DIY Suppliers List

PARAGON GUNSMITHS

DIY SUPPLIERS LIST AUTHOR: GARY SALISBURY

PROTECT YOUR 2ND AMENDMENT RIGHTS This document is a list of all known partially finished AR receivers and contains both manufacturers’ & resellers’ information. If you are aware of any additions, deletions, corrections, or general suggestions on how to make this a better reference source, please contact me at [email protected] and I will try to incorporate those suggestions into the next version of the document. This document can be freely copied and redistributed but not charged for. The current version of the document is stored on http://www.homegunsmith.com under the “AR-15 Specific Home Smithing” group.

DIY SUPPLIERS LIST Contents ANCHOR HARVEY .......................................................................................................................................... 7 Forged Lowers 0% Blanks.......................................................................................................................... 7 APEX BRASS ................................................................................................................................................... 7 UT Arms 80% Billet AR-15 Lower Receiver ............................................................................................... 7 UT Arms 80% AR-15 Drill Jig Fixture.......................................................................................................... 8 AR-15 JIGS ..................................................................................................................................................... 8 AR-15 Lower Receiver (70% Complete) .................................................................................................... 8 AR-15 Lower Receiver (75% Complete)with Magwell Cut ........................................................................ 8 AR-15 Drill Jig (Without Buffer Plate) ....................................................................................................... 8 AR-15 Drill Jig (With Buffer Plate) ............................................................................................................. 9 AR-10 Lower Receiver (60% Complete) .................................................................................................... 9 AR-10 Lower Receiver (75% Complete) with Magwell Cut ....................................................................... 9 AR-10 Jig .................................................................................................................................................... 9 AR-15 PLUS .................................................................................................................................................. 10 AR-15 HPS Forged Receiver .................................................................................................................... 10 Black Anodized AR-15 Mil A 8625 Type 2 Class 2 ................................................................................... 10 Golden Gun - Bronze Coated Receiver - PCR 80 ..................................................................................... 10 Baxter Jig (No Drill Guide) ....................................................................................................................... 11 Baxter Jig (with Drill Guide) .................................................................................................................... 11 Baxter Jig (with Drill Guide & Drills) ........................................................................................................ 11 ARES ARMOR............................................................................................................................................... 12 80% AR-15 Lower Receiver (Raw) ........................................................................................................... 12 80% AR-15 Lower Receiver (Anodized) ................................................................................................... 12 80% AR-15 Jig .......................................................................................................................................... 12 80% AR-10 DPMS .308 (Raw) .................................................................................................................. 13 80% .308 Lower Jig .................................................................................................................................. 13 CNC GUNS ................................................................................................................................................... 13 CNC10 10% Lower "Paperweight" .......................................................................................................... 13 416 Clone 11% Lower - GROUP BUY ....................................................................................................... 13 10% AR-45 Lower Receivers -Paperweights ........................................................................................... 14 100% AR-45 ............................................................................................................................................. 14 AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 2 OF 39

DIY SUPPLIERS LIST AR-15 Drilling Jig ..................................................................................................................................... 14 AR-15 Milling Adapter Kit........................................................................................................................ 14 Trigger Slot Milling Adapter Kit ............................................................................................................... 15 .308 Drilling Jig ........................................................................................................................................ 15 DIY GUNS..................................................................................................................................................... 15 80% AR-15 Lower Receiver (Mil Spec, Alloy 7075-T6) ............................................................................ 15 DIY HOME BUILT AR-15 LOWER PLANS....................................................................................................... 16 Mail Order Plans ..................................................................................................................................... 16 DSA .............................................................................................................................................................. 16 A2 Upper 0% Forging .............................................................................................................................. 16 A2 Lower 0% Forging .............................................................................................................................. 16 HLF Manufacturing, LLC .............................................................................................................................. 17 AR-15 80% Lower Reciever ..................................................................................................................... 17 AR-15 Stripped Upper Reveiver .............................................................................................................. 17 GOONDOG .................................................................................................................................................. 18 The BLUE Jig ............................................................................................................................................ 18 KT ORDINANCE ............................................................................................................................................ 18 KT-10-A Aluminum Frame ....................................................................................................................... 18 KT-15-A Aluminum Frame ....................................................................................................................... 18 KT-15-B Aluminum Frame ....................................................................................................................... 18 LES BAER CUSTOM ...................................................................................................................................... 19 0% Upper Forging.................................................................................................................................... 19 0% Lower Forging .................................................................................................................................... 19 60% Lower Forging .................................................................................................................................. 19 M-16 PARTS.COM ....................................................................................................................................... 20 80% Lower Receiver ................................................................................................................................ 20 80% Jig Set for 80% Lower Receivers ...................................................................................................... 20 AR-15 80% Combination Set ................................................................................................................... 20 80% lower receiver .308 or 7.62 X 51 type receivers ............................................................................. 21 AR-10 80% lower receiver jig set ............................................................................................................ 21 McKAY ENTERPRISES ................................................................................................................................... 21 AR-15-A2 Lower Receiver Part #: RM16A2 (100%) ............................................................................... 21 AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 3 OF 39

DIY SUPPLIERS LIST MOGUN PARTS............................................................................................................................................ 21 NATIONAL ORDNANCE ................................................................................................................................ 22 National Ordnance Corp AR-15 80% Lower ............................................................................................ 22 NODAKSPUD, LLC ........................................................................................................................................ 22 NDS-601 .................................................................................................................................................. 22 NDS-XM16E1 ........................................................................................................................................... 22 NDS-16A1 Gray ....................................................................................................................................... 22 BLEMS ..................................................................................................................................................... 23 NDS-603 .................................................................................................................................................. 23 OSI GUNSMITHING TOOLS .......................................................................................................................... 23 National Ordnance Corp AR-15 80% Lower ............................................................................................ 23 OSI Super Jig AR Type Drilling Jigs for 80% Finished Lowers .................................................................. 23 Export Jig kit for AR ................................................................................................................................. 24 REDMOND BLACK RIFLE .............................................................................................................................. 24 The AR-15 Non-Anodized 80%Heat Treated 7075-T6 Alloy.................................................................... 24 The AR-15 Black Anodized 80%Heat Treated 7075-T6 Alloy .................................................................. 24 Standard Fixture (AR Jig) ......................................................................................................................... 24 308 Lower (DPMS Platrorm) Heat Treated 7075-T6 Alloy ...................................................................... 25 Jig—308 ................................................................................................................................................... 25 RGUNS ......................................................................................................................................................... 25 AR-15 Lower Receiver 0% Forging Paperweight ..................................................................................... 25 SGT. FREEDOM ............................................................................................................................................ 26 Rapid Rifle Castings ................................................................................................................................. 26 SLICKGUNS.COM ......................................................................................................................................... 26 AR-15 & AR-10 Lower Reveiver and Jig Combo Set ................................................................................ 26 TACTICAL INOVATIONS INC. ........................................................................................................................ 26 AR-15 LOWER RECEIVER RAW FORGING ................................................................................................ 27 TACTICAL MACHINING, LLC ......................................................................................................................... 27 30% AR-15 Lower Receiver (7075-T6 forgings) ....................................................................................... 27 80% AR-15 Lower Receiver (7075-T6 forgings) ....................................................................................... 28 80% AR-15 Anodized Lower Receiver (7075-T6 forgings) ....................................................................... 28 (5) 80% AR-15 Lower Receivers (7075-T6 forgings) ................................................................................ 28 AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 4 OF 39

DIY SUPPLIERS LIST 80% AR-15 Jig .......................................................................................................................................... 29 80% .308 Lower Receiver Raw (7075-T6 forgings).................................................................................. 29 80% .308 Lower Receiver Anodized (7075-T6 forgings) ......................................................................... 29 80% .308 Lower Jig .................................................................................................................................. 29 TANNERY SHOP ........................................................................................................................................... 30 BRONZIE .................................................................................................................................................. 30 UT ARMS ..................................................................................................................................................... 30 UT ARMS AR-15 80% Lower .................................................................................................................... 30 VADER SPADE .............................................................................................................................................. 30 TM 80% Receivers (engraved) ................................................................................................................ 31 Type II Anodizing in Black........................................................................................................................ 31 WINE COUNTRY WEAPONS ......................................................................................................................... 32 The Blue Jig AR-15 .223 Drill / Mill jig (Listed as New Item) ................................................................... 32 AR-10 Style 308 80% Lower .................................................................................................................... 33 LOWER RECEIVER MANUFACTURING Tutorials .......................................................................................... 34 1.

