Draft_2009

N 1000 R 12 DRAFT

doc. nr. ISO/TC 8 date total pages

2007-10-25 80 supersedes document R 11

Secretariat: Twinning: SAC / DIN

Secretary: Li, Yanqing [email protected]

ISO/TC 8 “Ships and marine technology” Status report ISO/TC 8 Ships and marine technology...........................................................................................................3 ISO/TC 8 Advisory Group (AG) ..........................................................................................................................6 ISO/TC 8/SC 1 Lifesaving and fire protection..................................................................................................7 ISO/TC 8/SC 2 Marine environment protection............................................................................................12 ISO/TC 8/SC 3 Piping and machinery ............................................................................................................16 ISO/TC 8/SC 4 Outfitting and deck machinery............................................................................................22 ISO/TC 8/SC 6 Navigation .................................................................................................................................25 ISO/TC 8/SC 7 Inland navigation vessels.......................................................................................................29 ISO/TC 8/SC 8 Structures....................................................................................................................................32 ISO/TC 8/SC 9 General requirements.............................................................................................................35 ISO/TC 8/SC 10 Computer applications ........................................................................................................37 ISO/TC 8/SC 11 Intermodal and short sea shipping....................................................................................39 ISO/TC 8/SC 12 Large Yachts ...........................................................................................................................40 Annex A List of IMO-link-NR’s ........................................................................................................................41 Annex B Index on IMO Resolutions .............................................................................................................51 Annex C Index on ISO standard numbers .................................................................................................53 Annex D The allocation of the numbers of work items to the Sub Committees................................63 Annex E The IMO-link-NR's are assigned to the ISO/TC 8 Subcommittees and IMO bodies........64 Annex F Explanation of current stage abbreviation ...............................................................................65 Annex G Participation table...........................................................................................................................67 Annex H Sub Committee Chairman/Secretary........................................................................................77 Annex I Liaison list for ISO/TC 8 and TC 8 Subcommittees....................................................................78

ISO/TC8 N1000 R12 Status report page 2

General introduction This “living” comprehensive document is regularly updated, based upon information collected from documents and reports from the Sub Committees and Working Groups. The permanent document number ISO/TC 8 N 1000 will be retained, also for future revisions of this document (to be indicated by R 1, R 2 etc.). The current version of this document is Appendix 1 “Work programme details” to the ISO/TC 8 Business Plan. Scope, structure and programme of work of ISO/TC 8 and subcommittees This part of the document contains the scopes and structure of ISO/TC 8 and its subcommittees, as well as the allocation of existing standards and (proposed) work items to these SC’s and WG’s. A distinction is made between “Registered Work Items” that are formally approved and registered in the program of work of ISO and “Possible new work items”. These “Possible new work items” can range from just suggestion that some item could be worthwhile studying (Preliminary stage) up to items for which a new project is under review (Proposal Stage). For ease of reference all items have been given an internal ISO/TC 8 work item number e.g. [01.01], indicating the SC and a two digit reference number. Annex D gives some statistical information on the number of work items assigned to each ISO/TC 8 subcommittee. Work items of mutual interest to IMO and ISO/TC8 Several work items are regarded to be of mutual interest to ISO/TC 8 and the International Maritime Organization IMO. These items are either requested by IMO or are initiated by ISO/TC 8 itself. These items are indicated by an IMO-link –NR. The IMO-link-NR refers to the list in Annex A of this document. The relevant IMO Resolutions and the titles of subjects are given in Annex B. Further Annexes Annex C : index on ISO standard numbers with references to the internal ISO/TC 8 work item number and the IMO-link-NR. Annex E : assignment of IMO-link-NR’s to the different ISO/TC 8 and IMO bodies, thus indicating the major fields of common interest. Annex F : explanation of ISO stage codes. Annex G : Table of the participating and observing Countries within ISO/TC 8 and its SCs. Annex H : List of the Chairmen and the Secretaries in TC8/Subcommittees. World Wide Web An electronic version of this document is to be found on site: http:isotc.iso.ch/livelink/livelink

TC8 General information


ISO/TC 8 Ships and marine technology Chairman: Secretariat:

Capt. Charles H. Piersall (USA) (1995 - 2009) Mr. Yanqing Li (SAC)

Scope: Standardization of design, construction, structural elements, outfitting parts, equipment, methods and technology, and marine environmental matters, used in shipbuilding and the operation of ships, comprising sea-going ships, vessels for inland navigation, offshore structures, ship-to-shore interface and all other marine structures subject to IMO requirements. Excluded: - electrical and electronic equipment on board ships and marine structures (IEC/TC 18 and IEC/TC 80); - internal combustion engines (ISO/TC 70); - offshore structures for petroleum and natural gas industries, including procedures for assessment of the site specific application of mobile offshore drilling and accommodation units for the petroleum and natural gas industry (ISO/TC 67/SC 7); - steel and aluminium structures (ISO/TC 167); - equipment and construction details of recreational craft and other small craft (not being lifeboats and lifesaving equipment) less than 24 metres overall length (ISO/TC 188); - sea bed mining; - equipment which is not specific for use on board ships and marine structures (e.g. pipes, steel wire ropes, etc.) and falling within the scope of particular ISO technical committees with which a regular mutual liaison must be maintained.

Meetings 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26)

1949-06 1952-11 1956-11 1960-10 1964-10 1967-06 1970-10 1973-10/11 1977-06 1980-11 1985-07-04/05 1990-10-15/18 1994-09-08/11 1995-10-13/15 1996-10-14/16 1997-10-21/22 1998-10-11/13 1999-10-20/21 2000-10-24/25 2001-10-23/24 2002-10-23/24 2003-10-21/22 2004-10-20/21 2005-10-25/26 2006-10-17/18 2007-10-31 – 11-01

Report Paris, France the Hague, Netherlands Genoa, Italy Düsseldorf, Germany Brussels, Belgium Moscow, USSR London, UK Tokyo, Japan Goteborg, Sweden Gdansk, Poland Paris, France Tokyo, Japan Norway Beijing, China Cascais, Portugal Hamburg, Germany Maldon, United Kingdom Tokyo, Japan Gdansk, Poland Roseau, Dominica Busan, Rep. of Korea Panama , Rep. of Panama Dalian, China New York, USA Hamburg, Germany Santa Cruz de Tenerife, Spain

8 N 782 8 N 840 8 N 872 8 N 900 8 N 914 8 N 930 8 N 942 8 N 953 8 N 964 8 N 971 8 N 979 8 N 986 8 N 998 8 N 1012 8N

Working Group : WG 1 Ship Recycling (Convener : CAPT Charles Piersall, Secretary: Mrs. Maja Buntrock) Work items assigned to WG 1 : [00.04], [00.05], [00.06], [00.07], [00.08], [00.09], [00.10], [00.11 ] WG 1 Meetings: 1) 2007-09-12/13

Washington


Possible new work items: 2 ISO 30006, Ship recycling management systems – Guidelines on surveying of ships for hazardous materials and minimum amount or content of hazardous materials to be reported ( Stage 00.00 ) ISO 30007 Ship recycling management systems – Methods to remove asbestos in ships (Stage 00.00 ) Preparatory Stage: 6 [ 00.04 ] [ 00.05 ] [ 00.06 ] [ 00.07 ] [ 00.08 ] [ 00.09 ]

ISO 30000, Ship recycling management systems - Specifications for management systems for safe and environmentally sound ship recycling facilities ( Stage 20.20 ) ISO 30001, Ship recycling management systems - Best practice for ship recycling facilities - Assessment and plans ( Stage 20.00 ) ISO 30002, Ship recycling management systems - Guidelines for selection of ship recyclers (and pro forma contract) ( Stage 20.00 ) ISO 30003, Ship recycling management systems - Requirements for bodies providing audit and certification of ship recycling management systems ( Stage 20.00 ) ISO 30004, Ship recycling management systems - Guidelines for implementing ISO 30000 ( Stage 20.00 ) ISO 30005, Ship recycling management systems - Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations ( Stage 20.00 )

Working Groups: WG 2 Security Management System (Convener : Ms. Nancy Williams, Co Convener: Mr. Peter Mackenbach) Work items assigned to WG 2: [ 00.01 ], [ 00.02 ], [ 00.03 ] WG 2 meetings: 1) 2005-03-22/23 2) 2005-04-27/29 3) 2005-07-14/15 4) 2006-01-30/02-01 5) 2006-04-04/07 Published standards: 5 New [ 00.01 ] New

[ 00.03 ] [ 00.02P ] [ 00.01P ] [ 00.03P ]

London, UK Delft, The Netherlands Gamboa, Panama Copenhagen, Denmark Rotterdam, The Netherlands

ISO 28000, Specification for security management systems for the supply chain ( IMO-link-NR 69 Stage 60.60 Published on 2007-09-21 ) ISO 28003, Security management systems for the supply chain-Requirements for the bodies providing audit and certification of supply chain security management systems ( IMO-link-NR 69 Stage 60.60 Published on 2007-08-02) PAS 28004:2006Security management systems for the supply chain-Guidelines for the implementation of ISO\PAS28000 ( IMO-link-NR 69 Stage 60.60 Published 2006-09-01 ) PAS 28000:2005Specification for security management systems for the supply chain ( IMO-link-NR 69 Stage 60.60 Published on 2005-11-15 ) PAS 28003:2006Security management systems for the supply chain-Requirements for bodies providing audit and certification of security management systems ( IMO-link-NR 69 Stage 60.60 Published 2006-10-01 )


Registered Work items: 1 Enquiry Stage: 1 New [ 00.02 ]

DIS 28004, Security management systems for the supply chain – Guidelines for the implementation of ISO/PAS 28000 ( IMO-link-NR 69 Stage 60.00: 2007-09-28)


ISO/TC 8 Advisory Group (AG) Chairman:

Capt. Charles H. Piersall (USA) (1995 - 2009)

Scope: The ISO/TC8 Advisory Group shall advise and assist the chairman and the secretariat with co-ordination, planning and steering of the work and other specific tasks.

Meetings 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) 30) 31) 32) 33) 34) 35) 36) 37) 38) 39) 40) 41) 42) 43) 44) 45)

1974-02-07/08 1974-05-21/22 1974-10-28/29 1975-05-05/06 1976-11-04/05 1977-09-19/20 1978-10-09/10 1979-10-24/25 1981-09-29/30 1982-11-09/10 1984-05-02/03 1984-12-11/12 1986-02-04/05 1987-05-12/14 1988-09-27/29 1989-09-25/27 1991-10-14/16 1992-10-19/22 1993-10-11/13 1995-04-19/20 1995-10-15 1996-03-13/14 1996-10-16 1997-04-03/04 1997-10-23 1998-06-11/12 1998-10-14 1999-05-04/05 1999-10-22 2000-05-03/04 2000-10-26 2001-06-05/07 2001-10-25 2002-06-05/06 2002-10-25 2003-06-17/19 2003-10-23 2004-06-1/3 2004-10- 22 2005-06- 7/8 2005-10- 28 2006-06-06/08 2006-10-20 2007-062007-11-03

Report Delft, Netherlands Delft, Netherlands Delft, Netherlands Oslo, Norway Wallsend, UK Madrid, Spain Genoa, Italy New Delphi, India Gdansk, Poland Hamburg, Germany Delft, Netherlands Delft, Netherlands Paris, France London, UK Hamburg, Germany Delft, Netherlands Delft, Netherlands Odense, Denmark Annapolis, USA Delft, Netherlands Beijing, China (with plenary) Genoa, Italy Cascais, Portugal (with plenary) Charlottenlund, Denmark Hamburg, Germany (with plenary) Lisbon, Portugal Maldon, United Kingdom (w. plenary) Galati, Romania Tokyo, Japan (with plenary) Azores, Portugal Gdansk, Poland St. Petersburg Roseau, Dominica Spain, Cadiz Busan, Rep. of Korea Malmö, Sweden Panama, Rep. of Panama Geneva, Switzerland Dalian, China Trieste, Italy New York, USA Trondheim, Norway Hamburg, Germany Sao Paulo, Brazil Santa Cruz de Tenerife, Spain

Working Groups: Ad-Hoc Group for Education (Leader: Prof. Jeong Je Kim)

AG N 5 AG N 12 AG N 19 AG N 26 AG N 29 AG N 49 AG N 70 AG N 98 AG N 156 AG N 186 AG N 199 = 8 N 674 AG N 230 AG N 248 AG N 262 AG N 286 AG N 317 AG N 361 AG N 398 AG N 436 AG N 457 AG N 463 AG N 482 = 8 N 876 AG N 486 = 8 N 902 AG N 495 = 8 N 903 AG N 502 AG N 513 = 8 N 919 AG N 517 AG N 525 AG N 532 AG N 542 AG N 548 AG N 558 AG N 567 AG N 573 AG N 580 AG N 593 AG N 599 AG N 605 AG N 616 AG N 624 AG N 633 AG N 640 AG N 643 AG N AG N


ISO/TC 8/SC 1 Lifesaving and fire protection Chairman: Secretariat:

Mr. Claudio Abbate (UNI / Italy) (2000 – 2008) Mr. George Grills (ANSI / U.S. Coast Guard)

Scope: Standardization of marine lifesaving and fire protection design, construction, equipment, materials and technology used in shipbuilding and the operation of ships in support of requirements developed by the International Maritime Organization (IMO) and the needs of the world maritime industry. SC1 Meetings: 1) 1995-06-20/21 2) 1996-03-04/05 3) 1997-04-28/29 4) 1998-03-30/31 5) 1999-03-15/16 6) 2000-05-15/16 7) 2001-04-18/20 8) 2002-04-18/19 9) 2003-04-14/16 10) 2004-04-27/28 11) 2005-06-13/15 12) 2006-04-10/12 13) 2007-05-14/16 14) 2008-Spring

Philadelphia, USA Baltimore, USA Baltimore, USA Baltimore, USA London, UK Washington, USA Copenhagen, Denmark Tokyo, Japan Baltimore, USA Viana do Castelo, Portugal Busan, Republic of Korea Vancouver, Canada Stockholm, Sweden Tokyo or Kyoto, Japan

Working Groups: WG 1 Life saving appliances and arrangements (Convener Mr. Jens Peter Bie, DS) Work items assigned to WG 1: [ 01.06DAM ], [ 01.14 ], [ 01.03R ], [ 01.57 ], [ 01.60 ] WG 2 Pilot and embarkation ladders (discontinued; consolidated with WG1) WG 3 Fire protection (Convener Mr. Tatsuhiro Hiraoka, Japan) Work Items assigned to WG 3: [ 01.32 ], [ 01.45 ], [ 01.55 ], [ 01.69 ] The former WG 1 meetings: 1) 1996-12-10/12 London, UK 2) 1997-04-27 Baltimore, USA 3) 1997-10-02/03 Copenhagen, Denmark 4) 1998-10-01/02 Hamburg, Germany 5) 2001-04-18 Charlottenlund, Denmark 6) 2001-11-28/29 New Orleans, USA 7) 2002-04-17 Tokyo, Japan 8) 2003-01-13/14 Copenhagen, Denmark 9) 2003-04-14/16 Baltimore, USA 10) 2003-10-13/14 Genoa, Italy 11) 2005-02-12/13 Miami, USA 12) 2005-06- 13/15 Busan, Republic of Korea 13) 2006-12-11/12 Arlington, USA 14) 2007-05-14 Stockholm, Sweden 15) 2008-03 Bonn, Germany WG 3 meetings: 1) 1996-06-04/05 2) 1996-11-25/27 3) 1997-04-27 4) 1997-10-02/03 5) 1998-03-29 6) 1998-06-15/16

Genoa, Italy Hamburg, Germany Baltimore, USA Copenhagen, Denmark Baltimore, USA Lübeck, Germany


7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21)

1998-08-20/21 1999-09-29/10-1 2001-04-18 2001-10-30/31 2002-04-17 2002-11-05/07 2003-04-14/16 2003-10-15/17 2004-04-27/28 2005-02-12/13 2005-06- 13/15 2006-07-12/13 2007-012007-05-14 2007-11-08/09

Genoa, Italy Copenhagen, Denmark Charlottenlund, Denmark Genoa, Italy Tokyo, Japan Stockholm, Sweden Baltimore, USA Trieste, Italy Viana do Castelo, Portugal Miami, USA Busan ,Republic of Korea Gerona, Italy Delft, Netherlands Stockholm, Sweden London, UK

Any other matters of importance to ISO/TC 8: Several standards at various stages of development were approved for re-instatement into the work programme. Please refer to the ISO/TC 8/SC 1 “Exception report” submitted to the 44th meeting of the ISO/TC 8 AG (Sao Paulo, 2007-06-04/07) by the Secretary, ISO/TC 8/SC 1. Liaisons (11): ISO/TC 21, ISO/TC 92/SC 1, TC 94, TC 145/SC 2, TC 188, IACS, IMO (FP), ITN, IMPA, EMSA, ICOMIA Published standards: 16 [ 01.01 ] [ 01.02 ] [ 01.04 ] [ 01.06 ] [ 01.07 ] [ 01.08 ] [ 01.11 ]

[ 01.12 ]

[ 01.13 ] [ 01.14 ] [ 01.16 ] [ 01.17 ] [ 01.41 ]

ISO 799:2004, Shipbuilding - Pilot ladders ( IMO-link-NR 43, Stage 90.60 ) ISO 5488:1979, Shipbuilding - Accommodation ladders ( IMO-link-NR 43, Stage 90.92 ) ISO/TR 6065:1991, Shipbuilding and marine structures - Inflatable liferafts - Materials ( IMO-link-NR 09, Stage 60.60 ) ISO 7061:1993, Shipbuilding - Aluminium shore gangways for seagoing vessels ( IMO-link-NR 77, Stage 90.92 ) ISO 7364:1983, Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches ( IMO-link-NR 74, Stage 90.93 ) ISO/TR 14564:1995, Shipbuilding and marine structures - Marking of escape routes ( IMO-link-NR 14, Stage 60.60 ) ISO 15370:2001, Ships and marine technology - Low-Location Lighting on passenger ships-Arrangement ( IMO-link-NR 17, Stage 20.99; under revision with CD in preparation; Target Dates: CD-2007-04-30, DIS-2008-04-30, FDIS-2009-10-31, IS-2010-04-30 ) ISO 15371:2000, Ships and marine technology - Fire extinguishing systems for protection of galley deep frying equipment - Fire tests ( IMO-link-NR 46; Stage 20.99; under revision with CD in preparation; Target Dates: CD-2007-04-30, DIS-2007-10-31, FDIS-2008-10-31, IS-2009-04-30; WG 3 ) ISO 15372:2000, Ships and marine technology - Inflatable rescue boats - coated fabrics for inflatable chambers ( IMO-link-NR 53, Stage 90.60 ) ISO 15736:2006, Ships and marine technology - Pyrotechnic life-savingappliances – Testing, inspection, and marking of production units ( IMO-link-NR 60, 78; Stage 60.60 ) ISO 15734:2001, Ships and marine technology - Hydrostatic release units ( IMO-link-NR 57, Stage 90.60 ) ISO 15738:2002, Ships and marine technology - Gas inflation systems for inflatable life-saving appliances ( IMO-link-NR 59, 67, 68, Stage 90.60 ) ISO 17339:2002, Ships and marine technology - Sea anchors for survival craft and rescue boats


[ 01.22 ] [ 01.35 ] [ 01.60 ]

( IMO-link-NR 65, Stage 60.60 ) ISO 17631:2002, Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape ( IMO-link-NR 14, 17, Stage 90.60 ) ISO 18813:2006, Ships and marine technology - Survival equipment for survival crafts and rescue boats ( IMO-link-NR 18, Stage 60.60 Published 2006-04-01 ) ISO 24408:2006, Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection, and marking of production units ( IMO-link-NR 66, Stage 60.60 Published 2006-04-01 )

Registered Work items: 20, including 3 revision Approval Stage: 2 [ 01.03R ] FDIS 5489, Shipbuilding - Embarkation ladders (Revision of ISO 5489:1986) ( IMO-link-NR 74, Stage 50.99; Reinstated: 2007-08-09; submitted to ISO/CS for registration as FDIS: 2007-08-13 ) [ 01.59 ] PRF 23269-1, Ships and marine technology - Breathing apparatus for ships - Part 1 Emergency escape breathing devices (EEBB) for ship-board use ( IMO-link-NR 76, Stage 50.99 Reinstated: 2007-08-09; submitted to ISO/CS for registration as FDIS: 2007-08-14, WG3 ) Enquiry Stage: 6 [ 01.32 ]

[ 01.45 ]

[ 01.55 ] [ 01.57 ] [ 01.61 ] [ 01.69 ]

Committee Stage: 4 [ 01.66 ]

[ 01.67 ]

[ 01.68 ]

DIS 17338, Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions ( IMO-link-NR 14, CD-2000-03-15 FDIS-2004-09-30 ( Stage 40.99; Reinstated 2007-08-09, FDIS in preparation; WG3 ) ISO/NP 24409-1, Ships and marine technology - Design, location, and use of shipboard signs for fire protection, life-saving appliances, and means of escape ( Stage 40.00 ; Reinstated: 2007-08-09; submitted to ISO/CS for registration as DIS: 2007-08-30; Targets: FDIS-2010-02-09, IS-2010-08-09; WG3 ) DIS 22488, Ships and marine technology - Shipboard fire fighters' outfits ( Protective clothing, gloves, boots, and helmets ) ( IMO-link-NR 76, Stage 40.99, Reinstated 2007-08-09, FDIS in preparation; WG3) DIS 24432, Ships and marine technology - Thermal protective aids with sleeves ( Stage 40.98; DIS ballot terminated 2005-04-25, FDIS in preparation; Original DIS target 2004-04-10 ) ISO/AWI 27991, Marine evacuation systems – Means of communication ( Stage 40.00 ; submitted to ISO/CS for registration as DIS: 2007-08-30; Targets: FDIS-2009-10-31, IS-2010-04-30; WG1 ) ISO/DIS 19292, Ships and marine technology - Point-type resettable flame detectors for ships ( Stage 40.98; deleted in favor of applying ISO 7240-10:2007 published by TC 21 for marine use, see Resolution 62 of TC8/SC1 N 212, Stockholm 2007-05-14/16 )

ISO/AWI 23269-2, Ships and marine technology – Breathing apparatus for ships – Part 2 – Breathing apparatus for shipboard firefighters ( IMO-link-NR 76, Stage 30.99; Reinstated: 2007-08-09; Target: CD-2008-07-31, DIS-2009-01-31, FDIS-2010-01-31, IS-2010-07-3; WG3 ) ISO/AWI 23269-3, Ships and marine technology - Breathing apparatus for ships - Part 3 Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes ( IMO-link-NR 76, Stage 30.99; Reinstated: 2007-08-09; Target: CD-2008-07-31, DIS-2009-01-31, FDIS-2010-01-31, IS-2010-07-31; WG3 ) ISO/NP 23269-4, Ships and marine technology- Breathing apparatus for ships – Part 4 : Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes ( IMO-link-NR 76, Stage 30.99; Reinstated: 2007-08-09; Target: CD-2008-08-09,


