The diversity technique in GSM involves time diversity, frequency diversity, and space diversity. In the case of space diversity, multiple antennas are used at the receiver to receive uncorrelated...
Huawei Antenna Diversity configuration
2-Antenna Receive Diversity
Full description
Full description
pembahasan matateri kepemimpinan dalam bisnisFull description
take and receive, offertory song,
Module Receive and Respond
rpg
A Cappella From the album "Blessed Be God" featuring 9 choral arrangements of popular religious songsFull description
Communication ProcessFull description
take and receive, offertory song,
Diversity receive alarm Window view alarm -
Right click on browser alarm for more information => Filter alarm => Alarm source type => Site and find site name in list book and OK.
Problem on BSC -
Right click on card name that has alarm => View Site Board => Configure Site Board Attributes.
Mistake problem
Note: In Feeder parameter, Send Receive Mode has many value as Double Feeder and Single Feeder. In configuration 2TRX has to set up value of Feeder Double Feeder (2TX + 2RX), 3TRX Set up Feeder Single Feeder (1TX + 2RX) this action use for card DRFU.
Phoeung Sarim
Page 1
Clear Problem on BSC -
Right click on site name at right panel => Configure Site Board Attributes
-
Click on button Configure Site Board Attributes
-
Right click on card name => Configure RXU Attributes
Phoeung Sarim
Page 2
-
Choose tab Configure Site Board Attributes and Select on Value Single Feeder (1TX + 2RX). OK => OK => Finish. Note: If site config 2TRX in this value select Double Feeder (2TX + 2RX) and 3TRX select single Feeder (1TX + 2RX).