CNC Gunsmithing –Quick Start Guide: ............................................................................................ 34

2.

CNC Gunsmithing - Original style with fire control pocket milled: ................................................. 34

3.

CNC Gunsmithing – Newer style with fire control pocket solid:..................................................... 34

4.

Gunsmithing Work - Machining An AR-15 Lower Receiver: ........................................................... 34

5.

Homebuilt - HPDE AR15 Lower: ...................................................................................................... 34

6.

Ray Brandes - Machining the AR15 Lower Receiver Forging .......................................................... 34

7.

UT Arms - 80% Lower Completion on the Mini Mill: ...................................................................... 34

8.

UT Arms 80% Billet Lower Completion on a Drill Press .................................................................. 34

9.

Vader Spade – Lower Machining Tutorial ....................................................................................... 34

10.

Anodizing Aluminum by Ron Newman ....................................................................................... 34

11.

How I Anodize Aluminum by ratyoke ......................................................................................... 34

12.

Smart Flix Video Rentals - Anodizing Aluminum for Fun and Profit ........................................... 34

13.

Smart Flix Video Rentals - Building the AR-15 ............................................................................ 34

14.

Smart Flix Video Rentals - AR-15 Armorer Course ...................................................................... 34

15.

Smart Flix Video Rentals - Building an AR-15 from a 0% Forging ............................................... 35

LEGAL INFORMATION FROM THE ATF: ....................................................................................................... 36 1.

Is it legal to assemble a firearm from commercially available parts kits? ...................................... 36

AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 5 OF 39

DIY SUPPLIERS LIST 2.

Does the GCA prohibit anyone from making a handgun, shotgun or rifle? ................................... 38

PROTECT YOUR 2ND AMENDMENT RIGHTS ................................................................................................. 39


VERSION: 2012-11-24

PAGE 6 OF 39

DIY SUPPLIERS LIST ANCHOR HARVEY Web Site: http://www.anchorharvey.com/ Contact: Kelley Marti, Customer Services Coordinator Phone: 815-233-3833 mailto:[email protected]

Forged Lowers 0% Blanks

$

Forging is the process of heating metal, in our case Aluminum, Brass and Copper, to a moldable temperature, and then using precision machined dies to forge parts to a near net shape. This process does not change the grain structure of the metal, resulting in stronger parts. When compared to machining bar stock, forged parts are already in near net shape, which reduces the cycle time required to machine the part, and gives our clients more capacity on their machining, and reduces freight time and scrap costs, ultimately reducing their cost. When compared to mold casting, which is the melting of the metal and pouring of the liquid metal into molds, forging is superior in strength - in most cases 15% stronger, and is porosity free which is ideal for cosmetic surface requirements. The process begins with only the finest extruded raw materials, usually round stock, however, more flexibility with our mills have allowed us to design custom shapes to be extruded, reducing the overall forging cost along with supporting more complex designs. The stock is cut to length on one of five saws based on part requirements, and then is transferred into the forge ovens, where aluminum stock is heated to between 800 to 900 degrees Fahrenheit, depending on which alloy is being processed. We then forge the parts using precision-machined closed die forging presses resulting in a perfectly dimensioned forging. Parts move from here to various trimming, heat-treating, washing, and finishing processes, and then to shipping or to machining or polishing. The final result is stronger parts, with less waste, and lower cost. Watch this video to see how blanks are forged. http://www.anchorharvey.com/the_process.html

APEX BRASS Web Site: http://www.apex-brass.com Contact: Phone:

UT Arms 80% Billet AR-15 Lower Receiver

$154.99

Each lower is fully CNC machined from a 15 lb 7075-T6 aluminum billet on a CNC horizontal machining center at an ISO 9001 certified factory. No highly stressed and inaccurate forgings are used. Every surface of the lowers is machined. The lower maintains close tolerances on all features to ensure a perfect part every time. The magazine well is EDM machined out to ensure no mismatch from milling and broaching. The magazine well also had a much larger flare than a typical forged receiver for quicker more reliable reloading. Finally, the lower receivers are tested for dimensional accuracy on a Zeiss UPMC Ultra CMM. AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 7 OF 39

DIY SUPPLIERS LIST UT Arms 80% AR-15 Drill Jig Fixture

$144.99

The UT Arms Drill Jig Fixture allows the purchaser to complete the UT Arms 80% AR-15 Receiver quickly with tools found in any handyman's tools box. If a purchaser has a drill or a drill press this drill jig will help finish the receiver. The drill jig itself is made in an ISO 9001 certified machines shop on CNC machine tools that also make the 80% AR-15 lower receivers. The jig uses steel pins to properly align with the receiver. The steel pins mate with the front and read take down pins. An allen screw holds the two drill jig halves together when attached to the lower receiver. To help protect the receiver from scratches the drill jig is machines out of certified aircraft grade 7075-T6 aluminum. Finally, the drill jig has location holes for the fire control group as well as the trigger well.

AR-15 JIGS Web Site: http://AR-15jigs.com/index.html Contact: Phone:

AR-15 Lower Receiver (70% Complete)

$100.00

Two models to choose from. Started out as a 7 lb block of Aluminum. Top mating services for the upper, and the mag release button area are finished. The bolt stop area is finished. The surface where the buttstock bolts to is finished. The fire & sale are engraved on one side. Bigger radius added on some areas to beef up the receiver. UPS shipping for $5.00 on all items. We cannot ship to P.O. Boxes.

AR-15 Lower Receiver (75% Complete)with Magwell Cut

$125.00

Two models to choose from. Started out as a 7 lb block of Aluminum. Top mating services for the upper, and the mag release button area are finished. The bolt stop area is finished. The surface where the buttstock bolts to is finished. The fire & sale are engraved on one side. Bigger radius added on some areas to beef up the receiver. UPS shipping for $5.00 on all items. We cannot ship to P.O. Boxes.

AR-15 Drill Jig (Without Buffer Plate)

$100.00

CNC precision drilled fixture jig for completing a 0% to 75% AR-15 lower receiver. All jigs are drilled to mill-spec standards. This jig can be used over and over again.


VERSION: 2012-11-24

PAGE 8 OF 39

DIY SUPPLIERS LIST AR-15 Drill Jig (With Buffer Plate)

$145.00

CNC precision drilled fixture jig for completing a 0% to 75% AR-15 lower receiver. All jigs are drilled to mill-spec standards. This jig can be used over and over again. UPS shipping for $5.00 on all items. We cannot ship to P.O. Boxes.

