Alcatel-Lucent 7302
INTELLIGENT SERVICES ACCESS MANAGER
Alcatel-Lucent 7330
INTELLIGENT SERVICES ACCESS MANAGER FIBER TO THE NODE
Alcatel-Lucent 7356
INTELLIGENT SERVICES ACCESS MANAGER FIBER TO THE BUILDING CLI COMMAND GUIDE FOR FD 24GBPS NT
R4.3.02 3 H H - 0 4 4 16- DDC A- T C ZZA Edi tio n 02 Re le ase d Alcatel-Lucent Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreements. Copyright 2011 © Alcatel-Lucent. All rights reserved.
Status Change Note Short Title
Released
Released CD CLI CMD GUIDE All rigths reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel-Lucent.
3HH-08079-DDCA-TCZZA
01
Contents
Contents 1- ISAM CLI
1
1.1 History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 CLI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 The CLI Prompt . . . . . . . . . . . . . . . . . . . . . . . . . 1.10 Entering CLI Commands . . . . . . . . . . . . . . . . . . . . 1.11 CLI Backward Compatibility . . . . . . . . . . . . . . . . . . 1.12 Phase Out Strategy Obsolete Commands and/or Parameters 1.13 Command Phase Out Annoucement Release . . . . . . . . . 1.14 Non supported commands/parameters . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
2- Environment Configuration Commands
2 60 61 62 63 66 67 68 69 70 71 73 74 75
77
2.1 Environment Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 78 2.2 Environment Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
3- Alarm Configuration Commands
81
3.1 Alarm Configuration Command Tree . . . . . . . . . 3.2 Alarm Log Configuration Command . . . . . . . . . . 3.3 Alarm Entry Configuration Command . . . . . . . . . 3.4 Alarm Delta Log Configuration Command . . . . . . 3.5 SHub Alarm Configuration Command . . . . . . . . . 3.6 Customizable Alarm Profile Configuration Command
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
4- Trap Configuration Commands
. . . . . .
82 84 86 100 102 105
110
4.1 Trap Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 4.2 Trap Definition Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 4.3 Trap Manager Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
5- Equipment Configuration Commands 5.1 Equipment Configuration Command Tree . . . . . 5.2 Rack Configuration Command . . . . . . . . . . . . 5.3 Shelf Configuration Command . . . . . . . . . . . . 5.4 Slot Configuration Command . . . . . . . . . . . . 5.5 Applique Configuration Command . . . . . . . . . . 5.6 Protection Group Configuration Command . . . . . 5.7 Protection Element Configuration Command . . . . 5.8 External-link-host Configuration Commands . . . . 5.9 Host Shelf SFP Configuration Commands . . . . . 5.10 NE Configuration Command . . . . . . . . . . . . 5.11 Environment Monitoring Configuration Command 5.12 Configure Fan Tray parameters . . . . . . . . . .
118 . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
6- xDSL Configuration Commands
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
119 121 122 124 126 128 129 131 133 135 136 137
138
6.1 xDSL Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
3HH-08079-DDCA-TCZZA 01
Released
i
Contents
6.2 xDSL Common Service Profile Configuration Command . . . . . . . . . . . . 6.3 xDSL Common Spectrum Profile Configuration Command . . . . . . . . . . . 6.4 xDSL Artificial Noise Downstream Configuration Command . . . . . . . . . . . 6.5 xDSL Spectrum Profile for ADSL/ADSL2 Configuration Command . . . . . . . 6.6 xDSL Spectrum Profile for RE-ADSL2 Configuration Command . . . . . . . . 6.7 xDSL Spectrum Profile for ADSL2 Plus Configuration Command . . . . . . . . 6.8 ADSL2-plus Custom PSD shape Configuration Command . . . . . . . . . . . 6.9 xDSL Spectrum Profile for VDSL Configuration Command . . . . . . . . . . . 6.10 VDSL Ghs Tones Transmission Power Control Configuration Command . . . 6.11 VDSL Custom PSD shape Downstream Configuration Command . . . . . . . 6.12 VDSL Custom RX PSD shape Upstream Configuration Command . . . . . . 6.13 VDSL Power Back Off Configuration Command . . . . . . . . . . . . . . . . 6.14 xDSL Spectrum Profile for VDSL2 Configuration Command . . . . . . . . . . 6.15 VDSL2 Custom PSD shape Downstream Configuration Command . . . . . . 6.16 VDSL2 Custom PSD shape Upstream Configuration Command . . . . . . . . 6.17 VDSL2 Custom RX PSD shape Upstream Configuration Command . . . . . . 6.18 VDSL2 Virtual Noise Downstream Configuration Command . . . . . . . . . . 6.19 VDSL2 Virtual Noise Upstream Configuration Command . . . . . . . . . . . . 6.20 VDSL2 Power Back Off Configuration Command . . . . . . . . . . . . . . . . 6.21 xDSL DPBO Profile Configuration Command . . . . . . . . . . . . . . . . . . 6.22 xDSL DPBO Mode Independent Custom PSD Mask Configuration Command 6.23 xDSL DPBO Exchange PSD Mask Configuration Command . . . . . . . . . . 6.24 xDSL RTX Profile Configuration Command . . . . . . . . . . . . . . . . . . . 6.25 xDSL Vectoring Profile Configuration Command . . . . . . . . . . . . . . . . 6.26 xDSL Vectoring Control Entity Profile Configuration Command . . . . . . . . 6.27 xDSL Line Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 6.28 xDSL Line TCA Threshold Configuration Command . . . . . . . . . . . . . . 6.29 xDSL Board Configuration Command . . . . . . . . . . . . . . . . . . . . . . 6.30 xDSL Per Line Overrule Configuration Command . . . . . . . . . . . . . . . 6.31 xDSL Overrule Noise Psd Shape Downstream Configuration Command . . . 6.32 xDSL Overrule Noise Psd Shape Upstream Configuration Command . . . . . 6.33 xDSL INS Near End Configuration Command . . . . . . . . . . . . . . . . . . 6.34 xDSL INS Far End Configuration Command . . . . . . . . . . . . . . . . . . 6.35 xDSL Vectoring Processing Board Configuration Command . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7- ATM Configuration Commands
