all samsung unlock codes
E2120
EEPROM RESET *2767*3855# #7465625*638*00000000# not done + input code
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Just tested with new one J700 T429 F250 g600 and e250 e390 j700 c180 E250V E250V from PL PLUS 100% WORKING !! 1-Turn on the phone without sim card . 2-Pull off the battery cover and insert any non-accepted sim card (without turning off the handset) 3-Do full reset *2767*3855# , phone will reboot and goes to Menu . 4-Customize Sp-lock code *7465625*638*00000000*00000000# 5-Unlock your phone with new SP code #7465625 #7465625*638*0000 *638*00000000# 0000# 6-Enjoy G600 unlocked Tested with few pieces
u can unlock g600 and e250 e390 j700 c180 E250V also with just simple typing code #*7337# no need other difficult procedure
the same way have been tested on 2 SGH-M110 and the imei stayed the same. My friend sayed that hi used the same code on a G800 and the imei stayed the same on that one to. If you have more the one lock on the phone like it was on the M110 phones then check what lock is active with *#7465625# and use this codes *7465625*638*Code# *7465625* 638*Code# = Enables Network N etwork lock
#7465625*638*Code# = Disables Network lock *7465625*782*Code# = Enables Subset lock #7465625*782*Code# = Disables Subset lock *7465625*77*Code# = Enables SP lock #7465625*77*Code# = Disables SP lock *7465625*27*Code# = Enables CP lock #7465625*27*Code# = Disables CP lock *7465625*746*Code# = Enables SIM lock #7465625*746*Code# = Disables SIM lock
you should have disabled your SP lock before you disabled your Network Lock. to fix this, in your case, do the following (no "*2767*3855# Full e2p reset" required because you have already done one): 1. *7465625*638*00000000*00000000# - Relock Network lock & reset to 8 zeroes 2. *7465625*77*00000000*00000000# - Relock SP lock & reset to 8 zeroes 3. #7465625*77*00000000# - Disable your SP lock 4. #7465625*638*00000000# - Disable Network lock 5. phone should be ok and unlocked ---------------------------------------------------------------------------------------------------------------------------------Samsung B310
Using HWK Sams, Select Trident B510 and PRESS READ CODES!!! UFxBoot V2.2 (c) SarasSoft 2003., Id: 62 CF 1 10 UFS_USB V2.8 (c) SarasSoft 2007., S/n: 2XXXX HID: AFE3E02E0027009C HWK: A1.04-PRO1 Licence: True Loaded Settings from: Sams.ini 1st: 1st: 20300815A2000A00A2A2A200A2A220 1st Boot Ok, McuId: 00030021, Rom: 00030021, 13-1.2 2nd Boot Ok, McuId: 00030021, Rom: 00030021, 7-2.0 Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre Flash1: Fl_Id: 00010000_227E4200 - Spansion SxxWS256P Baud Rate Set: 460800 bps Unlock Codes: #0111*20577709# #0121*20577709# #0141*45615669# #0151*93511413#
After insert unaccepted simcard and PRESS your code and phone is UNLOCKED!!! 10000000% Solution ---------------------------------------------------------------------------------------------------------------------------------recieve a b130s for unlock but not supported by ust & spt.always error on spt.so i use this code phone is unlock........... 1- Insert Motorola Test Card. 2-Phone ON 3- Personalise unlock code : *7465625*638*00000000*00000000# 4- unlock phone : #7465625*638*00000000# after that phone is unlock. ---------------------------------------------------------------------------------------------------------------------------------+ ---Free unlock A516 Rogers
I have unlocked successfully with Your help. The following method helped me a lot - First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad *2767*3855# (wait 10-15 seconds) phone will reboot(restart) 2) - When phone completes reboot ENTER *7465625*638*8zero*8zero# 3) - NEXT ENTER #7465625*638*8zero# ---------------------------------------------------------------------------------------------------------------------------------+ Unlock Samsung E747 via codes with sim card provider
PROCEDURE; Default Unlock Samsung E747 Solution... Even though NSPRO and UST PRO do not support this model...there is a solution to unlock this phone... you will need the sim card the phone is locked to, and any other company sim card... Follow the following steps might help be for you:
1.insert one working sim card (the phone currently locked to) sim, Enter *7465625*228# *7465625*28638# wait until phone reboot ,wait until you can see the reception bars. 2.turn off and insert one (Non-working sim) ,turn on it ,should show "wrong card" again. enter#7465625*228# 3.turn off the phone, switch (change )to working sim,enter *7465625*77*99999999*99999999# #7465625*77*99999999# 4.off the phone again ,insert non-working sim enter*7465625*638*00000000*00000000# enter#7465625*638*00000000# phone unlocked... ---------------------------------------------------------------------------------------------------------------------------------+ ---Solution Unlock T229 T-mobile working ok 100% by code Insert non T-mobile sim card or motorola tast card You see wrong card User this code *7465625*638*00000000*00000000# Restart phone #7465625*638*00000000# *#7465625# Restart, phone UNLOCK OK. ---------------------------------------------------------------------------------------------------------------------------------+ ---SGH-M140L successfully unlock Via Free Codes
SGH-M140L successfully unlock Via Free Codes 1. insert unaccepted sim card to phone 2. type *2767*3855# (the phone will reboot with full E2P reset) 3. now *7465625*638*00000000*00000000#
4. and #7465625*638*00000000# ---------------------------------------------------------------------------------------------------------------------------------Samsung Unlock Code For T509,T809,A117 & more First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad *2767*3855# (wait 10-15 seconds) phone will reboot(restart) When phone completes reboot ENTER *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive Tried succesfully with A117 t209, x495, x497, c417, t309, t319, t509 US t-mobile, t809 US t-mobile, t609 Us t-mobile, and late models t219 US t-mobile and t329 Us t-mobile. ---------------------------------------------------------------------------------------------------------------------------------+ ---Free Unlock m610
1-Turn on the phone with motorola test card . input to full reset *2767*3855# , phone will reboot and goes to Menu . 3-Customize Sp-lock code *7465625*638*00000000*00000000#4-Unlock your phone with new SP code #7465625*638*00000000#5-Enjoy m610 unlocked ---------------------------------------------------------------------------------------------------------------------------------SAMSUNG F700 Unlock I Did It Myself Yesterday , This is How It Was Done ......Trust me!!!!It worked
First.. Take The Sim Out ... And Put Battery Back On And Turn On Second.. Press The Call Button On The Screen ... Make Sure The Keyboard And Out Its All Touch. Thirdly.. Enter Any Of These Keys When It Restarts Try another Sim That It Was Unlcoked too Use these First *2767*3855# = E2P Full Reset -If Any codes were on Fone would go off ... *2767*2878# = E2P Custom Reset -If Any codes were on Fone would go off ... *#7465625# = Check the locks and I Dont think it was these ones that Didnt work *2767*688# = Unlocking Code *#8999*8378# = All in one Code And Thats FOR Orange (Vodafone Tmobile And 02) ---------------------------------------------------------------------------------------------------------------------------------T509,T809
THIS CODE WILL UNLOCK ALL OF THE NEW MODEL SAMSUNG PHONES EXCEPT SMART PHONES. (X495-AND UP) I TESTED IT OUT LAST NIGHT ON MY T509(PASSED),T809(PASSED) Quote: *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive auto sim lock - inactive --------------------------------------------------------------------------------------------------------------------------------- j706 UNLOCK
This solution is 100% with j706 but first input simcard not accepted after tape *2767*3855# the fone wil reboot temporally unloked after input *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive auUNLOCK t619 tested *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# work in t619 tested ---------------------------------------------------------------------------------------------------------------------------------sgh-t329 unlock I unlocked sgh-t329 using this code.. . *2767*3855# let it reboot(restart) *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... ---------------------------------------------------------------------------------------------------------------------------------unlock code for t809 1. Insert other providers sim 2. *2767*3855# let it reboot(restart) 3. *7465625*638*00000000*00000000# (this changes network lock w/password 00000000) 4. #7465625*638*00000000# (this deactivates network lock w/00000000) 5. *#7465625# to check all locks If all are inactive, then you are to go. ----------------------------------------------------------------------------------------------------------------------------------