AR-10 Lower Receiver (60% Complete)

$145.00

Compatible with ArmaLite, Eagle Arms, and Noveske uppers. Started out as a 7lb block of Aluminum. The take down holes, top mating surface for the upper, and the mag release button area are finished. The bolt-stop area is 90% done. The surface where the buttstock bolts to is finished. The fire & safe are engraved on both sides. The caliber is engraved on one side. Bigger radius added on some areas to beef up the receiver. UPS shipping for $5.00 on all items. We cannot ship to P.O. Boxes.

AR-10 Lower Receiver (75% Complete) with Magwell Cut

$175.00

Compatible with ArmaLite, Eagle Arms, and Noveske uppers. Started out as a 7lb block of Aluminum. The take down holes, top mating surface for the upper, and the mag release button area are finished. The bolt-stop area is 90% done. The surface where the buttstock bolts to is finished. The fire & safe are engraved on both sides. The caliber is engraved on one side. Bigger radius added on some areas to beef up the receiver. UPS shipping for $5.00 on all items. We cannot ship to P.O. Boxes.

AR-10 Jig

$125.00

CNC precision drilled fixture jig for completing a 0% to 75% AR-10 lower receiver. Receiver not included. All jigs are drilled to mill-spec standards. This jig can be used over and over again. UPS shipping for $5.00 on all items. We cannot ship to P.O. Boxes.


VERSION: 2012-11-24

PAGE 9 OF 39

DIY SUPPLIERS LIST AR-15 PLUS http://www.AR-15plus.com Contact: Vida Rica / VRI 5850 San Felipe, Suite 500 Houston, TX 77057 Phone: 713.866.4800 Email: [email protected]

AR-15 HPS Forged Receiver

$99.00

Fire Control Cavity is solid per BATF Guidance. The HPS has all the attributes of the JFM with additional finishing processes. Significant upgrade to market standards and specifications: 1. High purity 7075TG Aluminum for above specification hardness and metallurgical uniformity. 2. Additional mechanical hardening of Pivot for longer service 3. Additional finishing of surface tumbling for appearance and smoother definition. 4.Surface treatment above Specification for adhesion to multiple coatings. Ceramic Matrix Surface Impingement & Jewel Satin Finish.

Black Anodized AR-15 Mil A 8625 Type 2 Class 2

$119.00

MADE IN THE USA! Aluminum 7075 T6 alloy. Our HPS with additional Mil A 8625 Type 2 Class 2 Anodized finish. Fire Control Cavity is solid per BATF Guidance. Buffer tube tower drilled and tapped, Pre-Drilled for Trigger Guard. Pre-Drilled Pivot Pin and Take down, Trigger Guard pre-drilled. Mil Spec Broach Dimensions in Mag Well for Smooth Magazine Fit. Chamfer angle set to Mil-Spec.

Golden Gun - Bronze Coated Receiver - PCR 80

$145.00

BRONZIE: This unique receiver is produced from our forged HPS with non tarnish coating and a bronze etched substrata process to penatrate the surface. The Lower is processed to a high level of completion and ready for the technically minded to complete. Silicon Aluminum Bronze has the advantage of machininability equal to bronze but weight of the stainless steel lower for the competitive marksman. Because of their fine equiaxed grain structure, these Bronze Alloys are particularly recommended for pieces that will undergo detailed machining. Bronze offers the builder the option of a satin or brilliant polished finish. Alloys are manufactured to Military Specs.


VERSION: 2012-11-24

PAGE 10 OF 39

DIY SUPPLIERS LIST Baxter Jig (No Drill Guide)

$149.50

"Standard Jig with no drill plate or buffer attachment. Shown with forging for illustration purposes forging is not included. PCR forgings are now furnished with solid fire control cavity. A step up in quality of fixture and accuracy. Full enclosure of the Lower Receiver. This Jig is designed or the home smith with a drill press with a ½” chuck or a mill. CNC machined fixture blocks/ drill guide for completing your AR-15 lower receiver. Bolt them together and drill all the holes you need to finish the receiver. Two angles milled on side of one block to drill pistol grip bolt hole and buffer tube stop hole for quick setup easy drilling. Set milled angle on vice jaw, clamp up and your ready to drill. Blocks cover entire receiver: the bottom sets flush in a vice. This is a more complete version than other blocks. Blocks are made to the blueprint DIM. Bolt holes are counter-bored so fixture can set flush in your vice. Bolt heads do not protrude out of fixture. Directions are not included."

Baxter Jig (with Drill Guide)

$189.00

Shown with forging for illustration purposes forging is not included. Complete Baxter jig with Drill Plate included. A step up in quality of fixture and accuracy. Full enclosure of the Lower Receiver. This Jig is designed or the home smith with a drill press with a ½” chuck or a mill. CNC machined fixture blocks/ drill guide for completing your AR-15 lower receiver. Bolt them together and drill all the holes you need to finish the receiver. Two angles milled on side of one block to drill pistol grip bolt hole and buffer tube stop hole for quick setup easy drilling. Set milled angle on vice jaw, clamp up and your ready to drill. Blocks cover entire receiver: the bottom sets flush in a vice. This is a more complete version than other blocks. Blocks are made to the blueprint DIM. Bolt holes are counter-bored so fixture can set flush in your vice. Bolt heads do not protrude out of fixture. Directions are not included.

Baxter Jig (with Drill Guide & Drills)

$245.00

Baxter Jig and Drill Plate, Designed for PCR with solid fire control cavity, Forging DOES NOT REQUIRE A mill useful but not required, 7/32” Drill for pistol grip, 14/28 tap for pistol grip 6" X 3/32" Drill, 5/32" Drill, Two 1/4" Drills Also used for location, 3/16” Drill, 3/8" Drill, 1/8” Drill, Side cutting End Mill - Single End Mill Material Cobalt - M-42 Size: 3/8 Shank Diameter 3/8” Length of Cut: 3/8 Overall Length 2 1/8” with four Flutes: Type: Centercutting Stub 3/8” Shank Diameter 3/8” Length of Cut 3/8 “ Overall Length 2 1/8 “ Type Center cutting Stub Material: Cobalt - M-42 Finish/Coating: TiCN Rotation Right Hand Helix Angle 30.


VERSION: 2012-11-24

PAGE 11 OF 39

DIY SUPPLIERS LIST ARES ARMOR

(Tactical Machining Products and prices)

http://aresarmor.com/store/ 208 N Freeman St Oceanside, California 92054 Phone: 760-650-2737 ARES ARMOR host build parties (on the 1st, 2nd, & 3rd Sundays of the month) where you buy an 80% blank from them, they check you out, then give you the address to a machine shop, in a secret location, where you can rent machine time to finish the lower, then back to their store where a team helps show you how to assemble. No need to buy a jig. Exposed by Channel 10 San Diego: http://www.10news.com/news/investigations/people-line-up-to-legally-make-untraceable-guns

80% AR-15 Lower Receiver (Raw)

$80.00

The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

80% AR-15 Lower Receiver (Anodized)

$90.00

These 80 Percent AR-15 Lower receivers start as 7075-T6 forgings from the lead forge in the US and are fully machined to mil-spec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole. These are anodized with a mil-spec type III hard coat anodizing. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

80% AR-15 Jig

$125.00

The Tactical Machining 80% AR-15 Lower Receiver jig is the highest quality lower receiver jig on the market. Every piece is replaceable on the jig. There are three top plates that are interchangeable to allow you to mill the fire control group. The side plates are fit with a drill bushing to allow you to properly drill the trigger and hammer pin.