DIS-2009-02-09, FDIS-2010-02-09, IS-2010-08-09; WG3 ) [ 01.06 DAM ] CD DAM 7061:1993, Ships and marine technology – Pedestrian access equipment for ships (Revision of ISO 7061:1993) ( Stage 30.99 Original target: DIS - 2002-11-30, FDIS- 2003-08-31, IS-2005-04-10, WG1 ) Preparatory Stage: 8 [ 01.65 ] [ 01.71 ] [ 01.72 ] [ 01.74 ]

ISO/AWI 27995, Aerosol fire suppression systems for ships ( Stage 20.00; pending completion of work at IMO FP subcommittee ) ISO/AWI 24409-2, Ships and marine technology - Design, location, and use of shipboard signs for fire protection, life-saving appliances, and means of escape ( Stage 20.99; Registration Date 2007-05-16; WG3 ) ISO/AWI 24409-3, Ships and marine technology - Design, location, and use of Shipboard signs for fire protection, life-saving appliances, and means of escape ( Stage 20.99 ; Registration Date 2007-05-16; WG3 ) ISO/AWI 27993, Guidelines for development of instructions for action in survival craft ( Stage 20.00; pending possible input from ILAMA and IASST; Target Dates: CD2007-05-18, DIS- 2007-11-18; FDIS- 2008-11-18, IS- 2009-05-18 ) ISO/AWI 7240-26, Oil mist detectors ( transferred from ISO/TC 21; stage 20.99; CD in preparation; Target Dates: CD2007-04-30, DIS- 2008-04-30, FDIS- 2009-10-31, IS- 2010-04-30; WG3 ) ISO/AWI 17631 Amd 1, Shipboard plans for fire protection, life-saving appliances and means of escape (Revision of ISO 17631:2002) ( Stage 20.00; Start Date: 2007-06-20 ) ISO/AWI 27992, Marine evacuation systems – Installation testing ( Stage 20.20; Target Dates: CD- 2007-04-30, DIS- 2007-10-31, FDIS- 2008-10-31, IS- 2009-04-30; WG1; Registration Date: 2006-05-18 ) ISO/AWI 27994, Standard operating method for pyrotechnic distress signals ( Stage 20.00; pending a draft submission from ILAMA; Target Dates: CD2007-04-30, DIS- 2007-10-31, FDIS- 2008-10-31, IS- 2009-04-30; Registration Date: 2006-05-18 )

Possible new work items: 20 Proposal stage: 8 [ 01.18 ] PRF 15735, Ships and marine technology - Service of inflatable liferafts – Training of servicing technicians and format of servicing records ( IMO-link-NR 58, 67, 68; Stage 10.98; item currently dropped from work programme, pending submission to ISO/CS for reinstatement and publication via proof procedure; Original Targets: DIS-2000-12-20, IS-2004-08-30; WG1 ) [ 01.33 ] PRF 16848, Ships and marine technology - Pilot accommodation ladders ( IMO-link-NR 43; Stage 10.98; item currently dropped from work programme, pending submission to ISO/CS for reinstatement and publication via proof procedure, see Viana Resolution 45 and Pusan Resolution 52; Original target: FDIS-2001-03-30 IS-2004-09-30; WG1 ) [ 01.43 ] NP Prototype testing of pyrotechnic life-saving appliances ( Stage 10.00 WG1 ) [ 01.58 ] NP Desalinators for survival craft ( Stage 10.00 ) [ 01.62 ] NP Inspection procedure for life boat, launching mechanisms ( Stage 10.00 ) [ 01.63 ] NP Material standards for lifeboats and rigid rescue boats ( Stage 10.00 ) [ 01.64 ] NP Performance testing and approval standards for fire safety systems ( Stage 10.00 ) [ 01.73 ] NP Measurement, inspection, and servicing of low location lighting systems ( Stage 10.00 )

Preliminary items: 12


[ 01.19 ] [ 01.23 ] [ 01.24 ] [ 01.25 ] [ 01.26 ] [ 01.28 ] [ 01.30 ] [ 01.31 ] [ 01.34 ] [ 01.37 ] [ 01.38 ] [ 01.40 ]

PWI Inflatable life raft stability ( Stage 00.00 ) PWI Fire test procedure for approval of non-combustible composites ( Stage 00.00 ) PWI Fire test procedure for approval of composites use on HSCs ( Stage 00.00 ) PWI Fire door construction standard ( Stage 00.00 ) PWI Fire test procedures for approval of glass divisions and windows ( Stage 00.00 ) PWI Standard for placement of shipboard fire extinguishers ( Stage 00.00 ) PWI Test method for approving fire extinguishers ( Stage 00.00 ) PWI Standard for approving Halon alternative agents and fire extinguishing systems ( IMO-link-NR 21, Stage 00.00 ) PWI Width of escape stairways on passenger ships ( IMO-link-NR 16, Stage 00.00 ) PWI Alternative sprinkler systems ( IMO-link-NR 20, Stage 00.00 ) PWI Design and operation of passenger ships to the needs of elderly and disabled persons ( IMO-link-NR 38, Stage 00.00 ) PWI Risk analysis of escape routes ( IMO-link-NR 38, Stage 00.00 )


ISO/TC 8/SC 2 Marine environment protection Chairman: Secretariat:

Mr. Koichi Yoshida (Japan) (2006-2011) Mr. Bivan Patnaik (ANSI / U.S. Coast Guard)

Scope: Standardization of marine pollution abatement materials, equipment and technologies and associated marine environmental protection operational procedures to be used in the building and operation of vessels; comprising sea-going ships, vessels for inland navigation, offshore structures, ship-to-shore interfaces and all other marine structures subject to IMO requirements. SC 2 Meetings: 1) 1995-04-25/26 2) 1996-06-18/19 3) 1997-06-17/18 4) 1998-06-16/17 5) 1999-06-10 6) 2000-06-15 7) 2001-06-21 8) 2002-06-06 9) 2003-06-26 10) 2004-06-21/22 11) 2005-04--20 12) 2006-06-13/14 13) 2007-06-11/15 14) 2008-04-xx

New York City, USA Oslo, Norway Odense, Denmark Lisbon, Portugal Athens, Greece Bremen, Germany London, UK Oslo, Norway Hamburg, Germany Trondheim, Norway Tokyo, Japan Porvoo, Finland Cyprus London, UK

Working Groups: WG 1 Discharge control (no convener) WG 2 Operations- Disposal of Ship’s generated Garbage (Convenor: Dr. Behrens, Germany) 1) 2006-10-19/20 Hamburg, Germany WG 3 Environmental response (Convener Mr. Simon Rickaby, UK) Work items assigned to WG 3: [ 02.04 ], [ 02.38 ], [ 02.42 ], [ 02.46 ], [ 02.47 ], [ 02.48 ] WG2-meetings: 1) 2007-06-13

Limassol, Cyprus

WG3-meetings: 1) 1995-12-14 2) 1996-04-18 3) 1996-06-18 4) 1997-06-17 5) 1998-06-15/16 6) 1999-06-08/09 7) 2000-06-13/14 8) 2001-06-20 9) 2002-06-4/5 10) 2002-09-26/27 11) 2003-06-25 12) 2004-06-21/22 13) 2005-04-18/19 14) 2006-06-12 15) 2006-10-16/17 16) 2007-06-12

Washington D.C., USA Washington D.C., USA Oslo, Norway Odense, Denmark Lisbon, Portugal Athens, Greece Bremen, Germany London, UK Oslo, Norway London, UK Hamburg, Germany Trondheim, Norway Tokyo, Japan Porvoo, Finland Hamburg, Germany Limassol, Cyprus

ANY OTHER MATTERS OF IMPORTANCE TO ISO/TC 8: ISO 16446, Oil spill booms-Adaptor for joining dissimilar connectors under 5-year review. Voting ends on 2007, 09-17


Liaisons: Liaisons: ISO/TC 67, ISO/TC 70, ISO/TC 146, ISO/TC 147, ISO/TC 188, ISO/TC 207, IMO (Cat A), OCIMF (Cat A), ICS (Cat A), INTERTANKO (Cat A), WSC (Cat A) Published standards: 2 [ 02.30 ] [ 02.31 ]

Registered Work items: 8 Approval Stage: 3 [ 02.47 ]

[ 02.49 ]

[ 02.50 ]

Committee stage: 3 [ 02.38 ]

[ 02.42 ]

[ 02.46 ]

Preparatory Stage: 2 [ 02.04 ] [ 02.48 ]

ISO 16165:2001, Ships and marine technology - Marine environment protection Terminology relating to environmental response ( Stage 60.60 ) ISO 16446:2002, Ships and marine technology - Marine environment protection - Oil spill booms - Adapter for joining dissimilar (oil spill boom) connectors ( Stage 60.60 )

FDIS 21072-1, Ships and marine technology - Marine environmental protection Performance testing of oil Skimmers - Part 1: Moving water conditions ( Stage 40.00 Original target: CD2002-03-29, DIS-2003-03-29, IS2004-03-29, WG3 ) FDIS 21072-2, Ships and marine technology-Marine environmental protection-Performance resting of oil Skimmers - Part 2: Static water conditions ( Stage 40.00 Original target: CD-2005-04-05, DIS2006-04-05, IS-2007-04-05, WG3 ) FDIS 21072-3, Ships and marine technology-Marine environmental protection-Performance testing of oil skimmers-High viscosity oil ( Stage 30.20 )

CD 17896, Ships and marine technology - Marine environment protection - Mechanical equipment for oil spill response - Booms ( Stage 30.92 Original target: DIS - 2000-10-31, FDIS-2001-07-31, IS - 2001-12-24, WG3 ) CD 17897, Ships and marine technology - Marine environment protection - Mechanical equipment for oil spill response - Part 2: Skimmers ( Stage 30.92 Original target: DIS - 2000-10-31, FDIS-2001-07-31, IS - 2001-12-24, WG3 ) CD 21070, Ships and marine technology - Ships board handling of ship generated garbage ( Stage 30.00 Original target: WD-2001-09-29, CD - 2002-03-29, DIS - 2003-03-29, IS - 2004-03-29, WG3 )

AWI 21071, Ships and marine technology - Oil water separators ( IMO-link-NR 91 Stage 20.00 Original target : WD-2001-09-29, CD - 2002-03-29, DIS - 2003-03-29, IS - 2004-03-29, WG3 ) AWI 23268, Ships and marine technology - Oil barriers - Test and certification ( Stage 20.00 Original target: WD-2002-06-28, CD - 2002-12-28, DIS - 2003-12-28, IS - 2004-12-28,WG3 )

Possible new work items: 17 Proposal Stage: 3 [ 02.28 ] NP Anti fouling paints ( Stage 10.00 If requested by IMO ) [ 02.33 ] NP Water in oil emulsions for testing of oil spill response equipment ( Stage 10.00 ) [ 02.36 ] NP HNS prevention, response and cleanup ( Stage 10.00 )


Preliminary Stage: 14 [ 02.03 ] [ 02.05 ] [ 02.06 ] [ 02.07 ] [ 02.09 ] [ 02.11 ] [ 02.12 ] [ 02.18 ] [ 02.20 ] [ 02.32 ] [ 02.34 ] [ 02.39 ] [ 02.40 ] [ 02.41 ]

PWI Environmental protection relating to drinking water supply systems and drainage systems ( Stage 00.00 ) PWI Gray Water treatment ( Stage 00.00 ) PWI Black water treatment ( Stage 00.00 ) PWI Sandblasting alternatives ( Stage 00.00 ) PWI Compaction ( Stage 00.00 ) PWI Comminution, maceration ( Stage 00.00 ) PWI Sludge collection and disposal ( Stage 00.00 ) PWI Lightering ( Stage 00.00 ) PWI Other environmentally benign shipbuilding and repair ( Stage 00.00 ) PWI Oil spill shoreline damage assessment ( Stage 00.00 ) PWI Oil spill remote sensing and surveillance technology ( Stage 00.00 ) PWI Chemical dispersants for oil spill ( Stage 00.00 ) PWI In-situ burning of spill oil ( Stage 00.00 ) PWI Bio-remediation of oil spills ( Stage 00.00 )

Items proposed for cancellation or transfer to another subcommittee: 17 [ 02.23 ] PWI Environmental assessments prior to entering shipyards ( transferred to ISO/TC 8/WG 1, Linked to IMO by recycling of ships ) [ 02.01 ] Alternative tanker design guidelines ( IMO-link-NR 21 ,Stage 00.00 ) [ 02.02 ] Effluent standards ( IMO-link-NR 52, Stage 00.00 ) [ 02.08 ] Vapour recovery ( IMO-link-NR 22 Stage 00.00WG1, topic 5, Prevention of air pollution from ships, ) [ 02.10 ] On-Deck Spill Containment ( Stage 00.00 ) [ 02.13 ] Ship shore interface ( Stage 00.00 ) [ 02.17 ] Emergency towing assemblies ( Stage 00.00 ) [ 02.19 ] Shipboard damage assessment ( Stage 00.00 ) [ 02.21 ] Control and salvage operations ( Stage 00.00 ) [ 02.22 ] Tug escorts ( Stage 00.00 ) [ 02.25 ] Damage assessment ( Stage 00.00 ) [ 02.26 ] Stability and residual structural damage ( Stage 00.00 ) [ 02.29 ] Tankerman training ( Stage 00.00 ) [ 02.35 ] Oil spill prevention, response and cleanup training ( Stage 00.00 ) [ 02.37 ] Spill response planning and management


[ 02.44 ] [ 02.45 ]

( Stage 00.00 ) Determining oil content of water by the fluorescent method ( Stage 00.00 IMO/DE42 Report paragraph number 14.24 ) Determining oil content of water by the IR-spectrophotometric method ( Stage 00.00IMO/DE 42 Report paragraph number14.24 )


ISO/TC 8/SC 3 Piping and machinery Chairman: Secretariat:

Mr. Joseph Byrne (U.S. Maritime Administration) (2002-2008) Mr. Thane Gilman (U.S. Coast Guard) (2007)

Scope: Standardization of design, construction, equipment and technology for piping and machinery used in shipbuilding and the operation of ships, comprising sea-going ships, fishing vessels and trawlers, vessels for inland navigation, offshore structures, ship-to-shore interfaces, and all other marine structures subject to IMO requirements. SC 3 Meetings: 1) 1995-09-14/15 2) 1996-10-04/05 3) 1997-09-17/19 4) 1998-09-16/18 5) 1999-09-08/10 6) 2000-09-06/08 7) 2001-09-12/13 8) 2002-09-11/12 9) 2003-08-07 – 2003-09-08 10) 2004-09-15/17 11) 2005-05-17/19 12) 2006-10-16/17

Washington D.C., USA Hamburg, Germany Odense, Denmark Zoetermeer, Netherlands Copenhagen, Denmark London, UK Oslo, Norway Hamburg, Germany On-line via the Internet Washington, USA Copenhagen, Denmark Hamburg, Germany

Working Groups: 7 WG 1 Piping and ducting systems - Identification colours (Convener Ms. Maja Buntrock of Germany, DIN) Work items assigned to WG 1: merging of [ 03.23 ] and [ 03.24 ]. WG 5 Pressure/vacuum relief valves (Convener Mr. Eric Sorensen of Denmark) Work items assigned to WG 5: Revision of [ 03.25 ]. WG 6 Potable water systems and drainage systems (Convener Mrs. Buntrock of Germany, DIN) Work items assigned to WG 6: [ 03.30 ], [ 03.31 ], [ 03.32 ], [ 03.33 ], [ 03.34 ], WG 7 Heating, ventilation and air-conditioning (Convener Mr. Chris Spunar, Carrier Corp. of the USA) Work items assigned to WG 7: correction of [ 03.14 ], [ 03.15 ], revision of [ 03.21 ].


WG 9 Oil systems. Project Leader: Mr. Richard D. Delpizzo (ABS Americas of the USA, ANSI) Work items assigned to WG 9: [ 03.43 ], [ 03.44 ], [ 03.45 ], [ 03.46 ]. WG 10 Fire tests of piping components (Convener: Ms. Buntrock, DIN. Project Leader: Mr. Lippke of Germany, DIN) Work items assigned to WG 10: [ 03.26 ], [ 03.27 ]. WG 12 Ballast Water Management (Convener: Mr. Nickel, DIN) Work items assigned to WG 12: NWIP [ 03.47 ] Published standards: 41 [ 03.01 ] [ 03.02 ] [ 03.03 ] [ 03.04 ] [ 03.05 ] [ 03.06 ] [ 03.35 ] [ 03.07 ] [ 03.09 ] [ 03.10 ] [ 03.11 ] [ 03.12 ] [ 03.13 ] [ 03.14 ] [ 03.15 ] [ 03.16 ]

ISO 484-1:1981, Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of diameter greater than 2,50 m ( Stage 90.92 ) ISO 484-2:1981, Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive ( Stage 90.92 ) ISO/R 538:1967, Conventional signs to be used in schemes for the installations of pipeline systems in ships ( Stage 90.92 ) ISO/R 644:1967, Conventional signs to be used in schemes for the installation of ventilation systems in ships ( Stage 60.60 ) ISO/R 784:1968, Conventional signs to be used in schemes for the installation of sanitary systems in ships ( Stage 60.60 ) ISO 3715-1:2002, Ships and marine technology - Propulsion plants for ships Part 1 : Terms and definitions for geometry of propellers ( Stage 60.60 ) ISO 3715-2:2001, Ships and marine technology - Propulsion plants for ships - Part 2 : Vocabulary for controllable-pitch propeller plants ( Stage 60.60 ) ISO 5483:2003, Ships and marine technology - Drain plugs, welding rings, and gaskets for oil and water tank drains ( Stage 60.60 ) ISO 5620-1:1992, Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements ( Stage 90.93 ) ISO 5620-2:1992, Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components ( Stage 90.93 ) ISO 5621:1984, Shipbuilding - Bilge mud boxes for machinery spaces and tunnels General design characteristics ( Stage 90.60 ) ISO 5625:1978, Shipbuilding - Welded bulkhead pieces with flanges for steel pipe work PN 6, PN 10 and PN 16 ( Stage 90.60 ) ISO 6454:1984, Shipbuilding - Strum boxes ( Stage 90.93 ) ISO 7547:2002, Ships and marine technology - Air-conditioning and ventilation of accommodation spaces on board ships - Design conditions and basis calculations ( Stage 90.20 ) ISO 8861:1998, Shipbuilding - Engine room ventilation in diesel-engined ships - Design requirements and basis of calculations ( Stage 90.93 ) ISO 8862:1987, Air-conditioning and ventilation of machinery control-rooms on board ships - Design conditions and basis of calculations ( Stage 90.93 )


[ 03.17 ] [ 03.18 ] [ 03.19 ] [ 03.20 ]

[ 03.21 ] [ 03.22 ] [ 03.23 ] [ 03.24 ] [ 03.25 ] [ 03.26 ] [ 03.67 ] [ 03.27 ] [ 03.28 ] [ 03.29 ] [ 03.30 ] [ 03.31 ] [ 03.32 ] [ 03.33 ] [ 03.34 ] [ 03.41 ] [ 03.42 ]

ISO 8863:1987, Ship's wheelhouse windows - Heating by hot air of glass panes ( Stage 90.93 ) ISO 8864:1987, Air-conditioning and ventilation of wheelhouse on board ships - Design conditions and basis of calculations ( Stage 90.20 ) ISO 9099:1987, Air-conditioning and ventilation of dry provision rooms on board ships Design conditions and basis of calculations ( Stage 90.20 ) ISO 9785:2002, Ships and marine technology - Ventilation of cargo spaces where internal combustion engine vehicles may be driven - Calculation of theoretical total airflow required ( IMO-link-NR 25, Stage 90.20 ) ISO 9943:1991, Shipbuilding - Ventilation and air-treatment of galleys and pantries with cooking appliances ( Stage 30.20 ) ISO 13617:2001, Ships and marine technology - Shipboard incinerators – Requirements ( IMO-link-NR 13, Stage 90.60 ) ISO 14726-1:1999, Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media ( IMO-link-NR 02, Stage 60.60 ) ISO 14726-2:2002, Ships and marine technology - Identification colours for the content of piping systems - Part 2: Additional colours for media and/or functions ( IMO-link-NR 02, Stage 60.60 ) ISO 15364:2000, Ships and marine technology - Pressure/vacuum valves for cargo tanks ( IMO-link-NR 34, Stage 60.60 ) ISO 15540:1999, Ships and marine technology - Fire resistance of hose assemblies Test methods ( IMO-link-NR 47, Stage 60.60 ) ISO 15540 Cor1:1999, Ships and marine technology - Fire resistance of hose assemblies - Test methods TECHNICAL CORRIGENDUM 1 ( IMO-link-NR 47 Stage 60.60 ) ISO 15541:1999, Ships and marine technology - Fire resistance of hose assemblies - ´ Requirements on the test bench ( IMO-link-NR 47, Stage 60.60 ) ISO 15748-1:2002, Ships and marine technology - Potable water supply on ships and marine structures - Part 1: Planning and design ( Stage 90.20 ) ISO 15748-2:2002, Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation ( Stage 90.20 ) ISO 15749-1:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design ( IMO-link-NR 26, Stage 90.20 ) ISO 15749-2:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system ( IMO-link-NR 26, Stage 90.20 ) ISO 15749-3:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (IMO-link-NR 26, Stage 90.20 ) ISO 15749-4:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes ( IMO-link-NR 26, Stage 90.20 ) ISO 15749-5:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools ( IMO-link-NR 26, Stage 90.20 ) ISO 15837:2004, Ships and marine technology - Casketed mechanical couplings for use n piping systems - Performance specification ( Stage 60.60) ISO 15838:2003, Ships and marine technology - Fittings for use with casketed mechanical couplings used in piping applications-Performance specification ( Stage 60.60 )


[ 03.40 ] [ 03.47 ] [ 03.49 ] [ 03.50 ]

Registered Work items: 8 Approval stage: 2 [ 03.25R ]

New

[ 03.23R ]

Committee Stage: 6 [ 03.21R ]

[ 03.43 ] [ 03.44 ] [ 03.45 ] [ 03.46 ]

[ 03.67 ]

