College Physics
Student Solutions Manual
1
Chapter 1
CONTENTS Contents..........................................................................................................2 Preface...........................................................................................................12 Chapter 1: Introduction: The Nature of Science and Physics.........................13 1.2 Physical Quantities and Units...............................................................13 1.3 Accuracy, Precision, and Significant Figures.........................................14 Chapter 2: Kinematics...................................................................................16 2.1 Displacement........................................................................................16 2.3 Time, Velocity, and Speed.....................................................................16 2.5 Motion Equations for Constant Acceleration in One Dimension............18 2.7 Falling Objects.......................................................................................21 2.8 Graphical Analysis of One-Dimensional Motion.....................................23 Chapter 3: Two-Dimensional Kinematics........................................................25 3.2 Vector Addition and Subtraction: Graphical Methods............................25 3.3 Vector Addition and Subtraction: Analytical Methods...........................27 3.4 Projectile Motion...................................................................................29 3.5 Addition of Velocities.............................................................................32 Chapter 4: Dynamics: Force and Newton’s Laws of Motion...........................36 4.3 Newton’s Second Law of Motion: Concept of a System........................36 4.6 Problem-Solving Strategies...................................................................37 4.7 Further Applications of Newton’s Laws of Motion.................................41 Chapter 5: Further Application of Newton’s Laws: Friction, Drag, and Elasticity .......................................................................................................................45 2
5.1 Friction..................................................................................................45 5.3 Elasticity: Stress and Strain..................................................................46 Chapter 6: Uniform Circular Motion and Gravitation......................................49 6.1 Rotation Angle and Angular Velocity.....................................................49 6.2 Centripetal Acceleration.......................................................................50 6.3 Centripetal Force..................................................................................50 6.5 Newton’s Universal Law of Gravitation.................................................51 6.6 Satellites and Kepler’s Laws: An Argument for Simplicity.....................52 Chapter 7: Work, Energy, and Energy Resources...........................................54 7.1 Work: The Scientific Definition..............................................................54 7.2 Kinetic Energy and the Work-Energy Theorem.....................................55 7.3 Gravitational Potential Energy..............................................................55 7.7 Power....................................................................................................56 7.8 Work, Energy, and Power in Humans....................................................57 Chapter 8: Linear Momentum and Collisions.................................................61 8.1 Linear Momentum and Force................................................................61 8.2 Impulse.................................................................................................61 8.3 Conservation of Momentum..................................................................62 8.5 Inelastic Collisions in One Dimension...................................................63 8.6 Collisions of Point Masses in Two Dimensions.......................................65 8.7 Introduction to Rocket Propulsion.........................................................67 Chapter 9: Statics and Torque........................................................................69 9.2 The Second Condition for Equilibrium...................................................69 9.3 Stability.................................................................................................69
3
9.6 Forces and Torques in Muscles and Joints.............................................72 Chapter 10: Rotational Motion and Angular Momentum................................73 10.1 Angular Acceleration...........................................................................73 10.3 Dynamics of Rotational Motion: Rotational Inertia..............................74 10.4 Rotational Kinetic Energy: Work and Energy Revisited.......................76 10.5 Angular Momentum and Its Conservation...........................................78 10.6 Collisions of Extended Bodies in Two Dimensions...............................78 Chapter 11: Fluid Statics................................................................................80 11.2 Density................................................................................................80 11.3 Pressure..............................................................................................80 11.4 Variation of Pressure with Depth in a Fluid.........................................81 11.5 Pascal’s Principle.................................................................................82 11.7 Archimedes’ Principle..........................................................................84 11.8 Cohesion and Adhesion in Liquids: Surface Tension and Capillary Action..........................................................................................................86 11.9 Pressures in the Body.........................................................................87 Chapter 12: Fluid Dynamics and Its Biological and Medical Applications......90 12.1 Flow Rate and Its Relation to Velocity.................................................90 12.2 Bernoulli’s Equation............................................................................91 12.3 The Most General Applications of Bernoulli’s Equation.......................92 12.4 Viscosity and Laminar Flow; Poiseuille’s Law......................................92 12.5 The Onset of Turbulence.....................................................................94 12.7 Molecular Transport Phenomena: Diffusion, Osmosis, and Related Processes....................................................................................................95 Chapter 13: Temperature, Kinetic Theory, and the Gas Laws........................97 4
13.1 Temperature........................................................................................97 13.2 Thermal Expansion of Solids and Liquids............................................98 13.3 The Ideal Gas Law...............................................................................98 13.4 Kinetic Theory: Atomic and Molecular Explanation of Pressure and Temperature..............................................................................................101 13.6 Humidity, Evaporation, and Boiling...................................................101 Chapter 14: Heat and Heat Transfer Methods..............................................104 14.2 Temperature Change and Heat Capacity..........................................104 14.3 Phase Change and Latent Heat........................................................105 14.5 Conduction........................................................................................107 14.6 Convection........................................................................................108 14.7 Radiation...........................................................................................109 Chapter 15: Thermodynamics......................................................................112 15.1 The First Law of Thermodynamics....................................................112 15.2 The First Law of Thermodynamics and Some Simple Processes.......113 15.3 Introduction to the Second Law of Thermodynamics: Heat Engines and Their Efficiency.........................................................................................114 15.5 Applications of Thermodynamics: Heat Pumps and Refrigerators....114 15.6 Entropy and the Second Law of Thermodynamics: Disorder and the Unavailability of Energy............................................................................115 15.7 Statistical Interpretation of Entropy and the Second Law of Thermodynamics: The Underlying Explanation.........................................116 Chapter 16: Oscillatory Motion and Waves..................................................118 16.1 Hooke’s Law: Stress and Strain Revisited.........................................118 16.2 Period and Frequency in Oscillations................................................119 16.3 Simple Harmonic Motion: A Special Periodic Motion.........................119 5
16.4 The Simple Pendulum.......................................................................119 16.5 Energy and the Simple Harmonic Oscillator......................................120 16.6 Uniform Circular Motion and Simple Harmonic Motion......................121 16.8 Forced Oscillations and Resonance...................................................122 16.9 Waves...............................................................................................122 16.10 Superposition and Interference.......................................................123 16.11 Energy in Waves: Intensity.............................................................124 Chapter 17: Physics of Hearing....................................................................125 17.2 Speed of Sound, Frequency, and Wavelength...................................125 17.3 Sound Intensity and Sound Level......................................................125 17.4 Doppler Effect and Sonic Booms.......................................................127 17.5 Sound Interference and Resonance: Standing Waves in Air Columns ..................................................................................................................127 17.6 Hearing.............................................................................................129 17.7 Ultrasound........................................................................................130 Chapter 18: Electric Charge and Electric Field.............................................133 18.1 Static Electricity and Charge: Conservation of Charge.....................133 18.2 Conductors and Insulators................................................................133 18.3 Coulomb’s Law..................................................................................134 18.4 Electric Field: COncept of a Field Revisited.......................................136 18.5 Electric Field Lines: Multiple Charges................................................137 18.7 Conductors and Electric Fields in Static Equilibrium.........................138 18.8 Applications of Electrostatics............................................................141 Chapter 19: Electric Potential and Electric Field..........................................142 19.1 Electric Potential Energy: Potential Difference..................................142 6
19.2 Electric Potential in a Uniform Electric Field......................................142 19.3 Electric Potential Due to a Point Charge...........................................144 19.4 Equipotential Lines...........................................................................144 19.5 Capacitors and Dieletrics..................................................................145 19.6 Capacitors in Series and Parallel.......................................................145 19.7 Energy Stored in Capacitors.............................................................146 Chapter 20: Electric Current, Resistance, and Ohm’s Law...........................148 20.1 Current..............................................................................................148 20.2 Ohm’s Law: Resistance and Simple Circuits......................................149 20.3 Resistance and Resistivity................................................................150 20.4 Electric Power and Energy................................................................152 20.5 Alternating Current versus Direct Current........................................155 20.6 Electric Hazards and the Human Body..............................................156 Chapter 21: Circuits, Bioelectricity, and DC Instruments.............................157 21.1 Resistors in Series and Parallel.........................................................157 21.2 Electromotive Force: Terminal Voltage..............................................158 21.3 Kirchhoff’s Rules...............................................................................159 21.4 DC Voltmeters and Ammeters..........................................................159 21.5 Null Measurements...........................................................................161 21.6 DC Circuits Containing Resistors and Capacitors..............................161 Chapter 22: Magnetism...............................................................................163 22.4 Magnetic Field Strength: Force on a Moving Charge in a Magnetic Field ..................................................................................................................163 22.5 Force on a Moving Charge in a Magnetic Field: Examples and Applications..............................................................................................164 7
22.6 The Hall Effect...................................................................................165 22.7 Magnetic Force on a Current-Carrying Conductor.............................166 22.8 Torque on a Current Loop: Motors and Meters..................................166 22.10 Magnetic Force between Two Parallel Conductors..........................167 22.11 More Applications of Magnetism.....................................................170 Chapter 23: Electromagnetic Induction, AC Circuits, and Electrical Technologies................................................................................................173 23.1 Induced Emf and Magnetic Flux........................................................173 23.2 Faraday’s Law of Induction: Lenz’s Law............................................173 23.3 Motional Emf.....................................................................................174 23.4 Eddy Currents and Magnetic Damping.............................................175 23.5 Electric Generators...........................................................................175 23.6 Back Emf...........................................................................................176 23.7 Transformers.....................................................................................176 23.9 Inductance........................................................................................177 23.10 RL Circuits.......................................................................................178 23.11 Reactance, Inductive and Capacitive..............................................179 23.12 RLC Series AC Circuits.....................................................................179 Chapter 24: Electromagnetic Waves............................................................182 24.1 Maxwell’s Equations: Electromagnetic Waves Predicted and Observed ..................................................................................................................182 24.3 The Electromagnetic Spectrum.........................................................182 24.4 Energy in Electromagnetic Waves.....................................................183 Chapter 25: Geometric Optics.....................................................................187 25.1 The Ray Aspect of Light....................................................................187 8
25.3 The Law of Refraction.......................................................................187 25.4 Total Internal Reflection....................................................................188 25.5 Dispersion: The Rainbow and Prisms................................................188 25.6 Image Formation by Lenses..............................................................189 25.7 Image Formation by Mirrors..............................................................190 Chapter 26: Vision and Optical Instruments................................................191 26.1 Physics of the Eye.............................................................................191 26.2 Vision Correction...............................................................................191 26.5 Telescopes.........................................................................................192 26.6 Aberrations.......................................................................................192 Chapter 27: Wave Optics.............................................................................194 27.1 The Wave Aspect of Light: Interference............................................194 27.3 Young’s Double Slit Experiment........................................................194 27.4 Multiple Slit Diffraction......................................................................195 27.5 Single Slit Diffraction........................................................................197 27.6 Limits of Resolution: The Rayleigh Criterion.....................................198 27.7 Thin Film Interference.......................................................................199 27.8 Polarization.......................................................................................200 Chapter 28: Special Relativity......................................................................201 28.2 Simultaneity and Time Dilation.........................................................201 28.3 Length Contraction...........................................................................202 28.4 Relativistic Addition of Velocities......................................................203 28.5 Relativistic Momentum.....................................................................204 28.6 Relativistic Energy............................................................................205
9
Chapter 29: Introduction to Quantum Physics.............................................207 29.1 Quantization of Energy.....................................................................207 29.2 The Photoelectric Effect....................................................................207 29.3 Photon Energies and the Electromagnetic Spectrum........................208 29.4 Photon Momentum............................................................................210 29.6 The Wave Nature of Matter...............................................................210 29.7 Probability: The Heisenberg Uncertainty Principle............................211 29.8 The Particle-Wave Duality Reviewed.................................................211 Chapter 30: Atomic Physics.........................................................................213 30.1 Discovery of the Atom......................................................................213 30.3 Bohr’s Theory of the Hydrogen Atom................................................213 30.4 X Rays: Atomic Origins and Applications..........................................215 30.5 Applications of Atomic Excitations and De-Excitations.....................215 30.8 Quantum Numbers and Rules...........................................................216 30.9 The Pauli Exclusion Principle.............................................................216 Chapter 31: Radioactivity and Nuclear Physics...........................................219 31.2 Radiation Detection and Detectors...................................................219 31.3 Substructure of the Nucleus.............................................................219 31.4 Nuclear Decay and Conservation Laws.............................................220 31.5 Half-Life and Activity.........................................................................222 31.6 Binding Energy..................................................................................224 31.7 Tunneling..........................................................................................225 Chapter 32: Medical Applications of Nuclear Physics...................................227 32.1 Medical Imaging and Diagnostics.....................................................227
10
32.2 Biological Effects of Ionizing Radiation.............................................228 32.3 Therapeutic Uses of Ionizing Radiation.............................................228 32.5 Fusion...............................................................................................229 32.6 Fission...............................................................................................230 32.7 Nuclear Weapons..............................................................................230 Chapter 33: Particle Physics........................................................................232 33.2 The Four Basic Forces.......................................................................232 33.3 Accelerators Create Matter from Energy...........................................232 33.4 Particles, Patterns, and Conservation Laws......................................233 33.5 Quarks: Is That All There Is?.............................................................234 33.6 GUTS: The Unification of Forces........................................................236 Chapter 34: Frontiers of Physics..................................................................238 34.1 Cosmology and Particle Physics........................................................238
PREFACE The Student’s Solutions Manual provides solutions to select Problems & Exercises from Openstax College Physics. The purpose of this manual and of the Problems & Exercises is to build problem-solving skills that are critical to understanding and applying the principles of physics. The text of College Physics contains many features that will help you not only to solve problems, but to understand their concepts, including Problem-Solving Strategies, Examples, Section Summaries, and chapter Glossaries. Before turning to the problem solutions in this manual, you should use these features in your text to your advantage. The worst thing you can do with the solutions manual is to copy the answers directly without thinking about the problem-solving process and the concepts involved. The text of College Physics is available in multiple formats (online, PDF, epub, and print) from http://openstaxcollege.org/textbooks/college-physics. 11
While these multiple formats provide you with a wide range of options for accessing and repurposing the text, they also present some challenges for the organization of this solutions manual, since problem numbering is automated and the same problem may be numbered differently depending on the format selected by the end user. As such, we have decided to organize the Problems & Exercises manual by chapter and section, as they are organized in the PDF and print versions of College Physics. See the Table of Contents on the previous page. Problem numbering throughout the solutions manual will match the numbering in the PDF version of the product, provided that users have not modified or customized the original content of the book by adding or removing problems. Numbering of Tables, Figures, Examples, and other elements of the text throughout this manual will also coincide with the numbering in the PDF and print versions of the text. For online and epub users of College Physics, we have included question stem along with the solution for each Problem order to minimize any confusion caused by discrepancies in numbering. Images, figures, and tables —which occasionally accompany or complement problems and exercises— have been omitted from the solutions manual to save space.
12
College Physics
Student Solutions Manual
Chapter 1
CHAPTER 1: INTRODUCTION: THE NATURE OF SCIENCE AND PHYSICS 1.2 PHYSICAL QUANTITIES AND UNITS 4.
American football is played on a 100-yd-long field, excluding the end zones. How long is the field in meters? (Assume that 1 meter equals 3.281 feet.)
Soluti on
Since 3 feet = 1 yard and 3.281 feet = 1 meter, multiply 100 yards by these conversion factors to cancel the units of yards, leaving the units of meters:
100 yd 100 yd
3 ft 1m 91.4 m 1 yd 3.281 ft
A football field is 91.4 m long.
10.
(a) Refer to Table 1.3 to determine the average distance between the Earth and the Sun. Then calculate the average speed of the Earth in its orbit in kilometers per second. (b) What is this in meters per second?
Soluti on
(a) The average speed of the earth’s orbit around the sun is calculated by dividing the distance traveled by the time it takes to go one revolution:
13
College Physics
Student Solutions Manual
average speed
Chapter 1
2 (average dist of Earth to sun) 1 year 2 ( 108 km) 1 d 1h 20 km/s 365.25 d 24 h 3600 s
The earth travels at an average speed of 20 km/s around the sun. (b) To convert the average speed into units of m/s, use the conversion factor: 1000 m = 1 km:
average speed
20 km 1000 m 20 10 3 m/s s 1 km
1.3 ACCURACY, PRECISION, AND SIGNIFICANT FIGURES 15.
(a) Suppose that a person has an average heart rate of 72.0 beats/min. How many beats does he or she have in 2.0 y? (b) In 2.00 y? (c) In 2.000 y?
14
College Physics
Soluti on
Student Solutions Manual
Chapter 1
(a) To calculate the number of beats she has in 2.0 years, we need to multiply 72.0 beats/minute by 2.0 years and use conversion factors to cancel the units of time:
72.0 beats 60.0 min 24.0 h 365.25 d 2.0 y 7.5738 10 7 beats 1 min 1.00 h 1.00 d 1.00 y Since there are only 2 significant figures in 2.0 years, we must 7 7.6 10 beats. report the answer with 2 significant figures:
(b) Since we now have 3 significant figures in 2.00 years, we now 7 7.57 10 beats. report the answer with 3 significant figures:
(c) Even though we now have 4 significant figures in 2.000 years, the 72.0 beats/minute only has 3 significant figures, so we must 7 7.57 10 beats. report the answer with 3 significant figures:
21.
A person measures his or her heart rate by counting the number
30 s
30.0 0.5 s , what is the
40 1
of beats in . If beats are counted in heart rate and its uncertainty in beats per minute?
Soluti on
To calculate the heart rate, we need to divide the number of beats by the time and convert to beats per minute.
beats 40 beats 60.0 s 80 beats/min minute 30.0 s 1.00 min
15
College Physics
Student Solutions Manual
Chapter 1
To calculate the uncertainty, we use the method of adding percents.
% unc
1 beat 0 .5 s 100% 100% 2.5% 1.7% 4.2% 4% 40 beats 30.0 s
Then calculating the uncertainty in beats per minute:
δ A
% unc 4.2% A 80 beats/min 3.3 beats/min 3 beats/min 100% 100%
Notice that while doing calculations, we keep one EXTRA digit, and round to the correct number of significant figures only at the end.
So, the heart rate is
27.
80 3 beats/min .
The length and width of a rectangular room are measured to be
3.955 0.005 m and 3.050 0.005 m . Calculate the area of the room and its uncertainty in square meters.
Soluti on
2 3.995 m 3.050 m 12.06 m . Now use the method of adding The area is
percents to get uncertainty in the area.
0.005 m 100% 0.13% 3.955 m 0.005 m % unc width 100% 0.16% 3.050 m % unc area % unc length % unc width 0.13% 0.16% 0.29% 0.3%
% unc length
16
College Physics
Student Solutions Manual
Chapter 1
Finally, using the percent uncertainty for the area, we can calculate the uncertainty in square meters:
δ area
% unc area 0.29% area 12.06 m 2 0.035 m 2 0.04 m 2 100% 100%
2 12. 0 6 0 . 04 m . The area is
17
College Physics
Student Solutions Manual
Chapter 2
CHAPTER 2: KINEMATICS 2.1 DISPLACEMENT
1.
Find the following for path A in Figure 2.59: (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.
Solutio n
(a) The total distance traveled is the length of the line from the dot to the arrow in path A, or 7 m.
(b) The distance from start to finish is the magnitude of the difference between the position of the arrows and the position of the dot in path A:
x x2 x1 7 m 0 m 7 m
(c) The displacement is the difference between the value of the position of the arrow and the value of the position of the dot in path A: The displacement can be either positive or negative:
x x2 x1 7 m 0 m 7 m 2.3 TIME, VELOCITY, AND SPEED
18
College Physics
14.
Student Solutions Manual
Chapter 2
A football quarterback runs 15.0 m straight down the playing field in 2.50 s. He is then hit and pushed 3.00 m straight backward in 1.75 s. He breaks the tackle and runs straight forward another 21.0 m in 5.20 s. Calculate his average velocity (a) for each of the three intervals and (b) for the entire motion. (a) The average velocity for the first segment is the distance
Solutio n
traveled downfield (the positive direction) divided by the time he
_
v1 traveled:
displaceme nt 15.0 m 6.00 m/s (forward) time 2.50 s
The average velocity for the second segment is the distance traveled (this time in the negative direction because he is traveling backward) divided by the time he traveled:
_
v2
3.00 m 1.71 m/s (backward) 1.75 s
Finally, the average velocity for the third segment is the distance traveled (positive again because he is again traveling downfield)
_
v3 divided by the time he traveled:
21.0 m 4.04 m/s(forwar d) 5.20 s
(b) To calculate the average velocity for the entire motion, we add the displacement from each of the three segments (remembering the sign of the numbers), and divide by the total time for the
19
College Physics
Student Solutions Manual
_
v total motion:
Chapter 2
15.0 m 3.00 m 21.0 m 3.49 m/s 2.50 s 1.75 s 5.20 s
Notice that the average velocity for the entire motion is not just the addition of the average velocities for the segments.
15.
The planetary model of the atom pictures electrons orbiting the atomic nucleus much as planets orbit the Sun. In this model you can view hydrogen, the simplest atom, as having a single electron in a circular orbit
10 1.0610 m in diameter. (a) If the average speed of the
6 2 . 20 10 m/s , calculate the electron in this orbit is known to be
number of revolutions per second it makes about the nucleus. (b) What is the electron’s average velocity?
(a) The average speed is defined as the total distance traveled Solutio n
divided by the elapsed time, so that:
average speed
distance traveled 2.20 10 6 m/s time elapsed
If we want to find the number of revolutions per second, we need to know how far the electron travels in one revolution.
distance traveled 2r 2 [(0.5)(1.06 10 10 m)] 3.33 10 -10 m revolution 1 rev 1 rev 1 rev So to calculate the number of revolutions per second, we need to divide the average speed by the distance traveled per revolution, 20
College Physics
Student Solutions Manual
Chapter 2
thus canceling the units of meters:
rev average speed 2.20 10 6 m/s 6.61 1015 rev/s 10 s distance/r evolution 3.33 10 m/revoluti on (b) The velocity is defined to be the displacement divided by the time of travel, so since there is no net displacement during any
one revolution:
v 0 m/s .
2.5 MOTION EQUATIONS FOR CONSTANT ACCELERATION IN ONE DIMENSION
21.
A well-thrown ball is caught in a well-padded mitt. If the 3 4 2 (1 ms 10 s) 2 . 10 10 m/s deceleration of the ball is , and 1.85 ms
elapses from the time the ball first touches the mitt until it stops, what was the initial velocity of the ball?
21
College Physics
Given:
Solutio n
Student Solutions Manual
Chapter 2
a 2.10 10 4 m/s 2 ; t 1.85 ms 1.85 10 3 s; v 0 m/s , find v0 . We
v use the equation 0
v at
because it involves only terms we
know and terms we want to know. Solving for our unknown gives:
v0 v at 0 m/s (2.10 10 4 m/s 2 )(1.85 10 3 s) 38.9 m/s
(about 87 miles
per hour)
26.
Professional Application Blood is accelerated from rest to 30.0 cm/s in a distance of 1.80 cm by the left ventricle of the heart. (a) Make a sketch of the situation. (b) List the knowns in this problem. (c) How long does the acceleration take? To solve this part, first identify the unknown, and then discuss how you chose the appropriate equation to solve for it. After choosing the equation, show your steps in solving for the unknown, checking your units. (d) Is the answer reasonable when compared with the time for a heartbeat?
Solutio n
(a)
22
College Physics
Student Solutions Manual
(b) Knowns: “Accelerated from rest”
“to 30.0 cm/s”
Chapter 2
v0 0 m/s
v 0.300 m/s
“in a distance of 1.80 cm”
x x0 0.0180 m . t
(c) “How long” tells us to find . To determine which equation to use,
v , v, x x 0 we look for an equation that has 0 and , since those are
t
parameters that we know or want to know. Using the equations
_
_
x x0 v t
v and
Solving for
v0 v 2
t gives:
t
v0 v t 2 .
x x0 gives
2( x x 0 ) 2(0.0180 m) 0.120 s v0 v (0 m/s) (0.300 m/s)
It takes 120 ms to accelerate the blood from rest to 30.0 cm/s. Converting everything to standard units first makes it easy to see that the units of meters cancel, leaving only the units of seconds.
(d) Yes, the answer is reasonable. An entire heartbeat cycle takes about one second. The time for acceleration of blood out of the 23
College Physics
Student Solutions Manual
Chapter 2
ventricle is only a fraction of the entire cycle.
32.
Professional Application A woodpecker’s brain is specially protected from large decelerations by tendon-like attachments inside the skull. While pecking on a tree, the woodpecker’s head comes to a stop from an initial velocity of 0.600 m/s in a distance of only 2.00 mm. (a) Find the acceleration in
g g 9.80 m/s 2
m/s 2 and in multiples of
. (b) Calculate the stopping time. (c) The tendons
cradling the brain stretch, making its stopping distance 4.50 mm (greater than the head and, hence, less deceleration of the brain). What is the brain’s deceleration, expressed in multiples of
Solutio n
(a) Find
g?
a (which should be negative).
Given: “comes to a stop”
v 0 m/s.
“from an initial velocity of”
v0 0.600 m/s .
-3 x x 2.00 10 m. 0 “in a distance of 2.00 m”
So, we need an equation that involves
24
a , v, v 0 ,
and
x x0 ,
or the
College Physics
Student Solutions Manual
Chapter 2
2
equation
v 2 v 0 2a ( x x 0 )
, so that
v 2 v02 (0 m/s) 2 (0.600 m/s) 2 a 90.0 m/s 2 3 2( x x0 ) 2(2.00 10 m)
So the deceleration is
90.0 m/s 2 . To get the deceleration in a
multiples of
g , we divide a by g :
90.0 m/s 2 9.18 a 9.18 g. g 9.80 m/s 2
t
(b) The words “Calculate the stopping time” mean find . Using
1 x x 0 ( v 0 v )t 2
gives
1 x x0 (v0 v)t 2 , so that
2( x x 0 ) 2(2.00 10 3 m) t 6.67 10 3 s v0 v (0.600 m/s) (0 m/s) (c) To calculate the deceleration of the brain, use
x x0 4.50 mm 4.50 103 m
instead of 2.00 mm. Again, we use
25
College Physics
Student Solutions Manual
Chapter 2
v 2 v02 a 2( x x0 ) , so that: v 2 v02 (0 m/s) 2 (0.600 m/s) 2 a 40.0 m/s 2 -3 2( x x0 ) 2(4.50 10 m) And expressed in multiples of g gives:
a
40.0 m/s 2 4.08 a 4.08 g g 9.80 m/s 2 2.7 FALLING OBJECTS
41.
Calculate the displacement and velocity at times of (a) 0.500, (b) 1.00, (c) 1.50, and (d) 2.00 s for a ball thrown straight up with an initial velocity of 15.0 m/s. Take the point of release to be
y0 0
.
Knowns: Solutio n
a accelerati on due to gravity g 9.8 m/s 2 ; y0 0 m; v0 15.0 m/s To find displacement we use we use
v v0 at
.
26
1 y y0 v0t at 2 2 , and to find velocity
College Physics
Student Solutions Manual
Chapter 2
1 y1 y0 v0t1 at12 2 1 0 m (15.0 m/s)(0.500 s) (9.8 m/s 2 )(0.500 s) 2 6.28 m 2 v v0 at1 (15.0 m/s) (9.8 m/s 2 )(0.500 s) 10.1 m/s (a) 1 1 y 2 y0 v0t 2 at 22 2 1 0 m (15.0 m/s)(1.00 s) (9.8 m/s 2 )(1.00 s) 2 10.1 m 2 v v0 at 2 (15.0 m/s) (9.8 m/s 2 )(1.00 s) 5.20 m/s (b) 2 1 y3 y0 v0t3 at32 2
(c)
1 0 m (15.0 m/s)(1.50 s) (9.8 m/s 2 )(1.50 s) 2 11.5 m 2 v3 v0 at3 (15.0 m/s) (9.8 m/s 2 )(1.50 s) 0.300 m/s
The ball is almost at the top.
1 y4 y0 v0t 4 at 42 2
(d)
1 0 m (15.0 m/s)(2.00 s) (9.8 m/s 2 )(2.00 s) 2 10.4 m 2 v4 v0 at 4 (15.0 m/s) (9.8 m/s 2 )(2.00 s) 4.60 m/s
The ball has begun to drop.
47.
(a) Calculate the height of a clif if it takes 2.35 s for a rock to hit the ground when it is thrown straight up from the clif with an initial velocity of 8.00 m/s. (b) How long would it take to reach the ground if it is thrown straight down with the same speed?
27
College Physics
Student Solutions Manual
Chapter 2
Solutio n
(a) Knowns:
t 2.35 s; y 0 m; v0 8.00 m/s; a 9.8 m/s 2
t y , v0 , and a and want to find y0
Since we know ,
equation
,
we can use the
1 y y 0 v 0 t at 2 2 .
1 y (0 m) (8.00 m/s)(2.35 s) (9.80 m/s 2 )(2.35 s) 2 8.26 m 2 , so the cliff is 8.26 m high.
(b) Knowns:
y 0 m; y0 8.26 m; v0 8.00 m/s; a 9.80 m/s 2
Now we know
equation
y , y0 , v0 , and a and want to find t , so we use the
1 y y0 v0t at 2 2
again. Rearranging,
28
College Physics
t
Student Solutions Manual
Chapter 2
v0 v02 4(0.5a )( y0 y ) 2 ( 0 .5 a )
(8.00 m/s) (8.00 m/s) 2 2(9.80 m/s 2 )(8.26 m 0 m) t (9.80 m/s 2 ) 8.00 m/s 15.03 m/s 9.80 m/s 2 t 0.717 s or 2.35 s t 0.717 s
2.8 GRAPHICAL ANALYSIS OF ONE-DIMENSIONAL MOTION
59.
(a) By taking the slope of the curve in Figure 2.60, verify that the
t 20 s
velocity of the jet car is 115 m/s at . (b) By taking the slope of the curve at any point in Figure 2.61, verify that the jet car’s 2 5.0 m/s acceleration is .
Solutio n
position vs. time 4000 position (meters) 2000 0 0 5 10 15 20 25 30 35 time (seconds)
(a)
29
College Physics
Student Solutions Manual
Chapter 2
In the position vs. time graph, if we draw a tangent to the curve at
t 20 s , we can identify two points: x 0 m, t 5 s and
x 1500 m, t 20 s v
so we can calculate an approximate slope:
rise (2138 988) m 115 m/s run (25 15) s
So, the slope of the displacement vs. time curve is the velocity curve.
velocity vs. time 200 velocity (meters per second)
100 0
20 0 40
time (seconds)
(b)
In the velocity vs. time graph, we can identify two points:
v 65 m/s , t 10 s and v 140 m/s , t 25 s . Therefore , the slope is a
rise (140 - 65) m/s 5.0 m/s 2 run (25 - 10) s 30
College Physics
Student Solutions Manual
Chapter 2
The slope of the velocity vs. time curve is the acceleration curve.
31
College Physics
Student Solutions Manual
Chapter 3
CHAPTER 3: TWO-DIMENSIONAL KINEMATICS 3.2 VECTOR ADDITION AND SUBTRACTION: GRAPHICAL METHODS 1.
Find the following for path A in Figure 3.54: (a) the total distance traveled, and (b) the magnitude and direction of the displacement from start to finish.
Soluti on
(a) To measure the total distance traveled, we take a ruler and measure the length of Path A to the north, and add to it to the length of Path A to the east. Path A travels 3 blocks north and 1 block east, for a total of four blocks. Each block is 120 m, so the
distance traveled is
d 4 120 m 480 m
(b) Graphically, measure the length and angle of the line from the start to the arrow of Path A. Use a protractor to measure the angle, with the center of the protractor at the start, measure the angle to where the arrow is at the end of Path A. In order to do this, it may be necessary to extend the line from the start to the arrow of Path A, using a ruler. The length of the displacement vector, measured from the start to the arrow of Path A, along the line you just drew.
S 379 m, 18.4 E of N
32
College Physics
7.
Student Solutions Manual
Chapter 3
Repeat the problem two problems prior, but for the second leg you
walk 20.0 m in a direction
B
40.0 o north of east (which is equivalent to
R' A B
A
subtracting from —that is, to finding ). (b) Repeat the problem two problems prior, but now you first walk 20.0 m in a
direction
40.0 o south of west and then 12.0 m in a direction 20.0 east
of south (which is equivalent to subtracting finding
Soluti on
A from B —that is, to
R B A R ). Show that this is the case.
(a) To do this problem, draw the two vectors A and B’ = –B tip to tail The vector A should be 12.0 units long and at an as shown below. angle of
20 to the left of the y-
axis. Then at the arrow of vector units long and A, draw the vector B’ = –B, which should be 20.0
40
at an angle of above the x-axis. The resultant vector, R’, goes from the tail of vector A to the tip of vector B, and therefore has an angle of
above the x-axis. Measure the length of the
resultant vector using your ruler, and use a protractor with center at the tail of the resultant vector to get the angle.
33
College Physics
Student Solutions Manual
Chapter 3
R 26.6 m, and 65.1 N of E
(b) To do this problem, draw the two vectors B and A” = –A tip to tail The vector B should be 20.0 units long and at an as shown below. angle of
40 below the x-axis.
angle of
20 to the right of the negative y-axis. The resultant
Then at the arrow of vector B, draw units long and at an the vector A” = –A, which should be 12.0
vector, R”, goes from the tail of vector B to the tip of vector A”, an angle of
below the x-axis. Measure the
and therefore has length of the resultant vector using
your ruler, and use a
protractor with center at the tail of the resultant vector to get the angle.
34
College Physics
Student Solutions Manual
Chapter 3
R 26.6 m, and 65.1 S of W
So the length is the same, but the direction is reversed from part (a).
3.3 VECTOR ADDITION AND SUBTRACTION: ANALYTICAL METHODS 13.
Find the following for path C in Figure 3.58: (a) the total distance traveled and (b) the magnitude and direction of the displacement from start to finish. In this part of the problem, explicitly show how you follow the steps of the analytical method of vector addition.
Soluti on
(a) To solve this problem analytically, add up the distance by counting the blocks traveled along the line that is Path C:
d 1 120 m 5 120 m 2 120 m 1 120 m 1 120 m 3 120 m 1.56 10 3 m (b) To get the displacement, calculate the displacements in the xand y- directions separately, then use the formulas for adding vectors. The displacement in the x-direction is calculated by 35
College Physics
Student Solutions Manual
Chapter 3
adding the x-distance traveled in each leg, being careful to subtract values when they are negative:
s x 0 600 0 120 0 360 m 120 m Using the same method, calculate the displacement in the ydirection:
s y 120 0 240 0 120 0 m 0 m R Rx2 R y2
tan 1 R x Ry and
Now using the equations calculate the total displacement vectors:
,
s s 2 x s 2 y (120 m) 2 (0 m) 2 120 m Sy
θ tan 1
tan 1 0 m Sx 120 m
0 east , so that S = 120 m, east 19.
Do Problem 3.16 again using analytical techniques and change the second leg of the walk to subtracting
B
from
25.0 m
straight south. (This is equivalent to
A —that is, finding R' = A - B ) (b) Repeat again,
but now you first walk
25.0 m
north and then
36
18.0 m east. (This is
College Physics
Student Solutions Manual
A
equivalent to subtract from consistent with your result?)
Soluti on
Chapter 3
B —that is, to find A B C . Is that
(a) We want to calculate the displacement for walk 18.0 m to the west, followed by 25.0 m to the south. First, calculate the displacement in the x- and y-directions, using the equations
Rx Ax Bx
and
R y Ay B y
: (the angles are measured from due
east).
Rx 18.0 m, R y 25.0 m R R R 2 x
2 y
Then, using the equations and calculate the total displacement vectors: 2
2
R' R x R y (18.0 m) 2 (25.0 m) 2 30.8 m θ tan 1
opp 25.0 m tan 1 54.2 S of W adj 18.0 m
37
Rx
tan 1
R y
,
College Physics
Student Solutions Manual
Chapter 3
(b) Now do the same calculation, except walk 25.0 m to the north,
followed by 18.0 m to the east. Use the equations
Rx Ax Bx
R y Ay B y Rx = 18.0 m, R y = 25.0 m :
Then, use the equations 2
1 R x tan . R R R R y and 2 x
2 y
2
R" Rx R y (18.0 m) 2 (25.0 m) 2 30.8 m θ tan 1
opp 25.0 m tan 1 54.2 N of E adj 18.0 m
which is consistent with part (a).
3.4 PROJECTILE MOTION
38
and
College Physics
Student Solutions Manual
Chapter 3
30.
A rugby player passes the ball 7.00 m across the field, where it is caught at the same height as it left his hand. (a) At what angle was the ball thrown if its initial speed was 12.0 m/s, assuming that the smaller of the two possible angles was used? (b) What other angle gives the same range, and why would it not be used? (c) How long did this pass take?
Soluti on
(a) Find the range of a projectile on level ground for which air resistance is negligible: 2
v sin 2θ 0 R 0 , v g where 0
is the initial speed and 0 is the initial angle relative to the horizontal. Solving for initial angle gives:
gR 1 θ 0 sin 1 2 2 v0
Therefore,
, where:
R 7.0 m, v0 12.0 m/s, and g 9.8 m/s 2 .
1 1 (9.80 m/s 2 )(7.0 m) 14.2 θ 0 sin 2 2 (12.0 m/s) 2
(b) Looking at the equation
v sin 2θ 0 R 0 , g
θ ' , where θ0 same for another angle, 0 θ0' 90 14.2 75.8
we see that range will be
θ0' 90
or
.
This angle is not used as often, because the time of flight will be longer. In rugby that means the defense would have a greater 39
College Physics
Student Solutions Manual
Chapter 3
time to get into position to knock down or intercept the pass that has the larger angle of release.
40.
An eagle is flying horizontally at a speed of 3.00 m/s when the fish in her talons wiggles loose and falls into the lake 5.00 m below. Calculate the velocity of the fish relative to the water when it hits the water.
Soluti on
x-direction (horizontal)
Given:
v0 ,x = 3.00 m/s, a x = 0 m/s 2 .
v. Calculate x vx = v0,x = constant = 3.00 m/s y-direction (vertical)
Given:
v0,y = 0.00 m/s, a y = g = 9.80 m/s 2 , Δy y y0 5.00 m
v. Calculate y v 2y = v02, y , 2 g y-y 0 v y (0 m/s) 2 2(9.80 m/s 2 )( 5.00 m) 9.90 m/s Now we can calculate the final velocity:
40
College Physics
Student Solutions Manual
2
Chapter 3
2
v v x v y (3.00 m/s) 2 (9.90 m/s ) 2 10.3 m/s
and
vy 9.90 m/s tan 1 73.1 v 3.00 m/s x
θ tan 1
so that
v 10.3 m/s, 73.1 below the horizontal
46.
5.00 m/s
A basketball player is running at directly toward the basket when he jumps into the air to dunk the ball. He maintains his horizontal velocity. (a) What vertical velocity does he need to rise 0.750 m above the floor? (b) How far from the basket (measured in the horizontal direction) must he start his jump to reach his maximum height at the same time as he reaches the basket?
Soluti on
(a) Given:
v x 5.00 m/s, y y 0 0.75 m, v y 0 m/s, a y g 9.80 m/s 2 .
v . Find: 0, y 2
Using the equation
2
v y v y 2 g ( y y0 )
gives:
2
v0 ,y v y 2 g(y y0 ) (0 m/s) 2 2(9.80 m/s 2 )(0.75 m) 3.83 m/s (b) To calculate the x-direction information, remember that the time is the same in the x- and y-directions. Calculate the time from the 41
College Physics
Student Solutions Manual
Chapter 3
y-direction information, then use it to calculate the x-direction information: Calculate the time:
v y v0, y gt , so that t
v0 ,y v y g
(3.83 m/s) (0 m/s) 0.391 s 9.80 m/s 2
Now, calculate the horizontal distance he travels to the basket:
x x0 v x t , so that x x0 v x t 5.00 m/s 0.391 s 1.96 m So, he must leave the ground 1.96 m before the basket to be at his maximum height when he reaches the basket.
3.5 ADDITION OF VELOCITIES 54.
Near the end of a marathon race, the first two runners are separated by a distance of 45.0 m. The front runner has a velocity of 3.50 m/s, and the second a velocity of 4.20 m/s. (a) What is the velocity of the second runner relative to the first? (b) If the front runner is 250 m from the finish line, who will win the race, assuming they run at constant velocity? (c) What distance ahead will the winner be when she crosses the finish line?
Soluti on
(a) To keep track of the runners, let’s label F for the first runner and S
v 3.50 m/s, vS 4.20 m/s. for the second runner. Then we are given: F To calculate the velocity of the second runner relative to the first, subtract the velocities: 42
College Physics
Student Solutions Manual
vSF vS vF 4.20 m/s 3.50 m/s 0.70 m/s
Chapter 3
faster than first runner
(b) Use the definition of velocity to calculate the time for each runner separately. For the first runner, she runs 250 m at a velocity of
tF 3.50 m/s:
x F 250 m 71.43 s v F 3.50 m/s
For the second runner, she runs 45 m father than the first runner
tS at a velocity of 4.20 m/s:
t So, since S
xS 250 45 m 70.24 s v S 4.20 m/s
t F , the second runner will win.
(c) We can calculate their relative position, using their relative velocity and time of travel. Initially, the second runner is 45 m behind, the relative velocity was found in part (a), and the time is the time for the second runner, so:
xSF xO,SF vSF tS 45.0 m 0.70 m/s 70.24 s 4.17 m
43
College Physics
62.
Student Solutions Manual
Chapter 3
The velocity of the wind relative to the water is crucial to sailboats. Suppose a sailboat is in an ocean current that has a velocity of 2.20
30.0°
m/s in a direction east of north relative to the Earth. It encounters a wind that has a velocity of 4.50 m/s in a direction of
50.0° south of west relative to the Earth. What is the velocity of the wind relative to the water?
Soluti on
In order to calculate the velocity of the wind relative to the ocean, we need to add the vectors for the wind and the ocean together, being careful to use vector addition. The velocity of the wind relative to the ocean is equal to the velocity of the wind relative to the earth plus the velocity of the earth relative to the ocean. Now,
v WO v WE v EO v WE v OE
.