VERSION: 2012-11-24

PAGE 12 OF 39

DIY SUPPLIERS LIST 80% AR-10 DPMS .308 (Raw)

$190.00

These .308 Lower receivers are made to fit both the DPMS and SR-25 magazines. The receivers carry some of the highest quality features out there on the market including a tear drop trigger guard machined into the lower, reinforced pivot pin and a generous magazine well to aid in loading.

80% .308 Lower Jig

$150.00

The Tactical Machining 80% .308 Lower Receiver jig is the highest quality lower receiver jig on the market. Every piece is replaceable on the jig. There are three top plates that are interchangeable to allow you to mill the fire control group. The side plates are fit with a drill bushing to allow you to properly drill the trigger and hammer pin.

CNC GUNS http://www.cncguns.com/ Contact: Justin Halford PO Box 43, Salado, AR 72575 mailto:[email protected]

CNC10 10% Lower "Paperweight"

$250.00

The AR-10™ shoots a .308 cal round which is much more powerful than an AR15 .223 round. The AR-10™ is very rare compared to the AR-15, so you can imagine finding the solid model file of the AR-10 would be even more of a challenge, since there are only a few manufactures of .308 cal AR type rifles. I used an Armalite AR-10 receiver to take my measurements from, so the model I made will accept modified M14 mags. M14 mags are much more expensive compared to the FAL mags, but since Armalite uses modified M14 mags in their AR-10's, I thought I'd do the same instead of having to redesign the receiver to accept FAL mags.

416 Clone 11% Lower - GROUP BUY

$380.00

I called them 11% just so they stand out from the standard 80% AR-15 lower. I consider the HK lowers to be 11% left to complete, whereas the 80% lowers are 80% finished. If you look at the following pic, you will noticed they are very similar to a standard AR-15 80% lower...


VERSION: 2012-11-24

PAGE 13 OF 39

DIY SUPPLIERS LIST 10% AR-45 Lower Receivers -Paperweights

$295.00

DISCONTINUED (Listed for reference purposes)

100% AR-45

$412.00

I wanted to stick with a normal AR-15 look and feel. I wanted to be able to drop the mag by pushing the mag release button with same hand I am holding the rifle with while at the same time reaching for another mag. This method would be a lot faster than the AK47 style of mag release. I also didn't want to move the location of the mag release button, since AR-15 users are already familiar with its current location. So I started to work on the solid model design of the receiver and I came up with something I thought would work. I'm going to call this new design the AR45. It will be using an Olympic Arms .45 cal upper receiver.

AR-15 Drilling Jig

$99.95

These new AR-15 lower receiver milling adapters allow you to remove the material from the fire control area in AR type lower receivers. The adapters are sold as sets. One adapter allows you to drill the hole locations and the other adapter allows you to remove the material using your drill press. With these adapters you can remove the material from the fire control pocket as well as the shelf inside the fire control pocket. The adapters have a hard anodized coating that is gray in color (shades of gray may vary). This hard anodize finish give the aluminum adapters very good wear resistance.

AR-15 Milling Adapter Kit

$124.95

The milling adapters can be used to finish AR-15, AR-10™ / DPMS (0.308), and AR45 style lower receivers. They have also been used to successfully complete Kevin's new 80% AR-15 lower receivers. Kevin has made it easier to complete an 80% lower receiver by leaving the fire control area solid, drilling most of the side holes and tapping the buffer tube hole. Visit the tutorial for more details on how to finish Kevin's new 80%'ers. You can get more details about Kevin's 80%'ers further down this page. Also visit the tutorial for details on how to modify your older style AR-15 drilling jig so the adapter kit will work with it.


VERSION: 2012-11-24

PAGE 14 OF 39

DIY SUPPLIERS LIST Trigger Slot Milling Adapter Kit

$

If you want a super easy and error free way of cutting the trigger slot in your lower receiver then you need the trigger slot milling adapter plate. This adapter plate works just like the above milling adapter kit for the fire control pocket. You simply drill through the guided holes, flip the plate around and then use the slot in the plate to guide the included endmill to the exact location. Visit the bottom of this tutorial for more information on how to use this adapter plate. This adapter plate kit isn't absolutely necessary to finish a 80% lower but it will make your life easier.

.308 Drilling Jig

$109.95

DIY GUNS http://www.diyguns.us/ Contact: Kevin 27 Overvale Road, Wolcott, CT 06716

80% AR-15 Lower Receiver (Mil Spec, Alloy 7075-T6)

$150.00

These are sold as is and NO returns for any reason. They are CNC machined from forged Aluminum Mil Spec Alloy 7075-T6. The Magazine opening is BROACHED to Mil Spec dimensions just like the big guys do it. Better surface finsh than wire EDM. It also has a solid fire control area. Other dimensions will fit mil spec parts but may need minor fitting.


VERSION: 2012-11-24

PAGE 15 OF 39

DIY SUPPLIERS LIST DIY HOME BUILT AR-15 LOWER PLANS Mail Order Plans

$25.00

Home built bolt together lower

DSA http://www.dsarms.com/

A2 Upper 0% Forging

$27.95

Anchor-Harvey forgings. A2 Upper Receiver 7075-T6 Alloy Forging, Military Spec. Order 3 or more, $3 discount each

A2 Lower 0% Forging

$25.00

Anchor-Harvey forgings. A2 Lower Receiver 7075-T6 Alloy Forging, Military Spec.


VERSION: 2012-11-24

PAGE 16 OF 39

DIY SUPPLIERS LIST HLF Manufacturing, LLC http://www.shop.hlfmanufacturing.com/ Phone: 888-966-0837

AR-15 80% Lower Reciever

$80.00

5 or more: $75.00 each Item #: 1001 Availability: Out-of-Stock 80% Complete Lower Receiver for the AR-15 Rifle 7075 Aluminum Broached Magazine Well CNC Machined NO FFL REQUIRED!!! Now if you buy a jig from CNC GUNS you will get $10 off one 80% lower receiver! Items to be completed:  Trigger Pin Hole  Hammer Pin Hole  Selector Hole  Fire Control Pocket  Trigger Slot

AR-15 Stripped Upper Reveiver

$80.00

Stripped mil-spec M4 flattop upper receiver. Hard anodized with T-Markings. Mil-Spec Upper Receivers for the AR-15 series firearms. Upper receivers can be shipped directly to your house; no FFL required.


VERSION: 2012-11-24

PAGE 17 OF 39

DIY SUPPLIERS LIST GOONDOG http://www.calguns.net/calgunforum/showthread.php?t=414064

The BLUE Jig

$115.00

The original Blue jig is back. Designed to work on forged, and billet aluminum AR15 80% paper weights. Comes with full color instructions with list of drill bits and end mills needed, all hardware, Right and left side plates, trigger plate, drilling plate, and milling plate. Can be used in a drill press or a mill. Computer designed, and CNC Machined. Manufactured in SoCal

KT ORDINANCE http://www.kristitool.com Kristi Tool & Ordnance c/o postal service address: 382 Adams Lane, Dillon, Montana 59725

KT-10-A Aluminum Frame

$300.00 FRN

The KT-10-A (.308 cal) is a replacement frame for the Armalite AR10TM. In order to complete this frame: Drill selector hole, drill fire control holes (2 req.), mill out fire-control area.

KT-15-A Aluminum Frame

$250.00 FRN

The KT-15-A (.223 cal) is a replacement frame for the Armalite AR15TM. In order to complete this frame: Drill selector hole, drill fire control holes (2 req.), mill out fire-control area.