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
148 152 158 160 163 165 169 171 178 180 182 184 185 191 193 195 197 199 201 203 205 207 209 213 216 219 224 227 229 236 238 240 242 244
246
7.1 ATM Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 7.2 ATM PVC Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 7.3 IPOA X-connect L2 interworking port Configuration Command . . . . . . . . . . . . . . . . 250
8- Interface Management Configuration Commands
252
8.1 Interface Management Configuration Command Tree . . . . . 8.2 Network Interface Configuration Command . . . . . . . . . . . 8.3 Extend Interface Configuration Command . . . . . . . . . . . 8.4 Interface Alarm Configuration Command . . . . . . . . . . . . 8.5 SHub Management Interface Configuration Command . . . . 8.6 SHub IP Configuration Command . . . . . . . . . . . . . . . . 8.7 SHub ICMP Configuration Command . . . . . . . . . . . . . . 8.8 SHub Multi-Network Configuration Command . . . . . . . . . 8.9 SHub Unnumbered Interface Configuration Command . . . . 8.10 SHub External Voice forwarding Configuration Command . . 8.11 SHub Port Control Configuration Command . . . . . . . . . . 8.12 SHub Interface Uplink Group Configuration Command . . . . 8.13 SHub Interface Uplink Group Portlist Configuration Command 8.14 SHub System Port Mirroring Configuration Command . . . . 8.15 SHub External-Traffic-Mirroring Configuration Command . . 8.16 SHub Internal-Traffic-Mirroring Configuration Command . . .
ii
Released
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
3HH-08079-DDCA-TCZZA
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
253 255 259 260 261 262 263 264 265 266 267 269 270 271 272 274
01
Contents
9- Error Configuration Commands
276
9.1 Error Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 277 9.2 Error Log Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 278
10- System Configuration Commands
279
10.1 System Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.2 System Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.3 System Management Host IP Address Configuration Command . . . . . . . . . . . . . 10.4 System Management Vlan Host IP-Address Configuration Command . . . . . . . . . . . 10.5 System Management Default Route Configuration Command . . . . . . . . . . . . . . . 10.6 System SNTP Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.7 System SNTP Server Table Configuration Command . . . . . . . . . . . . . . . . . . . 10.8 System Loop ID Syntax Configuration Command . . . . . . . . . . . . . . . . . . . . . . 10.9 SHub System ICMP Filter Configuration Command . . . . . . . . . . . . . . . . . . . . 10.10 SHub System ICMP Filter In Port List Configuration Command . . . . . . . . . . . . . 10.11 SHub System ICMP Filter Out Port List Configuration Command . . . . . . . . . . . . 10.12 SHub System TCP Filter Configuration Command . . . . . . . . . . . . . . . . . . . . 10.13 SHub System TCP Filter In Port List Configuration Command . . . . . . . . . . . . . . 10.14 SHub System TCP Filter Out Port List Configuration Command . . . . . . . . . . . . . 10.15 SHub System UDP Filter Configuration Command . . . . . . . . . . . . . . . . . . . . 10.16 SHub System UDP Filter In Port List Configuration Command . . . . . . . . . . . . . . 10.17 SHub System UDP Filter Out Port List Configuration Command . . . . . . . . . . . . . 10.18 SHub System Other Protocol Filter Configuration Command . . . . . . . . . . . . . . . 10.19 SHub System Other Protocol Filter In Port List Configuration Command . . . . . . . . 10.20 SHub System Other Protocol Filter Out Port List Configuration Command . . . . . . . . 10.21 SHub System Other Protocol Filter Ip-filter In-port Configuration Command . . . . . . . 10.22 SHub System Other Protocol Filter Ip-filter Out-port Configuration Command . . . . . . 10.23 SHub System ID Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 10.24 SHub System VLAN Group Configuration Command . . . . . . . . . . . . . . . . . . . 10.25 SHub System ICMP Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 10.26 System Clock Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . 10.27 System Synchronous Interface Timing Clock Switching Mode Configuration Command 10.28 System Clock Bits Mode Configuration Command . . . . . . . . . . . . . . . . . . . . 10.29 System Clock Source Priority Configuration Command . . . . . . . . . . . . . . . . . . 10.30 System Clock Synchronous Status Message Configuration Command . . . . . . . . . 10.31 System Clock Synchronous Source port Configuration Command . . . . . . . . . . . . 10.32 System Clock Force Reference Configuration Command . . . . . . . . . . . . . . . . . 10.33 SSMOut Configuration Command for synce ports . . . . . . . . . . . . . . . . . . . . . 10.34 SSMOut Configuration Command for XDSL ports . . . . . . . . . . . . . . . . . . . . . 10.35 Maximum Lt Link Speed Configuration Command . . . . . . . . . . . . . . . . . . . . .