The first subscript is the object, the second is what it is relative to. In other words the velocity of the earth relative to the ocean is the opposite of the velocity of the ocean relative to the earth.
To solve this vector equation, we need to add the x- and y-
44
College Physics
Student Solutions Manual
Chapter 3
components separately.
v WOx v WEx vOEx 4.50 m/s cos 50 2.20 m/s cos 60 3.993 m/s
v WOy v WEy vOEy 4.50 m/s sin 50 2.20 m/s sin 60 5.352 m/s
Finally, we can use the equations below to calculate the velocity of the water relative to the ocean: 2
2
v v x v y (-3.993 m/s) 2 (-5.352 m/s ) 2 6.68 m/s α tan 1
vy vx
5.352 m/s 53.3 S of W 3.993 m/s
tan 1
66.
25.0
A ship sailing in the Gulf Stream is heading west of north at a speed of 4.00 m/s relative to the water. Its velocity relative to the
4.80 m/s 5.00
Earth is west of north. What is the velocity of the Gulf Stream? (The velocity obtained is typical for the Gulf Stream a few hundred kilometers of the east coast of the United States.)
45
College Physics
Soluti on
Student Solutions Manual
Chapter 3
To calculate the velocity of the water relative to the earth, we need to add the vectors. The velocity of the water relative to the earth is equal to the velocity of the water relative to the ship plus the velocity of the ship relative to the earth.
v WE v WS v SE v SW v SE Now, we need to calculate the x- and y-components separately:
v WEx vSWx vSEx 4.00 m/s cos 115 4.80 m/s cos 95 1.272 m/s
v WEy vSWy vSEy 4.00 m/s sin 115 4.80 m/s sin 95 1.157 m/s vg vgx
vgy N 4.8 m/s
4 m/s 20°
5°
Finally, we use the equations below to calculate the velocity of the water relative to the earth:
v WE v 2 WE,x v 2 WE,y (1.272 m/s) 2 (1.157 m/s) 2 1.72 m/s v WE,y
α tan 1
v WE,x
tan 1
1.157 m/s 42.3 N of E. 1.272 m/s
46
College Physics
Student Solutions Manual
Chapter 4
CHAPTER 4: DYNAMICS: FORCE AND NEWTON’S LAWS OF MOTION 4.3 NEWTON’S SECOND LAW OF MOTION: CONCEPT OF A SYSTEM 1. A 63.0-kg sprinter starts a race with an acceleration of What is the net external force on him?
4.20 m/s 2 .
Solutio n
The net force acting on the sprinter is given by
7.
(a) If the rocket sled shown in Figure 4.31 starts with only one rocket burning, what is its acceleration? Assume that the mass of the system is 2100 kg, and the force of friction opposing the motion is known to be 650 N. (b) Why is the acceleration not one-fourth of what it is with all rockets burning?
net F = ma = (63.0 kg)(4.20 m/s²) 265 N
47
College Physics
Solutio n
Student Solutions Manual
Chapter 4
(a) Use the thrust given for the rocket sled in Figure 4.8,
T 2.59 104 N . With only one rocket burning, net F T f so that Newton’s second law gives:
net F T f 2.59 10 4 N 650 N a 12.0 m/s 2 m m 2100 kg (b) The acceleration is not one-fourth of what it was with all rockets burning because the frictional force is still as large as it was with all rockets burning.
13.
Solutio n
The weight of an astronaut plus his space suit on the Moon is only 250 N. How much do they weigh on Earth? What is the mass on the Moon? On Earth?
wMoon mg Moon m
wMoon 250 N 150 kg g Moon 1.67 m/s 2
wEarth mg Earth 150 kg 9.8 m/s 2 1470 N 1.5 10 3 N Mass does not change. The astronaut’s mass on both Earth and the Moon is 150 kg.
4.6 PROBLEM-SOLVING STRATEGIES 25.
Calculate the force a 70.0-kg high jumper must exert on the ground to produce an upward acceleration 4.00 times the acceleration due to gravity. Explicitly show how you follow the steps in the ProblemSolving Strategy for Newton’s laws of motion.
48
College Physics
Soluti on
Student Solutions Manual
Chapter 4
Step 1. Use Newton’s Laws of Motion.
2 2 a 4 . 00 g (4.00)(9.8 0 m/s ) 39 . 2 m/s ; m 70.0 kg Step 2. Given:
Find
F.
Step 3.
F F w ma, so that F ma w ma mg m(a g )
F (70.0 kg)[(39.2 m/s 2 ) (9.80 m/s 2 )] 3.43 10 3 N The force exerted by the high-jumper is actually down on the ground, but
F is up from the ground to help him jump.
Step 4. This result is reasonable, since it is quite possible for a
person to exert a force of the magnitude of
49
10 3 N .
College Physics
30.
Student Solutions Manual
Chapter 4
F F (a) Find the magnitudes of the forces 1 and 2 that add to give the F
total force tot shown in Figure 4.35. This may be done either graphically or by using trigonometry. (b) Show graphically that the same total force is obtained independent of the order of addition of
F1
F and 2 . (c) Find the direction and magnitude of some other pair of
F vectors that add to give tot . Draw these to scale on the same drawing used in part (b) or a similar picture. Soluti on
F2
(a) Since
is the
y -component of the total force:
F2 Ftot sin 35 (20 N)sin35 11.47 N 11 N And
F1
is the
.
x -component of the total force:
F1 Ftot cos35 (20 N)cos35 16.38 N 16 N
.
F1 F2
(b)
Ftot 35°
is the same as:
(c) For example, use vectors as shown in the figure.
50
College Physics
Student Solutions Manual
F2'
Ftot 15° 20°
Chapter 4
F1'
F1 is at an angle of 20 from the horizontal, with a magnitude of F1cos20 F1
F1
F1 16.38 N 17.4 N 17 N cos20 cos20
F2 is at an angle of 90 from the horizontal, with a magnitude of F2 F2 F1sin 20 5.2 N 33.
What force is exerted on the tooth in Figure 4.38 if the tension in the wire is 25.0 N? Note that the force applied to the tooth is smaller than the tension in the wire, but this is necessitated by practical considerations of how force can be applied in the mouth. Explicitly show how you follow steps in the Problem-Solving Strategy for Newton’s laws of motion.
Soluti on
Step 1: Use Newton’s laws since we are looking for forces. Step 2: Draw a free body diagram:
51
College Physics
Student Solutions Manual
Step 3: Given
T 25.0 N, find Fapp . Using Newton’s laws gives Σ Fy 0,
so that the applied force is due to the
tensions:
The
Chapter 4
y -components of the two
Fapp 2T sin 2 25.0 N sin 15 12.9 N
x -components of the tension cancel. Fx 0
Step 4: This seems reasonable, since the applied tensions should be greater than the force applied to the tooth.
34.
Figure 4.39 shows Superhero and Trusty Sidekick hanging motionless from a rope. Superhero’s mass is 90.0 kg, while Trusty Sidekick’s is 55.0 kg, and the mass of the rope is negligible. (a) Draw a free-body diagram of the situation showing all forces acting on Superhero, Trusty Sidekick, and the rope. (b) Find the tension in the rope above Superhero. (c) Find the tension in the rope between Superhero and Trusty Sidekick. Indicate on your free-body diagram the system of interest used to solve each part.
52
College Physics
Student Solutions Manual
Chapter 4
Soluti on
(a)
(b) Using the upper circle of the diagram,
F
y
0
, so that
T ' T wB 0 . Using the lower circle of the diagram,
F
y
Next, write the weights in terms of masses:
0
, giving
wB mB g , wR mR g .
Solving for the tension in the upper rope gives:
T ' T wB wR wB mR g mB g g (mR mB ) Plugging in the numbers gives:
T ' 9.80 m/s 2 55.0 kg 90.0 kg 1.42 10 3 N 53
T wR 0 .
College Physics
Student Solutions Manual
F Using the lower circle of the diagram, net
Chapter 4
y
0
T wR 0 . Again, write
, so that
the weight in terms of mass: Solving for the tension in the lower rope gives:
wR m R g .
T mR g (55.0 kg) 9.80 m/s 2 539 N
4.7 FURTHER APPLICATIONS OF NEWTON’S LAWS OF MOTION 46.
Integrated Concepts A basketball player jumps straight up for a ball. To do this, he lowers his body 0.300 m and then accelerates through this distance by forcefully straightening his legs. This player leaves the floor with a vertical velocity sufficient to carry him 0.900 m above the floor. (a) Calculate his velocity when he leaves the floor. (b) Calculate his acceleration while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.300 m. (c) Calculate the force he exerts on the floor to do this, given that his mass is 110 kg.
Soluti on
(a) After he leaves the ground, the basketball player is like a projectile. Since he reaches a maximum height of 0.900 m,
v 2 v02 2 g ( y y0 ),
with
y y 0 0.900 m, and v 0 m/s. 54
Solving for the
College Physics
Student Solutions Manual
Chapter 4
initial velocity gives:
v0 [2 g y y0 ]1/2 [2(9.80 m/s 2 )(0.900 m)]1/2 4.20 m/s (b) Since we want to calculate his acceleration, use
v 2 v02 2a y y0 ,
y y0 0.300 m, v where and since he starts from rest, 0 Solving for the acceleration gives:
0 m/s.
v2 (4.20 m/s) 2 a 29.4 m/s 2 2( y y0 ) (2)(0.300 m)
(c) Now, we must draw a free body diagram in order to calculate the force exerted by the basketball player to jump. The net force is equal to the mass times the acceleration:
net F ma F w F mg So, solving for the force gives:
F ma mg m a g 110 kg(29.4 m/s 2 9.80 m/s 2 ) 4.31103 N
55
College Physics
49.
Student Solutions Manual
Chapter 4
Integrated Concepts An elevator filled with passengers has a mass of 1700 kg. (a) The elevator accelerates upward from rest at
1.20 m/s 2
a rate of for 1.50 s. Calculate the tension in the cable supporting the elevator. (b) The elevator continues upward at constant velocity for 8.50 s. What is the tension in the cable during this time? (c) The elevator decelerates at a rate of
0.600 m/s 2
for 3.00 s. What is the tension in the cable during deceleration? (d) How high has the elevator moved above its original starting point, and what is its final velocity?
Soluti on
T
m
(a)
w
The net force is due to the tension and the weight:
net F ma T w T mg, and m 1700 kg . a 1.20 m/s 2 , so the tension is : T m a g (1700 kg)(1.20 m/s 2 9.80 m/s 2 ) 1.87 10 4 N 2 a 0 m/s , (b)
so the tension is:
T w mg (1700 kg)(9.80 m/s 2 ) 1.67 104 N 56
College Physics
Student Solutions Manual
Chapter 4
a 0.600 m/s 2 , but down : (c)
T m g a (1700 kg)(9.80 m/s 2 0.600 m/s 2 ) 1.56 10 4 N v3
t3
v2
t2
v1
t1
(d)
Use
y3 y2 y1
1 y y 0 v 0 t at 2 and v v 0 at. 2
For part (a),
v0 0 m/s, a 1.20 m/s 2 , t 150 s,
1 1 y1 a1t12 (1.20 m/s 2 )(1.50 s)2 1.35 m 2 2
given
and
v1 a1t1 (1.20 m/s 2 )(1.50 s) 1.80 m/s .
v For part (b), 0
v 1.80 m/s, a 0 m/s, t 8.50 s,
so
y1 v1t 2 (1.80 m/s )(8.50 s) 15.3 m . For part (c),
v0 1.80 m/s, a 0.600 m/s 2 , t 3.00 s ,
57
so that:
College Physics
Student Solutions Manual
Chapter 4
y 3 v 2 t a3t 32 (1.80 m/s )(3.00 s) 0.5(0.600 m/s )(3.00 s) 2 2.70 m v3 v 2 a3t 3 1.80 m/s (-0.600 m/s 2 )(3.00 s) 0 m/s Finally, the total distance traveled is
y1 y 2 y3 1.35 m 15.3 m 2.70 m 19.35 m 19.4 m And the final velocity will be the velocity at the end of part (c), or
vfinal 0 m/s 51.
.
Unreasonable Results A 75.0-kg man stands on a bathroom scale in an elevator that accelerates from rest to 30.0 m/s in 2.00 s. (a) Calculate the scale reading in newtons and compare it with his weight. (The scale exerts an upward force on him equal to its reading.) (b) What is unreasonable about the result? (c) Which premise is unreasonable, or which premises are inconsistent?
Soluti on
(a)
Using
v vo at
a gives:
v v 0 30.0 m/s 0 m/s 15.0 m/s 2 t 2.00 s .
Now, using Newton’s laws gives
58
net F F w ma , so that
College Physics
Student Solutions Manual
Chapter 4
F m a g 75.0 kg 15.0 m/s 2 9.80 m/s 2 1860 N . The ratio of the force to the weight is then:
F m(a g ) 15.0 m/s 2 9.80 m/s 2 2.53 2 w mg 9.80 m/s (b) The value (1860 N) is more force than you expect to experience on an elevator.
a 15.0 m/s 2 1.53g
(c) The acceleration is much higher than any standard elevator. The final speed is too large (30.0 m/s is VERY fast)! The time of 2.00s is not unreasonable for an elevator.
59
College Physics
Student Solutions Manual
Chapter 5
CHAPTER 5: FURTHER APPLICATION OF NEWTON’S LAWS: FRICTION, DRAG, AND ELASTICITY 5.1 FRICTION
8.
Show that the acceleration of any object down a frictionless incline
that makes an angle with the horizontal is this acceleration is independent of mass.)
60
a g sin . (Note that
College Physics
Soluti on
Student Solutions Manual
The component of
Chapter 5
w down the incline leads to the acceleration:
wx net Fx ma mg sin so that a g sin
The component of
w force. y
w perpendicular to the incline equals the normal
net Fy 0 N mg sin
14. Calculate the maximum acceleration of a car that is heading up a
4
4
slope (one that makes an angle of with the horizontal) under the following road conditions. Assume that only half the weight of the car is supported by the two drive wheels and that the coefficient of static friction is involved—that is, the tires are not allowed to slip during the acceleration. (Ignore rolling.) (a) On dry concrete. (b) On wet concrete. (c) On ice, assuming that shoes on ice.
61
s 0.100 , the same as for
College Physics
Student Solutions Manual
Chapter 5
Soluti on
Take the positive x-direction as up the slope. For max acceleration,
1 net Fx ma f wx s mg cos mg sin 2
1 s cos sin 2
a g So the maximum acceleration is:
(a)
(b)
s 1.00, a 9.80 m/s 2
1 1.00 cos4 sin4 4.20 m/s 2 2
s 0.700, a 9.80 m/s 2
1 0.700 cos4 sin4 2.74 m/s 2 2
62
College Physics
(c)
Student Solutions Manual
Chapter 5
s 0.100, a 9.80 m/s 2
1 0.100 cos4 sin4 0.195 m/s 2 2
The negative sign indicates downwards acceleration, so the car cannot make it up the grade.
5.3 ELASTICITY: STRESS AND STRAIN
29.
During a circus act, one performer swings upside down hanging from a trapeze holding another, also upside-down, performer by the legs. If the upward force on the lower performer is three times her weight, how much do the bones (the femurs) in her upper legs stretch? You may assume each is equivalent to a uniform rod 35.0 cm long and 1.80 cm in radius. Her mass is 60.0 kg.
Solutio n Use the equation
L
1F L0 Y A , where
Y 1.61010 N/m 2 (from Table 5.3),
L0 0.350 m A r 2 0.0180 m 2 1.018 103 m 2 , , and Ftot 3w 3 60.0 kg 9.80 m/s 2 1764 N , so that the force on each leg is Fleg Ftot / 2 882 N.
Substituting in the value gives:
63
College Physics
L
Student Solutions Manual
Chapter 5
882 N 0.350 m 1.90 105 m. 1 1.6 1010 N/m 2 1.018 10 -3 m 2
3 1.90 10 cm. So each leg is stretched by
35.
As an oil well is drilled, each new section of drill pipe supports its own weight and that of the pipe and drill bit beneath it. Calculate the stretch in a new 6.00 m length of steel pipe that supports 3.00 km of pipe having a mass of 20.0 kg/m and a 100-kg drill bit. The pipe is equivalent in strength to a solid cylinder 5.00 cm in diameter.
64
College Physics
Student Solutions Manual
Solutio n
L
Chapter 5
1F L0 , where L0 6.00 m, Y 1.6 1010 N/m 2 YA . To
Use the equation calculate the mass supported by the pipe, we need to add the mass of the new pipe to the mass of the 3.00 km piece of pipe and the mass of the drill bit:
m mp m3 km mbit
6.00 m 20.0 kg/m 3.00 103 m 20.0 kg/m 100 kg 6.022 10 4 kg So that the force on the pipe is:
F w mg 6.022 10 4 kg 9.80 m/s 2 5.902 10 5 N Finally the cross sectional area is given by: 2
0.0500 m 3 2 A r 1.963 10 m 2 2
Substituting in the values gives:
1 5.902 10 5 N 6.00 m 8.59 10 3 m 8.59 mm L 11 2 -3 2 2.10 10 N/m 1.963 10 m
65
College Physics
41.
Student Solutions Manual
Chapter 5
A farmer making grape juice fills a glass bottle to the brim and caps it tightly. The juice expands more than the glass when it warms up, in
V / V0 2 10 3
such a way that the volume increases by 0.2% (that is, ) relative to the space available. Calculate the force exerted by the 9 2 1.8 10 N/m juice per square centimeter if its bulk modulus is ,
assuming the bottle does not break. In view of your answer, do you think the bottle will survive?
Solutio n
V Using the equation
1F V0 BA
gives:
F V B 1.8 109 N/m 2 2 10 3 3.6 10 6 N/m 2 4 10 6 N/m 2 4 10 2 N/cm 2 A V0
5 2 1 atm 1.013 10 N/m Since , the pressure is about 36 atmospheres, far
greater than the average jar is designed to withstand.
66
College Physics
Student Solutions Manual
Chapter 6
CHAPTER 6: UNIFORM CIRCULAR MOTION AND GRAVITATION 6.1 ROTATION ANGLE AND ANGULAR VELOCITY 1.
Semi-trailer trucks have an odometer on one hub of a trailer wheel. The hub is weighted so that it does not rotate, but it contains gears to count the number of wheel revolutions—it then calculates the distance traveled. If the wheel has a 1.15 m diameter and goes through 200,000 rotations, how many kilometers should the odometer read?
Soluti on
Given:
d 1.15 m r
Find
s
using
1.15 m 2 rad 0.575 m , 200,000 rot 1.257 10 6 rad 2 1 rot
s r , so that
s r 1.257 10 6 rad 0.575 m 7.226 1 0 5 m 723 km 7.
A truck with 0.420 m radius tires travels at 32.0 m/s. What is the angular velocity of the rotating tires in radians per second? What is this in rev/min?
67
College Physics
Soluti on
Given:
Student Solutions Manual
Chapter 6
r 0.420 m, v 32.0 m s .
v 32.0 m s 76.2 rad s. r 0 . 420 m Use Convert to rpm by using the conversion factor:
1 rev 2 rad , 1 rev 60 s 2 rad 1 min 728 rev s 728 rpm
76.2 rad s
6.2 CENTRIPETAL ACCELERATION 18.
Verify that the linear speed of an ultracentrifuge is about 0.50 km/s, and Earth in its orbit is about 30 km/s by calculating: (a) The linear speed of a point on an ultracentrifuge 0.100 m from its center, rotating at 50,000 rev/min. (b) The linear speed of Earth in its orbit about the Sun (use data from the text on the radius of Earth’s orbit and approximate it as being circular).
68
College Physics
Soluti on
Student Solutions Manual
(a) Use
v r
Chapter 6
to find the linear velocity:
2 rad 1 min v r 0.100 m 50,000 rev/min 524 m/s 0.524 km/s 1 rev 60 s
2 (b) Given:
Use
v r
rad 1y 1.988 10 7 rad s ; r 1.496 1011 m 7 y 3.16 10 s
to find the linear velocity:
v r 1.496 1011 m 1.988 10-7 rad s 2.975 10 4 m s 29.7 km s 6.3 CENTRIPETAL FORCE 26.
What is the ideal speed to take a 100 m radius curve banked at a 20.0° angle?
Soluti on Using
v2 tan rg
gives:
v2 tan v rgtan 100 m 9.8 m s 2 tan 20.0 18.9 m s rg 6.5 NEWTON’S UNIVERSAL LAW OF GRAVITATION
69
College Physics
33.
Student Solutions Manual
Chapter 6
(a) Calculate Earth’s mass given the acceleration due to gravity at 2 9 . 830 m/s the North Pole is and the radius of the Earth is 6371 km
from pole to pole. (b) Compare this with the accepted value of
5.979 10 24 kg . Soluti on
g (a) Using the equation
GM r2
gives:
2
GM r 2 g 6371 10 3 m 9.830 m s 2 g 2 M 5.979 10 24 kg 11 2 2 G r 6.673 10 N m kg (b) This is identical to the best value to three significant figures.
39.
Astrology, that unlikely and vague pseudoscience, makes much of the position of the planets at the moment of one’s birth. The only known force a planet exerts on Earth is gravitational. (a) Calculate the gravitational force exerted on a 4.20 kg baby by a 100 kg father 0.200 m away at birth (he is assisting, so he is close to the child). (b) Calculate the force on the baby due to Jupiter if it is at its closest 11 6 . 29 10 m distance to Earth, some
away. How does the force of Jupiter on the baby compare to the force of the father on the baby? Other objects in the room and the hospital building also exert similar gravitational forces. (Of course, there could be an unknown force acting, but scientists first need to be convinced that there is even an efect, much less that an unknown force causes it.)
70
College Physics
Student Solutions Manual
Soluti on
F (a) Use
Chapter 6
GMm r 2 to calculate the force:
GMm 6.673 10 11 N m 2 kg 2 100 kg 4.20 kg Ff 2 7.01 10 7 N 2 r 0.200 m (b) The mass of Jupiter is:
mJ 1.90 10 27 kg FJ
6.673 10
11
N m 2 kg 2 1.90 10 27 kg 4.20 kg
6.29 10 m 11
2
1.35 10 6 N
Ff 7.01 10-7 N 0.521 FJ 1.35 10 -6 N
6.6 SATELLITES AND KEPLER’S LAWS: AN ARGUMENT FOR SIMPLICITY 45.
Find the mass of Jupiter based on data for the orbit of one of its moons, and compare your result with its actual mass.
Soluti on Using
r3 G M T 2 4 2 , we can solve the mass of Jupiter:
4 2 r 3 MJ G T2
3
4 2 4.22 10 8 m 6.673 10 -11 N m 2 kg 2 0.00485 y 3.16 10 7 s y
71
2
1.89 10 27 kg
College Physics
Student Solutions Manual
Chapter 6
This result matches the value for Jupiter’s mass given by NASA.
48.
Integrated Concepts Space debris left from old satellites and their launchers is becoming a hazard to other satellites. (a) Calculate the speed of a satellite in an orbit 900 km above Earth’s surface. (b) Suppose a loose rivet is in an orbit of the same radius that intersects
90
the satellite’s orbit at an angle of relative to Earth. What is the velocity of the rivet relative to the satellite just before striking it? (c) Given the rivet is 3.00 mm in size, how long will its collision with the satellite last? (d) If its mass is 0.500 g, what is the average force it exerts on the satellite? (e) How much energy in joules is generated by the collision? (The satellite’s velocity does not change appreciably, because its mass is much greater than the rivet’s.)
Soluti on
(a) Use
Fc mac
, then substitute using
GmM mv 2 r r2 GM E v rS
6.673 10
11
v2 a r
F and
GmM . r2
N m 2 kg 2 5.979 10 24 kg 2.11 10 4 m s 3 900 10 m
(b) In the satellite’s frame of reference, the rivet has two
72
College Physics
Student Solutions Manual
perpendicular velocity components equal to
Chapter 6
v from part (a):
v tot v 2 v 2 2v 2 2 2.105 10 4 m s 2.98 10 4 m s
(c) Using kinematics:
(d)
d 3.00 103 m d vtott t 1.0110 7 s 4 vtot 2.98 10 m s
p mvtot 0.500 10 3 kg 2.98 104 m s F 1.48 108 N -7 t t 1.0110 s
(e) The energy is generated from the rivet. In the satellite’s frame of
v vtot , and vf reference, i of the rivet is:
0.
So, the change in the kinetic energy
2 1 1 2 1 2 KE mvtot mvi 0.500 103 kg 2.98 10 4 m s 0 J 2.22 105 J 2 2 2
73
College Physics
Student Solutions Manual
Chapter 7
CHAPTER 7: WORK, ENERGY, AND ENERGY RESOURCES 7.1 WORK: THE SCIENTIFIC DEFINITION 1.
Soluti on
How much work does a supermarket checkout attendant do on a can of soup he pushes 0.600 m horizontally with a force of 5.00 N? Express your answer in joules and kilocalories.
Using
W fd cos( ) , where F 5.00 N, d 0.600 m and since the force is
applied horizontally,
0 : W Fdcosθ (5.00 N) (0.600 m) cos0 3.00 J
Using the conversion factor
W 3.00 J
7.
1 kcal 4186 J
gives:
1 kcal 7.17 10 4 kcal 4186 J
A shopper pushes a grocery cart 20.0 m at constant speed on level ground, against a 35.0 N frictional force. He pushes in a direction below the horizontal. (a) What is the work done on the cart by friction? (b) What is the work done on the cart by the gravitational force? (c) What is the work done on the cart by the shopper? (d) Find the force the shopper exerts, using energy considerations. (e) What is the total work done on the cart?
Soluti on
(a) The work done by friction is in the opposite direction of the
74
College Physics
Student Solutions Manual
motion, so
Chapter 7
180, and therefore
Wf Fdcosθ 35.0 N 20.0 m cos180 700 J (b) The work done by gravity is perpendicular to the direction of motion, so
90, and Wg Fdcosθ 35.0 N 20.0 m cos90 0 J
(c) If the cart moves at a constant speed, no energy is transferred to it, from the work-energy theorem:
(d) Use the equation
force:
F
Ws Fdcosθ
net W Ws Wf 0, or Ws 700 J
, where
25, and solve for the
Ws 700 J 38.62 N 38.6 N d cosθ 20.0 m cos25
(e) Since there is no change in speed, the work energy theorem says that there is no net work done on the cart:
net W Wf Ws 700 J 700 J 0 J 7.2 KINETIC ENERGY AND THE WORK-ENERGY THEOREM 13.
A car’s bumper is designed to withstand a 4.0-km/h (1.1-m/s) collision with an immovable object without damage to the body of the car. The bumper cushions the shock by absorbing the force over a distance. Calculate the magnitude of the average force on a bumper that collapses 0.200 m while bringing a 900-kg car to rest from an initial speed of 1.1 m/s.
75
College Physics
Student Solutions Manual
Soluti on Use the work energy theorem,
Chapter 7
1 1 2 net W mv 2 mv0 Fdcosθ 2 2 ,
2
mv 2 mv0 (900 kg) (0 m/s) 2 (900 kg) (1.12 m/s) 2 F 2.8 10 3 N 2dcosθ 2 (0.200 m) cos0 The force is negative because the car is decelerating.
7.3 GRAVITATIONAL POTENTIAL ENERGY 16.
A hydroelectric power facility (see Figure 7.38) converts the gravitational potential energy of water behind a dam to electric energy. (a) What is the gravitational potential energy relative to the 3 13 50 . 0 km mass 5 . 00 10 kg ), given generators of a lake of volume (
that the lake has an average height of 40.0 m above the generators? (b) Compare this with the energy stored in a 9-megaton fusion bomb. Soluti on
(a) Using the equation
ΔPE g mgh,
where
m 5.00 1013 kg, g 9.80 m/s 2 , and h 40.0 m,
gives:
ΔPE g (5.00 1013 kg) (9.80 m/s 2 ) (40.0 m) 1.96 1016 J (b) From Table 7.1, we know the energy stored in a 9-megaton fusion
3.8 1016 J
E lake 1.96 1016 J 0.52. E bomb 3.8 1016 J
bomb is , so that The energy stored in the lake is approximately half that of a 9-megaton fusion bomb.
76
College Physics
Student Solutions Manual
Chapter 7
7.7 POWER 30.
The Crab Nebula (see Figure 7.41) pulsar is the remnant of a supernova that occurred in A.D. 1054. Using data from Table 7.3, calculate the approximate factor by which the power output of this astronomical object has declined since its explosion.
Soluti on From Table 7.3:
PCrab 10 28 W, and PSupernova 5 10 37 W
P 10 28W 2 10 10 . 37 P0 5 10 W
so that
10 10 This power today is
orders of magnitude smaller than it was at the time of the explosion. 36.
(a) What is the average useful power output of a person who does
6.00 10 6 J
of useful work in 8.00 h? (b) Working at this rate, how long will it take this person to lift 2000 kg of bricks 1.50 m to a platform? (Work done to lift his body can be omitted because it is not considered useful output here.)
77
College Physics
Soluti on
Student Solutions Manual
P (a) Use
W t
Chapter 7
(where t is in seconds!):
W 6.00 10 6 J P 208.3 J/s 208 W t (8.00 h)(3600 s/1h) (b) Use the work energy theorem to express the work needed to lift
W mgh
the bricks: , where to solve for the time:
m 2000 kg and h 1.50 m . Then use
P
W t
W mgh mgh (2000 kg)(9.80 m/s 2 )(1.50 m) P t 141.1 s 141 s t t P (208.3 W) 42.
2.00
Calculate the power output needed for a 950-kg car to climb a slope at a constant 30.0 m/s while encountering wind resistance and friction totaling 600 N. Explicitly show how you follow the steps in the Problem-Solving Strategies for Energy. Soluti on
The energy supplied by the engine is converted into frictional energy as the car goes up the incline.
P
W Fd d F Fv, t t t
where
F
is parallel to the incline and
F f w 600 N mg sin . Substituting gives P ( f mg sin )v , so that: 78
College Physics
Student Solutions Manual
Chapter 7
P 600 N (950 kg)(9.80 m/s 2 )sin2 (30.0 m/s) 2.77 10 4 W 7.8 WORK, ENERGY, AND POWER IN HUMANS 46.
Calculate the power output in watts and horsepower of a shot-putter who takes 1.20 s to accelerate the 7.27-kg shot from rest to 14.0 m/s, while raising it 0.800 m. (Do not include the power produced to accelerate his body.)
Soluti on
Use the work energy theorem to determine the work done by the shot-putter:
1 1 2 net W mv 2 mgh mv 0 mgh0 2 2 1 (7.27 kg) (14.0 m/s) 2 (7.27 kg) (9.80 m/s 2 ) (0.800 m) 769.5 J 2
P The power can be found using
W t
P :
W 769.5 J 641.2 W 641 W. t 1.20 s
Then, using the conversion 1 hp = 746W, we see that
P 641 W 52.
1 hp 0.860 hp 746 W
Very large forces are produced in joints when a person jumps from some height to the ground. (a) Calculate the force produced if an 80.0-kg person jumps from a 0.600–m-high ledge and lands stiffly, compressing joint material 1.50 cm as a result. (Be certain to include the weight of the person.) (b) In practice the knees bend almost involuntarily to help extend the distance over which you stop. Calculate the force produced if the stopping distance is 0.300 m. (c) Compare both forces with the weight of the person.
79
College Physics
Soluti on
Student Solutions Manual
Given:
Chapter 7
m 80.0 kg, h 0.600 m, and d 0.0150 m
Find: net
F . Using W Fd and the work-energy theorem gives:
W Fj d mgh mgh (80.0 kg) (9.80 m/s 2 ) (0.600) F 3.136 10 4 N. d 0.0150 m Fj
N mg
(a) Now, looking at the body diagram:
net F w Fj
net F (80.0 kg) (9.80 m/s 2 ) 3.136 10 4 N 3.21 10 4 N (b) Now, let
d 0.300 m so that
mgh (80.0 kg) (9.80 m/s 2 ) (0.600) Fj 1568 N. d 0.300 m
net F (80.0 kg)(9.80 m/s 2 ) 1568 N 2.35 10 3 N
(c) In (a),
net F 32,144 N 41.0. mg 784 N
This could be damaging to the body.
80
College Physics
In (b), 58.
Student Solutions Manual
net F 2352 N 3.00. mg 784 N
Chapter 7
This can be easily sustained.
The awe-inspiring Great Pyramid of Cheops was built more than 4500 years ago. Its square base, originally 230 m on a side, covered
7 109 kg
13.1 acres, and it was 146 m high, with a mass of about . (The pyramid’s dimensions are slightly diferent today due to quarrying and some sagging.) Historians estimate that 20,000 workers spent 20 years to construct it, working 12-hour days, 330 days per year. (a) Calculate the gravitational potential energy stored in the pyramid, given its center of mass is at one-fourth its height. (b) Only a fraction of the workers lifted blocks; most were involved in support services such as building ramps (see Figure 7.45), bringing food and water, and hauling blocks to the site. Calculate the efficiency of the workers who did the lifting, assuming there were 1000 of them and they consumed food energy at the rate of 300 kcal/h. What does your answer imply about how much of their work went into block-lifting, versus how much work went into friction and lifting and lowering their own bodies? (c) Calculate the mass of food that had to be supplied each day, assuming that the average worker required 3600 kcal per day and that their diet was 5% protein, 60% carbohydrate, and 35% fat. (These proportions neglect the mass of bulk and nondigestible materials consumed.) Soluti on
(a) To calculate the potential energy use
m 7 10 kg 9
and
PE mgh , where
1 h 146 m 36.5 m : 4
PE mgh (7.00 10 9 kg) (9.80 m/s 2 ) (36.5 m) 2.504 1012 J 2.50 1012 J (b) First, we need to calculate the energy needed to feed the 1000 workers over the 20 years:
81
College Physics
Student Solutions Manual
Ein NPt 1000
Chapter 7
300 kcal 4186 J 330 d 12 h 20 y 9.946 1013 kcal. h kcal y d
Now, since the workers must provide the PE from part (a), use
Eff
Wout Ein
to calculate their efficiency:
Wout PE 2.504 1012 J Eff 0.0252 2.52% Ein Ein 9.946 1013 (c) If each worker requires 3600 kcal/day, and we know the composition of their diet, we can calculate the mass of food required:
E protein (3600 kcal)(0.05 ) 180 kcal; Ecarbohydrate (3600 kcal)(0.60 ) 2160 kcal; and Efat (3600 kcal)(0.35 ) 1260 kcal. Now, from Table 7.1 we can convert the energy required into the mass required for each component of their diet:
1g 1g 180 kcal 43.90 g; 4.1 kcal 4.1 kcal 1g 1g mcarbohydrate Ecarbohydrate 2160 kcal 526.8 g; 4.1 kcal 4.1 kcal 1g 1g mfat Efat 2160 kcal 135.5 g. 9.3 kcal 9.3 kcal mprotein E protein
Therefore, the total mass of food require for the average worker per day is:
mperson mprotein mcarbohydrate mfat (43.90 g) (526.8 g) (135.5 g) 706.2 g, and the total amount of food required for the 20,000 workers is: 82
College Physics
Student Solutions Manual
m Nmperson 20,000 0.7062 kg 1.41 10 4 kg 1.4 10 4 kg
83
Chapter 7
College Physics
Student Solutions Manual
Chapter 8
CHAPTER 8: LINEAR MOMENTUM AND COLLISIONS 8.1 LINEAR MOMENTUM AND FORCE
1.
(a) Calculate the momentum of a 2000-kg elephant charging a
7.50 m/s
hunter at a speed of . (b) Compare the elephant’s momentum with the momentum of a 0.0400-kg tranquilizer dart fired at a speed of at
600 m/s . (c) What is the momentum of the 90.0-kg hunter running 7.40 m/s
after missing the elephant?
84
College Physics
Soluti on (a)
Student Solutions Manual
Chapter 8
pe me ve 2000 kg 7.50 m/s 1.50 10 4 kg m/s p b mb v b 0.0400 kg 600 m/s 24.0 kg.m/s, so
pc 1.50 10 4 kg.m/s 625 p 24.0 kg.m/s (b) b The momentum of the elephant is much larger because the mass of the elephant is much larger.
(c)
pb mh vh 90.0 kg 7.40 m/s 6.66 10 2 kg m/s Again, the momentum is smaller than that of the elephant because the mass of the hunter is much smaller.
8.2 IMPULSE
9.
A person slaps her leg with her hand, bringing her hand to rest in 2.50 milliseconds from an initial speed of 4.00 m/s. (a) What is the average force exerted on the leg, taking the efective mass of the hand and forearm to be 1.50 kg? (b) Would the force be any diferent if the woman clapped her hands together at the same speed and brought them to rest in the same time? Explain why or why not. (a) Calculate the net force on the hand:
Soluti on
85
College Physics
net F
Student Solutions Manual
Chapter 8
p mv 1.50kg 0 m/s 4.00 m/s 2.40 103 N 3 t t 2.50 10 s
(taking moment toward the leg as positive). Therefore, by Newton’s third law, the net force exerted on the leg is toward the leg.
2.40 103 N ,
(b) The force on each hand would have the same magnitude as that found in part (a) (but in opposite directions by Newton’s third law) because the changes in momentum and time interval are the same.
15.
7 1 . 00 10 kg A cruise ship with a mass of
strikes a pier at a speed of 0.750 m/s. It comes to rest 6.00 m later, damaging the ship, the pier, and the tugboat captain’s finances. Calculate the average force exerted on the pier using the concept of impulse. (Hint: First calculate the time it took to bring the ship to rest.)
86
College Physics
Soluti on
Given:
Student Solutions Manual
Chapter 8
m = 1.00 10 7 kg, v0 = 0.75 m/s, v = 0 m/s, Δx 6.00 m.
Find: net force
on the pier. First, we need a way to express the time,
v known quantities. Using the equations
x vt
x t
v and
t , in terms of v0 v 2
gives:
1 v v0 t so that t 2x 2 6.00 m 16.0 s. 2 v v0 0 0.750 m/s
p m v v0 1.00 10 7 kg 0 0750 m/s net F 4.69 105 N. t t 16.0 s By Newton’s third law, the net force on the pier is original direction of the ship.
4.69 105 N , in the
8.3 CONSERVATION OF MOMENTUM
23.
Professional Application Train cars are coupled together by being bumped into one another. Suppose two loaded train cars are moving toward one another, the first having a mass of 150,000 kg and a velocity of 0.300 m/s, and the second having a mass of 110,000 kg
0.120 m/s
and a velocity of . (The minus indicates direction of motion.) What is their final velocity?
87
College Physics
Soluti on
Student Solutions Manual
Use conservation of momentum, final velocities are the same.
v'
Chapter 8
m1v1 m2 v2 m1v1 'm2v2 ' , since their
m1v1 m2 v 2 150,000 kg 0.300 m/s 110,000 kg 0.120 m/s 0.122 m/s m1 m2 150,000 kg 110,000 kg
The final velocity is in the direction of the first car because it had a larger initial momentum.
8.5 INELASTIC COLLISIONS IN ONE DIMENSION
33.
Professional Application Using mass and speed data from Example 8.1 and assuming that the football player catches the ball with his feet of the ground with both of them moving horizontally, calculate: (a) the final velocity if the ball and player are going in the same direction and (b) the loss of kinetic energy in this case. (c) Repeat parts (a) and (b) for the situation in which the ball and the player are going in opposite directions. Might the loss of kinetic energy be related to how much it hurts to catch the pass?
Soluti on
(a) Use conservation of momentum for the player and the ball:
m1v1 m2 v2 m1 m2 v'
so that
88
College Physics
v'
Student Solutions Manual
Chapter 8
m1v1 m2 v 2 110 kg 8.00 m/s 0.410 kg 25.0 m/s 8.063 m/s 8.06 m/s m1 m2 110 kg 0.410 kg
KE KE' KE1 KE 2
1 1 1 1 1 1 m1v'12 m2 v'22 m1v12 m2 v22 m1 m2 v'2 m1v'12 m2 v'22 2 2 2 2 2 2 1 1 2 2 2 110.41 kg 8.063 m/s 110 kg 8.00 m/s 0.400 kg 25.0 m/s 2 2 59.0 J
(b)
v'
110 kg 8.00 m/s 0.410 kg 25.0 m/s 7.88 m/s
(c) (i)
110.41 kg
1 110.41 kg 7.877 m/s 2 2 1 110 kg 8.00 m/s 2 1 0.410 kg 25.0 m/s 2 223 J 2 (ii) 2 KE
89
College Physics
38.
Student Solutions Manual
Chapter 8
A 0.0250-kg bullet is accelerated from rest to a speed of 550 m/s in a 3.00-kg rifle. The pain of the rifle’s kick is much worse if you hold the gun loosely a few centimeters from your shoulder rather than holding it tightly against your shoulder. (a) Calculate the recoil velocity of the rifle if it is held loosely away from the shoulder. (b) How much kinetic energy does the rifle gain? (c) What is the recoil velocity if the rifle is held tightly against the shoulder, making the efective mass 28.0 kg? (d) How much kinetic energy is transferred to the rifle-shoulder combination? The pain is related to the amount of kinetic energy, which is significantly less in this latter situation. (e) See Example 8.1 and discuss its relationship to this problem.
90
College Physics
Soluti on
Student Solutions Manual
v (a) Given: 1
v2 0 m/s, m1 3.00 kg.
Chapter 8
Use conservation of momentum:
m1v1 m2 v2 m1 m2 v'
m1v'1 m2 v' 2 v'1
m2 v' 2 0.0250 kg 550 m/s 4.583 m/s 4.58 m/s m1 3.00 kg
(b) The rifle begins at rest, so
KEi 0 J , and
1 1 2 KE m1v'12 3.00 kg 4.58 m/s 31.5 J 2 2
(c) Now,
v'1
m1 28.0 kg , so that
m2 v 2 0.0250 kg 550 m/s 0.491 m/s m1 28.0 kg
(d) Again,
KEi 0 J , and
1 1 2 KE m1v'12 28.0 kg 0.491 m/s 3.376 J 3.38 J 2 2 91 (e) Example 8.1 makes the observation that if two objects have the
College Physics
Student Solutions Manual
Chapter 8
44.
