Acesorios desbrozadora

– For dealers only – 01-2002

Brushcutters and Trimmers Important Information: Improper use of any brushcutter/trimmer can cause serious or fatal injury. Read, understand and follow all safety instructions in your owner´s manual. To reduce the risk of injury from blade contact, circular saw blades may be used on FS brushcutters that have a bicycle handle and not on FS brushcutters with a "J" handle or loop handle. Other rigid blades may be used on FS brushcutters having a bicycle handle, a "J" handle, or loop handle equipped with a barrier bar. A double shoulder harness should always be used when using a circular saw blade. To reduce the risk of eye injury, always wear proper eye protection. Always use the appropriate deflector for the type of cutting attachment, as explained in your owner´s manual.

Risk of "kickout" with all rigid cutting blades Warning! Kickout is the sudden and uncontrolled motion towards the operator´s right or rear that can occur when the shaded area of the rotating blade comes in contract with a solid object like a tree, rock, bush or wall. The rapid counter-clockwise rotation of the blade may be stopped or slowed, and the cutting attachment may be thrown in an area to the right or to the rear. This kickout may cause loss of control of the brushcutter and may result in serious or fatal injury to the operator or bystander.

STIHL recommends that the circular saw blade be applied to the right of the tree, using the non-shaded area of the blade between the 8 and 11 o'clock positions for cutting. Warning! The risk of kickout is highest when cutting in the darkershaded area between the 12 and 2 o'clock positions. To reduce the risk of kickout and resulting injury, do not use this area of the circular saw blade for cutting trees or shrubs.

Warning! Do not cut any material other than grass, brush and wood. The cutting tools may be used only for the operations described in your manual. Special techniques using the lighter-shaded areas of the blade from the 11 to 12 o'clock positions and the 2 to 5 o'clock positions, to cut shrubs and trees should only be used by experienced operators with specialized training in use and control of the brushcutter.

Warning! To reduce the risk of injury from thrown objects and blade contract, never operate a brushcutter without the appropriate and properly mounted deflector.

Use only STIHL replacement parts for maintenance and repair. Use of parts manufactured by others may cause serious or fatal injury. Never repair damaged cutting attachments by welding, straightening or modifying the shape. This may cause parts of the cutting tool to come off, resulting in serious or fatal injuries. Discard blades that are bent, warped, cracked, broken or damaged in any way. Check condition of cutting tool at regular short intervals. If behavior of tool changes, check it immediately for tightness or

any signs of cracks. Replace damaged or dull cutting tools immediately, even if they have only superficial cracks. If the blade loosens after being properly tightened, the retaining nut may be worn or damaged and should be replaced. If the blade continues to loosen, see your STIHL dealer. Do not attach any blade to a unit without proper installation of all required parts. Never use unauthorized parts to secure the blade. Failure to use the proper parts may cause the blade to fly off and seriously injure the operator or bystanders.

Note: Not all items shown are still available from STIHL, these items are shown for reference purposes only.

Contents

PART 1 Cutting Tools / Applications 1. Mowing heads............................................................................................................................ 2 2. Grass cutting blades .................................................................................................................. 3 3. Brush knife ................................................................................................................................ 3 4. Circular saw blades ................................................................................................................... 3

PART 2 Reference Table Cutting tools - Brushcutter ......................................................................................................... 4-5

PART 3 Cutting Tool Mounting FE 55, FSE 60, FS 36, 40, 72, 75.................................................................................................. 6 FS 44, 55, 55 RT .......................................................................................................................... 7 FS 45, 46 ...................................................................................................................................... 8 FS 50, 51, 52, 56, 62 ..................................................................................................................... 9 FS 61 .......................................................................................................................................... 10 FS 65, 80, 90 ............................................................................................................................... 11 FS 66, 74, 76, 81, 86, 88, 106, 108 ............................................................................................. 13 FS 80, 83, 83 RT, 85, 85 RT, 85 RX, 110, 110 RT, 110 RX,120, 200, 250 ................................. 15 FR 106, 108 ................................................................................................................................. 17 FS 86, 96 ..................................................................................................................................... 19 FS 160, 180, 220, 280, 350, 450 ................................................................................................. 21 FS 360, 420 ................................................................................................................................ 24 FS 550 ......................................................................................................................................... 26

PART 4 Spare Parts and Accessories

q

Polymatic™ 30-2 and Polymatic™ 40-2, TrimCut™ 30-2........................................................... 28 TrimCut™ 40-2 and TrimCut™ 50-2, AUTOCUT® ..................................................................... 29 AUTOCUT® 2-1, AUTOCUT® 10-2 , Mowing Head ................................................................... 30 AUTOCUT® 5-2, Mowing Head, AUTOCUT® C 5-2, Mowing Head ........................................... 31 AUTOCUT® 11-2, Mowing Head, AUTOCUT® 20-2 .................................................................. 32 AUTOCUT® 21-2, AUTOCUT® 24-2 .......................................................................................... 33 AUTOCUT® 25-2, AUTOCUT® 30-2 and AUTOCUT® 40-2 ....................................................... 34 AUTOCUT® 40-4 ........................................................................................................................ 35 SuperCut™ 10-1, SuperCut™ 20-1 ............................................................................................. 36 SuperCut™ 20-2, SuperCut™ 2-1 .............................................................................................. 37 SuperCut™ 2-2, SuperCut™ 40-2 ............................................................................................. 38 PolyCut™ 5-3 and PolyCut™ 6-3, PolyCut™ 10-3 and PolyCut™ 20-3 .................................... 39 PolyCut™ 40-3, Sales designations for Mowing heads and Cultivators, Spare Parts Accessories.............................................................................................................. 40 Sharpening tools ......................................................................................................................... 41 Multi-Polymer Cutting Line (Packaged Coils and Bulk Quantities), Commercial Trimmer Line / Commercial Square Line ............................................................... 42 Transport guard for metal cutting blades .................................................................................... 43 Attachments for STIHL Multi-Cut Professional Series™.............................................................. 44 Gearbox attachments for STIHL Power Tools ............................................................................ 45 Gearbox attachments for STIHL Power Tools ............................................................................ 46 Cutter Bar Assembly and Blades ................................................................................................ 47

1

PART 1 Cutting Tools / Applications

1. Mowing heads

Automatic nylon line head; no need for manual adjustment of line length 681KT120 AM

- Trimming around trees, between shrubs, along edges, walls and fences

SuperCut

TM

681KT121 AM

Semi-automatic nylon line head; "bump" line feed

AUTOCUT

®

681KT132 AM

Manual nylon line head

The following trademarks are owned by Andreas STIHL AG & Co., Waiblingen: Effective December 2001

4-MIXTM BioPlusTM EasySpoolTM ElastoStartTM EmaticTM/Stihl-E-MaticTM HT PlusTM IntelliCarbTM Master Control LeverTM MicroTM PolymaticTM Pro MarkTM Quad PowerTM Quiet LineTM STIHL ArcticTM STIHL CompactTM Stihl GripTM STIHL HomeScaper SericesTM 34. STIHL Interchangeable Attachment SeriesTM 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33.

2

35. STIHL MagnumTM/ STIHL-MagnumTM 36. STIHL MiniBossTM 37. STIHL MotoPlus 4TM 38. STIHL Multi-Cut HomeScaper SeriesTM 39. STIHL Multi-Cut Professional SeriesTM 40. Stihl OutfittersTM 41. STIHL PolyCutTM 42. STIHL PowerSweepTM 43. STIHL Precision SeriesTM 44. STIHL Professional SeriesTM 45. STIHL ProtechTM 46. STIHL SuperCutTM 47. STIHL TerritoryTM 48. TapActionTM 49. TrimCutTM Any unauthorized use of these trademarks without the express written consent of Andreas STIHL AG & Co. Waiblingen is strictly prohibited.

TrimCut

TM

681KT123 AM

Common Law Trademarks 16.

STIHL Farm Boss® STIHL Quickstop® STIHL PICCO® STIHL RAPID® STIHL TOPIC® STIHL TIMBERSPORTS® 15. STIHL WOOD BOSS® 9. 10. 11. 12. 13. 14.

