CFD ANALYSIS OF HEAT TRANSFER IN A HELICAL COIL HEAT EXCHANGER USING FLUENTFull description
Process Design of Heat Exchanger
Improve Heat exchanger designFull description
Deskripsi lengkap
Design a shell and tube heat exchanger to be used in cooling kerosene using light crude oil. Assume the working pressure for kerosene to be 5 bars and light crude oil to be 6.5 bars. Also, assume f...
fabricationFull description
This report explains the use of exhaust gases through heat exchanger, the heat of exhaust gases might be used in heating an alternative fuel. the alternative fuel taken is bio-diesel, which have hi...
Maintenance of Heat Exchanger
Plate fin heat exchangers, because of their compactness, low weight and high effectiveness are widely used in aerospace and cryogenic applications. This device is made of a stack of corrug…Full description
Process engineering guide
Process engineering guide
Double pipe heat exchangerFull description
Design and Fabrication of Helical Coil Heat Exchanger. (HCHE)
Under the guidance of Mr.S.Senthilkumar Assistant Professor Profess or (Sr.Gr)
By N.Prabakaran V. Sakthi vel J.Parthasarathy S.Sundar
Scope:
By designing and fabrication of helical coil heat exchanger we can study the performance characteristics of heat exchanger. By increasing the surface area we can improve the heat transfer rate and also improving the life of heat exchanger.
29 March 2014
Material Selection & Design Data
Shell- Outer Coils(Helical)-Made of Copper.
Design Data:
◦
Outer dia of shell -
◦
Outer Dia of Pipe -
◦
Pitch(p)
-
Design Procedure
29 March 2014
29 March 2014
CAD MODEL: HEAT EXCHANGER Shell(MS)
Helical Coil(Copper)
29 March 2014
Application
Chemical plant. Power plant. Refrigeration and air conditioning plant.