(a) During an ice skating performance, an initially motionless 80.0-kg clown throws a fake barbell away. The clown’s ice skates allow her to recoil frictionlessly. If the clown recoils with a velocity of 0.500 m/s and the barbell is thrown with a velocity of 10.0 m/s, what is the mass of the barbell? (b) How much kinetic energy is gained by this maneuver? (c) Where does the kinetic energy come from?
Soluti on
(a) Use conversation of momentum to find the mass of the barbell:
m1v1 m2 v2 m1v1 'm2 v2 '
v v 0 m/s
v'
2 where 1 , and 1 =-0.500 m/s (since it recoils backwards), so solving for the mass of the barbell gives:
0 m1v1 m2 v 2 m2
m1v1 80.0 kg 0.500 m/s 4.00kg v2 10.0 m/s
(b) Find the change in kinetic energy:
1 1 1 1 1 KE m1v'12 m2 v' 22 m1v12 m2 v 22 m1v'12 m2 v' 22 2 2 2 2 2 1 1 2 2 80.0 kg 0.500 m/s 4.00 kg 10.0 m/s 210 J 2 2
(c) The clown does work to throw the barbell, so the kinetic energy comes from the muscles of the clown. The muscles convert the chemical potential energy of ATP into kinetic energy.
92
College Physics
Student Solutions Manual
Chapter 8
8.6 COLLISIONS OF POINT MASSES IN TWO DIMENSIONS
49.
Professional Application Ernest Rutherford (the first New Zealander to be awarded the Nobel Prize in Chemistry) demonstrated that nuclei were very small and dense by scattering
He from gold-197 nuclei Au . The energy of the helium-4 nuclei 4
197
13 8 . 00 10 J , and the masses of the incoming helium nucleus was 27 6 . 68 10 kg helium and gold nuclei were
25 3 . 29 10 kg , and
respectively (note that their mass ratio is 4 to 197). (a) If a helium
120
nucleus scatters to an angle of during an elastic collision with a gold nucleus, calculate the helium nucleus’s final speed and the final velocity (magnitude and direction) of the gold nucleus. (b) What is the final kinetic energy of the helium nucleus?
Soluti on (a)
1 2 m1v1 KEi vi 2
2KEi m 1
1/ 2
2 8.00 10 13 J 27 6.68 10 kg
1/ 2
Conservation of internal kinetic energy gives: (i)
1 2 1 2 1 2 m1v1 m1v'1 m1v'2 2 2 2
93
1.548 10 7 m/s
College Physics
or
Student Solutions Manual
Chapter 8
(i’)
m1 2 2 v'1 v' 21 ' v' 22 m2
Conservation of momentum along the x-axis gives:
m1v1 m1v'1 cos 1 m2 v' 2 cos 2
(ii)
Conservation of momentum along the y-axis gives: (iii)
0 m1v'1 sin 1 m2 v'2 sin 2
Rearranging Equations (ii) and (iii) gives:
m1v1 m1v'1 cos 1 m2 v'2 cos 2
(ii’)
(iii’)
m1v'1 sin 1 m2 v'2 sin 2
Squaring Equation (ii’) and (iii’) and adding gives:
m22 v' 22 cos 2 2 m22 v' 22 sin 2 2 (m1v1 m1v'1 cos 1 ) 2 m1v'1 cos 1 or m22 v' 22 m12 v'12 2m12 v1v'1 cos 1 m12 v'12 94
2
College Physics
Student Solutions Manual
Solving for
v'22
Chapter 8
and substituting into (i’):
m1 2 m12 2 2 v1 v'1 2 v1 v'12 2v1v'1 cos 1 so that m2 m2 v12 v'12
m1 2 v1 v'12 2v1v'1 cos 1 m2
7 27 25 v 1 . 548 10 m/s ; 120 ; m 6 . 68 10 kg ; m 3 . 29 10 kg 1 1 1 2 Using
1
m m1 2 m1 v'1 2 v1 cos 1 v'1 1 1 v12 0 m2 m2 m2
a 1
m1 2m 1.0203, b 1 v1 cos 1 3.143 10 5 m/s, m2 m2
m c 1 1 v12 2.348 1014 m 2 /s 2 so that m2
95
College Physics
Student Solutions Manual
b b 2 4ac v'1 2a
3.143 10 5 m/s
3.143 10
v'1 1.50 10 7 m/s and v' 2
Chapter 8
m/s 41.0203 2.348 1014 m 2 /s 2 or 21.0203 5
2
m1 2 v1 v'1 5.36 10 5 m/s m2
v'1 sin 1 1.50 10 7 m/s sin120 tan 2 0.56529 v1 v'1 cos 1 1.58 10 7 m/s 1.50 10 7 m/s cos120
or 2 tan 1 0.56529 29.5
(b) The final kinetic energy is then:
KE f 0.5 m1v'12 0.5 6.68 10 27 kg 1.50 107 m/s 7.52 10 13 J 2
8.7 INTRODUCTION TO ROCKET PROPULSION
55.
Professional Application Calculate the increase in velocity of a 4000-kg space probe that expels 3500 kg of its mass at an exhaust 3 2 . 00 10 m/s . You may assume the gravitational force is velocity of
negligible at the probe’s location.
96
College Physics
Student Solutions Manual
Soluti on
m0 , m
Chapter 8
v v0 ve ln Use the equation
where
m0 = 4000 kg, m = 4000 kg - 3500 kg = 500 kg, and ve = 2.00 103 m/s
so that
4000 kg 4.159 10 3 m/s 4.16 10 3 m/s v v 0 (2.00 10 3 m/s)ln 500 kg
57.
Soluti on
Derive the equation for the vertical acceleration of a rocket.
The force needed to give a small mass
F mam
m
an acceleration
a m
. To accelerate this mass in the small time interval
v
v a t
F ve
t
is at a
m t . By Newton’s third law, this
m , so speed e requires e force is equal in magnitude to the thrust force acting on the rocket,
so
Fthrust ve
m t , where all quantities are positive. Applying Newton’s Fthrust mg ma a
second law to the rocket gives is the mass of the rocket and unburnt fuel. 97
ve m g m t , where
m
College Physics
61.
Soluti on
Student Solutions Manual
Chapter 8
Professional Application (a) A 5.00-kg squid initially at rest ejects 0.250-kg of fluid with a velocity of 10.0 m/s. What is the recoil velocity of the squid if the ejection is done in 0.100 s and there is a 5.00-N frictional force opposing the squid’s movement. (b) How much energy is lost to work done against friction?
(a) First, find
v'1 , the velocity after ejecting the fluid:
m1 m2 v 0 m1v'1 m2 v'2 , so that m v' 0.250 kg 10.0 m/s v' 2 2 0.526 m/s 1
m1
4.75 kg
Now, the frictional force slows the squid over the 0.100 s
p ft m1v1' ,f m2 v2' , gives : ft m2 v2' 5.00 N 0.100 s 0.250 kg 10.0 m/s v 0.421 m/s m1 4.75 kg ' 1,f
1 1 1 KE m1v'12,f m1v'12 m1 v1,2f v'12 2 2 2 1 2 2 4.75 kg 0.421 m/s 0.526 m/s 0.236 J 2 (b)
98
College Physics
Student Solutions Manual
Chapter 9
CHAPTER 9: STATICS AND TORQUE 9.2 THE SECOND CONDITION FOR EQUILIBRIUM 1.
Soluti on
(a) When opening a door, you push on it perpendicularly with a force of 55.0 N at a distance of 0.850m from the hinges. What torque are you exerting relative to the hinges? (b) Does it matter if you push at the same height as the hinges?
r F
, where the perpendicular (a) To calculate the torque use distance is 0.850 m, the force is 55.0 N, and the hinges are the pivot point.
τ r F 0.850 m 55.0 N 46.75 N m 46.8 N m (b) It does not matter at what height you push. The torque depends on only the magnitude of the force applied and the perpendicular distance of the force’s application from the hinges. (Children don’t have a tougher time opening a door because they push lower than adults, they have a tougher time because they don’t push far enough from the hinges.)
9.3 STABILITY
99
College Physics
Student Solutions Manual
Chapter 9
6.
Suppose a horse leans against a wall as in Figure 9.32. Calculate the force exerted on the wall assuming that force is horizontal while using the data in the schematic representation of the situation. Note that the force exerted on the wall is equal and opposite to the force exerted on the horse, keeping it in equilibrium. The total mass of the horse and rider is 500 kg. Take the data to be accurate to three digits.
Soluti on
There are four forces acting on the horse and rider: N (acting straight up the ground), w (acting straight down from the center of mass), f (acting horizontally to the left, at the ground to prevent the horse
from slipping), and
Fwall
(acting to the right). Since nothing is moving,
the two conditions for equilibrium apply:
net F 0 and net τ 0.
The first condition leads to two equations (one for each direction):
net Fx Fwall f 0 and net Fy N w 0 The torque equation (taking torque about the center of where CCW is positive) gives:
net Fwall 1.40 1.20 f 1.40 m N 0.350 m 0
F The first two equations give: wall
f , and N w mg
Substituting into the third equation gives:
Fwall 1.40 m 1.20 m Fwall 1.40 m mg 0.350 m
100
gravity,
College Physics
Student Solutions Manual
Chapter 9
So, the force on the wall is:
mg 0.350 m 500 kg 9.80 m s 2 0.350 m Fwall 1429 N 1.43 10 3 N 1.20 m 1.20 m 14.
A sandwich board advertising sign is constructed as shown in Figure 9.36. The sign’s mass is 8.00 kg. (a) Calculate the tension in the chain assuming no friction between the legs and the sidewalk. (b) What force is exerted by each side on the hinge?
Soluti on
Looking at Figure 9.36, there are three forces acting on the entire sandwich board system:
w , acting down at the center of mass of the
N and N ,
R acting up at the ground for EACH of the legs. The system, L tension and the hinge exert internal forces, and therefore cancel when considering the entire sandwich board. Using the first condition
for equilibrium gives:
net F N L N R wS
.
The normal forces are equal, due to symmetry, and the mass is given, so we can determine the normal forces:
2 N mg 8.00 kg 9.80 m s 2 N 39.2 N Now, we can determine the tension in the chain and the force due to the hinge by using the one side of the sandwich board:
101
College Physics
Student Solutions Manual
Chapter 9
1.10 1.30 m 0.550 m, b 0.650 m, c 0.500 m, d 1.30 m, 2 2 8.00 kg N 39.2 N, w mg 9.80 m s 2 39.2 N (for one side) 2 Frv Fr sin , Frh Fr cos a
The system is in equilibrium, so the two conditions for equilibrium hold:
net F 0 and net 0 This gives three equations:
net Fx Frh T 0 net Fy Frv w N 0 a net Tc w Na 0 2 (Pivot at hinge)
102
College Physics
Student Solutions Manual
Chapter 9
Giving Frh T Fr cos , Frv Fr sin , Frh Fr cos a Frv w N Fr sin , and Tc w Na 2 (a) To solve for the tension, use the third equation:
a Na wa wa Tc Na w T 2 c 2c 2c Since N w Therefore, substituting in the values gives:
T
39.2 N 0.550 m 21.6 N 2 0.500 m
(b) To determine the force of the hinge, and the angle at which it acts, start with the second equation, remembering that
N w , Frv w N Frv 0. Now, the first equation says:
rather
Frh T ,
so
Fr
cannot be zero, but
0 , giving a force of Fr 21.6 N (acting horizontal ly)
9.6 FORCES AND TORQUES IN MUSCLES AND JOINTS
103
College Physics
Student Solutions Manual
Chapter 9
32.
Even when the head is held erect, as in Figure 9.42, its center of mass is not directly over the principal point of support (the atlantooccipital joint). The muscles at the back of the neck should therefore exert a force to keep the head erect. That is why your head falls forward when you fall asleep in the class. (a) Calculate the force exerted by these muscles using the information in the figure. (b) What is the force exerted by the pivot on the head?
Soluti on
(a) Use the second condition for equilibrium:
net FM 0.050 m w 0.025 m 0, so that FM w
0.025 m 0.025 m 50 N 25 N downward 0.050 m 0.050 m
(b) To calculate the force on the joint, use the first condition of
net Fy FJ FM w 0 , so that equilibrium:
FJ FM w 25 N 50 N 75 N upward
104
College Physics
Student Solutions Manual
Chapter 10
CHAPTER 10: ROTATIONAL MOTION AND ANGULAR MOMENTUM 10.1 ANGULAR ACCELERATION 1.
At its peak, a tornado is 60.0 m in diameter and carries 500 km/h winds. What is its angular velocity in revolutions per second?
Soluti on
v First, convert the speed to m/s:
Then, use the equation
v r
500 km 1 h 1000 m 138.9 m/s. 1 h 3600 s 1 km
to determine the angular speed:
v 138.9 m/s 4.630 rad/s. r 30.0 m Finally, convert the angular speed to rev/s:
4.630 rad/s.
1 rev 0.737 rev/s 2 rad
105
College Physics
3.
Soluti on
Student Solutions Manual
Chapter 10
Integrated Concepts You have a grindstone (a disk) that is 90.0 kg, has a 0.340-m radius, and is turning at 90.0 rpm, and you press a steel axe against it with a radial force of 20.0 N. (a) Assuming the kinetic coefficient of friction between steel and stone is 0.20, calculate the angular acceleration of the grindstone. (b) How many turns will the stone make before coming to rest?
(a) Given:
M 90.0 kg , R 0.340 m
(for the solid disk),
90.0 rev/min, N 20.0 N , and k 0.20. Find
. The frictional force is given by
f k N (0.20)(20. 0 N) 4.0 N . This frictional force is reducing the speed of the grindstone, so the angular acceleration will be negative. Using the moment of inertia for a solid disk and
I
1 fR I MR 2 2 we know: . Solving for angular acceleration gives:
2f 2(4.0 N) MR (90.0 kg)(0.340 m)
0.261 rad/s 2 0.26 rad/s 2 (2 sig. figs due to k ).
(b) Given:
0 rad/s , 0
90.0 rev 2 rad 1 min 9.425 rad/s. min rev 60 s 106
College Physics
Student Solutions Manual
Chapter 10
2 2 2 , so that: 0 Find . Use the equation
2 02 (0 rad/s) 2 (9.425 rad/s) 2 2 2(0.261 rad/s 2 ) 1 rev 170.2 rad 27.0 rev 27 rev . 2 rad 10.3 DYNAMICS OF ROTATIONAL MOTION: ROTATIONAL INERTIA 10.
This problem considers additional aspects of example Calculating the Efect of Mass Distribution on a Merry-Go-Round. (a) How long does it take the father to give the merry-go-round and child an angular velocity of 1.50 rad/s? (b) How many revolutions must he go through to generate this velocity? (c) If he exerts a slowing force of 300 N at a radius of 1.35 m, how long would it take him to stop them?
Soluti on
(a) Using the result from Example 10.7:
4.44 rad/s 2 , 0 0.00 rad/s , and 1.50 rad/s, we can solve for time using the equation,
t
0 1.50 rad/s 0 rad/s 0.338 s. 4.44 rad/s 2
107
0 t ,
or
College Physics
Student Solutions Manual
(b) Now, to find
Chapter 10
without using our result from part (a), use the
2 2 0 2 , giving: equation
2 02 1.50 rad/s 2 0 rad/s 2 1 rev 0.253 rad 0.0403 rev 2 2 2π rad 2 4.44 rad/s (c) To get an expression for the angular acceleration, use the
equation
net rF I I . Then, to find time, use the equation:
0 0 I 0 rad/s 1.50 rad/s 84.38 kg.m 2 t 0.313 s 1.35 m 300 N rF 16.
Zorch, an archenemy of Superman, decides to slow Earth’s rotation to once per 28.0 h by exerting an opposing force at and parallel to the equator. Superman is not immediately concerned, because he
4.00 107 N
knows Zorch can only exert a force of (a little greater than a Saturn V rocket’s thrust). How long must Zorch push with this force to accomplish his goal? (This period gives Superman time to devote to other villains.) Explicitly show how you follow the steps found in Problem-Solving Strategy for Rotational Dynamics.
108
College Physics
Student Solutions Manual
Chapter 10
Soluti on
Step 1: There is a torque present due to a force being applied perpendicular to a rotation axis. The mass involved is the earth. Step 2: The system of interest is the earth. Step 3: The free body diagram is drawn to the left. Step 4: Given:
F 4.00 10 7 N, r rE 6.376 10 6 m, M 5.979 10 24 kg, 1 rev 2π rad 1h 7.272 10 5 rad/s, and 24.0 h 1 rev 3600 s 1 rev 2π rad 1h 6.233 10 5 rad/s. 28.0 h 1 rev 3600 s
0
t
Find .
Use the equation
net I
to determine the angular acceleration:
net rF 5F I 2Mr 2 / 5 2Mr
Now that we have an expression for the angular acceleration, we can
use the equation
0 t
to get the time:
109
College Physics
Student Solutions Manual
0 t , t
Chapter 10
0 0 2Mr 5F
Substituting in the number gives:
2 6.233 10 -5 rad/s 7.272 10 5 rad/s 5.979 10 24 kg 6.376 10 6 m t . 5 4.00 10 7 N 3.96 1018 s or 1.25 1011 y
10.4 ROTATIONAL KINETIC ENERGY: WORK AND ENERGY REVISITED 24.
Calculate the rotational kinetic energy in the motorcycle wheel (Figure 10.38) if its angular velocity is 120 rad/s.
Soluti on
The moment of inertia for the wheel is
I
M 2 2 12.0 kg R1 R2 0.280 m 2 0.330 m 2 1.124 kg m 2 2 2
Using the equation:
1 1 2 KE rot I 2 1.124 kg m 2 120 rad/s 8.09 10 3 J 2 2
110
College Physics
30.
Student Solutions Manual
Chapter 10
To develop muscle tone, a woman lifts a 2.00-kg weight held in her hand. She uses her biceps muscle to flex the lower arm through an
60.0
angle of . (a) What is the angular acceleration if the weight is 24.0 cm from the elbow joint, her forearm has a moment of inertia of
0.250 kg m2 , and the muscle force is 750 N at an efective perpendicular lever arm of 2.00 cm? (b) How much work does she do?
Soluti on
(a) Assuming her arm starts extended vertically downward, we can calculate the initial angular acceleration.
2π rad 1.047 rad, m w 2.00 kg, rw 0.240 m , 360 I 0.250 kg.m 2 , and F 750 N , where r 0.0200 m .
Given : 60
Find
.
The only force that contributes to the torque when the mass is vertical is the muscle, and the moment of inertia is that of the arm and that of the mass. Therefore:
FM r net so that I m w rw2 I m w rw2
750 N 0.0200 m 2 0.250 kg m 2 2.00 kg 0.240 m
41.07 rad/s 2 41.1 rad/s 2
(b) The work done is:
net W net FM r 750 N 0.0200 m 1.047 rad 15.7 J 111
College Physics
Student Solutions Manual
Chapter 10
10.5 ANGULAR MOMENTUM AND ITS CONSERVATION 36.
Soluti on
(a) Calculate the angular momentum of the Earth in its orbit around the Sun. (b) Compare this angular momentum with the angular momentum of Earth on its axis.
(a) The moment of inertia for the earth around the sun is since the earth is like a point object.
I MR 2 ,
I MR 2 , Lorb I MR 2 2 rad 2.66 10 40 kg m 2 /s 7 3.16 10 s
(5.979 10 24 kg)(1.496 1011 m) 2
(b) The moment of inertia for the earth on its axis is the earth is a solid sphere.
2 MR 2 I 5 , since
2 MR 2 I , 5 2 2 2 rad Lorb MR 2 (5.979 10 24 kg)(6.376 10 6 m) 2 5 5 24 3600 s 7.07 10 33 kg m 2 /s The angular momentum of the earth in its orbit around the sun is
3.76 106 times larger than the angular momentum of the earth around its axis.
112
College Physics
Student Solutions Manual
Chapter 10
10.6 COLLISIONS OF EXTENDED BODIES IN TWO DIMENSIONS 43.
Repeat Example 10.15 in which the disk strikes and adheres to the stick 0.100 m from the nail.
Soluti on
(a) The final moment of inertia is again the disk plus the stick, but this time, the radius for the disk is smaller:
MR 2 I ' mr (0.0500 kg)(0.100 m) 2 (0.667 kg)(1.20 m) 2 0.961 kg m 2 3 2
The final angular velocity can then be determined following the solution to part (a) of Example 10.15:
'
mvr (0.0500 kg)(30.0 m/s)(0.100 m) 0.156 rad/s I' 0.961 kg m 2
(b) The kinetic energy before the collision is the same as in Example
10.15:
KE 22.5 J
The final kinetic energy is now:
1 1 KE' I ' 2' (0.961 kg m 2 )(0.156 rad/s) 2 1.17 10 2 J 2 2 (c) The initial linear momentum is the same as in Example 10.15:
p 1.50 kg m/s
. The final linear momentum is then
113
College Physics
Student Solutions Manual
Chapter 10
M M R ' mr R ' , so that : 2 2 p' (0.0500 kg)(0.100 m) (1.00 kg)(1.20 m) (0.156 rad/s) 0.188 kg m/s p' mr '
114
College Physics
Student Solutions Manual
Chapter 11
CHAPTER 11: FLUID STATICS 11.2 DENSITY 1.
Gold is sold by the troy ounce (31.103 g). What is the volume of 1 troy ounce of pure gold?
Soluti on From Table 11.1:
V have:
6.
Au 19.32 g/cm
3
, so using the equation
m , V
we
m 31.103 g 3 1 . 610 cm 19.32 g/cm 3
(a) A rectangular gasoline tank can hold 50.0 kg of gasoline when full. What is the depth of the tank if it is 0.500-m wide by 0.900-m long? (b) Discuss whether this gas tank has a reasonable volume for a passenger car.
115
College Physics
Soluti on
Student Solutions Manual
(a) From Table 11.1:
gas 0.680 103 kg/m 3
, so using the equation
m m , V lw the height is:
h
m 50.0 kg 0.163 m lw 0.680 10 3 kg/m 3 0.900 m 0.500 m
Chapter 11
(b) The volume of this gasoline tank is 19.4 gallons, quite reasonably sized for a passenger car.
11.3 PRESSURE 12.
The pressure exerted by a phonograph needle on a record is surprisingly large. If the equivalent of 1.00 g is supported by a needle, the tip of which is a circle 0.200 mm in radius, what pressure
is exerted on the record in
Soluti on Using the equation
P
N/m2 ?
F A , we can solve for the pressure:
F mg 1.00 0 3 kg 9.80 m/s 2 P 2 7.80 10 4 Pa 2 A r 2.00 10 -4 m
This pressure is approximately 585 mm Hg.
116
College Physics
Student Solutions Manual
Chapter 11
11.4 VARIATION OF PRESSURE WITH DEPTH IN A FLUID 18.
The aqueous humor in a person’s eye is exerting a force of 0.300 N
1.10 - cm 2
on the area of the cornea. (a) What pressure is this in mm Hg? (b) Is this value within the normal range for pressures in the eye?
Soluti on
P (a) Using the equation
F A , we can solve for the pressure: 2
F 0.300 N 100 cm 1 mm Hg 3 P 20.5 mm Hg 2.73 10 Pa 2 A 1.10 cm 1 m 133.3 Pa (b) From Table 11.5, we see that the range of pressures in the eye is 12-24 mm Hg, so the result in part (a) is within that range.
23.
Show that the total force on a rectangular dam due to the water behind it increases with the square of the water depth. In particular,
show that this force is given by
F gh2 L / 2 , where
h
L
is the density
of water, is its depth at the dam, and is the length of the dam. You may assume the face of the dam is vertical. (Hint: Calculate the average pressure exerted and multiply this by the area in contact with the water. See Figure 11.42.)
117
College Physics
Student Solutions Manual
Chapter 11
Soluti on The average pressure on a dam is given by the equation
where
h 2
h P g , 2
is the average height of the water behind the dam. Then,
P the force on the dam is found using the equation
F A , so that
gh 2 L h F P A g (hL), or F 2 . Thus, the average force on a 2 rectangular dam increases with the square of the depth.
h
11.5 PASCAL’S PRINCIPLE 27.
A certain hydraulic system is designed to exert a force 100 times as large as the one put into it. (a) What must be the ratio of the area of the slave cylinder to the area of the master cylinder? (b) What must be the ratio of their diameters? (c) By what factor is the distance through which the output force moves reduced relative to the distance through which the input force moves? Assume no losses to friction.
118
College Physics
Student Solutions Manual
Soluti on (a) Using the equation
becomes:
F1 F2 A1 A2
Chapter 11
we see that the ratio of the areas
AS FS 100 100 AM FM 1
d 2 r 4 2
(b) We know that the area goes as areas gives:
, so the ratio of the
AS rS2 d S 2 d S2 d 2 2 100, so that S 100 10.0 2 AM rM d M 2 d M dM 2
(c) Since the work input equals the work output, and work is
Fi d i Fo d o proportional to force times distance,
d o Fi 1 d i Fo 100 .
This tells us that the distance through which the output force moves is reduced by a factor of 100, relative to the distance through which the input force moves.
28.
(a) Verify that work input equals work output for a hydraulic system assuming no losses to friction. Do this by showing that the distance the output force moves is reduced by the same factor that the output force is increased. Assume the volume of the fluid is constant. (b) What efect would friction within the fluid and between components in the system have on the output force? How would this depend on whether or not the fluid is moving?
119
College Physics
Soluti on
Student Solutions Manual
(a) If the input cylinder is moved a distance of fluid
Chapter 11
d i , it displaces a volume
V , where the volume of fluid displaced must be the same
for the input as the output:
Now, using the equation
Ai A o
V d i Ai d o Ao d o d i
F1 F2 A1 A2 , we can write the ratio of the
areas in terms of the ratio of the forces:
A F1 F2 Fo Fi o A1 A2 Ai
.
Finally, writing the output in terms of force and distance gives:
FA d A Wo Fo d o i o i i Fi d i Wi Ai Ao . In other words, the work output equals the work input for a hydraulic system. (b) If the system is not moving, the fraction would not play a role.
W = W W ;
i f With friction, we know there are losses, so that o therefore, the work output is less than the work input. In other words, with friction, you need to push harder on the input piston than was calculated. Note: the volume of fluid is still conserved.
120
College Physics
Student Solutions Manual
Chapter 11
11.7 ARCHIMEDES’ PRINCIPLE 40.
Bird bones have air pockets in them to reduce their weight—this also gives them an average density significantly less than that of the bones of other animals. Suppose an ornithologist weighs a bird bone
in air and in water and finds its mass is
45.0 g
and its apparent mass
3.60 g
when submerged is (the bone is watertight). (a) What mass of water is displaced? (b) What is the volume of the bone? (c) What is its average density?
Soluti on
(a) The apparent mass loss is equal to the mass of the fluid displaced, so the mass of the fluid displaced is just the difference the mass of the bone and its apparent mass:
mdisplaced 45.0 g 3.60 g 41.4 g (b) Using Archimedes’ Principle, we know that that volume of water displaced equals the volume of the bone; we see that
Vb Vw
mw 41.4 g 41.4 cm 3 3 w 1.00 g/cm
(c) Using the following equation, we can calculate the average density of the bone:
o
mb 45.0 g 1.09 g/cm 3 3 Vb 41.4 cm 121
College Physics
Student Solutions Manual
Chapter 11
This is clearly not the density of the bone everywhere. The air 3 3 1 . 29 10 g/cm pockets will have a density of approximately , while
the bone will be substantially denser.
46.
(a) What is the density of a woman who floats in freshwater with
4.00% of her volume above the surface? This could be measured by placing her in a tank with marks on the side to measure how much water she displaces when floating and when held under water (briefly). (b) What percent of her volume is above the surface when she floats in seawater?
Soluti on
fraction submerged (a) From the equation
obj fl , we see that:
person fresh water (fraction submerged ) 1.00 10 3 kg/m 3 (0.960) 960 kg/m 3 (b) The density of seawater is greater than that of fresh water, so she should float more.
fraction submerged
person sea water
960 kg/m 3 0.9366. 1025 kg/m 3
Therefore, the percent of her volume above water is
% above water 1.0000 - 0.9366 100% 6.34% She does indeed float more in seawater.
122
College Physics
Student Solutions Manual
Chapter 11
50.
Scurrilous con artists have been known to represent gold-plated tungsten ingots as pure gold and sell them to the greedy at prices much below gold value but deservedly far above the cost of tungsten. With what accuracy must you be able to measure the mass of such an ingot in and out of water to tell that it is almost pure tungsten rather than pure gold?
Soluti on
To determine if the ingot is gold or tungsten, we need to calculate the percent difference between the two substances both out and in water. Then, the difference between these percent differences is the necessary accuracy that we must have in order to determine the substance we have. The percent difference is calculated by calculating the difference in a quantity and dividing that by the value for gold. Out of water: Using the difference in density, the percent difference is then:
% out
g t g
19.32 g/cm 3 19.30 g/cm 3 100% 100% 0.1035% in air 19.32 g/cm 3
3 1 . 000 cm In water: Assume a nugget. Then the apparent mass loss is
equal to that of the water displaced, i.e., 1.000 g. So, we can calculate the percent difference in the mass loss by using the difference in masses:
% in
m' g m' t m'g
18.32 g/cm 3 18.30 g/cm 3 100% 100% 0.1092% in water 18.32 g/cm 3
The difference between the required accuracies for the two methods
is
0.1092 % 0.1035 % 0.0057 % 0.006 % 123
, so we need 5 digits of
College Physics
Student Solutions Manual
Chapter 11
accuracy to determine the difference between gold and tungsten.
11.8 COHESION AND ADHESION IN LIQUIDS: SURFACE TENSION AND CAPILLARY ACTION 59.
We stated in Example 11.12 that a xylem tube is of radius
2.50 105 m . Verify that such a tube raises sap less than a meter by finding
h for it, making the same assumptions that sap’s density is
1050 kg/m 3 , its contact angle is zero, and its surface tension is the same as that of water at
Soluti on
h
20.0C .
2 cos gr
Use the equation to find the height to which capillary action will move sap through the xylem tube:
h
65.
2 cos 2(0.0728 N/m)(cos 0) 0.566 m 3 2 5 gr 1050 kg/m 9.80 m/s 2.50 10 m
When two soap bubbles touch, the larger is inflated by the smaller until they form a single bubble. (a) What is the gauge pressure inside a soap bubble with a 1.50-cm radius? (b) Inside a 4.00-cm-radius soap bubble? (c) Inside the single bubble they form if no air is lost when they touch?
124
College Physics
Student Solutions Manual
Soluti on
P
Chapter 11
4 r
(a) Use the equation to find the gauge pressure inside a spherical soap bubble of radius 1.50 cm:
4 4(0.0370 N/m) 9.87 N/m 2 -2 r (1.50 10 m)
P1
P (b) Use
4 r
to find the gauge pressure inside a spherical soap
P2 bubble of radius 4.00 cm:
4 4(0.0370 N/m) 3.70 N/m 2 r (0.0400 m)
(c) If they form one bubble without losing any air, then the total
4 4 4 V V1 V2 r13 r23 R 3 3 3 3 volume remains constant: Solving for the single bubble radius gives:
13
13
R r13 r23 (0.0150 m) 3 (0.0400 m) 3 0.0406 m. So we can calculate the gauge pressure for the single bubble using the equation
P
4 4(0.0370 N/m) 3.65 N/m 2 r 0.0406 m
11.9 PRESSURES IN THE BODY
125
College Physics
71.
Student Solutions Manual
Heroes in movies hide beneath water and breathe through a hollow reed (villains never catch on to this trick). In practice, you cannot inhale in this manner if your lungs are more than 60.0 cm below the surface. What is the maximum negative gauge pressure you can
create in your lungs on dry land, assuming you can achieve water pressure with your lungs 60.0 cm below the surface?
Soluti on
Chapter 11
3.00 cm
The negative gauge pressure that can be achieved is the sum of the pressure due to the water and the pressure in the lungs:
P 3.00 cm H 2 O 60.0 cm H 2 O 63.0 cm H 2 O 75.
Pressure in the spinal fluid is measured as shown in Figure 11.43. If the pressure in the spinal fluid is 10.0 mm Hg: (a) What is the reading of the water manometer in cm water? (b) What is the reading if the person sits up, placing the top of the fluid 60 cm above the tap? The fluid density is 1.05 g/mL.
Soluti on
(a) This part is a unit conversion problem:
133 N/m 2 1.0 cm H 2O P0 10.0 mm Hg 13.6 m H 2O 2 1 . 0 mm Hg 98.1 N/m (b) Solving this part in standard units, we know that
P P0 P P0 hg , or
P 1330 N/m 2 1.05 10 3 kg/m 3 9.80 m/s 2 0.600 m 7504 N/m 2 Then converting to cm water:
126
College Physics
Student Solutions Manual
.0 cm H O 198.1 N/m
P 7504 N/m 2
82.
2
2
Chapter 11
76.5 cm H 2 O
Calculate the pressure due to the ocean at the bottom of the
11.0 km
Marianas Trench near the Philippines, given its depth is and assuming the density of sea water is constant all the way down. (b) Calculate the percent decrease in volume of sea water due to such a pressure, assuming its bulk modulus is the same as water and is constant. (c) What would be the percent increase in its density? Is the assumption of constant density valid? Will the actual pressure be greater or smaller than that calculated under this assumption?
Soluti on
(a) Using the equation
P hg , we can calculate the pressure at a
P hg 11.0 10 3 m 1025 kg/m 3 9.80 m/s 2 1 atm 1.105 10 8 N/m 2 1.09 10 3 atm 5 2 1.013 10 N/m depth of 11.0 km: (b) Using the following equation:
V 1 F P 1.105 108 N/m 2 5.02 10 2 5.0% decrease in volume . 9 2 V0 B A B 2.2 10 N/m
(c) Using the equation change in density:
P
m V , we can get an expression for percent
127
College Physics
Student Solutions Manual
Chapter 11
V0 m V0 V 1 1 1.053, m V0 V0 V 1 V V0 1.00 5.02 10 2 so that the percent increase in density is 5.3%. Therefore, the assumption of constant density is not strictly valid. The actual pressure would be greater, since the pressure is proportional to density.
128
College Physics
Student Solutions Manual
Chapter 12
CHAPTER 12: FLUID DYNAMICS AND ITS BIOLOGICAL AND MEDICAL APPLICATIONS 12.1 FLOW RATE AND ITS RELATION TO VELOCITY
1.
3 cm /s What is the average flow rate in
of gasoline to the engine of a car traveling at 100 km/h if it averages 10.0 km/L?
Soluti on
We are given the speed of the car and a gas mileage, giving us a
Q volume consumed per time, so the equation want to use to calculate the average flow rate:
V t
is the formula we
V speed 100 km/h 1000 cm 3 1 H Q 2.78 cm 3 /s t gas mileage 10.0 km/L 1L 3600 s
14.
Prove that the speed of an incompressible fluid through a constriction, such as in a Venturi tube, increases by a factor equal to the square of the factor by which the diameter decreases. (The converse applies for flow out of a constriction into a larger-diameter region.)
129
College Physics
Soluti on
Student Solutions Manual
Chapter 12
If the fluid is incompressible, then the flow rate through both sides
Q Av A v
1 1 2 2 . Writing the areas in terms of the will be equal: diameter of the tube gives:
d12 d 22 2 v1 v 2 v 2 v1 d12 / d 22 v1 d1 / d 2 4 4 Therefore, the velocity through section 2 equals the velocity through section 1 times the square of the ratio of the diameters of section 1 and section 2.
130
College Physics
Student Solutions Manual
Chapter 12
12.2 BERNOULLI’S EQUATION
21.
Every few years, winds in Boulder, Colorado, attain sustained speeds of 45.0 m/s (about 100 mi/h) when the jet stream descends during early spring. Approximately what is the force due to the Bernoulli
efect on a roof having an area of
220 m 2 ? Typical air density in
3 1 . 14 kg/m Boulder is , and the corresponding atmospheric pressure is
8.89 104 N/m 2 . (Bernoulli’s principle as stated in the text assumes laminar flow. Using the principle here produces only an approximate result, because there is significant turbulence.)
131
College Physics
Soluti on
Student Solutions Manual
Chapter 12
Ignoring turbulence, we can use Bernoulli’s equation:
1 1 P1 v12 gh1 P2 v22 gh2 , 2 2 where the heights are the same:
h1 h2
because we are concerned about above and below a thin roof.
v The velocity inside the house is zero, so 1 v outside the house is 2 can then be found:
0.0 m/s , while the speed
45.0 m/s . The difference in pressures, P1 P2 ,
1 P1 P2 v22 2 . Now, we can relate the change in
pressure to the force on the roof, using the Equation
F P1 P2 A
,
A 200 m : because we know the area of the roof 2
1 F P1 P2 A v22 v12 A 2 and substituting in the values gives:
1 2 2 F 1.14 kg/m 3 45 m/s 0.0 m/s 220 m 2 2.54 10 5 N 2 132 This extremely large force is the reason you should leave windows
College Physics
Student Solutions Manual
133
Chapter 12
College Physics
Student Solutions Manual
Chapter 12
12.3 THE MOST GENERAL APPLICATIONS OF BERNOULLI’S EQUATION
27.
The left ventricle of a resting adult’s heart pumps blood at a flow 3 83.0 cm /s , increasing its pressure by 110 mm Hg, its speed rate of
from zero to 30.0 cm/s, and its height by 5.00 cm. (All numbers are averaged over the entire heartbeat.) Calculate the total power output of the left ventricle. Note that most of the power is used to increase blood pressure.
Soluti on
Using the equation for power in fluid flow, we can calculate the power output by the left ventricle during the heartbeat:
1 power = P v 2 gh Q, where 2 133 N/m 2 P 110 mm Hg 1.463 10 4 N/m 2 , 1.0 mm Hg 1 2 1 2 v 1.05 103 kg/m 3 0.300 m/s 47.25 N/m 2 , and 2 2 gh 1.05 103 kg/m 3 9.80 m/s 2 0.0500 m 514.5 N/m 2 , giving : 10 6 m 3 power 1.463 10 N/m 47.25 N/m 514.5 N/m 83.0 cm /s cm 3 1.26 W 4
2
2
2
3
12.4 VISCOSITY AND LAMINAR FLOW; POISEUILLE’S LAW
134
College Physics
Student Solutions Manual
Chapter 12
35.
The arterioles (small arteries) leading to an organ, constrict in order to decrease flow to the organ. To shut down an organ, blood flow is reduced naturally to 1.00% of its original value. By what factor did the radii of the arterioles constrict? Penguins do this when they stand on ice to reduce the blood flow to their feet.
Soluti on
If the flow rate is reduced to 1.00% of its original value, then
Pr24 Pr14 Q2 0.0100Q1 0.0100 8L2 8L1 . Since the length of the arterioles is kept constant and the pressure difference is kept constant, we can get a relationship between the radii:
r24 0.0100r14 r2 0.0100 r1 0.316r1 1/ 4
The radius is reduced to 31.6% of the original radius to reduce the flow rate to 1.00% of its original value.
43.
Example 12.8 dealt with the flow of saline solution in an IV system. 4 2 1 . 62 10 N/m (a) Verify that a pressure of
is created at a depth of 1.61 m in a saline solution, assuming its density to be that of sea water. (b) Calculate the new flow rate if the height of the saline solution is decreased to 1.50 m. (c) At what height would the direction of flow be reversed? (This reversal can be a problem when patients stand up.)
135
College Physics
Soluti on
Student Solutions Manual
Chapter 12
P hg
(a) We can calculate the pressure using the equation 2 the height is 1.61 m and the density is that of seawater:
where
P2 hg 1025 kg/m 3 1.61 m 9.80 m/s 2 1.62 104 N/m2 (b) If the pressure is decreased to 1.50 m, we can use the equation
( P2 P1 )r 4 Q 8l
to determine the new flow rate:
( P2 P1 )r 4 Q . 8l We
3 3 2 l 0.0250 m, r 0.150 10 m, 1 . 005 10 N s/m , and use
P1 1.066 10 3 N/m 2 .
P Using the equation 2 depth of 1.50 m:
hg , we can find the pressure due to a
P2 ' 1025 kg/m 3 1.50 m 9.80 m/s 2 1.507 10 4 N/m 2 .
So substituting into the equation 136
( P2 P1 )r 4 Q 8l
gives:
College Physics
Student Solutions Manual
Chapter 12
12.5 THE ONSET OF TURBULENCE
51.
Verify that the flow of oil is laminar (barely) for an oil gusher that shoots crude oil 25.0 m into the air through a pipe with a 0.100-m diameter. The vertical pipe is 50 m long. Take the density of the oil 3 900 kg/m to be
2 1 . 00 ( N/m )s and its viscosity to be
137
(or
1.00 Pa s ).
College Physics
Student Solutions Manual
Soluti on
NR
Chapter 12
2 vr
We will use the equation to determine the Reynolds number, so we must determine the velocity of the oil. Since the oil rises to 25.0 m,
v 2 v02 2 gy , where v 0 m/s , y 25.0 m , so
v0 2 gy 2 9.80 m/s 2 25.0 m 22.136 m/s
NR Now, we can use the equation
2 vr :
2900 kg/m 3 22.136 m/s 0.0500 m NR 1.99 103 2000 2 1.00 N/m s
N 2000
Since R is the approximate upper value for laminar flow. So the flow of oil is laminar (barely).
138
College Physics
59.
Student Solutions Manual
Chapter 12
Gasoline is piped underground from refineries to major users. The 2 3 3 . 00 10 m /s flow rate is
(about 500 gal/min), the viscosity of
3 2 3 1 . 00 10 (N/m ) s 680 kg/m gasoline is , and its density is . (a) What
minimum diameter must the pipe have if the Reynolds number is to be less than 2000? (b) What pressure diference must be maintained along each kilometer of the pipe to maintain this flow rate?