11- Security Configuration Commands 11.1 Security Configuration Command Tree . . . . . . . . . . . . . . . 11.2 Security Banner Configuration Commmand . . . . . . . . . . . . . 11.3 Operator Configuration Command . . . . . . . . . . . . . . . . . . 11.4 Profile Configuration Command . . . . . . . . . . . . . . . . . . . 11.5 Default Profile Configuration Command . . . . . . . . . . . . . . . 11.6 SNMP View Configuration Command . . . . . . . . . . . . . . . . 11.7 Security SNMP Community Configuration Command . . . . . . . . 11.8 Security SNMPv3 Group Configuration Command . . . . . . . . . 11.9 Security SNMPv3 User Configuration Command . . . . . . . . . . 11.10 Security SNMPv3 User-Group Configuration Command . . . . . 11.11 SNMP Notify View Configuration Command . . . . . . . . . . . . 11.12 Security SNMP Notification Profile Configuration Command . . . 11.13 Security SNMP Notification Profile Filter Configuration Command 11.14 Security SNMP Element Manager Configuration Command . . . 11.15 Security RADIUS Client Configuration Command . . . . . . . . .
3HH-08079-DDCA-TCZZA 01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
281 284 287 288 289 290 291 292 294 297 298 300 303 304 306 309 310 312 315 316 318 321 324 325 326 327 328 331 332 333 336 338 339 341 343
344 . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
Released
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
345 350 351 353 360 366 368 370 373 375 377 379 381 383 385
iii
Contents
11.16 Security RADIUS Authentication Server Configuration Command . . . . 11.17 Security RADIUS Accounting Server Configuration Command . . . . . . 11.18 Security RADIUS Dynamic Authorization Client Configuration Command 11.19 Security RADIUS Policy Configuration Command . . . . . . . . . . . . . 11.20 Security RADIUS Server Configuration Command . . . . . . . . . . . . 11.21 Security Domain Configuration Command . . . . . . . . . . . . . . . . . 11.22 Security Connection Profile Configuration Command . . . . . . . . . . . 11.23 Security Connection Policy Configuration Command . . . . . . . . . . . 11.24 Security 802.1x PAE System Configuration Command . . . . . . . . . . 11.25 Security 802.1x Port Authentication Configuration Command . . . . . . 11.26 Security 802.1x Extension, Port Authentication Configuration Command 11.27 Security 802.1x Port Configuration Command . . . . . . . . . . . . . . . 11.28 Security Password Policy Configuration Commmand . . . . . . . . . . . 11.29 File Transfer Configure Command . . . . . . . . . . . . . . . . . . . . . 11.30 file Transfer server Configure Commands . . . . . . . . . . . . . . . . . 11.31 PM File Upload Configure Command . . . . . . . . . . . . . . . . . . . 11.32 PM File Upload Configure Command . . . . . . . . . . . . . . . . . . . 11.33 MAC Filter Configuration Command . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
12- Secure Shell Configuration Commands 12.1 Secure Shell Configuration Command Tree . . . . 12.2 SSH Server Configuration Command . . . . . . . 12.3 Secure Shell User Configuration Command . . . . 12.4 Secure Shell Access Configuration Command . . 12.5 Secure Shell SFTP User Configuration Command
. . . . . . . . . . . . . . . . . .
386 388 390 391 393 395 397 398 399 400 402 404 406 408 409 410 411 413
414 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
13- Transaction Configuration Commands
. . . . .
415 416 417 418 420
421
13.1 Transaction Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 422 13.2 Transaction Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 423
14- SYSLOG Configuration Commands
424
14.1 SYSLOG Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425 14.2 SYSLOG Destination Configuration command . . . . . . . . . . . . . . . . . . . . . . . . 426 14.3 SYSLOG Route Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
15- PCCP Configuration Commands
431
15.1 PCCP Configuration Command Tree . . . . . . . . . . . . . . . . . 15.2 SHub PCCP Module Configuration Command . . . . . . . . . . . . 15.3 SHub PCCP Group Entry Configuration Command . . . . . . . . . . 15.4 SHub Static network Port for PCCP Group Configuration Command
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
16- Software Management Configuration Commands
. . . .
