S SE26624S
Single-phase is olating t rans former, 300 VA Single-phas Singl e-phase e econo economy my transfo transformer rmer (auto (auto-transf -transformer), ormer), 300 VA
1 1
SE 2662-4U SE 2662-4R
Single-phase toroidal isolating t ransform er, 30 0 VA Three-phase is olating t ransformer, 300 VA
1
SE 2662-8N SE 2662-8H
Ohm ic load, three-phase, 1 4-stage, 0.3 kW Capacitive load, three-p has e, 14-st age, 1 kW
1 1
SO5156 SO5 156-5N -5N
ENT 1 Sin Single gle-ph -phase ase Mai Mains ns Tr Trans ansfor formers mers,, 0.3 kW (GB (GB))
1
SO5156-5P
EN T 2 Three-phas e Mains Transf or mers , 0.3 kW (GB )
0.3 kW
0.3 kW
1 1 1
Literature: 1
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
SO5127-2Y
Foot base (pair ) for 5mm panels
1
1
Measuring instruments: LM231 9
Digital m ultim et er 4 3/4 digit
2
2
LM611 3 LM611 5
4-channel isolating amp lifier Test resist or 2A/0.5V
1 1
1 1
LM620 5
Digital s torage oscilloscope, incl. probes
1
1
S E N I H C A M C I R T C E L E M E E
Accessories:
16
LM903 4
Test lead, B NC/B NC
1
1
SO5148-1H
Set of s afet y connection cables 4 mm (34 pcs.)
1
1
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
10
10
SO5126-9Z
Safety prot ect ed connection plug 19/4 mm, white, with tapping
5
5
17
E E M/ F E N T
EEM/F ENT F / M E E
EEM/F FAULT FINDING ON ELECTRIC MACHINES
EEM/F EEM/F
Fault Finding on Electric Machines Fault Finding on Electric Machines
Fault finding with a fault simulator by measuring the resistance of the windings and insulation. All measurements are completed in a no-voltage state. The following faults can be simulated:
Order No.
Description
SE 2662-9D SE 2662-3G
Fault s im ulator for three-phase as ynchronous motor Three-phase as ynchronous motor, 0.3 kW
SE 2662-5G
Three-phase as ynchronous motor, 1 kW
• • • • •
SO5157-8E
1 kW
1 1
1 1
EE M/F Fault Finding on Electric Machines (GB)
1
1
1
1
1 T N E
2 T N E
Measuring instruments: L M8 M8 50 50 1
ENT 1/ENT 2 TRANSFORMERS
• Complete and simplifi simplified ed equivalent equivalent circuits; circuits; measurement of the individual variables • Tran Transformation sformation of current current and voltage voltage
0.3 kW
Literature:
Winding breaks Winding breaks in in the coils coils Insulation faults, winding to winding winding Insulation Insul ation faults, faults, winding winding to frame frame Combinati Combi nations ons of differen differentt faults Fault monitoring and repair repair instructions instructions
Transformers are used in all power classes both in Transformers industry and in domestic appliances. They are used for the conversion of voltages and current. The training system is based on transformers with a power rating of 300 VA. Training topics covered:
F / M E E
• Measuring the the Rush current current using using an oscilloscope oscilloscope • Measurem Measurement ent and calculation calculation of the no-load values values • Measure Measurement ment and calculatio calculation n of the short-circuit short-circuit data • Measuremen Measurements ts with with a variable load • Deter Determin mining ing the efficien efficiency cy • Evaluati Evaluating ng the the measured measured values • Phase angle angle between primary and secondary secondary windings and the effect of asymmetric loading in the circuit groups Yy, Yd, Yz, Dy
I ns ul ula ti ti on on t es es te te r f or or VDE 0 100/610 , EN 61557 /-1 ,2,4, VDE 701/24 0, EN 344
ENT 1 ENT 2
Single-phase isolating transformers Three-phase isolating transformers
Order No.
Description
SE 2662-4Q SE2662-4S SE26624S
Single-phase is olating t rans former, 300 VA Single-phas Singl e-phase e econo economy my transfo transformer rmer (auto (auto-transf -transformer), ormer), 300 VA
1 1
SE 2662-4U SE 2662-4R
Single-phase toroidal isolating t ransform er, 30 0 VA Three-phase is olating t ransformer, 300 VA
1
SE 2662-8N SE 2662-8H
Ohm ic load, three-phase, 1 4-stage, 0.3 kW Capacitive load, three-p has e, 14-st age, 1 kW
1 1
SO5156 SO5 156-5N -5N
ENT 1 Sin Single gle-ph -phase ase Mai Mains ns Tr Trans ansfor formers mers,, 0.3 kW (GB (GB))
1
SO5156-5P
EN T 2 Three-phas e Mains Transf or mers , 0.3 kW (GB )
0.3 kW
0.3 kW
1 1 1
Literature: 1
Power supplies: SO3212-1B
Three-phase supply 400 V/16 A with ear th leakage circuit breaker
1
1
SO5127-2Y
Foot base (pair ) for 5mm panels
1
1
Measuring instruments: LM231 9
Digital m ultim et er 4 3/4 digit
2
2
LM611 3 LM611 5
4-channel isolating amp lifier Test resist or 2A/0.5V
1 1
1 1
LM620 5
Digital s torage oscilloscope, incl. probes
1
1
S E N I H C A M C I R T C E L E M E E
Accessories: LM903 4
Test lead, B NC/B NC
1
SO5148-1H
Set of s afet y connection cables 4 mm (34 pcs.)
SO5126-9X
Safety prot ect ed connection plug 19/4 mm, white
SO5126-9Z
Safety prot ect ed connection plug 19/4 mm, white, with tapping
1
1
1
10
10
5
5
16
17
DI SMOUN TABL E THR EE-P HASE MACHI NE SET
ANAL OG/ DI GI TAL MULTI METER The subject of electric machines, power electronics and drive engineering places special demands on the measurements used. In addition to an efficient overload protection, the detection of the measured values must be accurate, irrespective of the waveform shapes being measured. The universal test
As an alternative to the standard 0.3 kW machines, the following machines can be assembled and examined using the LN three-phase machine set:
SQUIRREL-CAGE MACHINE
SYNCHRONOUS MACHINE
SLIP-RING MACHINE
The set consists of a standard uniform stator for all types of machine. The rotor is exchangeable. Because of the dismountable assembly, the set is particularly suitable for learning the fundamentals of machine construction and examining the differences between the various types of machine. Cut-away, sectional models are no longer required since, after assembly, the machines are fully-functional and can be coupled to a braking system.
S E N I H C A M C I R T C E L E
The stator is mounted on a black anti-vibration machine base. The terminal box includes connections for the machine at 4 mm safety-protected sockets. Overlay masks adapted for the various machines show a screen-print and the connections. The various rotor types are easily exchanged and no hand tools are required. Protection against thermal overload is achieved by way of temperature sensors. The electric connections to the rotor (slip-ring rotor, synchronous machine) are made via a polarity-protected plug-in connector. All rotating parts can be protected by shaft end guards. The machines conform to the regulations according to DIN VDE 0530 and the protection class IP 20. The basic equipment set includes a stator and two rotors. Thus, squirrel-cage rotor and slip-ring rotor machines can be assembled and examined. As supplementary equipment (add-on's), rotors are available for synchronous and reluctance machines.
