Catia v5 Assemblies Procedures

APC002

AIRBUS INDUSTRIE Procedure

ASSEMBLIES PROCEDURES

SCOPE:

Activities for creation of assemblies, components inclusion and positioning, as well as calculation of interferences, tolerances, tolerances, etc. to be performed on CATIA Version 5 (CATProduct) are described in this procedure. Also, the interface with Optegra is described.

Owner’s Approval:

Name Function

: An A ntonio Navarro : -

Authorization: Date

:-

Name Function

: : -

Airbus Industrie 1999. All rights reserved. This document contains Airbus Industrie proprietary information and shall at all times remain the property of Airbus Industrie; no intellectual property right or licence is granted by Airbus Industrie in connection with any information contained in it. It is supplied on the express condition that said information is treated as confidential, shall not be used for any purpose p urpose other than that for which it is supplied, shall not be disclosed in whole or in part, to third parties other than the Airbus Members Members and Associated Partners, their subcontractors and suppliers (to the extent of their involvement in Airbus www.cadfamily.com projects), without Airbus Industrie’s prior written consent. 

The document is for study only,if any tort to your rights,Please inform us,we will delete it Issue: A Contact:[email protected]

Date: Jan 2001

Page 1 of 31

APC002

AIRBUS INDUSTRIE ASSEMBLIES

Contents 1 INTRODUCTION ......................................................................................... .........................................................................................4 4 2 NOMENCLATURE ...................................................................................... 5 3 STRUCTURE OF THE SPECIFICATIONS SPECIFICATIONS TREE ....................................... ....................................... 5 3.1 Nodes customisation ..............................................................................................6 3.2 Applications node....................................................................................................6

4 CREATION OF ASSEMBLIES....................................................................7 4.1 Creation of a new CATProduct...............................................................................7 4.2 Input of CATProduct CATProduct properties properties ..................... ................................ ..................... ..................... ...................... ...................... ............. ..8 8 4.3 Perform the Save option in the Modlocal ......................... ........... ........................... .......................... ........................ ........... 8 4.4 Perform a store in the Vault....................................................................................9 4.5 Create a CATProduct from an Optegra PS ........................... ............. ........................... .......................... .................. .....10 10

5 INSERTION OF COMPONENTS............................................................... COMPONENTS............................................................... 12 5.1 Single level assembly............................................................................................12 5.2 Multi-level assembly..............................................................................................16 5.2.1 Part component components s insertion insertion ............................ ........................................... ............................. ............................. .............................. .................. ... 16 5.2.2 Subassemb Subassemblies lies insertion.......................... insertion........................................... .................................. ................................. ................................. ................. 17

5.3 Assembly with V4 elements..................................................................................18 5.4 Assembly common to different departments......................................................18

6 COMPONENTS POSITIONING.................................................................19 7 STANDARD PARTS PARTS ................................................................................. 20 7.1 Insertion Insertion of standard standard parts ...................... .................................. ....................... ...................... ...................... ....................... ................20 ....20 7.2 Standard parts positioning .......................... ............. .......................... ......................... ......................... .......................... ................... ...... 21

8 SYMMETRICAL ASSEMBLY.................................................................... 26 www.cadfamily.com The document is for study only,if any tort to your rights,Please inform us,we will delete it Issue: A Contact:[email protected]

Date: Jan 2001

Page 2 of 31

APC002


Contents 1 INTRODUCTION ......................................................................................... .........................................................................................4 4 2 NOMENCLATURE ...................................................................................... 5 3 STRUCTURE OF THE SPECIFICATIONS SPECIFICATIONS TREE ....................................... ....................................... 5 3.1 Nodes customisation ..............................................................................................6 3.2 Applications node....................................................................................................6

4 CREATION OF ASSEMBLIES....................................................................7 4.1 Creation of a new CATProduct...............................................................................7 4.2 Input of CATProduct CATProduct properties properties ..................... ................................ ..................... ..................... ...................... ...................... ............. ..8 8 4.3 Perform the Save option in the Modlocal ......................... ........... ........................... .......................... ........................ ........... 8 4.4 Perform a store in the Vault....................................................................................9 4.5 Create a CATProduct from an Optegra PS ........................... ............. ........................... .......................... .................. .....10 10