ISO 15840:2004, Ships and marine technology - Standard specification for Thermosetting resin fiberglass pipe and fittings to be used for marine applications ( IMO-link-NR 27, Stage 60.60 ) ISO 18770, Ships and marine technology - Machinery Space flammable oil systems Guidelines to prevent leakage of flammable oil ( IMO-link-NR 74, Stage 60.60 ) ISO 19921, Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals-Test methods ( Stage 60.60 ) ISO 19922, Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements imposed on the test bench ( Stage 60.60)

ISO/FDIS 15364, Ships and marine technology - Pressure/vacuum valves for cargo tanks ( IMO-link-NR 33, IS-2007-08-31, Stage 40.60 Revision of ISO 15364:200, DIS-2006-01-03 ) ISO/FDIS 14726, Ships and marine technology - Identification colours for the content of piping systems – Part 1: Main colours and media ( IMO-link-NR 02, IS-2008-06-08, Stage 40.20, Revision of ISO 14726-1:1999 and ISO 14726-2:1999, Merge with part 1 and part 2)

Revision of ISO 9943:1991, Ships and marine technology - Ventilation and airtreatment of galleys and pantries with cooking appliances ( DIS-2007-06-30, FDIS-2008-12-31, IS-2009-06-30, Stage 30.00. Revision of ISO 9943:1991 ) ISO/CD 28520, Ships and marine technology-Lubricating oil systems- Guidance for grades of cleanliness and flushing. ( DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 ) ISO/CD 28521, Ships and marine technology – Hydraulic oil systems – Guidance for grades of cleanliness and flushing ( IMO-link-NR 33, DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 ) ISO/CD 28522, Ships and marine technology – Hydraulic oil systems – Guidance for assembling and flushing ( DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 ) ISO/CD 28523, Ships and marine technology – Sampling from lubricating oil and hydraulic oil systems – Guidance for sampling of representative samples for determination of degree of cleanliness and for solid particle contamination ( DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 ) ISO/CD 29501, Ships and marine technology – Preservation of the environment – Cold ironing ( IMO-link-NR 86, CD-2007-04-30, DIS-2007-11-30, FDIS-2008-05-30, IS-2008-11-30, Stage 20.20 )

Preparatory stage: 1 NWIP: Ships and marine technology – Ballast water management systems – Discharge sampling procedures ( Stage 10.20 New project ballot initiated 6/7/2007) Possible new work items: 22 including 9 revisions Proposal Stage: 9 [ 03.14R ] NP 7547:2002, Ships and marine technology - Air-conditioning and ventilation of accommodation spaces on board ships - Design conditions and basis calculations ( Stage 10.00 Revision of ISO 7547:2000 )


[ 03.26R ] [ 03.27R ] [ 03.30R ] [ 03.31R ] [ 03.32R ] [ 03.33R ] [ 03.34R ] [ 03.15R ]

Preliminary Stage: 13 [ 03.39 ] [ 03.48 ] [ 03.52 ] [ 03.54 ] [ 03.55 ] [ 03.56 ] [ 03.57 ] [ 03.58 ] [ 03.59 ] [ 03.62 ] [ 03.63 ] [ 03.64 ] [ 03.65 ]

Deleted items: 7 [ 03.36 ] [ 03.38 ]

NP 15540:1999, Ships and marine technology - Fire resistance of hose assemblies - Test methods ( Stage 10.00 Revision of ISO 15540:1999 ) NP 15541:1999, Ships and marine technology - Fire resistance of hose assemblies - ´ Requirements on the test bench ( Stage 10.00 Revision of ISO 15541:1999 ) NP 15749-1:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design ( Stage 10.00 Revision of ISO 15749:2004 ) NP 15749-2:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system ( Stage 10.00 Revision of ISO 15749-2:2004 ) NP 15749-3:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems ( Stage 10.00 Revision of ISO 15749-3:2004 ) NP 15749-4:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes ( Stage 10.00 Revision of ISO 15749-4:2004 ) NP 15749-5:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools ( Stage 10.00 Revision of ISO 15749-5:2004 ) NP 8861:1998, Shipbuilding - Engine room ventilation in diesel-engined ships - Design requirements and basis of calculations ( Stage 10.00 Revision of ISO 8861:1998 )

Ships and marine technology - Centrifugal pumps for shipboard use (Stage 00.00, WG3) Ships and marine technology - Spray shields for mechanical joints in flammable liquid piping ( Stage 00.00 ) Devices for monitoring and recording NOx levels in engine exhaust ( Stage 00.00 IMO/DE42 Report paragraph number 10.3, 10.9-10.13 ) Procedures for determining the equivalency of methods to reduce Vessel NOx emissions ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3) Reducing NOx emissions by the xxx method ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3 ) Standard for vessel exhaust gas cleaning systems ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3) Reducing SOx emissions by the xxx method ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3 ) Specification for bilge alarms ( Stage 00.00 IMO/DE 42 Report paragraph number 14.24 ) Specification for bilge monitors ( Stage 00.00 IMO/DE 42 Report paragraph number 14.24 ) Performance standard and test procedures for equipment to monitor discharges from cargo spaces in tankers ( Stage 00.00 IMO/DE 43 Report paragraph number 11.6-11.20 ) Engine room arrangements, including human factors (transfer from SC9) ( Stage 00.00 Transferred from 09.22 ) PWI Ships and marine technology- SOX Eliminatio/Minimization ( Stage 00.00 Transferred from SC 2) PWI Ships and marine technology- NOX Eliminatio/Minimization ( Stage 00.00 Transferred from SC 2)

PWI Code on alarms and indicators PWI Ships and marine technology - Auxiliary single stage steam turbines for shipboard use


[ 03.37 ] [ 03.51 ] [ 03.53 ] [ 03.60 ] [ 03.61 ]

WD 16288, Ships and marine technology - Mechanical seals for shipboard pump applications Procedures for obtaining representative samples of on-board fuel oil Specification for continuous emissions monitoring equipment(CEN) Performance standards for shipboard pollution prevention equipment (e.g. oily water separators) Standard test fluid for shipboard pollution prevention equipment


ISO/TC 8/SC 4 Outfitting and deck machinery Chairman: Secretariat:

Mr. Tong Xiaochuan (China) (2001-2009) Mr. Liu Zhen (SAC / China)

Scope: Standardization of design, construction and operation of equipment and technology for ship outfitting and deck machinery; including ship-to-shore interface, cargo systems and lifting gear etc. used in shipbuilding and the operation of ships in support of the requirements developed by the international Maritime Organization (IMO) and the needs of the world maritime industry SC 4 Meetings: 1) 1996-08-13/14 2) 2000-10-23 3) 2002-10-21 4) 2004-10-18 5) 2006-10-16 6) 2007-10-31 – 11-01

Shanghai, China Gdansk, Poland Busan, Korea Rep. of Dalian, China Hamburg, Germany Puerto de la Cruz, Spanien

Working Groups: WG 1 Launching appliances for lifeboats (Convener Mr. Zhou Shengxian, China) Work items assigned to WG 1: [ 04.26 ] WG 2 Deck machinery (Convener Mr. Huang Xiechu, China) Work items assigned to WG 2: [ 04.04R ], [ 04.05R ] WG 3 Outfitting (Convener: Yang anli, China) Work items assigned to WG 3: [ 04.01R ]

Published standards: 25 [ 04.01 ] [ 04.02 ] [ 04.03 ] [ 04.04 ] [ 04.05 ] [ 04.06 ] [ 04.07 ] [ 04.08 ] [ 04.09 ] [ 04.10 ] [ 04.11 ] [ 04.12 ] [ 04.13 ] [ 04.14 ] [ 04.15 ]

ISO 1704, (1991, confirmed 1996, revision, WG3 ): Shipbuilding-Stub-link anchor chains ISO 3078, ( 1987,=EN ISO 3078, WI 00300006 rejected in CEN/TC 300, confirmed 1996/1997/2002 ): Shipbuilding-Cargo winches ISO 3730, ( 1988, confirmed 1998/2003 ): Shipbuilding-Mooring winches ISO 3828, ( 1984, confirmed 1996, revision, WG2 ): Shipbuilding and marine structures-Deck machinery-Vocabulary ISO 4568, ( 2006, revision, WG2 ): Shipbuilding-Sea-going, vessels-Windlasses and anchor capstans ISO 6043, ( 1985, confirmed 1995/1996/2000/2005 ): Shipbuilding and marine structures-Eye and fork assemblies under tension load-Main dimensions ISO 6044, ( 1985, confirmed 1995/1996/2000/2005 ): Shipbuilding and marine structures-Derrick boom heel fittings-Main dimensions ISO 6045, ( 1987, confirmed 1992/1996/1998/2003 ): Shipbuilding and marine structures-Bearings for derrick goosenecks-Assemblies and Components ISO 6115, ( 1988, =EN ISO 6115: 1996, CEN/TC 300, 00300007, confirmed 1998/2003 ): Shipbuilding-Trawl winches ISO 6325, ( 1987, confirmed 1995/1997/2002 ): Shipbuilding-cable stoppers ISO 6482, ( 1980, confirmed 1995/1996/2000/2005, revision, WG2 ): Shipbuilding-Deck machinery-Warping end profiles ISO 6555, ( 1988,=EN ISO 6555, WI 00300008 rejected in CEN/TC 300, confirmed 1996/1998/2003 ): Shipbuilding-Topping winches ISO 6812, ( 1983, confirmed 1993/1996/1998/2003 ): Roll on/roll off ship-to-shore connection-Interface between terminals and ships with straight stern/bow ramps ISO 7365, ( 1983, confirmed 1998/2003 ): Shipbuilding and marine structures-Deck machinery-Towing winches for deep sea use ISO 7824, ( 1986, confirmed 1991/1996/2001/2006, revision, WG2 ): Shipbuilding and marine structures-Lubrication nipples-Cone and flat types


[ 04.16 ] [ 04.17 ] [ 04.18 ] [ 04.19 ] [ 04.20 ] [ 04.21 ] [ 04.22 ] [ 04.23 ] [ 04.24 ] [ 04.26 ]

ISO 7825, ( 1985, confirmed 1995/1996/2000/2005, revision, WG2 ): Shipbuilding-Deck machinery-General requirements ISO 8146, ( 1985, confirmed 1995/1998/2000/2005 ): Shipbuilding and marine structures-Oval eye-plates ISO 8147, ( 1995, confirmed 2000/2005 ): Shipbuilding and marine structures-Derrick rigs and component parts-Vocabulary ISO 8148, ( 1985, conformed 1995/1998/2000/2005 ): Shipbuilding and marine structures-Derrick boom head-fittings-Fixed type ISO 8314, ( 1987, confirmed 1992/1996/1997/2002 ): Shipbuilding and marine structures-Trunnion pieces for span bearings and lead block bearings ISO 8431, ( 1988, confirmed 1998/2003 ): Shipbuilding Fixed jib cranes-Ship-mounted type for general cargo handling ISO 9089, ( 1989, confirmed 1992/1996/2004, revision, WG2 ): Marine structures-Mobile offshore units-Anchor winches ISO 9367-1, ( 1989 ): Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships-general requirements-Part1:Commercial vehicles and combination of vehicles, semi-trailers excluded ( with ISO/TC22/WG7 ) ISO 9367-2, ( 1994 ): Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships-general requirements-Part2:Semi-trailers ( with ISO/TC22/WG7 ) ISO 15516:2006, Ships and marine technology - Launching appliances for davit-launched lifeboats

Work items under construction: 3 Publication Stage: 1 [ 04.04R ] ISO 3828, Shipbuilding and marine structures – Deck machinery - Vocabulary (Revision of ISO 3828:1984) ( Stage 60.00, Original target WD-2002-09-30, CD-2003-09-30, DIS-2004-06-30, FDIS-2005-03-31, IS-2006-10-31, WG2 ) Approval stage: 2 [ 04.01R ] [ 04.30 ]

FDIS 1704, Shipbuilding - Stud-link anchor chains ( Revision of ISO 1704:1991 ) ( Stage 50.20, Original target: WD-2002-09-30,CD-2003-09-30, DIS - 2004-06-30, FDIS - 2005-03-31, IS - 2006-10-31, WG3 ) FDIS 22673, Ships and marine technology-Launching appliances for free-fall lifeboats ( Stage 50.00, Original target CD-2005-08-31, DIS - 2006-02-28, FDIS - 2007-02-28, S- 2007-8-30, WG1 )

Possible new work items: 12 including 7 revisions Standards to be developed as soon as possible: 0 Proposal stage: 4 [ 04.11R ] [ 04.23R ]

[ 04.24R ] [ 04.29 ]

Revision ISO 6482:1980, Shipbuilding-Deck machinery-Warping end profiles ( WG 2 ) Revision ISO 9367-1, ( 1989 ): Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships-general requirements- Part1: Commercial vehicles and combination of vehicles, semi-trailers Excluded ( WG3, with ISO/TC22/WG7 ) Revision ISO 9367-2, ( 1994 ): Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships-general requirements-Part2: Semi-trailers ( WG3, with ISO/TC22/WG7 ) NP Rapid deployable emergency towing apparatus for tankers ( IMO/DE 42 Report paragraph number 5.1-5.6, WG 3 )


Dormant inactive item: 3 [ 04.15R ] [ 04.16R ] [ 04.22R ]

Revision ISO 7824:1986, Shipbuilding and marine structures-Lubrication nipples-Cone and flat end type ( WG 2 ) Revision ISO 7825:1985, Shipbuilding-Deck machinery-General requirements ( WG 2 ) Revision ISO 9089:1989, Marine structures-Mobile offshore units-Anchor winches ( WG 2 )

Items proposed for cancellation or transfer to another Subcommittee: 5 [ 04.17R ] Revision ISO 8146:1985, Shipbuilding and marine structures-Oval eye plates ( WG 3 ) [ 04.19R ] Revision ISO 8148:1985, Shipbuilding and marine structures-Derrick boom head-fittings-Fixed type ( WG 3 ) [ 04.25 ] NP 13819, Petroleum and natural gas industries-Offshore structures - Part 4: Floatingstructures ( IMO-link-NR 29, with ISO/TC67/SC7/WG5 ) [ 04.27 ] Guidelines for safe ocean towing ( IMO-link-NR 39, WG 3 ) [ 04.28 ] Suitable design arrangements for container securing operations aboard ships ( IMO-link-NR 73, WG 3 )


ISO/TC 8/SC 6 Navigation Chairman: Secretariat:

Prof. Shogo Hayashi (Japan) (2004-2010) Mr. Kosei Hasegawa (JISC / JSTRA)

Scope: Standardization in the field of navigation, including instruments and systems etc., for navigation SC 6 Meetings: 1) 1999-10-18 2) 2002-10-21 3) 2007-10-30

Tokyo, Japan Busan, Korea Rep. Of. Tenerife, Spain

Working Groups: WG 3 Magnetic compasses and binnacles (Convener: Prof. H. Suzuki, Japan) Work item assigned to WG 3: [ 06.32 ] WG 11 Daylight signalling lamps (Convenor Mrs. Maja Buntrock, Germany) Work item assigned to WG 11: [ 06.33 ] Working project: Revision work of ISO 8729:1997, Ships and marine technology – Marine radar reflectors - Part 1: Passive type (ISO 8729-1) [ 06.07R ] (Project leader: Prof. Shogo Hayashi, Japan) - Part 2: Active type (ISO 8729-2) [ 06.07R ] (Project leader: Mr. Peter Munro, UK) ISO 10596, Marine Wind Vanes and Anemometers [ 06.34 ] (Project leader: Dr. T. Hanafusa) Ad-hoc group: Gyro-compass and THD interface to Radar [ 06.06 ] [ 06.16 ] [ 06.22 ] [ 06.22C ] [ 06.28 ] [ 06.28C ] [ 06.29 ] [ 06.29C ] (The participating countries: China, Germany, US, Japan) Any other matters of importance to ISO/TC 8: Navigation Light standard, ISO 16180 There was a vote on item 3rdDIS from November 9, 2006 to January 9, 2007. As a result, ISO 16180 will advance to FDIS stage. On the other hand, the regulation of the navigation light was created by IMO/NAV53. The value of this regulation is based on EN 14744 “Inland navigation vessels and sea-going vessels – Navigation light”. 53rd IMO/NAV The chairman of SC 6, as the ISO representative, attended the 53rd IMO/NAV held from 23rd to 27thJuly 2007. Liaisons: IEC/TC80, CIRM, IALA, IMO(NAV), ITU, ITN, WSC Published standards: 33 including 5 technical corrigendum [ 06.01 ]

ISO 449:1997, Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A ( Stage 90.92 )


[ 06.02 ] [ 06.03 ] [ 06.04 ] [ 06.05 ] New

[ 06.36 ]

[ 06.06 ] [ 06.07 ] [ 06.08 ] [06.08C] [ 06.09 ] [ 06.10 ] [ 06.11 ] [06.11C] [ 06.12 ] [ 06.19 ]

[ 06.16 ] [ 06.15 ] [ 06.21 ] [ 06.40 ] [ 06.20 ] New

[ 06.30 ]

New

[ 06.26 ] [ 06.22 ] [06.22C]

ISO 613:2000, Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B ( Stage 90.93 ) ISO 694:2000, Ships and marine technology - Positioning of magnetic compasses in ships ( Stage 90.93 ) ISO 1069:1973, Magnetic compasses and binnacles for sea navigation - Vocabulary ( Stage 90.93 ) ISO 2269:1992, Shipbuilding - Class A magnetic compasses, azimuth reading devices and binnacles - Tests and certification ( Stage 90.92 ) ISO 8468:2007, Ships and marine technology - Ship’s bridge layout and associated equipment - Requirements and guidelines ( Transferred from SC5 (05.01) on 2006-10-17, IMO-link-NR 15, 84, Stage 60.60, Published on 2007-07-15 ) ISO 8728:1997, Ships and marine technology - Marine gyro-compasses ( IMO-link-NR 10, Stage 90.20 ) ISO 8729:1997, Ships and marine technology - Marine radar reflectors ( IMO-link-NR 11, Stage 90.92 ) ISO 9875:2000, Ships and marine technology - Marine echo-sounding equipment ( IMO-link-NR 06, Stage 90.93 ) ISO 9875:2000/Cor1:2006, Ships and marine technology - Marine echo-sounding equipment - Technical corrigendum1 ( IMO-link-NR 06, Stage 60.60 ) ISO 9876:1997, Ships and marine technology - Marine facsimile receivers for meteorological charts ( Stage 90.20 ) ISO 10316:1990, Shipbuilding - Class B magnetic compasses - Tests and certification ( Stage 90.93 ) ISO 11606:2000, Ships and marine technology - Marine electromagnetic compasses ( IMO-link-NR 05 Stage 90.93 ) ISO 11606:2000/Cor1:2005, Ships and marine technology - Marine electromagnetic compasses - Technical corrigendum1 ( IMO-link-NR 05 Stage 60.60 ) ISO 11674:2006, Ships and marine technology - Heading control systems ( IMO-link-NR 01, Stage 60.60 ) ISO 16273:2003, Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results ( IMO-link-NR 39, Stage 60.60 ) ISO 16328:2001, Ships and marine technology - Gyro-compasses for high-speed craft ( IMO-link-NR 10, 39, 48, Stage 90.60, Joint work with IEC/TC80 ) ISO 16329:2003, Ships and marine technology - Heading control systems for high-speed craft ( IMO-link-NR 39, 47 Stage 60.60, Joint work with IEC/TC80 ) ISO 17884:2004, Ships and marine technology - Navigation - Searchlights for high speed craft ( IMO-Link-NR 39 Stage 60.60 ) ISO 17899:2004, Ships and marine technology - Marine electric window wipers ( Transferred from SC5 (05.05) on 2006-10-17, Stage 90.20 ) ISO 19379:2003, Ships and marine technology - ECS databases - Content, quality, updating and testing ( Stage 60.60 ) ISO 20672:2007, Ships and marine technology - Rate of turn indicators ( IMO-link-NR 67, Stage 60.60, Published on 2007-05-15 ) ISO 20673:2007, Ships and marine technology - Electric rudder angle indicators ( IMO-link-NR 67, Stage 60.60, Published on 2007-05-15 ) ISO 22090-1:2002, Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses ( IMO-Link-NR 66 Stage 90.20 ) ISO 22090-1:2002/Cor1:2005, Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses - Technical corrigendum1


[ 06.28 ] [06.28C] [ 06.29 ] [06.29C] [ 06.35 ] New

[ 06.27 ]

New

[ 06.31 ] [ 06.18 ]

( IMO-link-NR 66 Stage 60.60 ) ISO 22090-2:2004, Ships and marine technology - Transmitting Heading Devices (THDs) - Part 2 : Geomagnetic principles ( IMO-link-NR 66, Stage 90.60 ) ISO 22090-2:2004/Cor1:2005, Ships and marine technology - Transmitting Heading Devices(THDs) - Part2: Geomagnetic principles - Technical corrigendum1 ( IMO-link-NR 66, Stage 90.60 ) ISO 22090-3:2004, Ships and marine technology - Transmitting Heading Devices (THDs) - Part 3: GNSS principles ( IMO-link-NR 66, Stage 60.60 ) ISO 22090-3:2004/Cor1:2005, Ships and marine technology-Transmitting Heading Devices(THDs) - Part 3: GNSS principles - Technical corrigendum1 ( IMO-link-NR 66, Stage 60.60) ISO 22472:2006, Ships and marine technology - Guideline for the operation and installation of voyage data recorder (VDR) ( IMO-link-NR 70, Stage 60.60 ) ISO 22554:2007, Ships and marine technology - Propeller shaft revolution indicators Electric type and electronic type ( IMO-link-NR 67, Stage 60.60, Published on 2007-09-15 ) ISO 22555:2007, Ships and marine technology - Propeller pitch indicators ( IMO-link-NR 67, Stage 60.60, Published on 2007-09-15 ) IEC 62065:2002, Maritimes navigation and radio communication equipment and systems - Track control systems - Operational and performance requirements methods of testing and required test results ( IMO-link-NR 59, Stage 60.60, work undertaken by IEC/TC80/WG1 )

Registered Work items: 5 including 2 revisions Approval Stage: 1 [ 06.33 ] PRF 25861, Ships and marine technology - Navigation - Daylight signaling lamps ( IMO-Link-NR 89, Stage 50.00, IS-2008-02-28 ) Enquiry Stage: 0 Committee Stage: 1 [ 06.32 ]

Preparatory Stage: 3 [ 06.07R ]

[ 06.07R ]

[ 06.34 ]

CD 25862, Ships and marine technology - Marine magnetic compasses, azimuth reading devices and binnacles for steering ( Stage 30.20, Under CD vote from 2007-09-14 to 2007-12-14, Original Target Day: CD-2006-03-31 DIS-2007-03-31 FDIS-2007-12-31 IS-2008-03-31, Extension Target Day (Under vote by ISO/TMB): CD-2007-03-31 DIS-2008-03-31 FDIS-2008-12-31 IS-2009-03-31 )