Higher cutting capacity; can be equipped with nylon line. Thermoplastic blades specifically for undergrowth

PolyCut

TM

Manual nylon head; uses pre-cut lengths of line

681KT124 AM

Registered Trademarks 1. q 2. ( 3. AUTOCUT® 4. EASYSTART® 5. OILOMATIC® 6. STIHL Cutquik® 7. STHL DUROMATIC® 8. STIHL ROLLOMATIC®

Fixed line head

PART 1 Cutting Tools / Applications

2. Grass cutting blades

High cutting capacitiy in sparse and dense but regular growth, also for growth with low cutting resistance 681KT125 AM

- Weeds

4-tooth grass cutting blade

- Fern - Stinging nettles - Reed - Brushwood 681KT126 AM

High cutting capacity in dense and varied growth; robust; also for thick stalks

8-tooth grass cutting blade

3. Brush knife

For heavy weed cutting

681KT127 AM

- Thicket, e.g. bramble hedges - Scrub

Brush knife

4. Circular saw blades

Smooth, soft cut, very easy to resharpen

681KT128 AM

- Wood - Brushwood - Woody scrub

Chisel-tooth circular saw blade

- Wood - Thicket - Woody scrub - Bushes - Hedges - Brushwood

681KT129 AM

Outstanding cutting capacity

Scratcher-tooth circular saw blade

3

681KT130 AM

4006 710 2103

l

l

AUTOCUT C 5 - 2 4006 710 2106

l

l

AUTOCUT 11 - 2

4004 710 2192

l

l

l

FS 72, 75

FS 76, 83 R, 85 R, 110 R

AUTOCUT 5 - 2

FS 76, 83, 85, 110

4003 710 2142

l

FS 74 R, 80 R T

SuperCut 40 - 2

l

FS 74, 80 T

4002 710 2184

FS 55 R, 55 RT

l

SuperCut 20 - 2

FS 55

FS 44 R

l

FS 45, 46

FS 44

FS 40

FS 36

FSE 60

(l)Approved only for loop handle with barrier bar and deflector 4119 713 4500 Q Thread M12, M14 R Thread M12 S Thread M14 T From 1996 on U Changed from 200 - 24 to 200 - 22 * must be used with limit stop and double shoulder harness

FE 55

PART 2 Reference Table

l

l

l

l

l

AUTOCUT 21 - 2 4002 710 2192

l

l

l

l

l

l

l

l

AUTOCUT 25 - 2 4002 710 2191

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

AUTOCUT 30 - 2 4002 710 2187 681KT131 AM

AUTOCUT 40 - 2 4003 710 2189

681KT133 AM

681KT132 AM

AUTOCUT 40 - 4 4005 710 2102 TrimCut 30 - 2

4002 710 2193

TrimCut 40 - 2

4003 710 2193

TrimCut 50 - 2 Q

4005 710 2193

Fixed line head

4001 713 2100

PolyCut 5 - 3

4004 710 2180

PolyCut 6 - 3

4006 710 2104

PolyCut 20 - 3

4002 710 2189

PolyCut 40 - 3

4111 710 2190

Ø 230 - 4

20 mm

4000 713 3801

Ø 230 - 4

25.4 mm

Ø 230 - 8

l

l

l l l

l

l

l

l

l

l

4001 713 3801

l

( l)

l

(l)

l

(l )

l

(l)

25.4 mm

4001 713 3803

l

( l)

l

(l)

l

(l )

l

(l)

Ø 255 - 8

20 mm

4000 713 3802

Ø 250 - 3

25.4 mm

4112 713 4100

l

(l )

l

(l)

Ø 300 - 3

20 mm

4119 713 4100

Brush knife

Ø 350 - 3

20 mm

4110 713 4100

*

Ø 200 - 44

20 mm

4000 713 4200

Ø 200 - 80

25.4 mm

4112 713 4201

Ø 225 - 48

20 mm

4000 713 4205

Ø 250 - 50

20 mm

4104 713 4200

Ø 200 - 22

20 mm

U 4119 713 4200

Ø 200 - 24

25.4 mm

4112 713 4203

Ø 225 - 24

20 mm

4110 713 4204

681KT135 AM

681KT163 AM

l

681KT137 AM

681KT136 AM

Grass cutting blade

* Chisel-tooth circular saw blade

4

681KT138 AM

Scratcher-tooth circular saw blade

l

l

l

l

l

l l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l l

l

l

l l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l

l l

l

l

l

l l

l

l l

l

l

l

l

l

FR 106, 108

FS 120 R, 200 R, 250 R

l

FS 550

FS 120, 200, 250

l

FS 450

FS 106 R, 108 R

l

FS 360, 420

FS 106, 108

l

FS 350

FS 86 R, 88 R

l

FS 280

FS 86, 88

l

FS 220

FS 85 RX, 110 RX

l

FS 160, 180

FS 83 RT, 85 RT, 110 RT

PART 2 Reference Table

l

l

l

l

l

lR

l

lS

l l

l

l

l

l

l

l

l

l

l

l

l

l

l

(l)

l

(l)

l

(l)

l

( l)

l

(l)

l

(l)

l

(l)

l

( l)

l l

(l)

l

(l)

l

(l)

l

l

l

l

l

l

( l)

l l

l

l

l

l l

l l

l

l

l

l

l l

l

l l

l

l

l

l

l l l

l

l

l

l

l

l l

l

l

l l

l

l

l

l

l

5

PART 3 Cutting Tool Mounting

FE 55, FSE 60, FS 36, 40, 72, 75

FE 55, FS 36, 40, 72, 75 4130 713 4501

QT(4130 710 8100) (C) Q 4130 713 4100

QR4130 713 1501

S 4004 710 2188

ST4004 710 2189

4004 710 2180 PolyCut 5 - 3

PolyCut 10 - 3

SuperCut 10 - 1

9210 260 1400 ( 9211 260 1400) Q R S T

4004 710 2192 AUTOCUT 11 - 2 T 4004 710 2100 AUTOCUT 10 - 2

681KT001 AM

S 4130 713 1501

For FS 36, 40, 72, 75 For FE 55 Approved for FS 40, 72, 75 only No longer available

FSE 60

Q 4809 710 8100

QR4130 713 4100

Q 4006 710 2106

Q 4006 710 2103

AUTOCUT 5 - 2 681KT143 AM

AUTOCUT C 5 - 2

Q For FSE 60 R Part included in deflector 4809 710 8100

6


FS 44, 55, 55 RT

R 4119 713 4500

Q 4133 710 8101

R 4119 710 6000

T Q 4133 713 4110

T R 4119 716 3200 4112 713 8500 4001 713 2100

S 4001 713 2102

U 4126 713 1600

Fixed line head

U 4130 713 1600

4002 710 2193 TrimCut 30 - 2

4002 710 2192 4002 710 2184 SuperCut 20 - 2 AUTOCUT 21 - 2 S 4002 710 2185 S 4002 710 2106 SuperCut 20 - 1 AUTOCUT 20 - 2

S 4002 710 2120

4002 710 2189 PolyCut 20 - 3

Polymatic 30 - 2

T 4130 713 1600

T 4126 713 1600 4126 642 7600

Q Part included in deflector kit 4133 007 1002 R Part included in deflector kit 4119 007 1013 S No longer available

681KT004 AM

4002 710 2191 AUTOCUT 25 - 2

T

Q 4119 713 4500

T

RS4001 713 3803

RS4001 713 3801

Grass cutting blade 230 - 8


T 4126 713 1600

T 4130 713 1600

4126 713 3100

681KT118 AM

4126 642 7600

Q Part included in deflector kit 4119 007 1013 R Not approved for loop handle units without barrier bar

S Transport guard mandatory for metal cutting tools

T

7


FS 45, 46

4140 710 8100

S 4130 713 4100

4140 713 1501

Q 0000 955 0904 R 4006 713 6800 Q For previous version R For new version S Part included in deflector 4140 710 8100

8

4006 710 2103 AUTOCUT 5 - 2

4006 710 2106 AUTOCUT C 5 - 2 681KT144 AM

4006 710 2104 PolyCut 6 - 3


FS 50, 51, 52, 56, 62

4125 713 4100 4125 710 8120

4112 713 8500

Q

4112 713 1601

R 4002 710 2185

SuperCut 20 - 1

4002 710 2189 PolyCut 20 - 3

4002 710 2193 TrimCut 30 - 2

R 9302 929 4370

681KT106 AM

Q 4125 713 6600 Q 4125 713 6605

4125 713 6600

Q Required for FS 50, 51 only R No longer available

For use only on FS 62 with bicycle handle

4118 713 4500

QR4001 713 3801

QR4001 713 3803



4126 713 1600

4126 642 7600

681KT107 AM

4126 713 3100

Q Not approved for FS 50, 51, 52, 56 and FS 62 R (loop handle) R Transport guard mandatory for metal cutting tools

9


FS 61

4114 710 8100

4112 713 8500 4112 713 1600

Q 4002 710 2120

Polymatic 30 - 2

4002 710 2193 TrimCut 30 - 2

4002 710 2189 PolyCut 20 - 3 9302 929 4370

681KT108 AM

4125 713 6600 4125 713 6605

Q No longer available

4114 710 8101

QR4001 713 3801


QR4001 713 3803


4111 710 2190 PolyCut 40 - 3

4112 713 1601

4112 641 2600 4112 641 3500

Q Not approved for units with loop handles R Transport guard mandatory for metal cutting tools