Soluti on
NR
2 vr 2 vr NR 2000 , where , to find
(a) We will use the equation the minimum radius, which will give us the minimum diameter. First, we need to get an expression for the velocity, from the
v equation
Q Q A r 2 . Substituting gives:
2 Q / r 2 r 2 Q Q 2000 or r , r (1000)
diameter is
so that the minimum
Q (680 kg/m 3 )(3.00 10 2 m 3 /s) d 13.0 m 500 500 1.00 10 3 N s/m 2
(b) Using the equation
Pr 4 Q 8l , we can determine the pressure 139
College Physics
Student Solutions Manual
Chapter 12
difference from the flow rate:
8lQ 8(1.00 103 N s/m 2 )(1000 m)(3.00 10 2 m3 /s) P 4 2.68 106 N/m 2 4 r 12.99 m
This pressure is equivalent to pressure!
2.65 10 11 atm , which is very small
12.7 MOLECULAR TRANSPORT PHENOMENA: DIFFUSION, OSMOSIS, AND RELATED PROCESSES
66.
Soluti on
Suppose hydrogen and oxygen are difusing through air. A small amount of each is released simultaneously. How much time passes before the hydrogen is 1.00 s ahead of the oxygen? Such diferences in arrival times are used as an analytical tool in gas chromatography.
From Table 12.2, we know
DH 2 6.4 10 5 m 2 /s and DO2 1.8 10 5 m 2 /s
. We
x 2Dt
want to use the equation rms , since that relates time to the distance traveled during diffusion. We have two equations:
xrms ,O 2 2 DO2 t O2 and xrms ,H 2 2 DH 2 t H 2
. We want the distance traveled to be the same, so we can set the equations equal. The distance will be the same when the time
140
College Physics
Student Solutions Manual
t difference between H 2
and tO 2
Chapter 12
is 1.00 s, so we can relate the two
t tH 2 1.00 s times: O 2 . Setting the two distance equations equal and squaring gives: 2 DO 2 t O 2 2 D H 2 t H 2
and substituting for oxygen time gives:
DO 2 tH 2 1.00 s DH 2 tH 2
. Solving for the hydrogen time gives:
DO 2
1.8 10 5 m 2 /s t H2 1.00 s 1.00 s 0.391 s 5 2 5 2 D H 2 DO 2 6.4 10 m /s 1.8 10 m /s
x
The hydrogen will take 0.391 s to travel to the distance , while the oxygen will take 1.391 s to travel the same distance. Therefore, the hydrogen will be 1.00 seconds ahead of the oxygen after 0.391 s.
141
College Physics
Student Solutions Manual
Chapter 13
CHAPTER 13: TEMPERATURE, KINETIC THEORY, AND THE GAS LAWS 13.1 TEMPERATURE
1. What is the Fahrenheit temperature of a person with a
Soluti on
We can convert from Celsius to Fahrenheit:
9 T F (TC ) 32.0 5 9 T F (39.0C) 32.0C 102F 5
So
39.0C is equivalent to 102F .
142
39.0C fever?
College Physics
7.
Student Solutions Manual
Chapter 13
(a) Suppose a cold front blows into your locale and drops the temperature by 40.0 Fahrenheit degrees. How many degrees Celsius
40.0F
does the temperature decrease when there is a decrease in temperature? (b) Show that any change in temperature in Fahrenheit degrees is nine-fifths the change in Celsius degrees.
Soluti on (a) We can use the equation in temperature.
5 TC (T F 32) 9
to determine the change
5 5 ΔTC TC2 TC1 (T F2 32) (T F1 32) 9 9 5 5 5 (T F2 T F1 ) T F (40) 22.2 C 9 9 9
(b) We know that
and
TF TF2 TF1 . We also know that
9 T F2 TC2 32 5
9 TF1 TC1 32 5 . So, substituting, we have
9 ΔT F TC2 32 5
9 TC1 32 5
. Partially solving and rearranging the
143
College Physics
Student Solutions Manual
equation, we have
Chapter 13
9 9 TF TC . TF TC2 TC1 5 5 . Therefore,
13.2 THERMAL EXPANSION OF SOLIDS AND LIQUIDS
15. Show that 60.0 L of gasoline originally at when it warms to
Soluti on
15.0C will expand to 61.1 L
35.0C, as claimed in Example 13.4.
We can get an expression for the change in volume using the equation where
V V0 T , so the final volume is V V0 V V0 (1 T ),
9.50 104 / C for gasoline (see Table 13.2), so that
V ' V0 VT 60.0 L (9.50 10 4 / C)(60.0 L)(20.0 C) 61.1 L As the temperature is increased, the volume also increases.
144
College Physics
21. Show that
Student Solutions Manual
3 ,
Chapter 13
by calculating the change in volume
V
of a cube
with sides of length
Soluti on
L L T
0 From the equation we know that length changes with temperature. We also know that the volume of a cube is related to its
length by
V L3 . Using the equation V V0 V
and substituting for
3 L with L L0 T V ( L L ) 0 the sides we get . Then we replace 3 3 3 V ( L L T ) L ( 1 T ) 0 0 0 get . Since T
to
is small, we can use the
3 3 3 V L ( 1 3 T ) L 3 L 0 0 0 T . Rewriting the binomial expansion to get
length terms in terms of volume gives comparing forms we get
V V0 V V0 3V0 T . By
V V0 T 3V0 T . Thus, 3 .
13.3 THE IDEAL GAS LAW
145
College Physics
Student Solutions Manual
27. In the text, it was shown that
N / V 2.68 1025 m 3
Show that this quantity is equivalent to
Chapter 13
for gas at STP. (a)
N / V 2.68 1019 cm3 ,
as
3 μm stated. (b) About how many atoms are there in one
(a cubic micrometer) at STP? (c) What does your answer to part (b) imply about the separation of atoms and molecules?
Soluti on
(a) This is a units conversion problem, so
N V
3
2.68 10 25 1 m 19 3 2.68 10 cm 3 m 100 cm
(b) Again, we need to convert the units:
N V
3
2.68 10 25 1m 7 -3 2 . 68 10 m 3 6 1.00 10 m m
(c) This says that atoms and molecules must be on the order of (if they were tightly packed)
V
N 1 3.73 10 8 m 3 7 -3 7 -3 2.68 10 m 2.68 10 m
146
College Physics
Student Solutions Manual
Chapter 13
Or the average length of an atom is less than approximately
(3.73 108 m3 )1/ 3 3.34 103 m 3 nm. Since atoms are widely spaced, the average length is probably more on the order of 0.3 nm.
33.
5 2 7 . 00 10 N/m A bicycle tire has a pressure of
at a temperature of
18.0C and contains 2.00 L of gas. What will its pressure be if you let 100 cm 3
out an amount of air that has a volume of at atmospheric pressure? Assume tire temperature and volume remain constant.
Soluti on
First, we need to convert the temperature and volume:
T (K) T (C) 273.15 18.0 273.15 291.2 K, and V 2.00 L 2.00 10 3 m 3 . Next, use the ideal gas law to determine the initial number of molecules in the tire:
147
College Physics
Student Solutions Manual
Chapter 13
P1V 7.00 10 5 N/m 2 2.00 10 3 m 3 P1V N1kT N1 3.484 10 23 23 kT 1.38 10 J/K 291.15 K
Then, we need to determine how many molecules were removed from the tire: 6 3 3 10 m (1.013 10 N/m ) 100 cm 3 cm PV 2.52110 21 PV NkT N 23 kT (1.38 10 J/K)(291.1 5K) 5
2
We can now determine how many molecules remain after the gas is released:
N 2 N1 N 3.484 1023 2.5211021 3.459 1023 Finally, the final pressure is:
N 2 kT (3.459 10 23 )(1.38 10 23 J/K )( 291.15 K ) V 2.00 10 3 m 3 6.95 10 5 N/m 2 6.95 10 5 Pa
P2
38.
(a) In the deep space between galaxies, the density of atoms is as 6 3 10 atoms/m , and the temperature is a frigid 2.7 K. What is the low as
3 pressure? (b) What volume (in ) is occupied by 1 mol of gas? (c) If this volume is a cube, what is the length of its sides in kilometers?
m
148
College Physics
Soluti on
Student Solutions Manual
Chapter 13
(a) Use the ideal gas law, where
PV NkT N 10 6 P kT (1.38 10 23 J/K)(2.7 K) 3 V 1m 3.73 10 17 N/m 2 3.7 10 17 N/m 2 3.7 10 17 Pa
(b) Now, using the pressure found in part (a), let n = 1.00 mol. Use the ideal gas law:
PV nRT V
nRT (1.00 mol)(8.31 J/mol K)(2.7 K) 6.02 1017 m 3 6.0 1017 m 3 17 2 P 3.73 10 N/m
(c) Since the volume of a cube is its length cubed:
L V 1/ 3 (6.02 1017 m3 )1/ 3 8.45 105 m 8.4 102 km
149
College Physics
Student Solutions Manual
Chapter 13
13.4 KINETIC THEORY: ATOMIC AND MOLECULAR EXPLANATION OF PRESSURE AND TEMPERATURE
44.
Nuclear fusion, the energy source of the Sun, hydrogen bombs, and fusion reactors, occurs much more readily when the average kinetic energy of the atoms is high—that is, at high temperatures. Suppose you want the atoms in your fusion experiment to have average kinetic energies of
Soluti on Use the equation
6.40 10 –14 J . What temperature is needed?
3 KE kT 2
to find the temperature:
3 2KE 2 6.40 10 14 J KE kT T 3.09 10 9 K 23 2 3k 3 1.38 10 J/K
13.6 HUMIDITY, EVAPORATION, AND BOILING
50.
20.0C
(a) What is the vapor pressure of water at ? (b) What percentage of atmospheric pressure does this correspond to? (c) What percent of
20.0C air is water vapor if it has 100% relative
1.20 kg/m humidity? (The density of dry air at 20.0C is 150
3
.)
College Physics
Soluti on
Student Solutions Manual
(a) Vapor Pressure for
Chapter 13
H 2O(20C) 2.33 103 N/m 2 2.33 103 Pa
(b) Divide the vapor pressure by atmospheric pressure:
2.33 103 N/m 2 100% 2.30% 1.01 105 N/m 2 (c) The density of water in this air is equal to the saturation vapor density of water at this temperature, taken from Table 13.5. Dividing by the density of dry air, we can get the percentage of
water in the air:
56.
1.72 10 2 kg/m 3 100% 1.43% 1.20 kg/m 3
3 g/m What is the density of water vapor in
desert when the temperature is 6.00%?
Soluti on
on a hot dry day in the
40.0C and the relative humidity is
vapor density 100% saturation vapor density percent relative humidity saturation vapor density vapor density 100% 3 (6.00%)(51.1 g/m ) 3.07 g/m 3 100%
percent relative humidity
151
College Physics
62.
Student Solutions Manual
Chapter 13
4 2 3 . 30 10 N/m Atmospheric pressure atop Mt. Everest is . (a) What is
the partial pressure of oxygen there if it is 20.9% of the air? (b) What percent oxygen should a mountain climber breathe so that its partial pressure is the same as at sea level, where atmospheric pressure is
1.01 10 5 N/m 2 ?
(c) One of the most severe problems for those climbing very high mountains is the extreme drying of breathing passages. Why does this drying occur?
Soluti on
(a) The partial pressure is the pressure a gas would create if it alone occupied the total volume, or the partial pressure is the percent the gas occupies times the total pressure:
partial pressure O 2 (%O 2 )(atmosphe ric pressure) (0.209)(3. 30 10 4 N/m 2 ) 6.90 10 3 Pa (b) First calculate the partial pressure at sea level:
partial pressure at sea level (%O 2 )(atmosphe ric pressure) (0.209)(1. 013 105 N/m 2 ) 2.117 10 4 Pa Set this equal to the percent oxygen times the pressure at the top of Mt. Everest:
152
College Physics
Student Solutions Manual
Chapter 13
%O 2 4 2 4 (3.30 10 N/m ) 2.117 10 Pa 100%
partial pressure at sea level
Thus,
2.117 10 4 N/m 2 %O 2 100% 64.2% 4 2 3.30 10 N/m
The mountain climber should breathe air containing 64.2% oxygen at the top of Mt. Everest to maintain the same partial pressure as at sea level. Clearly, the air does not contain that much oxygen. This is why you feel lightheaded at high altitudes: You are partially oxygen deprived.
(c) This drying process occurs because the partial pressure of water vapor at high altitudes is decreased substantially. The climbers breathe very dry air, which leads to a lot of moisture being lost due to evaporation. The breathing passages are therefore not getting the moisture they require from the air being breathed.
68.
150C
Integrated Concepts If you want to cook in water at , you need a pressure cooker that can withstand the necessary pressure. (a) What pressure is required for the boiling point of water to be this high? (b) If the lid of the pressure cooker is a disk 25.0 cm in diameter, what force must it be able to withstand at this pressure?
153
College Physics
Soluti on
Student Solutions Manual
Chapter 13
(a) From Table 13.5, we can get the vapor pressure of water at Vapor pressure
150C :
4.76 105 N/m 2
F P , A
(b) Using the equation we can calculate the force exerted on the pressure cooker lid. Here, we need to use Newton’s laws to balance forces. Assuming that we are cooking at sea level, the forces on the lid will stem from the internal pressure, found in part (a), the ambient atmospheric pressure, and the forces holding the lid shut. Thus we have a “balance of pressures”:
P 1 atm (4.76 10 5 Pa) = 0 P = 3.75 10 5 Pa net F = PA (3.75 10 5 Pa)( (0.125 m) 2 ) = 1.84 10 4 N
154
College Physics
Student Solutions Manual
Chapter 14
CHAPTER 14: HEAT AND HEAT TRANSFER METHODS 14.2 TEMPERATURE CHANGE AND HEAT CAPACITY 1.
On a hot day, the temperature of an 80,000-L swimming pool
1.50C
increases by . What is the net heat transfer during this heating? Ignore any complications, such as loss of water by evaporation.
Soluti on
The heat input is given by
is
Q mcT , where the specific heat of water
c 4186 J/kg C . The mass is given by
1 m3 m V (1.00 10 kg/m )(80,000 L) 8.00 10 4 kg, 1000 L 3
3
and the temperature change is
T 1.50C . Therefore,
Q mcT (8.00 104 kg)(4186 J/kg C)(1.50C) 5.02 108 J
155
College Physics
9.
Student Solutions Manual
Chapter 14
Following vigorous exercise, the body temperature of an 80.0-kg person is
40.0C . At what rate in watts must the person transfer 37.0C
thermal energy to reduce the body temperature to in 30.0 min, assuming the body continues to produce energy at the rate of
150 W?
Soluti on
1 watt = 1 joule/seco nd or 1 W = 1 J/s
First, calculate how much heat must be dissipated:
Q mchuman bodyT (80.0 kg)(3500 J/kg C)(40C - 37C) 8.40 10 5 J Then, since power is heat divided by time, we can get the power required to produce the calculated amount of heat in 30.0 minutes:
Q 8.40 10 5 J Pcooling 4.67 10 2 W. t (30 min)(60 s/1 min) Now, since the body continues to produce heat at a rate of 150 W, we need to add that to the required cooling power:
Prequired Pcooling Pbody 467 W 150 W 617 W. 14.3 PHASE CHANGE AND LATENT HEAT
156
College Physics
Student Solutions Manual
12. A bag containing
Chapter 14
0C ice is much more efective in absorbing energy 0C
than one containing the same amount of water. (a) How much heat transfer is necessary to raise the temperature of 0.800 kg of water from
0C to 30.0C ? (b) How much heat transfer is required to 0C
first melt 0.800 kg of ice and then raise its temperature? (c) Explain how your answer supports the contention that the ice is more efective.
157
College Physics
Soluti on
Student Solutions Manual
Chapter 14
Q mcT , since there is no phase change involved in heating
(a) Use the water:
Q mcT (0.800 kg)(4186 J/kg C)(30.0C) 1.00 10 5 J (b) To determine the heat required, we must melt the ice, using
Q mLf , and then add the heat required to raise the temperature of melted ice using
Q mcT , so that
Q mLf mcT (0.800 kg)(334 103 J/kg) 1.005 105 J 3.68 105 J (c) The ice is much more effective in absorbing heat because it first must be melted, which requires a lot of energy, then it gains the
heat that the water also would. The first
to melt the ice, then it absorbs the water absorbs.
19.
2.67 10 5 J
1.00 10 5 J
of heat is used
of heat that the
How many grams of cofee must evaporate from 350 g of cofee in a
95.0C
45.0C
100-g glass cup to cool the cofee from to ? You may assume the cofee has the same thermal properties as water and that the average heat of vaporization is 2340 kJ/kg (560 cal/g). (You may neglect the change in mass of the cofee as it cools, which will give you an answer that is slightly larger than correct.)
158
College Physics
Soluti on
Student Solutions Manual
Chapter 14
The heat gained in evaporating the coffee equals the heat leaving the coffee and glass to lower its temperature, so that
MLv mc cc ΔT mg cg ΔT ,
M
where is the mass of coffee that evaporates. Solving for the evaporated coffee gives:
M
T (mc cc mg cg ) Lv (95.0C 45.0C) (350 g)(1.00 cal/g C) (100 g)(0.20 cal/g C) 33.0 g 560 cal/g
Notice that we did the problem in calories and grams, since the latent heat was given in those units, and the result we wanted was in grams. We could have done the problem in standard units, and then converted back to grams to get the same answer.
25. If you pour 0.0100 kg of
20.0C water onto a 1.20-kg block of ice
15.0C
(which is initially at ), what is the final temperature? You may assume that the water cools so rapidly that efects of the surroundings are negligible.
Soluti on
The heat gained by the ice equals the heat lost by the water. Since we do not know the final state of the water/ice combination, we first
0C
need to compare the heat needed to raise the ice to and the heat available from the water. First, we need to calculate how much heat would be required to raise the temperature of the ice to
159
0C :
College Physics
Student Solutions Manual
Chapter 14
Qice mcT (1.20 kg)(2090 J/kg C)(15C) 3.762 10 4 J Now, we need to calculate how much heat is given off to lower the
water to
0C : Q1 mcT1 (0.0100 kg)(4186 J/kg C)(20.0C) 837.2 J
Since this is less than the heat required to heat the ice, we need to calculate how much heat is given off to convert the water to ice:
Q2 mLf (0.0100 kg)(334 103 J/kg) 3.340 103 J Thus, the total amount of heat given off to turn the water to ice at 3 0C : Qwater 4.177 10 J .
Since
Qice Qwater
, we have determined that the final state of the
0C
water/ice is ice at some temperature below . Now, we need to calculate the final temperature. We set the heat lost from the water equal to the heat gained by the ice, where we now know that the
T final state is ice at f
0C :
Qlost by water Qgained by ice, or mwater c water T200 mwater Lf mwater cice T0? mice cice T15? Substituting for the change in temperatures (being careful that always positive) and simplifying gives
160
T
is
College Physics
Student Solutions Manual
Chapter 14
Solving for the final temperature gives
Tf
mwater [cwater (20C) Lf ] micecice (15C) (mwater mice )cice
and so finally,
(0.0100 kg)[(4186 J/kg C)(20C) 334 103 J/kg] Tf (0.0100 kg 1.20 kg)(2090 J/kg C) (1.20 kg)(2090 J/kg C)(15C) (0.0100 kg 1.20 kg)(2090 J/kg C) 13.2C
14.5 CONDUCTION 34.
A man consumes 3000 kcal of food in one day, converting most of it to maintain body temperature. If he loses half this energy by evaporating water (through breathing and sweating), how many kilograms of water evaporate?
Soluti on Use
Q mLv , where
Q mLv(37C) m
1 Q 3000 kcal and Lv(37C) 580 kcal/kg , 2
Q Lv(37C)
1500 kcal 2.59 kg 580 kcal/kg
161
College Physics
38.
Student Solutions Manual
Chapter 14
Compare the rate of heat conduction through a 13.0-cm-thick wall 2 10.0 m that has an area of
and a thermal conductivity twice that of glass wool with the rate of heat conduction through a window that is
0.750 cm thick and that has an area of temperature diference across each.
Soluti on
2.00 m 2 , assuming the same
Q kA(T2 T1 ) t d Use the rate of heat transfer by conduction, , and take the ratio of the wall to the window. The temperature difference for the wall and the window will be the same:
(Q / t ) wall k A d wall wall window (Q / t ) window k window Awindowd wall (2 0.042 J/s m C)(10.0 m 2 )(0.750 10 2 m) (0.84 J/s m C)(2.00 m 2 )(13.0 10 2 m) 0.0288 wall : window, or 35 :1 window : wall So windows conduct more heat than walls. This should seem reasonable, since in the winter the windows feel colder than the walls.
14.6 CONVECTION
162
College Physics
50.
Student Solutions Manual
Chapter 14
One winter day, the climate control system of a large university 3 500 m classroom building malfunctions. As a result, of excess cold air
is brought in each minute. At what rate in kilowatts must heat transfer occur to warm this air by room temperature)?
Soluti on Use
Q mcT
10.0°C (that is, to bring the air to
P in combination with the equations
Q t
and
m V
to
Q mcT VcT 1.29 kg/m 3 500 m 3 721 J/kg C10.0C P t t t 60.0 s 4 get: 7.75 10 W 77.5 kW. 14.7 RADIATION 58.
(a) Calculate the rate of heat transfer by radiation from a car radiator at
110°C into a 50.0°C
environment, if the radiator has an
1.20 - m 2
emissivity of 0.750 and a surface area. (b) Is this a significant fraction of the heat transfer by an automobile engine? To answer this, assume a horsepower of 200 hp (1.5 kW) and the efficiency of automobile engines as
163
25% .
College Physics
Soluti on
Student Solutions Manual
Chapter 14
(a) Using the Stefan-Boltzmann law of radiation, making sure to convert the temperatures into units of Kelvin, the rate of heat transfer is:
Q eA(T24 T14 ) t 4 4 (5.67 10 8 J/s m 2 K 4 )(0.750)(1 .20 m 2 ) 323 K 383 K 543 W
(b) Assuming an automobile engine is 200 horsepower and the efficiency of a gasoline engine is 25%, the engine consumes
200 horsepower 800 25%
horsepower in order to generate the 200 horsepower. Therefore, 800 horsepower is lost due to heating.
543 W
1 hp 0.728 hp 746 W
Since 1 hp = 746 W, the radiator transfers from radiation, which is not a significant fraction because the heat is primarily transferred from the radiator by other means.
164
College Physics
65.
Student Solutions Manual
Chapter 14
(a) A shirtless rider under a circus tent feels the heat radiating from the sunlit portion of the tent. Calculate the temperature of the tent canvas based on the following information: The shirtless rider’s skin temperature is
34.0°C and has an emissivity of 0.970. The exposed
2 0.400 m area of skin is . He receives radiation at the rate of 20.0 W—
half what you would calculate if the entire region behind him was
34.0°C
hot. The rest of the surroundings are at . (b) Discuss how this situation would change if the sunlit side of the tent was nearly pure white and if the rider was covered by a white tunic.
Soluti on
(a) Use the Stefan-Boltzmann law of radiation:
Q A e (T24 T14 ) , t 2
Q/t T2 T14 e( A / 2)
1/ 4
2(Q / t ) T14 eA
1/ 4
2(20.0 W) 4 (307 K) 8 2 4 2 (5.67 10 J/s m K )(0.970)(0 .400 m ) 321.63 K 48.5C
1/4
(b) A pure white object reflects more of the radiant energy that hits it, so the white tent would prevent more of the sunlight from heating up the inside of the tent, and the white tunic would prevent that radiant energy inside the tent from heating the rider. Therefore, with a white tent, the temperature would be lower
48.5C
than , and the rate of radiant heat transferred to the rider would be less than 20.0 W.
165
College Physics
70.
Student Solutions Manual
Chapter 14
Integrated Concepts (a) Suppose you start a workout on a Stairmaster, producing power at the same rate as climbing 116 stairs per minute. Assuming your mass is 76.0 kg and your efficiency is
20.0% , how long will it take for your body temperature to rise
1.00º C if all other forms of heat transfer in and out of your body are balanced? (b) Is this consistent with your experience in getting warm while exercising?
Soluti on
(a) You produce power at a rate of 685 W, and since you are 20% efficient, you must have generated:
Pgenerated
Pproduced efficiency
685 W 3425 W 0.20 .
If only 685 W of power was useful, the power available to heat
the body is
Now,
t
Pwasted
Pwasted 3425 W 685 W 2.740 103 W . Q mcT , t t
so that
mcT (76.0 kg)(3500 J/kg C)(1.00C) 97.1 s 3 Pwasted 2.74 10 W
(b) This says that it takes about a minute and a half to generate
1.00C
enough heat to raise the temperature of your body by , which seems quite reasonable. Generally, within five minutes of working out on a Stairmaster, you definitely feel warm and
166
College Physics
Student Solutions Manual
Chapter 14
probably are sweating to keep your body from overheating.
76.
Unreasonable Results (a) What is the temperature increase of an 80.0 kg person who consumes 2500 kcal of food in one day with
95.0% of the energy transferred as heat to the body? (b) What is unreasonable about this result? (c) Which premise or assumption is responsible?
Soluti on
Q mcT , so that T (a)
Q (0.950)(25 00 kcal) 36C. mc (80.0 kg)(0.83 kcal/kg C)
This says that the temperature of the person is
37C 36C 73C !
3C
(b) Any temperature increase greater than about would be unreasonably large. In this case the final temperature of the
person would rise to
73C 163F .
(c) The assumption that the person retains 95% of the energy as body heat is unreasonable. Most of the food consumed on a day is converted to body heat, losing energy by sweating and breathing, etc.
167
College Physics
Student Solutions Manual
Chapter 15
CHAPTER 15: THERMODYNAMICS 15.1 THE FIRST LAW OF THERMODYNAMICS 1.
What is the change in internal energy of a car if you put 12.0 gal of 8 1 . 3 10 J/gal . gasoline into its tank? The energy content of gasoline is
All other factors, such as the car’s temperature, are constant.
Soluti on
8 1 . 3 10 J/gal , the Using the energy content of a gallon of gasoline
energy stored in 12.0 gallons of gasoline is:
Egas (1.3 108 J/gal)(12. 0 gal) 1.6 109 J.
Therefore, the internal energy of
the car increases by this energy, so that
U 1.6 10 9 J.
7.
(a) What is the average metabolic rate in watts of a man who metabolizes 10,500 kJ of food energy in one day? (b) What is the maximum amount of work in joules he can do without breaking down fat, assuming a maximum efficiency of 20.0%? (c) Compare his work output with the daily output of a 187-W (0.250-horsepower) motor.
Soluti on
(a) The metabolic rate is the power, so that:
P
Q 10500 kJ 1000 J 1 day 122 W t 1 day 1 kJ 8.64 10 4 s 168
College Physics
Student Solutions Manual
Chapter 15
(b) Efficiency is defined to be the ratio of what we get to what we
Eff spend, or the efficiency:
W Ein
, so we can determine the work done, knowing
W Eff Ein 0.200(10500 kJ)
1000 J 2.10 106 J 1 kJ
(c) To compare with a 0.250 hp motor, we need to know how much work the motor does in one day:
746 W 8.64 10 4 s W Pt (0.250 hp)(1 day) 1.61 10 7 J . 1 hp 1 day
Wmotor 1.6110 7 J 7.67 6 Wman 2.10 10 J
So, the man’s work output is: 7.67 times less than the motor. Thus the motor produces 7.67 times the work done by the man.
15.2 THE FIRST LAW OF THERMODYNAMICS AND SOME SIMPLE PROCESSES 11.
A helium-filled toy balloon has a gauge pressure of 0.200 atm and a volume of 10.0 L. How much greater is the internal energy of the helium in the balloon than it would be at zero gauge pressure?
Soluti on
First, we must assume that the volume remains constant, so that
V1 V2 , where state 1 is that at 169
College Physics
Student Solutions Manual
P1 0.200 atm Pa 0.200 atm 1.00 atm 1.20 atm
Chapter 15
, and state 2 is that at
P2 1.00 atm . Now, we can calculate the internal energy of the system 3 U NkT 2 in state 2 using the equation , since helium is a monatomic gas:
3 3 PV 3 U 2 N 2 kT 2 kT P2V 2 2 kT 2 3 1.013 10 5 N/m 2 10 3 m 3 10.0 L 1.52 10 3 J 1 atm 2 1 atm 1L Next, we can use the ideal gas law, in combination with the equation
3 U NkT 2
to get an expression for
U1 :
U 1 3 / 2 N 1 kT N 1 P1V / kT P1 , so that U 2 3 / 2 N 2 kT N 2 P2V / kT P2 P 1.20 atm 3 3 U 1 1 U 2 1.52 10 J 1.82 10 J 1.00 atm P2
and so the internal energy inside the balloon is:
U 1 U 2 1.82 10 3 J - 1.52 103 J 300 J , greater than it would be at zero gauge pressure.
170
College Physics
Student Solutions Manual
Chapter 15
15.3 INTRODUCTION TO THE SECOND LAW OF THERMODYNAMICS: HEAT ENGINES AND THEIR EFFICIENCY 21. With
2.56 106 J
of heat transfer into this engine, a given cyclical heat
1.50 105 J
engine can do only of work. (a) What is the engine’s efficiency? (b) How much heat transfer to the environment takes place?
Soluti on
(a) The efficiency is the work out divided by the heat in:
W 1.50 105 J Eff 0.0586, or 5.86% Qh 2.56 106 J (b) The work output is the difference between the heat input and the wasted heat, so from the first law of thermodynamics:
W Qh Qc Qc Qh W 2.56 10 6 J 1.50 105 J 2.4110 6 J 15.5 APPLICATIONS OF THERMODYNAMICS: HEAT PUMPS AND REFRIGERATORS 42.
(a) What is the best coefficient of performance for a refrigerator that cools an environment at
30.0C and has heat transfer to
45.0C
another environment at ? (b) How much work in joules must be done for a heat transfer of 4186 kJ from the cold environment? (c) What is the cost of doing this if the work costs 10.0 cents per
171
College Physics
Student Solutions Manual
Chapter 15
3.60 106 J
(a kilowatt-hour)? (d) How many kJ of heat transfer occurs into the warm environment? (e) Discuss what type of refrigerator might operate between these temperatures.
Solutio n
COPref
Qc COPhp 1, W
(a) Using the equation and for the best coefficient of performance, that means make the Carnot substitution, remembering to use the absolute temperatures:
COPref
(b) Using
Qc T 1 COPhp 1 1 h 1 W EffC Th Tc Th (Th Tc ) T 243 K c 3.24 Th Tc Th Tc 318 K 243 K
COPref
QC W , again, and solve for the work done given
Qc 1000 kcal : COPref
QC Q 1000 kcal W C 308.6 kcal 309 kcal W COPref 3.24
(c) The cost is found by converting the units of energy into units of
4186 J 10.0¢ 3.59¢ 6 1 kcal 3.60 10 J
cost 308.6 kcal cents:
172
College Physics
Student Solutions Manual
(d) We want to determine
Qh ,
so using
Chapter 15
W Qh Qc
gives:
W Q h Qc 4.186 kJ 5479 kJ 1 kcal
Qh W Qc 309 kcal 1000 kcal 1309 kcal 1309 kcal
(e) The inside of this refrigerator (actually freezer) is at
22F (30.0C) , so this probably is a commercial meat packing freezer. The exhaust is generally vented to the outside, so as to not heat the building too much.
15.6 ENTROPY AND THE SECOND LAW OF THERMODYNAMICS: DISORDER AND THE UNAVAILABILITY OF ENERGY 47.
5.00 108 J
(a) On a winter day, a certain house loses of heat to the outside (about 500,000 Btu). What is the total change in entropy due to this heat transfer alone, assuming an average indoor temperature
21.0C
5.00C
of and an average outdoor temperature of ? (b) This large change in entropy implies a large amount of energy has become unavailable to do work. Where do we find more energy when such energy is lost to us?
Soluti on
S
Q T
(a) Use to calculate the change in entropy, remembering to use temperatures in Kelvin:
173
College Physics
ΔS
Student Solutions Manual
Chapter 15
1 1 Q h Qc 1 1 4 Q 5.00 10 8 J 9.78 10 J/K Th Tc 278 K 294 K Tc Th
(b) In order to gain more energy, we must generate it from things within the house, like a heat pump, human bodies, and other appliances. As you know, we use a lot of energy to keep our houses warm in the winter, because of the loss of heat to the outside.
53.
What is the decrease in entropy of 25.0 g of water that condenses
35.0C
on a bathroom mirror at a temperature of , assuming no change in temperature and given the latent heat of vaporization to be 2450 kJ/kg?
Soluti on
When water condenses, it should seem reasonable that its entropy decreases, since the water gets ordered, so
Q mLv (25.0 10 3 kg)( 2450 10 3 J/kg) S 199 J/K T T 308 K The entropy of the water decreases by 199 J/K when it condenses.
15.7 STATISTICAL INTERPRETATION OF ENTROPY AND THE SECOND LAW OF THERMODYNAMICS: THE UNDERLYING EXPLANATION 59.
(a) If tossing 100 coins, how many ways (microstates) are there to get the three most likely macrostates of 49 heads and 51 tails, 50 heads and 50 tails, and 51 heads and 49 tails? (b) What percent of the total possibilities is this? (Consult Table 15.4.)
174
College Physics
Soluti on
Student Solutions Manual
Chapter 15
(a) From Table 15.4, we can tabulate the number of ways of getting the three most likely microstates: No. of ways
H
T
49
51
9.9 10 28
50
50
1.0 10 29
51
49
9.9 1028
29 29 2 . 98 10 3 . 0 10 Total =
1.27 10 30
(b) The total number of ways is , so the percent represented by the three most likely microstates is:
total # of ways to get 3 macrostate s 3.0 10 29 % 0.236 24% total # of ways 1.27 10 30
175
College Physics
Student Solutions Manual
Chapter 16
CHAPTER 16: OSCILLATORY MOTION AND WAVES 16.1 HOOKE’S LAW: STRESS AND STRAIN REVISITED 2.
Soluti on
It is weigh-in time for the local under-85-kg rugby team. The bathroom scale used to assess eligibility can be described by Hooke’s law and is depressed 0.75 cm by its maximum load of 120 kg. (a) What is the spring’s efective spring constant? (b) A player stands on the scales and depresses it by 0.48 cm. Is he eligible to play on this under-85-kg team?
(a) Using the equation gives:
F kx, where m 120 kg and x 0.750 10 2 m
F mg 120 kg 9.80 m/s 2 k 1.57 105 N/m 2 x x 0.750 10 m The force constant must be a positive number.
F kx
kx 1.57 105 N/m 0.0048 m mg kx m 76.90 kg 77 kg 2 g 9.80 m/s (b) Yes, he is eligible to play.
176
College Physics
Student Solutions Manual
Chapter 16
5. When an 80.0-kg man stands on a pogo stick, the spring is compressed 0.120 m. (a) What is the force constant of the spring? (b) Will the spring be compressed more when he hops down the road? Soluti on
(a) Using the equation
F kx, where m 80 kg and x 0.120 m
gives:
F mg 80.0 kg 9.80 m/s 2 k 6.53 103 N/m x x 0.120 m (b) Yes, when the man is at his lowest point in his hopping the spring will be compressed the most.
16.2 PERIOD AND FREQUENCY IN OSCILLATIONS 7. What is the period of
Soluti on
60.0 Hz
f Using the equation
T
1 T
electrical power?
1 f 60 . 0 Hz 60 . 0 s where gives:
1 1 1.67 10 2 s 16.7 ms f 60.0 Hz
16.3 SIMPLE HARMONIC MOTION: A SPECIAL PERIODIC MOTION
177
College Physics
15.
Student Solutions Manual
Chapter 16
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s?
Soluti on
m k
T 2 Using the equation
for each mass:
T1 2
m1 m ; T2 2 2 , k k
So that the ratio of the periods can be written in terms of their
masses:
T1 m 1 m2 T2 m2
2
2
T 2.00 s 1 m1 (0.500 kg) T 1.50 s 2
The final mass minus the initial mass gives the mass that must be
added:
Δm m2 m1 0.889 kg 0.500 kg 0.389 kg
16.4 THE SIMPLE PENDULUM 24.
What is the period of a 1.00-m-long pendulum?
Soluti on
T 2 Use the equation
T 2
L g
, where
L 1.00 m 2 2.01 s g 9.80 m/s 2
178
L 1.00 m :
College Physics
30.
Student Solutions Manual
Chapter 16
(a) What is the efect on the period of a pendulum if you double its length? (b) What is the efect on the period of a pendulum if you decrease its length by 5.00%?
Soluti on
T 2 (a) Use the following equation terms of the old period, where
T ' 2
L g , and write the new period in
L 2L :
2L L 2 2 2T . g g 2
The period increases by a factor 2.
(b) This time,
L 0.950 L , so that
T ' 2
0.950 L 0.950 T 97.5T . g
16.5 ENERGY AND THE SIMPLE HARMONIC OSCILLATOR 36.
Engineering Application Near the top of the Citigroup Center
4.00 105 kg
building in New York City, there is an object with mass of on springs that have adjustable force constants. Its function is to dampen wind-driven oscillations of the building by oscillating at the same frequency as the building is being driven—the driving force is transferred to the object, which oscillates instead of the entire building. (a) What efective force constant should the springs have to make the object oscillate with a period of 2.00 s? (b) What energy 179
College Physics
Student Solutions Manual
Chapter 16
is stored in the springs for a 2.00-m displacement from equilibrium?
Soluti on
T 2 (a) Using the equation gives:
m , k where
m 4.00 10 6 kg and T 2.00 s ,
4 2 m 4π 2 (4.00 105 kg) k 2 3.95 10 6 N/m 2 T (2.00 s)
(b) Using the equation
1 PEel kx2 2 , where
x 2.00 m , gives:
1 1 PEel kx2 (3.95 10 6 N/m)(2.00 m) 2 7.90 10 6 J 2 2 16.6 UNIFORM CIRCULAR MOTION AND SIMPLE HARMONIC MOTION 37.
(a) What is the maximum velocity of an 85.0-kg person bouncing on
1.50 10 N/m
6 a bathroom scale having a force constant of , if the amplitude of the bounce is 0.200 cm? (b) What is the maximum energy stored in the spring?
180
College Physics
Student Solutions Manual
Soluti on
v max (a) Use the equation
harmonic motion, where
Chapter 16
k X m , since the person bounces in simple
X 0.200 10 2 m :
k 1.50 10 6 N/m v max X (0.200 10 2 m) 0.266 m/s m 85.0 kg
(b)
2 1 1 PE kX 2 1.50 10 6 N/m 0.200 10 2 m 3.00 J 2 2
16.8 FORCED OSCILLATIONS AND RESONANCE 45.
Suppose you have a 0.750- kg object on a horizontal surface connected to a spring that has a force constant of 150 N/m. There is simple friction between the object and surface with a static
μ 0.100
coefficient of friction s . (a) How far can the spring be stretched without moving the mass? (b) If the object is set into oscillation with an amplitude twice the distance found in part (a),
μ 0.0850 , what total and the kinetic coefficient of friction is k distance does it travel before stopping? Assume it starts at the maximum amplitude. Soluti
(a) We know that there are two forces acting on the mass in the 181
College Physics
Student Solutions Manual
on
net F s N kx 0,
horizontal direction:
spring is stretched. We know that
Chapter 16
where
x is the distance the
s 0.100, m 0.750 kg, k 150 N/m,
and since the mass is on a horizontal surface, then solve for
N mg . We can
x:
s mg (0.100)(0. 750 kg)(9.80 m/s 2 ) x 4.90 10 3 m k 150 N/m So, the maximum distance the spring can be stretched without
moving the mass is
4.90 10 3 m.
(b) From Example 16.7, 2 1 / 2 k 2 x 0.5(150 N/m)(9.80 10 3 m) 2 d
k mg
2
(0.0850)(0 .750 kg)(9.80 m/s )
1.15 10 2 m
16.9 WAVES 50.
Soluti on
How many times a minute does a boat bob up and down on ocean waves that have a wavelength of 40.0 m and a propagation speed of 5.00 m/s?
v Use the equation w
f
:
182
College Physics
v w f f
Student Solutions Manual
Chapter 16
v w 5.00 m/s 0.125 Hz 40.0 m
Now that we know the frequency, we can calculate the number of oscillation:
N ft (0.125 Hz)(60.0 s) 7.50 times 55.
Your ear is capable of diferentiating sounds that arrive at the ear just 1.00 ms apart. What is the minimum distance between two speakers that produce sounds that arrive at noticeably diferent times on a day when the speed of sound is 340 m/s?
Soluti on Use the definition of velocity, time:
d v , t
given the wave velocity and the
d vw t (340 m/s)(1.00 10 3 s) 0.340 m 34.0 cm Therefore, objects that are 34.0 cm apart (or farther) will produce sounds that the human ear can distinguish.
16.10 SUPERPOSITION AND INTERFERENCE 62.
Three adjacent keys on a piano (F, F-sharp, and G) are struck simultaneously, producing frequencies of 349, 370, and 392 Hz. What beat frequencies are produced by this discordant combination?
Soluti
There will be three different beat frequencies because of the 183
College Physics
on
Student Solutions Manual
Chapter 16
interactions between the three different frequencies.
Using the equation
f B f1 f 2
gives:
f B1 370 Hz 349 Hz 21 Hz , f B 2 392 Hz 370 Hz 22 Hz f B 3 392 Hz 349 Hz 43 Hz
16.11 ENERGY IN WAVES: INTENSITY 71.
W/m 2
Medical Application (a) What is the intensity in of a laser beam used to burn away cancerous tissue that, when 90.0% absorbed, puts 500 J of energy into a circular spot 2.00 mm in diameter in 4.00 s? (b) Discuss how this intensity compares to the 2 1 W/m average intensity of sunlight (about ) and the implications that
would have if the laser beam entered your eye. Note how your answer depends on the time duration of the exposure.
184
College Physics
Student Solutions Manual
Soluti on (a) Using the equations
I
P A
and
P
Chapter 16
W t , we see that
W Pt (0.900 IA)t 0.900 Ir 2 t , so that : I
W 500 J 1.11 10 7 W/m 2 2 2 0.900r t 0.900π 2.00 10 3 m (4.00 s)
10 4
(b) The intensity of a laser is about times that of the sun, so clearly lasers can be very damaging if they enter your eye! This means that starting into a laser for one second is equivalent to starting at the sun for 11 hours without blinking!