Samsung C417 Sucessfully Unlocked By Codes (TESTED BY ME ) Samsung C417 Sucessfully Unlocked By Codes Hi Chennaigsm Mates I wondered About This Model Samsung C417 I try to unlock In Box But Its Not Unlocked it Shows Wrong Card But Its unlock Via Simple Free Codes
Quote: First with different carrier SIM in phone at WRONG CARD screen ENTER on the keypad *2767*3855# (wait 10-15 seconds) phone will reboot(restart) When phone completes reboot ENTER *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# ---------------------------------------------------------------------------------------------------------------------------------+ ---samsung t209 unlock code ok, i found out how to turn the phone locks off. First there is a temporary and a permanent. 1st temp. put this number in the keypad *2767*3855# let it reboot(restart) now its ready for permanent. The code is here in the thread, but i will post anyway. *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive
auto sim lock - inactive It worked on my phone and i am very gratefull to those who are much mor savvy than me. ---------------------------------------------------------------------------------------------------------------------------------+ Free J700 Unlock Code 1- Power on fone ,, type : *#7465625# you will identify wich code is active , which is inactive 2- Remove battery ,, Put your sim card , not all of it ,, just to prepare it to be full inserted , put your battery back and power on fone ,, you must see " insert sim" not "invalid sim.." 3- type : *2767*3855# your fone should restart after 1 min ,, now ,, and before it restart , push your sim card ,,without removing battery 4- your fone should work and accept the sim card ,, but if you check locks you will find that your fone is still Locked 5- now type : *7465685*638*00000000*00000000# your UNLOCK CODE is 00000000 now , hh Enjoy 6- now , back to Locks table with : *#7465625# ,, and for each active code you can disable it ,,,here details : * Disables CP lock : #7465625*27*00000000# * Disables Network lock : #7465625*638*00000000# * Disables SIM lock : #7465625*746*00000000# * Disables SP lock : #7465625*77*00000000# * Disables Subset lock : #7465625*782*00000000# ---------------------------------------------------------------------------------------------------------------------------------D807 Guys!!! :-) Unlock D807 - Its so easy!!! Guys!!! :-) Unlock D807 - Its so easy!!! Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000. e900 Free solution (SIM)unlock E900 Here follows the free solution to (SIM)unlock a Samsung E900, which worked for me. - NSdongle crack + D800 USB datacable (PCB120BBE)
- Select C200 model - Select right COM port (Windows XP -> Devicemanager -> Ports (COM&LPT)) (Not the COM port which you can find under 'Modems') - Press 'UNLOCK' And your Samsung E900 is unlock! (Well, mine was) (Thanks!! to BouRRi GSM, who wrote it somewhere on this forum) Got
new sam unlock *7465625*638*00000000*00000000# NEXT ENTER #7465625*638*00000000# AND THEN *#7465625# to check the locks....all locks are inactive...these are all the locks... network lock - inactive subset lock - inactive sp lock - inactive cp lock - inactive sim lock - inactive activa lock - inactive phone lock - inactive auto network - inactive auto subset lock - inactive auto sp lock - inactive auto cp lock - inactive auto sim lock – inactive panamastercodes *01763*737381# sam1 Power on your phone (Models Z105, Z107V, Z140, Z140V, Z500, Z500V, etc.......) 1- Enter code *7465625*28782# without a sim in the phone 2- Phone will display "Auto Subset Lock: Activated!" 3- Enter code *7465625*28638# without a sim again 3- Phone will display "Auto Network Lock: Activated!" 4- Now insert the sim and enjoy! Phone is Unlocked! (NOTE: When you change sim to other operator repeat this process to unlock it for that operator also) sammasterto sim lock - inactive