RELUCTANCE MACHINE SE2663-3A
SE2663-3B SE2663-3C 18
instrument has been specially designed to meet these demands. It replaces the use of up to 4 test instruments – it measures current/voltage, power and phase angle all on one instrument. The graphic display is suitable for individual student exercises as well as for demonstration purposes.
Basic set consisting of: stator,, rotors for squirrel-cage and stator slip-ring machines Rotor for synchronous machine Rotor for reluctance machine
M E E
THE TEST INSTRUMENT IS CHARACTERISED BY THE FOLLOWING FEATURES: • Simultan Simultaneous eous measurem measurement ent of voltage and current, independent of wave shape, up to a maximum of 600 V, 20 A (measurement of switched-mode voltages) • Selectable r.m.s. or arithmetic arithmetic measurement measurement • Calculation of active, reactive and apparent apparent powers, and power factor • Measure Measured d values displayed displayed with with the associated associated units
• Electrically indestructibl indestructible e up to 30 A/1000 V • Automat Automatic ic or manual measureme measurement nt range selection selection • Large, high-contrast high-contrast graphic display (5.7") (5.7") with back-lighting • Large-area indication indication or display of up to 4 measured values • RS232 and USB interf interfaces aces • Demonstr Demonstration ation test test instrument instrument for mains mains operation
Order No.: SO5127-1Z 19
DI SMOUN TABL E THR EE-P HASE MACHI NE SET
ANAL OG/ DI GI TAL MULTI METER The subject of electric machines, power electronics and drive engineering places special demands on the measurements used. In addition to an efficient overload protection, the detection of the measured values must be accurate, irrespective of the waveform shapes being measured. The universal test
As an alternative to the standard 0.3 kW machines, the following machines can be assembled and examined using the LN three-phase machine set:
SQUIRREL-CAGE MACHINE
SYNCHRONOUS MACHINE
SLIP-RING MACHINE
instrument has been specially designed to meet these demands. It replaces the use of up to 4 test instruments – it measures current/voltage, power and phase angle all on one instrument. The graphic display is suitable for individual student exercises as well as for demonstration purposes.
The set consists of a standard uniform stator for all types of machine. The rotor is exchangeable. Because of the dismountable assembly, the set is particularly suitable for learning the fundamentals of machine construction and examining the differences between the various types of machine. Cut-away, sectional models are no longer required since, after assembly, the machines are fully-functional and can be coupled to a braking system.
S E N I H C A M C I R T C E L E
The stator is mounted on a black anti-vibration machine base. The terminal box includes connections for the machine at 4 mm safety-protected sockets. Overlay masks adapted for the various machines show a screen-print and the connections. The various rotor types are easily exchanged and no hand tools are required. Protection against thermal overload is achieved by way of temperature sensors. The electric connections to the rotor (slip-ring rotor, synchronous machine) are made via a polarity-protected plug-in connector. All rotating parts can be protected by shaft end guards. The machines conform to the regulations according to DIN VDE 0530 and the protection class IP 20. The basic equipment set includes a stator and two rotors. Thus, squirrel-cage rotor and slip-ring rotor machines can be assembled and examined. As supplementary equipment (add-on's), rotors are available for synchronous and reluctance machines.
RELUCTANCE MACHINE SE2663-3A
SE2663-3B SE2663-3C
Basic set consisting of: stator,, rotors for squirrel-cage and stator slip-ring machines Rotor for synchronous machine Rotor for reluctance machine
M E E
THE TEST INSTRUMENT IS CHARACTERISED BY THE FOLLOWING FEATURES: • Simultan Simultaneous eous measurem measurement ent of voltage and current, independent of wave shape, up to a maximum of 600 V, 20 A (measurement of switched-mode voltages) • Selectable r.m.s. or arithmetic arithmetic measurement measurement • Calculation of active, reactive and apparent apparent powers, and power factor • Measure Measured d values displayed displayed with with the associated associated units
• Electrically indestructibl indestructible e up to 30 A/1000 V • Automat Automatic ic or manual measureme measurement nt range selection selection • Large, high-contrast high-contrast graphic display (5.7") (5.7") with back-lighting • Large-area indication indication or display of up to 4 measured values • RS232 and USB interf interfaces aces • Demonstr Demonstration ation test test instrument instrument for mains mains operation
Order No.: SO5127-1Z
18
19
MAC HI N ES
MACHI NES
DC MULTI-CIRCUIT, COMPOUND WOUND MACHINE
UNIVERSAL MOTOR 0. 3 kW
1 kW
Nominal voltage: Nominal current: Exciter voltage: Exciter current: Nominal speed rpm: Nominal power: Dimensions: (in mm) Weight:
220 V 1/1.2/1.2 A 220 V 100 mA 2000/1800/2000 0.2 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 5.7/6.2/5.8 A 220 V 550 mA 2040/1650/1870 1 kW 520 x 220 x 250 (W x H x D) 21 kg
Nominal voltage*:
Order No.:
SE2662-3D
SE2662-5D
DC SHUNT WOUND MACHINE
0.3 kW
1 kW
Nominal current: Nominal speed: Nominal power: cos phi Dimensions: (in mm) Weight:
220 V–/230 V~, 50 Hz 1.6 A–/2.2 A~ 3000 rpm 0.25 kW 0.65 340 x 210 x 210 (W x H x D) 10 kg
220 V–/230 V~, 50 Hz 8.3 A–/7.8 A~ 4000/3150 rpm 1/0.75 kW 0.78 500 x 210 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3E