WD 8729-1, Ships and marine technology - Marine radar reflectors - Part 1: Passive type ( Revision of ISO 8729:1997 ) ( IMO-link-NR 11, Stage 20.20, Original Target Day: CD-2007-01-31, DIS-2008-01-31, FDIS-2008-10-31, IS-2009-01-31 ) WD 8729-2, Ships and marine technology - Marine radar reflectors - Part 2: Active type (Revision of ISO 8729:1997) ( IMO-link-NR 11, Stage 20.20, Original Target Day: CD-2007-01-31, DIS-2008-01-31, FDIS-2008-10-31, IS-2009-01-31 ) WD 10596, Ships and marine technology - Marine wind vane and anemometers ( IMO-Link-NR 90, Stage 20.00, Original Target Day: CD-2007-07-31, DIS-2008-07-31, FDIS-2009-04-31, IS-2009-07-31 )

Possible new work items: 3 Proposal Stage: 1 [ 06.41 ] PWI Ships and marine technology - Sound reception systems ( Transferred from SC 5 on 2006-10-17, IMO-link-NR 85, Stage 20.00 )


Preliminary Stage: 2 [ 06.38 ] [ 06.39 ]

Deleted item: 1 [ 06.37 ]

PWI Electronically generated field of vision ( Transferred from SC 5 (05.03) on 2006-10-17, IMO-link-NR 60, Stage 00.00 ) PWI Bridge watch alarm, central alarms and alarm management ( Transferred from SC5 (05.04) on 2006-10-17, IMO-link-NR 61, Stage 00.00 )

ISO 14612:2004 Ships and marine technology - Ship's bridge layout and associated equipment - Requirements and guidelines for centralized and integrated bridge functions ( Transferred from SC5 (05.04) on 2006-10-17, IMO-link-NR 15, 84, ISO 14612:2004 was unified to ISO 8468:2007 )


ISO/TC 8/SC 7 Inland navigation vessels Chairman: Secretariat:

Mr. Yuri N. Rumiantsev (Russian Federation) (1997 - 2008) Mr. Vladimir Y. Beylinson (Research Institute for Standardization and Certification "Lot" )

Scope: Standardization of general issues, principal requirements, design elements, equipment and technology in the field of inland navigation vessels, including shipborne barges and dredging equipment SC 7 Meetings: No future meetings planned Working Groups: none Any other matters of importance to ISO/TC 8 : Concerning the collaboration with CEN/TC 15. According to agreement between CEN/TC 15 and ISO/TC 8 adoption of EN 14744 has been proposed as NWI. Liaisons: ISO/TC 188, IEC/TC 18, CEN/TC 15, CCR, CD, CIPA, IADC, UN/ECE, IACS Published standards: 44 [ 07.01 ] [ 07.03 ] [ 07.04 ] [ 07.05 ] [ 07.06 ] [ 07.07 ] [ 07.07A ] [ 07.08 ] [ 07.09 ] [ 07.10 ] [ 07.11 ] [ 07.12 ] [ 07.13 ] [ 07.14 ] [ 07.15 ] [ 07.16 ] [ 07.17 ]

ISO 21:1985, Shipbuilding - Inland navigation - Cable-lifters for stud-link anchor chains ( Stage 60.60, reconfirmed in 2005 ) ISO 3652:1975, Shipbuilding - Inland vessels - Rope reels ( Stage 60.60, reconfirmed in 2005 ) ISO 3674:1976, Shipbuilding - Inland vessels - Deck rail ( Stage 90.93 reconfirmed in 2007 ) ISO 3786:1975, Shipbuilding - Inland navigation vessels towing hooks - Scale of tractive efforts ( Stage 60.60, reconfirmed in 2005 ) ISO 3876:1986, Shipbuilding - Inland vessels - Hand-holes ( Stage 90.93, reconfirmed 2007 ) ISO 3913:1977, Shipbuilding - Welded steel bollards ( Stage 90.93, reconfirmed 2007 ) ISO 3913Add1:1980 Addendum 1, Double bollards for inland navigation ( Stage 60.60, reconfirmed in 2005 ) ISO 3926:1980, Shipbuilding - Inland navigation - Couplings for oil and fuel reception Mating dimensions ( Stage 60.60, reconfirmed in 2005 ) ISO 3935:1977, Shipbuilding - Inland navigation - Fire-fighting water system - Pressures ( Stage 90.93, reconfirmed in 2007 ) ISO 3948:1977, Shipbuilding - Inland vessels - Compressed-air systems - Pressure ranges ( Stage 90.20, in review ) ISO 3969:1979, Shipbuilding - Inland vessels - Operational documentation ( Stage 90.93, reconfirmed 2007 ) ISO 4001:1977, Shipbuilding - Inland vessels - Raft-type life-saving apparatus ( Stage 90.93, reconfirmed 2007 ) ISO 4050:1977, Shipbuilding - Inland vessels - "Rhine" and Hall's stockless anchors ( Stage 90.93, reconfirmed 2007 ) ISO 4051:1977, Shipbuilding - Inland vessels - Steering gear - Values of torques ( Stage 60.60 reconfirmed in 2005 ) ISO 4085:1979, Shipbuilding - Inland navigation - Swing derricks ( Stage 60.60 reconfirmed in 2005 ) ISO 4089:1979, Shipbuilding - Inland navigation - Sealing rubber for covers of cargo hatches ( Stage 60.60, reconfirmed in 2005 ) ISO 4127-1:1979, Shipbuilding - Inland navigation - Fairleads - Part 1: Two-lip fairleads


[ 07.18 ] [ 07.19 ] [ 07.20 ] [ 07.21 ] [ 07.22 ] [ 07.23 ] [ 07.24 ] [ 07.25 ] [ 07.26 ] [ 07.27 ] [ 07.28 ] [ 07.29 ] [ 07.30 ] [ 07.31 ] [ 07.32 ] [ 07.33 ] [ 07.34 ] [ 07.35 ] [ 07.36 ] [ 07.37 ] [ 07.38 ] [ 07.39 ] [ 07.40 ] [ 07.41 ]

( Stage 60.60, reconfirmed in 2005 ) ISO 4127-2:1980, Shipbuilding - Inland navigation - Fairleads - Part 2: Roller fairleads ( Stage 60.60, reconfirmed in 2005 ) ISO 4143:1981, Shipbuilding - Inland navigation - Open rowing lifeboats ( Stage 90.93, reconfirmed in 2007 ) ISO 4175:1979, Shipbuilding - Shipborne barges, series 1: Main dimensions ( Stage 60.60, reconfirmed in 2005 ) ISO 5485:1986, Shipbuilding - Inland vessels - Fixed steel deck stairs ( Stage 90.93, reconfirmed in 2007 ) ISO/TR 5987:1984, Inland navigation - Water fire-fighting system - Couplings of fire hoses - General technical requirements ( Stage 60.60 ) ISO 6205:1988, Inland navigation vessels - Customs sealing systems - Basic technical requirements ( Stage 60.60, reconfirmed in 2003 ) ISO 6216:1980, Shipbuilding - Inland navigation - Pilot craft - Classification and basic requirements ( Stage 60.60, reconfirmed in 2005 ) ISO 6217:1982, Shipbuilding - Inland navigation - Pilot craft - Identification painting and inscriptions ( Stage 90.93, reconfirmed 2007 ) ISO 6218:2005, Ships and marine technology - Inland navigation vessels - Manually operated coupling devices for push tows-safety requirement and main dimensions ( Stage 60.60, published 2005-04 ) ISO 6219:1983, Shipbuilding - Inland vessels - Windlasses and anchor capstans ( Stage 60.60, reconfirmed in 2003 ) ISO 6764:1985, Shipbuilding – Ship- borne barges, series 1 - Lifting post casting Arrangement, dimensions and method of testing ( Stage 60.60, reconfirmed in 2005 ) ISO 6765:1985, Shipbuilding – Ship- borne barges, series 3 - Main dimensions ( Stage 60.60, reconfirmed in 2005 ) ISO 6766:1984, Shipbuilding – Ship- borne barges, series 4 - Main dimensions ( Stage 60.60, reconfirmed in 2005 ) ISO 7221:1984, Shipbuilding and marine structures - Shipborne barges, series 1, on barge carriers - Principal technical requirements ( Stage 60.60, reconfirmed in 2005 ) ISO 7222:1985, Shipbuilding - Shipborne barges, series 2 - Main dimensions ( Stage 60.60, reconfirmed in 2005 ) ISO 7236:1991, Inland navigation vessels - Demountable signal masts for push-tows Mounting attachment ( Stage 90.93, reconfirmed in 2007 ) ISO 7255:1985, Shipbuilding - Active control units of ships - Vocabulary ( Stage 60.60, reconfirmed in 2005 ) ISO 7545:1983, Shipbuilding and marine structures - Inland navigation - Single-lock automatic couplings for push tows ( Stage 60.60, reconfirmed in 2003 ) ISO 7606:1988, Shipbuilding - Inland navigation vessels - Draught scales ( Stage 60.60, reconfirmed in 2003 ) ISO 7607:1984, Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket capacities ( Stage 60.60, reconfirmed in 2005 ) ISO 7608:1985, Shipbuilding - Inland navigation - Couplings for disposal of oily mixture and sewage water ( Stage 60.60, reconfirmed in 2005 ) ISO 8303:1985, Shipbuilding - Shipborne barges, series 3 - Main operational and technical requirements ( Stage 60.60, reconfirmed in 2005 ) ISO 8304:1984, Shipbuilding - Shipborne barges, series 3 - Ventilation system - Principal mating dimensions ( Stage 60.60, reconfirmed in 2005 ) ISO 8384:2000, Ships and marine technology - Dredgers - Vocabulary ( Stage 60.60, reconfirmed in 2005 )


[ 07.42 ] [ 07.43 ] [ 07.44 ]

ISO 8385:1999, Ships and marine technology - Dredgers - Classification ( Stage 60.60, reconfirmed in 2005 ) ISO 9382:1990, Shipborne barges, all series - Classification and main requirements ( Stage 60.60, reconfirmed in 2005 ) ISO 9437:1986, Shipbuilding - Inland vessels - Matrosov anchors ( Stage 90.93 reconfirmed in 2007 )

Work items under consideration: 1 Proposal Stage: 1 [ 07.45 ] PWI Inland navigation vessels – Navigation lights ( Stage 00.00, Adoption of EN 14744 ) Withdrawn standards: 2 [ 07.02 ] [ 07.26 ]

ISO 3372:1975, Shipbuilding – Inland vessels – Mushroom-type ventilator heads ( withdrawn in 2001, stage 95.99 ) ISO 6218, Shipbuilding - Inland navigation – Coupling winches for push tows – main dimensions ( withdrawn in 2005, replaced by [ 07.26 ] Shipbuilding - Inland navigation vessels – Manually operated coupling devices for push tows – Safety requirements and main dimensions )


ISO/TC 8/SC 8 Structures Chairman: Secretary:

Prof. Jeong Je Kim( Rep. of Korea) (2006 –2011) Mr. Byeong Cheol Choi (KATS, Rep. of Korea)

Scope: Standardization of design, construction and structural elements for ships and maritime installations for definition of interfaces and creation of interchangeability as well as for determination of safety requirements SC 8 Meetings: 1) 2002-10-21

Busan, Korea Rep. Of

Working Group: WG3 Strength Assessment (Convener : Prof. Jeom Kee Paik, Korea) Work items assigned to WG 3 : [ 08.27 ], [ 08.28 ] Participation: Belgium, China, Finland, France, India, Japan, Netherlands, Portugal, Republic of Korea, Singapore, Ukraine, UK, USA (Observer : IACS, Greece) Any other matters of importance to ISO/TC8: Systematic review: 4 ISO 3797:1976 Shipbuilding - Vertical steel ladders Start Date: 2007-07-15, End Date: 2007-12-17 ISO 5779:1987 Shipbuilding - Ordinary rectangular windows – Positioning Start Date: 2007-07-15, End Date: 2007-12-17 ISO 5797:2004 Ships and marine technology - Windows and side scuttles for fire-resistant constructions Start Date: 2007-07-15, End Date: 2007-12-17 ISO 21005:2004 Ships and marine technology - Thermally toughened safety-glass panes for windows and side scuttles Start Date: 2007-07-15, End Date: 2007-12-17 Liaisons: IMO, IACS, ITN, ISO/TC35, ISO/TC67/SC7, ISO/TC108, ISO/TC156 Published standards: 21 [ 08.01 ] [ 08.03 ] [ 08.05 ] [ 08.05A ] [ 08.06 ] [ 08.07 ] [ 08.08 ] [ 08.09 ] [ 08.10 ] [ 08.11 ]

ISO 614:1989, Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing ( Stage 90.93, 3rd edition, confirmed 2004 ) ISO 1751:1993, Shipbuilding and marine structures - Ships' side scuttles (Stage 90.93, 2nd edition, confirmed 2003) ISO 3434:1992, Shipbuilding and marine structures - Heated glass panes for ships' rectangular windows ( Stage 90.93, 2nd edition ) ISO 3434:1992/Amd 1:2004, Shipbuilding and marine structures - Heated glass panes for ships' rectangular windows – Amendment 1 ( Stage 60.60, Published on 2004-06-28 ) ISO 3796:1999, Ships and marine technology - Clear openings for external single-leaf doors ( Stage 90.93, 2nd edition, confirmed 2004, CEN/TC300 EN ISO 3796: 2001 ) ISO 3797:1976, Shipbuilding - Vertical steel ladders ( Stage 90.93, confirmed 2002, taken over from SC 4 ) ISO 3902:1990, Shipbuilding and marine structures - Gaskets for rectangular windows and side scuttles ( Stage 90.93, 2nd edition, confirmed 2005 ) ISO 3903:1993, Shipbuilding and marine structures - Ships' ordinary rectangular windows ( Stage 90.93, 2nd edition, confirmed 2003 ) ISO 3904:1990, Shipbuilding and marine structures - Clear-view screens ( Stage 90.93, 2nd edition, confirmed 2005 ) ISO 5480:1979, Shipbuilding - Guard rails for cargo ships


[ 08.12 ] [ 08.13 ] [ 08.14 ] [ 08.16 ] [ 08.17 ] [ 08.18 ] [ 08.19 ] [ 08.20 ] [ 08.21 ] [ 08.22 ] [ 08.25 ]

Registered Work items: 2 Enquiry Stage: 1 [ 08.27 ]

Committee Stage: 1 [ 08.28 ]

( Stage 90.93, confirmed 2005 ) ISO 5778:1998, Ships and marine technology - Small weathertight steel hatches ( Stage 90.93, IMO-link-NR 40, 2nd edition, confirmed 2003, CEN/TC300: EN ISO 5778:2000 ) ISO 5779:1987, Shipbuilding - Ordinary rectangular windows - Positioning ( Stage 90.93, confirmed 2002 ) ISO 5780:1987, Shipbuilding - Side scuttles - Positioning ( Stage 90.93, confirmed 2002 ) ISO 5894:1999, Ships and marine technology - Manholes with bolted covers ( Stage 90.93, 2nd edition, confirmed 2004 ) ISO 6042:1998, Ships and marine technology - Weathertight single-leaf steel doors ( Stage 90.93, IMO-link-NR 53, 2nd edition, confirmed 2003, CEN/TC300: EN ISO 6042:2000 ) ISO 6345:1990, Shipbuilding and marine structures - Windows and side scuttles – Vocabulary ( Stage 90.93, confirmed 2005 ) ISO 9519:1990, Shipbuilding and marine structures - Rungs for dog-step ladders ( Stage 90.93, EN 29519:1994, CEN/TC15, confirmed 2002, taken over from SC4 ) ISO 15401:2000, Ships and marine technology - Bulk carriers – Construction quality of hull structure ( Stage 90.93, IMO-link-NR 03, confirmed 2005 ) ISO 15402:2000, Ships and marine technology - Bulk carriers - Repair quality of hull structure ( Stage 90.93, IMO-link-NR 03, confirmed 2005 ) ISO 5797:2004, Ships and marine technology - Windows and side scuttles for fire-resistant constructions ( Stage 60.60, IMO-link-NR 08, Published on 2004-07-30 ) ISO 21005:2004, Ships and marine technology – Thermally toughened safety glass panes for windows and side scuttles ( Stage 60.60, Published on 2004-09-24 )

FDIS 18072-1, Ships and marine technology - Ship Structures – Part 1: General requirements for their limit state assessment ( WG3, Stage 50.20, FDIS Ballot, Start Date: 2007-08-15, End Date: 2007-10-15 FDIS was submitted to ISO/CS on 2006-11-29 transferred from [02.27] )

CD 18072-2, Ships and marine technology - Ship Structures – Part 2 : Requirements for their ultimate limit state assessment ( WG3, stage 30.98, CD voting was closed 2005-08-31, CD was approved, transferred from [ 02.27 ] )

Before the ISO/TC8/AG meeting in October 2006 target date: DIS : 2006-11-30, FDIS : 2007-02-28, IS : 2007-08-31, at the ISO/TC8/AG meeting in October 2006 approved target date: DIS : 2007-11-30, FDIS : 2008-02-28, IS : 2008-08-31 at the ISO/TC8/AG meeting in June 2007 approved target date: DIS : 2007-11-30, FDIS : 2008-11-30, IS : 2009-05-31, Even though Target Date of DIS was approved to 2007-11-30 at AG meeting in October 2006, ISO/CS cancelled this item on 2007-02-05. After AG meeting in June 2007, TC8 Secretary requested ISO/CS to revive this item with Approved Target Dates, but there is no reply until now from ISO/CS. The target dates need to be updated at ISO/CS.


Justification: WG3 Convener requested the revised target date for Part 2. There are more than 70 numerical formulas, and it is difficult to verify them numerically and experimentally, so he says he needs more time to develop this work item. The revised target date which was approved at AG meeting should be updated at ISO/CS database.

Possible new work items: 5 Proposal Stage: 0 Preliminary Stage: 5 [ 08.23 ] [ 08.24 ] [ 08.26 ] [ 08.29 ] [ 08.30 ]

Hull stress monitoring systems (HSMS/ Voyage data recorder) ( IMO-link-NR 32, Stage 00.00, transferred from [ 10.18 ] ) Corrosion protection systems for seawater ballast tanks ( IMO-link-NR 34, Stage 00.00 ) Composite materials ( Stage 00.00 transferred from [ 01.20 ] ) Ship structures - Part 3: Requirements for their fatigue limit state assessment ( Stage 00.00 ) Ship structures – Part 4: Requirements for their accidental limit state assessment ( Stage 00.00 )

Deleted Items: 3 [ 08.02 ] [ 08.04 ] [ 08.15 ]

ISO 1095:1989, Shipbuilding and marine structures - Toughened safety glass panes for side scuttles ( Stage 95.99, ISO 1095 was merged into ISO 21005 ) ISO 3254:1989, Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows ( Stage 95.99, ISO 3254 was merged into ISO 21005 ) ISO 5797-1:1989, Shipbuilding and marine structures - Windows and side scuttles for fire resistant constructions - Specifications - Part 1: "B" class divisions ( Stage 95.99, ISO 5797-1:1989 was merged into ISO 5797:2004 )


ISO/TC 8/SC 9 General requirements Chairman: Secretariat:

Mr. Tsuyoshi Yahagi (Japan) (2005 - 2010) Mr. Yoshihito Tominaga (JISC/JSTRA)

Scope: Investigate, develop and maintain standard specifications, test methods, definitions and practices for the design, construction and repair of marine vessels, shipboard quality assurance, human factors, management systems, regulatory requirements, technical data management. SC 9 Meetings: 1) 1999-10-19 2) 2004-10-18 3) 2006-10-16

Tokyo, Japan Dalian, China Hamburg, Germany

Working groups: No setting Liaisons: CEN/TC300, IACS, ITN, WSC Published standards: 9 [ 09.01 ] [ 09.02 ] [ 09.08 ] [ 09.09 ] [ 09.10 ] [ 09.11 ] [ 09.23 ] [ 09.24 ] [ 09.25 ]

ISO 1964:1987, Shipbuilding - Indication of details on the general arrangement plans of ships ( Stage 90.20 ) ISO 2412:1982, Shipbuilding - Colours of indicator lights ( IMO-link-NR 07, 23, 58, Stage 60.60 ) ISO 6050:1987, Shipbuilding - Bulbous bow and side thruster symbols ( Stage 90.20 ) ISO/TR 13298:1998, Ships and marine technology - Vocabulary of general terms ( Stage 60.60 ) ISO 15016:2002, Ships and marine technology - General requirement - Guidelines for the assessment of speed and power performance by means of sea trial data ( Stage 90.20 ) ISO 15583:2005, Ships and marine technology - Maritime standards list ( Stage 60.60 ) ISO 17357:2002, Ships and marine technology - High - pressure floating pneumatic rubber fenders ( Stage 60.60 ) ISO 19018:2004, Ships and marine technology - Terms, abbreviations and graphical symbols and concepts on navigation ( Stage 90.60 ) ISO 19019:2005, Ships and marine technology - Guide for planning, carrying out and reporting sea trials ( Stage 60.60 )

Possible new work items: 10 Proposal Stage: 2 New [ 09.13 ] NP Ships and marine technology- Standards for manoeuvrability ( IMO-link-NR 50, Stage 10.00 ) New [ 09.29 ] NP Ships and marine technology- Coating standard ( IMO-Link-NR 34, 87, Link with [ 08.24 ], Stage 10.00 ) Preliminary Stage: 4 [ 09.15 ] [ 09.16 ]

PWI Ships and marine technology- Wing In Ground (WIG) Craft ( IMO-Link-NR 31, Stage 00.00 ) PWI Ships and marine technology- Combined pusher tug-barge safety standards ( IMO-link-NR 35, Stage 00.00 )


[ 09.17 ] [ 09.21 ]

PWI Ships and marine technology- Guidelines for the design, construction and operation of passenger submersible craft ( IMO-link-NR 36, Stage 00.00 ) PWI Ships and marine technology- Compendium of definitions on watertight, weathertight, splash-tight, dust-tight, gastight, vacuum-tight etc. ( Stage 00.00 )

Items transferred to another Subcommittee: 4 [ 09.18 ] PWI Ships and marine technology- Standards related to High Speed Craft (HSC) ( under discussion within SC 6 ) [ 09.19 ] PWI Ships and marine technology- Standards on Ro/Ro ferry safety ( transferred to SC 1, IMO-Link-NR 41, Stage 00.00 ) [ 09.22 ] PWI Ships and marine technology- Engine room arrangements, including human factors ( transferred to SC3 ) [ 09.27 ] PWI Ships and marine technology- Guidelines for maintenance and monitoring of on-board materials containing asbestos ( transferred to TC 8/WG 1, IMO/DE 42, Report paragraph number 6.12 )