5 INSERTION OF COMPONENTS............................................................... COMPONENTS............................................................... 12 5.1 Single level assembly............................................................................................12 5.2 Multi-level assembly..............................................................................................16 5.2.1 Part component components s insertion insertion ............................ ........................................... ............................. ............................. .............................. .................. ... 16 5.2.2 Subassemb Subassemblies lies insertion.......................... insertion........................................... .................................. ................................. ................................. ................. 17

5.3 Assembly with V4 elements..................................................................................18 5.4 Assembly common to different departments......................................................18

6 COMPONENTS POSITIONING.................................................................19 7 STANDARD PARTS PARTS ................................................................................. 20 7.1 Insertion Insertion of standard standard parts ...................... .................................. ....................... ...................... ...................... ....................... ................20 ....20 7.2 Standard parts positioning .......................... ............. .......................... ......................... ......................... .......................... ................... ...... 21

8 SYMMETRICAL ASSEMBLY.................................................................... 26 www.cadfamily.com The document is for study only,if any tort to your rights,Please inform us,we will delete it Issue: A Contact:[email protected]

Date: Jan 2001

Page 2 of 31

AIRBUS INDUSTRIE

APC002

ASSEMBLIES

8.1 Symmetrical Parts .................................................................................................26 8.2 Parts in symmetrical position...............................................................................26

9 BOM.......................................................................................................... BOM .......................................................................................................... 27 10 MODIFICATIONS....................................................................................27 11 TOLERANCES........................................................................................27 12 INTERFERENCES .................................................................................. 27 References References ........................ ................................... ....................... ........................ ....................... ....................... ........................ ....................... .....................28 ..........28 Glossary Glossary ....................... ................................... ........................ ....................... ....................... ........................ ....................... ....................... ........................ ..............29 ..29 Approval and Authorisation .......................................................................................30 Issue records records ....................... ................................... ....................... ....................... ........................ ....................... ....................... ........................ ..................31 ......31

www.cadfamily.com The document is for study only,if any tort to your rights,Please inform us,we will delete it Issue: A Contact:[email protected]

Date: Jan 2001

Page 3 of 31

AIRBUS INDUSTRIE

APC002

ASSEMBLIES

1 INTRODUCTION Activities for creation of assemblies, components inclusion and positioning, as well as calculation of interferences, tolerances, etc. to be performed on CATIA Version 5 (CATProduct) are described in this procedure


Date: Jan 2001

Page 4 of 31

AIRBUS INDUSTRIE

APC002

ASSEMBLIES

2 NOMENCLATUR E Nomenclature for files making up the assembly, (CATPart, CATProduct, V4 Models) is defined in the procedure AP2610 Naming and numbering for new projects. Nomenclature to be used on the different elements generated during the assembly activities (Scenes, Interferences, Constraints, etc.), will be the default naming and numbering given by the system.

3 STRUCTURE OF THE SPECIFICATIONS TREE The specifications tree is split into four main parts: • • • •

Parts group: Parts grouping Subassemblies group: Subassemblies grouping Constraints Node: Node containing the different relationships between parts made with constraint elements Applications Node: Node containing the applications carried out in the CATProduct, (e.g. Calculation of interferences, Scenes, Hyperlinks, etc.)

The sequence of these parts in the specifications tree is shown in the image below:

Parts

Subassemblies

Constraints Applications


Date: Jan 2001

Page 5 of 31

APC002


3.1 Nodes customis ation Nodes of the files making up the assembly shall show the Part number of the part or the assembly they represent, (Part number includes revision level) and the name of such a file.

Part number

Name

3.2 Applications nod e The applications node is the node grouping all the applications carried out in the CATProduct within the structure of the specifications tree, (e.g. Calculation of interferences, Scenes, Hyperlinks, etc.) This nodes is created automatically whenever any of the DMU activities is performed, and after created, any new application carried out shall be included, also automatically, in this node.