SE2662-5E
SINGLE- PHASE REPULSION MOTOR 0. 3 kW
1 kW
Nominal voltage: Nominal current: Exciter voltage: Exciter current: Nominal speed: Nominal power: Dimensions: (in mm) Weight:
220 V 1.4 A 220 V 140 mA 2000 rpm 0.25 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 6.2 A 220 V 240 mA 2100 rpm 1 kW 520 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3A
SE2662-5A
DC SERIES WOUND MACHINE
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi Dimensions: (in mm) Weight:
230 V, 50 Hz 2.7 A 2100 rpm 0.25 kW 0.7 340 x 210 x 210 (W x H x D) 10 kg
230 V, 50 Hz 10.2 A 2900 rpm 1 kW 0.65 500 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3F
SE2662-5F
AC-MOTOR WITH BIFILAR WINDING 0. 3 kW
1 kW
Nominal voltage: Nominal current: Nominal speed: Nominal power: Dimensions: (in mm) Weight:
220 V 1.5 A 2000 rpm 0.25 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 6.5 A 2300 rpm 1 kW 520 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3B
SE2662-5B
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
230 V, 50 Hz 3.6 A 2880 rpm 0.37 kW 0.73 340 x 210 x 210 (W x H x D) 10 kg
230 V, 50 Hz 6.7 A 2870 rpm 0.75 kW 0.77 380 x 220 x 250 (W x H x D) 14 kg
Order No.:
SE2662-3N
SE2662-5N
A T A D L A C I N H C E T
AC-MOTOR WITH STARTING & OPERATING CAPACITOR DC COMPOUND WOUND MACHINE
20
0. 3 kW
1 kW
Nominal voltage: Nominal current: Exciter voltage: Exciter current: Nominal speed: Nominal power: Dimensions: (in mm) Weight:
220 V 1.4 A 220 V 100 mA 2000 rpm 0.25 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 6.4 A 220 V 200 mA 2150 rpm 1 kW 520 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3C
SE2662-5C *other voltages by request
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Capacitor start: Capacitor operation: Dimensions: (in mm) Weight:
230 V, 50 Hz 2.4 A 2815 rpm 0.37 kW 0.96 25 µF 12 µF 340 x 210 x 210 (W x H x D) 9 kg
230 V, 50 Hz 7.3 A 2750 rpm 1.1 kW 0.98 100 µF 25 µF 380 x 220 x 250 (W x H x D) 14 kg
Order No.:
SE2662-3P
SE2662-5P 21
MAC HI N ES
MACHI NES
DC MULTI-CIRCUIT, COMPOUND WOUND MACHINE
UNIVERSAL MOTOR 0. 3 kW
1 kW
Nominal voltage: Nominal current: Exciter voltage: Exciter current: Nominal speed rpm: Nominal power: Dimensions: (in mm) Weight:
220 V 1/1.2/1.2 A 220 V 100 mA 2000/1800/2000 0.2 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 5.7/6.2/5.8 A 220 V 550 mA 2040/1650/1870 1 kW 520 x 220 x 250 (W x H x D) 21 kg
Nominal voltage*:
Order No.:
SE2662-3D
SE2662-5D
DC SHUNT WOUND MACHINE
0.3 kW
1 kW
Nominal current: Nominal speed: Nominal power: cos phi Dimensions: (in mm) Weight:
220 V–/230 V~, 50 Hz 1.6 A–/2.2 A~ 3000 rpm 0.25 kW 0.65 340 x 210 x 210 (W x H x D) 10 kg
220 V–/230 V~, 50 Hz 8.3 A–/7.8 A~ 4000/3150 rpm 1/0.75 kW 0.78 500 x 210 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3E
SE2662-5E
SINGLE- PHASE REPULSION MOTOR 0. 3 kW
1 kW
Nominal voltage: Nominal current: Exciter voltage: Exciter current: Nominal speed: Nominal power: Dimensions: (in mm) Weight:
220 V 1.4 A 220 V 140 mA 2000 rpm 0.25 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 6.2 A 220 V 240 mA 2100 rpm 1 kW 520 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3A
SE2662-5A
DC SERIES WOUND MACHINE
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi Dimensions: (in mm) Weight:
230 V, 50 Hz 2.7 A 2100 rpm 0.25 kW 0.7 340 x 210 x 210 (W x H x D) 10 kg
230 V, 50 Hz 10.2 A 2900 rpm 1 kW 0.65 500 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3F
SE2662-5F
AC-MOTOR WITH BIFILAR WINDING 0. 3 kW
1 kW
Nominal voltage: Nominal current: Nominal speed: Nominal power: Dimensions: (in mm) Weight:
220 V 1.5 A 2000 rpm 0.25 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 6.5 A 2300 rpm 1 kW 520 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3B
SE2662-5B
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
230 V, 50 Hz 3.6 A 2880 rpm 0.37 kW 0.73 340 x 210 x 210 (W x H x D) 10 kg
230 V, 50 Hz 6.7 A 2870 rpm 0.75 kW 0.77 380 x 220 x 250 (W x H x D) 14 kg
Order No.:
SE2662-3N
SE2662-5N
A T A D L A C I N H C E T
AC-MOTOR WITH STARTING & OPERATING CAPACITOR DC COMPOUND WOUND MACHINE 0. 3 kW
1 kW
Nominal voltage: Nominal current: Exciter voltage: Exciter current: Nominal speed: Nominal power: Dimensions: (in mm) Weight:
220 V 1.4 A 220 V 100 mA 2000 rpm 0.25 kW 340 x 210 x 210 (W x H x D) 10 kg
220 V 6.4 A 220 V 200 mA 2150 rpm 1 kW 520 x 220 x 250 (W x H x D) 18 kg
Order No.:
SE2662-3C
SE2662-5C
1 kW
230 V, 50 Hz 2.4 A 2815 rpm 0.37 kW 0.96 25 µF 12 µF 340 x 210 x 210 (W x H x D) 9 kg
230 V, 50 Hz 7.3 A 2750 rpm 1.1 kW 0.98 100 µF 25 µF 380 x 220 x 250 (W x H x D) 14 kg
Order No.:
SE2662-3P
SE2662-5P
*other voltages by request
20
21
MACHINES
MACHI NES
THREE-PHASE ASYNCHRONOUS MOTOR
THREE-PHASE MULTI-FUNCTION MACHINE (SLIP-RING- AND SYNCHRONOUS MACHINE) 0. 3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
690/400 V, 50 Hz 0.81 A/1.73 A 2800 rpm 0.37 kW 0.84 340 x 210 x 210 (W x H x D) 9 kg
690/400 V, 50 Hz 1.4 A/2.4 A 2780 rpm 1 kW 0.83 380 x 220 x 250 (W x H x D) 13 kg
Order No.:
SE2662-3G
SE2662-5G
THREE-PHASE ASYNCHRONOUS MACHINE INDUSTRIAL VERSION 0. 3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
400/230 V, 50 Hz 1.05/1.8 A 1360 rpm 0.37 kW 0.8 340 x 210 x 210 (W x H x D) 9 kg
400/230 V, 50 Hz 2.9/5 A 1400 rpm 1 kW 0.74 380 x 220 x 250 (W x H x D) 14 kg
Order No.:
SE2663-1K
SE2663-1H
1 kW
400 V, 50 Hz
400 V, 50 Hz
(double star connection)
(double star connection)
Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
0.8/1 A 1420/2860 rpm 0.2/0.3 kW 0.62/0.73 340 x 210 x 210 (W x H x D) 9 kg