ISO/TC 8/SC 10 Computer applications Chairman: Secretariat:

Mr. Ørnulf Jan Rødseth (Norway) (2002 –2008 ) Mr. Jan Frank Ulvås (SN)

Scope: Standardization in the field of computer applications in shipbuilding and the operation of ships. SC 10 Meetings: 1) 1997-10-20 2) 1998-10-11 3) 1999-10-17 4) 2000-01-20 5) 2001-11-30

Hamburg, Germany Maldon, U.K. Tokyo, Japan Corresponding meeting Corresponding meeting

Working Groups: 4 WG 3 General Principle for the development and use of programmable electronic systems in marine applications (convener Mr. Jonathan Earthy, UK) Work items assigned to WG 3: [ 10.14 ] WG 4 Shipboard Loading Instruments (convener Mr. H.J. Koelman, The Netherlands) Work items assigned to WG4: [ 10.15 ] WG 5 Data transfer standard for maritime, intermodal transportation and security (convener Mr. Eugene D. Story, USA) Work items assigned to WG5: [ 10.17 ] WG 6 Electronic Port Clearance (convener Mr. Ørnulf Jan Rodseth, Norway) Work items assigned to WG6: [ 10. 22 ] Published standards: 17 including 2 PAS [ 10.01 ] ISO 5572:1987, Shipbuilding and marine structures - Numbering of equipment and structural elements in ships ( Stage 90.93 ) [ 10.02 ] ISO 6582:1983, Shipbuilding - Numerical control of machines - ESSI format ( Stage 90.93 ) [ 10.03 ] ISO 7460:1983, Shipbuilding - Shiplines - Identification of geometric data ( Stage 90.93 ) [ 10.04 ] ISO 7461:1984, Shipbuilding - Shiplines - Numerical representation of elements of the hull geometry ( Stage 90.93 ) [ 10.05 ] ISO 7462:1985, Shipbuilding - Principal ship dimensions - Terminology and definitions for computer applications ( Stage 90.93 ) [ 10.07 ] ISO 7838:1984, Shipbuilding - Shiplines - Formats and data organization ( Stage 90.93 ) [ 10.08 ] ISO 8193:1984, Shipbuilding - Shell plating information ( Stage 90.93 ) [ 10.09 ] ISO 8277:1988, Shipbuilding - Pipework - Information transfer ( Stage 90.93 ) [ 10.10 ] ISO 9203-1:1989, Shipbuilding - Topology of ship hull structure elements - Part 1: Location of elements ( Stage 60.60 ) [ 10.11 ] ISO 9203-2:1989, Shipbuilding - Topology of ship hull structure elements - Part 2: Description of elements ( Stage 90.20 ) [ 10.12 ] ISO 9203-3:1989, Shipbuilding - Topology of ship hull structure elements - Part 3:


[ 10.16 ] [ 10.21 ] New

[ 10.15 ] [ 10.17 ] [ 10.14 ]

[ 10.21P ]

Relations of elements ( Stage 90.20 ) ISO 15849:2001, Ships and marine technology - Guidelines for implementation of a fleet management system network ( IMO-link-NR 51, Stage 60.60 ) ISO 15849 Amd1:2003, Ships and marine technology - Guidelines for implementation of a fleet management system network AMENDMENT 1 ( IMO-link-NR 51, Stage 60.60, Published in 2003-08-26 ) ISO 16155:2006, Ships and marine technology - Shipboard loading instrument ( Stage 60.60, Published on 2006-04 ) ISO PAS 16917:2002, Ships and marine technology - Data transfer standard for maritime and intermodal transportation ( IMO-link-NR 51, Stage 60.60, ISO PAS published 2002-12 ) ISO 17894:2005, Ships and marine technology - Computer applications - General principles for the development and use of programmable electronic systems in marine applications ( DIS-2004-02-16, Stage 60.60 ) ISO/PAS 22853:2005, Ships and marine technology - computer applications, specifications MSML (Marine Safety Mark-up Language) ( Stage 60.60, Published on 2005-10 )

Registered Work items: 1 Approved Stage: 0 Preparatory stage: 1 New [ 10.22 ]

AWI 28005, Ships and marine technology - Electronic port clearance (EPC) ( IMO-Link-NR 88, Stage 20.00 )

Possible new work items: 2 Proposal Stage: 2 [ 10.19 ] NP Ships and marine technology - Ship safety record ( Stage 10.00 ) [ 10.20 ] NP Ships and marine technology - Safety in shipping and environmentally friendly shipping ( Stage 10.00 ) Items for proposed to cancellation: 2 [ 10.19 ] NP Ships and marine technology - Ship safety record ( Stage 10.00, merged with PAS22853 ) [ 10.20 ] NP Ships and marine technology - Safety in shipping and environmentally friendly shipping ( Stage 10.00 )


ISO/TC 8/SC 11 Intermodal and short sea shipping Chairman: Secretariat:

Prof. Jae Wook Lee (Korea Rep. of) (2006-2011) Ms Luz Smith Rodriguez (AENOR)

Scope: Standardization of general issues; principal requirements; design, construction and operation of ships and equipment; technology for intermodal, including ship/port interface and other modes of transportation, and short sea shipping. SC 11 Meetings: 1) 2007-10-30

Santa Cruz de Tenerife, Spain

Working Groups: WG 1 Marine Port Facility Security Assessments and Security Plan Development (Convenor Mr. Steven O’Malley, USA) Work item assigned to WG 1: [ 11.03 ] WG 2 Best Practices for Supply Chain Security (Convenor Mr. Steven O’Malley, USA) Work item assigned to WG 1: [ 11.04 ] WG 2 meetings: 1) 2005-04-06/08 2) 2005-07-11/13 3) 2005-09-12/14 4) 2006-01-24/27

Madrid, Spain Gamboa, Panama Kobe, Japan Brussels, Belgium

Liaisons1: ISO/TC 22, ISO/TC 104, ISO/TC 145, ISO/TC 204, IAPH, WCO, WSC Published standards: 2 including 2 PAS [ 11.03P ] ISO PAS 20858:2004, Ships and marine technology - Marine port facility security assessments and security plan development ( IMO-link-NR 69, Stage 60.60 ) [ 11.04P ] ISO PAS 28001:2006, Security management systems for the supply chain - Best practices for implementing supply chain security-Assessments and plans ( IMO-Link-NR 69, Stage 60.60, Published on 2006-09-01 ) Registered Work items: 2 Inquiry Stage: 1 [ 11.03 ] New

[ 11.04 ]

ISO/DIS 20858, Ships and marine technology - Maritime port facility security assessments and security plan development ( IMO-Link-NR 69, Stage 20.99 ) ISO/DIS 28001, Security management systems for the supply chain - Best Practices for implementing supply chain security - Assessments and plans requirements and guidance ( IMO-link-NR 69, Stage 40.99 )

These two DIS have been approved without negative votes nor comments. They have been sent to ISO CS for theirdirect publication as IS (FDIS stage not necessary). ISO/TC 8/SC 11 is waiting for their publication. Preparatory Stage: 0 Possible new work items: 02

1 2

To be reviewed at the ISO/TC 8/SC 11 meeting. Will be studied at the ISO/TC 8/SC 11 meeting.


ISO/TC 8/SC 12 Large Yachts Chairman: Secretary:

Mr. Luigi Scarpati (Italy) (2006 – 2011) Mr. Emilio Tremolada (UNI, Italy)

Scope: Standardization of equipment and construction details of Large Yachts: a pleasure vessel having a length of the hull 24 m and above. SC 12 Meetings: 1) 2007-03-26/27

Milan, Italy

Working Groups: WG 1 Design criteria (Convenor NN) Work item assigned to WG 1: none WG 2 Safety and security (Convenor Mr David Ralph, U.K) Work items assigned to WG 2: [ 12.01 ], [ 12.03 ] WG 3 Deck equipment (Convenor Mr Edvino Algardi, Italy) Work item assigned to WG 3: [ 12.04 ] WG 4 Systems (Convenor NN) Work item assigned to WG 4: none WG 5 Quality (Convenor Mr Tom Marhevko, U.S.A.) Work item assigned to WG 5: [ 12.02 ] Liaisons: ICOMIA Registered Work Items: 4 Preparatory stage: 4 New [ 12.01 ]

New

[ 12.02 ]

New

[ 12.03 ]

New

[ 12.04 ]

ISO AWI 11336, Ships and marine technology - Large yachts-Windows and port-lights Strength and water tightness ( Stage 20.00, this item transferred from SC1, [ 01.78 ] – Limit dates: CD: 2008-08-28, DIS: 2009-02-28, FDIS: 2010-02-28, IS: 2010-08-28 ) ISO AWI 11347, Ships and marine technology-Large yachts-Measurement and analysis of the visual appearance of coatings ( Stage 20.00, this item transferred from SC1, [ 01.79 ] – Limit dates: CD: 2008-08-28, DIS: 2009-02-28, FDIS: 2010-02-28, IS: 2010-08-28 ) ISO AWI 11208, Ships and marine technology - Large yachts-Windows and port-lights Strength and water tightness ( Stage 20.00 Limit dates: CD: 2008-08-09, DIS: 2009-02-09, FDIS: 2010-02-09, IS: 2010-08-09) ISO AWI 11209, Ships and marine technology - Large yachts-Windows and port-lights Strength and water tightness ( Stage 20.00 Limit dates: CD: 2008-08-09, DIS: 2009-02-09, FDIS: 2010-02-09, IS: 2010-08-09 )


Annex A List of IMO-link-NR’s The first column gives the IMO-link-NR as used in this document. The second column contains the Title of the subject, the relevant IMO bodies and IMO Resolutions or other reference documents. IMO MSC FP DE NAV SLF COMS MEPC BLG SOLAS 74 LSA Code FTP Code FSS Code ICG Code BCH Code

International Maritime Organization Maritime Safety Committee Fire Protection Design and equipment Safety of Navigation Stability and Loadlines and Fishing vessels Safety Radiocommunication and Search and Rescue Marine Environment Protection Committee Bulk Liquids and Gases International Convention for the Safety of Life at Sea 1974, as amended Life-saving Appliances Code Fire Test Procedures Code Fire Safety Systems Code International Gas Carrier Code International Bulk Chemical Code

The last column refers to the internal ISO/TC 8 work item number. Further information on these work items can be found under the relevant subcommittee, indicated by the first two digits of the work item number e.g. [ 06.12 ] indicating Sub committee 6, item 12. 1

2

3

4

Heading control systems MSC/NAV A.210 (VII) A.342 (IX) A.694 (17) SOLAS 1974, II-1, Reg. 29 SOLAS 1974, II-1, Reg. 30 SOLAS 1981, V, Reg. 19 Engine-room layout, design and arrangements MSC/DE (correspondence). Group, G.P. Miante, US Coast Guard) a. Colour coding of pipes; b. Circuit tagging; c. Alarms and indicators (see IMO-link-NR 7, 23); d. Illumination levels e. Transport systems within the engine-room; f. Escape routes. Bulk carrier safety MSC/DE A.744 (18) A.789 (19) SOLAS II-I, Part B-2 Global maritime distress and safety systems (GMDSS) COMSAR A.694 (17)

[ 06.12 ]

ISO 11674:2006, Ships and marine technology - Heading control systems

[ 03.23 ]

ISO 14726-1:1999, Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media ISO 14726-2:2002, Ships and marine technology - Identification colours for the content of piping systems - Part 2: Additional colours for media and/or functions ISO/FDIS 14726, Ships and marine technology - Identification colours for the content of piping systems – Part 1: Main colours and media

[ 03.24 ] [ 03.23R ]

[ 08.20 ] [ 08.21 ]

ISO 15401:2000, Ships and marine technology - Bulk carriers – Construction quality of hull structure ISO 15402:2000, Ships and marine technology - Bulk carriers Repair quality of hull structure


5

Marine electromagnetic compasses NAV, A.694 (17)

[ 06.11 ]

Marine echo sounding equipment MSC/NAV, SOLAS 1981 V, Reg. 12 A.224 (VII) (in revision)

[ 06.08 ]

7

Colours of indicator lights

[ 09.02 ]

8

Fire resistant constructions FP SOLAS 1974, Ch. II-2 FTP Code Testing of lifesaving appliances DE SOLAS 1974, Ch. Res. MSC.81 (70) LSA Code Marine gyro-compasses NAV SOLAS 1974, V A.424 (XI), A.694 (17) Marine radar reflectors NAV A.384 (X), A.477 (XII) (in revision)

[ 08.22 ]

6

9

10

11

[06.11C]

[06.08C]

[ 01.04 ]

ISO/TR 6065:1991, Shipbuilding and marine structures - Inflatable liferafts - Materials

[ 06.16 ]

ISO

[ 06.07 ]

ISO 8729:1997, Ships and marine technology - Marine radar reflectors WD 8729-1, Ships and marine technology - Marine radar reflectors - Part 1: Passive type ( Revision of ISO 8729:1997 ) WD 8729-2, Ships and marine technology - Marine radar reflectors - Part 2: Active type ( Revision of ISO 8729:1997)

[ 06.07R ] [ 06.07R ]

12 13

14

"deleted" Shipboard incinerators MEPC/DE MEPC.59 (33) (in revision) MEPC 38 DE 39, DE 40 LSA symbols DE A.760 (18) Res. MSC, 82 (70) MSC/Circ. 1050

"deleted" [ 03.22 ]

[ 01.08 ] [ 01.22 ] [ 01.32 ]

15

Ergonomic design criteria for bridge equipment and lay-out NAV/correspondence group MSC/CIRC.566 SOLAS 5.

ISO 11606:2000, Ships and marine technology - Marine electromagnetic compasses ISO 11606:2000/Cor1:2005, Ships and marine technology Marine electromagnetic compasses - Technical corrigendum1 ISO 9875:2000, Ships and marine technology - Marine echo-sounding equipment ISO 9875:2000/Cor1:2006, Ships and marine technology - Marine echo-sounding equipment Technical corrigendum1 ISO 2412:1982, Shipbuilding - Colours of indicator lights (see also IMO-Link-NR 23, 58) ISO 5797:2004, Ships and marine technology - Windows and side scuttles for fire-resistant constructions

[ 06.36 ] [ 06.37 ]

16328:2001, Ships and marine technology Gyro-compasses for high-speed craft (see IMO-link-NR 39, 48)

ISO 13617:2001, Ships and marine technology - Shipboard incinerators – Requirements

ISO/TR 14564:1995, Shipbuilding and marine structures - Marking of escape routes ISO 17631:2002, Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape (see IMO-link-NR 17) DIS 17338, Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions

ISO 8468:2007, Ships and marine technology - Ship’s bridge layout and associated equipment - Requirements and guidelines (see IMO-link-NR 84) ISO 14612:2004 Ships and marine technology - Ship's bridge layout and associated equipment - Requirements and guidelines for centralized and integrated bridge functions


16

17

18

19

20

21

22

23 24

25

Widths of escape stairways on passenger ships FP SOLAS 74, Ch. -2 FSS Code Res. 757 (18) Low location lighting on passenger ships FP SOLAS 1974, Ch. -2 FSS Code Res. A.752 (18) MSC.Cir699 Equipment for life-saving appliances SOLAS 1974, Ch. LSA Code Sprinkler systems FP, SOLAS 1974, Ch. -2 FSS Code Res. A 800 (19) Alternative arrangements for Halon fire-extinguishing systems in machinery spaces FP,SOLAS 1974, Ch. -2 FSS Code MSC/Circ. 668 MSC/Circ. 728 Alternative tanker design guidelines MEPC/BLG, MEPC.66 (37) MARPOL 73/78, Annex 1, Reg. 13F (5) Prevention of air pollution from ships MEPC/correspondence group, Comm. K. Eldridge, US Coast Guard new annex to MARPOL 73/78 Code on alarms and indicators MSC/DE A.686 (17), A.830 (19) Ventilation systems in ro-ro cargo spaces MSC Ship sewage systems MSC MSC/Circ.648

[ 01.34 ]

PWI Width of escape stairways on passenger ships

[ 01.11 ]

ISO 15370:2001, Ships and marine technology - Low-Location Lighting on passenger ships-Arrangement ISO 17631:2002, Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape (see IMO-link-NR 14)

[ 01.22 ]

[ 01.35 ]

ISO 18813:2006, Ships and marine technology - Survival equipment for survival crafts and rescue boats

[ 01.37 ]

PWI Alternative sprinkler systems

[ 01.31 ]

PWI Standard for approving Halon alternative agents and fire extinguishing systems Alternative tanker design guidelines

[ 02.01 ] [ 02.08 ]

Vapour recovery

interest SC 3

[ 09.02 ]

ISO 2412:1982, Shipbuilding - Colours of indicator lights (see also IMO-Link-NR 7, 58)

[ 03.20 ]

ISO 9785:2002, Ships and marine technology - Ventilation of cargo spaces where internal combustion engine vehicles may be driven - Calculation of theoretical total airflow required


26

Application of plastic pipes on ships DE A.753 (18)

[ 03.30 ] [ 03.31 ] [ 03.32 ]

[ 03.33 ] [ 03.34 ]

27 28 29

30 31 32 33

34

35

36

37

ISO 15749-1:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design ISO 15749-2:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system ISO 15749-3:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems ISO 15749-4:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes ISO 15749-5:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools ISO 15840:2004, Ships and marine technology - Standard specification for Thermosetting resin fiberglass pipe and fittings to be used for marine applications

Guidelines for the on-board use of composite materials MSC/FP Anchoring systems for MODU DE

[ 03.40 ]

Requirements for safety assessment/risk analysis for offshore oil and gas exploration and exploitation industries DC Guidelines for the on board use and application of computers DE Interim Guidelines for wing-inGround craft MSC/Cir.1054 Hull stress monitoring system MSC/DE, MSC/Circ.646 Pressure/vacuum relief valves FP, BLG, MSC/Circ.677 Amended MSC/Circ.1002

[ 04.25 ]

NP 13819, Petroleum and natural gas industries-Offshore structures – Part 4: Floatingstructures

[ 09.15 ]

PWI Ships and marine technology - Wing In Ground (WIG) Craft

[ 08.23 ]

Hull stress monitoring systems (HSMS/ Voyage data recorder)

[ 03.25R ]

ISO/FDIS

Guidelines for the selection ,application and maintenance of corrosion prevention systems of seawater ballast tanks A.798(19) (draft) concerning corrosion prevention of dedicated seawater ballast tanks of new oil tankers and bulk SOLAS Reg. II-1/14-1 Guidelines for the application safety standards to pusher tug-barge MSC/Cir.866 Guidelines for the design, construction and operation of passenger submersible craft MSC/Cir.981 Design and operation of passenger ships to the needs of elderly and disabled persons DE

[ 03.25 ]

[ 03.44 ]

[ 08.24 ] [ 09.29 ]

15364, Ships and marine technology Pressure/vacuum valves for cargo tanks ISO/CD 28521, Ships and marine technology – Hydraulic oil systems – Guidance for grades of cleanliness and flushing ISO 15364:2000, Ships and marine technology Pressure/vacuum valves for cargo tanks Corrosion protection systems for seawater ballast tanks NP Ships and marine technology- Coating standard (see IMO-link-NR 87)

[ 09.16 ]

PWI Ships and marine technology - Combined pusher tug-barge safety standards

[ 09.17 ]

PWI Ships and marine technology- Guidelines for the design, construction and operation of passenger submersible craft


38

Guidelines for safe ocean towing DE/correspondence group

39

High speed craft (HSC) Code , see NR 47 and NR 49 MSC/DE SOLAS, X. MSC.36 (63) MSC.44 (65) MSC.45 (65) MSC/Circ.687

[ 01.38 ] [ 01.40 ] [ 04.27 ] [ 06.16 ] [ 06.19 ]

[ 06.15 ] [ 06.21 ] 40

41

42

43

44

45

Intact stability of double hull tankers SLF, MARPOL 73/78, Annex I, Reg. 25A Ro-Ro ferry safety SLF, 1995 SOLAS CONF.3/46, res. 14 A.794 (19) Pilot transfer arrangements NAV A.667(16) MSC/CIRC.568 RW1 SOLAS V Reg. 17 Application of computers in determining ship stability MSC/SLF

[ 09.19 ]

non

[ 01.33 ] [ 01.01 ] [ 01.02 ]

[ 01.12 ] Automatic pilots for HSC, see also NR 40 A.822 (19)

[ 03.26 ] [ 03.67 ] [ 03.27 ] [ 06.15 ]

48

49

PWI Ships and marine technology- Standards on Ro/Ro ferry safety

PRF 16848, Ships and marine technology - Pilot accommodation ladders ISO 799:2004, Shipbuilding - Pilot ladders ISO 5488:1979, Shipbuilding - Accommodation ladders

Guidelines for the application of systems protecting grease producing cooking equipment SOLAS 1974 II-2, FSS Code Fire resistance of hose assemblies DE/FP

46 47

[ 08.12 ]

PWI Design and operation of passenger ships to the needs of elderly and disabled persons PWI Risk analysis of escape routes Guidelines for safe ocean towing ISO 16328:2001, Ships and marine technology Gyro-compasses for high-speed craft (see IMO-link-NR 10, 48) ISO 16273:2003, Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results ISO 16329:2003, Ships and marine technology - Heading control systems for high-speed craft (see IMO-link-NR 47) ISO 17884:2004, Ships and marine technology - Navigation Searchlights for high speed craft ISO 5778:1998, Ships and marine technology - Small weathertight steel hatches

Gyro compasses for HSC, see also NR 40 A.821 (19) Testing of life saving appliances (see NR 19 and 53) A.689 (17) SOLAS 1974, 1983

[ 06.16 ]

ISO 15371:2000, Ships and marine technology - Fire extinguishing systems for protection of galley deep frying equipment - Fire tests ISO 15540:1999, Ships and marine technology - Fire resistance of hose assemblies - Test methods ISO 15540 Cor1:1999, Ships and marine technology - Fire resistance of hose assemblies - Test methods TECHNICAL CORRIGENDUM 1 ISO 15541:1999, Ships and marine technology - Fire resistance of hose assemblies - Requirements on the test bench ISO 16329:2003, Ships and marine technology - Heading control systems for high-speed craft (see IMO-link-NR 39) ISO 16328:2001, Ships and marine technology Gyro-compasses for high-speed craft (see IMO-link-NR 10, 39)


50

51

Ship manoeuvrability A.751 (18) Explanatory notes to the standards for ship manoeuvrability MSC/Cir.1053 Fleet management systems MSC

[ 09.13 ]

NP Ships and marine technology- Standards for manoeuvrability

[ 10.16 ]