10

681KT109 AM

4112 713 3103


FS 65, 80 (old), 90

QU4114 710 8102 R 4112 710 8101

4112 713 8500 4112 713 1601 4125 713 6600 4125 713 6605

T 4111 710 2190 PolyCut 40 - 3

Polymatic 30 - 2

S 4002 710 2189 PolyCut 20 - 3

4002 710 2193 TrimCut 30 - 2

4112 641 2600

9302 929 4370

Q R S T

4112 713 1601

4112 641 3500

681KT036 AM

U 4002 710 2120

U No longer available

For FS 65 For FS 80, 90 Approved for or FS 65 only Approved for or FS 80, 90 only

QT4114 710 8102 R 4112 710 8101

S 4001 713 3801

S 4001 713 3803



S 4112 713 4100

Brush knife 250 - 3

4112 713 1601

4112 641 2600 4112 641 3500 Q R S T

FS 65 FS 80, 90 Not approved for units with loop handle No longer available

U

681KT110 AM

4112 713 3103

U Transport guard mandatory for metal cutting tools

11


FS 65, 80 (old), 90

4112 710 8200 (FS 80)

ST4117 710 8200 (FS 65, 80, 90)

R 4112 713 4203

R 4112 713 4201

Chisel-tooth circular saw blade 200 - 24

Scratcher-tooth circular saw blade 200 - 80

4112 713 1601

4112 641 3500

Q Transport guard mandatory for metal cutting tools R Not approved for units with loop handle

681KT111 AM

4112 641 2600

Q

S Available as stop kit 4126 004 1002 with transport guard T No longer available

681KT112 AM

No longer available QR4600 710 1500 Cultivator BC 30

Q For FS 80 from serial number X 5 168 100 and FS 90 R For parts see parts list 0452 381 1323

12


FS 66, 74, 76, 81, 86, 88, 106, 108 R 4119 713 4500 S 4133 710 8101

R 4119 710 6000

S 4133 713 4110

W W

4112 713 8500

R 4119 716 3200

W 4126 713 1600

V 4002 710 2184

W 4130 713 1600

TV4002 710 2142

V 4002 710 2191

SuperCut 20 - 2

SuperCut 2 - 2

AUTOCUT 25 - 2

VX4002 710 2187

AUTOCUT 30 - 2

PolyCut 20 - 3

Q R S T

T 4002 710 2120

UV4002 710 2192

Polymatic 30 - 2

Approved for FS 66, 74, 76 and 81 only Part included in deflector kit 4119 007 1013 Part included in deflector kit 4133 007 1002 No longer available

4002 710 2193 TrimCut 30 - 2

AUTOCUT 21 - 2 UV4002 710 2106 T AUTOCUT 20 - 2

U Approved for FS 66, 74 and 76 only V Not approved for 4117 713 4500 deflector use X Not approved for FS 66, 74, 76

W

R 4119 713 4500

S 4133 710 8101

V

U

W

4117 710 2900

Q 4117 713 4500

W

S 4133 713 4110

RU4119 710 6000

W

R 4119 716 3200

TV4111 710 2190

U 4001 713 2100

PolyCut 40 - 3

Fixed line head

W 4130 713 1600 681KT113 AM

W 4126 713 1600

4126 642 7600

Q R U S

681KT038 AM

Q 4002 710 2189

No longer available Part included in deflector kit 4119 007 1013 For Fixed Line head Part included in deflector kit 4133 007 1002

T Approved for FS 86, 88, 106 and 108 V For PolyCut 40-3

W

13


FS 66, 74, 76, 81, 86*, 88, 106, 108

S 4119 713 4500

T 4117 713 4500

(4119 710 8100)

U

U QR4112 713 4100 Brush knife 250 - 3

QR4001 713 3801

QR4001 713 3803


QR4112 713 4100


Brush knife 250 - 3

U 4130 713 1600

U 4126 713 1600

681KT114 AM

4126 713 3100 4126 642 7600 R Not approved for loop handle units without barrier bar S Part included in deflector kit 4119 007 1013 T No longer available

* From serial number X 14 821 681 Q Transport guard mandatory for metal cutting tools

U

S4117 710 8200 X

R 4112 713 4203

R 4112 713 4201



X 4126 713 1600

No longer available TV4600 710 1510 Cultivator BC 20 UV4600 710 1500 Cultivator BC 30

X 4130 713 1600

Q Q Transport guard mandatory for metal cutting tools R Not approved for all units with loop handle

14

681KT115 AM

4126 713 3100 4126 642 7600 S Available as stop kit 4126 007 1002 with transport guard T For FS 66 U For FS 76, 81, 86, 88, 106, 108

V For parts see parts list X 0452 381 1323

PART 3 FS 80 (a), 83 (b), 83 RT (b), 85, 85 RT, 85 RX, 110 (c), 110 RT (c), 110 RX (c), 120, 200, 250 Cutting Tool Mounting (a) From 1996 on

(b) Available in limited areas

(c) Not available until early 2003

Q 4119 713 4500 R 4133 710 8101

Q 4119 710 6000

R 4133 713 4110

V V

4112 713 8500

Q 4119 716 3200

V 4126 713 1600

4002 710 2184 SuperCut 20 - 2

V 4130 713 1600

S 4002 710 2142

4002 710 2191 AUTOCUT 25 - 2

SuperCut 2 - 2

U 4002 710 2187

Q R S T

S 4002 710 2120

T 4002 710 2192

Polymatic 30 - 2

Part included in deflector kit 4119 007 1013 Part included in deflector kit 4133 007 1002 No longer available Approved for FS 80, 83, 85 and 110 only

4002 710 2193 TrimCut 30 - 2

AUTOCUT 21 - 2 T 4002 710 2106 S AUTOCUT 20 - 2

U Not approved for FS 80, 83, 85 and 110

681KT038 AM

AUTOCUT 30 - 2

4002 710 2189 PolyCut 20 - 3

V

Q 4119 713 4500

R 4133 710 8101

S

S R 4133 713 4110

Q 4119 710 6000 Q 4119 716 3200

4001 713 2100 Fixed line head

4126 642 7600

Q Part included in deflector kit 4119 007 1013 R Part included in deflector kit 4133 007 1002

S 4130 713 1600 681KT159 AM

S 4126 713 1600

S

15

PART 3 Cutting Tool Mounting FS 80 (a), 83 (b), 83 RT (b), 85, 85 RT, 85 RX, 110 (c), 110 RT (c), 110 RX (c), 120, 200, 250 (a) From 1996 on

(b) Available in limited areas

(c) Not available until early 2003 2002

S 4119 713 4500

(4119 710 8100)

V

QRU 4001 713 3801

QRU 4001 713 3803


QRU 4112 713 4100


V 4126 713 1600

Brush knife 250 - 3

V 4130 713 1600

681KT078 AM

4126 713 3100 4126 642 7600 Q Transport guard mandatory for metal cutting tools R Not approved for loop handle units without barrier bar

S Part included in deflector kit 4119 007 1013 T No longer available U Not approved for FS 85 RX and FS 110 RX

V

S 4117 710 8200 W

R 4112 713 4203

R 4112 713 4201



W 4126 713 1600

TUV 4600 710 1502

Cultivator BC 35

W 4130 713 1600

Q Q Transport guard mandatory for metal cutting tools R Not approved for all units with loop handle

16

681KT115 AM

4126 713 3100 4126 642 7600 S Available as stop kit 4126 007 1002 with transport guard T For parts see parts list 0452 381 1323 U For FS 83, 85, 110, 120, 200, 250

V Not approved for FS 85 RX W and FS 110 RX


FR 106, 108 Q 4119 713 4500

R 4133 710 8101

U U

R 4133 713 4110

Q 4119 710 6000

Q 4119 716 3200

4112 713 8500 (B)

U 4126 713 1600

ST4002 710 2142

SuperCut 2 - 2

U 4130 713 1600

T 4002 710 2107

AUTOCUT 30 - 2

Polymatic 30 - 2

Q R S T

T 4002 710 2184

4002 710 2193 TrimCut 30 - 2

Part included in deflector kit 4119 007 1013 Part included in deflector kit 4113 007 1002 No longer available Not approved for 4117 713 4500 deflector use