KT-15-B Aluminum Frame

$250.00 FRN

The Franken-Stone AR Bolt-together KT-15 (.223 cal). In order to complete this frame: Drill selector hole, drill fire control holes (2 req.), mill out fire-control area.


VERSION: 2012-11-24

PAGE 18 OF 39

DIY SUPPLIERS LIST LES BAER CUSTOM http://www.lesbaer.com Ph: (563)289-2126 • Fax: (563)289-2132 Email: [email protected] 1804 Iowa Drive, LeClaire, Iowa 52753

0% Upper Forging

$

These brand new forgings from Les Baer Custom have all the popular features of our complete uppers but without any forward assist. We have had many requests for uppers without the upper assist but with the flattop design, so...here you go. Les Baer Custom comes through again! It's just what you wanted!

0% Lower Forging

$

The same 7075 T-6 aluminum forgings used to make our lower receivers for all Les Baer AR .223 Rifles.

60% Lower Forging

$80.00

New! Les Baer Custom now offers broached lower forgings. It’s a high quality 7075 forging and we have broached in the mag well opening. As a result, the very difficult machining process for this critical opening is already completed. Sold In The White only.


VERSION: 2012-11-24

PAGE 19 OF 39

DIY SUPPLIERS LIST M-16 PARTS.COM http://www.m-16parts.com/ P.O. 607311, Orlando, Florida 32860 Phone: 321-356-8570 or 877-733-4949 mailto:[email protected]

80% Lower Receiver

$85.00

No FFL required and all machine work that has been done is within MilSpec specifications. This is not a second, just not completed to be called a lower receiver, or considered a firearm. This is the AR-15 / M-16 Size. 80% complete No FFL required, these are not lower receivers but are 80% complete until the following are completed. Lowers that are nearly complete and only require: 1. Milling out of the receiver interior, 2. Cutting of the trigger slot, 3. Drilling of the trigger pin hole, 4. Drilling of the hammer pin hole, 5. Drilling of the Selector Hole

80% Jig Set for 80% Lower Receivers

$150.00

AR-15 80% Combination Set

$228.99

AR-15 80% lower receiver Combo Sets include one 80% AR-15 type lower and one AR-15 Jig set. Includes: 80% complete AR-15 type Lower made of 7075 T6 Aluminum that has all machining operations completed except for: 1.Milling out of the receiver interior, 2.Cutting of the trigger slot, 3.Drilling of the trigger pin hole, 4.Drilling of the hammer pin hole Completed areas are finished to Mil-Spec for AR-15 type receivers These include: Buffer tube area complete and threaded, detent pin holes drilled for both front pivot pin and rear takedown pin. Magwell completely finished. Pistol grip area finished with selector detent pin hole drilled, and threaded pistol grip screw hole. Mag Catch and bolt catch area finished. Selector hole finished with markings. Trigger guard holes finished.


VERSION: 2012-11-24

PAGE 20 OF 39

DIY SUPPLIERS LIST 80% lower receiver .308 or 7.62 X 51 type receivers

$195.50

80% lower receiver .308 or 7.62 X 51 type receivers. NOW MADE FROM 7075 T6 Billet Aluminum 80% complete No FFL required, these are not lower receivers but are nearly not completed. Lowers that are nearly complete and only require: 1. Milling out of the receiver interior 2. Cutting of the trigger slot 3. Drilling of the trigger pin hole 4. Drilling of the hammer pin hole 5. Drilling of the Selector Hole

AR-10 80% lower receiver jig set

$180.00

McKAY ENTERPRISES http://store.mckay-ent.com/parts/ar-15-a2-lower-receiver.html

AR-15-A2 Lower Receiver Part #: RM16A2 (100%)

$65.00

RM16A2 lowers from McKay Enterprises features 7075 T6 forgings from Anchor Harvey with a Black Type 3 Hardcoat Anodize finish. Machined to Mil-Spec dimensions using simple markings without Logo. Semi Auto, caliber 5.56 MM. These receivers have received high praise from numerous reviewers (http://www.majorpandemic.com/2012/04/mckay-AR-15-lowerreceiver-review.html)."Just recieved 6 AR lowers that a friend ordered and had shipped to me. As a full time machinist I have to say they are PERFECT! VERY impressed!!"

MOGUN PARTS http://mogunparts.com/index.php/AR-15-0-lower-forging-7075-aluminum.html Contact: Curtis Phone 816-229-0804 mailto:[email protected]

0% Forging

$26.95

Lower receiver forging made from 7075 aluminum is the start of most AR-15 lower receivers. Non-FFL Item. Look here for a PDF set on how to machine the lower forgings http://arlower.ray-vin.com/AR-15 Look here for blue prints for AR-15 parts http://www.firearmfiles.com/ AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 21 OF 39

DIY SUPPLIERS LIST NATIONAL ORDNANCE National Ordnance Corp AR-15 80% Lower

$

? Lots of references to them being a manufacturer of forged lowers but I can’t find any current data found yet.

NODAKSPUD, LLC http://www.nodakspud.com/AR%20Lowers.htm Contact: Mike and Harlan

NDS-601

$

Slick Side –

NDS-XM16E1

$

Partial Fence –

NDS-16A1 Gray

$160.00

Full Fence - The NDS-16A1 "Retro" lower receiver, Ready for you to build that Viet Nam era gun you (or your Dad) carried back in the 60's and early 70's. Material is 7075 T6. The anodizing is done by Victor @ US Anodizing in his "XM" gray. Color on the surplus uppers will vary, but we try to match it as best we can. Status: SOLD OUT, next batch due in late November We are currently machining another batch. We highly recommend you place a backorder if you want one. Don't forget to add an NDS-42 Gray charging handle to your order! (Discounts: 1 $160, 2-5 $155, 6-20 $150) AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 22 OF 39

DIY SUPPLIERS LIST BLEMS

$50.00

*LIMITED TIME OFFER* A1 STYLE LOWER RECEIVER FORGINGS We are cleaning out some old 6061 T6 forgings that were culled out from the very first production run on our die. These were not machined at the time because of small forging flaws on the surface. They were set aside, and after we switched to 7075 for everything we decide to not mix them in with the new stuff. PRICE: $50 EACH LIMIT TWO (2) PER CUSTOMER, NO EXCEPTIONS! THERE ARE CURRENTLY 15 AVAILABLE SHIPPING IS $14 FOR ONE OR $16 FOR TWO THEY ARE SOLD AS IS, NO RETURNS, AND NO WARRANTY FOR DEFECTS Most only have 2-3 dings, but some have more. The location and severity of the forging flaws will vary. There will be NO HAND PICKS.

NDS-603

$

OSI GUNSMITHING TOOLS http://www.savvysurvivor.com/osi_gunsmithing_tools.htm Phone: 541-266-8810 mailto:[email protected]

National Ordnance Corp AR-15 80% Lower

$

Limited time only, 80% lowers from National Ordnance Corp, the same manufacturer that has made lowers for the Tannery Shop. Available in heat treated Aluminum. The Jigs are engineered specifically to work with these lowers. They come unfinished "in the white". No FFL Required. Exportrable. Currently on auction at ebay. Currently out of stock

OSI Super Jig AR Type Drilling Jigs for 80% Finished Lowers

$275.00

"Super" - includes provisions for the pistol grip screw hole and tighter tolerances for pre-fitting the top plane to spec. This is the most popular model.


