Difference Between Damped and Undamped Vibration

10/2/2016

Di ffer ence Betw een Dam ped and U ndam ped Vi br ati on

Difference Between Damped and Undamped Vibration October 28, 2015by Nipun5 min read

9

Main Difference – Damped vs. Undamped Vibration Damped and undamped vibration refer to two different types of vibrations. The main difference between damped and undamped vibration is that undamped vibration refer to vibrations where energy of the vibrating object does not get dissipated to surroundings over time, whereas damped vibration refers to vibrations where the vibrating o bject loses its loses its energy to the surroundings.

What is Undamped Vibration In undamped vibrations, no resistive force acts on the vibrating object. As the object oscillates, the energy in the object is continuously transformed from kinetic energy to potential energy and back again, and the sum of kinetic and potential energy energy remains a constant value. In practice, it’s extremely difficult to find undamped vibrations. For instance, even an object vibrating in air would lose energy over time due to air resistance. Let us consider an object undergoing simple harmonic motion. Here, the objet experiences a restoring force towards the equillibrium point, and the size of this force is proportional to displacement. If the displacement displacement of the object is given by , then for an an object with mass

in simple harmonic motion, we can write:

This is a differential equation. A solution to this equation can be written in the form:: form

Here,

If vibration is undamped, the object continues to oscillate sinusoidally.

What is Damped Vibration In damped vibrations, external resistive forces act on the vibrating object. The object loses energy due to resistance and as a result, the amplitude of vibrations decreases exponentially. http://pedi aa.com /di ffer ence- between- dam ped- and- undam ped- vibr ati on/

1/4

10/2/2016

Difference Between Damped and Undamped Vibration

We can model the damping force to be directly proportional to the speed of the object at the time. If the constant of proportionality for the damping force is

,

then we can write:

The solution to this differential equation can be given in the form: .

Here, the

.

We can write this as:

.

Writing the equation in this form is useful because the quantity

can be used

to determine the nature of a particular oscillation. Often, this quantity is called the damping coefficient ,

If

, i.e.

.

, then we have critical damping. Under this condition, the oscillating

object returns to its equilibrium position as soon as possible without completing any more oscillations. When

, we have underdamping . In this case, the

object continues to oscillate, but with an ever-reducing amplitude. For

the

resistive forces are very strong. The object would not oscillate again, but the object is slowed down so much, that it goes towards the equilibrium much more slowly compared to an object that is critically damped. Overdamping is the name given to this type of scenario. When

, there is no resistive force and the object

is undamped . Theoretically, the object continues to carry out simple harmonic motion without any reduction in amplitude. The graph below illustrates how the displacement of the object changes under these three different conditions:

http://pediaa.com/difference-between-damped-and-undamped-vibration/

2/4

10/2/2016


Damping under resistive forces with different damping constants We can make use of damping in situations where we do not want something to vibrate. Cars consist of dampers that prevent the car from bobbing up and down repeatedly every time it falls into a pothole. Dampers are also found on bridges to prevent them from swaying due to wind. Tall buildings also sometimes have dampers to ensure that the building does not sway too much and topple during earthquakes. On power lines, “Stockbridge dampers” are used to ensure that the cables do not undergo large vibrations.

Stockbridge dampers on a power line


3/4

10/2/2016


Difference Between Damped and Undamped Vibration Presence of Resistive Forces In undamped vibrations, the object oscillates freely without any resistive force acting against its motion. In damped vibrations, the object experiences resistive forces.

Energy Loss In undamped vibrations, the sum of kinetic and potential energies always gives the total energy of the oscillating object, and the value of its total energy does not change. In damped vibrations, the total energy of the oscillating object decreases over time. This energy is dissipated as the object does work against the resistive forces.

Value of the Damping Coefficient For undamped vibrations, For damped vibrations,

. .

Image Courtesy: “Stockbridge dampers on a 400 KV line near Castle Combe, England.” by Adrian Pingstone (Own work) [Public Domain], via Wikimedia Commons (Modified)


4/4

Difference Between Damped and Undamped Vibration

Recommend Documents