AUTOCUT 25 - 2

U

Q 4119 713 4500

R 4133 710 8101

U

R 4133 713 4110

T 4002 710 2191

SuperCut 20 - 2

T V

V

QU4119 710 6000

Q 4119 716 3200

ST4111 710 2190

U 4001 713 2100

PolyCut 40 - 3

Fixed line head

V 4130 713 1600 681KT117 AM

V 4126 713 1600

4126 642 7600

Q R S T

Part included in deflector kit 4119 007 1013 Part included in deflector kit 4113 007 1002 Approved for FR 106 and 108 For PolyCut 40-3

681KT116 AM

S 4002 710 2120

U For Fixed line head

V

17


FR 106, 108

R 4119 713 4500 S (4119 710 8100)

T

4001 713 3801 Grass cutting blade 230 - 4

T 4112 713 4100

4001 713 3803 Grass cutting blade 230 - 8

Brush knife 250 - 3

T 4130 713 1600

T 4126 713 1600

Q Q Transport guard mandatory for metal cutting tools R Part included in deflector kit 4119 007 1013 S No longer available

681KT078 AM

4126 713 3100 4126 642 7600

T

R 4117 710 8200

T

Q 4112 713 4203

Q 4112 713 4201



T 4130 713 1600

T 4126 713 1600

S Q Not approved for units with loop handle. Approved for FR 106 and 108 only for limbing standing timber

18

681KT077 AM

4126 713 3100 4126 642 7600

R Available as stop kit 4126 007 1002 with transport guard S Transport guard mandatory for metal cutting tools

T


FS 86*, 96

S 4119 713 4500

R 4133 710 8101

S 4119 710 6000

R 4133 713 4110

S 4119 716 3200

4112 713 8500

4125 713 6600

4125 713 6605

4117 713 1600

Q 4002 710 2120

Polymatic 30 - 2

* Q R S

Q 4002 710 2193 T 4002 710 2184 T 4002 710 2142 T 4002 710 2191 TrimCut 30 - 2

Up to serial number X 14 821 680 No longer available Part included in deflector kit 4133 007 1002 Part included in deflector kit 4119 007 1013

SuperCut 20 - 2

SuperCut 2 - 2

AUTOCUT 30 - 2

S 4119 713 4500 Q (4119 710 8100)

T Q 4117 713 4500

T 4002 710 2187

T Not approved for 4117 713 4500 deflector use

R 4133 710 8101

4117 710 2900

AUTOCUT 25 - 2

681KT079 AM

4125 713 6600

R 4133 713 4110

U

S 4119 716 3200 RT4119 710 6000

4111 710 2190 PolyCut 40 - 3

4001 713 2100 Fixed line head

4112 641 2600 4112 641 3500

Q R S T

No longer available Part included in deflector kit 4133 007 1002 Part included in deflector kit 4119 007 1013 For Fixed Line head

681KT080 AM

4117 713 1600

U For PolyCut 40-3

19


FS 86*, 96

4119 713 4500

Q 4117 713 4500

Q (4119 710 8100)

RT4001 713 3803

RT4001 713 3801



RT4112 713 4100 Brush knife 250 - 3

4117 713 1600 4112 713 3103 681KT081 AM

4112 641 2600 4112 641 3500 * Up to serial number X 14 821 680 Q No longer available R Transport guard mandatory for metal cutting tools

S Part included in deflector kit 4119 007 1013 T Not approved for loop handle units without barrier bar

S 4117 710 8200

R 4112 713 4201


R 4112 713 4203


No longer available

T 4600 710 1500

Cultivator BC 30

4117 713 1600

4112 641 2600 4112 641 3500

* Up to serial number X 14 821 680 Q Transport guard mandatory for metal cutting tools R Not approved for untis with loop handle

20

S Available as stop kit 4126 007 1002 with transport guard T For parts see parts list 0452 381 1323

681KT082 AM

4112 713 3103

FS 160, 180, 220, 280, 350, 450

PART 3 Cutting Tool Mounting 681KT095 AM

4119

Q 4119 713 4500

Q 4119 713 4500

R 4133 710 8101 Q 4119 710 6000

R 4133 713 4110 Q 4119 716 3200

Q 4119 716 3200 ST4119 717 2806

ST4119 717 2806

T 4119 717 3100

T 4119 717 3100

4116 710 3800

4116 710 3800

S 4119 717 2800

S 4119 717 2800

4116 713 1600

4111 710 2190 PolyCut 40 - 3

4119 642 7600

V 4003 710 2100

4003 710 2193 Polymatic 40 - 2 TrimCut 40 - 2

Q Available as deflector kit 4119 007 1013 with skirt and blade R Part included in deflector kit 4133 007 1002 S Available as deflector kit 4119 007 1021

4003 710 2142 SuperCut 40 - 2

4003 710 2189 U 4005 710 2102 AUTOCUT 40 - 2 AUTOCUT 40 - 4

681KT083 AM

4116 713 1600

T Only for gearhead with screw-fitted guard ring U For FS 280, 280 K, 450, 450 K only V No longer available

S 4000 713 3301 (S 4000 713 3300)

4119 713 4500

R 4117 710 8200

QT4119 717 2806 T 4119 717 3100 4116 710 3800

Q 4119 717 2800 V 4119 713 4100 Brush knife 300 - 3

T 4119 717 2807

V 4119 713 4200

Chisel-tooth circular saw blade 200 - 22 (200 - 24)

V 4000 713 3801

T 4119 717 3100 4116 710 3800

V 4110 713 4204



UV4000 713 4205


V 4000 713 4200

4119 642 7600 Q Available as deflector kit 4119 007 1021 R Available as stop kit 4119 007 1008 with transport guard

4116 713 1600 4116 713 3100 4119 642 7600

S Available as stop kit 4119 007 1009 with transport guard T Only for gearhead with screw-fitted guard ring U For FS 160, 180, 220, 280, 450 only

681KT084 AM

4116 713 1600 4119 713 3100

Scratcher-tooth circular saw blade 200 - 44 V 4000 713 3802 Grass cutting blade 255 - 8

V Transport guard mandatory for metal cutting tools

21


FS 160, 180, 220, 280, 350, 450 681KT096 AM

4128

Q 4119 713 4500

Q 4119 713 4500

(4119 710 8100)

R 4133 710 8101 R 4133 713 4110

Q 4119 716 3200 4128 717 2701

4128 717 2701

4128 710 3800

4128 710 3800

4119 717 2800

4119 717 2800

Q 4119 710 6000 Q 4119 716 3200

4111 710 2190 PolyCut 40 - 3

4003 710 2193 TrimCut 40 - 2

4119 642 7600

4003 710 2142 SuperCut 40 - 2

681KT085 AM

4128 713 1600 4003 710 21895 S 4005 710 2102 AUTOCUT 40 - 2 AUTOCUT 40 - 4

Q Available as deflector kit 4119 007 1013 with skirt and blade R Part included in deflector kit 4133 007 1002 S For FS 280, 450 only

R 4000 713 3301 (R 4000 713 3300)

4119 713 4500 (4119 710 8100)

Q 4117 710 8200

4128 710 3800 4119 717 2800

T 4119 713 4100

T 4119 713 4200

4128 717 2706

Chisel-tooth circular saw blade 200 - 22 (200 - 24)

T 4000 713 3801

4128 710 3800

ST4110 713 4204



Brush knife 300 - 3

T 4000 713 4200

ST4000 713 4205



4128 713 1600 4119 713 3100 4119 642 7600 Q Available as stop kit 4119 007 1008 with transport guard R Available as stop kit 4119 007 1009 with transport guard

22

T 4000 713 3802 Grass cutting blade 255 - 8

4128 713 1600 4116 713 3100 4119 642 7600

S For FS 160, 180, 220, 280, 450 only T Transport guard mandatory for metal cutting tools

681KT090 AM

4128 717 2701


FS 160, 180, 220, 280, 350, 450

No longer available

RS4600 710 1501 BC 40

681FK082 AM

No longer available QS4600 710 1500 BC 30

Q For FS 160 (up to serial number X 50 609 047), 180 R For FS 160 (from serial number X 50 609 048), 220, 220 K, 280, 280 K, 300, 350, 450 S For parts see parts list 0452 381 1323

23


FS 360, 420

4116 713 4501

4116 713 4501

RS4116 710 8101

RS4116 710 8101

R 4119 716 3200

R 4119 716 3200 Q

4110 710 7001

Q

Q

4116 710 3800 60 mm dia.

4116 710 3810 65 mm dia.

R 4119 710 6000

4116 710 3810 65 mm dia.

S 4116 007 1007

4111 710 2190 PolyCut 40 - 3

4119 642 7600 (M12) 4116 642 7601 (M14)

T 4003 710 21003 (M14) Polymatic 40 - 2

Q Thread M12 or M14 R Deflector kit 4116 710 8101 comes complete with mounting hardware.

