DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat http://usuaris.tinet.cat/sje/ /sje/cnc/laser_eng cnc/laser_eng.ht .htm m
Yag laser l aser marking m arking ULSInc.com/Yag+laser+marking/
Laser Marking for Your Business Industrial Solutions!
DiY. How to build a homemade Router Laser CNC. In this page I will show you how I have build a Router La ser CNC using some part from old printers, a Epson Stylus Stylus 800 and another Epson Stylus Color Color II, (you can use your old printer). Aplications: Cutting Paper. To make stencils for painting with airbrush. Wood Wood and Cardboard Ca rdboard Engraving. Engraving. Write and paint in wood whitout ink. Plastic Engraving. To To write in plastic without special inks. Plastic Cutting. To obtains the parts you need to build the prototipes of your inventions. Printed Circuit Boards Engraving. We can start obt aining the X axis from the old printer. We will will use the guide, the stepper and the bridge. We We will mount the laser diode in the place of the ink cartridges. We will not use the other parts, pa rts, as control board, we nee d change it by another CNC control board with stepper drivers. I have mounted it in a wood base.
General view of the device.
1 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
Transmission system for Y axis.
The first protortipe for the new CNC control board that controls 2 stepper motors and the power for the Laser Diode.
2 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
In this video you can see a wood engraving test using the software EMC2 in Ubuntu 8.04.
As I need refocus the laser each time I change the width of the material to engraing y have build Z axis for the Laser Diode, that let me change the focus high from the CNC software. To build this new Z axis, I have used a CD Laser Head, where i have add my engraving laser, and changed the motor by a stepper. Focus demonstration video by Z axis.
3 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
Here you can see the Z axis with the Laser Diode mounted un the bridge of an Epson Stylus Color II.
The guides of Y axis, 20 mm diámeter, in a wood base of 10 mm width, for the Stylus Color II bridge.
4 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
The guides with the X axis support ( bridge ).
Y Axis working using an stepper and a timing beld from and old HP printer.
5 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
X and Z axis mounted over Y axis, and new driver boards.
El conjunto provisional, a la espera de una nueva correa de transmisión más larga que permita aprovechar el recorrido de las guías, y de un nuevo motor que permita una mayor resolución y suavidad de movimiento.
6 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
Demonstation video working 3 Axis and and Laser Diode.
In the next picture, you can see the same router with 1W laser diode, a new wood table, a new stepper motor for Y axis with new beld for a more soft and accurate movement.
7 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
Some related CNC books in Amazon.
CNC Programming Principles and Appli... Mike Mattson Best Price $45.11 or Buy New $108.25
CNC Robotics Geoff Williams Best Price $10.64 or Buy New $22.02
CNC Programming Handbook, Third Edit.. . Peter Smid Best Price $33.85 or Buy New $52.95
Machining And CNC Technology Student... Michael Fitzpatric... Best Price $110.00 or Buy New
Manufacturing Automation Yusuf Altintas Best Price $55.00 or Buy New
Privacy Information
Privacy Information
Privacy Information
Privacy Information
Privacy Information
Links. LinuxCNC.org. Home of user of the Enhanced Machine Controller - EMC. Chris Radek's stuff. True Type Tracer, AutoCAD G-Code export, I mage to G-Code, and more. PyCAM. Toolpath generation for 3-axis CNC machining. Import STL files and export GCode. DXF2GCODE. Translated version of website DXF2GCODE. G-Simple. Freeware CAM for 3 Axis Machining Centers under Windows, but that can run on Wine. NCSim. Yet another (free) CNC 3-axis simulator. CncSimulator. The free professional simulator ofr CNC code.
CNC USB Controller www.planet-cnc.com
Powerful, easy to use, affordable. For Hobbyists and Professionals!
8 of 9
15.10.2013 19:33
DiY. Homemade Router Laser CNC.
http://usuaris.tinet.cat/sje/cnc/laser_eng.htm
ElectroMagnetic Applications.
9 of 9
15.10.2013 19:33