432 433 434 436
437
16.1 Software Management Configuration Command Tree . . . . . . . . . . . . . . . . . . . . 438 16.2 Software Management Overall Software Package Configuration Command . . . . . . . . 439 16.3 Database Automatic Activation Configure Command . . . . . . . . . . . . . . . . . . . . . 442
17- Ethernet Configuration Commands
444
17.1 Ethernet Configuration Command Tree . . . . . . . . . . . . 17.2 Ethernet IP Configuration Command . . . . . . . . . . . . . 17.3 SHub Ethernet MAC Filter Configuration Command . . . . . 17.4 SHub Ethernet MAC Filter Port List Configuration Command 17.5 SHub Ethernet MAC Filter Configuration Command . . . . . 17.6 SHub Ethernet Rate Configuration Command . . . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
18- QoS Configuration Commands
iv
Released
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
445 446 447 449 451 453
455
3HH-08079-DDCA-TCZZA
01
Contents
18.1 QoS Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2 QoS Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3 QoS 802.1P Class-to-Queue Mapping Configuration Command . . . . . . . . . . . . 18.4 QoS Dsl Control Pkt Policer Configuration Command . . . . . . . . . . . . . . . . . 18.5 QoS DSCP-to-Dot1P Alignment for L3 Forwarded Traffic Configuration Command . 18.6 QoS Queue Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . 18.7 QoS Scheduler Node Profile Configuration Command . . . . . . . . . . . . . . . . . 18.8 QoS CAC Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.9 QoS Single Dot1P Marker Configuration Command . . . . . . . . . . . . . . . . . . 18.10 QoS Single DSCP Marker Configuration Command . . . . . . . . . . . . . . . . . . 18.11 QoS DSCP Contract Table Marker Configuration Command . . . . . . . . . . . . . 18.12 QoS DSCP Contract Table Code-point Configuration Command For DSCP-contract 18.13 QoS Dot1P and DSCP Contract Table Marker Configuration Command . . . . . . . 18.14 DSCP Contract Table Codepoint Configuration Command For D1p-dscp-contract . 18.15 QoS Dot1P and Single DSCP Marker Configuration Command . . . . . . . . . . . 18.16 QoS Dot1P Alignment Marker Configuration Command . . . . . . . . . . . . . . . . 18.17 QoS Dot1P Remark Table Marker Configuration Command . . . . . . . . . . . . . 18.18 QoS DSCP Contract Table Code-point Configuration Command For DSCP-contract 18.19 QoS Policer Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.20 QoS L2 Filter Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.21 QoS L3 Filter Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.22 QoS Policy Action Profile Configuration Command . . . . . . . . . . . . . . . . . . 18.23 QoS Policy Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . 18.24 QoS Session Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.25 QoS Session Upstream Policy List Configuration Command . . . . . . . . . . . . . 18.26 QoS Session Downstream Policy List Configuration Command . . . . . . . . . . . 18.27 QoS Shaper Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.28 QoS Bandwidth Profile Configuration Command . . . . . . . . . . . . . . . . . . . 18.29 QoS IngressQoS Profile Configuration Command . . . . . . . . . . . . . . . . . . . 18.30 QoS Board-Level Queue and Performance Configuration Command . . . . . . . . 18.31 QoS Queue Threshold Crossing Alarm Configuration Command . . . . . . . . . . . 18.32 QoS DSL Link Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . 18.33 QoS LIM Queue Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.34 QoS ShdSL Link Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.35 QoS LIM Queue (SHDSL) Configuration Command . . . . . . . . . . . . . . . . . . 18.36 QoS Interface Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . 18.37 QoS Interface Queue Configuration Command . . . . . . . . . . . . . . . . . . . . 18.38 QoS Interface Upstream Queue Configuration Command . . . . . . . . . . . . . . 18.39 QoS Interface Remote Downstream Queue Configuration Command . . . . . . . . 18.40 SHub QoS Traffic Class Configuration Command . . . . . . . . . . . . . . . . . . . 18.41 SHub QoS Queue Configuration Command . . . . . . . . . . . . . . . . . . . . . . 18.42 SHub QoS DSCP2P Map Configuration Command . . . . . . . . . . . . . . . . . . 18.43 SHub QoS Flow Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.44 SHub QoS Policer Configuration Command . . . . . . . . . . . . . . . . . . . . . . 18.45 SHub QoS Ingress Policing on Port Configuration Command . . . . . . . . . . . . 18.46 QoS Line Control Packets Rate Limit Configuration Command . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19- VLAN Configuration Commands
457 462 464 466 467 468 471 473 475 476 477 478 479 480 481 482 484 485 486 489 491 493 495 497 500 501 502 504 506 509 511 514 516 518 520 522 525 528 531 533 534 536 537 539 541 542
544
19.1 VLAN Configuration Command Tree . . . . . . . . . . . . . . . . . . . 19.2 VLAN General Configuration Command . . . . . . . . . . . . . . . . . . 19.3 Virtual MAC Configuration Command . . . . . . . . . . . . . . . . . . . 19.4 VLAN Configuration Command . . . . . . . . . . . . . . . . . . . . . . 19.5 VLAN Filtering Database Configuration Command . . . . . . . . . . . . 19.6 VLAN Port Filtering Database Configuration Command . . . . . . . . . 19.7 VLAN Protocol-based Configuration Command . . . . . . . . . . . . . . 19.8 SHub General VLAN Configuration Command . . . . . . . . . . . . . . 19.9 SHub VLAN Configuration Command . . . . . . . . . . . . . . . . . . . 19.10 SHub Static Egress Port for VLAN Configuration Command . . . . . . 19.11 SHub Static Untagged Egress Port for VLAN Configuration Command
3HH-08079-DDCA-TCZZA 01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
Released
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
545 547 549 550 556 558 560 563 564 566 568
v
Contents
19.12 SHub Unicast MAC Filtering Database Configuration Command . . . . . . . . . . . . . . 569 19.13 Vlan Pbit Traffic Counter Configuration Command . . . . . . . . . . . . . . . . . . . . . 571 19.14 Vlan Priority Regeneration Profile Configuration Command . . . . . . . . . . . . . . . . . 573
20- Bridge Configuration Commands 20.1 Bridge Configuration Command Tree . . . . . . . . . . . 20.2 Bridge General Configuration Command . . . . . . . . . 20.3 Bridge Port Configuration Command . . . . . . . . . . . 20.4 Bridge Port to VLAN Association Configuration Command 20.5 L2 Static User Ip Address Configuration Command . . . . 20.6 SHub Bridge Configuration Command . . . . . . . . . . . 20.7 SHub Bridge Port Configuration Command . . . . . . . . 20.8 Mac learning Configuration Command . . . . . . . . . . .