4005 710 2102

4005 710 2193 (M14) TrimCut 50 - 2

AUTOCUT 40 - 4

S Available as deflector 4116 007 1014 with skirt, blade and deflector 4116 007 1007 T No longer available

4116 713 4501 RS4116 710 8101

Q

4110 710 7001

4116 710 3810 65 mm dia. 4116 710 3800 60 mm dia.

Q 4116 710 3800 60 mm dia.

S 4116 007 1007

T 4110 713 4100 Brush knife 350 - 3


4116 713 1600 60 mm dia. 4116 713 1601 70 mm dia.

4119 717 3100

4119 642 7600 (M12) 4116 642 7601 (M14) Q Thread M12 or M14 R Deflector kit 4116 710 8101 comes complete with mounting hardware.

S Available as deflector 4116 007 1014 with deflector 4116 007 1007 and rider plate T Transport guard mandatory for metal cutting tools

681KT160 AM

4116 713 1600 60 mm dia. 4116 717 2700

24

T 4003 710 2120 (M12)

681KT091 AM

4116 713 1600 60 mm dia.


FS 360, 420

R 4116 710 8202 (R 4116 710 8201)

S 4116 710 8207 (S 4116 710 8206) Q

Q

T 4110 713 4204 Chisel-tooth circular saw blade 225 - 24

T 4000 713 4205

T 4104 713 4200



4119 642 7600 (M12) 4116 642 7601 (M14) Q Thread M12 or M14 R Available as stop kit 4116 007 1019 with transport guard

4116 713 1600 60 mm dia. 4116 717 2700

681KT161 AM

SR4116 713 3100

S Available as stop kit 4116 007 1018 with transport guard T Transport guard mandatory for metal cutting tools

25


FS 550 Ø 35,5 mm

4116 713 4501

RS4116 710 8101

4116 713 4501

RS4116 710 8101

!

4119 710 6000

4119 716 3200

Q

Q

4119 716 3200

4116 710 3800 60 mm dia.

4116 710 3810 65 mm dia.

4116 710 3810 65 mm dia.

S 4116 007 1007

4116 713 1600 60 mm dia.

4005 710 2193 (M14) TrimCut 50 - 2


4005 710 2102

T 4003 710 2120 (M12) AUTOCUT 40 - 4

681KT098 AM

4111 710 2190 PolyCut 40 - 3

S Available as deflector 4116 007 1014 with skirt, blade and deflector 4116 007 1007 T No longer available

4116 713 4502

4116 713 4502

Ø 37,5 mm

Q 4116 710 8102

Q 4116 710 8102

!

4119 710 6000

4119 716 3200 4119 716 3200

4116 710 3800 60 mm dia.

4116 710 3810 65 mm dia.

4116 710 3810 65 mm dia.

4116 007 1007

4116 713 1600 60 mm dia. 4116 642 7601

Q Deflector kit 4116 710 8102 comes complete with mounting hardware

26

4005 710 2193 TrimCut 50 - 2

4005 710 2100 AUTOCUT 40 - 4

681KT099 AM

4111 710 2190 PolyCut 40 - 3


FS 550 Ø 35,5 mm

Ø 37,5 mm

4116 713 4501 RU4116 710 8101

!

!

4116 713 4502

S 4116 710 8102 Q 4116 710 3800 60 mm dia.

4116 710 3810 65 mm dia. 4116 710 3800 60 mm dia.

4116 007 1007

T 4110 713 4100 Brush knife 350 - 3


4116 713 1600 60 mm dia. 4116 713 1601 70 mm dia. 4116 717 2700

681KT100 AM

4116 713 1600 60 mm dia. 4119 717 3100


S Deflector kit 4116 710 8102 comes complete with mounting hardware. T Transport guard mandatory for metal cutting tools

U Available as deflector 4116 007 1014 with skirt, blade and deflector 4116 007 1007

R 4116 710 8207 (R 4116 710 8206)

Q 4116 710 8202 (Q 4116 710 8201)

S 4110 713 4204 Chisel-tooth circular saw blade 225 - 24

S 4104 713 4200


S 4000 713 4205

Scratcher-tooth circular saw blade 225 - 48 4116 713 1600 60 mm dia. 4116 717 2700 4119 642 7600 (M12) 4116 642 7601 (M14)

Q Available as stop kit 4116 007 1019 with transport guard R Available as stop kit 4116 007 1018 with transport guard

681KT227 AM

QR4116 713 3100

S Transport guard mandatory for metal cutting tools

27

PART 4 Spare Parts and Accessories Polymatic™ 30-2 and Polymatic™ 40-2 Ind. Part Number No.

8 1, 9

4002 710 2120

1

4126 713 6500 4110 713 3600 4110 713 8300 4110 713 3000

1 1 2 1 1

0000 930 2587

1

6 0000 997 2300 7 4110 713 6801 8 4112 713 8500

1 1 1

4003 710 2100

1

9 4003 713 6500

1

1 2 3 4 5

3 2 3

Quan- Part Name tity

4 5

“Polymatic 30-2” mowing head ) 1 -8 Shaft bolt 10 mm Spool housing Eyelet spool w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50ft) (A, B; see page 42) Helical spring Knob (l/h thread) Washer

“Polymatic 40-2” mowing head ) 2 - 7 and 9 Shaft bolt 12 mm

6 7 No longer available

TrimCut™ 30-2 Ind. Part Number No.

3

1

4

6

6

5

28

681KT086 AM

7

8

4002 710 2193

1

4002 710 3600 0000 967 3706 4002 713 8302 4002 713 6502 4002 713 3001

1 1 2 1 1 2

0000 930 2587 0000 930 2530

1 1

7 0000 997 3800 8 4002 740 6700

1 1

1 2 3 4 5 6

2

3


“TrimCut 30-2” mowing head )1-8 Spool housing ) 2, 3 Warning plate Eyelet Collar screw M10x1.5 l/h thread Spool insert w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (0.095 in dia.) Reel nylon line 15 m (50 ft) Reel “quiet“ nylon line 15 m (50 ft) (A, B; see page 42) Spring Star nut l/h thread

PART 4 Spare Parts and Accessories TrimCut™ 40-2 and TrimCut™ 50-2 9 1

Ind. Part Number No.

3

4003 710 2193

1

4002 710 3600 0000 967 3706 4002 713 8302 4003 713 6501 4002 713 3001

1 1 2 1 1 2

0000 930 2587 0000 930 2511

1 1

7 0000 997 3800 8 4002 740 6700 9 4111 716 9300

1 1 1

4005 710 2193

1

10 4005 713 6500

1

1 2 3 4 5 6

2

3 4, 10

6 6

5


“TrimCut 40-2” mowing head )1-9 Spool housing ) 2, 3 Warning plate Eyelet Collar screw M12x1.5 l/h thread Spool insert w/o line Nylon line 3.5 m (12ft) 2.7 mm dia. (0.105 in dia.) Reel nylon line 10.7 (35 ft) Reel “quiet“ nylon line 10.7 m (35 ft) (A, B; see page 42) Spring Star nut l/h thread Ring

7

8 No longer available

“TrimCut 50-2” mowing head ) 1, 5 - 10 Collar screw M14x1.5 l/h thread

AUTOCUT® Ind. Part Number No.

No longer available

4002 710 2100

1

4118 713 3601 7118 713 8300 0000 997 2800 4118 713 8310 4125 713 9300 4118 710 4300

1 1 1 1 1 1

7 4118 713 6301 8 4118 713 6900 9

1 1 1

0000 930 2588

1

1 1 2 3 4 5 6

3 4

5 6 9

“AUTOCUT” mowing head (C) )1-9 Spool housing (C) Eyelet Helical spring Spring adapter Feeder element Spool with nylon line ,9 Thrust cap Clamp ring (C) Nylon line 10 m (33ft) 2.0 mm dia. (.080 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42)

7

8

681KT102 AM

2


29

PART 4 Spare Parts and Accessories AUTOCUT® 2-1 Ind. Part Number No.

9

2 1 2 3 4

10


4002 710 2150

1

1 2 3 4 5

4002 713 3606 4110 713 8300 4002 713 6803 4002 997 2500 4002 710 4382

1 1 1 1 1

6 7 8 9 10

4002 713 3006 4002 713 6300 4002 713 2000 4126 713 6500

1 1 1 1 1

0000 930 2588

1

5, 6

“AUTOCUT 2-1” mowing head (C) ) 1 - 10 Spool housing Eyelet Nut (C) Helical spring Spool with nylon line ) 6 and 10 Spool w/o line Button Cover Shaft bolt 10 mm Nylon line 10 m (33 ft) 2.0 mm dia. (.080 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42)

7


AUTOCUT® 10-2, Mowing Head Ind. Part Number No.