Order No.:
SE2662-3K
*other voltages by request
400/230 V, 50 Hz 2.0/3.5 A 1400/1500 rpm 0.8 kW 0.75 130 V~/24 V– 4 A~/11 A– 500 x 220 x 250 20 kg
Order No.:
SE2662-3W
SE2662-6W
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Exciter voltage: Exciter current: Dimensions:(inmm) Dimens ions:(inmm) Weight:
400/230 V, 50 Hz 0.66/1.14 A 1500 rpm 0.3 kW 0.97 150 V– 0.95 A– 340 x 210 x 210 10 kg
400/230 V, 50 Hz 1.5/2.6 A 1500 rpm 0.8 kW 0.8 1...0.8 220 V– 1.6 A– 500 x 220 x 250 20 kg
Order No.:
SE2662-3Q
SE2662-5Q
0.3 kW
1 kW
2.4/3 A 1400/2820 rpm 0.75/1.1 kW 0.72/0.8 380 x 220 x 250 (W x H x D) 14 kg
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Exciter voltage: Exciter current: Dimensions:(inmm) Dimens ions:(inmm) Weight:
400/230 V, 50 Hz 0.45/0.7 A 1500 rpm 0.3 kW 1/0.8 140 V– 0.55 A– 360 x 210 x 210 10 kg
400/230 V, 50 Hz 1.6/2.8 A 1500 rpm 0.8 kW 1/0.8 220 V– 0.6 A– 490 x 220 x 250 22 kg
SE2662-5K
Order No.:
SE 2662-3M
SE2662-5M
THREE-PHASE ASYNCHRONOUS MOTOR, POLE CHANGING, TWO SEPARATE WINDINGS 0. 3 kW
1 kW
400V, 50 Hz
400 V, 50 Hz
(double star connection)
(double star connection)
Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
0.57/0.71 A 1380/2750 rpm 0.12/0.25 kW 0.6/0.7 340 x 210 x 210 (W x H x D) 8 kg
2.5/2.7 A 1400/2800 rpm 0.9/1 kW 0.84/0.94 440 x 220 x 250 (W x H x D) 17 kg
Order No.:
SE2662-3L
SE2662-5L
Nominal voltage*:
1 kW
400/230 V, 50 Hz 0.87/1.5 A 1420/1500 rpm 0.27 kW 0.7 107 V~/20 V– 1.7 A~/4 A– 340 x 210 x 210 10 kg
THREE-PHASE SYNCHRONOUS MACHINE WITH SALIENT POLE
0. 3 kW Nominal voltage*:
0.3 kW Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Exciter voltage: Exciter current: Dimensions:(inmm) Dimens ions:(inmm) Weight:
THREE-PHASE SYNCHRONOUS MACHINE WITH SMOOTH-CORE ROTOR
THREE-PHASE ASYNCHRONOUS MOTOR, POLE CHANGING, DAHLANDER
22
0.3 kW Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Capacitor start: Capacitor operation: Dimensions: (in mm) Weight:
A T A D L A C I N H C E T
RELUCTANCE MOTOR
*other voltages by request
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
400/230 V, 50 Hz 2.9/4.9 A 3000 rpm 0.37 kW 0.35 340 x 210 x 210 (W x H x D) 10 kg
400/230 V, 50 Hz 5.2/9 A 3000 rpm 1.3 kW 0.48 380 x 220 x 250 (W x H x D) 12 kg
Order No.:
SE2662-3U
SE2662-5V 23
MACHINES
MACHI NES
THREE-PHASE ASYNCHRONOUS MOTOR
THREE-PHASE MULTI-FUNCTION MACHINE (SLIP-RING- AND SYNCHRONOUS MACHINE) 0. 3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
690/400 V, 50 Hz 0.81 A/1.73 A 2800 rpm 0.37 kW 0.84 340 x 210 x 210 (W x H x D) 9 kg
690/400 V, 50 Hz 1.4 A/2.4 A 2780 rpm 1 kW 0.83 380 x 220 x 250 (W x H x D) 13 kg
Order No.:
SE2662-3G
SE2662-5G
THREE-PHASE ASYNCHRONOUS MACHINE INDUSTRIAL VERSION 0. 3 kW
1 kW
400/230 V, 50 Hz 1.05/1.8 A 1360 rpm 0.37 kW 0.8 340 x 210 x 210 (W x H x D) 9 kg
400/230 V, 50 Hz 2.9/5 A 1400 rpm 1 kW 0.74 380 x 220 x 250 (W x H x D) 14 kg
Order No.:
SE2663-1K
SE2663-1H
THREE-PHASE ASYNCHRONOUS MOTOR, POLE CHANGING, DAHLANDER 1 kW
400 V, 50 Hz
400 V, 50 Hz
Order No.:
SE2662-3W
SE2662-6W
0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Exciter voltage: Exciter current: Dimensions:(inmm) Dimens ions:(inmm) Weight:
400/230 V, 50 Hz 0.66/1.14 A 1500 rpm 0.3 kW 0.97 150 V– 0.95 A– 340 x 210 x 210 10 kg
400/230 V, 50 Hz 1.5/2.6 A 1500 rpm 0.8 kW 0.8 1...0.8 220 V– 1.6 A– 500 x 220 x 250 20 kg
Order No.:
SE2662-3Q
SE2662-5Q
0.3 kW
1 kW
2.4/3 A 1400/2820 rpm 0.75/1.1 kW 0.72/0.8 380 x 220 x 250 (W x H x D) 14 kg
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Exciter voltage: Exciter current: Dimensions:(inmm) Dimens ions:(inmm) Weight:
400/230 V, 50 Hz 0.45/0.7 A 1500 rpm 0.3 kW 1/0.8 140 V– 0.55 A– 360 x 210 x 210 10 kg
(double star connection)
(double star connection)
400/230 V, 50 Hz 1.6/2.8 A 1500 rpm 0.8 kW 1/0.8 220 V– 0.6 A– 490 x 220 x 250 22 kg
Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
0.8/1 A 1420/2860 rpm 0.2/0.3 kW 0.62/0.73 340 x 210 x 210 (W x H x D) 9 kg
Order No.:
SE2662-3K
SE2662-5K
Order No.:
SE 2662-3M
SE2662-5M
THREE-PHASE ASYNCHRONOUS MOTOR, POLE CHANGING, TWO SEPARATE WINDINGS
22
400/230 V, 50 Hz 2.0/3.5 A 1400/1500 rpm 0.8 kW 0.75 130 V~/24 V– 4 A~/11 A– 500 x 220 x 250 20 kg
THREE-PHASE SYNCHRONOUS MACHINE WITH SALIENT POLE
0. 3 kW
0. 3 kW
1 kW
400V, 50 Hz
400 V, 50 Hz
(double star connection)
(double star connection)
Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
0.57/0.71 A 1380/2750 rpm 0.12/0.25 kW 0.6/0.7 340 x 210 x 210 (W x H x D) 8 kg
2.5/2.7 A 1400/2800 rpm 0.9/1 kW 0.84/0.94 440 x 220 x 250 (W x H x D) 17 kg
Order No.:
SE2662-3L
SE2662-5L
Nominal voltage*:
1 kW
400/230 V, 50 Hz 0.87/1.5 A 1420/1500 rpm 0.27 kW 0.7 107 V~/20 V– 1.7 A~/4 A– 340 x 210 x 210 10 kg
THREE-PHASE SYNCHRONOUS MACHINE WITH SMOOTH-CORE ROTOR
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
Nominal voltage*:
0.3 kW Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Exciter voltage: Exciter current: Dimensions:(inmm) Dimens ions:(inmm) Weight:
RELUCTANCE MOTOR 0.3 kW
1 kW
Nominal voltage*: Nominal current: Nominal speed: Nominal power: cos phi: Dimensions: (in mm) Weight:
400/230 V, 50 Hz 2.9/4.9 A 3000 rpm 0.37 kW 0.35 340 x 210 x 210 (W x H x D) 10 kg
400/230 V, 50 Hz 5.2/9 A 3000 rpm 1.3 kW 0.48 380 x 220 x 250 (W x H x D) 12 kg
Order No.:
SE2662-3U
SE2662-5V
*other voltages by request
*other voltages by request
MAC HI N ES
TR ANSF OR MER S
RUBBER COUPLING SLEEVE
SINGLE-PHASE ISOLATING TRANSFORMER 300 VA Rubber coupling sleeve used for the coupling of two machines; permits rapid and safe assembly; designed with internal ring gear.
