Como Instalar Leapfrog 4.0.0

http://www.lavteam.org Build date: 04/02/2017 Program name: ARANZ Geo Leapfrog v4.0.0 Protection type: Sentinel HASP, license Cracker's names: Mae Lavteam, black_widow INSTRUCTIONS: Unrar. 0. Let the windows install unsigned drivers: - run windows in the Safe Mode and execute as Admin in command prompt: bcdedit.exe /set nointegritychecks on - bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS - bcdedit.exe -set TESTSIGNING ON Restart PC 1. Install Leapfrog with HASP drivers. After intalled Leapfrog, you have to install HASPUserSetup.exe from the installed directory of leapfrog. (Please note that you have to turn internet off when you launch this software). 2. Import registry key (srm.reg) 3. Install Emulator (in order if you have issues, remove other multikey devices and registry entries before) Desde el Command Prompt: E:\SRM Emulator x64>install.cmd NOTA: SI NO FUNCIONA, run windows in the Safe Mode y volver a ejecutar desde el command Prompt (Chequear capturas de pantalla Snap8.jpg y Snap9.jpg). 4. Restart PC 5. Roll back time to 2016, November- December. NOTE: Use 3-rd party utils such as RunAsDate NOTE: using this med we can run ALL suite from ARANZ (Leapfrog Geo, Leapfrog Mining, Hidrology ...) seneka 09-03-2017 When finish start and check if it works! If all is ok, start Firewall and block Leapfrog Outbound; Add this line 127.0.0.1 licenses.aranzgeo.com in host file located in Windows\System32\drivers\etc\; After this connect to the internet!