In this document, the migration object template comparison refers to the fields SAP Structure and SAP Field since these technical names are unique and comparable across all languages and tem…Descripción completa
Customize Business Partner Screens S/4HANA
The Core Rulebook for the Legend RPGDescripción completa
The Core Rulebook for the Legend RPG
Full description
John legend - Ordinary People Original
Full description
Sheet Music For Ordunary People by John Ledend
Mechanical Seals
Mechanical engineering
describes the measurement system
Mechanical Books
Descrição: Describes the mechanisms whereby material fail, and the mechanical engineering principles to design against failure. Includes theories of failure and fatigue.
objective type \Descripción completa
Cyckblbrxv
Vibratometer & Acceleratometer
Mechanical engineering
Mechanical Seals
SEALING SYSTEMS
Dictionary
Customizing the legend in Mechanical
José Ramón Rodríguez ANSYS Iberia
Introduction •
•
•
In structural analysis there are several situations that can cause singularities. These “artificial” hot spots can adversely affect both error plots and convergence. Also the results plot can be confusing because of high non real values.
How can we avoid the singularities?
1. Remove the singularity (e.g. more realistic loads and/or geometry). 2. Scope the results to those zones far away from the singularities. 3. Customize the legend.
How can we avoid the singularities?
1. Remove the singularity (e.g. more realistic loads and/or geometry). 2. Scope the results to those zones far away from the singularities. 3. Customize the legend.
Customizing the legend Right Clicking on the legend in the graphics area allows the user to modify the legend display. Edit Value
Export/Import/Switch to a saved legend setting
Increase/Decrease Contour Bands
Horizontal/Vertical legend Display Date/Time
Switch to Logarithmic Scale
Display Max/Min label on the legend
Switch to Scientific Notation Number of Significant Digits
Continued . . .
The legend bounds can be manipulated to show result distributions more clearly for contour plots.
Max/Min values are unchanged
Click and drag contour dividers (or type in values) to specify contour ranges.
Independent Bands allow neutral colors to represent regions of the model above or below the specified legend limits.
Legend Contour Range
What if I want to change the max and min legend values?
It is possible to customize more deeply the legend by changing its .xml associated file . The procedure to be followed is: 1. Right click on the legend. Select Named Legends and then New
2. Give a name to your customized legend. Click Ok
3. Right click again on the legend. Select Named Legends and then Manage
4. Select the desired Legend and click on Export. Save the .xml file in a known location 5. Open the .xml saved file. This file contains the whole information about the legend settings. For changing the maximum bound go to the last command and modify the next keys: •
value: set here the max value to be plotted
•
valueAuto: change it to 0
For example:
Be careful with the units!!
6. Right click again on the legend. Select Named Legends and then Manage
7. Click on Import. Select the previous .xml file and click Ok.
8. Right click again on the legend. Select Named Legends and then Manage. Select the desired legend.
Comparison
With top independent bands in the legend (see slide 7)