Date: Jan 2001

Page 6 of 31

AIRBUS INDUSTRIE

APC002

ASSEMBLIES

4 CREATION OF A SSEMBLIES As a general procedure, steps to be followed to create an assembly are as follows: • • • •

Create New CATProduct Modify the name of the part in the Properties section Perform Save option, in directory bdm/a3xxn/cXXXXX… (Modlocal directory) Perform a store in the Vault

4.1 Creation of a new CATProduct •

Select option New from the File menu

•

In the creation window New, select the type Product from the list of V5 elements types


Date: Jan 2001

Page 7 of 31

APC002


4.2 Input of CATProd uct properties After the above CATProduct creation steps have been completed, it is necessary to provide the CATProduct with a Part Number as well as filling in the necessary data on the assembly: Revision, Nomenclature, Source, Description, etc., for this purpose, select the properties section in the deployable menu.

Properties

Part Number Data to be filled in

4.3 Perform the Save option in the Modlocal After the CATProduct has been created and the necessary properties have been changed, it has to be saved in the user's modlocal directory: bdm/a3xxn/user. For this purpose, select the Save option in the File menu.


Date: Jan 2001

Page 8 of 31

APC002


4.4 Perform a store i n the Vault

After the CATProduct has been saved in the user's Modlocal directory, a Store of this CATProduct in the Vault has to be performed. The following are the steps to be followed: •

Open the Optegra Data Browser window

•

Select the CATProduct to be stored in the Vault and select the Local+Store option from the deployed menu

•

Select the work Project from the window and include the ACE-DESCRIP and press OK. Project

ACE-DESCRIP

Below is shown the result, in the Vault tab

Element filed in the Vault


Date: Jan 2001

Page 9 of 31

APC002


4.5 Create a CATPro duct from an Optegra PS When conversion of an Optegra PS into a CATProduct is required, there exists an executable that converts any PS into a CATProduct. Process is as shown below: • •

Open the Optegra PS to be converted Select Tools + Catia interface + Create Product. There are three options, Selected, Highlighted and All. Select the one desired.

•

Select Prepare Product in the Interface Epd to CATIA V5 window

•

A listing of processed and non-available elements will be displayed


Date: Jan 2001

Page 10 of 31

APC002


•

In Catia V5 select the icon Epd to Catia V5

Epd to Catia V5

•

The user will be prompted for confirmation, click OK if right, otherwise click cancel and review the selection performed

•

Final result is as follows


Date: Jan 2001

Page 11 of 31

APC002


5 INSERTION OF C OMPONENTS The component insertion process will basically be the same for all types of assemblies • • • • •

Signout the work assembly from the VAULT Open the work assembly, in the write model, from the Modlocal From the VAULT, oOpen the element to be inserted, CATProduct or CATPart in a different window Split the screen in two vertical or horizontal windows Copy the element to be inserted and paste it into the wok assembly

Option Insert+Existing Component may be used sometimes if elements to be inserted are available in the Modlocal, because a Get or a Read of these elements has already been performed, but only in these two cases.

5.1 Single level asse mbly A single level assembly includes parts only and no other sub-assemblies. Below is the components insertion process in a single level assembly:


Date: Jan 2001

Page 12 of 31

APC002

AIRBUS INDUSTRIE ASSEMBLIES •

Sign out the assembly from the Vault, for this purpose, select the assembly first and then the Vault+Get Latest Rev option from the scroll down menu in the Vault tab from the Data Browser window.

Select

•

Confirm the operation and verify that the process was correct and the element is assigned to the user and in the Modlocal

Correct process

Element assigned

Confirmation

•

Open the assembly from the Modlocal. In the Data Browser, select the assembly from the Local tab, Select Custom+Open CatiaV5 option from the scroll down menu and confirm.