VERSION: 2012-11-24

PAGE 23 OF 39

DIY SUPPLIERS LIST Export Jig kit for AR

$310.00

"Export" - an improved and beefed up version of the super jig. The Export model is set up for drilling from both sides. This enhances the longevity and service life of the jig to reduce the need for periodic rebuilds which require sending the jig back for replacement of the side and back plates. This is the model sold to NOC and most overseas buyers.

REDMOND BLACK RIFLE (formerly Colfax Tactical) http://www.colfaxtactical.com/ Contact: Larry & Karen Myers 1950 SW BADGER AVE. UNIT 106 REDMOND, OREGON 97756 Phone: 541-548-2715

The AR-15 Non-Anodized 80%Heat Treated 7075-T6 Alloy

$99.00

The Colfax Tactical Non anodized 80% lower is hand finished after machining. There is very little to do after completing the fire control pocket and the three holes in the side of the fire control area. The surface is ready for bead blasting, anodizing , painting, or polishing. All of the parting lines are removed, the trigger area is machined, the front of the mag well is machined smooth, and the curved area under the buffer area is hand smoothed to a beautiful finish.

The AR-15 Black Anodized 80%Heat Treated 7075-T6 Alloy

$109.00

The Colfax Tactical Black Anodized 80% lower is taken a step further than the non anodized in that it is bead blasted and professionally black anodized. The mil spec anodized surface will provide years of service.

Standard Fixture (AR Jig)

$99.00

The Colfax Tactical jig was designed for completing our 80% lowers. We machine our jigs in-house on a CNC vertical machining center insuring absolute accuracy. They will securely hold the lower in place while performing the finish machining. Included with the fixture are the necessary dowel pins and socket head cap screws to hold the fixture together. The jig's hardware is recessed flush with the fixture so that it can be secured in a vise. The jig has drilled and reamed holes to complete the hammer, trigger, and selector holes. AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 24 OF 39

DIY SUPPLIERS LIST 308 Lower (DPMS Platrorm) Heat Treated 7075-T6 Alloy

$169.00

OUR NEW FORGINGS ARE A HEAT TREATED 7075-T6 ALLOY. Colfax tactical is pleased to introduce the forged 80% 308 lower paper weight. After nearly two years in R&D, it’s finally here. We are currently shipping months of backorders from our “interested list”. Once we are caught up, we can satisfy current orders. You are welcome to place your on-line order. We should be able to ship current orders sometime this summer. And of course, we never charge your credit card prior to your 80%’er being ready to ship.

Jig-308

$129.00

The new Colfax Tactical 308 jig is a real departure from the norm. It utilizes a stand off approach rather than relying on entire surface contact. This results in a holding force much greater than that of a standard jig designed for AR15’s.The top plate is adjustable in terms of centering due to variances in forging widths. It is tall enough that the magazine area of the lower does not protrude beneath the jig. A set of dimensions and tips are available to facilitate easier machining. Although we are not recommending that these be used on a drill press, it is possible by those with experience. Additionally, this jig was designed for the Colfax Tactical forged lower. Most likely, it will not work for other manufactured 80%'ers. Included are the hammer, trigger, and selector guide holes.

RGUNS http://www.rguns.net/other.shtml phone: 847-428-3569 847-428-0029 (FAX) 140 North Western Avenue, Route 31, Unit B Carpentersville, Illinois 60110

AR-15 Lower Receiver 0% Forging Paperweight


VERSION: 2012-11-24

$20.00

PAGE 25 OF 39

DIY SUPPLIERS LIST SGT. FREEDOM http://www.savvysurvivor.com/sgtfreedomlowers.htm

Rapid Rifle Castings

$

I had originally though that this was simply a variation of the castings sold by Tannery Shop , however it becomes immediately obvious upon examination that these are neither a copy of or variation on the Tannery shop castings. Nor are they a partially finished Forging of the types sold by a few other vendors. In speaking with some people knowledgeable in metallurgy, they found that the material and probably methods used in the production of the two lowers is definitely different. The "Rapid Rifle" casting having an entirely different weight and texture.

SLICKGUNS.COM http://www.slickguns.com/

AR-15 & AR-10 Lower Reveiver and Jig Combo Set

$228.99

80 Percent complete AR-15 Lower Receiver made from 7075 T6 Aluminum. 80 percent complete AR-10 Lower Receiver made from 6061 billet Aluminum. Jig sets available for both or a combination of the 80% receiver and jig set.

TACTICAL INOVATIONS INC. http://www.tacticalinc.com 345 Sunrise Road Bonners Ferry, ID 83805 Phone: 208-267-1585

AR-15 UPPER RECEIVER FORGING

$27.49

UNRESTRICTED AR15/M16 upper receiver forging is military spec 7075 heat treated T6 alloy and is the basis of our precision machined finished upper receivers. There are NO holes, machine work or any other work done on the forging. These lower receiver forgings are great for the "do it yourselfer" that wants to machine the receiver for a project, for customers that want to stock up for the future or for anyone that wants a cool paperweight. If you have the ability and the time, these make a good project and a fine upper receiver when finished. AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 26 OF 39

DIY SUPPLIERS LIST FREQUENTLY ASKED QUESTIONS: 1. Does the forging come with a machinist drawing? - No drawing is available. 2. If I have questions on how to machine it etc., can I call or email you for assistance? - No machining assistance is available. 3. Is discounted pricing available for quantity purchases? - Yes please contact us for any order over 100. 4. Can you make and sell a forging with some modifications? - No

AR-15 LOWER RECEIVER RAW FORGING

$32.49

UNRESTRICTED AR15/M16 lower receiver forging is military spec 7075 heat treated T6 alloy and is the basis of our T15 precision machined receivers. There are NO holes, machine work, mag well or any other work done on the forging. These lower receiver forgings are great for the "do it yourself-er" that wants to machine the receiver for a project, for customers that want to stock up for the future or for anyone that wants a cool paperweight. If you have the ability and the time, these make a good project and a fine receiver when finished. Although the receiver forging is not federally restricted, should you have questions regarding manufacture, licensing, NFA regulations, individual state regulations etc., please contact ATF or obtain appropriate legal guidance prior to completion.

TACTICAL MACHINING, LLC http://www.tacticalmachining.com Contact: Nathan Krynn 1270 Biscayne Boulevard #4 Deland, FL 32724 Phone: (386)490-4464 mailto:[email protected]

(You will get $25 off for being Calguns member and 20% off the jig.)

They are the Criterion against which all others are judged.

30% AR-15 Lower Receiver (7075-T6 forgings)

$49.00

The only work done to this is the take down hole, the pivot pin hole, the top deck of the receiver and the magazine well. This requires much machining work to become a fully functional AR-15 lower receiver. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.


VERSION: 2012-11-24

PAGE 27 OF 39

DIY SUPPLIERS LIST 80% AR-15 Lower Receiver (7075-T6 forgings)

$80.00

These 80% AR-15 Lower receivers start as 7075-T6 forgings from the lead forge in the US and are fully machined to mil-spec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

80% AR-15 Anodized Lower Receiver (7075-T6 forgings)

$90.00

These 80% AR-15 Lower receivers start as 7075-T6 forgings from the lead forge in the US and are fully machined to mil-spec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole. These are anodized with a mil-spec type III hard coat anodizing. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

(5) 80% AR-15 Lower Receivers (7075-T6 forgings)

$375.00

This is for five of our 80% AR-15 lower receivers. These 80% AR-15 lower receivers start as 7075-T6 forgings from the lead forge in the US and are fully machined to milspec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

80% Single Shot Receiver (7075-T6 forgings)

$105.00

These 80% AR-15 Lower receivers start as 7075-T6 forgings from the lead forge in the US and are fully machined to mil-spec tolerances. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and the safety selector hole and bolt catch if necessary. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.