0. 1/0. 3 kW
1 kW
Material: Dimensions: (in mm): Weight:
rubber (neoprene) 40 x 45 (length x diameter) 0.1 kg
rubber (neoprene) 40 x 58 (length x diameter) 0.1 kg
Order No.:
SE2662-2A
SE2662-6A
A T A D L A C I N H C E T
23
Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
230 V, 50/60 Hz 115/230 V 300 VA 227 x 245 x 280 (W x H x D) table-top unit 4 kg
Order No.:
SE2662-4Q
SINGLE-PHASE TOROIDAL ISOLATING TRANSFORMER 300 VA
COUPLING GUARD Attachable metal guards used to protect against accidental physical contact with the coupling location where rotation occurs between two coupled machines.
0. 1/0. 3 kW
1 kW
Dimensions: (in mm) Weight:
black steel plate, folded with function plug 115 x 90 x 60 (H x W x D) 0.1 kg
black steel plate, folded with function plug 140 x 75 x 80 (H x W x D) 0.1 kg
Order No.:
SE2662-2B
SE2662-6B
Material:
SHAFT END GUARD
Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
230 V, 50/60 Hz 115/230 V 300 VA 227 x 245 x 280 (W x H x D) table-top unit 4 kg
Order No.:
SE2662-4U
SINGLE-PHASE ECONOMYTRANSFORMER (AUTO-TRANSFORMER) 300 VA Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
230 V, 50/60 Hz 115/230/250 V 300 VA 227 x 245 x 280 (W x H x D) table-top unit 4 kg
Order No.:
SE2662-4S
A T A D L A C I N H C E T
Pluggable metal cover for protection against rotating shaft ends of motors or generators.
0. 1/0. 3 kW
1 kW
Dimensions: (in mm) Weight:
black steel plate, folded, closed at the sides with drilled panel and function plug 115 x 90 x 30 (H x W x D) 0.1 kg
black steel plate, folded, closed at the sides with drilled panel and function plug 140 x 75 x 40 (H x W x D) 0.1 kg
Order No.:
SE2662-2C
SE2662-6C
Material:
24
THREE-PHASE ISOLATING TRANSFORMER 300 VA Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
3 x 400/230 V, 50/60 Hz 3 x 115/230 V 300 VA 460 x 245 x 280 (W x H x D) table-top unit 10 kg
Order No.:
SE2662-4R
25
MAC HI N ES
TR ANSF OR MER S
RUBBER COUPLING SLEEVE
SINGLE-PHASE ISOLATING TRANSFORMER 300 VA Rubber coupling sleeve used for the coupling of two machines; permits rapid and safe assembly; designed with internal ring gear.
0. 1/0. 3 kW
1 kW
Material: Dimensions: (in mm): Weight:
rubber (neoprene) 40 x 45 (length x diameter) 0.1 kg
rubber (neoprene) 40 x 58 (length x diameter) 0.1 kg
Order No.:
SE2662-2A
SE2662-6A
Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
230 V, 50/60 Hz 115/230 V 300 VA 227 x 245 x 280 (W x H x D) table-top unit 4 kg
Order No.:
SE2662-4Q
SINGLE-PHASE TOROIDAL ISOLATING TRANSFORMER 300 VA
COUPLING GUARD Attachable metal guards used to protect against accidental physical contact with the coupling location where rotation occurs between two coupled machines.
0. 1/0. 3 kW
1 kW
Dimensions: (in mm) Weight:
black steel plate, folded with function plug 115 x 90 x 60 (H x W x D) 0.1 kg
black steel plate, folded with function plug 140 x 75 x 80 (H x W x D) 0.1 kg
Order No.:
SE2662-2B
SE2662-6B
Material:
Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
230 V, 50/60 Hz 115/230 V 300 VA 227 x 245 x 280 (W x H x D) table-top unit 4 kg
Order No.:
SE2662-4U
SINGLE-PHASE ECONOMYTRANSFORMER (AUTO-TRANSFORMER) 300 VA
SHAFT END GUARD
Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
230 V, 50/60 Hz 115/230/250 V 300 VA 227 x 245 x 280 (W x H x D) table-top unit 4 kg
Order No.:
SE2662-4S
A T A D L A C I N H C E T
Pluggable metal cover for protection against rotating shaft ends of motors or generators.
0. 1/0. 3 kW
1 kW
Dimensions: (in mm) Weight:
black steel plate, folded, closed at the sides with drilled panel and function plug 115 x 90 x 30 (H x W x D) 0.1 kg
black steel plate, folded, closed at the sides with drilled panel and function plug 140 x 75 x 40 (H x W x D) 0.1 kg
Order No.:
SE2662-2C
SE2662-6C
Material:
THREE-PHASE ISOLATING TRANSFORMER 300 VA Input voltage: Output voltage: Power: Dimensions: (in mm) Weight:
3 x 400/230 V, 50/60 Hz 3 x 115/230 V 300 VA 460 x 245 x 280 (W x H x D) table-top unit 10 kg
Order No.:
SE2662-4R
24
25
S W I TC H G E A R
P OWER S UP PL I ES
CUT-OUT SWITCH, 4 POLE
THREE-PHASE SUPPLY 400 V/16 A WITH E.L.C.B. CIRCUIT BREAKER Switch position: Contact rating: Dimensions: Weight:
0–1 (Rotary switch) 660 V, 12 A 297 x 114 x 140 mm (H x W x D) 0.8 kg
Mains voltage supply for single and three-phase circuits with built-in equipment protection and shock-hazard protection as well as three-phase plug for connection of additional three-phase loads.
Order No.:
SO3212-1W
Safety devices include:
Mains output: Dimensions: Weight:
Motor protecting switch adjustable from 6.3...16 A,Undervoltage trip, e.l.c.b. circuit breaker 30 mA, EMERGENCY-OFF GENCY -OFF pushbutton, Key-operated ON switch (two-handed operation) 3 x 230/400 V, 50 Hz via CEE plug with 1.8m cable 5 savety sockets 4 mm (L1, L2, L3, N, PE) CEE socket 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO3212-1B
Mains connection*: Outputs:
STAR-DELTA SWITCH Switch position: Contact rating: Dimensions: Weight:
O–Y–∆ (Rotary switch) 660 V, 20 A 297 x 114 x140 mm (H x W x D) 0.8 kg
Order No.:
SO3212-2D DC POWER SUPPLY, 0...250 V/10 A STABILISED DC power supply for armature and field windings of DC machines up to 1.5 kW is stabilised and electronically protected against overload and short-circuit Output voltage:
Output current: Mains connection*: Dimensions: Weight:
Controllable output voltage using thyristor half-bridge Electrical isolation between the control and the load-side Fuses: 3 fuse links 10 A, 240 V, 0...240 V– variable and 210 V–, 6 A fixed 3...10 A (adjustable current limitation) 230/400 V, 50 Hz via CEE plug 297 x 228 x 140 mm (H x W x D) 3 kg
Order No.:
SO3212-5W
POLE REVERSER DAHLANDER/ POLE REVERSER TWO SEPARATE WINDINGS 3-stage rotary switch for speed setting of three-phase motors with two separate windings. Switch position: 0–1–2 (Rotary switch) Contact rating: 500 V, 16 A Dimensions: 297 x 114 x 140 mm (H x W x D) Weight: 0.8 kg Pole reverser: Dahlander
Order No.:
SO3212-2H
Pole reverser:
two separate windings
Order No.:
SO3212-2K
A T A D L A C I N H C E T
VARIABLE ISOLATING TRANSFORMER/EXCITER 0...230 V MOTOR PROTECTION SWITCH 3-POL. 0.4...0.63 A/1...1.6 A/1.6...2.5 A
26
Power circuit breaker incorporating thermal overload trip and undelayed overcurrent trip. Switch position: 500 V, 10 A Contact rating: 0.4...0.63 A adjustable Dimensions: 297 x 114 x 125 mm (H x W x D) Weight: 1 kg
Variable isolating transformer as exciter 0...230 V for field excitation of DC, synchronous and multi-function machines.