575 . . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
21- Link Aggregation Configuration Commands
. . . . . . . .
576 578 579 584 589 591 592 594
595
21.1 Link Aggregation Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . 596 21.2 Link Aggregation Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . 597 21.3 Link Aggregation Group Configuration Command . . . . . . . . . . . . . . . . . . . . . . 598
22- Multiple Spanning Tree Configuration Commands
601
22.1 Multiple Spanning Tree Configuration Command Tree . . . . 22.2 SHub MSTP general configuration Command . . . . . . . . 22.3 SHub MSTP Instance configuration Command . . . . . . . . 22.4 SHub MSTP Vlan-Instance Mapping configuration Command 22.5 SHub MSTP Port configuration Command . . . . . . . . . . 22.6 SHub MSTP Port-Instance configuration Command . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
23- IP Configuration Commands 23.1 IP Configuration Command Tree . . . . . . . . . . . . . . . 23.2 VLAN Bundle Configuration Command . . . . . . . . . . . 23.3 VRF Configuration Command . . . . . . . . . . . . . . . . 23.4 IP Interface Network Configuration Command . . . . . . . 23.5 IP Interface Network Numbered Configuration Command . 23.6 IP Interface User Port Configuration Command . . . . . . . 23.7 IP User Port ARP Proxy Statistics Configuration Command 23.8 IP Interface User Bridge Port Configuration Command . . . 23.9 IP User Gateway Interface VRF Configuration Command . 23.10 VRF Route Configuration Command . . . . . . . . . . . . 23.11 IP SHub VRF Configuration Command . . . . . . . . . . 23.12 IP SHub VRF Route Map Command . . . . . . . . . . . . 23.13 IP SHub VRF Route Preference Command . . . . . . . . 23.14 IP SHub VRF Route Configuration Command . . . . . . . 23.15 IP SHub VRF ARP Configuration Command . . . . . . . . 23.16 IP SHub ARP Configuration Command . . . . . . . . . . 23.17 IP SHub ARP per VLAN Configuration Command . . . . . 23.18 IP SHub VRF Route Preference Command . . . . . . . .
. . . . . .
602 603 605 606 607 609
611 . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
24- ARP-RELAY Configuration Commands
. . . . . . . . . . . . . . . . . .
612 614 615 617 618 619 621 623 625 626 628 630 632 633 635 636 637 638
639
24.1 ARP-RELAY Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 640 24.2 Arp-Relay Statistics Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 641
25- IGMP Configuration Commands
643
25.1 IGMP Configuration Command Tree . . . . . . . . . . . . . . . . . . . . 25.2 IGMP Channel Configuration Command . . . . . . . . . . . . . . . . . 25.3 IGMP Channel Permission Package Members Configuration Command 25.4 IGMP Channel Preview Package Members Configuration Command . .
vi
Released
. . . .
. . . .
. . . .
. . . .
3HH-08079-DDCA-TCZZA
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
644 647 651 653
01
Contents
25.5 IGMP Package Bitmaps Configuration Command . . . . . . . . . . 25.6 IGMP System Configuration Command . . . . . . . . . . . . . . . . 25.7 IGMP System CDR Type Configuration Command . . . . . . . . . . 25.8 IGMP Vlan System Configuration Command . . . . . . . . . . . . . 25.9 SHub IGMP IGS System Configuration Command . . . . . . . . . . 25.10 SHub IGMP Response Timer Configuration Command . . . . . . . 25.11 SHub IGMP Router Port Configuration Command . . . . . . . . . . 25.12 SHub IGMP VLAN Filter Configuration Command . . . . . . . . . . 25.13 Shub IGMP Vlan enhanced performance Configuration Command 25.14 Shub IGMP CAC BUNDLE TABLE Configuration Command . . . . 25.15 IGMP Multicast Vlan Translation Command . . . . . . . . . . . . . 25.16 Igmp Multicast Service Context Configuration Command . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
26- Multicast Configuration Commands . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
27- PPPoX-Relay Configuration Commands
. . . . . . . . . . . . . . .