185
College Physics
Student Solutions Manual
Chapter 17
CHAPTER 17: PHYSICS OF HEARING 17.2 SPEED OF SOUND, FREQUENCY, AND WAVELENGTH 1.
Soluti on
When poked by a spear, an operatic soprano lets out a 1200-Hz shriek. What is its wavelength if the speed of sound is 345 m/s?
v Use the equation w
7.
f
, where
f 1200 Hz
v and w
345 m/s :
v w 345 m/s 0.288 m f 1200 Hz
Dolphins make sounds in air and water. What is the ratio of the wavelength of a sound in air to its wavelength in seawater? Assume air temperature is
20.0C .
186
College Physics
Soluti on
Student Solutions Manual
Chapter 17
The wavelengths of sounds in air and water are different because the
v speed of sound is different in air and water. We know seawater v (from Table 17.1) and air
343 m/s
at
20.0C from Problem 17.5, so
v f v fseawater from the equation w we know seawater and we can determine the ratio of the wavelengths: vair vseawater
air seawater
air seawater
1540 m/s
vair fair
, so
343 m/s 0.223 1540 m/s
17.3 SOUND INTENSITY AND SOUND LEVEL 13.
Soluti on
The warning tag on a lawn mower states that it produces noise at a level of 91.0 dB. What is this in watts per meter squared?
I I 0
10 log 10
, where
I 0 10 12 W/m 2
, so that
I I 0 10 / 10
, and
I (1.00 10 12 W/m 2 )1091.0 /10.0 1.26 10 3 W/m 2 (To calculate an exponent that is not an integer, use the your calculator.)
187
x y -key on
College Physics
21.
Student Solutions Manual
Chapter 17
People with good hearing can perceive sounds as low in level as
8.00 dB
at a frequency of 3000 Hz. What is the intensity of this sound in watts per meter squared?
Soluti on
I , so that I 0
β 10log
I I 0 10 / 10 (1.00 10 12 W/m 2 )10 8.00 / 10.0 1.58 10 13 W/m 2 27.
(a) Ear trumpets were never very common, but they did aid people with hearing losses by gathering sound over a large area and concentrating it on the smaller area of the eardrum. What decibel increase does an ear trumpet produce if its sound gathering area is
900 cm 2
2 0 . 500 cm and the area of the eardrum is , but the trumpet
only has an efficiency of 5.00% in transmitting the sound to the eardrum? (b) Comment on the usefulness of the decibel increase found in part (a).
Soluti on (a) Using the equation
P I , A
we see that for the same power,
I e A1 (0.0500)(9 00 cm 2 ) I 2 A1 90 I1 A2 , so for a 5.00% efficiency: I 1 Ae 0.500 cm 2 .
Now, using the equation
I I 0
dB 10 log 10
188
, and remembering that
College Physics
Student Solutions Manual
Chapter 17
A log A log B log , B we see that: Ie I I 10 log t 10log e 10log(90) 19.54 dB 19.5 dB I0 I0 It
e t 10 log
(b) This increase of approximately 20 dB increases the sound of a normal conversation to that of a loud radio or classroom lecture (see Table 17.2). For someone who cannot hear at all, this will not be helpful, but for someone who is starting to lose their ability to hear, it may help. Unfortunately, ear trumpets are very cumbersome, so even though they could help, the inconvenience makes them rather impractical.
17.4 DOPPLER EFFECT AND SONIC BOOMS 33.
A spectator at a parade receives an 888-Hz tone from an oncoming trumpeter who is playing an 880-Hz note. At what speed is the musician approaching if the speed of sound is 338 m/s?
Soluti on
f obs f s
vw v w vs
We can use the equation (with the minus sign because the source is approaching to determine the speed of the musician
(the source), given
vs
f obs 888 Hz, f s 880 Hz, and v w 338 m/s :
vw ( f obs f s ) (338 m/s)(888 Hz 880 Hz) 3.05 m/s f obs 888 Hz
189
College Physics
Student Solutions Manual
Chapter 17
17.5 SOUND INTERFERENCE AND RESONANCE: STANDING WAVES IN AIR COLUMNS 39.
Soluti on
What beat frequencies will be present: (a) If the musical notes A and C are played together (frequencies of 220 and 264 Hz)? (b) If D and F are played together (frequencies of 297 and 352 Hz)? (c) If all four are played together?
(a) Using the equation
f B f1 f 2
:
f B,A&C f1 f 2 264 Hz 220 Hz 44 Hz
(b)
f B,D&F f1 f 2 352 Hz 297 Hz 55 Hz
(c) We get beats from every combination of frequencies, so in addition to the two beats above, we also have:
f B,F&A = 352 Hz 220 Hz = 132 Hz; f B, F&C = 352 Hz 264 Hz = 88 Hz; f B,D&C 297 Hz 264 Hz 33 Hz; f B, D&A 297 Hz 220 Hz 77 Hz
45.
How long must a flute be in order to have a fundamental frequency of 262 Hz (this frequency corresponds to middle C on the evenly tempered chromatic scale) on a day when air temperature is It is open at both ends.
190
20.0C ?
College Physics
Soluti on
Student Solutions Manual
Chapter 17
We know that the frequency for a tube open at both ends is:
v for n 1,2,3... 2 L
f n n
If the fundamental frequency
f1 the length:
51.
v w 331 m/s
T (K ) 273 K , since we are told the
T (K) 293 K (331 m/s) 342.9 m/s. 273 K 273 K
L Therefore,
f1 262 Hz , we can determine
vw v L w 2L 2 f1 . We need to determine the speed of
sound, from the equation air temperature:
vw (331 m/s)
n 1 is
342.9 m/s 0.654 m 65.4 cm. 2(262 Hz)
Calculate the first overtone in an ear canal, which resonates like a 2.40-cm-long tube closed at one end, by taking air temperature to
37.0C
be . Is the ear particularly sensitive to such a frequency? (The resonances of the ear canal are complicated by its nonuniform shape, which we shall ignore.)
191
College Physics
Student Solutions Manual
Chapter 17
Soluti on First, we need to determine the speed of sound at equation
v w (331 m/s)
T (K) 310 K (331 m/s) 352.7 m/s. 273 K 273 K
Next, for tubes closed at one end:
v f n n w for n 1,3,5... 4L
determine the frequency of the first overtone
f3 3
37.0C , using the
, we can
n 3
352.7 m/s 1.10 10 4 Hz 11.0 kHz 4(0.0240 m) .
The ear is not particularly sensitive to this frequency, so we don’t hear overtones due to the ear canal.
17.6 HEARING 57.
What are the closest frequencies to 500 Hz that an average person can clearly distinguish as being diferent in frequency from 500 Hz? The sounds are not present simultaneously.
192
College Physics
Soluti on
Student Solutions Manual
Chapter 17
We know that we can discriminate between two sounds if their frequencies differ by at least 0.3%, so the closest frequencies to 500 Hz that we can distinguish are
f = (500 Hz)(1 ± 0.003) = 498.5 Hz and 501.5 Hz . 63.
What is the approximate sound intensity level in decibels of a 600-Hz tone if it has a loudness of 20 phons? If it has a loudness of 70 phons?
Soluti on
From Figure 17.36: a 600 Hz tone at a loudness of 20 phons has a sound level of about 23 dB, while a 600 Hz tone at a loudness of 70 phons has a sound level of about 70 dB.
69.
A person has a hearing threshold 10 dB above normal at 100 Hz and 50 dB above normal at 4000 Hz. How much more intense must a 100-Hz tone be than a 4000-Hz tone if they are both barely audible to this person?
193
College Physics
Soluti on
Student Solutions Manual
Chapter 17
From Figure 17.36, the 0 phons line is normal hearing. So, this person can barely hear a 100 Hz sound at 10 dB above normal, requiring a
47 dB sound level ( 1 ). For a 4000 Hz sound, this person requires 50
dB above normal, or a 43 dB sound level ( 2 ) to be audible. So, the 100 Hz tone must be 4 dB higher than the 4000 Hz sound. To calculate the difference in intensity, use the equation
I1 I I 10 log 2 10 log 1 I2 I0 I0
1 2 10 log
and convert the difference in decibels to a ratio of intensities. Substituting in the values from above gives:
I1 I 47 dB 43 dB 4 dB, or 1 10 4/10 2.5 I2 I2
10 log
So the 100 Hz tone must be 2.5 times more intense than the 4000 Hz sound to be audible by this person.
17.7 ULTRASOUND 77.
(a) Calculate the minimum frequency of ultrasound that will allow you to see details as small as 0.250 mm in human tissue. (b) What is the efective depth to which this sound is efective as a diagnostic probe?
194
College Physics
Soluti on
Student Solutions Manual
Chapter 17
v (a) From Table 17.1, the speed of sound in tissue is w
v using w
f
1540 m/s,
so
, we find the minimum frequency to resolve 0.250
mm details is:
vw 1540 m/s 6 6.16 10 Hz λ 0.250 10 3 m
f
(b) We know that the accepted rule of thumb is that you can effectively scan to a depth of about
500 into tissue, so the
3 500 50 0 0.250 10 m 0.125 m 12.5 cm effective scan depth is:
83.
A diagnostic ultrasound echo is reflected from moving blood and returns with a frequency 500 Hz higher than its original 2.00 MHz. What is the velocity of the blood? (Assume that the frequency of 2.00 MHz is accurate to seven significant figures and 500 Hz is accurate to three significant figures.)
Soluti on
This problem requires two steps: (1) determine the frequency the blood receives (which is the frequency that is reflected), then (2) determine the frequency that the scanner receives. At first, the blood
v w vs v w
f obs f s
is like a moving observer, and the equation gives the frequency it receives (with the plus sign used because the blood is
approaching):
vw vb v w
f b f s
v (where b = blood velocity). Next, this 195
College Physics
Student Solutions Manual
Chapter 17
frequency is reflected from the blood, which now acts as a moving
vw f obs f s v v w s
source. The equation (with the minus sign used because the blood is still approaching) gives the frequency received
vw v v vw v v f s w b f s w b f 'obs f b vw vb vw vw vb vw vb by the scanner: Solving for the speed of blood gives:
f 'obs f s (1540 m/s)(500 Hz) 0.192 m/s 6 6 f ' f (2.00 10 Hz 500 Hz) 2.00 10 Hz obs s
v b v w
The blood’s speed is 19.2 cm/s.
196
College Physics
Student Solutions Manual
Chapter 18
CHAPTER 18: ELECTRIC CHARGE AND ELECTRIC FIELD 18.1 STATIC ELECTRICITY AND CHARGE: CONSERVATION OF CHARGE
1.
Common static electricity involves charges ranging from nanocoulombs to microcoulombs. (a) How many electrons are needed to form a charge of –2.00 nC? (b) How many electrons must be removed from a neutral object to leave a net charge of
197
0.500 C ?
College Physics
Solutio n
Student Solutions Manual
Chapter 18
qe = 1.6 10 19 C
(a) Since one electron has charge of , we can determine the number of electrons necessary to generate a total charge of -2.00 nC by using the equation
Nqe= Q
, so that
Q 2.00 10 9 C N 1.25 1010 electrons . 19 qe 1.60 10 C (b) Similarly we can determine the number of electrons removed from a neutral object to leave a charge of that:
0.500 C
of charge so
0.500 10 6 C N 3.13 1012 electrons 19 1.60 10 C 18.2 CONDUCTORS AND INSULATORS
7.
2.00 μC
A 50.0 g ball of copper has a net charge of . What fraction of the copper’s electrons has been removed? (Each copper atom has 29 protons, and copper has an atomic mass of 63.5.)
198
College Physics
Solutio n
Student Solutions Manual
Chapter 18
N A = 6.02 1023
Recall that Avogadro’s number is atoms/mole. Now we need to determine the number of moles of copper that are present.
n We do this using the mass and the atomic mass:
m 50.0 g A 63.5 g/mol
So since there are 29 protons per atom we can determine the number of protons,
Np
, from:
N p nN A 29 protons/at om 50.0 gm 63 . 5 g/mol
6.02 10 23 atoms 29 protons 1.375 10 25 protons mol cu atom
Since there is the same number of electrons as protons in a neutral atom, before we remove the electrons to give the copper a net 25 1.375 10 charge, we have electrons.
Next we need to determine the number of electrons we removed to
2.00 C
2.00 C
leave a net charge of . We need to remove of charge, so the number of electrons to be removed is given by
199
College Physics
Student Solutions Manual
Q 2.00 10 6 C N e,removed = 1.25 1013 19 qe 1.60 10 C
Chapter 18
electrons removed.
Finally we can calculate the fraction of copper’s electron by taking the ratio of the number of electrons removed to the number of electrons originally present:
N e,removed N e,initially
1.25 1013 9.09 10 13 25 1.375 10
18.3 COULOMB’S LAW
13.
Two point charges are brought closer together, increasing the force between them by a factor of 25. By what factor was their separation decreased?
200
College Physics
Student Solutions Manual
Solutio n
F1 k Using the equation
Chapter 18
q1 q2 r1
2
, we see that the force is inversely
F1 K proportional to the separation distance squared, so that
F2 K and
q1q2 2 r1
q1q2 2 r2
Since we know the ratio of the forces we can determine the ratio of
the separation distances:
F1 F2
r 2 r1
2
so that
r2 F 1 1 1 r1 F2 25 5
The separation decreased by a factor of 5.
20.
(a) Common transparent tape becomes charged when pulled from a dispenser. If one piece is placed above another, the repulsive force can be great enough to support the top piece’s weight. Assuming equal point charges (only an approximation), calculate the magnitude of the charge if electrostatic force is great enough to support the weight of a 10.0 mg piece of tape held 1.00 cm above another. (b) Discuss whether the magnitude of this charge is consistent with what is typical of static electricity.
201
College Physics
Solutio n
Student Solutions Manual
Chapter 18
(a) If the electrostatic force is to support the weight of 10.0 mg piece of tape, it must be a force equal to the gravitational force on the
F1 k
q1 q2 r1
2
tape, so using the equation and the assumption that the point charges are equal, we can set electrostatic force equal to gravitational force.
r 2 mg q1 q 2 kq 2 F k 2 2 mg q r r k
1/ 2
0.0100 m 2 10.0 10 6 kg 9.80 m/s 2 9.00 109 N m 2 /C 2
1/ 2
1.04 10 9 C.
(b) This charge is approximately 1 nC, which is consistent with the magnitude of the charge of typical static electricity.
25.
5.00 μC
3.00 μC
Point charges of and are placed 0.250 m apart. (a) Where can a third charge be placed so that the net force on it is zero? (b) What if both charges are positive?
Solutio n
(a) We know that since the negative charge is smaller, the third charge should be placed to the right of the negative charge if the net force on it to be zero. So if we want
202
Fnet F1 F2 0
, we can
College Physics
Student Solutions Manual
F1 k
q1 q2
use the equation distances:
r1
2
to write the forces in terms of
q1 q2 Kq1q2 Kq2 q 2 2 0 Kq r12 r22 r1 r2 , or since
5 10 6 C 3 10 6 , 0.250 m d 2 d 2
Chapter 18
d or
r1 = 0.250 m + d
3 0.250 m 3 d 5 5
r and 2
d,
so that
3 0.250 m 5 d 0.859 m 3 3 d 1 0.250 m 3 1 5 5 5 and finally,
The charge must be placed at a distance of 0.859 m to the far side of the negative charge.
(b) This time we know that the charge must be placed between the two positive charges and closer to the force to be zero. So if we want
203
3 C charge for the net
Fnet F1 F2 0
, we can again use
College Physics
Student Solutions Manual
F1 k
Chapter 18
q1 q 2 r1
2
to write the forces in terms of distances:
q q Kq1q2 Kq2 q 2 Kq 12 22 0 2 r1 r2 r1 r2
Or since 2
r2
5 10 6 C 3 10 6 r1 = 0.250m r2 2 2 0.250 r2 r2
, or
3 0.250 m r2 2 , or r2 3 0.250 m r2 5 5 , and finally
3 0.250 m 5 r2 0.109 m 3 1 5
The charge must be placed at a distance of 0.109m from the charge.
3 C
18.4 ELECTRIC FIELD: CONCEPT OF A FIELD REVISITED
204
College Physics
32.
Student Solutions Manual
Chapter 18
(a) Find the direction and magnitude of an electric field that exerts a
4.80 1017 N westward force on an electron. (b) What magnitude and direction force does this field exert on a proton?
Solutio n
F qE
(a) Using the equation we can find the electric field caused by a given force on a given charge (taking eastward direction to be positive):
F 4.80 10 17 C E 300 N/C (eas t) q 1.60 10 19 C (b) The force should be equal to the force on the electron only in the opposite direction. Using
F qE
we get
F qE 1.60 10 19 C 300 N/C 4.80 10 17 N (east)
, as we expected.
18.5 ELECTRIC FIELD LINES: MULTIPLE CHARGES
33. (a) Sketch the electric field lines near a point charge same for a point charge
3.00q . 205
q . (b) Do the
College Physics
Student Solutions Manual
Chapter 18
Solutio n +q
(a)
– 3q
(b)
34.
Sketch the electric field lines a long distance from the charge distributions shown in Figure 18.26(a) and (b).
Solutio n – 2q
(a)
206
College Physics
Student Solutions Manual
Chapter 18
field of two opposite charges
(b)
No net charge is seen from far away.
18.7 CONDUCTORS AND ELECTRIC FIELDS IN STATIC EQUILIBRIUM
37.
Sketch the electric field lines in the vicinity of the conductor in Figure 18.48, given the field was originally uniform and parallel to the object’s long axis. Is the resulting field small near the long side of the object?
Solutio n – – – – –– –
–
+
–
+
+
++ + + + +
The field lines deviate from their original horizontal direction because the charges within the object rearrange. The field lines will come into the object perpendicular to the surface and will leave the other side of the object perpendicular to the surface.
207
College Physics
Student Solutions Manual
Chapter 18
Yes, the field is smaller near the long side of the object. This is evident because there are fewer field lines near the long side of the object and there are more field lines near the point of the object.
44.
(a) Find the total Coulomb force on a charge of 2.00 nC located at
x 4.00 cm in Figure 18.52(b), given that q 1.00 μC . (b) Find the xposition at which the electric field is zero in Figure 18.52(b).
Solutio n
(a) According to Figure 18.52, the point charges are given by
q1 2.00 C at x 1.00 cm; q5 1.00 C at x 5.00 cm; q8 3.00 C at x 8.00 cm and q14 1.00 C at x 14.0 cm
If a
2 nC
charge is placed at
x 4.00 cm,
the force it feels from
F
Kq1 q r12 . The net force
other charges is found from the equation is the vector addition of the force due to each point charge, but since the point charges are all along the x-axis, the forces add like numbers; thus the net force is given by
F
q1 q5 q8 q14 Kq1q Kq5 q Kq8 q Kq14 q 2 2 2 2 Kq 2 2 2 2 r1 r5 r8 r14 r1 r5 r8 r14
208
College Physics
Student Solutions Manual
Chapter 18
q To the right, notice that the term involving the charge 1 has the opposite sign because it pulls in the opposite direction than the other three charges. Substituting in the values given:
9.00 10 9 N.m 2 2.00 10 9 C F 2 C 6 2.00 10 C 1.00 10 6 C 3.00 10 6 C 2 2 2 0.0500 m 0.0400 m 0.0800 m 0.0400 m 0.0400 m 0.0100 m 6 1.00 10 C 2 0.140 m 0.0400 m = - 0.252 N(right) or 0.252 N to the left (b) The only possible location where the total electric field could be zero is between 5.00 and 8.00 cm, since in that range the closest charges create forces on the test charge in opposite directions. So that is the only region we will consider. For the total electric field to be zero between 5.00 and 8.00 cm, we know that:
E
Kq1 Kq5 Kq8 Kq14 2 0 r12 r52 r82 r14
Dividing by common factors and ignoring units (but remembering x has a unit of cm), we can get a simplified expression:
y
2 1 3 1 x 1 2 x 5 2 x 8 2 x 14 2
We can graph this function, using a graphing calculator or graphing program, to determine the values of x that yield
209
y 0.
College Physics
Student Solutions Manual
Chapter 18
Therefore the total electric field is zero at
50.
x 6.07 cm .
(a) Find the electric field at the center of the triangular configuration
q of charges in Figure 18.54, given that a
2.50 nC qb 8.00 nC ,
, and
qc 1.50 nC . (b) Is there any combination of charges, other than qa qb qc
, that will produce a zero strength electric field at the center of the triangular configuration?
Solutio n
(a) To determine the electric field at the center, we first must determine the distance from each of the charges to the center of the triangle. Since the triangle is equilateral, the center of the triangle will be halfway across the base and 1/3 of the way up the height. To determine the height use the Pythagorean theorem, or
h 25.0 cm 12.5 cm 21.7 cm 2
2
the height is given by . So the distance from each charge to the center of the triangle is 2/3 of
r 21.7 cm, or
2 21.7 cm 14.4 cm. Since E k Q2 , 3 r
9 qa 9 2 2 2.50 10 C 1085 N/C E a k 2 9.00 10 N m /C 2 r 0.144 m
below the horizontal,
210
at a
90 angle
College Physics
Student Solutions Manual
Chapter 18
9 qb 9 2 2 8.00 10 C 3472 N/C E b k 2 9.00 10 N m /C 2 r 0.144 m
at a
30 angle
below the horizontal, and 9 qc 9 2 2 1.50 10 C 681.0 N/C Ec k 2 9.00 10 N m /C 2 r 0.144 m
30
at a angle above the horizontal. Adding the vectors by components gives:
E x Ea cos 90 E b cos 30 E c cos 30
E x 0 N/C 3472 N/C 0.860 681.0 N/C 0.8660 3597 N/C
E y Ea sin 90 E b sin 30 E c sin 30
E y 1085 N/C - 3472 N/C 0.5000 681 N/C 0.5000 2481 N/C
So that the electric field is given by:
E E x E y 3597 N/C 2481 N/C 4370 N/C 2
tan 1
2
Ey Ex
tan 1
2
2
and
2481 N/C 34.6 , or E 4.37 10 3 N/C, 34.6 3597 N/C
below the horizontal.
q qb qc (b) No, there are no combinations other than a that will produce a zero strength field at the center of the triangular 211
College Physics
Student Solutions Manual
Chapter 18
configuration because of the vector nature of the electric field. Consider the two cases: (1) all charges have the same sign and (2) one charge have a different sign than the other two. For case (1), symmetry dictates that the charges must be all the same magnitude, if a test charge is not to feel a force at the center of the triangle. For case (2), a positive test charge would feel a force towards the negative charge(s) and away from the positive charge(s). Therefore there is no combination that would produce a zero strength electric field at the center of the triangle.
18.8 APPLICATIONS OF ELECTROSTATICS
56.
q q What can you say about two charges 1 and 2 , if the electric field q q one-fourth of the way from 1 to 2 is zero?
Solutio n
q q If the electric field is zero 1/4 from the way of 1 and 2 , then we know from the equation
Ek
Q r2
E1 E2 that
q 2 3x 2 9 q1 x 2
q q The charge 2 is 9 times larger than 1 . 212
Kq1 Kq2 x 2 3x 2
so that
College Physics
Student Solutions Manual
Chapter 18
65.
Unreasonable Results (a) Two 0.500 g raindrops in a thunderhead are 1.00 cm apart when they each acquire 1.00 mC charges. Find their acceleration. (b) What is unreasonable about this result? (c) Which premise or assumption is responsible?
Solutio n
(a) To determine the acceleration, use Newton's Laws and the
equation
F k
F ma
q1 q 2 r2
:
kq1 q 2 r2
kq2 9.00 10 9 N m 2 C 1.00 10 3 C a 2 1.80 1011 m s 2 2 3 mr 0.500 10 kg 0.0100 m 2
2
(b) The resulting acceleration is unreasonably large; the raindrops would not stay together.
(c) The assumed charge of
1.00 mC
electricity is on the order of
1 C
213
is much too great; typical static or less.
College Physics
Student Solutions Manual
Chapter 19
CHAPTER 19: ELECTRIC POTENTIAL AND ELECTRIC FIELD 19.1 ELECTRIC POTENTIAL ENERGY: POTENTIAL DIFFERENCE 6.
Integrated Concepts (a) What is the average power output of a heart defibrillator that dissipates 400 J of energy in 10.0 ms? (b) Considering the high-power output, why doesn’t the defibrillator produce serious burns?
Soluti on
(a) The power is the work divided by the time, so the average power is:
P
W 400 J 4.00 104 W -3 t 10.0 10 s .
(b) A defibrillator does not cause serious burns because the skin conducts electricity well at high voltages, like those used in defibrillators. The gel used aids in the transfer of energy to the body, and the skin doesn’t absorb the energy, but rather, lets it pass through to the heart.
19.2 ELECTRIC POTENTIAL IN A UNIFORM ELECTRIC FIELD
214
College Physics
17.
Student Solutions Manual
Chapter 19
(a) Will the electric field strength between two parallel conducting 6 3 . 0 10 V/m ) if the plates exceed the breakdown strength for air (
plates are separated by 2.00 mm and a potential diference of
5.0 103 V
is applied? (b) How close together can the plates be with this applied voltage?
Soluti on
E
VAB d , we can determine the electric field
(a) Using the equation strength produced between two parallel plates since we know their separation distance and the potential difference across the plates:
VAB 5.0 103 V E 2.5 106 V/m 3 10 6 V/m. -3 d 2.00 10 m No, the field strength is smaller than the breakdown strength for air.
E
VAB d , we can now solve for the separation
(b) Using the equation distance, given the potential difference and the maximum electric field strength:
VAB 5.0 10 3 V d 1.67 10 -3 m 1.7 mm . 6 E 3.0 10 V/m So, the plates must not be closer than 1.7 mm to avoid exceeding the breakdown strength of air.
215
College Physics
23.
Student Solutions Manual
Chapter 19
An electron is to be accelerated in a uniform electric field having a 6 2 . 00 10 V/m . (a) What energy in keV is given to the strength of
electron if it is accelerated through 0.400 m? (b) Over what distance would it have to be accelerated to increase its energy by 50.0 GeV?
Soluti on
KE qV
(a) Using the equation , we can get an expression for the change in energy terms of the potential difference and its charge.
E
VAB d
Also, we know from the equation that we can express the potential difference in the terms of the electric field strength and the distance traveled, so that:
KE qVAB qEd
1 eV 19 1.60 10 J
(1.60 10 19 C)( 2.00 10 6 V/m )(0.400 m)
1 keV 1000 eV
800 keV In other words, the electron would gain 800 keV of energy if accelerated over a distance of 0.400 m.
(b) Using the same expression in part (a), we can now solve for the distance traveled:
1.60 10 19 J KE (50.0 109 eV) d qE (1.60 10 19 C)( 2.00 10 6 v/m ) 1 eV 2.50 10 4 m 25.0 km
216
College Physics
Student Solutions Manual
Chapter 19
So, the electron must be accelerated over a distance of 25.0 km to gain 50.0 GeV of energy.
19.3 ELECTRIC POTENTIAL DUE TO A POINT CHARGE 29.
2 5 . 00 10 V If the potential due to a point charge is
at a distance of 15.0 m, what are the sign and magnitude of the charge?
Soluti on
V
kQ r , we can determine the charge given the
Given the equation potential and the separation distance:
Q
rV 15.0 m 500 V 8.33 10 7 C k 9.00 10 9 N m 2 / C 2
The charge is positive because the potential is positive.
19.4 EQUIPOTENTIAL LINES 38.
q
q
Figure 19.28 shows the electric field lines near two charges 1 and 2 , the first having a magnitude four times that of the second. Sketch the equipotential lines for these two charges, and indicate the direction of increasing potential.
Soluti on
To draw the equipotential lines, remember that they are always perpendicular to electric fields lines. The potential is greatest (most
positive) near the positive charge, 217
q2 ,
and least (most negative) near
College Physics
Student Solutions Manual
Chapter 19
q the negative charge, 1 . In other words, the potential increases as you move out from the charge
q1 ,
and it increases as you move
q towards the charge 2 .
19.5 CAPACITORS AND DIELETRICS 46. What charge is stored in a it?
Soluti on
180 μF capacitor when 120 V is applied to
Q CV
Using the equation , we can determine the charge on a capacitor, since we are given its capacitance and its voltage:
Q CV 1.80 10 4 F 120 V 2.16 10 2 21.6 mC 50.
What voltage must be applied to an 8.00 nF capacitor to store 0.160 mC of charge?
218
College Physics
Soluti on
Student Solutions Manual
Chapter 19
Q CV
Using the equation , we can determine the voltage that must be applied to a capacitor, given the charge it stores and its capacitance:
Q 1.60 10 4 C V 2.00 10 4 V 20.0 kV 9 C 8.00 10 F 19.6 CAPACITORS IN SERIES AND PARALLEL 59. What total capacitances can you make by connecting a
an
Soluti on
5.00 μF and
8.00 μF capacitor together?
There are two ways in which you can connect two capacitors: in parallel and in series. When connected in series, the total capacitance is given by the equation
CC 1 1 1 (5.00 μF)(8.00 μF) Cs 1 2 3.08 μF (series) Cs C1 C2 C1 C2 5.00 μF 8.00 μF and when connected in parallel, the total capacitance is given by the equation
C p C1 C 2 5.00 μF 8.00 μF 13.0 μF(paralle l) 19.7 ENERGY STORED IN CAPACITORS
219
College Physics
Student Solutions Manual
66.
Chapter 19
2.00 μF
7.40 μF
Suppose you have a 9.00 V battery, a capacitor, and a capacitor. (a) Find the charge and energy stored if the capacitors are connected to the battery in series. (b) Do the same for a parallel connection.
Soluti on
(a) If the capacitors are connected in series, their total capacitance
CC 1 1 1 (2.00 μF)(7.40 μF) Cs 1 2 1.575 μF . C C C C C 9 . 40 μF 1 2 1 2 is: s Then, since we know the capacitance and the voltage of the
battery, we can use the equation
Q CV
to determine the charge
6 5 Q C V ( 1 . 574 10 F )( 9 . 00 V ) 1 . 42 10 C s stored in the capacitors:
Then determine the energy stored in the capacitors, using the
equation
CsV 2 (1.574 10-6 F)(9.00 V) 2 Ecap 6.38 10 5 J 2 2 . CV 2 E 2
Note: by using the form of this equation involving capacitance and voltage, we can avoid using one of the parameters that we calculated, minimizing our change of propagating an error. (b) If the capacitors are connected in parallel, their total capacitance
is given by the equation
Cp C1 C2 2.00 μF 7.40 μF 9.40 μF 220
College Physics
Student Solutions Manual
Again, we use the equation
stored in the capacitors:
Q CV
Chapter 19
to determine the charge
Q C pV (9.40 10 6 F)(9.00 V) 8.46 10 5 C
And finally, using the following equation again, we can determine the energy stored in the capacitors:
CpV 2 (9.40 10 -6 F)(9.00 V) 2 Ecap 3.8110 4 J 2 2
221
College Physics
Student Solutions Manual
Chapter 20
CHAPTER 20: ELECTRIC CURRENT, RESISTANCE, AND OHM’S LAW 20.1 CURRENT 1.
What is the current in milliamperes produced by the solar cells of a pocket calculator through which 4.00 C of charge passes in 4.00 h?
Soluti on Using the equation
I
Q t , we can calculate the current given in the
charge and the time, remembering that
I
7.
1 A 1 C/s :
Q 4.00 C 1 h 4 2.778 10 A 0.278 mA t 4.00 h 3600 s
(a) A defibrillator sends a 6.00-A current through the chest of a patient by applying a 10,000-V potential as in Figure 20.38. What is the resistance of the path? (b) The defibrillator paddles make contact with the patient through a conducting gel that greatly reduces the path resistance. Discuss the difficulties that would ensue if a larger voltage were used to produce the same current through the patient, but with the path having perhaps 50 times the resistance. (Hint: The current must be about the same, so a higher voltage would imply greater power. Use this equation for power:
P I 2 R .)
222
College Physics
Student Solutions Manual
Soluti on (a) Using the equation
I
Chapter 20
V R , we can calculate the resistance of the I
path given the current and the potential:
V R , so that
V 10,000 V R 1.667 103 Ω 1.67 kΩ I 6.00 A (b) If a 50 times larger resistance existed, keeping the current about the same, the power would be increased by a factor of about 50, causing much more energy to be transferred to the skin, which could cause serious burns. The gel used reduces the resistance, and therefore reduces the power transferred to the skin.
13. A large cyclotron directs a beam of
He + +
nuclei onto a target with a
++ He beam current of 0.250 mA. (a) How many
nuclei per second is this? (b) How long does it take for 1.00 C to strike the target? (c) How long before 1.00 mol of
He++ nuclei strike the target?
223
College Physics
Soluti on
Student Solutions Manual
Chapter 20
He
(a) Since we know that a ion has a charge of twice the basic unit of charge, we can convert the current, which has units of C/s, He into the number of ions per second:
1 He (2.50 10 C/s) 7.811014 He nuclei/s 19 2(1.60 10 C) 4
I (b) Using the equation
Q t , we can determine the time it takes to
transfer 1.00 C of charge, since we know the current:
t that
I
Q t , so
Q 1.00 C 4.00 10 3 s 4 I 2.50 10 A
(c) Using the result from part (a), we can determine the time it takes
to transfer 1.00 mol of
He
ions by converting units:
6.02 10 23 ions 1s 8 (1.00 mol He ) 7.7110 s 14 mol 7.81 10 He ions
20.2 OHM’S LAW: RESISTANCE AND SIMPLE CIRCUITS 19.
Calculate the efective resistance of a pocket calculator that has a 1.35-V battery and through which 0.200 mA flows.
224
College Physics
Soluti on Using the equation
Student Solutions Manual
I
V R , given the voltage and the current, we can I
determine the resistance:
R
V R , so that
V 1.35 V 6.75 10 3 Ω 6.75 kΩ 4 I 2.00 10 A
20.3 RESISTANCE AND RESISTIVITY 25.
Chapter 20
The diameter of 0-gauge copper wire is 8.252 mm. Find the resistance of a 1.00-km length of such wire used for power transmission.
225
College Physics
Student Solutions Manual
Soluti on We know we want to use the equation
R
Chapter 20
L A , so we need to
A πr 2
determine the radius for the cross-sectional area of . Since we know the diameter of the wire is 8.252 mm, we can determine the
radius of the wire:
d 8.252 10 3 m r 4.126 10 3 m 2 2 .
We also know from Table 20.1 that the resistivity of copper is
1.72 10 8 Ωm . These values give a resistance of: L (1.72 10 8 Ω m)(1.00 10 3 m) R 0.322 Ω A (4.126 10 3 m) 2 31.
Of what material is a resistor made if its resistance is 40.0% greater at
100C than at 20.0C ?
226
College Physics
Soluti on
Student Solutions Manual
Chapter 20
R R (1 T )
0 We can use the equation to determine the temperature coefficient of resistivity of the material. Then, by examining Table 20.2, we can determine the type of material used to
make the resistor. Since change of
R R0 (1 T ) 1.400R0 ,
for a temperature
80.0C , we can determine :
T 1.400 1
0.400 0.400 5.00 10 3 /C T 80.0 C
So, based on the values of in Table 20.2, the resistor is made of iron.
37.
(a) Digital medical thermometers determine temperature by measuring the resistance of a semiconductor device called a
0.0600 / C
thermistor (which has ) when it is at the same temperature as the patient. What is a patient’s temperature if the thermistor’s resistance at that temperature is 82.0% of its value at
37.0C (normal body temperature)? (b) The negative value for
may
not be maintained for very low temperatures. Discuss why and whether this is the case here. (Hint: Resistance can’t become negative.)
Soluti on
(a)
R R0 1 (T 37.0 C) 0.820 R0 , where 0.600 /C. Dividing by
R0 ,1 (T 37.0 C) 0.820 227
, so that
0.180 (T 37.0 C) ,
College Physics
Student Solutions Manual
(T 37.0 C) giving
Finally,
(b) If
Chapter 20
0.180 0.180 3.00 C. 0.0600 /C
T 37.0 C 3.00 C 40.0 C
is negative at low temperatures, then the term
1 (T 37.0 C) can become negative, which implies that the resistance has the opposite sign of the initial resistance , or it has become negative. Since it is not possible to have a negative resistance, the temperature coefficient of resistivity cannot remain negative to low temperatures. In this example the
magnitude is
39.
Soluti on
1 37.0 C T
Unreasonable Results (a) To what temperature must you raise a resistor made of constantan to double its resistance, assuming a constant temperature coefficient of resistivity? (b) To cut it in half? (c) What is unreasonable about these results? (d) Which assumptions are unreasonable, or which premises are inconsistent?
R R (1 T )
0 (a) Using the equation and setting the resistance equal to twice the initial resistance, we can solve for the final temperature:
R R0 (1 T ) 2R0 T (T T0 ) 1. T0 20C 228
College Physics
Student Solutions Manual
Chapter 20
So the final temperature will be:
1 1 T T0 5 105 C T 5 105 C 6 α 2 10 / C
R R (1 T )
0 (b) Again, using the equation , we can solve for the final temperature when the resistance is half the initial
resistance:
R R0 (1 T )
temperature will be:
T T0
R0 1 (T T0 ) 2 2 , so the final
0.5 5 5 2 . 5 10 C or T 2 . 5 10 C. 2 10 6 / C
(c) In part (a), the temperature is above the melting point of any
metal. In part (b) the temperature is far below impossible.
0 K , which is
(d) The assumption that the resistivity for constantan will remain constant over the derived temperature ranges in part (a) and (b) above is wrong. For large temperature changes, non-linear equation may be needed to find
20.4 ELECTRIC POWER AND ENERGY
229
.
may vary, or a
College Physics
45.
Chapter 20
Verify that the units of a volt-ampere are watts, as implied by the equation
Soluti on
Student Solutions Manual
P IV .
Starting with the equation
P IV , we can get an expression for a
watt in terms of current and voltage:
P W ,
IV A.V (C/s)(J/C) J/s W , so that a watt is equal to an ampere volt.
55.
Soluti on
A cauterizer, used to stop bleeding in surgery, puts out 2.00 mA at 15.0 kV. (a) What is its power output? (b) What is the resistance of the path?
P IV
(a) Using the equation , we can determine the rms power given the current and the voltage:
P IV (2.00 10 3 A)(15.0 10 3 V) 30.0 W I
V R , we can solve for the resistance,
(b) Now, using the equation without using the result from part (a):
V V (1.50 10 4 V) I R 7.50 10 6 Ω 7.50 MΩ 3 R I 2.00 10 A
230
College Physics
Student Solutions Manual
Chapter 20
Note, this assume the cauterizer obeys Ohm's law, which will be true for ohmic materials like good conductors.
59.
Integrated Concepts Cold vaporizers pass a current through water, evaporating it with only a small increase in temperature. One such home device is rated at 3.50 A and utilizes 120 V AC with 95.0% efficiency. (a) What is the vaporization rate in grams per minute? (b) How much water must you put into the vaporizer for 8.00 h of overnight operation? (See Figure 20.42.)
Soluti on (a) From the equation
P IV , we can determine the power generated
P IV (3.50 A)(120 V) 420 J/s 0.420 kJ/s
by the vaporizer. and since the vaporizer has an efficiency of 95.0%, the heat that is capable
of vaporizing the water is
Q (0.950) Pt . This heat vaporizes the
water according to the equation
from Table 14.2, so that
m
Q mLv ,
(0.950) Pt mLv
where
Lv 2256 kJ/kg
,
, or
(0.950) Pt (0.950)(0.420 kJ/s )(60.0 s) 0.0106 kg 10.6 g/min Lv 2256 kJ/kg
(b) If the vaporizer is to run for 8.00 hours , we need to calculate the mass of the water by converting units:
231
College Physics
Student Solutions Manual
Chapter 20
In other words, making use of Table 11.1 to get the density of
water, it requires overnight.
65.
m3 L 5.09 kg 3 3 3 5.09 L 10 kg 10 m
of water to run
Integrated Concepts A light-rail commuter train draws 630 A of 650-V DC electricity when accelerating. (a) What is its power consumption rate in kilowatts? (b) How long does it take to reach 4 5 . 30 10 kg , 20.0 m/s starting from rest if its loaded mass is
assuming 95.0% efficiency and constant power? (c) Find its average acceleration. (d) Discuss how the acceleration you found for the light-rail train compares to what might be typical for an automobile.
Soluti on (a) Using the equation
generated:
P IV , we can determine the power
P IV (630 A)(650 V) 4.10 10 5 W 410 kW
(b) Since the efficiency is 95.0%, the effective power is
Peffective (0.950) P 389.0 kW
. Then we can calculate the work done
W ( P )t
eff . Setting that equal to the change in kinetic by the train: energy gives us an expression for the time it takes to reach 20.0
1 1 2 W mv 2 mv0 ( Peff )t 2 2 m/s from rest: , so that 232
College Physics
Student Solutions Manual
Chapter 20
2
(1 / 2)mv 2 (1 / 2)mv0 0.5(5.30 10 4 kg)( 20.0 m/s ) 2 t 27.25 s 27.3 s Peff 3.890 105 W v 20.0 m/s v v0 at , so that a 0.734 m/s 2 t 27.25 s (c) We recall that (d) A typical automobile can go from 0 to 60 mph in 10 seconds, so
that its acceleration is:
v 60 mi/hr 1 hr 1609 m a 2.7 m/s 2 t 10 s 3600 s mi
Thus, a light-rail train accelerates much slower than a car, but it can reach final speeds substantially faster than a car can sustain. So, typically light-rail tracks are very long and straight, to allow them to reach these faster final speeds without decelerating around sharp turns.
20.5 ALTERNATING CURRENT VERSUS DIRECT CURRENT 73.
Certain heavy industrial equipment uses AC power that has a peak voltage of 679 V. What is the rms voltage?
