Siemens PLM Software
NX CAM 9.0.3: Divide cut region using a line Specifying the orientation of the sectioning plane when dividing cut regions in Area Milling operations.
Answers for industry.
About NX CAM NXTM CAM software has helped many of the world’s leading manufacturers and job shops produce better parts faster. You can also achieve similar benefits by making use of the unique advantages NX CAM offers. This is one of many hands-on demonstrations designed to introduce you to the powerful capabilities in NX CAM 9.0.3. In order to run this demonstration, you will need access to NX CAM 9.0.3. Visit the NX Manufacturing Forum to learn more, ask questions, and share comments about NX CAM.
2
Hands-on Demonstration: Divide cut region using a line You can now specify the orientation of the plane along which the divide line projects when dividing a cut region in Area Milling operations. This gives you more control over dividing the cut region.
Preview allows you to see the regions before completing the division.
3
Prerequisites: 1. You will need access to NX 9.0.3 in order to run this demonstration. 2. If you haven’t done so already, download and unzip divide_cut_region_using_a_line.7z.
Demo: 1. Open divide_cut_region.prt in NX.
2. In the Program Order View of the Operation Navigator, double-click CONTOUR_AREA to edit the operation. 3. In the Geometry section of the dialog box, click Cut Regions 4. Select CONTOUR_AREA_R_2 in the Operation Regions list.
.
5. Click Divide.
6. Select the approximate points indicated below on the edges of the non-steep cut region as the start and end points of the divide line (use Point on Curve
to make selection easier).
4
7. Be sure Tool Axis is selected from the Divide Plane list.
8. In the Preview section of the dialog box, click Display . The sectioning plane (illustrated here, but not displayed in the graphics window) is created through the divide line and parallel to the tool axis. This is the same behavior as in NX9.0.2. This option is useful for dividing non-steep regions.
9. Click OK in the Divide Region dialog box. 10. Select CONTOUR_AREA_R_2_1 first and then CONTOUR_AREA_R_2_2 in the Operation Regions list to see that the cut region has been divided.
5
Next, you will define the sectioning plane normal to the tool axis. This can be useful for dividing steep regions. 11. Click Undo to combine the regions. 12. Select CONTOUR_AREA_R_1 in the Operation Regions list. 13. Click Divide . 14. Select the approximate points indicated below on the edges of the steep cut region.
11. With Tool Axis still selected in the Divide Plane list, click Display . Notice how Divide Plane (the only method available in NX9.0.2) does not divide the region cleanly and in this case is not appropriate for a steep cut region.
12. Select Normal to Tool Axis from the Divide Plane list. This option is new.
In the Preview section of the dialog box, click Display
. 6
The sectioning plane (illustrated here, but not displayed in the graphics window) is created through the divide line and normal to the tool axis.
13. Click OK in the Divide Region dialog box. 14. Select CONTOUR_AREA_R_1_1 first and then CONTOUR_AREA_R_1_2 in the Operation Regions list to see that the cut region has been divided.
15. Click Undo
to combine the regions.
Lastly, you will define the sectioning plane by specifying an angle relative to the tool axis. This is the most flexible method and is useful in cases where Tool Axis and Normal to Tool Axis do not give satisfactory results. 16. Select CONTOUR_AREA_R_1 in the Operation Regions list. 17. Click Divide . 18. Select the approximate points indicated below on edges of the steep cut region.
7
15. Select Dynamic from the Divide Plane list. This option is new.
16. Drag the handle or type a value in the Angle from Tool Axis box.
17. In the Preview section of the dialog box, click Display . The sectioning plane (illustrated here, but not displayed in the graphics window) is created through the divide line at the specified angle relative to the tool axis. The sectioning plane rotates about the divide line. The divide line may not be parallel to the tool axis.
18. Click OK in the Divide Region dialog box. 8
19. Select CONTOUR_AREA_R_1_1 first and then CONTOUR_AREA_R_1_2 in the Operation Regions list to see that the cut region has been divided.
19. Click OK in the Cut Regions dialog box. 20. Click OK to complete the operation. 21. Close the part file without saving.
9
Siemens Industry Software Headquarters Granite Park One 5800 Granite Parkway Suite 600 Plano, TX 75024 USA +1 972 987 3000 Americas Granite Park One 5800 Granite Parkway Suite 600 Plano, TX 75024 USA +1 314 264 8499 Europe Stephenson House Sir William Siemens Square Frimley, Camberley Surrey, GU16 8QD +44 (0) 1276 413200 Asia-Pacific Suites 4301-4302, 43/F AIA Kowloon Tower, Landmark East 100 How Ming Street Kwun Tong, Kowloon Hong Kong +852 2230 3308
About Siemens PLM Software Siemens PLM Software, a business unit of the Siemens Industry Automation Division, is a leading global provider of product lifecycle management (PLM) software and services with seven million licensed seats and more than 71,000 customers worldwide. Headquartered in Plano, Texas, Siemens PLM Software works collaboratively with companies to deliver open solutions that help them turn more ideas into successful products. For more information on Siemens PLM Software products and services, visit www.siemens.com/plm.
© 2014 Siemens Product Lifecycle Management Software Inc. Siemens and the Siemens logo are registered trademarks of Siemens AG. D-Cubed, Femap, Geolus, GO PLM, I-deas, Insight, JT, NX, Parasolid, Solid Edge, Teamcenter, Tecnomatix and Velocity Series are trademarks or registered trademarks of Siemens Product Lifecycle Management Software Inc. or its subsidiaries in the United States and in other countries. All other logos, trademarks, registered trademarks or service marks used herein are the property of their respective holders. 11/14
www.siemens.com/plm/nxmanufacturingforum
10