Date: Jan 2001

Page 13 of 31 Confirmación

APC002


•

Select the icon Load_Documents from the Catia V5 window to read the CATProduct from the Modlocal Select

•

Open the parts to be inserted from the Vault, following the same procedure for opening the CATProduct


Date: Jan 2001

Page 14 of 31

APC002


Component to be inserted Work assembly

•

Copy component from the part window and paste into the assembly. The component can also be taken from the part window and dragged to the assembly window

Copy from the window of component to be inserted

Paste in the work assembly window

Operation outcome


Date: Jan 2001

Page 15 of 31

APC002


The other procedure to insert elements into an assembly is inserting an existing component. This component should be available in the Modlocal, because a Get or a Read from the VAULT has alreadybeen performed on this component. Follow the steps below to include it: •

Select the Insert+Existing Component option, the window to insert an existing element opens

•

Search for the element to be inserted by means of a String search in the Modlocal directory

•

Select the component to be inserted and click on the OK button. Component to be inserted

Search string

Outcome of operation

5.2 Multi-level assem bly A multi-level assembly includes part components as well as subassemblies. The following is the component insertion process in a multi-level assembly, distinguishing part components insertion from assemblies insertion

5.2.1 Part components insertion The same process as that used for single level assemblies shall be followed for the insertion of part elements: • • • •

Sign out Open the work assembly Open the element to be inserted Split the screen into two windows


Date: Jan 2001

Page 16 of 31

APC002


Copy part component from its window and paste it in the work assembly

•

5.2.2 Subassemblies insertion Two types of subassemblies are distinguished when they are to be inserted, small assemblies and large assemblies. Small assemblies insertion shall be made by visualisation thereof and large assemblies insertion shall be made without visualisation. The following is the assembly insertion process without visualisation •

Open the work CATProduct without visualisation

To open a CATProduct without visualisation, Options is selected from the Tools menu. Select Product+Product Structure, from the window opening up and select option: Do not activate default shapes on open as shown in image below:

Icon to be selected

Open the CATProduct to be included from the Vault, do it also without geometry visualisation Copy the assembly to be included and paste it into the work assembly .

• •

Work assembly

•

Assembly to be included (without visualisation

Replace assembly in the Vault


Date: Jan 2001

Page 17 of 31

APC002


5.3 Assembly with V4 elements Process to include V4 elements in an assembly shall be as follows: • • • • •

Sign out assembly in Vault Open it from the Modlocal Perform a Read Latest Rev on the V4 element to be included Insert V4 element as an existing component from the Modlocal directory Replace assembly in the Vault

Processes stated in above paragraphs shall be used to include V5 elements into the same assembly, either for parts or subassemblies.

5.4 Assembly comm on to different departments When it is necessary to create an assembly including subassemblies from different departments to perform a clash detection, or to perform different mock-up activities, the process stated in Multi-level assembly shall be adhered to.


Date: Jan 2001

Page 18 of 31

APC002


6 COMPONENTS P OSITIONING TBD


Date: Jan 2001

Page 19 of 31

APC002


7 STANDARD PAR TS 7.1 Insertion of stan dard parts Follow steps below to incorporate standard parts into an assembly: •

Open assembly wherein standard parts are to be included

•

Select the catalogue browser icon and pick work catalogue

Catalogue

Catalogue browser icon

•

Select the desired standard part from the listing

•

Deploy the options menu with the right mouse button and select option Copy

•

On the assembly node select Paste

Standard part may be selected and dragged to the CATProduct node with the same result •

Position the standard part within the assembly


Date: Jan 2001

Page 20 of 31

APC002


7.2 Standard parts p ositioning Standard parts positioning depends on supporting geometry on which they are to be located. The following classification has been established based on the support.

• • •

Along a direction. Supporting on flat surfaces. Supported on surfaces

Positioning of repeated standard parts along a direction. The following is the process to be followed: • • • •

• •

• •

Locate the standard part in the tree in the traditional manner. It therefore stays in its 0,0,0 position. Approach it to the support by means of the snap option, selecting any point in the standard part and any other point in the support. Position it in its final position using snap, constrains or compass. Select option fast multinstantiation definition and the following window opens up:

Select the standard part as element to instantiate. Select the type of parameters desired to provide, the number of standard parts, spacing between each other or total spacing between the first and the last ones in the parameters tab (two out of the three ones have to be selected). Enter the values of the selected parameters. Enter direction in which parameters are located. It may be an edge, a flat surface, etc.


