Te Technica ical Specific ifica ation tion 9-6040-B 2012-09-25
Sandvik DD210-V Underground Drill Rig
Sandvik DD210-V is a compact and versatile single boom electro hydraulic jumbo for development, bolting and/or production in narrow vein mining. The unique muti-purpose boom has a large optimum shaped coverage.
Coverage Boom Feed Rock drill Hole diameter Hole length Control system Cornering Weight
A double rotation device allows a vertical positioning on both side and the possibility to drill extremely close to the hanging and foot walls, both to the right and left. The jumbo layout is designed for good visibility and balance, this and the powerful four-wheel-drive articulated carrier ensure fast and safe manoeuvering in small drifts. The high performance drilling system allows high drilling performance with good drill steel economy and high machine reliability. The operator environment and added automatic functions allow the operator to concentrate on safe, fast and accurate drilling. All the service points are well protected but easy to access.
1/4
27 m² B14NV NVTF 8/12 HL510 43-51mm Up to 4 090 mm IBCQN V 2 600mm 8 650kg
n o i t c u r t s n o C d n a g n i n i M k i v d n a S 1 1 0 2 ©
Technical Specification
Sandvik DD210-V
9-6040-B 2012-09-25
Coverage area 1650 5500
ROOF DRILLING
FACE DRILLING
4750
SIDE WALL DRILLING
800
4250 5200
5500
LONG HOLE DRILLING
Hydraulic rock drill Rock drill *Rock drill *Rock drill Percussion power Percussion pressure Percussion rate Rotation speed Rotation torque Hole size (drifting) Hole size (reaming) Recommended rod Shank adapter Weight Length Profile height Shank lubrication device Shank lubrication compressor Air consumption Oil consumption
Feed
Technical Specification 2-1150
HL510 HLX5 (TF feed only) H200 (NVTF only) 16 kW Max. 175 bar 59 Hz Max. 250 rpm (with O MS80) Max. 400 Nm (with OMS80) 43 - 51 mm 76 -127 mm H35-R32 R39-R35 T38, R32 130 kg 1 024 mm 76 mm Air/oil mist, KVL10-1 Piston type 0,8m3/min (4 bar) 250-350 l/min 180-250 g/h
Boom Boom Parallel coverage Parallelism Boom extension Boom weight, net Roll-over angle Bolt hole drilling
Sandvik DD210-V on jacks. All dimensions in mm.
1470
Technical Specification3-1350
Feed type Feed force Feed extension *TF feed lengths *Telescopic feed
Feed TF500 TF500-8’ TF500-10’ TF500-12’ NVT6/10 NVT8/12
NVTF8/12 Cylinder - wire rope Max. 12 kN 1 400 mn 8’, 10’, 12’ NVT6/10, NVTF8/12
Total length (mm) Mini / Max. 4050 4660 5270 3000 / 4070 3600 / 4660
Hole length (mm) Mini / Max. 2 220 2 830 3440 1650 /2870 2260/ 3480
Rod length (mm) Mini / Maxi 2480 3090 3700 1830 / 3090 2475 / 3700
Drilling options #
Rod retainer Hydraulic stinger on feed *Fast rock drill return #
FCC2 (NVTF only) NVTF only NVTF and TF feed
* Alternative options features/components # Additional options features/components
Technical Specification 4-100 S
B14NV 27 m² No 800 mm 1 200kg 360° Yes
2/4
Net weight (kg) 440 470 500 405 431
Technical Specification
Sandvik DD210-V
9-6040-B 2012-09-25
Dimensions machine 900
SANDVIK
0 1 2 D D
Overall length 8470
1850
1950
1300 225 150 1000
1195
1910 All dimensions in mm
4735
Hydraulic system Powerpack Percussion, rotation pump, feed and boom pump Filtration size Oil tank volume Tank filling *Tank filling Oil cooler *Biodegradable oils
Electric system and options HPP545 (45kW)
Total input power Main switch Standard voltages *Optional voltage * Allen bradley Voltage fluctuation Automatic cable reel Cable reel control (in & out) Star delta starter Batteries
3x32cc 12 micron (pressure) 12 micron (return) 130 l Manual pump Electric pump Cooling capacity 25 kW OC25 water-actuated counterflow Shell Naturelle HFE
#
Control system Type Manual boom control Drilling control *Automatic cycle
Electric cable rubber or PUR
IBCQNV Direct control Fully proportional Feed/percussion control Stop and return automatics (only with TF Feed)
#
Cable reel end switch
#
Ground fault and overcurrent protection
Pressure cleaning system with reel Pressure cleaning system without reel # High pressure cleaning system with reel # High pressure cleaning system without reel #
VYK
Flushing system and options Flushing Water pump Water pump capacity Water pump inlet pressure Flushing water pressure Water flushing with air cleaning of hole # Air mist flushing # External air connection # Water hose with hooks
Cleaning system #
60kW QM14 380-660 VAC / 50 or 60 Hz 1000 VAC Electrics system ±10% CRQ At the operator station 380VAC - 690VAC only 2 x 12VAC, 120Ah Depending on voltage (see spec 5-4100) Automatic brake application before end of cable.