233
College Physics
Soluti on
Student Solutions Manual
Vrms Using the equation
V0 2 , we can determine the rms voltage,
Vrms given the peak voltage:
79.
Soluti on
Chapter 20
V0 2
679 V 2
480 V
What is the peak power consumption of a 120-V AC microwave oven that draws 10.0 A?
P I rmsVrms Using the equation ave , we can calculate the average power given the rms values for the current and voltage: Pave I rms Vrms (10.0 A)(120 V) 1.20 kW Next, since the peak power is the peak current times the peak
1 P0 I 0V0 2( I 0V0 ) 2 Pave 2.40 kW 2 voltage: 83. Find the time after
t 0 when the instantaneous voltage of 60-Hz AC
V / 2 V0 first reaches the following values: (a) 0 (b) (c) 0. Soluti on
V V sin 2ft
0 (a) From the equation , we know how the voltage changes with time for an alternating current (AC). So, if we want
234
College Physics
Student Solutions Manual
the voltage to be equal to
V0 2
Chapter 20
, we know that
V0 2
V sin = 0
2ft
, so
sin 1 (0.5) 1 t . sin 2ft 2 f 2 , or
that: Since we have a frequency of 60 Hz, we can solve for the time that this first occurs (remembering to have your calculator in radians):
t
0.5236 rad 1.39 10 3 s 1.39 ms 2 (60 Hz )
(b) Similarly, for
V V0 : V V0 sin 2ft V0
, so that
sin 1 1 / 2 rad t 4.17 10 3 s 4.17 ms 2f 2 (60 Hz)
(c) Finally, for
V 0 : V V0 sin 2ft 0
the first time after
t 0:
, so that
2ft , or t
2ft 0, , 2 ,....., or for
1 8.33 10 3 s 8.33 ms 2(60 Hz )
20.6 ELECTRIC HAZARDS AND THE HUMAN BODY 89.
Foolishly trying to fish a burning piece of bread from a toaster with a metal butter knife, a man comes into contact with 120-V AC. He does not even feel it since, luckily, he is wearing rubber-soled shoes. What is the minimum resistance of the path the current follows through the person?
235
College Physics
Soluti on
Student Solutions Manual
Chapter 20
From Table 20.3, we know that the threshold of sensation is
I 1.00 mA . The minimum resistance for the shock to not be felt will I
I
occur when is equal to this value. So, using the equation can determine the minimum resistance for 120 V AC current:
R
V 120 V 1.20 10 5 Ω 3 I 1.00 10 A
236
V R
,we
College Physics
Student Solutions Manual
Chapter 21
CHAPTER 21: CIRCUITS, BIOELECTRICITY, AND DC INSTRUMENTS 21.1 RESISTORS IN SERIES AND PARALLEL
1. (a) What is the resistance of ten (b) In parallel?
Soluti on
(a) From the equation
series add:
275- resistors connected in series?
Rs R1 R2 R3 ...
we know that resistors in
Rs R1 R2 R3 ........ R10 275 10 2.75 k
(b) From the equation series add like:
1 1 1 .... Rp R1 R2
, we know that resistors in
1 1 1 1 1 3.64 10 2 ......... 10 Rp R1 R2 R10 275
1 27.5 2 3.64 10
Rp So that
237
College Physics
7.
Student Solutions Manual
Chapter 21
Referring to the example combining series and parallel circuits and
I Figure 21.6, calculate 3 in the following two diferent ways: (a) from R
I
I
the known values of and 2 ; (b) using Ohm’s law for 3 . In both parts explicitly show how you follow the steps in the Problem-Solving Strategies for Series and Parallel Resistors. Step 1: The circuit diagram is drawn in Figure 21.6. Soluti on
I Step 2: Find 3 . Step 3: Resistors
R2 and R3
are in parallel. Then, resistor
series with the combination of
R1
is in
R2 and R3 .
Step 4: (a) Looking at the point where the wire comes into the parallel
combination of
R2
and
R3
, we see that the current coming in
I equal to the current going out 2 and
I3
, so that
I I 2 I 3,
or
I 3 I 2 2.35 A 1.61 A 0.74 A (b) Using Ohm’s law for
R3
, and voltage for the combination of
238
R2
I
is
College Physics
and
I3
Student Solutions Manual
R3 Vp R3
Chapter 21
, found in Example 21.3, we can determine the current:
9.65 V 0.742 A 13.0
Step 5: The result is reasonable because it is smaller than the incoming current,
I , and both methods produce the same answer.
21.2 ELECTROMOTIVE FORCE: TERMINAL VOLTAGE
15.
Soluti on
Carbon-zinc dry cells (sometimes referred to as non-alkaline cells) have an emf of 1.54 V, and they are produced as single cells or in various combinations to form other voltages. (a) How many 1.54-V cells are needed to make the common 9-V battery used in many small electronic devices? (b) What is the actual emf of the approximately 9-V battery? (c) Discuss how internal resistance in the series connection of cells will afect the terminal voltage of this approximately 9-V battery. (a) To determine the number simply divide the 9-V by the emf of each cell:
9 V 1.54 V 5.84 6 (b) If six dry cells are put in series , the actual emf is
1.54 V 6 9.24 V
(c) Internal resistance will decrease the terminal voltage because there will be voltage drops across the internal resistance that will not be useful in the operation of the 9-V battery.
239
College Physics
30.
Student Solutions Manual
Chapter 21
Unreasonable Results (a) What is the internal resistance of a 1.54-
15.0-
V dry cell that supplies 1.00 W of power to a bulb? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?
Soluti on
P I 2 R, we have I (a) Using the equation using Ohm’s Law and
V E Ir
P 1.00 W 0.258 A R 15.0 Ω . So
we have
E 1.54 V V E Ir IR , or : r R 15.0 Ω 9.04 Ω I 0.258 A (b) You cannot have negative resistance. (c) The voltage should be less than the emf of the battery; otherwise the internal resistance comes out negative. Therefore, the power delivered is too large for the given resistance, leading to a current that is too large.
21.3 KIRCHHOFF’S RULES
31.
Apply the loop rule to loop abcdefgha in Figure 21.25. Using the loop rule for loop abcdefgha in Figure 21.25 gives:
Soluti on
I 2 R3 E1 I 2r1 I 3r3 I 3r2 - E2 0 240
College Physics
37.
Student Solutions Manual
Chapter 21
Apply the loop rule to loop akledcba in Figure 21.52. Using the loop rule to loop akledcba in Figure 21.52 gives:
Soluti on
E2 - I 2 r2 - I 2 R2 I1R5 I1r1 - E1 I1R1 0
21.4 DC VOLTMETERS AND AMMETERS
44. Find the resistance that must be placed in series with a
25.0-
50.0-μA
galvanometer having a sensitivity (the same as the one discussed in the text) to allow it to be used as a voltmeter with a 0.100-V full-scale reading.
Soluti on
We are given
r 25.0 , V 0.200 V, and I 50.0 A .
Since the resistors are in series, the total resistance for the voltmeter
is found by using the resistance
Rs R1 R2 R3 ... . So, using Ohm’s law we can find
R:
V V 0.100 V Rtot R r , so that R r 25.0 Ω 1975 Ω 1.98 kΩ I I 5.00 10 -5 A
241
College Physics
50.
Student Solutions Manual
Chapter 21
Suppose you measure the terminal voltage of a 1.585-V alkaline cell
0.100
1.00 - k
having an internal resistance of by placing a voltmeter across its terminals. (Figure 21.54.) (a) What current flows? (b) Find the terminal voltage. (c) To see how close the measured terminal voltage is to the emf, calculate their ratio.
V
Soluti on
I r E
(a)
Going counterclockwise around the loop using the loop rule gives:
E Ir IR 0, or I
E 1.585 V 1.5848 103 A 1.58 103 A 3 R r 1.00 10 0.100
(b) The terminal voltage is given by the equation
V E Ir :
V E Ir 1.585 V 1.5848 10 3 A 0.100 1.5848 V Note: The answer is reported to 5 significant figures to see the difference. (c) To calculate the ratio, divide the terminal voltage by the emf:
V 1.5848 V 0.99990 E 1.585 V
242
College Physics
Student Solutions Manual
243
Chapter 21
College Physics
Student Solutions Manual
Chapter 21
21.5 NULL MEASUREMENTS
58. Calculate the when
emf x of a dry cell for which a potentiometer is balanced
Rx 1.200 , while an alkaline standard cell with an emf of
1.600 V requires
Soluti on
We know
Rs 1.247
to balance the potentiometer.
E x IRx and Es IRs ,
so that
R E x I x Rx 1.200 , or E x Es x 1.600 V 1.540 V Es I s Rs R 1 . 247 s 21.6 DC CIRCUITS CONTAINING RESISTORS AND CAPACITORS
63.
The timing device in an automobile’s intermittent wiper system is based on an
RC
time constant and utilizes a
R
0.500 - μF capacitor and
a variable resistor. Over what range must be made to vary to achieve time constants from 2.00 to 15.0 s?
244
College Physics
Soluti on
Student Solutions Manual
From the equation
R
τ RC ,
Chapter 21
we know that:
τ 2.00 s τ 15.0 s 6 4 . 00 10 and R 3.00 10 7 -7 -7 C 5.00 10 F C 5.00 10 F
Therefore, the range for R
is:
4.00 106 3.00 107 4.00 to 30.0 M
69.
RC
A heart defibrillator being used on a patient has an time constant of 10.0 ms due to the resistance of the patient and the capacitance
8.00 - μF
of the defibrillator. (a) If the defibrillator has an capacitance, what is the resistance of the path through the patient? (You may neglect the capacitance of the patient and the resistance of the defibrillator.) (b) If the initial voltage is 12.0 kV, how long does it take to decline to
Soluti on
6.00102 V ?
(a) Using the equation
RC we can calculate the resistance:
τ 1.00 10 2 s R 1.25 10 3 1.25 k -6 C 8.00 10 F
245
College Physics
Student Solutions Manual
(b) Using the equation
V V0 e
-
RC
for the voltage to drop from
,
Chapter 21
we can calculate the time it takes
12.0 kV to 600 V :
V τ -RC ln V0
600 V -2 2.996 10 s 30.0 ms 4 1.20 10 V
1.25 10 3 8.00 10 -6 F ln
74.
Integrated Concepts If you wish to take a picture of a bullet traveling at 500 m/s, then a very brief flash of light produced by an
RC
discharge through a flash tube can limit blurring. Assuming 1.00
mm of motion during one the flash is driven by a flash tube?
RC
constant is acceptable, and given that
600-μF capacitor, what is the resistance in the
246
College Physics
Soluti on
Using
Student Solutions Manual
c
x x or t t v
Chapter 21
and the equation for the time constant, we can
RC
write the time constant as , so getting these two times equal gives an expression from which we can solve for the required
x x 1.00 10 3 m RC , or R 3.33 10 3 Ω 4 vC (500 m/s)(6.00 10 F) resistance: v
247
College Physics
Student Solutions Manual
Chapter 22
CHAPTER 22: MAGNETISM 22.4 MAGNETIC FIELD STRENGTH: FORCE ON A MOVING CHARGE IN A MAGNETIC FIELD
1.
What is the direction of the magnetic force on a positive charge that moves as shown in each of the six cases shown in Figure 22.50?
248
College Physics
Soluti on
Student Solutions Manual
Chapter 22
Use the right hand rule-1 to solve this problem. Your right thumb is in the direction of velocity, your fingers point in the direction of magnetic field, and then your palm points in the direction of magnetic force.
(a) Your right thumb should be facing down, your fingers out of the page, and then the palm of your hand points to the left (West).
(b) Your right thumb should point up, your fingers should point to the right, and then the palm of your hand points into the page.
(c) Your right thumb should point to the right, your fingers should point into the page, and then the palm of your hand points up (North).
(d) The velocity and the magnetic field are anti-parallel, so there is no force.
(e) Your right thumb should point into the page, your fingers should point up, and then the palm of your hand points to the right (East).
(f) Your right thumb should point out of the page, your fingers should point to the left, and then the palm of your hand points down (South).
249
College Physics
Student Solutions Manual
7.
Chapter 22
0.100 - μC
What is the maximum force on an aluminum rod with a charge that you pass between the poles of a 1.50-T permanent magnet at a speed of 5.00 m/s? In what direction is the force?
Soluti on Examining
the equation
occurs when
F qvB sin , we see that the maximum force
sin 1 , so that:
Fmax qvB (0.100 10 6 C) (5.00 m/s) (1.50 T) 7.50 10 7 N
22.5 FORCE ON A MOVING CHARGE IN A MAGNETIC FIELD: EXAMPLES AND APPLICATIONS
13.
7 7 . 50 10 m/s A proton moves at
perpendicular to a magnetic field. The field causes the proton to travel in a circular path of radius 0.800 m. What is the field strength?
250
College Physics
Student Solutions Manual
Solutio n
r
Chapter 22
mv , qB
Using the equation we can solve for the magnetic field strength necessary to move the proton in a circle of radius 0.800 m:
mv (1.67 10 27 kg) (7.50 10 7 m/s) B 0.979 T qr (1.60 10 19 C) (0.800 m)
19.
(a) At what speed will a proton move in a circular path of the same radius as the electron in Exercise 22.12? (b) What would the radius of the path be if the proton had the same speed as the electron? (c) What would the radius be if the proton had the same kinetic energy as the electron? (d) The same momentum?
Solutio n
r
mv , qB
(a) Since we know and we want the radius of the proton to equal the radius of the electron in Exercise 22.12, we can write the velocity of the proton in terms of the information we know about the electron:
vp
q p Br mp
q p B m e v e me v e mp q e B mp
(9.11 10 31 kg) (7.50 10 6 m/s) 4.09 10 3 m/s 27 1.67 10 kg
251
College Physics
Student Solutions Manual
r
Chapter 22
mv , qB
(b) Now, using we can solve for the radius of the proton if the velocity equals the velocity of the electron:
mve (1.67 10 27 kg) (7.50 10 6 m/s) rp 7.83 10 3 m 19 5 qB (1.60 10 C) (1.00 10 T)
(c) First, we need to determine the speed of the proton if the kinetic
energies were the same:
v p ve
1 1 2 2 me v e m p v p 2 2
, so that
me 9.11 10 31 kg 6 (7.50 10 m/s) 1.75 10 5 m/s 27 mp 1.67 10 kg
r Then using
mv , qB
we can determine the radius:
mv (1.67 10 27 kg) (1.752 10 5 m/s) r 1.83 10 2 m 19 5 qB (1.60 10 C) (1.00 10 T)
252
College Physics
Student Solutions Manual
Chapter 22
(d) First, we need to determine the speed of the proton if the momentums are the same:
me v e m p v p
, so that
me 9.11 10 31 kg 6 (7.50 10 m/s) 4.09 10 3 m/s v p ve 27 m 1.67 10 kg p
r Then using
mv , qB
we can determine the radius:
mv 1.67 10 27 kg 4.091 10 3 m/s r 4.27 m qB 1.60 10 -19 C 1.00 10 5 T
22.6 THE HALL EFFECT
25.
A nonmechanical water meter could utilize the Hall efect by applying a magnetic field across a metal pipe and measuring the Hall voltage produced. What is the average fluid velocity in a 3.00cm-diameter pipe, if a 0.500-T field across it creates a 60.0-mV Hall voltage?
253
College Physics
Soluti on
Student Solutions Manual
Chapter 22
E Blv ,
Using the equation we can determine the average velocity of the fluid. Note that the width is actually the diameter in this case:
E 60.0 10 3 V v 4.00 m/s Bl (0.500 T)(0.0300 m)
29.
Soluti on
Show that the Hall voltage across wires made of the same material, carrying identical currents, and subjected to the same magnetic field is inversely proportional to their diameters. (Hint: Consider how drift velocity depends on wire diameter.)
Using the equation
E Blv , where the width is twice the radius, I 2r
, and using the equation drift velocity:
vd
I I nqA nqπq2
E B 2r
I nqAv d
, we can get an expression for the
, so substituting into
I 2 IB 1 1 . n q π q2 nq πqr r d 254
E Blv , gives:
College Physics
Student Solutions Manual
Chapter 22
So, the Hall voltage is inversely proportional to the diameter of the wire.
22.7 MAGNETIC FORCE ON A CURRENT-CARRYING CONDUCTOR
36.
Soluti on
What force is exerted on the water in an MHD drive utilizing a 25.0cm-diameter tube, if 100-A current is passed across the tube that is perpendicular to a 2.00-T magnetic field? (The relatively small size of this force indicates the need for very large currents and magnetic fields to make practical MHD drives.)
Using
F IlBsin θ , where l is the diameter of the tube, we can find
the force on the water:
F IlBsin θ (100 A) (0.250 m) (2.00 T) (1) 50.0 N
22.8 TORQUE ON A CURRENT LOOP: MOTORS AND METERS
42.
(a) What is the maximum torque on a 150-turn square loop of wire 18.0 cm on a side that carries a 50.0-A current in a 1.60-T field? (b) What is the torque when
is 10.9 ?
255
College Physics
Solutio n
Student Solutions Manual
(a) Using the equation max torque occurs when
NIAB sin
Chapter 22
we see that the maximum
sin 1 , so the maximum torque is:
max NIAB sin (150) (50.0 A) (0.180 m) 2 (1.60 T) (1) 389 N m
(b) Now, use max
NIAB sin
, and set
20.0 , so that the torque is:
NIAB sin (150) (50.0 A) (0.180 m) 2 (1.60 T) sin 10.9 73.5 N m
48.
(a) A 200-turn circular loop of radius 50.0 cm is vertical, with its axis on an east-west line. A current of 100 A circulates clockwise in the loop when viewed from the east. The Earth’s field here is due north, 5 3 . 00 10 T . What are the parallel to the ground, with a strength of
direction and magnitude of the torque on the loop? (b) Does this device have any practical applications as a motcor?
256
College Physics
Student Solutions Manual
Chapter 22
Solutio n
,
(a) The torque, is clockwise as seen from directly above since the loop will rotate clockwise as seen from directly above. Using the
equation max
NIAB sin
, we find the maximum torque to be:
τ NIAB (200) (100 A) π (0.500 m) 2 (3.00 10 5 T) 0.471 N m (b) If the loop was connected to a wire, this is an example of a simple motor (see Figure 22.30). When current is passed through the loops, the magnetic field exerts a torque on the loops, which rotates a shaft. Electrical energy is converted to mechanical work in the process.
22.10 MAGNETIC FORCE BETWEEN TWO PARALLEL CONDUCTORS
50.
(a) The hot and neutral wires supplying DC power to a light-rail commuter train carry 800 A and are separated by 75.0 cm. What is the magnitude and direction of the force between 50.0 m of these wires? (b) Discuss the practical consequences of this force, if any.
257
College Physics
Student Solutions Manual
Solutio n (a) Using the equation
wires:
F 0 I1 I 2 l 2 r
Chapter 22
, we can calculate the force on the
l 0 I 2 50.0 4π 10 7 T m/A 800 A 2 F 8.53 N 2 r 2π 0.750 m
The force is repulsive because the currents are in opposite directions.
(b) This force is repulsive and therefore there is never a risk that the two wires will touch and short circuit.
56.
Find the direction and magnitude of the force that each wire experiences in Figure 22.58(a) by using vector addition.
Solutio n
Opposites repel, likes attract, so we need to consider each wire’s relationship with the other two wires. Let f denote force per unit length, then by 258
College Physics
Student Solutions Manual
0 I1 I 2 2 r 4π 10 7 T m/A 5.00 A 10.0 A 1.00 10 4 N/m 2π 0.100 m
f f AB f BC
4π 10
f AC
4π 10
7
7
T m/A 10.0 A 20.0 A 4.00 10 4 N/m 4 f AB 2π 0.100 m
T m/A 5.00 A 20.0 A 2.00 10 4 N/m 2 f AB 2π 0.100 m
Look at each wire separately:
Wire A
fAC
30° 30° fAB
Wire B
fBC 60°
fAB
259
Chapter 22
College Physics
Student Solutions Manual
fBC fAC
60°
Wire C
For wire A:
f Ax f AB sin 30 f AC sin 30
f AB 2 f AB sin 30 f AB cos 30 0.500 10 4 N/m
f Ay f AB cos 30 f AC cos 30 f AB 2 f AB cos 30 3 f AB cos 30 2.60 10 4 N/m FA
f A2x f A2y 2.65 10 4 N/m f Ax
A tan 1
10.9
f Ay
FA
A
fA y
fA x
For Wire B:
260
Chapter 22
College Physics
Student Solutions Manual
f Bx f BC f AB cos 60
4.00 10 4 N/m 1.00 10 4 N/m cos60 3.50 10 4 N/m
f By f AB sin 60 1.00 10 4 N/m sin 60 0.866 10 4 N/m f B2x f B2y 3.61 10 4 N/m
FB
f Bx
B tan 1
13.9
f By
B
fB x fB y
FB
For Wire C:
f Cx f AC cos 60 f BC
f Cy
2.00 10 4 N/m sin 60 4.00 10 4 N/m 3.00 10 4 N/m f AC sin 60 f BC
2.00 10 4 N/m sin 60 4.00 10 4 N/m 1.73 10 4 N/m FC
f C2x f C2y 3.46 10 4 N/m f Cy f Cx
C tan 1
30.0
261
Chapter 22
College Physics
Student Solutions Manual
Chapter 22
fC x C
fC y
FC
22.11 MORE APPLICATIONS OF MAGNETISM
77.
Integrated Concepts (a) Using the values given for an MHD drive in Exercise 22.36, and assuming the force is uniformly applied to the fluid, calculate the pressure created in fraction of an atmosphere?
Solutio n (a) Using
P
P
N/m 2 . (b) Is this a significant
F A , we can calculate the pressure:
F F 50.0 N 2 1.02 10 3 N/m 2 2 A r π 0.125 m
(b) No, this is not a significant fraction of an atmosphere.
P 1.02 10 3 N/m 2 1.01% Patm 1.013 10 5 N/m 2 262
College Physics
83.
Student Solutions Manual
Chapter 22
Integrated Concepts (a) What is the direction of the force on a wire carrying a current due east in a location where the Earth’s field is due north? Both are parallel to the ground. (b) Calculate the force per meter if the wire carries 20.0 A and the field strength is
3.00 10 5 T . (c) What diameter copper wire would have its weight supported by this force? (d) Calculate the resistance per meter and the voltage per meter needed.
Solutio n
N B I
E
(a) Use the right hand rule-1. Put your right thumb to the east and your fingers to the north, then your palm points in the direction of the force, or up from the ground (out of the page).
(b) Using
F IlB sin , where 90 , so that F IlB sin , or
F IB sin 20.0 A 3.00 10 5 T (1) 6.00 10 4 N/m l
263
College Physics
Student Solutions Manual
Chapter 22
F mg
(c)
We want the force of the magnetic field to balance the weight force, so
F mg .
Now, to calculate the mass, recall
m V , where the volume is
2 2 V r 2 L , so m V r L and F r Lg , or
F L r g
6.00 10 4 N/m 4.71 10 5 m 3 3 2 8.80 10 kg/m π 9.80 m/s
d 2r 9.41 10 5 m
264
College Physics
Student Solutions Manual
R (d) From
L L , A r 2 where
Chapter 22
is the resistivity:
R 1.72 10 8 Ω.m 2.47 Ω/m. L r 2 π 4.71 10 5 m 2
I Also, using the equation
V R , we find that
V R I 20.0 A 2.47 Ω/m 49.4 V/m L L
89.
Unreasonable Results A surveyor 100 m from a long straight 200kV DC power line suspects that its magnetic field may equal that of the Earth and afect compass readings. (a) Calculate the current in 5 5 . 00 10 T the wire needed to create a
field at this distance. (b) What is unreasonable about this result? (c) Which assumption or premise is responsible?
265
College Physics
Student Solutions Manual
Solutio n
B
Chapter 22
0 I , 2 r we can calculate the current required
(a) Using the equation to get the desired magnetic field strength:
2 r B 2π 100 m 5.00 10 5 T I 2.50 10 4 A 25.0 kA 0
4π 10 7 T.m/A
(b) This current is unreasonably high. It implies a total power delivery in the line of
P IV 25.0 10 3 A 200 10 3 V 50.0 10 9 W 50.0 GW,
which is
much too high for standard transmission lines.
(c) 100 meters is a long distance to obtain the required field strength. Also coaxial cables are used for transmission lines so that there is virtually no field for DC power lines, because of cancellation from opposing currents. The surveyor’s concerns are not a problem for his magnetic field measurements.
266
College Physics
Student Solutions Manual
Chapter 23
CHAPTER 23: ELECTROMAGNETIC INDUCTION, AC CIRCUITS, AND ELECTRICAL TECHNOLOGIES 23.1 INDUCED EMF AND MAGNETIC FLUX
1.
Soluti on
What is the value of the magnetic flux at coil 2 in Figure 23.56 due to coil 1?
Using the equation
Φ BA cos , we can calculate the flux through coil
2, since the coils are perpendicular:
Φ BA cos BA cos 90 0
23.2 FARADAY’S LAW OF INDUCTION: LENZ’S LAW
7. Verify that the units of
Φ / t
are volts. That is, show that
1 T m2 / s 1 V .
267
College Physics
Student Solutions Manual
Solutio n The units of
ΔΦ Δt
will be:
ΔΦ T m 2 N A m Δt s 14.
Chapter 23
m2 N m N m V so that 1 T m 2 /s 1 V s A s C
A lightning bolt produces a rapidly varying magnetic field. If the bolt strikes the earth vertically and acts like a current in a long straight wire, it will induce a voltage in a loop aligned like that in Figure 23.57(b). What voltage is induced in a 1.00 m diameter loop 50.0 m from a
2.00 106 A
lightning strike, if the current falls to zero in
25.0 μs ? (b) Discuss circumstances under which such a voltage would produce noticeable consequences.
Solutio n
E0
NΦ , t
(a) We know where the minus sign means that the emf creates the current and magnetic field that opposes the change in
2 Φ BA πr B flux, and
. Since the only thing that varies in the magnetic flux is the magnetic field, we can then say that
Φ r B . Now, since 2
B
0 I 2d
268
the change in magnetic field
College Physics
Student Solutions Manual
Chapter 23
B occurs because of a change in the current, or
substituting these into the equation
E0
0 I 2d . Finally,
NΦ t gives:
Nr 2 0 I Nr 2 I 0 2dt 2dt 2 4 10 7 T m/A 1 0.500 m 2.00 10 6 A 251 V 2 50.0 m 2.50 10 5 s
E0
(b) An example is the alternator in your car. If you were driving during a lightning storm and this large bolt of lightning hit at 50.0 m away, it is possible to fry the alternator of your battery because of this large voltage surge. In addition, the hair at the back of your neck would stand on end because it becomes statically charged.
23.3 MOTIONAL EMF
16.
If a current flows in the Satellite Tether shown in Figure 23.12, use Faraday’s law, Lenz’s law, and RHR-1 to show that there is a magnetic force on the tether in the direction opposite to its velocity.
Soluti on
The flux through the loop (into the page) is increasing because the loop is getting larger and enclosing more magnetic field.
269
College Physics
Student Solutions Manual
Chapter 23
return path I v tether ship
Thus, a magnetic field (out of the page) is induced to oppose the change in flux from the original field. Using RHR-2, point your fingers out of the page within the loop, then your thumb points in the counterclockwise direction around the loop, so the induced magnetic field is produced by the induction of a counterclockwise current in the circuit. Finally, using RHR-1, putting your right thumb in the direction of the current and your fingers into the page (in the direction of the magnetic field), your palm points to the left, so the magnetic force on the wire is to the left (in the direction opposite to its velocity).
23.4 EDDY CURRENTS AND MAGNETIC DAMPING
27.
A coil is moved through a magnetic field as shown in Figure 23.59. The field is uniform inside the rectangle and zero outside. What is the direction of the induced current and what is the direction of the magnetic force on the coil at each position shown?
270
College Physics
Soluti on
Student Solutions Manual
Chapter 23
(a) The magnetic field is zero and not changing, so there is no current and therefore no force on the coil.
(b) The magnetic field is increasing out of the page, so the induced magnetic field is into the page, created by an induced clockwise current. This current creates a force to the left.
(c) The magnetic field is not changing, so there is no current and therefore no force on the coil.
(d) The magnetic field is decreasing out of the page, so the induced magnetic field is out of the page, created by an induced counterclockwise current. This current creates a force to the right.
(e) The magnetic field is zero and not changing, so there is no current and therefore no force on the coil.
23.5 ELECTRIC GENERATORS
31.
What is the peak emf generated by a 0.250 m radius, 500-turn coil is rotated one-fourth of a revolution in 4.17 ms, originally having its plane perpendicular to a uniform magnetic field. (This is 60 rev/s.)
Soluti on
Using the information given in Exercise 23.12:
271
College Physics
Student Solutions Manual
Chapter 23
1 1 rev 2 rad and t 4.17 10 3 s, 4 4 2 N 500; A r 2 0.250 m ; and B 0.425 T,
we get:
1 / 4 2 rad 376.7 rad/s. t 4.17 10 -3 s Therefore,
E 0 NAB 500 0.250 m 0.425 T 376.7 rad/s 1.57 10 4 V 15.7 kV 2
23.6 BACK EMF
39.
Suppose a motor connected to a 120 V source draws 10.0 A when it first starts. (a) What is its resistance? (b) What current does it draw at its normal operating speed when it develops a 100 V back emf?
272
College Physics
Student Solutions Manual
Soluti on
I (a) Using the equation
R and the current:
I
Chapter 23
V R , we can determine given the voltage
V 120 V 6.00 I 20.0 A
V R , we can now determine the current given that
(b) Again, using the net voltage is the difference between the source voltage and the back emf:
V 120 V 100 V I 3.33 A R 6.00
43.
The motor in a toy car is powered by four batteries in series, which produce a total emf of 6.00 V. The motor draws 3.00 A and develops
0.100
a 4.50 V back emf at normal speed. Each battery has a internal resistance. What is the resistance of the motor?
273
College Physics
Soluti on
Student Solutions Manual
Chapter 23
Since the resistors are in series, we know the total internal resistance of the batteries is
I
R 4 0.100 . Therefore,
E V E V 6.00 V 4.50 V , so that R R R 4 0.100 Ω 0.100 Ω R R I 3.00 A
23.7 TRANSFORMERS
46.
A cassette recorder uses a plug-in transformer to convert 120 V to 12.0 V, with a maximum current output of 200 mA. (a) What is the current input? (b) What is the power input? (c) Is this amount of power reasonable for a small appliance?
274
College Physics
Student Solutions Manual
Solutio n (a) Using the equations
Ip primary current:
Is
Vs I p Vp I s
Vs N s Vp N p
and
N p Vp , N s Vs
so that
Chapter 23
, we can determine the
Vp 12.0 V 2 I p I s 0.200 A 2.00 10 A 20.0 mA 120 V Vs
(b)
Pin I pVp 0.200 A 120 V 2.40 W
(c) Yes, this amount of power is quite reasonable for a small appliance.
23.9 INDUCTANCE
55.
Two coils are placed close together in a physics lab to demonstrate Faraday’s law of induction. A current of 5.00 A in one is switched of in 1.00 ms, inducing a 9.00 V emf in the other. What is their mutual inductance?
275
College Physics
Student Solutions Manual
Soluti on
E2 M
Chapter 23
I1 , t
Using the equation where the minus sign is an expression of Lenz’s law, we can calculate the mutual inductance between the two coils:
t 1.00 10 3 s M E2 9.00 V 1.80 mH I 1 5.00 A
61.
A large research solenoid has a self-inductance of 25.0 H. (a) What induced emf opposes shutting it of when 100 A of current through it is switched of in 80.0 ms? (b) How much energy is stored in the inductor at full current? (c) At what rate in watts must energy be dissipated to switch the current of in 80.0 ms? (d) In view of the answer to the last part, is it surprising that shutting it down this quickly is difficult?
Soluti on
EL (a) Using the equation
EL
I t , we have
100 A 3.125 10 4 V 31.3 kV I 25.0 H t 8.00 102 s
276
College Physics
(b) Using
Student Solutions Manual
1 Eind LI 2 2
(c) Using the equation
Chapter 23
1 2 5 25.0 H 100 A 1.25 10 J 2
P
E t , we have
E 1.25 10 5 J P 1.563 10 6 W 1.56 MW -2 t 8.00 10 s (d) No, it is not surprising since this power is very high.
68.
Unreasonable Results A 25.0 H inductor has 100 A of current turned of in 1.00 ms. (a) What voltage is induced to oppose this? (b) What is unreasonable about this result? (c) Which assumption or premise is responsible?
277
College Physics
Soluti on
Student Solutions Manual
E L (a)
Chapter 23
100 A 2.50 10 6 V I 25.0 H t 1.00 10 3 s
(b) The voltage is so extremely high that arcing would occur and the current would not be reduced so rapidly.
(c) It is not reasonable to shut off such a large current in such a large inductor in such an extremely short time.
23.10 RL CIRCUITS
69.
If you want a characteristic RL time constant of 1.00 s, and you have a
Soluti on
75.
500
resistor, what value of self-inductance is needed?
L , R Using the equation
we know
L R 1.00 s 500 Ω 500 H
I What percentage of the final current 0 flows through an inductor in series with a resistor completed?
R , three time constants after the circuit is
278
L
College Physics
Student Solutions Manual
Soluti on
Chapter 23
t I I 0 1 e
We use the equation , because the problem says, “after the circuit is completed.” Thus, the final current is given by: t I I 0 1 e
I I0
, where
t 3
so that:
t 1 e 1 e 3 0.9502
The current is 95.0% of the final current after 3 time constants.
23.11 REACTANCE, INDUCTIVE AND CAPACITIVE
81. What capacitance should be used to produce a 60.0 Hz?
279
2.00 M reactance at
College Physics
Solutio n
Student Solutions Manual
XC Using the equation capacitance:
C
87.
Chapter 23
1 , 2fC we can determine the necessary
1 1 1.326 10 9 F 1.33 nF 6 2fX C 2π 60.0 Hz 2.00 10 Ω
(a) An inductor designed to filter high-frequency noise from power supplied to a personal computer is placed in series with the computer. What minimum inductance should it have to produce a
2.00 k
reactance for 15.0 kHz noise? (b) What is its reactance at 60.0 Hz?
280
College Physics
Solutio n
Student Solutions Manual
Chapter 23
X L 2fL ,
(a) Using the equation
XL 2.00 10 3 Ω X L 2fL, or L 2.122 10 2 H 21.2 mH 4 2f 2π 1.50 10 Hz
X (b) Again using L
2fL ,
X L 2fL 2π 60.0 Hz 2.122 10-2 H 8.00 Ω 23.12 RLC SERIES AC CIRCUITS
95.
What is the resonant frequency of a 0.500 mH inductor connected to a
40.0 F capacitor?
Solutio n
1
f0
2 Using the equation frequency for the circuit: f0
1 2 LC
LC , we can determine the resonant
1
2 5.00 10 H 4.00 10 F -4
-5
281
1.125 10 3 Hz 1.13 kHz
College Physics
Student Solutions Manual
101. An RLC series circuit has a
2.50 resistor, a 100 H
Chapter 23
inductor, and an
80.0 F capacitor. (a) Find the circuit’s impedance at 120 Hz. (b) Find the circuit’s impedance at 5.00 kHz. (c) If the voltage source has
Vrms 5.60 V
I , what is rms at each frequency? (d) What is the resonant
I frequency of the circuit? (e) What is rms at resonance?
Solutio n
(a) The equation
X L 2fL
gives the inductive reactance:
X L 2fL 2π120 Hz 1.00 10 -4 H 7.540 10-2 Ω
XC The equation
XC
1 2fC
gives the capacitive reactance:
1 1 16.58 2 f C 2π 120 Hz 8.00 10 -5 F
282
College Physics
Student Solutions Manual
Finally, the equation the RLC circuit:
Z R2 X L X C
Chapter 23
2
gives the impedance of
Z R 2 X L X C 2.50 Ω 7.54 10 2 Ω 16.58 Ω 16.7 Ω 2
2
X L 2fL gives the inductive reactance:
(b) Again,
X L 2π 5.00 103 Hz 1.00 10 -4 H 3.142 Ω
XC
1 2fC gives the capacitive reactance:
XC
1 3.979 10 -1 -4 2π 5.00 10 Hz 8.00 10 F
And
3
Z R2 X L X C
2
gives the impedance:
283
2
College Physics
Student Solutions Manual
Chapter 23
Z 2.50 Ω 3.142 Ω 3.979 10 1 Ω 3.71 Ω 2
2
(c) The rms current is found using the equation
f 120 Hz ,
284
I rms
Vrms R
. For
College Physics
Student Solutions Manual
I rms
Chapter 23
Vrms 5.60 V 0.336 A Z 16.69 Ω
and for
f 5.00 kHz ,
I rms
5.60 V 1.51 A 3.712 Ω
f0 (d) The resonant frequency is found using the equation
f0
1 2 LC
2 1.00 10 -7 H 8.00 10 -5 F
(e) At resonance,
I rms
1
X L X R , so that Z R
Vrms 5.60 V 2.24 A R 2.50 Ω
285
1 2 LC :
5.63 10 4 Hz 56.3 kHz
and
I rms
Vrms R
reduces to:
College Physics
Student Solutions Manual
Chapter 24
CHAPTER 24: ELECTROMAGNETIC WAVES 24.1 MAXWELL’S EQUATIONS: ELECTROMAGNETIC WAVES PREDICTED AND OBSERVED
1.
c
Verify that the correct value for the speed of light is obtained when numerical values for the permeability and permittivity of free
space ( 0 and 0 ) are entered into the equation
286
c
1 0 0
.
College Physics
Soluti on
Student Solutions Manual
We know that
0 4 107 T m / A,
-12 8.85 10 F/m, 0 that
c
4 10
and from Section 19.1, we know
so that the equation becomes:
1
7
Chapter 24
T m / A (8.8542 10 F/m ) -12
2.998 108 m/s 3.00 108 m/s
The units work as follows:
c 1 A TF T F/A
C/s Jm 2 N s/C m C /J N s 2
N m m N s2
m2 m/s s2
24.3 THE ELECTROMAGNETIC SPECTRUM
8.
A radio station utilizes frequencies between commercial AM and FM. What is the frequency of a 11.12-m-wavelength channel?
287
College Physics
Soluti on
Student Solutions Manual
Chapter 24
c f ,
Using the equation we can solve for the frequency since we know the speed of light and are given the wavelength;
c 2.998 10 8 m/s f 2.696 10 7 s 1 26.96 MHz 11.2 m
17.
If the Sun suddenly turned of, we would not know it until its light stopped coming. How long would that be, given that the Sun is
1.50 1011 m away? Soluti on
d v , t and since we know the speed of light and the
We know that distance from the sun to the earth, we can calculate the time:
d 1.50 1011 m t 500 s c 3.00 108 m/s
23.
(a) What is the frequency of the 193-nm ultraviolet radiation used in laser eye surgery? (b) Assuming the accuracy with which this EM radiation can ablate the cornea is directly proportional to wavelength, how much more accurate can this UV be than the shortest visible wavelength of light?
288
College Physics
Soluti on
Student Solutions Manual
Chapter 24
c f
(a) Using the equation we can calculate the frequency given the speed of light and the wavelength of the radiation:
c 3.00 108 m/s f 1.55 1015 s 1 1.55 1015 Hz -7 1.93 10 m (b) The shortest wavelength of visible light is 380 nm, so that:
visible 380 nm 1.97. UV 193 nm
In other words, the UV radiation is 97% more accurate than the shortest wavelength of visible light, or almost twice as accurate.
24.4 ENERGY IN ELECTROMAGNETIC WAVES
31.
Find the intensity of an electromagnetic wave having a peak 9 4 . 00 10 T. magnetic field strength of
289
College Physics
Student Solutions Manual
Soluti on
Chapter 24
2
I ave Using the equation
cB 0 2μ 0
we see that:
cB0 3.00 108 m/s 4.00 10 9 T I ave 1.91 10 3 W/m 2 7 2 μ0 2 4π 10 T m/A 2
2
The units work as follows:
m/s T 2 T A N/A m A I T m/A
36.
s
s
N J/m W s.m s m m 2
Lasers can be constructed that produce an extremely high intensity electromagnetic wave for a brief time—called pulsed lasers. They are used to ignite nuclear fusion, for example. Such a laser may produce an electromagnetic wave with a maximum electric field
1.00 10 V / m
11 strength of for a time of 1.00 ns. (a) What is the maximum magnetic field strength in the wave? (b) What is the
intensity of the beam? (c) What energy does it deliver on a area?
290
1.00 - mm 2
College Physics
Student Solutions Manual
Soluti on
Chapter 24
E c B , we can determine the maximum
(a) Using the equation magnetic field strength given the maximum electric field strength:
E0 1.00 1011 N/C B0 333 T, c 3.00 108 m/s
recalling that 1 V/m = 1 N/C.
c 0 E 02 I ave 2
(b) Using the equation , we can calculate the intensity without using the result from part (a):
I
c 0 E 02 2
3.00 10
8
m/s 8.85 10 12 C 2 /N m 1.00 1011 N/C 1.33 1019 W/m 2 2 2
(c) We can get an expression for the power in terms of the intensity:
P IA,
E Pt
and from the equation , we can express the energy in terms of the power provided. Since we are told the time of the 2 1.00 mm laser pulse, we can calculate the energy delivered to a
area per pulse:
291
College Physics
40.
Student Solutions Manual
Chapter 24
Integrated Concepts What capacitance is needed in series with an
800 - H inductor to form a circuit that radiates a wavelength of 196 m?
Soluti on
f0 Using the equation
1 2 LC C
of the resonant frequency: using the equation
c f
, we can find the capacitance in terms
1 4 Lf 02 . Substituting for the frequency, 2
gives:
196 m 2 C 2 2 2 1.35 10 11 F 13.5 pF 4 8 4 Lc 4π 8.00 10 H 3.00 10 m/s 2
The units work as follows:
s2 s2 s s As C C F 2 H m/s H Ω s Ω V/A V V m2
44.