VERSION: 2012-11-24

PAGE 28 OF 39

DIY SUPPLIERS LIST 80% AR-15 Jig

$125.00

The Tactical Machining 80% AR-15 Lower Receiver jig is the highest quality lower receiver jig on the market. Every piece is replaceable on the jig. There are three top plates that are interchangeable to allow you to mill the fire control group. The side plates are fit with a drill bushing to allow you to properly drill the trigger and hammer pin. Components are available separately.

80% .308 Lower Receiver Raw (7075-T6 forgings)

$190.00

These .308 Lower receivers are made to fit both the DPMS and SR-25 magazines. The receivers carry some of the highest quality features out there on the market including a tear drop trigger guard machined into the lower, reinforced pivot pin and a generous magazine well to aid in loading. Like all of our products we hold them to the tightest tolerances and stand by them for life. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and safety selector. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

80% .308 Lower Receiver Anodized (7075-T6 forgings)

$200.00

These .308 Lower receivers are made to fit both the DPMS and SR-25 magazines. The receivers carry some of the highest quality features out there on the market including a tear drop trigger guard machined into the lower, reinforced pivot pin and a generous magazine well to aid in loading. Like all of our products we hold them to the tightest tolerances and stand by them for life. The operations left to be completed are as follows/ fire control group, trigger pin, hammer pin, trigger slot and safety selector. This is a not an FFL item. This is not a complete receiver and still requires machining to be done. We have a copy of our ATF determination letter and our determination update stating that it is not a firearm.

80% .308 Lower Jig

$150.00

The Tactical Machining 80% .308 Lower Receiver jig is the highest quality lower receiver jig on the market. Every piece is replaceable on the jig. There are three top plates that are interchangeable to allow you to mill the fire control group. The side plates are fit with a drill bushing to allow you to properly drill the trigger and hammer pin.


VERSION: 2012-11-24

PAGE 29 OF 39

DIY SUPPLIERS LIST TANNERY SHOP http://ww2.tanneryshop.com/ Contact: William mailto:[email protected]

BRONZIE

$40.00

They used to sell AR lowers but now their web site is just a bunch of links. Just listed here for reference purposes only.

UT ARMS http://www.utarms.com Contact: Chris 3003 Power Drive Kansas City, Kansas 66106 Phone: 855-488-2767

UT ARMS AR-15 80% Lower

$160.00

Recently available on GunBroker for $115

VADER SPADE http://www.calguns.net/calgunforum/showthread.php?t=588094 Contact: Randy Spade 30060 Butcher Lane Whitmore, California Phone: 530-472-1174 mailto:[email protected] Photos: http://www.facebook.com/media/set/?set=a.107254766103392.15415.100004566074630&type=3[/url] Tutorials: http://www.ar15.com/forums/t_3_4/484783_Vader_Spade_s_80_Millingand_Anodizing.html


VERSION: 2012-11-24

PAGE 30 OF 39

DIY SUPPLIERS LIST TM 80% Receivers (engraved)

$105.00

$105.00 for an 80% AR-15 lower with a custom engraving in area #1 or Area #4 and custom selector engraving on one side. Extra engravings are $5.00$10.00 each area. Shipping is $10.00 for any number of lowers. Sales tax is included, but I'll need to bump up my prices at some point. What I didn't count on is spending 3-4 hours a day on e-mails. I'm hoping a web page with a FAQ's page will cut back on the e-mails.

Custom Engraving

POR

Type II Anodizing in Black


$30.00

VERSION: 2012-11-24

PAGE 31 OF 39

DIY SUPPLIERS LIST WINE COUNTRY WEAPONS

(Warning: different prices on each web site)

http://winecountryweapons.webs.com -orhttp://winecountryweaponsAR-15.webs.com (higher prices) Contact: John McLarty Santa Rosa, CA

AR-15 80% lower in white (CNC milled, from 7075 forging)

$80.00/$95.00

This is the finest, most complete 80% lower in the market today. Built by state of the art CNC milling machines, from 7075 forgings these are the strongest you can buy.This is a non FFL item. This is not a complete receiver and still requires machining to be done. This not a firearm. The operations left to be completed are as follows: fire control group, trigger pin, hammer pin, trigger slot and safety selector.

AR-15 80% Hard Coat Anodized Lower

$90.00/$125.00

7075 Forging 80% lower receiver. Requires machining out the trigger pocket and drilling the safety selector, trigger & hammer pin holes. These start as a true 7075 forging from the leading forge in the USA for the strongest lower you can buy. The contour is fully machined on a brand new cnc machining center, leaving no flash. The magazine well is cut on a high end precision broaching machine. This is not a firearm as defined by the BATFE and does not require an FFL to purchase. Although there is a shopping cart it is inactive due to Term's of service as it relates to the products offered. All Order will need to be by a mailed Money Order.

AR-15 .223 Drill / Mill Jig

$120.00

The Wine Country Weapons 80% AR-15 Lower Receiver jig is the highest quality lower receiver jig on the market. This Jig is made in California just like our world class wines. Every piece is replaceable on the jig if you make a mistake. There are three top plates that are interchangeable to allow you to mill the fire control group pocket. The side plates allow you to properly drill the selector hole, trigger and hammer pins. This jig will work with all 80% lowers in the market today, both forged & billet Complete with step by step instructions. FREE SHIPPING

The Blue Jig AR-15 .223 Drill / Mill jig (Listed as New Item)

$135.00

The Wine Country Weapons 80% AR-15 Lower Receiver jig is the highest quality lower receiver jig on the market. This Jig is made in California just like our world class wines. Every piece is replaceable on the jig if you make a mistake. There are three top plates that are interchangeable to allow you to mill the fire control group pocket. The side plates allow you to properly drill the selector hole, trigger and hammer pins. This jig will work with all 80% lowers in the market today, both forged & billet. Jig Style may vary due to avalibility. Although there is a shopping cart it is inactive due to Term's of service as it relates to the products offered. All Order will need to be by a mailed Money Order. AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 32 OF 39

DIY SUPPLIERS LIST AR-10 Style 308 80% Lower

225.00

These .308 Lower receivers are made to fit both the DPMS and SR-25 magazines.DPMS upper receivers style fit perfect. The receivers carry some of the highest quality features out there on the market including a teardrop trigger guard machined into the lower, reinforced pivot pin and a generous magazine well to aid in loading. This is a not an FFL item. This is a 80%receiver and still requires machining to be done. The operations left to be completed are : fire control group, trigger pin, hammer pin, trigger slot and safety selector. For AR-10 type rifles. These are made from 7075 Billet. Add $25 for International Shipping (No 308 jigs listed)


VERSION: 2012-11-24

PAGE 33 OF 39

DIY SUPPLIERS LIST

LOWER RECEIVER MANUFACTURING Tutorials 1. CNC Gunsmithing –Quick Start Guide: http://www.cncguns.com/downloads/AR15/Quick%20Start%20Guide%20rev%2009-11-12.pdf

2. CNC Gunsmithing - Original style with fire control pocket milled: http://www.cncguns.com/projects/ar15lower80tutorial-1.html

3. CNC Gunsmithing – Newer style with fire control pocket solid: http://www.cncguns.com/projects/ar15lower80tutorial-2.html

4. Gunsmithing Work - Machining An AR-15 Lower Receiver: http://www.shell-central.com/AR_Lower1.html

5. Homebuilt - HPDE AR15 Lower: http://230grain.com/showthread.php?31611-Homebuilt-HPDE-AR15-Lower

6. Ray Brandes - Machining the AR15 Lower Receiver Forging http://www.lecreg.com/P4x4/ARblank.pdf

7. UT Arms - 80% Lower Completion on the Mini Mill: http://apex-brass.com/media/downloadable/AR-15-80-Tutorial-Mill.pdf

8. UT Arms 80% Billet Lower Completion on a Drill Press http://apex-brass.com/media/downloadable/AR-15-80-Tutorial-Drill-Press.pdf

9. Vader Spade – Lower Machining Tutorial http://www.calguns.net/calgunforum/showthread.php?t=271990&highlight=80%25+tutorial

10.