674 676 678 679 680 682 683 685 686 687 688 690 691 692 694
696
27.1 PPPoX-Relay Configuration Command Tree . . . . . . . . . . . . . . 27.2 PPPoX Cross-connect Global Configuration Command . . . . . . . . 27.3 PPPoX Cross-connect Engine Configuration Command . . . . . . . . 27.4 PPPoX Cross-connect Engine Monitoring Configuration Command . . 27.5 PPPoX Cross-connect Client Port Configuration Command . . . . . . 27.6 PPPoX Cross-connect Client Port Monitoring Configuration Command
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
28- DHCP Relay Configuration Commands
. . . . . .
697 698 700 702 703 706
708
28.1 DHCP Relay Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . 28.2 DHCP Relay User Port Configuration Command . . . . . . . . . . . . . . . . . . . 28.3 DHCP Relay Agent Configuration Command . . . . . . . . . . . . . . . . . . . . . 28.4 DHCP Relay SHub Configuration Command . . . . . . . . . . . . . . . . . . . . . 28.5 DHCP Relay SHub Server Configuration Command per VRF . . . . . . . . . . . . 28.6 DHCP Relay SHub Agent Configuration Command per VRF . . . . . . . . . . . . . 28.7 DHCP Relay SHub Configuration Command per VRF . . . . . . . . . . . . . . . . 28.8 DHCP Relay SHub Server Configuration Command per VRF . . . . . . . . . . . . 28.9 DHCP Relay SHub Agent Instances Configuration Command per VRF . . . . . . . 28.10 DHCP Relay SHub Server Configuration Command per VRF and Agent instance 28.11 DHCP Relay SHub Agent Interface Association Command . . . . . . . . . . . . . 28.12 DHCP v6 Relay User Port Configuration Command . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . .
. . . .
. . . .
. . . .
29- OSPF Configuration Commands
3HH-08079-DDCA-TCZZA 01
655 657 660 661 662 664 665 666 669 670 671 672
673
26.1 Multicast Configuration Command Tree . . . . . . . . . . . . . 26.2 Multicast General Group Configuration Command . . . . . . . 26.3 General Multicast Package Members Configuration Command 26.4 Multicast Capacity Configuration Command . . . . . . . . . . . 26.5 Multicast Channel Configuration Command . . . . . . . . . . . 26.6 Multicast Channel Package Members Configuration Command 26.7 Multicast Channel Configuration Command . . . . . . . . . . . 26.8 Multicast Channel Package Members Configuration Command 26.9 Multicast Monitoring Source Configuration Command . . . . . 26.10 Multicast Monitoring Channel Configuration Command . . . . 26.11 Multicast Static Branch Configuration Command . . . . . . . 26.12 SHub IGMP CAC Multicast System Configuration Command . 26.13 SHub Static Multicast Streams Configuration Command . . . 26.14 SHub Static Multicast Egress Port Configuration Command . 26.15 SHub IGMP CAC Multicast Sources Configuration Command
29.1 OSPF Configuration Command Tree . . . . 29.2 OSPF Parameters Configuration Command 29.3 OSPF Area Configuration Command . . . . 29.4 OSPF Interface Configuration Command . .
. . . . . . . . . . . .
709 711 713 715 716 717 719 720 721 723 724 725
727 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
Released
. . . .
. . . .
. . . .
. . . .
728 731 733 734
vii
Contents
29.5 OSPF Interface Timers Configuration Command . . . 29.6 OSPF Interface MD5 Key Configuration Command . . 29.7 OSPF Interface Metric Configuration Command . . . 29.8 OSPF Aggregate Configuration Command . . . . . . 29.9 OSPF External Aggregate Configuration Command . 29.10 OSPF Stub Area Configuration Command . . . . . . 29.11 OSPF Interface Configuration Command . . . . . . 29.12 OSPF Interface Timers Configuration Command . . 29.13 OSPF Interface MD5 Key Configuration Command . 29.14 OSPF Interface Metric Configuration Command . . . 29.15 OSPF Stub Aggregate Configuration Command . . . 29.16 OSPF NSSA Area Configuration Command . . . . . 29.17 OSPF Interface Configuration Command . . . . . . 29.18 OSPF Interface Timers Configuration Command . . 29.19 OSPF Interface MD5 Key Configuration Command . 29.20 OSPF Interface Metric Configuration Command . . . 29.21 OSPF NSSA Aggregate Configuration Command . . 29.22 OSPF External Aggregate Configuration Command . 29.23 OSPF Redistribution Configuration Command . . . . 29.24 OSPF Redistribution Route Configuration Command
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
30- RIP Configuration Commands 30.1 RIP Configuration Command Tree . . . . . . . . 30.2 RIP Common Configuration Command . . . . . 30.3 RIP Redistribution Configuration Command . . . 30.4 RIP Interface Configuration Command . . . . . 30.5 RIP Interface Timers Configuration Command . 30.6 RIP Interface MD5 Key Configuration Command 30.7 RIP Interface Route Map Command . . . . . . . 30.8 RIP Route Aggregation Command . . . . . . . . 30.9 RIP Route Map Command . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
736 738 740 741 742 744 745 747 749 751 752 753 755 757 759 761 762 763 765 766
767 . . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
31- Cluster Management Configure Commands 31.1 Cluster Management Configure Command Tree . . . 31.2 Cluster System Configuration Command . . . . . . . 31.3 Cluster Neighbor Discovery Configuration Command 31.4 Cluster Topology Collection Configuration Command 31.5 Cluster Port Configuration Command . . . . . . . . .