Integrated Concepts Electromagnetic radiation from a 5.00-mW laser is concentrated on a
1.00 mm2 area. (a) What is the intensity in
W/m 2 ? (b) Suppose a 2.00-nC static charge is in the beam. What is
the maximum electric force it experiences? (c) If the static charge moves at 400 m/s, what maximum magnetic force can it feel?
292
College Physics
Student Solutions Manual
Soluti on
I (a) From the equation
Chapter 24
P A , we know:
P 5.00 10 3 W I 5.00 10 3 W/m 2 6 2 A 1.00 10 m
(b) Using the equation electric field:
cε E I ave 0 0 2
2
, we can solve for the maximum
2I 2(5.00 10 3 W/m 2 ) E0 1.94 10 3 N/C. 8 12 2 2 cε 0 (3.00 10 m/s)(8 .85 10 C /N m )
E So, using the equation nC charges:
F q
we can calculate the force on a 2.00
F qE0 2.00 109 C1.94 103 N/C 3.88 106 N
(c) Using the equations
F qvB sin and 293
E c B , we can write the
College Physics
Student Solutions Manual
Chapter 24
maximum magnetic force in terms of the electric field, since the electric and magnetic fields are related for electromagnetic radiation:
FB,max
qvE0 2.00 10 9 C 400 m/s 1.94 10 3 N/C qvB0 5.18 10 12 N 8 c 3.00 10 m/s
So the electric force is approximately 6 orders of magnitude stronger than the magnetic force.
50.
LC
Unreasonable Results An circuit containing a 1.00-pF capacitor oscillates at such a frequency that it radiates at a 300-nm wavelength. (a) What is the inductance of the circuit? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?
294
College Physics
Student Solutions Manual
Soluti on
f0 (a) Using the equations inductance:
1 2 LC
and
c f , we can solve for the
c 1 f , 2 LC so that
2 3.00 10 7 m L 2 2 2.53 10 20 H 2 4 Cc 4π 2 1.00 10 12 F3.00 108 m/s 2
(b) This inductance is unreasonably small.
(c) The wavelength is too small.
295
Chapter 24
College Physics
Student Solutions Manual
Chapter 25
CHAPTER 25: GEOMETRIC OPTICS 25.1 THE RAY ASPECT OF LIGHT
1.
Suppose a man stands in front of a mirror as shown in Figure 25.50. His eyes are 1.65 m above the floor, and the top of his head is 0.13 m higher. Find the height above the floor of the top and bottom of the smallest mirror in which he can see both the top of his head and his feet. How is this distance related to the man’s height?
296
College Physics
Soluti on
Student Solutions Manual
Chapter 25
a
0.13 m
L 1.65 m b
From ray-tracing and the law of reflection, we know that the angle of incidence is equal to the angle of reflection, so the top of the mirror must extend to at least halfway between his eyes and the top of his head. The bottom must go down to halfway between his eyes and the floor. This result is independent of how far he stands from the
a wall. Therefore,
0.13 m 1.65 m 0.065 m b 0.825 m 2 2 ,
L 1.65 m 0.13 m a b 1.78 m
The bottom is
b 0.825 m
and
0.13 m 1.65 m 0.89 m 2 2
from the floor and the top is
b L 0.825 m 0.89 m 1.715 m from the floor. 25.3 THE LAW OF REFRACTION
7.
Calculate the index of refraction for a medium in which the speed of
2.012 108 m/s , and identify the most likely substance based on
light is Table 25.1.
297
College Physics
Soluti on
Student Solutions Manual
Chapter 25
c 2.997 108 m/s n 1.490 v 2.012 108 m/s . From Table 25.1, the
Use the equation substance is polystyrene.
13.
Suppose you have an unknown clear substance immersed in water, and you wish to identify it by finding its index of refraction. You arrange to have a beam of light enter it at an angle of
45.0 , and you
40.3
observe the angle of refraction to be . What is the index of refraction of the substance and its likely identity?
Soluti on
n sin 1 n2 sin , we can solve for the unknown Using the equation 1 n2 n1 index of refraction:
sin 1 (1.33)(sin 45. 0) 1.46 sin 2 sin 40.3
From Table 25.1, the most likely solid substance is fused quartz.
25.4 TOTAL INTERNAL REFLECTION
22.
An optical fiber uses flint glass clad with crown glass. What is the critical angle?
298
College Physics
Student Solutions Manual
Soluti on Using the equation
n2 n 1
c sin -1
Chapter 25
and the indices of refraction from
Table 25.1 gives a critical angle of
n2 1.52 sin -1 66.3 n 1 . 66 1
c sin -1
25.5 DISPERSION: THE RAINBOW AND PRISMS
33.
A ray of 610 nm light goes from air into fused quartz at an incident
55.0
angle of . At what incident angle must 470 nm light enter flint glass to have the same angle of refraction?
Soluti on
n sin 1 Using Snell’s law, we have 1
n2sin 2 and n'1 sin '1 n'2 sin '2 . We can
set 2 equal to 2 , because the angles of refraction are equal.
Combining the equations gives
n1 n'1 1.00
n1sin 1 n'1 sin '1 n2 n'2 . We know that
because the light is entering from air. From Table 25.2,
n we find the 610 nm light in fused quartz has 2 nm light in flint glass has
1.456
and the 470
n'2 1.684 . We can solve for the incident 299
College Physics
Student Solutions Manual
Chapter 25
angle 1 : n1 n' 2 11.684 sin 1 sin 1 sin55.0 71.3 1.4561 n2 n'1
'1 sin 1
25.6 IMAGE FORMATION BY LENSES
39.
You note that your prescription for new eyeglasses is –4.50 D. What will their focal length be?
Soluti on Using the equation
1 P , f
eyeglasses, recalling that
f
43.
we can solve for the focal length of your
1 D 1/m :
1 1 0.222 m 22.2 cm . P 4.50 D
How far from a piece of paper must you hold your father’s 2.25 D reading glasses to try to burn a hole in the paper with sunlight?
300
College Physics
Student Solutions Manual
Soluti on
P Using the equation
Chapter 25
1 f , we can solve for the focal length for your
1 1 0.444 m 44.4 cm . P 2.25 D
f
father’s reading glasses: In order to burn a hole in the paper, you want to have the glasses exactly one focal length from the paper, so the glasses should be 44.4 cm from the paper.
49.
In Example 25.7, the magnification of a book held 7.50 cm from a 10.0 cm focal length lens was found to be 3.00. (a) Find the magnification for the book when it is held 8.50 cm from the magnifier. (b) Do the same for when it is held 9.50 cm from the magnifier. (c) Comment on the trend in m as the object distance increases as in these two calculations.
Soluti on (a) Using the equation
1 1 1 , do di f
1 1 d i f do
1
we can first determine the image
1 1 10.0 cm 8.50 cm
1
56.67cm.
distance: can determine the magnification using the equation
m
d i 56.67 cm 6.67. d o 8.50 cm
301
Then we
College Physics
Student Solutions Manual
(b) Using this equation again gives:
m And a magnification of
1 1 di 10.0 cm 9.50 cm
Chapter 25
1
190 cm
d i 190 cm 20.0 d o 9.5 cm
m
(c) The magnification, , increases rapidly as you increase the object distance toward the focal length.
25.7 IMAGE FORMATION BY MIRRORS
57.
What is the focal length of a makeup mirror that produces a magnification of 1.50 when a person’s face is 12.0 cm away? Explicitly show how you follow the steps in the Problem-Solving Strategy for Mirrors.
302
College Physics
Soluti on
Student Solutions Manual
Chapter 25
Step 1: Image formation by a mirror is involved.
Step 2: Draw the problem set up when possible.
Step 3: Use the thin lens equations to solve this problem.
Step 4: Find
f. m 1.50, d o 0.120 m .
Step 5: Given:
Step 6: No ray tracing is needed.
m Step 7: Using the equation
di , do
di mdo (1.50)(0.120 m) 0.180 m . 1 1 1 , do di f 1 1 f di do
we know that
Then, using the equation
we can determine the focal length: 1
1 1 0.180 m 0.120 m
1
0.360 m
Step 8: Since the focal length303 is greater than the object distance, we
College Physics
Student Solutions Manual
304
Chapter 25
College Physics
Student Solutions Manual
Chapter 26
CHAPTER 26: VISION AND OPTICAL INSTRUMENTS 26.1 PHYSICS OF THE EYE
2.
Calculate the power of the eye when viewing an object 3.00 m away.
Soluti on
Using the lens-to-retina distance of 2.00 cm and the equation
P
1 1 do di
we can determine the power at an object distance of 3.00
m:
P
1 1 1 1 50.3 D d o d i 3.00 m 0.0200 m
26.2 VISION CORRECTION
10.
What was the previous far point of a patient who had laser vision correction that reduced the power of her eye by 7.00 D, producing normal distant vision for her?
305
College Physics
Soluti on
Student Solutions Manual
Chapter 26
Since normal distant vision has a power of 50.0 D (Example 26.2) and the laser vision correction reduced the power of her eye by 7.00 D, she originally had a power of 57.0 D. We can determine her original far point using
1 1 1 P d o P do di di
1
1 57.0 D 0.0200 m
1
0.143 m
Originally, without corrective lenses, she could only see images 14.3 cm (or closer) to her eye.
14.
A young woman with normal distant vision has a 10.0% ability to accommodate (that is, increase) the power of her eyes. What is the closest object she can see clearly?
Soluti on
From Example 26.2, the normal power for distant vision is 50.0 D. For this woman, since she has a 10.0% ability to accommodate, her maximum power is
P
Pmax (1.10)(50.0 D) 55.0 D
. Thus using the
1 1 d o di
equation , we can determine the nearest object she can see clearly since we know the image distance must be the lens-toretina distance of 2.00cm:
1 1 1 P d o P do di di
1
1 55.0 D 0.0200 m
306
1
0.200 m 20.0 cm
College Physics
Student Solutions Manual
Chapter 26
26.5 TELESCOPES
37.
7.5
7.50
A binocular produces an angular magnification of , acting like a telescope. (Mirrors are used to make the image upright.) If the binoculars have objective lenses with a 75.0 cm focal length, what is the focal length of the eyepiece lenses?
Soluti on
M
fo fe
Using the equation , we can determine the focal length of the eyepiece since we know the magnification and the focal length of the objective:
fe
fo 75.0 cm 10.0 cm M 7.50
26.6 ABERRATIONS
39.
Integrated Concepts (a) During laser vision correction, a brief burst of 193 nm ultraviolet light is projected onto the cornea of the patient. It makes a spot 1.00 mm in diameter and deposits 0.500 mJ of energy. Calculate the depth of the layer ablated, assuming the corneal tissue has the same properties as water and is initially at
34.0C . The tissue’s temperature is increased to 100C and evaporated without further temperature increase. (b) Does your answer imply that the shape of the cornea can be finely controlled?
307
College Physics
Soluti on
Student Solutions Manual
Chapter 26
(a) We can get an expression for the heat transfer in terms of the mass of tissue ablated:
Q mcT mLv m(cT Lv )
heat capacity is given in Table 14.1,
c 4186 J/kg C , and the latent
heat of vaporization is given in Table 14.2, Solving for the mass gives:
m
, where the
Lv 2256 103 J/kg .
Q cT Lv
(5.00 10 4 J) 1.975 10 10 kg 6 (4186 J/kg C)(100 C 34.0 C) 2.256 10 J/kg
Now, since the corneal tissue has the same properties as water, 3 1000 kg/m its density is
. Since we know the diameter of the spot,
we can determine the thickness of the layer ablated: so that:
m m V r 2t ,
m 1.975 10 10 kg t 2 2.515 10 7 m 0.251 m 4 2 3 r (5.00 10 m) (1000 kg/m ) (b) Yes, this thickness that the shape of the cornea can be very finely 308
College Physics
Student Solutions Manual
Chapter 26
controlled, producing normal distant vision in more than 90% of patients.
309
College Physics
Student Solutions Manual
Chapter 27
CHAPTER 27: WAVE OPTICS 27.1 THE WAVE ASPECT OF LIGHT: INTERFERENCE
1.
Soluti on
Show that when light passes from air to water, its wavelength decreases to 0.750 times its original value.
n
n , we can calculate the wavelength of light
Using the equation in water. The index of refraction for water is given in Table 25.1, so
n 0.750 n 1.333 . The wavelength of light in water is 0.750
that times the wavelength in air.
27.3 YOUNG’S DOUBLE SLIT EXPERIMENT
7.
Calculate the angle for the third-order maximum of 580-nm wavelength yellow light falling on double slits separated by 0.100 mm.
310
College Physics
Soluti on
Student Solutions Manual
Using the equation angle for
Chapter 27
d sin m for m 0,1,2,3,...... we can calculate the
m 3 , given the wavelength and
the slit separation:
7 m -1 3 5.80 10 m sin sin 0.997 -4 d 1.00 10 m -1
13.
What is the highest-order maximum for 400-nm light falling on double slits separated by
Soluti on
Using the equation
occurs when
25.0 μm ?
d sin m , we notice that the highest order
sin 1 , so the highest order is:
d 2.50 10 5 m m 62.5 4.00 10 -7 m
Since m must be an integer, the highest order is then m = 62.
19.
Using the result of the problem above, calculate the distance between fringes for 633-nm light falling on double slits separated by 0.0800 mm, located 3.00 m from a screen as in Figure 27.56.
311
College Physics
Soluti on
Student Solutions Manual
Chapter 27
From Exercise 25.18, we have an expression for the distance between the fringes , so that:
x 3.00 m 6.33 10 7 m y 2.37 102 m 2.37 cm -5 d 8.00 10 m 27.4 MULTIPLE SLIT DIFFRACTION
25.
Calculate the wavelength of light that has its second-order maximum
45.0
at when falling on a difraction grating that has 5000 lines per centimeter.
312
College Physics
Soluti on
Student Solutions Manual
Chapter 27
The second order maximum is constructive interference, so for diffraction gratings we use the equation
d sin m for m 0,1,2,3,...
m2
where the second order maximum has . Next, we need to determine the slit separation by using the fact that there are 5000
d lines per centimeter:
So, since
1 1m 2.00 10 6 m 5000 slits/cm 100 cm
45.0 , we can determine the wavelength of the light:
d sin 2.00 10 6 m sin 45.0 7.07 10 3 m 707 nm m 2
34.
Show that a difraction grating cannot produce a second-order maximum for a given wavelength of light unless the first-order maximum is at an angle less than
Soluti on
30.0 .
The largest possible second order occurs when
d sin m ,
sin 2 1 . Using the
m equation we see that the value for the slit separation and wavelength are the same for the first and second order maximums, so that:
313
College Physics
Student Solutions Manual
d sin 1
and
Chapter 27
d sin 2 2 , so that: sin 1 1 sin 2 2
Now, since we know the maximum value for the maximum value for
1,max
37.
1 sin 2
sin 2 so that
:
1
, we can solve for
1 1 sin sin 2 2
1
1
30.0
(a) Show that a 30,000-line-per-centimeter grating will not produce a maximum for visible light. (b) What is the longest wavelength for which it does produce a first-order maximum? (c) What is the greatest number of lines per centimeter a difraction grating can have and produce a complete second-order spectrum for visible light?
314
College Physics
Soluti on
Student Solutions Manual
Chapter 27
(a) First we need to calculate the slit separation:
d
1 line 1 line 1m 3.333 10 7 m 333.3 nm. N 30,000 lines/cm 100 cm
Next, using the equation wavelength will be for
, we see that the longest
d sin m
, so in that case,
sin 1 and m 1 , which is not visible. d 333.3 nm
(b) From part (a), we know that the longest wavelength is equal to the slit separation, or 333 nm.
(c) To get the largest number of lines per cm and still produce a complete spectrum, we want the smallest slit separation that allows the longest wavelength of visible light to produce a second order maximum, so (see Example 27.3). For there to
max 760 nm be a second order spectrum,
so
m 2 and sin 1,
d 2 max 2 760 nm 1.52 10 6 m
Now, using the technique in step (a), only in reverse: N
1 line 1 line 1m 6.58 10 3 lines/cm -6 d 1.52 10 m 100 cm 315
College Physics
41.
Student Solutions Manual
Chapter 27
Unreasonable Results (a) What visible wavelength has its fourthorder maximum at an angle of when projected on a 25,000-
25.0 line-per-centimeter difraction grating? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?
Soluti on
(a) For diffraction gratings, we use the equation where the fourth order maximum has d sin m , for m 0,1,2,3,4,... . We first need to determine the slit separation by using the
m4 fact that there are 25,000 lines per centimeter: d
1 1m 4.00 10 7 m 25,000 lines /cm 100 cm
So, since
, we can determine the wavelength of the light:
25.0
d sin 4.00 10 7 m sin 25.0 4.226 10 8 m 42.3 nm m 4
(b) This wavelength is not in the visible spectrum.
(c) The number of slits in this diffraction grating is too large. Etching in integrated circuits can be done to a resolution of 50 nm, so slit separations of 400 nm are at the limit of what we can do today. This line spacing is too small to produce diffraction of light.
27.5 SINGLE SLIT DIFFRACTION 316
College Physics
48.
Student Solutions Manual
Calculate the wavelength of light that produces its first minimum at an angle of when falling on a single slit of width .
36.9
Soluti on
Chapter 27
Using the equation
1.00 μm
, where
is the slit width, we can
D D sin m determine the wavelength for the first minimum,
D sin 1.00 10 6 m sin 36.9 6.004 10 7 m 600 nm m 1
54.
A double slit produces a difraction pattern that is a combination of single and double slit interference. Find the ratio of the width of the slits to the separation between them, if the first minimum of the single slit pattern falls on the fifth maximum of the double slit pattern. (This will greatly reduce the intensity of the fifth maximum.)
317
College Physics
Soluti on
Student Solutions Manual
Chapter 27
The problem is asking us to find the ratio of
to D
slit, using the equation using the equation have
, we have
. For the single
d . For the double slit
D sin n n 1 (because we have a maximum), we
d sin m . Dividing the single slit equation by double slit equation,
m5 where the angle and wavelength are the same gives: D n 1 D 0.200 d m 5 d
So, the slit separation is five times the slit width.
55.
Integrated Concepts A water break at the entrance to a harbor consists of a rock barrier with a 50.0-m-wide opening. Ocean waves of 20.0-m wavelength approach the opening straight on. At what angle to the incident direction are the boats inside the harbor most protected against wave action?
318
College Physics
Soluti on
Student Solutions Manual
Chapter 27
We are looking for the first minimum for single slit diffraction because the 50.0 m wide opening acts as a single slit. Using the equation , where , we can determine the angle for
D sin m first minimum:
m 1
m 1 1 20.0 m 23.58 23.6 sin D 50.0 m
sin 1
Since the main peak for single slit diffraction is the main problem, a boat in the harbor at an angle greater than this first diffraction minimum will feel smaller waves. At the second minimum, the boat will not be affected by the waves at all:
m 1 2 20.0 m 53.13 53.1 sin D 50.0 m
sin 1
27.6 LIMITS OF RESOLUTION: THE RAYLEIGH CRITERION
62.
The limit to the eye’s acuity is actually related to difraction by the pupil. (a) What is the angle between two just-resolvable points of light for a 3.00-mm-diameter pupil, assuming an average wavelength of 550 nm? (b) Take your result to be the practical limit for the eye. What is the greatest possible distance a car can be from you if you can resolve its two headlights, given they are 1.30 m apart? (c) What is the distance between two just-resolvable points held at an arm’s length (0.800 m) from your eye? (d) How does your answer to (c) compare to details you normally observe in everyday circumstances? 319
College Physics
Soluti on
Student Solutions Manual
Chapter 27
(a) Using Rayleigh’s Criterion, we can determine the angle (in radians) that is just resolvable :
1.22
550 10 9 m 2.237 10 4 rad 2.24 10 4 rad 1.22 -3 D 3 . 00 10 m
(b) The distance
between two objects, a distance
s separated by an angle
r
is
r
away,
, so
s r
s 1.30 m 5.811 10 3 m 5.81 km -4 2.237 10 rad
(c) Using the same equation as in part (b):
s r 0.800 m 2.237 10 4 rad 1.789 10 4 m 0.179 mm
(d) Holding a ruler at arm’s length, you can easily see the millimeter divisions; so you can resolve details 1.0 mm apart. Therefore, you probably can resolve details 0.2 mm apart at arm’s length.
27.7 THIN FILM INTERFERENCE
73.
Find the minimum thickness of a soap bubble that appears red when illuminated by white light perpendicular to its surface. Take the wavelength to be 680 nm, and assume the same index of refraction as water.
320
College Physics
Soluti on
Student Solutions Manual
Chapter 27
The minimum thickness will occur when there is one phase change, so for light incident perpendicularly, constructive interference first occurs when . So, using the index of refraction for water 2t
n 2 2n
from Table 25.1:
t
79.
6.80 10 7 m 1.278 10 7 m 128 nm 41.33 4n
Figure 27.34 shows two glass slides illuminated by pure-wavelength light incident perpendicularly. The top slide touches the bottom slide at one end and rests on a 0.100-mm-diameter hair at the other end, forming a wedge of air. (a) How far apart are the dark bands, if the slides are 7.50 cm long and 589-nm light is used? (b) Is there any diference if the slides are made from crown or flint glass? Explain.
Soluti on
(a)
Two adjacent dark bands will have thickness differing by one wavelength, i.e., or
d 2 d1 , and tan
1.00 10 4 m 0.076394. 0 . 075 m
tan -1
321
hair diameter slide length
College Physics
Student Solutions Manual
Chapter 27
.
1.00 10 4 m 0.076394. 0.075 m
tan -1
So, since
, we see that x tan d 2 d1
x
5.89 10 7 m 4.418 10 4 m 0.442 mm tan tan 0.076394
(b) The material makeup of the slides is irrelevant because it is the path difference in the air between the slides that gives rise to interference.
322
College Physics
Student Solutions Manual
Chapter 27
27.8 POLARIZATION
86.
If you have completely polarized light of intensity
, what
150 W / m 2 will its intensity be after passing through a polarizing filter with its axis at an angle to the light’s polarization direction?
89.0
Soluti on
Using the equation
, we can calculate the intensity: I I 0 cos 2
I I 0 cos 2 150 W m 2 cos 2 89.0 4.57 10 2 W m 2 45.7 m W m 2
92.
What is Brewster’s angle for light traveling in water that is reflected from crown glass?
323
College Physics
Soluti on
Student Solutions Manual
Using the equation
, where
is for crown glass and
n2 n2 n1 for water (see Table 25.1), Brewster’s angle is tan b
n2 n1
b tan 1
At
Chapter 27
is n1
1.52 48.75 48.8 1.333
tan 1
(Brewster’s angle) the reflected light is completely polarized.
48.8
324
College Physics
Student Solutions Manual
Chapter 28
CHAPTER 28: SPECIAL RELATIVITY 28.2 SIMULTANEITY AND TIME DILATION
1.
(a) What is
if
? (b) If
Soluti on
v 0.250c
?
v 0.500c
(a) Using the definition of
, where
1 / 2
v2 1 2 c
:
v 0.250c
(0.250c) 2 1 c2
1 / 2
1.0328
(b) Again using the definition of
, now where
(0.500c) 2 1 c2
Note that
:
v 0.500c
1 / 2
1.1547 1.15
is unitless, and the results are reported to three digits
to show the difference from 1 in each case.
325
College Physics
Student Solutions Manual
Chapter 28
6.
A neutron lives 900 s when at rest relative to an observer. How fast is the neutron moving relative to an observer who measures its life span to be 2065 s?
Soluti on
Using
, where t t 0
, we see that:
v2 1 2 c
t 2065 s v2 2.2944 1 2 t 0 900 s c
1 / 2
1 / 2
.
Squaring the equation gives
c2 v2 2 c
1
2
Cross-multiplying gives
c2 2 c v2
, and solving for speed finally c2 v2
c2 2
gives:
c2 1 v c 2 c 1 2 2
1/ 2
1 c 1 2 ( 2.2944)
1/ 2
0.90003c 0.900c
Unreasonable Results (a) Find the value of
for the following
11. 326
College Physics
Student Solutions Manual
Chapter 28
situation. An Earth-bound observer measures 23.9 h to have passed while signals from a high-velocity space probe indicate that have passed on board. (b) What is unreasonable about
24.0 h this result? (c) inconsistent?
Soluti on
Which
assumptions
(a) Using the equation
we can solve for t t 0 ,
(b)
are
unreasonable
:
t 23.9 h 0.9958 0.996 t 0 24.0 h
cannot be less than 1.
(c) The earthbound observer must measure a longer time in the observer's rest frame than the ship bound observer. The assumption that time is longer in the moving ship is unreasonable.
28.3 LENGTH CONTRACTION
14.
(a) How far does the muon in Example 28.1 travel according to the Earth-bound observer? (b) How far does it travel as viewed by an observer moving with it? Base your calculation on its velocity relative to the Earth and the time it lives (proper time). (c) Verify that these two distances are related through length contraction . γ = 3.20
327
or
College Physics
Soluti on
Student Solutions Manual
Chapter 28
Using the values given in Example 28.1:
(a)
L0 vt (0.950c)( 4.87 10 6 s) (0.950c )( 2.998 10 8 m/s )( 4.87 10 6 s) 1.386 10 3 m 1.39 km
(b) L0 vt (0.950c )( 2.998 10 8 m/s )(1.52 10 6 s) 4.329 10 2 m 0.433 km
(c) L
L0 1.386 10 3 m 4.33 10 2 m 0.433 km γ 3.20
28.4 RELATIVISTIC ADDITION OF VELOCITIES
22.
If a spaceship is approaching the Earth at
and a message
0.100c relative to the Earth, what is the
capsule is sent toward it at
0.100c speed of the capsule relative to the ship?
328
College Physics
Soluti on
Student Solutions Manual
Using the equation
Chapter 28
, we can add the relativistic u
v u 1 (vu / c 2 )
velocities: u
28.
v u 0.100c 0.100c 0.198c 2 1 (vu / c ) 1 (0.100c)( 0.100c ) / c 2
When a missile is shot from one spaceship towards another, it leaves the first at and approaches the other at . What is the
0.950c relative velocity of the two ships?
Soluti on
We are given:
and
u 0.750c with the equation u
denominator: uv
v
0.750c
. We want to find
, starting
v u 0.950c . First multiply both sides by the
v u 1 (vu / c 2 ) , then solving for
gives:
v
uu v u c2
u u 0.950c 0.750c 0.696c 2 (uu / c ) 1 (0.750c)(0.950c ) / c 2 1
The velocity
is the speed measured by the second spaceship, so
v the minus sign indicates the ships are moving apart from each other
329
College Physics
(
Student Solutions Manual
is in the opposite direction as
v
34.
Chapter 28
).
u
(a) All but the closest galaxies are receding from our own Milky Way Galaxy. If a galaxy away is receding from us at , at
0.900c 12.0 109 ly what velocity relative to us must we send an exploratory probe to approach the other galaxy at , as measured from that galaxy? (b) 0.990c How long will it take the probe to reach the other galaxy as measured from the Earth? You may assume that the velocity of the other galaxy remains constant. (c) How long will it then take for a radio signal to be beamed back? (All of this is possible in principle, but not practical.)
Soluti on
Note that all answers to this problem are reported to 5 significant figures, to distinguish the results.
(a) We are given
and
. Starting with the equation
v 0.900c u 0.990c , we now want to solve for
. First multiply both
u
v u 1 (vu / c 2 ) sides by the denominator: u
; then solving for the u u
uv v u c2
probe’s speed gives:
u
uv 0.990c (0.900c ) 0.99947c 2 1 (uv / c ) 1 [( 0.990c )( 0.900c ) / c 2 ]
330
College Physics
Student Solutions Manual
Chapter 28
(b) When the probe reaches the other galaxy, it will have traveled a distance (as seen on Earth) of because the galaxy is d x0 vt moving away from us. As seen from Earth,
, so
u 0.9995c t
d x0 vt . u u
Now,
and u t x0 vt
t
x0 12.0 109 ly (1 y) c 1.2064 1011 y u v 0.99947c 0.900c 1 ly
(c) The radio signal travels at the speed of light, so the return time
t is given by
assuming the signal is transmitted as
d x 0 vt , c c soon as the probe reaches the other galaxy. Using the numbers, we can determine the time: t
t
1.20 1010 ly (0.900c)(1 .2064 1011 y) 1.2058 1011 y c
28.5 RELATIVISTIC MOMENTUM
39.
What is the velocity of an electron that has a momentum of ? Note that you must calculate the velocity to at least 3.04 10 21 kg m/s four digits to see the diference from
.
c 331
College Physics
Soluti on
Student Solutions Manual
Chapter 28
Beginning with the equation
we can solve for
p mu
mu
1 u
c2 2 . First cross-multiply and square both sides, giving
the speed
2
1
u u 2 m2 2 1 2 2 u c p
Then, solving for
gives u2
u2
m
1
2
/ p 2 1 / c 2
p2 m2 p2 / c2
Finally, taking the square root gives
.
u
p
m p2 / c2 2
Taking the values for the mass of the electron and the speed of light to five significant figures gives:
u
3.04 10 21 kg m/s
9.1094 10 31 kg 2 3.34 10 21 kg m/s / 2.9979 10 8 kg 2 2
2.988 108 m/s
28.6 RELATIVISTIC ENERGY
332
1/2
College Physics
48.
Student Solutions Manual
Chapter 28
(a) Using data from Table 7.1, calculate the mass converted to energy by the fission of 1.00 kg of uranium. (b) What is the ratio of mass destroyed to the original mass, ?
m / m
Soluti on
(a) From Table 7.1, the energy released from the nuclear fission of 1.00 kg of uranium is . So, , we get E 8.0 1013 J
m
E 0 E released mc 2
E 8.0 1013 J 8.89 10 4 kg 0.89 g c 2 3.00 10 8 m/s 2
(b) To calculate the ratio, simply divide by the original mass:
m 8.89 10 4 kg 8.89 10 4 8.9 10 4 2 m 1.00 kg
52.
A
-meson is a particle that decays into a muon and a massless
particle. The
-meson has a rest mass energy of 139.6 MeV, and the
muon has a rest mass energy of 105.7 MeV. Suppose the
-meson is
at rest and all of the missing mass goes into the muon’s kinetic energy. How fast will the muon move?
333
College Physics
Soluti on
Student Solutions Manual
Using the equation
Chapter 28
, we can determine the kinetic energy
KE rel mc 2 of the muon by determining the missing mass: KE rel mc 2 (m m )c 2 ( 1)m c 2
Solving for
will give us a way of calculating the speed of the muon.
From the equation above, we see that:
m m m
1
m m m m
Now, use
m 139.6 MeV 1.32072. m 105.7 MeV
or
1 v2 c2
v c 1
1
2
so
v2 1 1 2 2 , c
1 1 c 1 0.6532c 2 (1.32072) 2
58.
Find the kinetic energy in MeV of a neutron with a measured life span of 2065 s, given its rest energy is 939.6 MeV, and rest life span is 900s.
Soluti on
From Exercise 28.6, we know that
= 2.2944, so we can determine
the kinetic energy of the neutron: KE rel ( 1)mc 2 2.2944 1 939.6 MeV 1216 MeV. 334
College Physics
Student Solutions Manual
Chapter 28
KE rel ( 1)mc 2 2.2944 1 939.6 MeV 1216 MeV.
64.
(a) Calculate the energy released by the destruction of 1.00 kg of mass. (b) How many kilograms could be lifted to a 10.0 km height by this amount of energy?
Soluti on
(a) Using the equation
, we can calculate the rest mass
E mc 2 energy of a 1.00 kg mass. This rest mass energy is the energy released by the destruction of that amount of mass: E released mc 2 1.00 kg 2.998 10 8 m/s 8.988 1016 J 8.99 1016 J
(b) Using the equation
, we can determine how much mass PE mgh
can be raised to a height of 10.0 km:
m
PE 8.99 1016 J 9.17 1011 kg gh 9.80 m/s 2 10.0 10 3 m
335
College Physics
Student Solutions Manual
Chapter 29
CHAPTER 29: INTRODUCTION TO QUANTUM PHYSICS 29.1 QUANTIZATION OF ENERGY
1.
A LiBr molecule oscillates with a frequency of
. (a) What is
1.7 1013 Hz the diference in energy in eV between allowed oscillator states? (b) What is the approximate value of for a state having an energy of
n 1.0 eV?
Soluti on
(a)
E hf 6.63 10 34 J s 1.7 1013 s 1 1.127 10 20 J
so that
1.127 10
20
1.601eV 10
J
(b) Using the equation
19
2 2 7.04 10 eV 7.0 10 eV
J
, we can solve for E = nhf
n
:
n
E 1 1.0 eV 1.60 10 19 J/eV 1 13.7 14 hf 2 6.63 10 34 J s 1.7 1013 s 1 2
29.2 THE PHOTOELECTRIC EFFECT 336
College Physics
Student Solutions Manual
Chapter 29
7.
Calculate the binding energy in eV of electrons in aluminum, if the longest-wavelength photon that can eject them is 304 nm.
Soluti on
The longest wavelength corresponds to the shortest frequency, or the smallest energy. Therefore, the smallest energy is when the kinetic energy is zero. From the equation , we can KE hf BE 0 calculate the binding energy (writing the frequency in terms of the wavelength): hc hc 6.63 10 34 J s 3.00 108 m/s BE 3.04 10 7 m BE hf
1.000 eV 4.09 eV 19 1.60 10 J
6.543 10 19 J
13.
Find the wavelength of photons that eject 0.100-eV electrons from potassium, given that the binding energy is 2.24 eV. Are these photons visible?
Soluti on
Using the equations
and
we see that
KE hf BE c f so that we can calculate the wavelength of the hc BE KE photons in terms of energies: hf
337
College Physics
Student Solutions Manual
Chapter 29
hc 6.63 10 34 J s 3.00 108 m/s 1.000 eV 19 BE KE 2.24 eV 0.100 eV 1.60 10 J 5.313 10 7 m 531 nm .
Yes, these photons are visible.
19.
Unreasonable Results (a) What is the binding energy of electrons to a material from which 4.00-eV electrons are ejected by 400-nm EM radiation? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?
Soluti on
(a) We want to use the equation
to determine the
KE hf BE binding energy, so we first need to determine an expression of hf . Using
, we know: E hf
hc 6.626 10 34 J s 2.998 108 m/s 4.00 10 7 m 1 eV 3.100 eV 4.966 10 19 J 19 1.602 10 J
hf
and since
: KE hf BE
BE hf KE 3.100 eV 4.00 eV 0.90 eV
338
College Physics
Student Solutions Manual
Chapter 29
(b) The binding energy is too large for the given photon energy.
(c) The electron's kinetic energy is too large for the given photon energy; it cannot be greater than the photon energy.
29.3 PHOTON ENERGIES AND THE ELECTROMAGNETIC SPECTRUM
21.
(a) Find the energy in joules and eV of photons in radio waves from an FM station that has a 90.0-MHz broadcast frequency. (b) What does this imply about the number of photons per second that the radio station must broadcast?
Soluti on
(a) Using the equation
we can determine the energy of E hf
photons:
E hf 6.63 10 34 J/s 9.00 10 8 s 1 5.97 10 26 J
1 eV 3.73 10 7 eV 19 1.60 10 J
5.97 10 26 J
(b) This implies that a tremendous number of photons must be broadcast per second. In order to have a broadcast power of, say 50.0 kW, it would take
339
College Physics
Student Solutions Manual
Chapter 29
5.00 10 4 J/s 8.38 10 29 photon/sec 26 5.97 10 J/photon
24.
Do the unit conversions necessary to show that
hc 1240 eV nm
stated in the text.
Soluti on
, as
Using the conversion for joules to electron volts and meters to nanometers gives:
hc 6.63 10
34
10 9 nm 1.00 eV J s 3.00 10 m/s 1240 eV nm 19 1 m 1.60 10 J 8
33.
(a) If the power output of a 650-kHz radio station is 50.0 kW, how many photons per second are produced? (b) If the radio waves are broadcast uniformly in all directions, find the number of photons per second per square meter at a distance of 100 km. Assume no reflection from the ground or absorption by the air.
Soluti on
(a) We can first calculate the energy of each photon:
E γ hf 6.63 10 34 Js 6.50 10 5 s 1 4.31 10 28 J
340
College Physics
Student Solutions Manual
Chapter 29
Then using the fact that the broadcasting power is 50.0 kW, we can calculate the number of photons per second:
5.00 10 4 J/s N 1.16 10 32 photon/s 1.16 10 32 photon/s 28 4.31 10 J/photon
(b) To calculate the flux of photons, we assume that the broadcast is uniform in all directions, so the area is the surface area of a sphere giving:
ΦN
N 1.16 10 32 photons/s 9.23 10 20 photons/s m 2 2 2 5 4π r 4π 1.00 10 m
29.4 PHOTON MOMENTUM
40.
(a) What is the wavelength of a photon that has a momentum of ? (b) Find its energy in eV. 5.00 1029 kg m/s
Soluti on
(a) Using the equation
, we can solve for the wavelength of the p
photon:
h
341
College Physics
Student Solutions Manual
λ
Chapter 29
h 6.63 10 34 J.s 1.326 10 5 m 13.3 m 29 p 5.00 10 kg m/s
(b) Using the equation
, we can solve for the energy and then
E c convert the units to electron volts: p
E pc 5.00 10 29 kg m/s 3.00 10 8 m/s
1 eV 9.38 10 -2 eV 19 1.60 10 J
1.50 10 20 J
46.
Take the ratio of relativistic rest energy,
, to relativistic
E γmc 2 , and show that in the limit that mass approaches
momentum, p γmu
zero, you find
. E/ pc
Soluti on
Beginning with the two equations
and, E mc 2
E mc 2 c 2 p mu u
342
gives p mu
College Physics
Student Solutions Manual
Chapter 29
As the mass of the particle approaches zero, its velocity
will
u so that the ratio of energy to momentum approaches
approach
c , which is consistent with the equation
E c2 lim m0 c p c photons.
for p
E c
29.6 THE WAVE NATURE OF MATTER
54.
Experiments are performed with ultracold neutrons having velocities as small as 1.00 m/s. (a) What is the wavelength of such a neutron? (b) What is its kinetic energy in eV?
Soluti on
(a) Using the equations
and
h wavelength of the neutron: p
λ
we can calculate the p mv
h h 6.63 10 34 J s 3.956 10 7 m 396 nm 27 p mv 1.675 10 kg 1.00 m/s
(b) Using the equation
we can calculate the kinetic energy KE
1 2 mv 2
of the neutron:
343
College Physics
Student Solutions Manual
Chapter 29
1 2 1 2 mv 1.675 10 27 kg 1.00 m/s 2 2 1 eV 9 8.375 10 28 J 5.23 10 eV 19 1.602 10 J
KE
29.7 PROBABILITY: THE HEISENBERG UNCERTAINTY PRINCIPLE
66.
A relatively long-lived excited state of an atom has a lifetime of 3.00 ms. What is the minimum uncertainty in its energy?
Soluti on
Using the equation
, we can determine the minimum Et
uncertainty for its energy:
ΔE
h 4
h 6.63 10 34 J s 1 eV 13 1.759 10 32 J 1.10 10 eV 3 19 4π Δt 4π 3.00 10 s 1.60 10 J.
29.8 THE PARTICLE-WAVE DUALITY REVIEWED
72.
Integrated Concepts The 54.0-eV electron in Example 29.7 has a 0.167-nm wavelength. If such electrons are passed through a double slit and have their first maximum at an angle of , what is the slit separation
25.0
?
d 344
College Physics
Soluti on
Student Solutions Manual
Using the equation separation when
Chapter 29
, we can solve for the slit d sin m , m 0,1,2.... for the first order maximum:
m 1 d
78.
1 0.167 nm 0.395 nm m sin sin 25.0
Integrated Concepts (a) What is
for a proton having an energy
of 1.00 TeV, produced by the Fermilab accelerator? (b) Find its momentum. (c) What is the proton’s wavelength?
Soluti on
(a) Using the equation
, we can find E mc 2
for 1.00 TeV proton:
1.00 1012 eV 1.60 10 19 J/eV 1.063 103 1.06 103 E mc 2 1.6726 10 27 kg 3.00 108 m/s 2 2
(b)
p mc
E (1.00 1012 eV)(1.60 10 -19 J/eV) 5.33 10 16 kg m/s 8 c 3.00 10 m/s
(c) Using the equation
, we can calculate the proton's p
h 345
College Physics
Student Solutions Manual
Chapter 29
wavelength:
83.
h 6.63 10 34 kg m/s 1.24 10 18 m p 5.33 10 16 kg m/s
Integrated Concepts One problem with x rays is that they are not sensed. Calculate the temperature increase of a researcher exposed in a few seconds to a nearly fatal accidental dose of x rays under the following conditions. The energy of the x-ray photons is 200 keV, and of them are absorbed per kilogram of tissue, the specific 4.00 1013 heat of which is
. (Note that medical diagnostic x-ray
0.830 kcal/kg C machines cannot produce an intensity this great.)
Soluti on
First, we know the amount of heat absorbed by 1.00 kg of tissue is equal to the number of photons times the energy each one carry, so:
1.60 10 19 J 1.28 J 1 eV
Q NE 4.00 1013 2.00 10 5 eV
Next, using the equation
, we can determine how much 1.00 Q mct
kg tissue is heated: t
Q 1.282 J 3.69 10 4 C mc 1.00 kg 0.830 kcal/kg C 4186 J/kcal 346
College Physics
Student Solutions Manual
Chapter 30
CHAPTER 30: ATOMIC PHYSICS 30.1 DISCOVERY OF THE ATOM 1.
Using the given charge-to-mass ratios for electrons and protons, and knowing the magnitudes of their charges are equal, what is the ratio of the proton’s mass to the electron’s? (Note that since the chargeto-mass ratios are given to only three-digit accuracy, your answer may difer from the accepted ratio in the fourth digit.)
Soluti on
We can calculate the ratio of the masses by taking the ratio of the charge to mass ratios given:
and q 1.76 1011 C/kg me
so that q 9.57 10 7 C/kg , mp
mp
q / me 1.76 1011 C/kg 1839 1.84 10 3 . 7 me q / m p 9.57 10 C/kg
The actual mass ratio is:
so to
mp me
1.6726 10 27 kg 1836 1.84 10 3 , 9.1094 10 31 kg
three digits, the mass ratio is correct.