ISO 15849:2001, Ships and marine technology - Guidelines for implementation of a fleet management system network ISO 15849 Amd1:2003, Ships and marine technology Guidelines for implementation of a fleet management system network AMENDMENT 1 ISO PAS 16917:2002, Ships and marine technology - Data transfer standard for maritime and intermodal transportation Effluent standards

[ 10.21 ] [ 10.17 ] 52 53

54

55 56

57 58

Effluent standards MEPC 38, 96-07-01/10 Wash bulkheads in cargo tanks for double hull oil tankers MEPC 38, 96-07-01/10 Hydrostatic release units SOLAS 1974, Ch. III Res. MSC.81 (70) LSA Code Service and maintenance of inflatable life rafts Gas inflation systems for inflatable Life-saving appliances SOLAS 1974, Ch. Res. MSC,81 (70) LSA Code Pyrotechnic distress signals SOLAS 1974, III LSA Code Life jackets lights and other position indicating lights SOLAS 1974, Ch. Res.MSC,81 (70)

[ 02.02 ] [ 01.13 ] [ 08.17 ] single-

[ 01.16 ]

ISO 15734:2001, Ships and marine technology - Hydrostatic release units

[ 01.18 ]

PRF 15735, Ships and marine technology - Service of inflatable liferafts – Training of servicing technicians and format of servicing records (see IMO-link-NR 67, 68) ISO 2412:1982, Shipbuilding - Colours of indicator lights (see also IMO-Link-NR 07, 23) ISO 15738:2002, Ships and marine technology - Gas inflation systems for inflatable life-saving appliances (see IMO-link-NR 67, 68) IEC 62065:2002 Maritimes navigation and radio communication equipment and systems - Track control systems Operational and performance requirements, methods of testing and required test results IEC 62065:2002, Maritimes navigation and radio communication equipment and systems - Track control systems Operational and performance requirements methods of testing and required test results ISO 15736:2006, Ships and marine technology - Pyrotechnic life-saving appliances – Testing, inspection, and marking of production units (see IMO-link-NR 78) PWI Electronically generated field of vision PWI Bridge watch alarm, central alarms and alarm management

[ 09.02 ] 59

Track control systems MSC74 (69)

[ 01.17 ] [ 06.18 ]

[ 06.18 ]

60

Electronic generated field of vision IMO A.694 (17)

61

Watch alarm and transfer system MSC.128 (75), Performance standards for a bridge navigational watch alarm system (BNWAS)

´ISO 15372:2000, Ships and marine technology - Inflatable rescue boats - coated fabrics for inflatable chambers ISO 6042:1998, Ships and marine technology - Weathertight leaf steel doors

[ 01.14 ] [ 06.38 ] [ 06.39 ]


62

63 64 65 66

Suitable design arrangements for container securing operations aboard ships DE 41, report 12.2 Engine-room fuel oil systems DE 41, report 16.23 Ship’s whistle COLREG 72 Annex III/3, Fireman’s outfit (see also item X2) SOLAS 1974, Ch. II-2, FSS Code Performance standard for Marine Transmitting Heading Devices MSC/Res.116 (73)

[ 01.41 ]

ISO 17339:2002, Ships and marine technology - Sea anchors for survival craft and rescue boats

[ 01.60 ]

ISO

[ 06.22 ] [ 06.22C ]

67

68

SOLAS V (19) 2.9.1 2.5.4

SOLAS 1974, Amendment, MSC 47 (66), LSA code [MSC. 48 (66)]

24408:2006, Ships and marine technology Position-indicating lights for life-saving appliances - Testing, inspection, and marking of production units ISO 22090-1:2002, Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses ISO 22090-1:2002/Cor1:2005, Ships and marine technology Transmitting heading devices (THDs) Gyro-compasses Technical

Part 1: corrigendum1 [ 06.28 ] ISO 22090-2:2004, Ships and marine technology - Transmitting Heading Devices (THDs) - Part 2 : Geomagnetic principles [ 06.28C ] ISO 22090-2:2004/Cor1:2005, Ships and marine technology Transmitting Heading Devices(THDs) – Part 2: Geomagnetic principles - Technical corrigendum1 [ 06.29 ] ISO 22090-3:2004, Ships and marine technology - Transmitting Heading Devices (THDs) - Part 3: GNSS principles [06.29C] ISO 22090-3:2004/Cor1:2005, Ships and marine technology-Transmitting Heading Devices(THDs) Part 3: GNSS principles - Technical corrigendum1 [ 01.17 ] ISO 15738:2002, Ships and marine technology - Gas inflation systems for inflatable life-saving appliances (see IMO-link-NR 59, 68) [ 01.18 ] PRF 15735, Ships and marine technology - Service of inflatable liferafts – Training of servicing technicians and format of servicing records (see IMO-link-NR 58, 68) [ 06.30 ] ISO 20672:2007, Ships and marine technology - Rate of turn indicators [ 06.26 ] ISO 20673:2007, Ships and marine technology - Electric rudder angle indicators [ 06.27 ] ISO 22554:2007, Ships and marine technology - Propeller shaft revolution indicators - Electric type and electronic type [ 06.31 ] ISO 22555:2007, Ships and marine technology - Propeller pitch indicators [ 01.17 ] ISO 15738:2002, Ships and marine technology - Gas inflation systems for inflatable life-saving appliances (see IMO-link-NR 59, 67) [ 01.18 ] PRF 15735, Ships and marine technology - Service of inflatable liferafts – Training of servicing technicians and format of servicing records (see IMO-link-NR 58, 67)


69

SOLAS -2, 1974 Amendment and MSC/ Cire.1097, 2003-10, Guideline relating the implementation of SOLAS Chapter -2 and the ISPS code MSC80/WP.7 Measures to enhance Maritime security

[ 00.01 ] [ 00.03 ]

[ 00.02P ] [ 00.01P ] [ 00.03P ] [ 00.02 ] [ 11.03P ] [ 11.04P ] [ 11.03 ] [ 11.04 ]

70

71

72

73

74

SOLAS 1974 Amendment and IMO A.830 (19), 861 (20) MSC163 (78) Fire Control Plans FP SOLAS 1974, Ch -2, Res. A.654(16) MSC/Circ. 1050 Breathing devices (see also item 76) SOLAS 1974, Ch -2 FSS Code IGC Code BHC Code FSS Code Chapter 3, Reg.2.2.3

[ 06.35 ]

[ 04.28 ]

Suitable design arrangements for container securing operations aboard ships

Pilot, embarkation accommodation Ladders SOLAS 1974, Ch.

[ 01.07 ]

ISO 7364:1983, Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches ISO 18770, Ships and marine technology - Machinery Space flammable oil systems - Guidelines to prevent leakage of flammable oil FDIS 5489, Shipbuilding - Embarkation ladders (Revision of ISO 5489:1986)

and

[ 03.47 ] [ 01.03R ]

75

ISO 28000, Specification for security management systems for the supply chain ISO 28003, Security management systems for the supply chain-Requirements for the bodies providing audit and certification of supply chain security management systems PAS 28004:2006Security management systems for the supply chain-Guidelines for the implementation of ISO\PAS28000 PAS 28000:2005Specification for security management systems for the supply chain PAS 28003:2006Security management systems for the supply chain-Requirements for bodies providing audit and certification of security management systems DIS 28004, Security management systems for the supply chain – Guidelines for the implementation of ISO/PAS 28000 ISO PAS 20858:2004, Ships and marine technology - Marine port facility security assessments and security plan development ISO PAS 28001:2006, Security management systems for the supply chain - Best practices for implementing supply chain security-Assessments and plans ISO/DIS 20858, Ships and marine technology - Maritime port facility security assessments and security plan development ISO/DIS 28001, Security management systems for the supply chain- Best Practices for implementing supply chain security - Assessments and plans requirements and guidance ISO 22472:2006, Ships and marine technology - Guideline for the operation and installation of voyage data recorder (VDR)

Structural Fire Protection Plan SOLAS 1974, Ch. -2


76

Escape routes marking SOLAS 1974, Ch. -2

[ 01.59 ] [ 01.55 ] [ 01.66 ] [ 01.67 ]

[ 01.68 ]

PRF 23269-1, Ships and marine technology - Breathing apparatus for ships - Part 1 - Emergency escape breathing devices (EEBB) for ship-board use DIS 22488, Ships and marine technology - Shipboard fire fighters' outfits ( Protective clothing, gloves, boots, and helmets ) ISO/AWI 23269-2, Ships and marine technology – Breathing apparatus for ships – Part 2 – Breathing apparatus for shipboard firefighters ISO/AWI 23269-3, Ships and marine technology - Breathing apparatus for ships - Part 3 - Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes ISO/NP 23269-4, Ships and marine technology- Breathing apparatus for ships – Part 4 : Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes ISO 7061:1993, Shipbuilding - Aluminium shore gangways for seagoing vessels

77

Means for accessing the ship

[ 01.06 ]

78

IMO/FP Flame detectors

[ 01.14 ]

ISO 15736:2006, Ships and marine technology - Pyrotechnic life-saving appliances – Testing, inspection, and marking of production units (see IMO-link-NR 60)

79

IMO/FP Thermal protective aids Performance standards for fire safety systems FTP Code Fire Test Procedures SOLAS 1974 ,reg3

SOLAS 1974 Chapter V, Regulation 15 Principles relating to bridge design... MSC/Circ.982 GUIDELINES ON ERGONOMIC CRITERIA FOR BRIDGE EQUIPMENT AND LAYOUT

[ 06.36 ]

ISO 8468:2007, Ships and marine technology - Ship’s bridge layout and associated equipment - Requirements and guidelines (see IMO-link-NR 15)

85

MSC.86(70) annex1, Sound Reception Systems from A.2 to A.1 of the Marine Equipment Directives

[ 06.41 ]

PWI Ships and marine technology - Sound reception systems

86

MEPC 54/4/3 Standardization for on shore power supply (cold ironing) SOLAS /6.3 Coating for ballast tank and double –side skin space SOLAS-1/3-2,

[ 03.67 ]

ISO/CD 29501, Ships and marine technology – Preservation of the environment – Cold ironing

[ 09.29 ]

NP Ships and marine technology- Coating standard (see IMO-link-NR 34)

IMO/FAL, Electronic Port Clearance

[ 10.22 ]

AWI 28005, Ships and marine technology - Electronic port clearance (EPC)

80 81

82

83 84

87

88

Fire Extinguishers SOLAS 1974, Ch. -2 FSS Code


89

90

MSC.95(72) Annex13, Performance Standards Daylight Signalling lamps SOLAS 1974,Ch.V-5

91

MEPC??(33)

[ 06.33 ]

PRF 25861, Ships and marine technology - Navigation - Daylight signaling lamps

[ 06.34 ]

WD 10596, Ships and marine technology - Marine wind vane and anemometers AWI 21071, Ships and marine technology - Oil water separators

for

[ 02.04 ]


Annex B Index on IMO Resolutions This index on IMO Resolutions and other relevant IMO documents refers to the IMO-link-NR according to annex A. IMO Resolution or document

IMO-link-NR

Title or subject

A.210 (VII) A.224 (VII) A.342 (IX) A.384 (X) A.424 (XI) A.477 (XII) A.603 (15) A.654 (16) A.667 (16) A.686 (17) A.689 (17)

NR 01 NR 06 NR 01 NR 11 NR 10 NR 11 NR 14 NR 71 NR 42 NR 23 NR 49, 60, 61, 79

A.694 (17)

NR 01, 04, 05, 10, 60

A.751 (18) MSC/Circ.1053 A.752 (18)

NR 50 NR 50 NR 17

A.753 (18) A.757 (18) A.760 (18) A.794 (19) A.798 (19)

NR 26 NR 16 NR 14 NR 41 NR 34

SOLAS, 11-1, Reg.14-1 MSC/Circ.866

NR 34

MSC/Circ.981

NR 36

Recommendation on steering gear for large ships Performance standards for echo sounding equipment Performance standards for Automatic Pilots Performance standards for radar reflectors Performance standards for gyro-compasses Performance standards for radar equipment Symbols related to life-saving appliances and Arrangements Graphical symbols for fire control plans Pilot transfer arrangements Code on alarms and indicators Testing of lifesaving appliances - Immersion suits, anti-exposure suits, thermal protective aids and marine evacuation systems (MES) General requirements for shipborne radio equipment forming part of the global maritime distress and safety system (GMDSS) and for electronic navigational aids Interim standards for ship manoeuvrability Explanatory notes to the standards for ship manoeuvrability Guide lines for the evaluation, testing and application of low location lighting (LLL) on passenger ships Guide lines for the application of plastic pipes on ships Widths of escape stairways on passenger ships Symbols related to life-saving appliances Surveys and inspections of ro-ro passenger ships Guide lines for the selection, application and maintenance of corrosion prevention systems of seawater ballast tanks (Draft) concerning corrosion prevention of dedicated seawater ballast tanks of new oil tankers and bulk carriers Guidelines for the application safety standards to pusher tug-barge Guidelines for the design, construction and operation of passenger submersible craft

A.800(19)

NR 19

A.821 (19) A.822 (19) A.830 (19) MEPC.54/4/3 MEPC.?? (33) MEPC.59 (33)

NR 48 NR 47 NR 70 NR 86 NR 91 NR 13

MSC.36 (63)

NR 39

MSC.44 (65) MSC.45 (65)

NR 39 NR 39

NR 35

Revised guide lines for approval of sprinkler systems equivalent to that referred to in SOLAS regulation II-2/12 which revoked resolution A.755 (18) Gyro-compasses for high-speed craft Automatic steering aids (automatic pilots) for high speed craft Code on alarms and indicators 1995 Standardization for on-shore power supply (Cold ironing) Oil water separators Revised guidelines for the implementation of Annex V of MARPOL 73/78 adopted on 30 October 1992 High speed craft (HSC) Code", made mandatory by new SOLAS chapter X Standards for fixed sprinkler systems for high speed craft Test procedures for fire-resisting divisions of high speed craft


IMO Resolution or document MSC.48 (66) MSC86 (70)Annex MSC.95 (72)Annex MSC/Circ.1050

IMO-link-NR

Title or subject

NR 09, 14, 18, 54, 56, 57, 58, 68, 78 NR 85 NR 89 NR 71

Adoption of the International Life-Saving Appliance (LSA) Code

NR 15 NR 42

Sound reception system Performance standard for daylight signalling lamps Guidance concerning the location of fire control plans for the assistance of shore-side fire-fighting personnel Trials on one man operated bridges may be executed Pilot transfer arrangements

MSC/Circ.566 MSC/Circ.568 Rev. 1 MSC/Circ.646

NR 32

MSC/Circ.648

NR 25

MSC/Circ.668

NR 20

MSC/Circ.687 MSC/Circ.699 SOLAS 1974, II, part B-2 SOLAS 1974, V SOLAS 1974, II, reg. 3 SOLAS 1974, II-1, reg. 29 and 30 SOLAS 1974, V

NR 39 NR 17 NR 03

Hull stress monitoring systems (HSMS)/voyage data recorders for ships. Guidelines for the operation, inspection and maintenance of ship sewage systems Alternative arrangements for halon fire-extinguishing systems in machinery spaces Emergency source of Power for category A high speed craft Revised guidelines for passenger safety instruction Bulk carrier safety

NR 15 NR 08, 81

Bridge equipment and lay out Fire test procedure

NR 01

Heading control systems

NR 10, 90

SOLAS 1981, V , reg. 12 SOLAS 1981, V , reg. 19 SOLAS 1995 resolution 14 SOLAS, II-1, reg.14-1 SOLAS, II-2 reg. FSS-3 SOLAS, II-2 Reg.3 MSC/Res. 116 (73)

NR 06

Marine gyro compasses, Marine anemometers Shipborne navigational equipment

NR 01

Heading control systems

NR 41

NR 76, 72

Regional arrangements on specific stability requirements for ro-ro passenger ships (draft) concerning corrosion prevention of dedicated seawater ballast tanks of new oil tankers and bulk carriers Fire fighters’ outfits

NR 80, 81, 82

Fire safety

NR 66

Performance standard for Marine transmitting Heading Devices Production testing of pyrotechnic

NR 49

wind

vane

and

MSC.8 (70) A689 (17) SOLAS V-19

NR 67

IMO A.861(20)

NR 70

SOLAS 1974

NR 68

SOLAS -2 SOLAS -2, 1974 Amendment SOLAS /6.3 IMO/FAL

NR 69

Carriage requirements for ship-borne navigational systems and equipment Performance standards for simplified voyage data recorders(VDRs) Adoption of amendments to the international convention for Amendment, LSA code [MSC. 48(66)] the safety of life at sea Implementation of SOLAS chapter -2 and THE ISPS Code

NR 87 NR 88

Coating for ballast tank and double –side skin space Electronic Port Clearance


Annex C Index on ISO standard numbers This index on ISO standard numbers refers to the internal ISO/TC 8 work item numbers used in this document and the IMO-link-NR’s according to Annex A.

Index Standard Number Standard

Title

work item IMO-link-NR

ISO 21:1985

Shipbuilding - Inland navigation - Cable-lifters for stud-link anchor chains

07.01

ISO 449:1997

Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class A

06.01

ISO 484-1:1981

Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: Propellers of diameter greater than 2,50 m

03.01

ISO 484-2:1981

Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive

03.02

ISO/R 538:1967

Conventional signs to be used in schemes for the installations of pipeline systems in ships

03.03

ISO 613:2000

Ships and marine technology - Magnetic compasses, binnacles and azimuth reading devices - Class B

06.02

ISO 614:1989

Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing

08.01

ISO/R 644:1967

Conventional signs to be used in schemes for the installation of ventilation systems in ships

03.04

ISO 694:2000

Ships and marine technology - Positioning of magnetic compasses in ships

06.03

ISO/R 784:1968

Conventional signs to be used in schemes for the installation of sanitary systems in ships

03.05

ISO 799:2004

Shipbuilding - Pilot ladders

ISO 1069:1973

Magnetic compasses and binnacles for sea navigation - Vocabulary

06.04

ISO 1095:1989

Shipbuilding and marine structures - Toughened safety glass panes for side scuttles

08.02

ISO 1704:1991

Shipbuilding - Stud-link anchor chains

04.01 04.01R

01.01, IMO-link-NR 43

FDIS 1704

Shipbuilding - Stud-link anchor chains

ISO 1751:1993

Shipbuilding and marine structures - Ships' side scuttles

08.03

ISO 1964:1987

Shipbuilding - Indication of details on the general arrangement plans of ships

09.01

ISO 2269:1992

Shipbuilding - Class A magnetic compasses, azimuth reading devices and binnacles - Tests and certification

06.05

ISO 2412:1982

Shipbuilding - Colours of indicator lights

ISO 3078:1987

Shipbuilding - Cargo winches

04.02

ISO 3254:1989

Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows

08.04

ISO 3372:1975

Shipbuilding - Inland vessels - Mushroom-type ventilator heads

07.02

ISO 3434:1992

Shipbuilding and marine structures - Heated glass panes for ships' rectangular windows

08.05

ISO 3434:1992Amd1

Shipbuilding and marine structures - Heated glass panes for ships' rectangular windows - Amendment 1

08.05A

ISO 3652:1975

Shipbuilding - Inland vessels - Rope reels

07.03

ISO 3674:1976

Shipbuilding - Inland vessels - Deck rail

07.04

ISO 3715-1:2002

Ships and marine technology - Propulsion plants for ships Part 1 : Terms and definitions for geometry of propellers

03.06

ISO 3715-2:2001

Ships and marine technology - Propulsion plants for ships - Part 2 : Vocabulary for controllable-pitch propeller plants

03.35

09.02, IMO-link-NR 7, 23, 58



Title


ISO 3730:1988

Shipbuilding - Mooring winches

04.03

ISO 3786:1975

Shipbuilding - Inland navigation vessels towing hooks - Scale of tractive efforts

07.05

ISO 3796:1999

Ships and marine technology - Clear openings for external single-leaf doors

08.06

ISO 3797:1976

Shipbuilding - Vertical steel ladders

08.07

ISO 3828

Shipbuilding and marine structures - Deck machinery - Vocabulary

04.04

ISO 3828

Shipbuilding and marine structures - Deck machinery - Vocabulary

04.04R

ISO 3876:1986

Shipbuilding - Inland vessels - Hand-holes

07.06

ISO 3902:1990

Shipbuilding and marine structures - Gaskets for rectangular windows and side scuttles

08.08

ISO 3903:1993

Shipbuilding and marine structures - Ships' ordinary rectangular windows

08.09

ISO 3904:1990

Shipbuilding and marine structures - Clear-view screens

08.10

ISO 3913:1977

Shipbuilding - Welded steel bollards

ISO 3913Add1:1980

Addendum 1: Double bollards for inland navigation

ISO 3926:1980

Shipbuilding - Inland navigation - Couplings for oil and fuel reception - Mating dimensions

07.08

ISO 3935:1977

Shipbuilding - Inland navigation - Fire-fighting water system - Pressures

07.09

ISO 3948:1977

Shipbuilding - Inland vessels - Compressed-air systems - Pressure ranges

07.10

ISO 3969:1979

Shipbuilding - Inland vessels - Operational documentation

07.11

ISO 4001:1977

Shipbuilding - Inland vessels - Raft-type life-saving apparatus

07.12

ISO 4050:1977

Shipbuilding - Inland vessels - "Rhine" and Hall's stockless anchors

07.13

ISO 4051:1977

Shipbuilding - Inland vessels - Steering gear - Values of torques

07.14

ISO 4085:1979

Shipbuilding - Inland navigation - Swing derricks

07.15

ISO 4089:1979

Shipbuilding - Inland navigation - Sealing rubber for covers of cargo hatches

07.16

ISO 4127-1:1979

Shipbuilding - Inland navigation - Fairleads - Part 1: Two-lip fairleads

07.17

ISO 4127-2:1980

Shipbuilding - Inland navigation - Fairleads - Part 2: Roller fairleads

07.18

ISO 4143:1981

Shipbuilding - Inland navigation - Open rowing lifeboats

07.19

ISO 4175:1979

Shipbuilding - Shipborne barges, series 1: Main dimensions

07.20

ISO 4568:2006

Shipbuilding - Sea going vessels - Windlasses and anchor capstans

04.05

ISO 5480:1979

Shipbuilding - Guard rails for cargo ships

08.11

ISO 5483:2003

Ships and marine technology - Drain plugs, welding rings, and gaskets for oil and water tank drains

03.07

ISO 5485:1986

Shipbuilding - Inland vessels - Fixed steel deck stairs

ISO 5488:1979

Shipbuilding - Accommodation ladders


FDIS 5489

Shipbuilding - Embarkation ladders

01.03R, IMO-link-NR 74

ISO 5572:1987

Shipbuilding and marine structures - Numbering of equipment and structural elements in ships