Order No.:
SO3212-1J
Mains connection*:
Contact rating:
1.0...1.6 A adjustable
Order No.:
SO3212-1N
Contact rating:
1.6...2.5 A adjustable
Dimensions: Weight:
0...230 V, 0.8 A ~/– 0...120 V, 1.6 A ~/– 0...40 V, 2.5 A ~/– Voltage supply: 230 V, 50 Hz via mains cable 297 x 114 x 125 mm (H x W x D) 6.5 kg
Order No.:
SO3212-1P
Order No.:
SO3212-5K
Output voltage:
*other voltages by request
27
S W I TC H G E A R
P OWER S UP PL I ES
CUT-OUT SWITCH, 4 POLE
THREE-PHASE SUPPLY 400 V/16 A WITH E.L.C.B. CIRCUIT BREAKER Switch position: Contact rating: Dimensions: Weight:
0–1 (Rotary switch) 660 V, 12 A 297 x 114 x 140 mm (H x W x D) 0.8 kg
Mains voltage supply for single and three-phase circuits with built-in equipment protection and shock-hazard protection as well as three-phase plug for connection of additional three-phase loads.
Order No.:
SO3212-1W
Safety devices include:
Mains output: Dimensions: Weight:
Motor protecting switch adjustable from 6.3...16 A,Undervoltage trip, e.l.c.b. circuit breaker 30 mA, EMERGENCY-OFF GENCY -OFF pushbutton, Key-operated ON switch (two-handed operation) 3 x 230/400 V, 50 Hz via CEE plug with 1.8m cable 5 savety sockets 4 mm (L1, L2, L3, N, PE) CEE socket 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO3212-1B
Mains connection*: Outputs:
STAR-DELTA SWITCH Switch position: Contact rating: Dimensions: Weight:
O–Y–∆ (Rotary switch) 660 V, 20 A 297 x 114 x140 mm (H x W x D) 0.8 kg
Order No.:
SO3212-2D DC POWER SUPPLY, 0...250 V/10 A STABILISED DC power supply for armature and field windings of DC machines up to 1.5 kW is stabilised and electronically protected against overload and short-circuit Output voltage:
Output current: Mains connection*: Dimensions: Weight:
Controllable output voltage using thyristor half-bridge Electrical isolation between the control and the load-side Fuses: 3 fuse links 10 A, 240 V, 0...240 V– variable and 210 V–, 6 A fixed 3...10 A (adjustable current limitation) 230/400 V, 50 Hz via CEE plug 297 x 228 x 140 mm (H x W x D) 3 kg
Order No.:
SO3212-5W
POLE REVERSER DAHLANDER/ POLE REVERSER TWO SEPARATE WINDINGS 3-stage rotary switch for speed setting of three-phase motors with two separate windings. Switch position: 0–1–2 (Rotary switch) Contact rating: 500 V, 16 A Dimensions: 297 x 114 x 140 mm (H x W x D) Weight: 0.8 kg Pole reverser: Dahlander
Order No.:
SO3212-2H
Pole reverser:
two separate windings
Order No.:
SO3212-2K
A T A D L A C I N H C E T
VARIABLE ISOLATING TRANSFORMER/EXCITER 0...230 V MOTOR PROTECTION SWITCH 3-POL. 0.4...0.63 A/1...1.6 A/1.6...2.5 A Power circuit breaker incorporating thermal overload trip and undelayed overcurrent trip. Switch position: 500 V, 10 A Contact rating: 0.4...0.63 A adjustable Dimensions: 297 x 114 x 125 mm (H x W x D) Weight: 1 kg
Variable isolating transformer as exciter 0...230 V for field excitation of DC, synchronous and multi-function machines.
Order No.:
SO3212-1J
Mains connection*:
Contact rating:
1.0...1.6 A adjustable
Order No.:
SO3212-1N
Contact rating:
1.6...2.5 A adjustable
Dimensions: Weight:
0...230 V, 0.8 A ~/– 0...120 V, 1.6 A ~/– 0...40 V, 2.5 A ~/– Voltage supply: 230 V, 50 Hz via mains cable 297 x 114 x 125 mm (H x W x D) 6.5 kg
Order No.:
SO3212-1P
Order No.:
SO3212-5K
Output voltage:
*other voltages by request
26
27
TE S T I N S T R U M E N T S
T E S T I N S T R U ME N T S
LARGE-SCALE TRUE R.M.S. METER
LARGE-SCALE WATTMETER
Active analog moving-coil instrument (RMS meter) for current and voltage measurement. Electrically indestructable up to 1000 V and up to 30 A.
Electrically indestructible up to 1000 V and 30 A. Display:
Measurement modes:
Power supply*: Dimensions: Weight:
Total rms value (RMS-AC+DC) Ripple rms value (RMS-AC) Arithmetic mean value (AV (AV-AC+DC) -AC+DC) moving-coil instrument class 1.5/2 Scale 1: measurement range 0–10 Scale 2: measurement range 0–3 Internal resistance: current path 10 mohm, voltage path 10 Mohm Voltage ranges: 3; 10; 30; 100; 300; 1000 V Current ranges: 0.1; 0.3; 1; 3; 10; 30 A Crest factor: 10 Measurement accuracy: 2 % 230 V, 50 Hz 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO5127-1L
Display:
Power supply*: Dimensions: Weight:
Overload resistant for current and voltage signals Permanent moving coil instrument class 1.5/double scales Scale 1: measurement range 0...10 Scale 2: measurement range 0...3 Active-reactive power measurement from 0.3 W (Var) up to 30 kW (kVar) Internal resistance: current path 10 mohm, voltage path 10 Mohm Crest factor: 2 Measurement accuracy: 2 % Outputs for oscilloscope 230 V, 50 Hz 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO5127-1R
SYNCHRONIZING PANEL LARGE-SCALE POWER FACTOR AND PHASE ANGLEMETER The synchronising panel (3 lamps) is used to display voltage and phase angles between generator and power supply circuit (light-dark indication).