No longer available

2

1

2 3 4, 5

4004 710 2100

1

1 4004 710 3601

1

2 4004 713 8300 3 0000 997 2100 4 4004 710 4300

2 1 1

4 4004 710 4304 5 4004 713 3000 6

1 1 1

0000 930 2584 0000 930 2588

1 1

6 6 7


1 0000 930 2587

1

7 9465 620 2771 8 9210 260 1400 9 4004 710 4000

1 1 1

8

9

30

“AUTOCUT 10-2” mowing head (C) )1-9 Spool housing ,2 Eyelet Helical spring Spool with nylon line ) 5 and 6 Spool with “quiet” line for FE 55 Spool w/o line Nylon line 7.5 m (25 ft) 2 mm dia. (.080 in dia.) Reel “quiet” nylon line 15 m (50 ft) Reel nylon line 15 m (50 ft) (A, B; see page 42) Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42) Snap ring Hex. nut M 12 Cap , 7 and 8

PART 4 Spare Parts and Accessories AUTOCUT® 5-2, Mowing Head Ind. Part Number No.

2 1

2


4006 710 2103

1

1 4006 710 3600

1

2 4004 713 8300 3 0000 997 2100 4 4004 710 4300

1 1 1

5 4004 713 3000 6

1 1

0000 930 2584 0000 930 2588

1 1

7 9465 620 2771 8 4006 710 4000

1 1

3 4, 5 6

“AUTOCUT 5-2” mowing head )1-8 Spool housing ,2 Eyelet Helical spring Spool with nylon line ) 5 and 6 Spool w/o line Nylon line 6 m (19’) 2 mm dia. (.080 in dia.) Reel “quiet” nylon line 15 m (50 ft) Reel nylon line 15 m (50 ft) (A, B; see page 42) Snap ring Cap, , 7

7 8

No longer available

AUTOCUT® C 5-2, Mowing Head Ind. Part Number No.

4006 710 2106 1 2 1

7

4

2, 3


1 1 1

0000 930 2584 0000 930 2588

1 1

3 4006 713 3000 4

1 1

5 0000 997 2100 6 4006 710 4001 7 0000 967 3706

1 1 1

“AUTOCUT C 5-2” mowing head )1-7 Spool housing (D) Spool with “quiet“ nylon line (D) ) 3 and 4 Reel “quiet” nylon line 15 m (50 ft) Reel nylon line 15 m (50 ft) (A, B; see page 42) Spool w/o line Nylon line 4 m (13’) 2 mm dia. (.080 in dia.) Helical spring Cap Warning pictogram

5

6

31

PART 4 Spare Parts and Accessories AUTOCUT® 11-2, Mowing Head Ind. Part Number No.

2 1

2 3

4004 710 2192

1

1 4004 710 3600

1

2 4004 713 8300 3 0000 997 2100 4 4004 710 4300

1 1 1

4 4004 710 4304 5 4004 713 3000 6

1 1 1

0000 930 2584 0000 930 2588

1 1

4, 5 6

7 8


6

1 0000 930 2587

1

7 9465 620 2771 8 9210 260 1400 9 4004 710 4000

1 1 1

9

“AUTOCUT 11-2” mowing head )1-9 Spool housing ,2 Eyelet Helical spring Spool with nylon line ) 5 and 6 Spool with “quiet” line for FE 55 Spool w/o line Nylon line 6 m (19’ 18“) 2 mm dia. (.080 in dia.) Reel “quiet” nylon line 15 m (50 ft) Reel nylon line 15 m (50 ft) (A, B; see page 42) Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42) Snap ring Hex. nut M 12 Cap, , 7 and 8

AUTOCUT® 20-2 Ind. Part Number No.

No longer available

4002 710 2106

1

1 4004 710 3601

1

1

2 4004 713 8300 3 0000 997 2100 4 4002 710 4307

2 1 1

2

5 4002 713 3007 6

1 1

3

0000 930 2587

1

7 9465 620 2771 8 9210 260 1410 9 4002 710 4000

1 1 1

10 4002 713 6501

1

10

2

4, 5 6

7 8 9

32


“AUTOCUT 20-2” mowing head (C) ) 1 - 10 Spool housing ,2 Eyelet Helical spring Spool with nylon line ) 5 and 6 Spool w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42) Snap ring Hex. nut M 12 l/h Cap , 7 and 8 Shaft bolt M 10


4002 710 2192

1

1 4004 710 3600

1

2 4004 713 8300 3 0000 997 2100 4 4002 710 4307

2 1 1

5 4002 713 3007 6

1 1

0000 930 2587

1

7 9465 620 2771 8 9210 260 1410 9 4002 710 4000

1 1 1

10 4002 713 6501

1

10

2 1

2 3 4, 5 6


“AUTOCUT 21-2” mowing head ) 1 - 10 Spool housing ,2 Eyelet Helical spring Spool with nylon line ) 5 and 6 Spool w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42) Snap ring Hex. nut M 12 l/h Cap , 7 and 8 Shaft bolt M 10

7 8 9

AUTOCUT® 24-2 No longer available


8 2

1 2 3 4 5 6 7 8 9

1 2 3 4

5

4002 710 2109

1

4002 713 3607 4110 713 8300 4002 713 6803 0000 997 3801 4002 713 3002 4002 713 6302 4002 713 7001 4126 713 6500

1 2 1 1 1 1 1 1 1

0000 930 2587

1

“AUTOCUT 24-2” mowing head (C) ) 1 - 10 Spool housing Eyelet Nut Helical spring Spool w/o line Bump knob Cover Shaft bolt M 10 Nylon line 7.5 m (25 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42)

6

7

681KT103 AM

9


33


2 1

2 3


4002 710 2191

1

4002 713 9608 4003 713 8300 4002 713 6801 0000 997 1501 4002 710 4313

1 2 1 1 1

6 4002 713 3008 7

1 2

0000 930 2587

1

8 4002 713 9708

1

1 2 3 4 5

4

“AUTOCUT 25-2” mowing head )1-8 Spool housing Eylet Collar nut M 10 Helical spring Spool with nylon line ) 6,7 Spool w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50ft) (A, B; see page 42) Cover

5, 6 7

8

AUTOCUT® 30-2 and AUTOCUT® 40-2 12


4002 710 2187

1

4003 713 9605 4003 713 8300 4002 713 6801 0000 997 1601 4002 710 4311

1 2 1 1 1

3, 9

6 4003 713 3005 7

1 2

4

8 4003 713 9705

1

2 1

2

1 2 3 4 5

4003 710 2189

5, 6, 10 7, 11

8

34


9 4003 713 6800 10 4003 710 4303

1 1

11

2 0000 930 2586

1

12 4111 716 9300

1

“AUTOCUT 30-2” mowing head )1-8 Spool Housing Eyelet Collar nut M 10 Helical spring Spool with nylon line ) 6, 7 Spool w/o line Nylon line 7.5 m (25ft) 2.4 mm dia. (.095 in dia.) Cover

“AUTOCUT 40-2” mowing head ) 1, 2, 4, 6 and 8 - 12 Collar nut M 12 Spool with nylon line ) 6, 11 Nylon line 6 m (19 ft) 2.7 mm dia. (.105 in dia.) Reel nylon line 10.7 mm (35 ft) (A, B; see page 42) Ring

PART 4 Spare Parts and Accessories AUTOCUT® 40-4 9

1, 10

2

2 3, 11, 12



4003 710 2120

1

4003 713 9610 4003 713 8300 4003 713 6800 0000 997 1601 4003 710 4302

1 4 1 1 1

6 4003 713 3010 7

1 4

8 4003 713 9705 9 4111 716 9300

1 1

4005 710 2102

1

10 4005 710 9600

1

11 4003 713 6801 12 4005 713 6800

1 1

1 2 3 4 5

“AUTOCUT 40-4” mowing head (C) )1-9 Housing Sleeve Collar nut M12 Helical spring Spool with nylon line ) 6 and 7 Spool insert Nylon line 3 m (9 ft) “Quiet nylon line” 2.4 mm dia. (0.095 in dia.) (A, B; see page 42) Cover Ring

4 5, 6

8

“AUTOCUT 40-4” mowing head ) 2, 4 - 12 Housing , 11 Collar nut M12 Collar nut M14

35

PART 4 Spare Parts and Accessories SuperCut™ 10-1 Ind. Part Number No.