10.01

ISO 5620-1:1992

Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements

03.09

ISO 5620-2:1992

Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components

03.10

ISO 5621:1984

Shipbuilding - Bilge mud boxes for machinery spaces and tunnels - General design characteristics

03.11

ISO 5625:1978

Shipbuilding - Welded bulkhead pieces with flanges for steel pipe work - PN 6, PN 10 and PN 16

03.12

ISO 5778:1998

Ships and marine technology - Small weathertight steel hatches

ISO 5779:1987

Shipbuilding - Ordinary rectangular windows - Positioning

08.13

ISO 5780:1987

Shipbuilding - Side scuttles - Positioning

08.14

ISO 5797:2004

Ships and marine technology - Windows and side scuttles for fire-resistant constructions

ISO5797-1:1989

Shipbuilding and marine structure-Windows and side scuttles for fire resistant constructions-Specifications-Part1:'B'class divisions

07.07 07.07A

07.21


08.22, IMO-link-NR 08 08.15


Index Standard Number Standard ISO 5894:1999

Title


Ships and marine technology - Manholes with bolted covers

08.16

ISO/TR 5987:1984

Inland navigation - Water fire-fighting system - Couplings of fire hoses General technical requirements

07.22

ISO 6042 : 1998

Ships and marine technology - Weathertight single-leaf steel doors

ISO 6043:1985

Shipbuilding and marine structures - Eye and fork assemblies under tension load - Main dimensions

04.06

ISO 6044:1985

Shipbuilding and marine structures - Derrick boom heel fittings - Main dimensions

04.07

ISO 6045:1987

Shipbuilding and marine structures - Bearings for derrick goosenecks Assemblies and components

04.08

ISO 6050:1987

Shipbuilding - Bulbous bow and side thruster symbols

ISO/TR 6065:1991

Shipbuilding and marine structures - Inflatable liferafts - Materials

ISO 6115:1988

Shipbuilding - Trawl winches

04.09

ISO 6205:1988

Inland navigation vessels - Customs sealing systems - Basic technical requirements

07.23

ISO 6216:1980

Shipbuilding - Inland navigation - Pilot craft - Classification and basic requirements

07.24

ISO 6217:1982

Shipbuilding - Inland navigation - Pilot craft - Identification painting and inscriptions

07.25

ISO 6218:2005

Ships and marine technology - Inland navigation vessels - Manually operated coupling devices for push tows-safety requirement and main dimensions

07.26

ISO 6219:1983

Shipbuilding - Inland vessels - Windlasses and anchor capstans

07.27

ISO 6325:1987

Shipbuilding - Cable stoppers

04.10

ISO 6345 : 1990

Shipbuilding and marine structures - Windows and side scuttles - Vocabulary

08.18

ISO 6454:1984

Shipbuilding - Strum boxes

03.13

NP 6482

Shipbuilding - Deck machinery - Warping end profiles (Revision of ISO 6482:1980)

ISO 6482:1980

Shipbuilding - Deck machinery - Warping end profiles

04.11

ISO 6555:1988

Shipbuilding - Topping winches

04.12

ISO 6582:1983

Shipbuilding - Numerical control of machines - ESSI format

10.02

ISO 6764:1985

Shipbuilding - Shipborne barges, series 1 - Lifting post casting - Arrangement, dimensions and method of testing

07.28

ISO 6765:1985

Shipbuilding - Shipborne barges, series 3 - Main dimensions

07.29

ISO 6766:1984


07.30

ISO 6812:1983

Roll on/Roll off ship to shore connection - Interface between terminals and ships with straight stern/bow ramps

04.13

ISO 7061:1993

Shipbuilding - Aluminium shore gangways for seagoing vessels

CD DAM 7061:1993

Ships and marine technology - Pedestrian access equipment for ships( Revision of ISO 7061:1993 )

ISO 7221:1984

Shipbuilding and marine structures - Shipborne barges, series 1, on barge carriers - Principal technical requirements

07.31

ISO 7222:1985


07.32

ISO 7236:1991

Inland navigation vessels - Demountable signal masts for push-tows - Mounting attachment

07.33

ISO/AWI7240-26

Oil mist detectors

ISO 7255:1985

Shipbuilding - Active control units of ships - Vocabulary

ISO 7364:1983

Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches

ISO 7365:1983

Shipbuilding and marine structures - Deck machinery - Towing winches for deep sea use

04.14

ISO 7460:1983

Shipbuilding - Shiplines - Identification of geometric data

10.03

ISO 7461:1984

Shipbuilding - Shiplines - Numerical representation of elements of the hull geometry

10.04


09.08 01.04,IMO-link-NR 09

04.11R

01.06, IMO-link-NR 77 01.06DAM

07.34 01.07, IMO-link-NR 74



Title


ISO 7462:1985

Shipbuilding - Principal ship dimensions - Terminology and definitions for computer applications

10.05

ISO 7463:1990

Shipbuilding - Symbols for computer applications

10.06

ISO 7545:1983

Shipbuilding and marine structures - Inland navigation - Single-lock automatic couplings for push tows

07.35

ISO 7547:2002

Ships and marine technology - Air-conditioning and ventilation of accommodation spaces on board ships - Design conditions and basis

03.14

NP 7547:2002

Ships and marine technology- Air conditioning and ventilation of accommodation spaces on board ships- Design conditions and basis calculations

ISO 7606:1988

Shipbuilding - Inland navigation vessels - Draught scales

07.36

ISO 7607:1984

Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket capacities

07.37

ISO 7608:1985

Shipbuilding - Inland navigation - Couplings for disposal of oily mixture and sewage water

07.38

PWI 7824

Ships and marine technology - Lubrication nipples - Cone and flat types(Revision of ISO 7824:1986)

ISO 7824:1986

Shipbuilding and marine structures - Lubrication nipples - Cone and flat types

PWI 7825

Shipbuilding - Deck machinery - General requirements (Revision of 7825:1985)

03.14R

04.15R 04.15 04.16R

ISO 7825:1985

Shipbuilding - Deck machinery - General requirements

04.16

ISO 7838:1984

Shipbuilding - Shiplines - Formats and data organization

10.07

ISO 8146:1985

Shipbuilding and marine structures - Oval eye plates

ISO 8146:1985

(Revision of ISO 8146:1985)

ISO 8147:1995

Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary

ISO 8148:1985

Shipbuilding and marine structures - Derrikboom headfittings - Fixed type

ISO 8148:1985

Shipbuilding and marine structures - Derrick boom headfittings - Fixed type

04.19

ISO 8193:1984

Shipbuilding - Shell plating information

10.08

ISO 8277:1988

Shipbuilding - Pipework - Information transfer

10.09

ISO 8303:1985

Shipbuilding - Shipborne barges, series 3 - Main operational and technical requirements

07.39

ISO 8304:1984

Shipbuilding - Shipborne barges, series 3 - Ventilation system - Principal mating dimensions

07.40

ISO 8314:1987

Shipbuilding and marine structures - Trunnion pieces for span bearings and lead block bearings

04.20

ISO 8384:2000

Ships and marine technology - Dredgers - Vocabulary

07.41

ISO 8385:1999

Ships and marine technology - Dredgers - Classification

07.42

ISO 8431:1988

Shipbuilding - Fixed jib cranes - Ship-mounted type for general cargo handling

04.21

ISO 8468

Ships and marine technology- Ship's bridge layout and associated equipment Requirements and guidelines

06.36R, IMO-link-NR 15, 84

ISO 8728:1997

Ships and marine technology - Marine gyro-compasses

WD 8729-1

Ships and marine technology-Marine radar reflector (Revision of ISO 8729:1997)


WD 8729-2

Ships and marine technology-Marine radar reflector (Revision of ISO 8729:1997)


ISO 8729:1997

Ships and marine technology - Marine radar reflectors

ISO 8861:1998

Shipbuilding - Engine room ventilation in diesel-engined ships - Design requirements and basis of calculations

03.15

ISO 8861:1998

Shipbuilding- Engine room ventilation in diesel-engined ships-Design requirements and basis of calculations

03.15

ISO 8862:1987

Air-conditioning and ventilation of machinery control-rooms on board ships Design conditions and basis of calculations

03.16

ISO 8863:1987

Ship's wheelhouse windows - Heating by hot air of glass panes

03.17

ISO 8864:1987

Air-conditioning and ventilation of wheelhouse on board ships - Design conditions and basis of calculations

03.18

04.17 04.17R 04.18 04.19R





Title


PWI 9089

Marine structures - Mobil offshore units - Anchor winches

04.22R

ISO 9089:1989

Marine structures - Mobile offshore units - Anchor winches

04.22

ISO 9099:1987

Air-conditioning and ventilation of dry provision rooms on board ships - Design conditions and basis of calculations

03.19

ISO 9203-1:1989

Shipbuilding - Topology of ship hull structure elements - Part 1: Location of elements

10.10

ISO 9203-2:1989

Shipbuilding - Topology of ship hull structure elements - Part 2: Description of elements

10.11

ISO 9203-3:1989

Shipbuilding - Topology of ship hull structure elements - Part 3 : Relations of elements

10.12

NP 9367-1

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - general requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (Revision of ISO9367-1:1989)

04.23R

ISO 9367-1:1989

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - general requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded

04.23

NP 9367-2

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers (Revision of ISO 9367-2:1994)

04.24R

ISO 9367-2:1994

Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships - General requirements - Part 2: Semi-trailers

04.24

ISO 9382:1990

Shipborne barges, all series - Classification and main requirements

07.43

ISO 9437:1986

Shipbuilding - Inland vessels - Matrosov anchors

07.44

ISO 9519:1990

Shipbuilding and marine structures - Rungs for dog-step ladders

ISO 9785:2002

Ships and marine technology - Ventilation of cargo spaces where internal combustion engine vehicles may be driven - Calculation of theoretical total airflow required


ISO 9875:2000

Ships and marine technology - Marine echo-sounding equipment


ISO9875/Corl:2006

Ships and marine technology-Marine echo-sounding equipment- Technical corrigendum1 06.08C, IMO-link-NR 06

ISO 9876:1997

Ships and marine technology - Marine facsimile receivers for meteorological charts

06.09

ISO 9943:1991

Shipbuilding - Ventilation and air-treatment of galleys and pantries with cooking appliances

03.21

ICD9943:1991

Ships and marine technology - Ventilation and air treatment of galleys and pantries with cooking appliances

ISO10316:1990

Shipbuilding - Class B magnetic compasses - Tests and certification

06.10

WD 10596

Ships and marine technology – Marine wind vane and anemometers


ISO AWI 11208

Ships and marine technology – Large yachts - windows and port-lights – Strength and water tightness

12.03

ISO AWI 11209


12.04

ISO AWI 11336


12.01

ISO AWI 11347

Ships and marine technology – Large yachts – Measurement and analysis of the visual appearance of coasting

12.02

08.19

03.21R

ISO11606/Corl:2005

Ships and marine technology-Marine electromagnetic compasses- Technical corrigendum1 06.11C, IMO-link-NR 05

ISO11606:2000

Ships and marine technology - Marine electromagnetic compasses


ISO11674:2006

Ships and marine technology - Heading control systems


ISO/TR13298:1998

Ships and marine technology - Vocabulary of general terms

ISO13617:2001

Ships and marine technology - Shipboard incinerators - Requirements

09.09 03.22, IMO-link-NR 13



Title


NP13819

Petroleum and natural gas industries - Offshore structures - Part 4 : Floating structures

ISO/TR14564:1995

Shipbuilding and marine structures - Marking of escape routes

ISO14612:2004

Ships and marine technology - Ship's bridge layout and associated equipment Requirements and guidelines for centralized and integrated bridge functions

ISO/FDIS14726

Ships and marine technology-Identification colours for the content of piping systems


ISO14726-1:1999

Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media


ISO14726-2:2002

Ships and marine technology - Identification colours for the content of piping systems - Part 2: Additional colours for media and/or functions


ISO15016:2002

Ships and marine technology - General requirement - Guidelines for the assessment of speed and power performance by means of sea trial data

09.10

04.25, IMO-link-NR 29 01.08, IMO-link-NR 14 06.37, IMO-link-NR 15, 84

ISO/FDIS15364

Ships and marine technology - Pressure/vacuum valves for cargo tanks


ISO15364:2000

Ships and marine technology - Pressure/vacuum valves for cargo tanks


ISO15370:2001

Ships and marine technology - Low-Location Lighting on passenger ships-Arrangement


ISO15371:2000

Ships and marine technology - Fire extinguishing systems for protection of galley deep frying equipment - Fire tests


ISO15372:2000

Ships and marine technology - Inflatable rescue boats - coated fabrics for inflatable chambers


ISO15401:2000

Ships and marine technology - Bulk carriers - Construction quality of hull structure


ISO15402:2000

Ships and marine technology - Bulk carriers - Repair quality of hull structure


ISO15516:2006

Ships and marine technology - Launching appliances for davit-launched lifeboats

04.26

ISO15540:1999

Ships and marine technology - Fire resistance of hose assemblies - Test methods


NP15540:1999

Ships and marine technology-Fire resistance of hose assemblies-Test methods

03.26R

ISO15540Cor.1:1999

Ships and marine technology-Fire resistance of hose assemblies-Test methods technical corrigendum1

03.26c, IMO-link-NR 47

ISO15541:1999

Ships and marine technology-Fire resistance of hose assemblies-Requirements on the test bench

03.27

NP15541:1999

Ships and marine technology-Fire resistance of hose assemblies-Requirements on the test bench

03.27R

ISO15541:1999

Ships and marine technology - Fire resistance of hose assemblies Requirements on the test bench

ISO15583:2005

Ships and marine technology - Maritime standards list

ISO15734:2001

Ships and marine technology - Hydrostatic release units

PRF15735

Ships and marine technology - Service of inflatable liferafts - Training of servicing technicians and format of servicing records

ISO15736:2006

Ships and marine technology - Pyrotechnic distress signals - Testing, inspection and marking of production unites

ISO15738:2002

Ships and marine technology - Gas inflation systems for inflatable life-saving appliances

ISO15748-1:2002

Ships and marine technology - Potable water supply on ships and marine structures - Part 1 : Planning and design

03.28

ISO15748-2:2002

Ships and marine technology - Potable water supply on ships and marine structures - Part 2 : Method of calculation

03.29

NP15749-1:2004

Ships and marine technology- Drainage systems on ships and marine structures-Part1:Sanitary drainage-system design

03.27, IMO-link-NR 47 09.11 01.16, IMO-link-NR 57 01.18, IMO-link-NR 58, 67, 68 01.14, IMO-link-NR 60 01.17, IMO-link-NR 59, 67, 68

03.30R



Title

ISO15749-1:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design


ISO15749-2:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 2 : Sanitary drainage, drain piping for gravity system


NP15749-2:2004

Ships and marine technology- Drainage systems on ships and marine structures- Part2:Sanitary drainage, drain piping for gravity system

03.31R

NP15749-3:2004

Ships and marine technology- Drainage systems on ships and marine structures-Part3:Sanitary drainage, drain piping for vacuum systems

03.32R

ISO15749-3:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 3 : Sanitary drainage, drain piping for vacuum systems


NP15749-4:2004

Ships and marine technology- Drainage systems on ships and marine structures-Part4:Sanitary drainage, sewage disposal pipes

03.33R

ISO15749-4:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 4 : Sanitary drainage, sewage disposal pipes


NP15749-5:2004

Ships and marine technology-Drainage systems on ships and marine structures-Part5:Drainage of decks, cargo spaces and swimming pools

03.34R

ISO15749-5:2004

Ships and marine technology - Drainage systems on ships and marine structures - Part 5 : Drainage of decks, cargo spaces and swimming pools


ISO15837:2004

Ships and marine technology - Gasketed mechanical couplings for use in piping systems - Performance specification

03.41

ISO15838:2003

Ships and marine technology - Fittings for use with gasketed mechanical couplings used in piping applications-Performance specification

03.42

ISO15840:2004

Ships and marine technology - Standard specification for Thermosetting resin fibreglass pipe and fittings to be used for marine applications


ISO15849 Amd1:2003

Ships and marine technology - Guidelines for implementation of a fleet management system network AMENDMENT 1


ISO15849:2001

Ships and marine technology - Guidelines for implementation of a fleet management system network


ISO16155:2006

Ships and marine technology - Shipboard loading instrument

10.15

ISO16165:2001

Ships and marine technology - Marine environment protection - Terminology relating to environmental response

02.30

ISO16273:2003

Ships and marine technology - Night vision equipment for high-speed craft Operational and performance requirements, methods of testing and required test results


WD16288

Ships and marine technology - Mechanical seals for shipboard pump applications

ISO16328:2001

Ships and marine technology-Gyro compasses for high speed craft

ISO16329:2003

Ships and marine technology - Heading control systems for high-speed craft

ISO16446:2002

Ships and marine technology - Marine environment protection - Oil spill booms Adapter for joining dissimilar (oil spill boom) connectors

PRF16848

Ships and marine technology - Pilot accommodation ladders


ISO PAS16917:2002

Ships and marine technology - Data transfer standard for maritime and intermodal transportation


DIS17338

Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions


ISO17339:2002

Ships and marine technology - Sea anchors for survival craft and rescue boats


ISO17357:2002

Ships and marine technology - High - pressure floating pneumatic rubber fenders

ISO/AWI17631

Ships and marine technology-Shipboard plans for fire protection, life-saving appliances and means of escape

ISO17631:2002

Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape Ships and marine technology - Navigation - Searchlights for high speed craft

01.22, IMO-link-NR 14, 17

Ships and marine technology - Computer applications - General principles for the development and use of programmable electronic systems in marine

10.14

ISO 17884:2004 ISO 17894:2005


03.37 06.16, IMO-link-NR 10, 39, 48 06.15, IMO-link-NR 39, 47 02.31

09.23


ISO/TC8 N1000 R12 Status report page 60 applications


Title


CD17896

Ships and marine technology - Marine environment protection - Mechanical equipment for oil spill response - Booms

02.38

CD17897

Ships and marine technology - Marine environment protection - Mechanical equipment for oil spill response - Part 2: Skimmers

02.42

ISO17899:2004

Ships and marine technology - Marine electric window wipers

06.40

FDIS18072-1

Ships and marine technology-Ship Structures - Part1:General requirements for their limit state assessment

08.27

CD18072-2

Ships and marine technology-Ship Structures- Part2 : Requirements for their ultimate strength limit state assessment

08.28

ISO18770:2005

Ships and marine technology - Machinery Space flammable oil systems Guidelines to prevent leakage of flammable oil


ISO18813:2006

Ships and marine technology - Survival equipment for survival crafts and rescue boats


ISO19018:2004

Ships and marine technology - Terms, abbreviations and graphical symbols and concepts on navigation

09.24

ISO19019:2005

Ships and marine technology - Guide for planning, carrying out and reporting sea trials

09.25

ISO/DIS19292

Ships and marine technology - Point-type resetable flame detectors for ships

01.69

ISO19379:2003

Ships and marine technology - ECS databases - Content, quality, updating and testing

06.20

ISO19921:2005

Ships and marine technology - Fire resistance of gasketed mechanical couplings for use in piping systems - Test methods

03.49

ISO19922:2005

Ships and marine technology - Fire resistance of gasketed mechanical couplings for use in piping systems - Requirements imposed on the test bench

03.50

ISO20672

Ships and marine technology-Rate of turn indicators


ISO20673

Ships and marine technology-Electric rudder angle indicators


ISO/DIS20858

Ships and marine technology - Maritime port facility security assessments and security plan development


ISO PAS20858:2004

Ships and marine technology - Marine port facility security assessments and security plan development

11.03P, IMO-link-NR 81

ISO21005:2004

Ships and marine technology -Thermally toughened safety-glass panes for windows and side scuttles

08.25

CD21070

Ships and marine technology - Ships board handling of ship generated garbage

02.46

AWI21071

Ships and marine technology - Oil water separators

FDIS21072-1

Ships and marine technology - Marine environmental protection- Performance testing of oil skimmers-Part1: Moving water conditions

02.47

FDIS21072-2

Ships and marine technology-Marine environmental protection-Performance resting of oil skimmers-Part2: Static water conditions

02.49

FDIS21072-3

Ships and marine technology-Marine environmental protection-Performance Testing of oil skimmers-High viscosity oil

02.50

ISO22090-1:2002

Ships and marine technology - Transmitting heading devices (THDs) - Part 1 : Gyro-compasses


ISO22090-1:Cor1:2005

Ships and marine technology-Transmitting heading Devices (THDs) - Part1:Gyro-compasses-Technical corrigendum1

06.22C, IMO-link-NR 66

ISO22090-2/Cor1:2005

Ships and marine technology-Transmitting Heading Devices (THDs)-Part2:Geomagnetic principles-Technical corrigendum1

06.28C, IMO-link-NR 66

ISO22090-2:2004

Ships and marine technology - Transmitting Heading Devices (THDs) Part 2 : Geomagnetic principles


ISO22090-3:2004

Ships and marine technology - Transmitting Heading Devices (THDs) Part 3 : GNSS principles


ISO22090-3/Corl:2005

Ships and marine technology-Transmitting Heading Devices(THDs)-Part3:GNSS principles- Technicalcorrigendum1

ISO22472:2006

Ships and marine technology - Guideline for the operation and installation of


06.29C, IMO-link-NR 66 06.35, IMO-link-NR 70



Title


voyage data recorder (VDR) DIS22488

Ships and marine technology - Shipboard firefighters' outfits ( Protective clothing, gloves, boots, and helmets )


ISO22554:2007

Ships and marine technology - Propeller shaft revolution indicators - Electric type and electronic type


ISO22555:2007

Ships and marine technology - Propeller pitch indicator


FDIS22673

Ships and marine technology-Launching appliances for free-fall lifeboats

ISO/PAS22853:2005

Ships and marine technology - computer applications specifications MSML (Marine Safety Mark-up Language)

AWI23268

Ships and marine technology - Oil barriers - Test and certification

PRF23269-1

Ships and marine technology - Breathing apparatus for ships - Part 1 Emergency escape breathing devices (EEBB) for ship-board use


ISO/AWI23269-2

Ships and marine technology - Breathing apparatus for ships - Part 2 Breathing apparatus for shipboard firefighters


ISO/AWI23269-3

Ships and marine technology - Breathing apparatus for ships - Part 3 Self-contained breathing apparatus (safety equipment) required for IMO IBC and IGC Codes


ISO/AWI 23269-4

Ships and marine technology - Breathing apparatus for ships - Part 4 : Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes


ISO24408:2006

Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection, and marking of production units


ISO/NP24409-1

Ships and marine technology - Design, location, and use of shipboard signs for fire protection, life-saving appliances, and means of escape

01.45

ISO/AWI24409-2

Ships and marine technology-Design, location, and use of shipboard signs for fire protection, life-saving appliances, and means of escape-Code of practice