Electrically indestructible up to 1000 V and 30 A. Display:
Power supply*: Dimensions: Weight:
Permanent moving coil instrument class 1.5 / double scale Scale 1: Measurement range cos-phi: 0 cap over 1 to 0 ind Scale 2: Measurement range phase angle: angl e: 90° cap over 0 up up to 90° ind. No current - voltage range switchover Internal resistance: current path 10 mohm, voltage path 10 Mohm Measurement range: cos-phi: 0 cap. over 1 up to 0 ind., phase angle: 90° cap. over over 0 up to to 90° ind. Measurement accuracy: 3 % 230 V, 50 Hz 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO5127-1M
Operating voltage*: Dimensions: Weight:
400 V 297 x 114 x 125 mm (H x W x D) 1 kg
Order No.:
SO3212-6T
SYNCHRONOSCOPE (96 X 96 MM) The synchronoscope with rotation indicator for phase angle comparison of three-phase or single-phase power supply. If the machine runs too fast or too slowly, the rotation indicator turns clockwise or counterclockwise. If the phase angles coincide the indicator assumes the center position. Nominal voltage*: Cyclic duration factor: Movement:
28
*other voltages by request
A T A D L A C I N H C E T
*other voltages by request
Dimensions: Weight:
400 V 15 min. air-core electrodynamic quotient movement 297 x 228 x 125 mm (H x W x D) 1 kg
Order No.:
SO3213-1J 29
TE S T I N S T R U M E N T S
T E S T I N S T R U ME N T S
LARGE-SCALE TRUE R.M.S. METER
LARGE-SCALE WATTMETER
Active analog moving-coil instrument (RMS meter) for current and voltage measurement. Electrically indestructable up to 1000 V and up to 30 A.
Electrically indestructible up to 1000 V and 30 A. Display:
Measurement modes:
Power supply*: Dimensions: Weight:
Total rms value (RMS-AC+DC) Ripple rms value (RMS-AC) Arithmetic mean value (AV (AV-AC+DC) -AC+DC) moving-coil instrument class 1.5/2 Scale 1: measurement range 0–10 Scale 2: measurement range 0–3 Internal resistance: current path 10 mohm, voltage path 10 Mohm Voltage ranges: 3; 10; 30; 100; 300; 1000 V Current ranges: 0.1; 0.3; 1; 3; 10; 30 A Crest factor: 10 Measurement accuracy: 2 % 230 V, 50 Hz 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO5127-1L
Display:
Power supply*: Dimensions: Weight:
Overload resistant for current and voltage signals Permanent moving coil instrument class 1.5/double scales Scale 1: measurement range 0...10 Scale 2: measurement range 0...3 Active-reactive power measurement from 0.3 W (Var) up to 30 kW (kVar) Internal resistance: current path 10 mohm, voltage path 10 Mohm Crest factor: 2 Measurement accuracy: 2 % Outputs for oscilloscope 230 V, 50 Hz 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO5127-1R
SYNCHRONIZING PANEL LARGE-SCALE POWER FACTOR AND PHASE ANGLEMETER The synchronising panel (3 lamps) is used to display voltage and phase angles between generator and power supply circuit (light-dark indication).
Electrically indestructible up to 1000 V and 30 A. Display:
Power supply*: Dimensions: Weight:
Permanent moving coil instrument class 1.5 / double scale Scale 1: Measurement range cos-phi: 0 cap over 1 to 0 ind Scale 2: Measurement range phase angle: angl e: 90° cap over 0 up up to 90° ind. No current - voltage range switchover Internal resistance: current path 10 mohm, voltage path 10 Mohm Measurement range: cos-phi: 0 cap. over 1 up to 0 ind., phase angle: 90° cap. over over 0 up to to 90° ind. Measurement accuracy: 3 % 230 V, 50 Hz 297 x 228 x 140 mm (H x W x D) 2 kg
Order No.:
SO5127-1M
Operating voltage*: Dimensions: Weight:
400 V 297 x 114 x 125 mm (H x W x D) 1 kg
Order No.:
SO3212-6T
SYNCHRONOSCOPE (96 X 96 MM) The synchronoscope with rotation indicator for phase angle comparison of three-phase or single-phase power supply. If the machine runs too fast or too slowly, the rotation indicator turns clockwise or counterclockwise. If the phase angles coincide the indicator assumes the center position. Nominal voltage*: Cyclic duration factor: Movement:
28
Order No.:
SO3213-1J
*other voltages by request
STARTER S/ R EGUL ATOR S
S TARTER S/ REGU LATO RS
STARTER FOR DC-MOTORS
LOAD RESISTOR FOR SYNCHRONOUS GENERATOR 0. 3 kW
1 kW
Dimensions: (in mm) Weight:
0...47 ohm, linear continuously adjustable max. 1.6 A 120 W suitable for speed setting of 50 % under full torque 297 x 114 x 125 (H x W x D) 1.4 kg
0...16 ohm, linear continuously continuousl y adjustable max. 7 A 250 W suitable for speed setting of 50 % under full torque 297 x 114 x 125 (H x W x D) 2.8 kg
Order No.:
SO3212-6B
SO3213-6B
Current: Nominal power:
FIELD REGULATOR FOR DC MACHINES
29
0.3 kW
1 kW
Nominal power: Cyclic duration factor: Dimensions: (in mm) Weight:
3 x 0.8...5 kohm continuously continuousl y adjustable 3 x 100 W 70 % 297 x 228 x 125 (H x W x D) 2.7 kg
3 x 0.25...2.5 kohm continuously adjustable 3 x 200 W 70 % 430 x 160 x 275 WxHxD 3.8 kg
Order No.:
SO3212-6R
SE2662-6K
0.3 kW
1 kW 3 x 0...6 ohm adjustable in 6 steps 27 A 6% 297 x 228 x 125 (H x W x D) 6 kg
SO3212-6D
Resistance:
STARTER FOR SLIPRING MOTORS 0. 3 kW
1 kW 0...680 ohm, linear continuously continuousl y adjustable max. 270 mA 40 W 297 x 114 x 50 (H x W x D) 2 kg
Resistance:
Current: Nominal power: Dimensions: (in mm) Weight:
0...2.2 kohm, linear continuously adjustable max. 110 mA 30 W 297 x 114 x 50 (H x W x D) 2 kg
Current: Cyclic duration factor: Dimensions: (in mm) Weight:
3 x 0...4 ohm adjustable in 6 steps max. 3.3 A 50 % 297 x 228 x 125 (H x W x D) 3 kg
Order No.:
SO3212-5F
SO3213-6F
Order No.:
SO3212-5C
Resitance:
FIELD REGULATOR FOR GENERATORS
RECTIFIER 250 V/10 A 0. 3 kW
1 kW
Rectifier in bridge circuit with automatic circuit breaker.
