"A work could turn out to be modern only when it is 1st postmodern. Postmodernism thus understood ju
Business Communication - Letter writing and memos
s
Presentation that tries to bring clarity to the distinction between HACCP and GMP
project on summon and warrant
difference ahuFull description
International Relations
Western astrologers follow a system of presenting the planets as they are in the sky, which is known as sayana system. Hindu astrologers follow Nirayana system wherein the shift of the earth…Full description
communication formal vs informal
This article deals with the differences of prayer among Muslim women and men. It will clear all the misunderstandings have among the Muslim.
Descripción: difference
Full description
Void, Voidable and Valid Contract
Full description
1) OWS MEPC 60(33):- for ships built on or after 30April 1994 ; OWS MEPC 107(49) for ships built on or after 1 JAN 2005 2) OWS MEPC 60(33):- supercedes the recommendations contained in reso A.393(X) OWS MEPC 107(49):- supercedes the recommendations contained in reso MEPC.60(33) 3) OWS MEPC 60(33):- The filtering equipment is gravitational which is not effective over the complete range of oils which might be carried onboard ship, nor it can deal with oil of very high relative density or with a mixture presented to it as an emulsion...thus emulsion... thus a lot of processing needs to be done before the t he sending the bilge to OWS. OWS MEPC 107(49):- The 15ppm bilge separator is capable of handling any oily mixtures from the machinery space bilges and is i s effective over the complete range of oils which might be carried carried onboard ship and can deal satisfactorily with with oil of very high density and mixture presented to it as an emulsion. 4) OWS MEPC 60(33):- Recirculating facilities provided to enable the oil filtering equipment to be tested with the overboard discharge closed at initial and periodic surveys OWS MEPC MEPC 107(49):107(49):- Re-circulating Re-circulating facilities facilities provided , after and and adjacent adjacent to the overboard oulet of the stopping device to enable the 15 ppm bilge separator system including the 15ppm bilge alarm system and the automatic stopping device , to be tested with the overboard discharge closed. 5) OWS MEPC 60(33):60(33):- response time of of the oil content meter meter (i.e the time that elapses between an alteration in the sample being supplied to the meter and the meter showing the correct response ) not to exceed 20 seconds OWS MEPC 107(49): 107(49):-- not to exceed 5 seconds 6) OWS MEPC 60(33):60(33):- no mention about training training of ship staff wrt familiarisation familiarisation in operation and maintenance of the equipment OWS MEPC 107(49):- requires training 7) OWS MEPC 60(33):60(33):- the layout of the shipboard installation installation to be arranged so that the overall response time between an alteration in the mixture being pumped and the alteration in the meter reading reading should be as short as possible and in any case not more than 40 secs to allow for remedial action being taken before the oil content of the mixture being discharged exceeds the permissible limit. OWS MEPC 107(49):- the layout of the shipboard installation to be arranged so that the overall response time (including the response time of 15ppm Bilge alarm) between an effluent discharge from the 15ppm Bilge separator exceeding 15ppm and the
operation of the automatic stopping device preventing overboard discharge ,should be as short as possible and in any case not more than 20secs. 8) OWS MEPC 60(33):- it is recommended that a simple means be provided aboard ship
to check on instrument drift and to confirm the accuracy and repeatability of the instrument reading OWS MEPC 107(49):- it is recommended that a simple means be provided aboard ship to check on instrument drift , repeatability of the instrument reading and the ability to re-zero the instrument
9) OWS MEPC 107(49):- The routine maintenance of the 15ppm Bilge Separator and the 15 ppm Bilge alarm system should be clearly defined by the manufacturer in the associated Operating and maintenance manuals.
10) OWS MEPC 107(49):- The accuracy of the 15ppm Bilge alarms should be checked at the IOPP certificate renewal surveys according to manufacturers instructions . Alternatively the unit may be replaced by a calibrated 15ppm Bilge Alarm .