Anodizing Aluminum by Ron Newman http://www.focuser.com/anodize.html

11.

How I Anodize Aluminum by ratyoke http://www.lockpicking101.com/viewtopic.php?t=37925

12.

Smart Flix Video Rentals - Anodizing Aluminum for Fun and Profit http://smartflix.com/store/video/4756/Anodizing-Aluminum-for-Fun-and-Profit

13.

Smart Flix Video Rentals - Building the AR-15 http://smartflix.com/store/video/4/Building-the-AR15

14.

Smart Flix Video Rentals - AR-15 Armorer Course http://smartflix.com/store/video/273/AR15-Armorer-Course


VERSION: 2012-11-24

PAGE 34 OF 39


Smart Flix Video Rentals - Building an AR-15 from a 0% Forging http://smartflix.com/store/video/673/Building-an-AR15-from-a-0-Forging


VERSION: 2012-11-24

PAGE 35 OF 39

DIY SUPPLIERS LIST

LEGAL INFORMATION FROM THE ATF:

1. Is it legal to assemble a firearm from commercially available parts kits? For your information, per provisions of the Gun Control Act (GCA) of 1968, 18 U.S.C. Chapter 44, an unlicensed individual may make a “firearm” as defined in the GCAfor his own personal use, but not for sale or distribution. The GCA, 18 U.S.C. § 921(a)(3), defines the term “firearm” to include the following: … (A) any weapon (including a starter gun) which will or is designed to or may be readily converted to expel a projectile by the action of an explosive: (B) the frame or receiver of any such weapon; (C) any firearm muffler or silencer; or (D) any destructive device. Such term does not include an antique firearm. In addition, the National Firearms Act (NFA), 26 U.S.C. § 5845(b), defines the term “machinegun” as: … any weapon which shoots, is designed to shoot, or can be readily restored to shoot, automatically more than one shot, without manual reloading, by a single function of the trigger. This term shall also include the frame or receiver of any such weapon, any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a machinegun, and any combination of parts from which a machinegun can be assembled if such parts are in the possession or under the control of a person. Finally, the GCA, 18 U.S.C. § 922(r), specifically states the following: It shall be unlawful for any person to assemble from imported parts any semiautomatic rifle or any shotgun which is identical to any rifle or shotgun prohibited from importation under the…[GCA]…Section 925(d)(3).as not being particularly suitable for or readily adaptable to sporting purposes …. Also, 27 C.F.R. § 478.39 states: … 1.

(a) No person shall assemble a semiautomatic rifle or any shotgun using more than 10 of the imported parts listed in paragraph (c) of this section if the assembled firearm is prohibited from importation under section 925(d)(3) as not being particularly suitable for or readily adaptable to sporting purposes ….

2.

(b) The provisions of this section shall not apply to:


VERSION: 2012-11-24

PAGE 36 OF 39


(1) The assembly of such rifle or shotgun for sale or distribution by a licensed manufacturer to the United States or any department or agency thereof or to any State or any department, agency, or political subdivision thereof; or (2) The assembly of such rifle or shotgun for the purposes of testing or experimentation authorized by the Director under the provisions of [§478.151(formerly 178.151)]; or (3) The repair of any rifle or shotgun which had been imported into or assembled in the United States prior to November 30, 1990, or the replacement of any part of such firearm.

3.

(c) For purposes of this section, the term imported parts [tabulated below] are: 1.

(1) Frames, receivers, receiver castings, forgings, or castings.

2.

(2) Barrels.

3.

(3) Barrel extensions.

4.

(4) Mounting blocks (trunnions).

5.

(5) Muzzle attachments.

6.

(6) Bolts.

7.

(7) Bolt carriers.

8.

(8) Operating rods.

9.

(9) Gas pistons.

10. (10) Trigger housings. 11. (11) Triggers. 12. (12) Hammers. 13. (13) Sears. 14. (14) Disconnectors. 15. (15) Buttstocks. 16. (16) Pistol grips. 17. (17) Forearms, handguards. 18. (18) Magazine bodies. 19. (19) Followers. 20. (20) Floor plates. … As a result of a 1989 study by the U.S. Treasury Department regarding the importability of certain firearms, an import ban was placed on military-style firearms. This ban included not only military-type firearms, but also extended to firearms with certain features that were considered to be “nonsporting.” Among such nonsporting features were the ability to accept a detachable magazine; folding/telescoping stocks; separate pistol grips; and the ability to accept a bayonet, flash suppressors, bipods, grenade launchers, and night sights. AUTHOR: GARY SALISBURY

VERSION: 2012-11-24

PAGE 37 OF 39

DIY SUPPLIERS LIST Please note that the foreign parts kits that are sold through commercial means are usually cut up machineguns, such as Russian AK-47 types, British Sten types, etc. Generally, an acceptable semiautomatic copy of a machinegun is one that has been significantly redesigned. The receiver must be incapable of accepting the original fire-control components that are designed to permit full automatic fire. The method of operation should employ a closed-bolt firing design that incorporates an inertia-type firing pin within the bolt assembly. Further, an acceptably redesigned semiautomatic copy of nonsporting firearm must be limited to using less than 10 of the imported parts listed in 27 CFR § 478.39(c). Otherwise, it is considered to be assembled into a nonsporting configuration per the provisions of 18 U.S.C. 925(d)(3) and is thus a violation of § 922(r). Individuals manufacturing sporting-type firearms for their own use need not hold Federal Firearms Licenses (FFLs). However, we suggest that the manufacturer at least identify the firearm with a serial number as a safeguard in the event that the firearm is lost or stolen. Also, the firearm should be identified as required in 27 CFR478.92 if it is sold or otherwise lawfully transferred in the future.

2. Does the GCA prohibit anyone from making a handgun, shotgun or rifle? With certain exceptions a firearm may be made by a non-licensee provided it is not for sale and the maker is not prohibited from possessing firearms. However, a person is prohibited from assembling a non-sporting semiautomatic rifle or non-sporting shotgun from imported parts. In addition, the making of an NFA firearm requires a tax payment and approval by ATF. An application to make a machine gun will not be approved unless documentation is submitted showing that the firearm is being made for a Federal or State agency. [18 U.S.C. 922(o) and (r), 26 U.S.C. 5822, 27 CFR 478.39, 479.62 and 479.105]


VERSION: 2012-11-24

PAGE 38 OF 39

DIY SUPPLIERS LIST PROTECT YOUR 2ND AMENDMENT RIGHTS

"A well-regulated Militia being necessary to the security of a free State, the right of the people to keep and bear Arms shall not be infringed."

Don’t let those who DieD protecting those rights, have DieD in vain……

Protect Your 2nd Amendment Rights


VERSION: 2012-11-24

PAGE 39 OF 39

DIY Suppliers List

Recommend Documents