5-15 bar 5-15 bar Max. 180 bar Max. 180 bar
Greasing systems and options #
Centralized greasing points Carrier Greasingunit with pump, reel and nozzle Manual
#
Water WBP1 43 l/min (15bar / 5 bar inlet) 2 bar 10-20 bar 1x60l air receiver External water/air connection IP5 air cleaner 32mm (1¼”), 80 meters
Fire suppression system and options #
Hand held fire extinguisher Manual fire suppression system
#
# Additional options features/components * Alternative options features/components
3/4
1 pcs 6 nozzles
Tech. Spec. 5-9800
Technical Specification
Sandvik DD210-V
9-6040-B 2012-09-25
Tramming dimensions 1200
Caging dimensions and weight Front Part
Rear Part
Length (mm)
1 465
3 220
Width (mm)
1 200
1 200
Height (mm)
1 440
1 480
Weight (approximate)....(kg)
2 400
4 000
2600
2750 3400 30° 30°
Nota:Caging and weight on primary dismantling, with wheels.
5100
1340
Outriggers
A
B
A
Standard
2390
2670
B
Narrow
1930
2000 All dimensions in mm
Tramming
Carrier
Tramming speed Gradeability / Inclination
Carrier Carrier type Frame steering Rear oscillation Ground clearance Diesel engine *Diesel engine
TCQ Wheel mounted, frame steering ±30° ±6° 225 mm Deutz F4L912W, 40kW, Tier 2 Deutz D914L04, 58kW, Tier 3 For altitude >2400m *Altitude compensator (only for F4L engine) Exhaust catalyzer Standard Transmission Hydrostatic, automotive Wheel motors Radial piston Tyres 10.00-15 Service Brakes Hydrostatic transmission Spring applied hydraulically released fail safe type oil Parking and emergency Brakes immersed multi disc brakes on each wheel Fuel tank 60 liters Outriggers (front) Hydraulic jacks Vertical (rear) Brake release Manual hand pump *Hydraulic jacks Narrow front outriggers *Hydraulic jacks Extendable front jacks # Wheel chocks and holder 2 pieces
5,7 km/h on horizontal 14%=1:7 =8° 4km/h Max. 15° / 5°
Operator’s station Safety canopy Operation
FOPS (ISO 3449) Standing drilling, seated tramming Ergonomic, adjustable Seat For tramming including seat belt Noise level Operator station: 102 dB(A) (EN791, free field condition) Emitted: 124 dB(A) Reversing alarm Standard
Lights and options Front lights (combined working and driving) Front working lights *Front working lights Rear driving lights # Amber strobe light # Extra working lights # Pedestal lights
2 x 70W (24V) 2 x 70W (24V) 2 x 35W HID (24V) 1 x 70W (24V) Flashing (24V) 2 x 70W (24V) 1 x 150W (24V)
Packages *Harsh water options #
Regional package
*Full diesel Version
L1: Oil cooler +boom cylinders L2: L1+steering and jacks cylinders USC, EUR Air-cooled engine Deutz D914L06, 75 kW (100 hp), Tier 3 Fuel tank capacity 170 liters Compressor & water pump driven by hydraulic motors Total machine weight 8 200 kg Altitude less than 2000 meters
Extra items #
Spare rock drill Spare wheel assembly # Special tools for rock drill # Documentation #
Extra manuals
# Additional options features/components * Alternative options features/components
Sandvik Mining and Construction reserves the right to change this specification without further notice. Sandvik Mining and Construction Lyon S.A.S BP46 - FR-69881 Meyzieu Cedex, France Tel. +33 4 7245 2200 - Fax +33 4 7831 7980 mc.sandvik.com
4/4
n o i t c u r t s n o C d n a g n i n i M k i v d n a S 1 1 0 2 ©