1

3 7

2


4004 710 2189

1

1 4004 710 9600

1

2 4002 713 8310 3 4002 713 3400 4 4004 710 4302

2 1 1

5 4002 713 3010 6

1 1

0000 930 2587

1

7 4004 713 6800 8 4002 713 9710

1 1

4, 5 6

“SuperCut 10-1“ mowing head )1-8 Housing , Pawl (A, D) Torsion ring (A, D) Plug (A,D) Eyelet Brow Spool with nylon line ) 5 and 6 Spool w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50ft) (A, B; see page 42) Collar nut M 12 Cover

8

No longer available

SuperCut™ 20-1 No longer available


1

2 7

3

4002 710 2185

1

1 4002 710 9605

1

2 4002 713 8310 3 4002 713 3400 4 4002 710 4304

1 1 1

5 4002 713 3010 6

1 1

0000 930 2587

1

7 4002 713 6804 8 4002 713 9710

1 1

2 5 4

6

8

36


“SuperCut 20-1“ mowing head ) 1 and 8 Housing , Pawl (A, D) Torsion ring (A, D) Plug (A, D) Eyelet Bow Spool with line ) 5 and 6 Spool w/o line Nylon line 5 m (16 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42) Collar nut M 10 (l/h thread) Cover

PART 4 Spare Parts and Accessories SuperCut™ 20-2 Ind. Part Number No.

1

2

3

4

4

3 8 5, 6


4002 710 2184

1

1 4002 710 9615

1

2 3 4 5 6 7

4002 713 7315 4002 713 8310 4002 713 3400 4002 710 4309 4002 713 3015

1 1 2 1 1 1

0000 930 2587

1

8 4002 713 6805 9 4002 713 9715

1 1

“SuperCut 20-2“ mowing head )1-9 Housing , Pawl (A, D) Torsion ring (A, D) Plug (A, D) Index plate Eyelet Bow Spool with nylon line ) 5 and 6 Spool w/o line Nylon line 7.5 m (25 ft) 2.4 mm dia. (.095 in dia.) Reel nylon line 15 m (50 ft) (A, B; see page 42) Collar nut M 10 (l/h thread) Cover

7

9

SuperCut™ 2-1 Ind. Part Number No.

2

4002 710 2148

1

4002 713 9605 4002 713 6802 0000 958 0516 4002 713 7205 4002 713 6500 4002 713 8305 4002 713 7300 4002 713 6905 4002 998 4000 4002 713 6900 4002 713 6910 4002 710 4381

1 2 2 2 2 2 1 1 1 1 1 1

13 4002 713 3005 14

1 1

15 4002 713 6801 16 4002 713 9705 17 4002 893 1300 0000 930 2587

1 1 1 1

6 1 10 3 4 5

6

11

15 12

7

13

14

8 16


681KT088 AM

9


1 2 3 4 5 6 7 8 9 10 11 12

“SuperCut 2-1“ mowing head (C) ) 1 - 17 Housing Nut Washer Pawl Collar screw Eyelet Index plate Synchronizer ring Torsion ring Adjuster ring Ratchet wheel Spool with nylon line ) 13 and 14 Spool w/o line Nylon line 7.5 m (25 ft) 2.4 mm dia. (.095 in dia.) Collar nut M 10 (l/h thread) Cover Special wrench Reel nylon line 15 m (50 ft) (A, B; see page 42)

37

PART 4 Spare Parts and Accessories SuperCut™ 2-2 2


4002 710 2142

1

4002 713 9605 4002 713 6802 0000 958 0516 4002 713 7205 4002 713 6500 4002 713 8305 4002 713 7300 4002 713 6905 4002 998 4000 4002 713 6900 4002 713 6910 4002 710 4380

1 2 2 2 2 2 1 1 1 1 1 1

13 4002 713 3005 14

1 1

15 4002 713 6801 16 4003 713 9700 17 4002 893 1300 0000 930 2587

1 1 1 1

6 1 10 3 4

6

11

15

5

12, 13 7 14 8 9

681KT088 AM

16



1 2 3 4 5 6 7 8 9 10 11 12

“SuperCut 2-2“ mowing head ) 1 - 17 Housing Nut Washer Pawl Collar screw Eyelet Index plate Synchronizer ring Torsion ring Adjuster ring Ratchet wheel Spool with nylon line ) 13 and 14 Spool w/o line Nylon line 7.5 m (25 ft) 2.4 mm dia. (.095 in dia.) Collar nut M 10 Cover Special wrench Reel nylon line 15 m (50 ft) (A, B; see page 42)

SuperCut™ 40-2 2


18

4003 710 2142

1

4002 713 9605 4002 713 6802 0000 958 0516 4002 713 7205 4002 713 6500 4002 713 8305 4002 713 7300 4002 713 6905 4002 998 4000 4002 713 6900 4002 713 6910 4002 710 4380

1 2 2 2 2 2 1 1 1 1 1 1

13 4002 713 3005 14

1 1

15 16 17 18

1 1 1 1 1

6 1 10 3

6

4 5

11

15 14

12 13

7

8 9

17

38

681KT089 AM

16


1 2 3 4 5 6 7 8 9 10 11 12

4003 713 6800 4003 713 9700 4002 893 1300 4111 716 9300 0000 930 2587

“SuperCut 40-2“ mowing head ) 1 - 18 Housing Nut Washer Pawl Collar screw Eyelet Index plate Synchronizer ring Torsion ring Adjuster ring Ratchet wheel Spool with nylon line ) 13 and 14 Spool w/o line Nylon line 7.5 m (25 ft) 2.4 mm dia. (.095 in dia.) Collar nut M 12 Cover Special wrench Ring Reel nylon line 15 m (50 ft) (A, B; see page 42)

PART 4 Spare Parts and Accessories PolyCut™ 5-3 and PolyCut™ 6-3 Ind. Part Number No.

6, 11

4004 710 2180

1

1 4004 713 9601 2 4004 713 6600

1 3

1, 8

3 4111 007 1001

3 1

Replacement blade Replacement blade kit (bag of 12; A)

2

4 5 6 7

4004 713 9701 9210 260 1400 4130 713 1501 4130 893 7800

1 1 1 1

Lower half Nut M12 Thrust plate Pin (A)

4006 710 2104

1

8 4006 713 9600 4004 713 9601 9 0000 955 0904 10 4006 713 6800 11 4140 713 1501

1 1 1 1 1

“PolyCut 6-3“ mowing head ) 2 - 4 and 7 - 11 Upper half Q Upper half R Nut M8 Q Collar nut M8 R Trust plate

Q For previous version, 4006 713 9600 must be used with 0000 955 0904

5, 9

681KT104 AM

3

10


“PolyCut 5-3“ mowing head )1-7 Upper half Bolt

R For new version, 4004 717 9601 must be used with 4006 713 6800

PolyCut™ 10-3 and PolyCut™ 20-3 Ind. Part Number No.


4004 710 2188

1

1 4004 710 9610

1

2 3 4 5 6 7

4111 007 1001

1 2 3 3 3 1

4002 710 2189

1

8 4002 710 9600

1

4002 713 9700 4002 713 8300 4111 710 8700 9210 319 0900

“PolyCut 10-3“ mowing head )1-7 Upper half , Nut (A, D) Lower half Eyelet Shoulder stud Hex. nut M 6 Replacement blade Replacement blade kit (bag of 12) (A)

“PolyCut 20-3“ mowing head )2-8 Upper half , Nut (A, D)

39

PART 4 Spare Parts Accessories

PolyCut™ 40-3 Ind. Part Number No.

4 6

1 2 3 4 5 6 7 8

1

7


4111 710 2190

1

4111 713 9601 4111 713 9701 4002 713 8300 4111 716 9300 4111 710 8700 9210 319 0900

1 1 2 1 3 3 3 1

4111 007 1001

“PolyCut 40-3“ mowing head )1-8 Upper half Lower half Eyelet Ring Shoulder stud Hex. nut M 6 Replacement blade Replacement blade kit (bag of 12) (A)

3

2

5

Sales designations for Mowing heads and Cultivators Original sales designation

New sales designation

Part. No.

AUTOCUT

-

4002 710 2100

AUTOCUT 2-1

-

4002 710 2150

-

AUTOCUT 10-2, 11-2

4004 710 2100, 4004 710 2192

-

AUTOCUT 20-2, 21-2

4002 710 2106, 4002 710 2193

SuperCut 1

SuperCut 40-2

4003 710 2142

TrimCut 30-2, 40-2, 50-2

4002 710 2193, 4003 710 2193, 4005 710 2193

Polymatic 2

Polymatic 30-2

4002 710 2120

Polymatic 1

Polymatic 40-2

4003 710 2100

-

PolyCut 5-3, 6-3

4004 710 2180, 4006 710 2104

Polycut 2

PolyCut 20-3

4002 710 2189

Polycut 1

PolyCut 40-3

4111 710 2190

BC 1

BC 30

4600 710 1500

BC 4

BC 20

4600 710 1510

40

PART 4 Spare Parts and Accessories

Sharpening tools Ind. Part Number No.