. . . . . . . . .
768 769 770 771 773 774 776 778 779
781 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
32.1 XDSL Bonding Configuration Command Tree . . . . . . . 32.2 XDSL Bonding Assembly Timer Configuration Command 32.3 xDSL Bonding Group Profile Configuration Command . . 32.4 xDSL Bonding Configuration Command . . . . . . . . . . 32.5 xDSL Bonding Configuration Command . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
33.1 CPE Remote Configuration Command Tree . . . . . . . . . 33.2 CPE Remote Management System Configuration Commands 33.3 CPE Manager Configuration Command . . . . . . . . . . . . 33.4 CPE IPProxy Session Configuration Command . . . . . . . . 33.5 CPE IPProxy Shub Vlan Configuration Command . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
32- XDSL Bonding Configuration Commands
782 783 784 785 786
787
33- CPE Remote Configuration Commands
788 789 790 793 795
796
34- SHDSL Configuration Commands
797 798 799 800 801
802
34.1 SHDSL Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 803 34.2 SHDSL Span Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 805
viii
Released
3HH-08079-DDCA-TCZZA
01
Contents
34.3 SHDSL Unit Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 810 34.4 SHDSL Segment Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . 812
35- IMA Configuration Commands
814
35.1 IMA Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 815 35.2 IMA Group Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 816 35.3 IMA Link Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 818
36- L2CP Configuration Commands 36.1 L2CP Configuration Command Tree . . . . . . . . 36.2 L2CP Configuration Command . . . . . . . . . . . 36.3 L2CP Session Configuration Command . . . . . . 36.4 L2CP User Port Partition Configuration Command
819 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
37.1 Voice Configuration Command Tree . . . . . . . . . . . . . . . . . . 37.2 Voice Sip Server Configuration Commands . . . . . . . . . . . . . . 37.3 Voice Sip LineId Syntax Profile Configuration Commands . . . . . . 37.4 Voice Sip User Agent Configuration Commands . . . . . . . . . . . 37.5 Sip Voice Service Provider Configuration Commands . . . . . . . . 37.6 Voice Sip User Agent Access Point Configuration Command . . . . 37.7 Voice Sip Dial Plan Configuration Commands . . . . . . . . . . . . 37.8 Voice Sip Dial Plan Digitmap Configuration Commands . . . . . . . 37.9 Voice Sip Termination Configuration Commands . . . . . . . . . . . 37.10 Voice Sip Termination TCA Threshold Configuration Command . . 37.11 Sip Voice Register Configuration Commands . . . . . . . . . . . . 37.12 Voice Sip Transport Configuration Commands . . . . . . . . . . . 37.13 Voice Sip Redundancy Table Configuration Commands . . . . . . 37.14 Voice Sip System Session Timer Configuration Commands . . . . 37.15 Voice Sip DNS Server Configuration Commands . . . . . . . . . . 37.16 Voice Sip DHCP Authentication Params Configuration Commands 37.17 manage restoration Failover/Failback type/mode . . . . . . . . . . 37.18 Voice Cluster Configuration Commands . . . . . . . . . . . . . . . 37.19 Voice Megaco IP Configuration Commands . . . . . . . . . . . . . 37.20 Voice Megaco Equipment Configuration Commands . . . . . . . . 37.21 Voice Megaco Equipment Board Configuration Commands . . . . 37.22 Voice Megaco Equipment Termination Configuration Commands . 37.23 Voice Megaco Media Gateway Configuration Commands . . . . . 37.24 Voice Megaco Signal Gateway Configuration Commands . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
37- Voice Configuration Commands
820 821 822 825
826
38- Debug Configuration Commands
827 832 835 837 840 845 847 848 849 852 854 856 858 861 863 865 867 868 869 871 873 875 879 889
891
38.1 Debug Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 892 38.2 Protocol Tracing Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 893
39- Ethernet User Ports Configuration Commands 39.1 Ethernet User Ports Configuration Command Tree . . . 39.2 Ethernet Line Configuration Command . . . . . . . . . 39.3 Ethernet Line TCA Threshold Configuration Command 39.4 Ethernet Line Mau Configuration Command . . . . . .
895 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
40- Efm Oam Configuration Commands
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
896 897 898 900
902
40.1 Efm Oam Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 903 40.2 Efm Oam Interface ConfigurationCommand . . . . . . . . . . . . . . . . . . . . . . . . . . 904
41- CFM Configuration Commands
3HH-08079-DDCA-TCZZA 01
906
Released
ix
Contents
41.1 CFM Configuration Command Tree . . . . . . . . . . . . . . . . . . 41.2 Maintenance Domain on NT Configuration Command . . . . . . . . 41.3 Maintenance Association on NT Configuration Command . . . . . . 41.4 Maintenance Association End Point on NT Configuration Command
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
42- Trouble-Shooting Configuration Commands
. . . .