30.3 BOHR’S THEORY OF THE HYDROGEN ATOM 12.
A hydrogen atom in an excited state can be ionized with less energy than when it is in its ground state. What is
for a hydrogen atom if
n
347
College Physics
Student Solutions Manual
Chapter 30
0.850 eV of energy can ionize it?
Soluti on
Using
, we can determine the value for En
, given the
n
13.6 eV n2
ionization energy:
13.6 eV 13.6 eV n En 0.85 eV (Remember that
1/ 2
4 .0 4
must be an integer.)
n
18.
(a) Which line in the Balmer series is the first one in the UV part of the spectrum? (b) How many Balmer series lines are in the visible part of the spectrum? (c) How many are in the UV?
Soluti on
(a) We know that the UV range is from
to approximately
10 nm Using the equation
380 nm.
, where
1 1 1 R 2 2 n f ni
Balmer series, we can solve for
nf 2
. Finding a common ni
348
for the
College Physics
Student Solutions Manual
denominator gives
Chapter 30
so that
1 ni2 nf2 2 2 , R ni nf
or ni2 nf2 R (ni2 nf2 ),
. The first line will be for the lowest energy photon,
ni nf
R R nf2
and therefore the largest wavelength, so setting
gives
380 nm will be the first.
ni 2
(3.80 10 7 m)(1.097 10 7 m -1 ) 9.94 ni 10 (3.80 10 7 m)(1.097 10 7 m -1 ) 4
(b) Setting
allows us to calculate the smallest value for
760 nm
ni
in the visible range: so
ni 2
(7.60 10 7 m)(1.097 10 7 m -1 ) 2.77 ni 3 (7.60 10 7 m)(1.097 10 7 m -1 ) 4
are ni 3 to 9
visible, or 7 lines are in the visible range. (c) The smallest
in the Balmer series would be for
, which ni
corresponds to a value of: ,
1 n2 1 1 R 4 R 2 2 2 f 3.65 10 -7 m 365 nm 7 1 n n n R 1 . 097 10 m i f f
349
College Physics
Student Solutions Manual
Chapter 30
which is in the ultraviolet. Therefore, there are an infinite number of Balmer lines in the ultraviolet. All lines from
fall in ni 10 to
the ultraviolet part of the spectrum.
23.
Soluti on
1. Verify Equations
and n2 rn aB Z
using
h2 0.529 10 10 m 4 2 me kqe2 the approach stated in the text. That is, equate the Coulomb and centripetal forces and then insert an expression for velocity from the condition for angular momentum quantization. Using
aB
so that
Fcoulomb Fcentripetal
Since
kZqe2 me v 2 , rn2 rn
rn
kZqe2 kZqe2 1 . me v 2 me v 2
we can substitute for the velocity giving: me vrn n
h , 2 so that
rn
kZqe2 4 2 me2 rn2 me n2h2
where
rn
n2 h2 n2 aB , Z 4 2 me kqe2 Z
h2 aB . 4 2 me kqe2
30.4 X RAYS: ATOMIC ORIGINS AND APPLICATIONS 26.
A color television tube also generates some x rays when its electron beam strikes the screen. What is the shortest wavelength of these x 350
College Physics
Student Solutions Manual
Chapter 30
rays, if a 30.0-kV potential is used to accelerate the electrons? (Note that TVs have shielding to prevent these x rays from exposing viewers.)
Soluti on
Using the equations
gives E qV and E
hc
, which allows E qV
hc
us to calculate the wavelength:
hc 6.626 10 34 J s 2.998 108 m/s 11 qV 1.602 10 19 C3.00 10 4 V 4.13 10 m
30.5 APPLICATIONS OF ATOMIC EXCITATIONS AND DEEXCITATIONS 33.
(a) What energy photons can pump chromium atoms in a ruby laser from the ground state to its second and third excited states? (b) What are the wavelengths of these photons? Verify that they are in the visible part of the spectrum.
Soluti on
(a) From Figure 30.64, we see that it would take 2.3 eV photons to pump chromium atoms into the second excited state. Similarly, it would take 3.0 eV photons to pump chromium atoms into the third excited state. (b)
, which is yellow-
2
hc 1.24 10 6 eV m 5.39 10 7 m 5.4 10 2 nm E 2.3 eV
green.
351
College Physics
Student Solutions Manual
Chapter 30
, which is blue-
2
hc 1.24 10 6 eV m 4.13 10 7 m 4.1 10 2 nm E 3.0 eV
violet.
30.8 QUANTUM NUMBERS AND RULES 40.
(a) What is the magnitude of the angular momentum for an
l 1 electron? (b) Calculate the magnitude of the electron’s spin angular momentum. (c) What is the ratio of these angular momenta?
Soluti on
(a) Using the equation
, we can calculate the angular L ( 1)
momentum of an
h 2
electron:
1
L ( 1)
h 1(2) 2
6.626 10 34 J s 1.49 10 34 J s 2
(b) Using the equation
, we can determine the S s ( s 1)
h 2
electron’s spin angular momentum, since s
S s( s 1)
h 1 3 2 2 2
1
2
:
6.626 10 34 J s 9.13 10 35 J s 2 352
College Physics
Student Solutions Manual
S s( s 1)
Chapter 30
6.626 10 34 J s 9.13 10 35 J s 2
h 1 3 2 2 2
(c)
( 1) h L 2 h S s ( s 1) 2
2 1.63 3 4
30.9 THE PAULI EXCLUSION PRINCIPLE 55.
Integrated Concepts Calculate the velocity of a star moving relative to the earth if you observe a wavelength of 91.0 nm for ionized hydrogen capturing an electron directly into the lowest orbital (that is, a
to ni
Soluti on
, or a Lyman series transition). nf 1
We will use the equation
to determine the speed of the E E f E i
star, since we are given the observed wavelength. We first need the source wavelength: ,
E E f E i
12 hc Z 2 Z 2 2 E0 2 E0 0 2 (13.6 eV) 13.6 eV s nf 1 ni
so that
Therefore, using
s
obs s
hc 1.24 10 3 eV nm 91.2 nm. E 13.6 eV
1 v / c , 1 v / c
1 v / c 2obs 2 , 1 v /353 c s
v 2 v 1 obs 1 2 c s c
College Physics
Student Solutions Manual
we have
obs s
1 v / c , 1 v / c
Chapter 30
so that
1 v / c 2obs 2 , 1 v / c s
and
v 2 v 1 obs 1 2 c s c
thus,
v 2obs / s2 1 (91.0 nm/91.2 nm ) 2 1 2 2.195 10 3. 2 2 c obs / s 1 (91.0 nm/91.2 nm ) 1 So,
. Since v (2.195 10 3 )( 2.998 108 m/s ) 6.58 10 5 m/s
is negative,
v
the star is moving toward the earth at a speed of 6.58 10 5 m/s.
59.
Integrated Concepts Find the value of , the orbital angular
l momentum quantum number, for the moon around the earth. The extremely large value obtained implies that it is impossible to tell the diference between adjacent quantized orbits for macroscopic objects.
Soluti on
From the definition of velocity,
, we can get an expression for v
d t
the velocity in terms of the period of rotation of the moon:
. v
354
2R T
College Physics
Student Solutions Manual
Then, from
Chapter 30
for a point object we get the angular momentum:
L I . Substituting for the velocity and setting L I mR 2 mR 2
v mRv R
equal to
gives: L ( 1)
large :
h 2
. Since L mvR
2 mR 2 h ( 1) T 2
is l
, so 2 mR 2 h T 2 .
66.
4 2 mR 2 4 2 (7.35 10 22 kg )(3.84 10 8 m ) 2 2.73 10 68 6 34 Th (2.36 10 s )(6.63 10 J.s)
Integrated Concepts A pulsar is a rapidly spinning remnant of a supernova. It rotates on its axis, sweeping hydrogen along with it so that hydrogen on one side moves toward us as fast as 50.0 km/s, while that on the other side moves away as fast as 50.0 km/s. This means that the EM radiation we receive will be Doppler shifted over a range of
. What range of wavelengths will we observe for 50.0 km/s
the 91.20-nm line in the Lyman series of hydrogen? (Such line broadening is observed and actually provides part of the evidence for rapid rotation.)
Soluti on
We will use the Doppler shift equation to determine the observed wavelengths for the Doppler shifted hydrogen line. First, for the 355
College Physics
Student Solutions Manual
Chapter 30
hydrogen moving away from us, we use
so that: u 50.0 km/s,
obs 91.20 nm
1 5.00 10 4 m/s/2.998 108 m/s 91.22 nm 1 5.00 10 4 m/s/2.998 108 m/s
Then, for the hydrogen moving towards us, we use
so u 50.0 km/s,
that:
obs 91.20 nm
1 5.00 10 4 m/s/2.998 108 m/s 91.18 nm 1 5.00 10 4 m/s/2.998 108 m/s
The range of wavelengths is from 91.18 nm to 91.22 nm .
356
College Physics
Student Solutions Manual
Chapter 31
CHAPTER 31: RADIOACTIVITY AND NUCLEAR PHYSICS 31.2 RADIATION DETECTION AND DETECTORS 1.
The energy of 30.0
is required to ionize a molecule of the gas
eV inside a Geiger tube, thereby producing an ion pair. Suppose a particle of ionizing radiation deposits 0.500 MeV of energy in this Geiger tube. What maximum number of ion pairs can it create?
Soluti on
To calculate the number of pairs created, simply divide the total energy by energy needed per pair: . This is the # pairs
0.500 MeV 1.00 10 6 eV/MeV 1.67 10 4 pairs 30.0 eV/pair
maximum number of ion pairs because it assumes all the energy goes to creating ion pairs and that there are no energy losses.
31.3 SUBSTRUCTURE OF THE NUCLEUS 9.
(a) Calculate the radius of
, one of the most tightly bound stable 58
Ni
nuclei. (b) What is the ratio of the radius of
to that of 58
N i
, one 258
Ha
of the largest nuclei ever made? Note that the radius of the largest nucleus is still much smaller than the size of an atom. 357
College Physics
Soluti on
Student Solutions Manual
(a) Using the equation
Chapter 31
we can approximate the radius of
r r0 A
1
58
3
Ni
: rNi r0 ANi
1
3
1.2 10 15 m 58
1
3
4.6 10 15 m 4.6 fm
(b) Again using this equation this time we can approximate the radius of
: 258
Ha
rHa 1.2 10 15 m 258
Finally, taking the ratio of
to
Ni
1
3
7.6 10 15 m 7.6 fm .
gives:
Ha
rNi 4.645 10 15 m 0.61 to 1 rHa 7.639 10 15 m
15.
What is the ratio of the velocity of a 5.00-MeV
ray to that of an
α
β particle with the same kinetic energy? This should confirm that
s β
travel much faster than
s even when relativity is taken into
α consideration. (See also Exercise 31.11.)
Soluti on
We know that the kinetic energy for a relativistic particle is given by
358
College Physics
Student Solutions Manual
the equation
, and that since KE rel ( 1)mc 2
, we can get
v2 1 2 c
an expression for the speed
v c 1
particle:
1 2
, so that KE 5.00 MeV ( 1)(0.511 MeV )
or ( 1) 9.785
v c 1
1 2
, or
v2 1 1 2 2 c For the
Chapter 31
. Thus, the velocity for the
particle is:
10.785
1 1 (2.998 10 8 m s) 1 2.985 10 8 m s 2 2 (10.785)
For the
particle:
so that 931.5 MeV u 2 KE 5.00 MeV ( 1)( 4.0026 u ) c c2
. Thus, the velocity for the
particle is:
1.00134
. Finally, the ratio of
v (2.998 10 8 m s) 1
1 1.551 10 7 m s 2 (1.00134)
359
College Physics
Student Solutions Manual
Chapter 31
the velocities is given by:
.
v v In other words, when the
2.985 108 m s 19.3 to 1 1.55 10 7 m s
and
energy , the
particles have the same kinetic
particle is approximately 19 times faster than the
particle.
31.4 NUCLEAR DECAY AND CONSERVATION LAWS 22.
Electron capture by
. 106
Solutio n
In
Referring to the electron capture equation,
, we A Z
need to calculate the values of
and
Z know that indium has
. From the periodic table we
N
and the element with
Z 49 Using the equation
we know that
for
N A-Z 106-49 57
for cadmium. Putting this all together gives
N 58 106 49
is cadmium.
Z 48
A N Z indium and
X N e Z A1YN 1 v e
In 57 e 106 48 Cd 58 v e
360
College Physics
106 49
28.
Student Solutions Manual
In 57 e 106 48 Cd 58 v e
decay producing
. The parent nuclide is in the decay series 208
produced by
Pb
, the only naturally occurring isotope of thorium. 232
Solutio n
Th
Since we know that
is the product of an 208
X N ZA42YN 2 42 He 2
decay,
Pb
tells us that A Z
Chapter 31
, and since
A 4 208
from
Z 2 82
the periodic table, we then know that
So for the
N 2 208 82 126. parent nucleus we have
and
. Therefore from
N 128
A 212 , Z 84 the periodic table the parent nucleus is
and the decay is 212
212 84
34.
Po
4 Po128 208 82 Pb 126 2 He 2
A rare decay mode has been observed in which
emits a 222
361
Ra
14
C
College Physics
Student Solutions Manual
Chapter 31
nucleus. (a) The decay equation is
. Identify the nuclide 222
Ra A X +14 C
. (b) Find the energy emitted in the decay. The mass of A
X
is 222
Ra
222.015353 u.
Solutio n
, so we know that:
(a) The decay is 222 88
Ra 134 ZA X N 146 C 8 and
A 222 14 208; Z 88 6 82
so from N A Z 208 82 126,
the periodic table the element is lead and X 208 82 Pb126
(b)
m m
222 88
Ra 134 m
208 82
Pb126 m
14 6
C8
222.015353 u 207.976627 u 14.003241 u 3.5485 10 2 u 931.5 MeV/ c 2 2 c 33.05 MeV E mc 3.5485 10 u u 2
40.
2
(a) Write the complete
decay equation for
. (b) Calculate the 11
C
energy released in the decay. The masses of
and 11
11.011433 and 11.009305 u, respectively.
362
C
are 11
B
College Physics
Solutio n
Student Solutions Manual
(a) Using
Chapter 31
and the periodic table we can get the A Z
X N Z A1YN 1 v e
complete decay equation: 11 6
C 5 115 B 6 ve
(b) To calculate the energy emitted we first need to calculate the change in mass. The change in mass is the mass of the parent minus the mass of the daughter and the positron it created. The mass given for the parent and the daughter, however, are given for the neutral atoms. So the carbon has one additional electron than the boron and we must subtract an additional mass of the electron to get the correct change in mass.
m m 11 C m 11 B 2me
11.011433 u 11.009305 u 2 0.00054858 u 1.031 10 3 u
931.5 MeV/ c 2 2 c 0.9602 MeV E mc 1.03110 u u 3
2
31.5 HALF-LIFE AND ACTIVITY 46.
(a) Calculate the activity
in curies of 1.00 g of R
. (b) Discuss 226
Ra
why your answer is not exactly 1.00 Ci, given that the curie was originally supposed to be exactly the activity of a gram of radium.
Soluti on
(a) First we must determine the number of atoms for radium. We use the molar mass of 226 g/mol to get:
mol 6.022 10 23 atoms 2.6646 10 21 atoms 226 g mol 363
N 1.00 g
College Physics
Student Solutions Manual
Chapter 31
mol 6.022 10 23 atoms 2.6646 10 21 atoms mol 226 g
N 1.00 g
Then using the equation
, where we know the half life
R
0.693 N t1 2
of
is 226
R
Ra
, 1.6 103 y
0.693 2.6646 10 21
1y 3.66 1010 Bq 7 3 . 156 10 s
1.6 10 y 3
Ci 0.988 Ci 16 3.70 10 Bq
(b) The half life of
is more accurately known than it was when 226
Ra
the Ci unit was established.
52.
has one of the longest known radioactive half-lives. In a difficult 50
V
experiment, a researcher found that the activity of 1.00 kg of
is 50
1.75 Bq. What is the half-life in years?
364
V
College Physics
Soluti on
Student Solutions Manual
Using the equation
Chapter 31
, we can write the activity in terms of
R
0.693N t1 2
the half-life, the molar mass,
, and the mass of the sample,
m
M
R
:
0.693 N (0.693) (6.02 10 23 atoms mol ) / M m t1 t1 2
2
From the periodic table,
, so M 50.94 g/mol
t1 2
(0.693)(6.02 10 23 atoms mol )(1000 g ) (50.94 g mol )(1.75 Bq )
1y 1.48 1017 y 7 3.156 10 s
4.681 10 24 s
58.
The
particles emitted in the decay of
(tritium) interact with 3
H
matter to create light in a glow-in-the-dark exit sign. At the time of manufacture, such a sign contains 15.0 Ci of
. (a) What is the 3
H
mass of the tritium? (b) What is its activity 5.00 y after manufacture?
365
College Physics
Soluti on
Student Solutions Manual
Using the equation
Chapter 31
, we can write the activity in terms of
R
0.693N t1 2
the half-life, the atomic mass,
and the mass of the sample
m
M (a)
:
. The atomic mass of tritium (from
R
0.693 N 0.693 m M t1 t1 2
2
Appendix A) is
,
1.6605 10 27 kg 5.0082 10 27 kg atom 1 u
M 3.016050 u
and the half-life is 12.33 y (from Appendix B), so we can determine the original mass of tritium:
or m
(15.0 Ci)(12.33 y)(5.0082 10 27 kg) M m 0.693
Rt1 2 M 0.693
3.70 1010 Bq Ci
3.156 10 7 s y
1.56 10 6 kg 1.56 mg (b)
0.693(5.00 y) 0.693 t 11.3 Ci R R0 e R0 exp t (15.0 Ci) exp t1 12.33 y 2
31.6 BINDING ENERGY 366
College Physics
71.
Student Solutions Manual
Chapter 31
is the heaviest stable nuclide, and its 209
is low compared
BE / A
Bi
with medium-mass nuclides. Calculate
, the binding energy per
BE / A nucleon, for
and compare it with the approximate value 209
Bi
obtained from the graph in Figure 31.27.
Soluti on
Dividing
by BE [ Zm 1 H Nmn ] m A X c 2
gives the binding energy
A
per nucleon:
.
2 BE Zm 1 H Nmn m 209 83 Bi 126 c A A
We know that
(from the periodic table),
Z 83 mass of the
and the
N A Z 126
nuclide is 208.908374 u (from Appendix A) so that: 209
Bi
BE 83(1.007825 u ) 126(1.008665 u ) 208.980374 u 931.5 MeV c 2 2 c A 209 u 7.848 MeV nucleon This binding energy per nucleon is approximately the value given in the graph.
76.
Unreasonable Results A particle physicist discovers a neutral 367
College Physics
Student Solutions Manual
Chapter 31
particle with a mass of 2.02733 u that he assumes is two neutrons bound together. (a) Find the binding energy. (b) What is unreasonable about this result? (c) What assumptions are unreasonable or inconsistent?
Soluti on
(a)
931.5 MeV c 2 2 c BE 2mn m( particle )c 2(1.008665 u ) 2.02733 u u 9.315 MeV 2
(b) The binding energy cannot be negative; the nucleons would not stay together. (c) The particle cannot be made from two neutrons.
31.7 TUNNELING 78.
Integrated Concepts A 2.00-T magnetic field is applied perpendicular to the path of charged particles in a bubble chamber. What is the radius of curvature of the path of a 10 MeV proton in this field? Neglect any slowing along its path.
Soluti on
Using the equation
, we can determine the radius of a moving r
mv qB
charge in a magnetic field. First, we need to determine the velocity of the proton. Since the energy of the proton (10.0 MeV) is substantially less than the rest mass energy of the proton (938 MeV),
368
College Physics
Student Solutions Manual
Chapter 31
we know the velocity is non-relativistic and that
. Therefore, E
12
12
2 10.0 MeV (0.1460)( 2.998 10 7 m s). So, 2 938.27 MeV c mv (1.6726 10 27 kg )( 4.377 10 7 m s) r 0.228 m 22.8 cm qB (1.602 10 19 C)( 2.00 T )
2E v m
1 2 mv 2
369
College Physics
Student Solutions Manual
Chapter 32
CHAPTER 32: MEDICAL APPLICATIONS OF NUCLEAR PHYSICS 32.1 MEDICAL IMAGING AND DIAGNOSTICS
1.
A neutron generator uses an
source, such as radium, to bombard
beryllium, inducing the reaction
. Such neutron
He 9 Be 12 C n sources are called RaBe sources, or PuBe sources if they use plutonium to get the s. Calculate the energy output of the reaction 4
in MeV.c
Soluti on
Using
, we can determine the energy output of the reaction
E mc 2 by calculating the change in mass of the constituents in the reaction, where the masses are found either in Appendix A or Table 31.2:
E mi mf c 2 (4.002603 9.02182 12.000000 1.008665)(931.5 MeV ) 5.701 MeV
6.
The activities of
and 131
I
used in thyroid scans are given in Table 123
I 370
College Physics
Student Solutions Manual
32.1 to be 50 and of
Chapter 32
, respectively. Find and compare the masses
70 μCi in such scans, given their respective half-lives are
and 131
123 I I 8.04 d and 13.2 h. The masses are so small that the radioiodine is usually mixed with stable iodine as a carrier to ensure normal chemistry and distribution in the body.
Soluti on
Beginning with the equation
we can solve
0.693 N 0.693 m M N A t1 2 t1 2 for the mass of the iodine isotopes, where the atomic masses and the half lives are given in the appendices: R
m131
RMt 1 / 2 (5.0 10 5 Ci)( 3.70 1010 Bq/Ci)( 130.91 g/mol)(8.0 40 d ) 86400 s d 0.693N A (0.693) 6.02 10 23
4.0 10
10
g
RMt 1 / 2 (7.0 10 5 Ci)(3.70 1010 Bq/Ci )(122.91 g/mol )(13.2 h ) 3600 s h m123 0.693N A (0.693) 6.02 10 23
3.6 10
11
g
32.2 BIOLOGICAL EFFECTS OF IONIZING RADIATION
10.
How many Gy of exposure is needed to give a cancerous tumor a dose of 40 Sv if it is exposed to activity?
371
College Physics
Soluti on
Student Solutions Manual
Using the equation
Chapter 32
and Table 32.2, we know that
Sv Gy RBE for whole body exposure, so
RBE 20
Gy
Sv 40 Sv 2 Gy RBE 20
32.3 THERAPEUTIC USES OF IONIZING RADIATION
21.
Large amounts of
are produced in copper exposed to 65
Zn accelerator beams. While machining contaminated copper, a physicist ingests . Each decay emits an average 65 50.0 μCi of 65 Zn Zn -ray energy of 0.550 MeV, 40.0% of which is absorbed in the scientist’s 75.0-kg body. What dose in mSv is caused by this in one day?
Soluti on
First, we need to determine the number of decays per day:
decays/day 5.00 10 5 Ci 3.70 1010 Bq/Ci 8.64 10 4 s/d 1.598 1011 /d
Next, we can calculate the energy because each decay emits an average of 0.550 MeV of energy:
372
College Physics
Student Solutions Manual
1.598 1011 decays 0.550 MeV 0.400 d decay
E / day
Chapter 32
1.602 10 13 J MeV
5.633 10 3 J/d
Then, dividing by the mass of tissue gives the dose:
Dose in rad/d
5.633 10 3 J/d 1 rad 7.51 10 3 rad/d 75.0 kg 0.0100 J/kg
Finally, from Table 32.2, we see that the RBE is 1 for
radiation, so:
rem/d rad RBE 7.5110 3 rad/d 1 7.51 10 3 rem/d
mSv 0.1 rem
7.51 10 4 mSv/d
This dose is approximately
, which is larger than
2700 mrem/y background radiation sources, but smaller than doses given for cancer treatments.
32.5 FUSION
30.
The energy produced by the fusion of a 1.00-kg mixture of deuterium and tritium was found in Example Calculating Energy and Power from Fusion. Approximately how many kilograms would be required to supply the annual energy use in the United States? 373
College Physics
Soluti on
Student Solutions Manual
From Table 7.6, we know
and from Example 32.2, we
E 1.05 10 20 J know that a 1.00 kg mixture of deuterium and tritium releases of energy, so:
3.37 1014 J
35.
Chapter 32
1.00 kg 3.12 105 kg 14 3 . 37 10 J
M 1.05 10 20 J
The power output of the Sun is
. (a) If 90% of this is
4 10 26 W supplied by the proton-proton cycle, how many protons are consumed per second? (b) How many neutrinos per second should there be per square meter at the Earth from this process? This huge number is indicative of how rarely a neutrino interacts, since large detectors observe very few per day.
Soluti on
(a) Four protons are needed for each cycle to occur. The energy released by a proton-proton cycle is , so that
26.7 MeV
4 protons 1 MeV 13 26.7 MeV 1.602 10 J
# protons/s 0.90 4 10 26 J/s 3 10 38 protons/s
(b) For each cycle, two neutrinos are created and four protons are destroyed. To determine the number of neutrinos at Earth, we need to determine the number of neutrinos leaving the Sun and divide that by the surface area of a sphere with radius from the Sun to Earth:
374
College Physics
Student Solutions Manual
Chapter 32
2 ve 4 protons 3.37 1038 protons/s # # 6 1014 neutrinos/ m 2 s 2 2 area 4R 4 1.50 1011 m
32.6 FISSION
45.
(a) Calculate the energy released in the neutron-induced fission reaction , given and n 239 Pu 96 Sr 140 Ba 4n m( 96 Sr ) 95.921750 u . (b) Confirm that the total number of nucleons m(140 Ba ) 139.910581 u and total charge are conserved in this reaction.
Soluti on
(a) To calculate the energy released, we use
to calculate
E m c 2 the difference in energy before and after the reaction:
m
Sr m Ba 4m c Pu m Sr m Ba 3m c
E mn m 239
239
Pu m 96
96
140
2
n
140
2
n
239.052157 95.921750 139.910581 31.008665 931.5 MeV 180.6 MeV
(b) Writing the equation in full form gives
so
96 1 n 239 94 Pu 145 38 Sr84 4 0 n1 we can determine the total number of nucleons before and after the reaction and the total charge before and after the reaction: 1 0 1
375
College Physics
Student Solutions Manual
Chapter 32
.
Ai 1 239 240 96 140 4 Af ; Z i 0 94 94 56 38 4(0) Z f
Therefore, both the total number of nucleons and the total charge are conserved.
32.7 NUCLEAR WEAPONS
51.
Find the mass converted into energy by a 12.0-kT bomb.
Solutio Using n
, we can calculate the mass converted into energy for a
E mc 2 12.0 kT bomb: m
57.
E 12.0 kT 4.2 1012 J/kT 5.60 10 4 kg 0.56 g 2 8 c2 3.00 10 m/s
Assume one-fourth of the yield of a typical 320-kT strategic bomb comes from fission reactions averaging 200 MeV and the remainder from fusion reactions averaging 20 MeV. (a) Calculate the number of fissions and the approximate mass of uranium and plutonium fissioned, taking the average atomic mass to be 238. (b) Find the number of fusions and calculate the approximate mass of fusion fuel, assuming an average total atomic mass of the two nuclei in each reaction to be 5. (c) Considering the masses found, does it seem reasonable that some missiles could carry 10 warheads? Discuss, noting that the nuclear fuel is only a part of the mass of a warhead.
376
College Physics
Student Solutions Manual
Chapter 32
Solutio (a) Given that for fission reactions, the energy produced is 200 MeV n per fission, we can convert the of 320 kT yield into the number 14
of fissions:
# of fissions
1 4 320 kT (4.2 1012 J/kT ) 1.110 25 fissions 200 MeV/fissio n 1.60 10 13 J/MeV
Then,
m 1.1 10 25 nuclei
1 mol 3 238 g/mol 4.35 10 g 4.3 kg 23 6.022 10 nuclei
(b) Similarly, given that for fusion reactions, the energy produced is 20 MeV per fusion, we convert the of 320 kT yield into the 34 number of fusions:
# of fusions
3 4 320 kT (4.2 1012 J/kT ) 3.2 10 26 fusions 13 200 MeV/fissio n 1.60 10 J/MeV
Then:
1 mol 3 5 g LiD fuel/mol 2.66 10 g 2.7 kg 23 6.022 10 nuclei
m 3.2 10 26 fusions
377
College Physics
Student Solutions Manual
Chapter 32
(c) The nuclear fuel totals only 6 kg, so it is quite reasonable that some missiles carry 10 overheads. The mass of the fuel would only be 60 kg and therefore the mass of the 10 warheads, weighing about 10 times the nuclear fuel, would be only 1500 lbs. If the fuel for the missiles weighs 5 times the total weight of the warheads, the missile would weigh about 9000 lbs or 4.5 tons. This is not an unreasonable weight for a missile.
378
College Physics
Student Solutions Manual
Chapter 33
CHAPTER 33: PARTICLE PHYSICS 33.2 THE FOUR BASIC FORCES 4.
(a) Find the ratio of the strengths of the weak and electromagnetic forces under ordinary circumstances. (b) What does that ratio become under circumstances in which the forces are unified?
Soluti on
(a) From Table 33.1, we know that the ratio of the weak force to the electromagnetic force is
. In other Weak 10 13 2 10 11 Electromag netic 10
words, the weak force is 11 orders of magnitude weaker than the electromagnetic force. (b) When the forces are unified, the idea is that the four forces are just different manifestations of the same force, so under circumstances in which the forces are unified, the ratio becomes 1 to 1. (See Section 33.6.)
33.3 ACCELERATORS CREATE MATTER FROM ENERGY 7.
Suppose a
created in a bubble chamber lives for W
. 5.00 10 25 s
What distance does it move in this time if it is traveling at 0.900c? Since this distance is too short to make a track, the presence of the must be inferred from its decay products. Note that the time is W
379
College Physics
Student Solutions Manual
longer than the given
Chapter 33
lifetime, which can be due to the statistical W
nature of decay or time dilation.
Soluti on
Using the definition of velocity, we can determine the distance traveled by the
in a bubble chamber: W
d vt 0.900 3.00 10 8 m/s 5.00 10 25 s 1.35 10 16 m 0.135 fm
33.4 PARTICLES, PATTERNS, AND CONSERVATION LAWS 13.
The
is its own antiparticle and decays in the following manner:
0 . What is the energy of each
ray if the
0
is at rest when
0
it decays?
Soluti on
If the
is at rest when it decays, its total energy is just
0
. E mc 2
Since its initial momentum is zero, each
ray will have equal but
opposite momentum i.e. p i 0 p f , so that p y1 p y2 0, or p y1 p y2 .
380
College Physics
Student Solutions Manual
Since a
ray is a photon:
Chapter 33
Therefore, since the momenta E p c.
are equal in magnitude the energies of the
rays are equal:
. E1 E2
Then, by conservation of energy, the initial energy of the
equals
0 twice the energy of one of the
rays:
Finally, from Table m 0 c 2 2 E .
33.2, we can determine the rest mass energy of the
, and the
0 energy of each
ray is:
19.
E
m c 2 135 MeV c 2 c 2 67.5 MeV 2 2
(a) What is the uncertainty in the energy released in the decay of a due to its short lifetime? (b) What fraction of the decay energy is
0 this, noting that the decay mode is
(so that all the
0
mass
0
is destroyed)?
Soluti on
(a) Using
, we can calculate the uncertainty in the energy, Et
h 4 381
College Physics
Student Solutions Manual
given the lifetime of the
Chapter 33
from Table 33.2: π0
E
h 6.63 10 34 J s 1 eV 6.28 10 19 J 3.9 eV 17 4t 4 (8.4 10 s) 1.60 10 19 J
(b) The fraction of the decay energy is determined by dividing this uncertainty in the energy by the rest mass energy of the
found
0 in Table 33.2: .
E 3.9256 eV 2.9 10 8 2 6 2 2 m 0 c 135.0 10 eV c c So the uncertainty is approximately
percent of the rest 2.9 10 6
mass energy.
33.5 QUARKS: IS THAT ALL THERE IS? 25.
Repeat the previous problem for the decay mode
. 0 K
Soluti on
(a) From Table 33.4, we know the quark composition of each of the particles involved in this decay:
Then, to ( sss ) 0 (uds ) K (u s ).
determine the change in strangeness, we need to subtract the 382
College Physics
Student Solutions Manual
Chapter 33
initial from the final strangeness, remembering that a strange quark has a strangeness of -1: S S f S i 1 (1) ( 3) 1
(b) Using Table 33.3, we know that
, 1 1 1 1 3 3 3
Bi
so the baryon number is indeed 1 1 1 1 1 1, 3 3 3 3 3
Bf
conserved. Again, using Table 33.3, the charge is: , so 1 1 1 2 1 1 2 1 Qi qe qe , and Qf qe qe qe 3 3 3 3 3 3 3 3
charge is indeed conserved. This decay does not involve any electrons or neutrinos, so all lepton numbers are zero before and after, and the lepton numbers are unaffected by the decay. (c) Using Table 33.4, we can write the equation in terms of its constituent quarks:
.Since there is a
( sss ) (uds ) us or s u u d
change in quark flavor, the weak nuclear force is responsible for the decay.
31.
(a) Is the decay
possible considering the appropriate n
conservation laws? State why or why not. (b) Write the decay in terms of the quark constituents of the particles.
383
College Physics
Soluti on
Student Solutions Manual
Chapter 33
(a) From Table 33.4, we know the quark composition of each of the particles involved in the decay:
. The (dds) n(udd ) (ud )
charge is conserved at -1. The baryon number is conserved at B=1. All lepton numbers are conserved at zero, and finally the mass initially is larger than the final mass:
, so, m (mn m )
yes, this decay is possible by the conservation laws. (b) Using Table 33.4, we can write the equation in terms of its constituent quarks: dds udd ud or s u u d
37.
(a) How much energy would be released if the proton did decay via the conjectured reaction
? (b) Given that the p 0 e
two
s and that the
decays to
0
will find an electron to annihilate, what total e
energy is ultimately produced in proton decay? (c) Why is this energy greater than the proton’s total mass (converted to energy)?
Soluti on
(a) The energy released from the reaction is determined by the change in the rest mass energies:
E mc 2 i mc 2
m f
p
m 0 me c 2
Using Table 33.2, we can then determine this difference in rest mass energies:
384
College Physics
Student Solutions Manual
Chapter 33
E 938.3 MeV c 2 135.0 MeV c 2 0.511 MeV c 2 c 2 802.8 MeV 803 MeV
(b) The two
rays will carry a total energy of the rest mass energy
of the
:
0 0 2 E 0 m 0 c 2 135.0 MeV The positron/electron annihilation will give off the rest mass energies of the positron and the electron: e e 2 Ee 2me c 2 2(0.511 MeV ) 1.022 MeV
So, the total energy would be the sum of all these energies: E tot E E 0 E e 938.8 MeV
(c) Because the total energy includes the annihilation energy of an extra electron. So the full reaction should be . p e 0 e e 4
33.6 GUTS: THE UNIFICATION OF FORCES 43.
Integrated Concepts The intensity of cosmic ray radiation decreases rapidly with increasing energy, but there are occasionally extremely energetic cosmic rays that create a shower of radiation from all the particles they create by striking a nucleus in the atmosphere as seen in the figure given below. Suppose a cosmic ray
385
College Physics
Student Solutions Manual
particle having an energy of
Chapter 33
converts its energy into 1010 GeV
particles with masses averaging
. (a) How many particles 200 MeV/ c 2
are created? (b) If the particles rain down on a
area, how 1.00 - km 2
many particles are there per square meter?
Soluti on
(a) To determine the number of particles created, divide the cosmic ray particle energy by the average energy of each particle created:
cosmic ray energy 1010 GeV # of particles created 5 1010 2 2 energy particle created 0.200 GeV c c (b) Divide the number of particles by the area they hit:
particles m 2
49.
5 1010 particles 5 10 4 particles m 2 2 1000 m
Integrated Concepts Suppose you are designing a proton decay experiment and you can detect 50 percent of the proton decays in a tank of water. (a) How many kilograms of water would you need to see one decay per month, assuming a lifetime of
? (b) How 10 31 y
many cubic meters of water is this? (c) If the actual lifetime is
, 10 33 y
how long would you have to wait on an average to see a single 386
College Physics
Student Solutions Manual
Chapter 33
proton decay?
Soluti on
(a) On average, one proton decays every
. So 10 31 y 12 10 31 months
for one decay every month, you would need:
1 decay 1 N 12 10 31 protons month 12 10 months/dec ay
N
31
Since you detect only 50% of the actual decays, you need twice this number of protons to observe one decay per month, or . Now, we know that one N 24 10 31 protons
molecule has 10 H 2O
protons (1 from each hydrogen plus 8 from the oxygen), so we need
. Finally, since we know how many molecules we 24 10 30 H 2 O
need, and we know the molar mass of water, we can determine the number of kilograms of water we need.
24 10
30
1 mole 0.018 kg 5 7.2 10 kg of water 23 mole 6.02 10 molecules
molecules
(b) Now, we know the density of water,
, so we can 1000 kg/m 3
determine the volume of water we need:
1 m3 7.2 10 2 m 3 1000 kg
V m 7.2 10 kg 5
387
College Physics
Student Solutions Manual
(c) If we had
Chapter 33
of water, and the actual decay rate was 7.2 10 2 m 3
, rather than
1033 y
, a decay would occur 100 times less often, and 1031 y
we would have to wait on average 100 months to see a decay.
388
College Physics
Student Solutions Manual
Chapter 34
CHAPTER 34: FRONTIERS OF PHYSICS 34.1 COSMOLOGY AND PARTICLE PHYSICS 1.
Find the approximate mass of the luminous matter in the Milky Way galaxy, given it has approximately
stars of average mass 1.5 1011
times that of our Sun.
Soluti on
The approximate mass of the luminous matter in the Milky Way galaxy can be found by multiplying the number of stars times 1.5 times the mass of our Sun:
M 1011 1.5 mS 1011 1.5 1.99 1030 kg 3 10 41 kg
7.
(a) What is the approximate velocity relative to us of a galaxy near the edge of the known universe, some 10 Gly away? (b) What fraction of the speed of light is this? Note that we have observed galaxies moving away from us at greater than
.
0.9c
Soluti on
(a) Using
and the Hubble constant, we can calculate the v H 0d
approximate velocity of the near edge of the known universe:
389
College Physics
Student Solutions Manual
Chapter 34
v H 0 d 20 km/s Mly 10 103 Mly 2.0 105 km/s (b) To calculate the fraction of the speed of light, divide this velocity by the speed of light: v 2.0 10 5 km/s 10 3 m/km 0.67, so that v 0.67c c 3.00 10 8 m/s
11.
Andromeda galaxy is the closest large galaxy and is visible to the naked eye. Estimate its brightness relative to the Sun, assuming it has luminosity
times that of the Sun and lies 2 Mly away. 1012
Soluti on
The relative brightness of a star is going to be proportional to the ratio of surface areas times the luminosity, so: .
rSun 4πr 2 Relative Brightness luminosity 1012 2 4πRAndromeda RAndromeda
2
From Appendix C, we know the average distance to the sun is , and we are told the average distance to Andromeda, so: 1.496 1011 m .
10 1.496 10 m 2 10 ly 9.46 10 m/ly 12
Relative Brightness
11
6
15
2
2
6 10 11
Note: this is an overestimate since some of the light from Andromeda
390
College Physics
Student Solutions Manual
Chapter 34
is blocked by its own gas and dust clouds.
15.
(a) What Hubble constant corresponds to an approximate age of the universe of
y? To get an approximate value, assume the 1010
expansion rate is constant and calculate the speed at which two galaxies must move apart to be separated by 1 Mly (present average galactic separation) in a time of
y. (b) Similarly, what Hubble 1010
constant corresponds to a universe approximately
-y old? 2 1010
Soluti on
(a) Since the Hubble constant has units of
, we can km s Mly
calculate its value by considering the age of the universe and the average galactic separation. If the universe is
years old, then 1010
it will take
years for the galaxies to travel 1 Mly. Now, to 1010
determine the value for the Hubble constant, we just need to determine the average velocity of the galaxies from the equation : d vt
391
College Physics
Student Solutions Manual
Chapter 34
d 1 Mly 1 10 6 ly 9.46 1012 km 1y , so that v 10 30 km/s. 10 t 1 ly 10 y 10 y 3.156 10 7 s 30 km/s Thus, H 0 30 km/s Mly 1 Mly v
(b) Now, the time is
years, so the velocity becomes: 21010
v
1 Mly 1 10 6 ly 9.46 1012 km 1y 15 km/s. 10 10 2 10 y 2 10 y 1 ly 3.156 10 7 s
Thus, the Hubble constant would be approximately
H0
15 km/s 15 km/s Mly 1 Mly
16.
Show that the velocity of a star orbiting its galaxy in a circular orbit is inversely proportional to the square root of its orbital radius, assuming the mass of the stars inside its orbit acts like a single mass at the center of the galaxy. You may use an equation from a previous chapter to support your conclusion, but you must justify its use and define all terms used.
Soluti on
A star orbiting its galaxy in a circular orbit feels the gravitational force acting toward the center, which is the centripetal force (keeping the star orbiting in a circle). So, from
, we get an F G
mM r2
expression for the gravitational force acting on the star, and from
Fc m
v2 r
392
College Physics
Student Solutions Manual
Chapter 34
, we get an expression for the centripetal force keeping the Fc m
v2 r
star orbiting in a circle. Setting the two forces equal gives: , where F
mv 2 GMm 2 r r
is the mass of the star,
m
is the mass of M
the galaxy (assumed to be concentrated at the center of the rotation),
is the gravitational constant,
v
G and
is the velocity of the star,
is the orbital radius. Solving the equation for the velocity r
gives:
so that the velocity of a star orbiting its galaxy in a
v
GM r
circular orbit is indeed inversely proportional to the square root of its orbital radius.
This file is copyright 2015, Rice University. All Rights Reserved.
393