1

5

4

7 8

Flat sharpening file 200 mm for brush knife and grass cutting blades

2 5605 750 4343

File holder for chisel-tooth circular saw blades , 3 and 4

3 5605 772 5506

Round file 5.5 mm dia. x 200 mm

4 0811 490 7860

File handle A 100

5 4020 893 5000

Saw set for resetting chisel tooth circular saw blades

6 0457 342 2629

Sharpening template for Brush knife 250 mm dia. (B)

6 0457 342 2631


6 0457 342 2636


7 4020 890 5500

Sharpening template for all STIHL Brush knifes (B)

8 5910 850 2600

Balancer for brush knife and grass cutting blade (B)

4

1 2 3 4 5 6

6 7

7 8

8

81KT162 AM

1 2 3 4 5 6

1 0814 212 3310 3

2


41

PART 4 Spare Parts and Accessories Multi-Polymer Cutting Line (Packaged Coils and Bulk Quantities) Ind. Part Number No.

0.065 in dia 0000 930 2589

1

1 1 1 1 1

*

1 1 1 1 1

Green

50 ft 1/2 lb 1 lb 3 lb 5 lb

0.095 in dia * 0000 930 2587 0000 930 2582 0000 930 2579 0000 930 2246 0000 930 2247

50 ft 1/2 lb 1 lb 3 lb 5 lb


Blue

50 ft

0.080 in dia 0000 930 2588 0000 930 2583 0000 930 2580 0000 930 2263 0000 930 2264



0.105 in dia 0000 930 2586 0000 930 2540 0000 930 2578 0000 930 2227 0000 930 2289

1 1 1 1 1

35 ft 1/2 lb 1 lb 3 lb 5 lb

0.130 in dia

Orange

0000 930 2585 0000 930 2541 0000 930 2577 0000 930 2287 0000 930 2290

1 1 1 1 1

1 1 1

50 ft 1/2 lb 1 lb

Note: SuperCut™ heads should only be used with STIHL .095“ SuperCut™ grade line.

Commercial Trimmer Line / Commercial Square Line Ind. Part Number No.




Dark Green Color 0.095 in dia 0.095 in dia 0000 930 2726 0000 930 2717 0000 930 2718

1 1 1

1 lb 3 lb 5 lb

0000 930 2601 0000 930 2602

1 1

3 lb 5 lb

0.105 in dia 0.105 in dia 0000 930 2727 0000 930 2728 0000 930 2729

42

1 1 1

1 lb 3 lb 5 lb

0000 930 2626 0000 930 2627

1 1

Black

25 ft 1/2 lb 1 lb 3 lb 5 lb

“Quiet nylon line“ 0.080 in dia 0000 930 2584 0000 930 2581 0000 930 2576

Red

3 lb 5 lb

Green

PART 4 Spare Parts and Accessories Transport guard for metal cutting blades Ind. Part Number No. 1

2


1 4112 790 3902

1

2 4112 790 4200

1

3 4116 790 3900

1

3 4116 790 3901

1

4 4000 792 4300 5 4000 792 4200

1 1

5

Transport guard (C) (to 250 mm dia.) ,2 Retaining strap Transport guard (C) (to 350 mm dia.) ,4 Transport guard (to 350 mm dia.) ,4 Clamping clip Retaining strap

3

681KT093 AM

4

7


6


6 4119 790 3901

1

7 4119 792 4300

1

8 4119 790 3906

1

9 4119 792 4305

1

Transport guard (to 225 mm dia.) ,7 Clamping clip Transport guard (225 mm dia. - 255 mm dia.) ,9 Clamping clip

9

681KT094 AM

8

43

PART 4 FS 55 RT, 83 RT, 85 RT, 110 RT

Attachments for STIHL Multi-Cut Professional Series™

HT HL - 0°

HL - 0°...90°

BC 35 FCS

FH

FCB (FC)

681KT148 KN

KW available late 2002

FCS

(FC) FCB

FH

HL - 0°

HL 0...90°

HT

KW

FS 55 RT

–

●

●

–

●

–

●

●

FS 83 RT

–

●

●

–

●

–

●

●

–

●

●

–

●

–

●

●

FS 110 RT

–

●

●

–

●

–

●

●

FS 55 RT

●

●

●

●

●

●

●

●

FS 83 RT

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

FS 85 RT FS 110 RT

l = approved

–

44

= not approved

002BA003 K

FS 85 RT

002BA002 K

BC 35

PART 4 Gearbox attachments for STIHL Power Tools

HL - 0...90°

HL - 0°

FH

BC 35 FCS

HT

681KT149 KN

KW

Not approved for use on FS 85 RX, FS 110 RX, HT 73, HT 75

FCS

FH

HT

HL - 0°

HL 0...90°

KW

FS 83

●

–

●

–

–

–

–

FS 85 Q

●

–

●

–

–

–

–

FS 110

●

–

●

–

–

–

–

FS 120

●

–

–

–

–

–

–

●

–

–

–

–

–

–

FS 250

●

–

–

–

–

–

–

HL 73 - 0°, 75 - 0°

–

–

–

●

●

–

–

–

–

–

–

●

–

–

–

–

–

●

●

–

–

HL 73 K - 0°, 75 K - 0° HT 70

002BA131 KN

FS 200

002BA001 K

BC 35

l = approved

–

= not approved

Q Not approved for FS 85 from serial number 2 49 848 196 till 2 xx xxx xxx

45

PART 4 Gearbox attachments for STIHL Power Tools FCS

FH

HT

HL - 0°

HL 0...90°

KW

FC 83, 85, 110

–

●

–

●

●

–

●

FH 75

–

●

–

●

●

–

●

FS 83 R

–

●

–

●

●

–

●

–

●

–

●

●

–

●

FS 110 R R

–

●

–

●

●

–

●

HL 73, 75

–

●

–

●

●

–

●

HL 73 K, 75 K

–

–

–

–

●

–

–

KW 85

–

●

–

●

●

–

●

FS 85 R QR

002BA002 K

BC 35

l = approved

–

= not approved

Q Not approved for FS 85 R from serial number 2 49 848 196 till 2 xx xxx xxx R Not approved for FS 85 RX and FS 110 RX

FCS

FH

HT

HL - 0°

HL 0...90°

KW

FC 83, 85, 110

●

●

●

●

●

●

●

FH 75

●

●

●

●

●

●

●

FS 83 R

●

●

●

●

●

●

●

FS 85 R QR

●

●

●

●

●

●

●

FS 110 R R

●

●

●

●

●

●

●

FS 120 R, 200 R

●

–

–

–

–

–

–

FS 250 R

●

–

–

–

–

–

–

HL 73, 75

●

●

●

●

●

●

●

HL 73 K, 75 K

–

–

–

–

●

●

–

KW 85

●

●

●

●

●

●

●

002BA003 K

BC 35

l = approved

–

= not approved

QNot approved for FS 85 R from serial number 2 49 848 196 till 2 xx xxx xxx RNot approved for FS 85 RX and FS 110 RX

46

PART 4 Spare Parts and Accessories Cutter Bar Assembly and Blades

Key to symbols ) = consisting of item No. , = including item No.

47

HS 61 HS 246

HL HL 45 HL 73 HL 73 K HL 75 HL 75 K

FH 75

–

–

–

–

l

–

l

–

–

–

l

–

–

–

–

550 mm 4226 710 5911 (C) 600 mm (24”) 4226 710 5904 (C) 4226 110 5905

–

–

l

–

–

–

700 mm 4226 710 5921 (C) 750 mm (30”) 4226 710 5922 (C) 4226 710 5923

–

–

l

–

–

–

1000 mm 4226 710 5951 (C) 1000 mm (40”) 4226 710 5952 (C) 4226 710 5953

–

–

l

–

–

–

550 mm 4230 710 6000 (C) 500 mm (20”) 4230 710 6001 (C) 4226 710 5953

–

–

–

–

l

–

4230 710 6020

–

–

–

–

–

l

450 mm (18“) 4238 713 4300 (2x)

l

–

–

–

–

–

HS 45

HS 72 HS 74 HS 75 HS 80

HS 76 HS 85

420 mm 4226 710 5931 (C) 500 mm (20”) 4226 710 5932

–

l

550 mm 4226 710 5901 (C) 600 mm (24”) 4226 710 5903

–

700 mm 4226 710 5941 (C) 750 mm (30”) 4226 710 5942

= approved – = not approved (A) = not illustrated

l

(B) = option (C) = no longer available (D) = not available as separate item

Acesorios desbrozadora

Recommend Documents