01.70

ISO/AWI 24409-3

Ships and marine technology - Design, location, and use of shipboard signs for fire protection, life-saving appliances, and means of escape- Code of practice

01.71

DIS24432

Ships and marine technology - Thermal protective aids with sleeves

PRF25861

Ships and marine technology - Daylight signalling lamps

CD25862

Ships and marine technology-Marine magnetic compasses, azimuth reading devices and binnacles for steering

06.32

ISO/AWI27991

Marine evacuation systems-Means of communication

01.61

ISO/AWI27992

Ships and marine technology-Marine evacuation systems-Means of communication

ISO/AWI27993

Guidelines for development of instructions for action in survival craft

01.73

ISO/AWI27994

Ships and marine technology-Standard operating method for pyrotechnic distress signals

01.76

04.30 10.21P 02.48

01.57 06.33, IMO-link-NR 89

ISO/AWI27995

Fixed aerosol fire extinguishing systems for ships

DIS28000

Specification for security management systems for the supply chain

00.01, IMO- link-NR 69

01.65

PAS28000:2005

Specification for security management systems for the supply chain


ISO/DIS28001

Security management systems for the supply chain-Best Practices for implementing supply chain security - Assessments and plans requirements and guidance

ISO PAS28001:2006

Security management systems for the supply chain-Best practices for implementing supply chain security-Assessments and plans

ISO28003

Security management systems for the supply chain-Requirements for the bodies providing audit and certification of supply chain security management systems

PAS28003:2006

Security management systems for the supply chain-Requirements for bodies providing audit and certification of security management systems

DIS28004

Security management systems for the supply chain -- Guidelines for the implementation of ISO/PAS 28000


PAS28004:2006

Security management systems for the supply chain - Guidelines for the implementation of ISO\PAS28000


AWI28005

Ships and marine technology - Electronic port clearance


11.04P, IMO-link-NR 69 00.03, IMO-link-NR 69 00.03P, IMO-link-NR 69




Title

ISO/CD28520

Ships and marine technology - Lubricating oil systems - Guidance for grades of cleanliness and flushing

ISO/CD28521

Ships and marine technology - Hydraulic oil systems - Guidance for grades of

work item IMO-link-NR 03.43 03.44, IMO-link-NR 33

cleanliness and flushing ISO/CD28522

Ships and marine technology - Hydraulic oil systems - Guidance for assembling and flushing

03.45

ISO/CD28523

Ships and marine technology - Sampling from lubricating oil and hydraulic oil systems - Guidance for sampling of representative samples for determination of degree of cleanliness and for solid particle contamination

03.46

ISO/CD29501

On-shore Power Supply, 'Cold ironing'


IEC62065:2002

Maritimes navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements methods of testing and required test results



Annex D The allocation of the numbers of work items to the Sub Committees is as follows:(between brackets: number of revisions) TC8 / WG TC8 / Sub committee

TC 8/WG 1 Ships recycling TC8/WG2 Security Management SC 1 Lifesaving and Fire Protection SC 2 Environment SC 3 Piping/machinery SC 4 Outfitting SC 6 Navigation SC 7 Inland vessels SC 8 Structures SC 9 General SC 10 Computer applications SC 11 Intermodal and short sea shipping SC12 Large Yachts

Published Standards

Work items Registered

Possible new work items

Total

8

3

11

5

1

17 (11)

20 (3)

20

40 (3)

2 41 25 33 44 21 9 17 2 (PAS)

8 8 3 5 (2) 0 2 0 1 (PAS)

18 22 (9) 12 (7) 3 1 5 10

26 30 (12) 15 (7) 8 (3) 1 7 10 2 1 (PAS)

2 (PAS)

2

0

0

0

4

0

4

61 (5) 1 (PAS)

96 (16)

157 (31) 1 (PAS)

ISO 214 PAS 4

1

2


Annex E The IMO-link-NR's are assigned to the ISO/TC 8 Subcommittees and IMO bodies as follows: TC 8

IMO Res.

TC8/ WG1 WG2

MSC (SOLAS)

FP

DE

NAV

SLF

COMS

16, 17, 20, 27, 46, 76

9, 14, 18, 19, 37, 74

21, 22, 52, 91 2, 24, 25, 26

SC 3 SC 4

49

68

SC 6

47, 48, 60

1, 5, 59, 61, 66, 70, 84, 85, 89

SC 7 SC 8

IMO MSC FP DE NAV SLF COMS MEPC BLG FAL

FAL

43

SC 2

SC 10 SC11

BLG

xxx 69 23, 54, 55, 56, 57, 58, 71, 72, 73, 75, 76, 77, 78, 79, 80, 82

SC 1

SC 9

MEPC

7, 50

3, 23, 31, 35, 58 51 69

33, 45

2, 13, 45, 47, 63 28, 38, 62 39

8,

22

86

1, 5, 6, 10, 11, 15, 67, 90

4

3, 32, 34

40

36, 87

41

30

43

International Maritime Organization—Resolution, etc. Maritime Safety Committee—including SOLAS Code Fire Protection-- including Code Design and equipment—including Code Safety of Navigation—including Code Stability and Loadlines and Fishing vessels Safety Radio communication and Search and Rescue Marine Environment Protection Committee Bulk Liquids and Gases Facilitation

88


Annex F Explanation of current stage abbreviation Stage

Abbreviation

Description

00 Preliminary Stage

PWI PWI TS PWI Amd

Preliminary Work Item for anew International Standard or a revision Preliminary Work Item for a Technical Specification Preliminary Work Item for an Amendment

10 Proposal Stage

NP NP Amd NP Cor. NP TS NP Suppl.

New Work Item Proposal for a new International Standard or a revision New Work Item Proposal for an Amendment New Work Item Proposal for a Technical Corrigendum New Work Item Proposal for a Technical Specification New Work Item Proposal for a Supplement

AWI

Approved Work Item for anew International Standard or a revision, no working draft yet available. Approved proposal for an Amendment, nor working draft yet available Approved proposal for an Technical Report or Technical Specification, no working draft yet available.

20.00 20 Preparatory Stage 20.20

30 Committee Stage

40 Enquiry Stage 50 Approval Stage

60 Publication Stage

90 Review Stage

AWI Amd AWI TR or TS WD WD Amd WD TR or TS

Working Draft of a new International Standard or a revision Working Draft of an Amendment Working Draft of a Technical Report or Technical Specification

CD CD Amd CD Cor. CD TR or TS CD Suppl. DTR or TS

Committee Draft of a new International Standard or a revision Committee Draft of an Amendment Committee Draft of a Technical Corrigendum Committee Draft of a Technical Report or Technical Specification Committee Draft of a Supplement Draft Technical Report or Draft Technical Specification

DIS D Amd

Draft International Standard (new International Standard or a revision) Draft Amendment

FDIS FDAmd PRF PRF Amd PRF TR or TS PRF Suppl.

Final Draft International Standard (new International Standard or a revision) Final Draft Amendment Proof of a new International Standard or of a revision Proof of an Amendment Proof of a Technical Report or Technical Specification Proof of a Supplement

ISO ISO/TR ISO/TS Amd. Cor.

International Standard (Includes revisions) Technical Report Technical Specification Amendment Technical Corrigendum Series of codes reserved for actions relating to already published ISO standards, etc. (see ISO/IEC Directives, Part 1, annex H.1, 1995 for a complete list and descriptions)


Matrix presentation of project stages SUB-STAGE 00

20

60

Registration

Start of main action

Completion of main action 00.60 Review summary circulated

10.00 Proposal for new project registered

00.20 Proposal for new project under review 10.20 New project ballot initiated

20.00 New project registered in TC/SC work programme 30.00 Committee draft (CD) registered

20.20 Working draft (WD) study initiated 30.20 CD study/ballot initiated

20.60 Comments summary circulated

40.00 DIS registered

40.20 DIS ballot initiated: 5 months

50.00 FDIS registered for formal approval

STAGE

00 Preliminary stage

10 Proposal stage

20 Preparatory stage 30 Committee stage

40 Enquiry stage

50 Approval stage

60 Publication stage

90 Review stage

95 Withdrawal stage

00.00 Proposal for new project received

10.60 Voting summary circulated

90 Decision 92 Repeat an earlier phase

10.92 Proposal returned to submitter for further definition

98 Abandon

99 Proceed

00.98 Proposal for new project abandoned

00.99 Approval to ballot proposal for new project 10.99 New project approved

10.98 New project rejected

20.98 Project deleted

30.60 Comments/ voting summary circulated 40.60 Voting summary dispatched

30.92 CD referred back to Working Group 40.92 Full report circulated: DIS referred back to TC or SC

50.20 FDIS ballot initiated: 2 months. Proof sent to secretariat

50.60 Voting summary dispatched. Proof returned by secretariat 60.60 International Standard published

50.92 FDIS referred back to TC or SC

90.20 International Standard under periodical review

90.60 Review summary dispatched

90.92 International Standard to be revised

95.20 Withdrawal ballot initiated

95.60 Voting summary dispatched

95.92 Decision not to withdraw International Standard

60.00 International Standard under publication

93 Repeat current phase

30.98 Project deleted 40.93 Full report circulated: decision for new DIS ballot



90.93 International Standard confirmed

20.99 WD approved for registration as CD 30.99 CD approved for registration as DIS 40.99 Full report circulated: DIS approved for registration as FDIS 50.99 FDIS approved for publication

90.99 Withdrawal of International Standard proposed by TC or SC 95.99 Withdrawal of International Standard


Annex G Participation table TC8 Country

Member body

Australia (SAI) Austria (ON) Belgium (IBN) Brazil (ABNT) Bulgaria (BDS) Canada(SCC) China (SAC) Croatia (DZNM) Cuba (NC) Czech Republic (CNI) Denmark (DS) Finland (SFS) France (AFNOR) Germany (DIN) Greece (ELOT) Hong Kong (ITCHKSAR) Hungary (MSZT) India (BIS) Indonesia (BSN) Iran, Islamic Republic of (ISIRI) Ireland(NSAI) Israel (SII) Italy (UNI) Japan (JISC) Korea, Dem. P. Rep.of (CSK) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Pakistan (PSQCA) Panama( COPAINT) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Serbia and Montenegro(ISSM) Singapore (SPRING SG) Slovakia (SUTN) Spain (AENOR) Sweden (SIS) Thailand (TISI) Tunisia (INNORPI) Turkey (TSE) Ukraine (DSSU) United Kingdom (BSI) Uruguay (UNIT) USA (ANSI) Viet Nam (TCVN)

SA ON IBN ABNT BD SCC SAC DZNM NC CNI DS SFS AFNOR DIN ELOT ITCHKSAR MSZT BIS BSN ISIRI NSAI SII UNI JISC CSK KATS NEN SN PSQCA COPAINT PKN IPQ ASRO GOST R ISSM SPRING SG SUTN AENOR SIS TISI INNORPI TSE DSSU BSI UNIT ANSI TCVN

P O O O O O P O P P P O O P O O O P O P O P P S O P P P O P P O P P O P O P P O O P P P O P O

2005-09-06

2005-09-29

2005-06-14

2006-10-18

2005-08-15


SC 1 Country

Member body

Australia (SAI) Austria (ON) Belgium (IBN) Bulgaria (BDS) Canada(SCC) China (SA\C) Croatia (DZNM) Cuba (NC) Czech Republic (CSNI) Denmark (DS) Finland (SFS) France (AFNOR) Germany (DIN) Greece (ELOT) India (BIS) Israel (SII) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Pakistan (PSQCA) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Sweden (SIS) Switzerland (SNV) Turkey (TSE) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

SAI ON IBN BDS SCC SAC DZNM NC CSNI DS SFS AFNOR DIN ELOT BIS SII UNI JISC KATS NEN SN PSQCA PKN IPQ ASRO GOST R SUTN AENOR SIS SNV TSE DSSU BSI ANSI

O O P O P P O O O P O O P O P O P P P P O O O P O P O O P O O P P S

2005-09-29


SC 2 Country

Member body

Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Denmark (DS) France (AFNOR) Finland (SFS) Germany (DIN) India (BIS) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

BDS SAC DZNM NC DS AFNOR SFS DIN BIS UNI JISC KATS NEN SN PKN IPQ ASRO GOST R SUTN AENOR DSSU BSI ANSI

O P O O O O P P O P P P P O O P O P O O O P S

SC 3 Country

Member body

Brazil (ABNT) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Denmark (DS) France(AFNOR) Germany (DIN) India (BIS) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Switzerland (SNV) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

ABNT BDS SAC DZNM NC DS AFNOR DIN BIS UNI JISC KATS NEN SN PKN IPQ ASRO GOST R SUTN AENOR SNV DSSU BSI ANSI

O O P O O P O P O P P P P O O P O P O O P P P S

2006-02-24


SC 4 Country

Member body

Austria (ON) Belgium (IBN) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Czech Republic (CSNI) Denmark (DS) Finland (SFS) France(AFNOR) Germany (DIN) Greece (ELOT) India (BIS) Italy (UNI) Japan (JISC) Korea, Dem. P. Rep. of (CSK) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Pakistan (PSQCA) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Turkey (TSE) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

ON IBN BDS SAC DZNM NC CSNI DS SFS AFNOR DIN ELOT BIS UNI JISC CSK KATS NEN SN PSQCA PKN IPQ ASRO GOST R SUTN AENOR TSE DSSU BSI ANSI

O O O S O P O O O O P O O P P P P P O O O O P P O O O P P P


SC 6 Country

Member body

Belgium (IBN) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Denmark (DS) Finland (SFS) France (AFNOR) Germany (DIN) Hungary (MSZT) Israel (SII) India (BIS) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

IBN BDS SAC DZNM NC DS SFS AFNOR DIN MSZT SII BIS UNI JISC KATS NEN SN PKN IPQ ASRO GOST R SUTN AENOR DSSU BSI ANSI

O O P O O O P O P O O O P S P P O O O P P O O O P P

SC 7 Country

Member body

Austria (ON) Belgium (IBN) Brazil (ABNT) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Czech Republic (CSNI) Denmark (DS) Germany (DIN) India (BIS) Italy (UNI) Japan (JISC) Korea, Dem. P. Rep. of (CSK) Korea, Republic of (KATS) Netherlands (NEN) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

ON IBN ABNT BDS SAC DZNM NC CSNI DS DIN BIS UNI JISC CSK KATS NEN PKN IPQ ASRO GOST R SUTN AENOR DSSU BSI ANSI

O O O O P O P P O P P P O O P O O O P S O O O P P


SC 8 Country

Member body

Australia (SAI) Belgium (IBN) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Denmark (DS) Finland (SFS) France (AFNOR) Germany (DIN) Greece (ELOT) India (BIS) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Serbia and Montenegro(ISSM) Singapore (SPRING SG) Slovakia (SUTN) Spain (AENOR) Turkey (TSE) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

SAI IBN BDS SAC DZNM NC DS SFS AFNOR DIN ELOT BIS UNI JISC KATS NEN SN PKN IPQ ASRO GOST R ISSM SPRING SG SUTN AENOR TSE DSSU BSI ANSI

O P O P O O O P P P O P P P S P O O P O P O P O O P P P P


SC 9 Country

Member body

Austria (ON) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Czech Republic (CNI) Denmark (DS) Finland (SFS) France(AFNOR) Germany (DIN) India (BIS) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Slovakia (SUTN) Spain (AENOR) Turkey (TSE) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

ON BDS SAC DZNM NC CNI DS SFS AFNOR DIN BIS UNI JISC KATS NEN SN PKN IPQ ASRO GOST R SUTN AENOR TSE DSSU BSI ANSI

O O P O O O O O O P O P S P P O P P O P O O P O P P

2006-10-18


SC 10 Country

Member body

Belgium (IBN) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Denmark (DS) Finland (SFS) France (AFNOR) Germany (DIN) India (BIS) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands Norway Panama Poland Portugal Russian Federation Slovakia Spain Sweden Turkey Ukraine United Kingdom USA

IBN BDS SAC DZNM NC DS SFS AFNOR DIN BIS UNI JISC KATS NEN SN COPAINT PKN IPQ GOST R SUTN AENOR SIS TSE DSSU BSI ANSI

O O P O P O O O P P O P P O S P O P P O O P O O P P


SC 11 Country

Member body

Belgium (NBN) Bulgaria (BDS) China (SAC) Croatia (DZNM) Cuba (NC) Czech Republic (CSNI) Denmark (DS) Finland (SFS) France (AFNOR) Germany (DIN) Greece (ELOT) India (BIS) Israel (SII) Italy (UNI) Japan (JISC) Korea, Republic of (KATS) Netherlands (NEN) Norway (SN) Pakistan (PSQCA) Poland (PKN) Portugal (IPQ) Romania (ASRO) Russian Federation (GOST R) Serbia and Montenegro(ISSM) Singapore (SPRING SG) Spain (AENOR) Sweden(SIS) Turkey (TSE) Ukraine (DSSU) United Kingdom (BSI) USA (ANSI)

NBN BDS SAC DZNM NC CSNI DS SFS AFNOR DIN ELOT BIS SII UNI JISC KATS NEN SN PSQCA PKN IPQ ASRO GOST R ISSM SPRING SG AENOR SIS TSE DSSU O BSI ANSI

P P O O P O P O P P O P O P P P P O O O P P P O P S P O P P

2005-04-08


SC 12 Country

Member body

Australia Belgium China Czech Republic France Germany India Israel Italy Japan Netherlands Russian Federation Spain Ukraine United Kingdom USA

SA IBN SAC CNI AFNOR DIN BIS SII UNI JISC NEN GOST R AENOR DSSU BSI ANSI

P P P O P P P P S O P O O O P P


Annex H Sub Committee Chairman/Secretary Sub Committee Memberbody

Title E-mail

Chairman/Secretary

ISO/TC 8 USA SAC, China

Ships and marine technology [email protected] [email protected]

Charles H. Piersall Yanqing Li

ISO/TC 8/AG USA

ISO/TC 8 Advisory Group [email protected]

Charles H. Piersall

ISO/TC 8/SC 1 Italy ANSI, USA

Lifesaving and fire protection [email protected] [email protected]

Claudio Abbate George Grills

ISO/TC 8/SC 2 Japan ANSI, USA

Marine environment protection [email protected] [email protected]

Koichi Yoshida Patnaik Bivan

ISO/TC 8/SC 3 USA ANSI, USA

Piping and machinery [email protected] [email protected]

Joseph A. Byrne Thane Gilman

ISO/TC 8/SC 4 China SAC, China

Outfitting and deck machinery [email protected] [email protected]

Xiaochuan Tong Zhen Liu

ISO/TC 8/SC 6 Japan JISC, Japan

Navigation [email protected] [email protected]

Shogo Hayashi Kosei Hasegawa

ISO/TC 8/SC 7 Russian Fed. GOST R, Russian Fed.

Inland navigation vessels [email protected] [email protected]

Yuri N. Rumiantev Vladimir Y. Beylinson

ISO/TC 8/SC 8 Rep. of Korea KATS, Rep of Korea

Structures [email protected] [email protected]

Jeong Je Kim Byeong Cheol Choi

ISO/TC 8/SC 9 Japan JISC, Japan

General requirements [email protected] [email protected]

Tsuyoshi Yahagi Yoshihito Tominaga

ISO/TC 8/SC10 Norway SN, Norway

Computer applications [email protected] [email protected]

Ørnulf Jan Rødseth Jan Frank Ulvås

ISO/TC 8/SC11 Rep. of Korea AENOR, Spain

Intermodal and short sea shipping [email protected] [email protected]

Jae Wook Lee Luz Smith Rodriguez

ISO/TC 8/SC12 Italy UNI, Italy

Large Yachts [email protected] [email protected]

Luigi Scarpati Emilio Tremolada


Annex I Liaison list for ISO/TC 8 and TC 8 Subcommittees Committee TC 8

Organization

Category

IMO ISO/TC 28 ISO/TC 67 ISO/TC 108 ISO/TC 154 ISO/TC 184 ISO/TC 204 CEN/TC 15 EC IACS IAPH ILO IMPA SNAME INTER TANKO ICS WCO WSC ITN ICOMIA IFIA ISMA IMSO

A A A A A A A A A A A A A A A A A A A A A A A

Recipient ANSI, API Washington ANSI, API Washington

DIN

TC 8/SC 1 ISO/TC 21 ISO/TC 92/SC 1 ISO/TC 94 ISO/TC 145/SC 2 ISO/TC 188 IACS ICOMIA IMO (FP)* ITN IMPA EMSA

BSI BSI SAA DIN SIS – SMS Askebro A A A A A B

TC 8/SC 2 TC 146 TC 147 TC 207 IMO (MEPC)* OCIMF ICS INTERTANKO ITN

DIN DIN SCC A A A A A

TC 8/SC 3 IEC/TC 18 TC 10/SC 10 TC 67/SC 6 TC 70

A SIS – SMS Askebro AFNOR BSI


TC 138 TC 192 IACS IMO (DE)* SNAME (SMC) ITN

JISC ANSI A A A A

TC8 /SC 4 TC 22 TC 96/SC 8 TC 178/WG 1 TC 67/SC 7 IMO (DE) IACS ITN

AFNOR – BNA BSI-SCC AFNOR A B A

TC 8/SC 6 IEC/TC 80 CIRM IALA IMO (NAV)* ITU ITN WSC

A A A A A A

TC 8/SC 7 TC 188 IEC/TC 18 CEN/TC 15 CCR CD CIPA IADC UN/ECE IACS

SIS – SMS Askebro A A A A A A A B

TC 8/SC 8 TC 35 TC 67/SC 7 TC 108 TC 156 IACS IMO (BLG)* ITN

A A A

IACS ITN WSC

B A A

NEN BSI ANSI GOST-R

TC 8/SC 9

TC 8/SC 10 TC154 TC184 TC184/SC4 TC204 IEC/TC18 IEC/TC80 IACS ITN EMSA

AFNOR ANSI – NIST/MSID/ANSI – DISA ANSI A A B A B


TC 8/SC 11 TC22 TC104 TC145 TC204 IEC/TC18 IMO (FAL/SPI)* EC-DGET PIANC ICHCA ITN

AFNOR ANSI BSI ANSI A A A A A A

ICOMIA

A

TC 8/SC 12

•

IMO *: Any SCs who need to deal with IMO Matters must go exclusively via the Chairman to insure coordination and integration within ISO/TC8 and all SCs.

•

In each case where a SC needs liaison with an external body or other TC, the coordination will be through the TC or SC named as principal interface in this document. This document establishes the "lead SC /TC concept" where we will insure a coordinated and unified TC8 position. Any liaison difficulties arising will be referred to the Chairman, ISO/TC8 for resolution.

Draft_2009

Recommend Documents