Date: Jan 2001

Page 21 of 31

APC002


Multinstantiation Direction First standard part positioning

Standard parts positioned according to a direction

Positioning of standard parts supported on flat surfaces.

Dealing with flat surfaces, there are two positioning alternatives, depending on whether patterns exist or not. Process is as follows if there are preset patterns: •

Position the first standard part in the same manner as in the above paragraph (snap, constrains or compass) located in the feature (hole) origin for the pattern. (It is assumed a pattern has been created for each different type of standard part).


Date: Jan 2001

Page 22 of 31

APC002


•

Select the pattern usage icon

•

•

Select the one corresponding to the standard part selected as pattern. Select the standard part. Select the reuse the original pattern option from the first instance on pattern flap. Activate selected from the re-use constraints options.

•

Finally, update results.

• •

and the following definition window opens up.


Date: Jan 2001

Page 23 of 31

APC002


Should there be no patterns, standard parts are positioned one by one using constraints, snap or the compass

Standard parts positioning laying on surfaces.

First of all it is necessary to have the hole feature (in addition to the positioning point) created on the support in each location the standard part is to be positioned, in order to facilitate the process. The following is the process to be followed: •

After the standard part to be positioned is located in the tree structure, it is approached to the support by means of the snap function, selecting one point in the standard part and another one in the support.

•

Perform a multi-instantiation of as many repeated standard parts as necessary in any direction. Move to the coincidence option and select the hole centre line and the standard part centre line for each standard part and with the same option, select the standard part bearing surface and the support point. Repeat the process for each standard part.

•

•

Note: If the surface was ruled, there is the possibility to use the multi- instantiation if standard parts are located along one of the rules of the surface.


Date: Jan 2001

Page 24 of 31

APC002


Methodology for standard parts positioning. The table below states the methodology for standard parts positioning as a function of the type of assembly and the support:

ALONG ONE DIRECTION

ON FLAT SURFACES

RULED SURFACES

DOUBLE CURVATURE SURFACES

Rivets

NO NO

POINTSMULTINS POINTSMULTINS POINTSMULTINS POINTSMULTINS

POINTS

Nut Plates

PATTERN & POINTS PATTERN & POINTS PATTERN & POINTS PATTERN & POINTS

MULTI-INSTANTIATION PATTERNCONSTRAINTS MULTI-INSTANTIATION PATTERNCONSTRAINTS MULTI-INSTANTIATION PATTERNCONSTRAINTS MULTI-INSTANTIATION PATTERNCONSTRAINTS

CONSTRAINTSMULTINS CONSTRAINTSMULTINS CONSTRAINTSMULTINS CONSTRAINTSMULTINS

CONSTRAINTS, ONE BY ONE CONSTRAINTS, ONE BY ONE CONSTRAINTS, ONE BY ONE CONSTRAINTS, ONE BY ONE

Supports for attachment to structures ELECTRIC SYSTEMS

MULTI-INSTANTIATION PATTERNCONSTRAINTS

CONSTRAINTS- CONSTRAINTS, MULTINS ONE BY ONE

Supports for attachment to structures MECHANIC SYSTEMS



Supports for attachment to structures



STRUCTURES General. Above 20 std

Nut-screwwasher ClampsSupports Small. Less than 20 std Rivets Nut Plates Nut-screwwasher ClampsSupports HYDRAULIC SYSTEMS

POINTS POINTS POINTS


Date: Jan 2001

Page 25 of 31

APC002


8 SYMMETRICAL A SSEMBLY

8.1 Symmetrical Par ts

8.2 Parts in symmet rical position


Date: Jan 2001

Page 26 of 31

APC002


9 BOM 10 MODIFICATIONS 11 TOLERANCES 12 INTERFERENCE S


Date: Jan 2001

Page 27 of 31

APC002


References


Date: Jan 2001

Page 28 of 31

APC002


Glossary MDU

User's Manual


Date: Jan 2001

Page 29 of 31

APC002


Approval and Authorisation Approval

Authorisation


Date: Jan 2001

Page 30 of 31

Catia v5 Assemblies Procedures

Recommend Documents