Current: Nominal power: Dimensions: (in mm) Weight:
0...2.2 kohm, linear continuously adjustable max. 95 mA 20 W 297 x 114 x 50 (H x W x D) 2 kg
0...4.7 kohm, linear continuously continuousl y adjustable max. 130 mA 80 W 297 x 114 x 50 (H x W x D) 2 kg
Input voltage: Output current: Dimensions: (in mm) Weight:
max. 230 V, 50 Hz max. 10 A 297 x 114 x 140 (H x W x D) 1.8 kg
Order No.:
SO3538-9P
Order No.:
SO3212-5H
SO3213-6H
Resistance:
LOAD RESISTOR
A T A D L A C I N H C E T
COMPENSATION UNIT Load resistor for generator experiments.
The compensation unit is used for step-by-step reactive power compensation of a three-phase asynchronous machine.
0. 3 kW
1 kW
Current: Nominal power: Dimensions: (in mm) Weight:
0...1 kohm continuously adjustable max. 4 A 300 W 297 x 228 x 125 (H x W x D) 2.7 kg
0...440 ohm continuously continuousl y adjustable max. 6 A 1.4 kW 229 x 298 x 150 (H x W x D) 4.4 kg
Order No.:
SO3212-6M
SE2662-6J
Resistance:
30
Dimensions: Weight:
400 V 15 min. air-core electrodynamic quotient movement 297 x 228 x 125 mm (H x W x D) 1 kg
*other voltages by request
Resistance:
A T A D L A C I N H C E T
Capacitors: Dimensions: (in mm) Weight:
6 x 1 µF, 450 V 297 x 114 x 140 mm (H x W x D) 1.0 kg
Order No.:
SO3212-6E
31
STARTER S/ R EGUL ATOR S
S TARTER S/ REGU LATO RS
STARTER FOR DC-MOTORS
LOAD RESISTOR FOR SYNCHRONOUS GENERATOR 0. 3 kW
1 kW
Dimensions: (in mm) Weight:
0...47 ohm, linear continuously adjustable max. 1.6 A 120 W suitable for speed setting of 50 % under full torque 297 x 114 x 125 (H x W x D) 1.4 kg
0...16 ohm, linear continuously continuousl y adjustable max. 7 A 250 W suitable for speed setting of 50 % under full torque 297 x 114 x 125 (H x W x D) 2.8 kg
Order No.:
SO3212-6B
SO3213-6B
Resistance: Current: Nominal power:
FIELD REGULATOR FOR DC MACHINES
0.3 kW
1 kW
Nominal power: Cyclic duration factor: Dimensions: (in mm) Weight:
3 x 0.8...5 kohm continuously continuousl y adjustable 3 x 100 W 70 % 297 x 228 x 125 (H x W x D) 2.7 kg
3 x 0.25...2.5 kohm continuously adjustable 3 x 200 W 70 % 430 x 160 x 275 WxHxD 3.8 kg
Order No.:
SO3212-6R
SE2662-6K
0.3 kW
1 kW 3 x 0...6 ohm adjustable in 6 steps 27 A 6% 297 x 228 x 125 (H x W x D) 6 kg
SO3212-6D
Resistance:
STARTER FOR SLIPRING MOTORS 0. 3 kW
1 kW 0...680 ohm, linear continuously continuousl y adjustable max. 270 mA 40 W 297 x 114 x 50 (H x W x D) 2 kg
Resistance:
Current: Nominal power: Dimensions: (in mm) Weight:
0...2.2 kohm, linear continuously adjustable max. 110 mA 30 W 297 x 114 x 50 (H x W x D) 2 kg
Current: Cyclic duration factor: Dimensions: (in mm) Weight:
3 x 0...4 ohm adjustable in 6 steps max. 3.3 A 50 % 297 x 228 x 125 (H x W x D) 3 kg
Order No.:
SO3212-5F
SO3213-6F
Order No.:
SO3212-5C
Resitance:
FIELD REGULATOR FOR GENERATORS
RECTIFIER 250 V/10 A 0. 3 kW
1 kW
Rectifier in bridge circuit with automatic circuit breaker.
Current: Nominal power: Dimensions: (in mm) Weight:
0...2.2 kohm, linear continuously adjustable max. 95 mA 20 W 297 x 114 x 50 (H x W x D) 2 kg
0...4.7 kohm, linear continuously continuousl y adjustable max. 130 mA 80 W 297 x 114 x 50 (H x W x D) 2 kg
Input voltage: Output current: Dimensions: (in mm) Weight:
max. 230 V, 50 Hz max. 10 A 297 x 114 x 140 (H x W x D) 1.8 kg
Order No.:
SO3538-9P
Order No.:
SO3212-5H
SO3213-6H
Resistance:
LOAD RESISTOR
A T A D L A C I N H C E T
COMPENSATION UNIT Load resistor for generator experiments.
The compensation unit is used for step-by-step reactive power compensation of a three-phase asynchronous machine.
0. 3 kW
1 kW
Current: Nominal power: Dimensions: (in mm) Weight:
0...1 kohm continuously adjustable max. 4 A 300 W 297 x 228 x 125 (H x W x D) 2.7 kg
0...440 ohm continuously continuousl y adjustable max. 6 A 1.4 kW 229 x 298 x 150 (H x W x D) 4.4 kg
Order No.:
SO3212-6M
SE2662-6J
Resistance:
30
Capacitors: Dimensions: (in mm) Weight:
6 x 1 µF, 450 V 297 x 114 x 140 mm (H x W x D) 1.0 kg
Order No.:
SO3212-6E
31
The Lucas-Nülle GmbH company is based in Germany and can be contacted at the address given below. The company also has representatives throughout the world, thus ensuring a fast and effective advice service before purchasing, as well as an efficient network of after-sales service centres.
We can be contacted directly at our head office in KerpenSindorf, Germany, or via one of our representatives, at either of the adresses given below.
Lucas-Nülle Lehr- und Messgeräte GmbH Head adqu quat ate ers rs::
Sieme Sie men nss sstr traß aße e2 50170 Kerpen-Sindorf
Postal address address::
Postfach 1140 50140 Kerpen
Exp Ex port sal sale es:
Tel. l.:: +49 +49-2 -22 2 73/ 3/5 5 67 67-6 -66 6 Fax: +49+49-22 22 73/567-39 E-Mail: E-Ma il:
[email protected] om
The Lucas-Nülle GmbH company is based in Germany and can be contacted at the address given below. The company also has representatives throughout the world, thus ensuring a fast and effective advice service before purchasing, as well as an efficient network of after-sales service centres.
We can be contacted directly at our head office in KerpenSindorf, Germany, or via one of our representatives, at either of the adresses given below.
Lucas-Nülle Lehr- und Messgeräte GmbH Head adqu quat ate ers rs::
Sieme Sie men nss sstr traß aße e2 50170 Kerpen-Sindorf
Postal address address::
Postfach 1140 50140 Kerpen
Exp Ex port sal sale es:
Tel. l.:: +49 +49-2 -22 2 73/ 3/5 5 67 67-6 -66 6 Fax: +49+49-22 22 73/567-39 E-Mail: E-Ma il:
[email protected] om
) y n a m r e G n i
Your LN Sales Partner
www.lucas-nuelle.com No liabilities are given or implied for the specification and photographs printed in this catalogue. Technical alterations reserved.
d e t n i r P ( B G 1 2 0 / 4 0 M E E 4 2 5 P : . r N . f e R