907 908 910 912
914
42.1 Trouble-Shooting Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . 915 42.2 Trouble-shooting Interface Configuration Commands . . . . . . . . . . . . . . . . . . . . 916
43- IPoA/E IW Configuration Commands
918
43.1 IPoA/E IW Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 919 43.2 IPoA/E IW Interworking Port Configuration Command . . . . . . . . . . . . . . . . . . . . 920 43.3 IPoA/E IW Gateway Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 922
44- LineTest Configuration Commands
923
44.1 LineTest Configuration Command Tree . . . . . . . 44.2 Megaco LineTest Session Configuration Command 44.3 Megaco LineTest Line Configuration Command . . 44.4 MEGACO LineTest Param Configuration Command 44.5 SINGLE LineTest Session Configuration Command 44.6 SINGLE LineTest Line Configuration Command . . 44.7 SINGLE LineTest Param Configuration Command .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
45- LACP Configuration Commands . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
46.1 MSTP Configuration Command Tree . . . . . . . . . . 46.2 MSTP general configuration Command . . . . . . . . . 46.3 MSTP Instance configuration Command . . . . . . . . 46.4 MSTP Vlan-Instance Mapping configuration Command 46.5 MSTP Port configuration Command . . . . . . . . . . . 46.6 MSTP Port-Instance configuration Command . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
46- MSTP Configuration Commands
Released
946 947 948 949 951
952
47- Equipment Status Commands 47.1 Equipment Status Command Tree . . . . 47.2 Slot Status Command . . . . . . . . . . 47.3 Profile Description Command . . . . . . 47.4 Applique Status Command . . . . . . . . 47.5 Shelf Summary Status Command . . . . 47.6 Protection Element Status Command . . 47.7 Protection Group Status Command . . . 47.8 External-link-host Status Commands . . 47.9 External-link-remote Status Commands . 47.10 SFP/XFP Diagnostics Status Command 47.11 Board Temperature Status Command . 47.12 Transceiver Inventory Status Command 47.13 NE Status Command . . . . . . . . . . 47.14 Rack Status Command . . . . . . . . . 47.15 Shelf Status Command . . . . . . . . .
924 926 929 931 935 939 941
945
45.1 LACP Configuration Command Tree . . . 45.2 LACP general configuration command . . 45.3 LACP port configuration command . . . . 45.4 LACP group configuration command . . . 45.5 LACP Group Port configuration command .
x
. . . . . . .
953 954 956 957 958 960
962 . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
3HH-08079-DDCA-TCZZA
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. 963 . 964 . 969 . 970 . 974 . 976 . 979 . 982 . 986 . 989 . 995 . 997 .1000 .1002 .1004
01
Contents
48- Trap Status Commands
1007
48.1 Trap Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1008 48.2 Trap Manager Queue Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .1009
49- Alarm Log Status Commands 49.1 Alarm Log Status Command Tree . . . . . . . . . . . . . . . . 49.2 Alarm Log Status Command . . . . . . . . . . . . . . . . . . . 49.3 Equipment Alarm Log Status Command . . . . . . . . . . . . . 49.4 Equipment Holder Alarm Log Status Command . . . . . . . . . 49.5 Equipment Holder Extended Alarm Log Status Command . . . 49.6 Plug-in Unit Alarm Log Status Command . . . . . . . . . . . . 49.7 ATM Alarm Log Status Command . . . . . . . . . . . . . . . . 49.8 Ethernet Interface Alarm Log Status Command . . . . . . . . . 49.9 Software Management Alarm Log Status Command . . . . . . 49.10 xDSL Common Alarm Log Status Command . . . . . . . . . 49.11 xDSL Near-end Alarm Log Status Command . . . . . . . . . 49.12 xDSL Far-end Alarm Log Status Command . . . . . . . . . . 49.13 TCA xDSL Alarm Log Status Command . . . . . . . . . . . . 49.14 Vectoring Line Alarm Log Status Command . . . . . . . . . . 49.15 Vectoring Board Alarm Log Status Command . . . . . . . . . 49.16 Electrical-to-Optical Conversion Alarm Log Status Command 49.17 Authentication Alarm Log Status Command . . . . . . . . . . 49.18 xDSL Bonding Alarm Log Status Command . . . . . . . . . . 49.19 Redundancy Alarm Log Status Command . . . . . . . . . . . 49.20 Custom Alarm Log Status Command . . . . . . . . . . . . . . 49.21 SFP Alarm Log Status Command . . . . . . . . . . . . . . . 49.22 Custom External Alarm Log Status Command . . . . . . . . . 49.23 Plug In Unit Extended Alarm Log Status Command . . . . . . 49.24 Alarm Periodic Sealing Current Status Commands . . . . . . 49.25 SIP Server Alarm Log Status Commands . . . . . . . . . . . 49.26 SIP VSP Alarm Log Status Commands . . . . . . . . . . . . 49.27 SIP Dial Plan Alarm Log Status Commands . . . . . . . . . . 49.28 SIP Slot Alarm Log Status Commands . . . . . . . . . . . . . 49.29 SIP Termination Alarm Log Status Commands . . . . . . . . 49.30 Megaco Media Gateway Alarm Log Status Command . . . . 49.31 Megaco Signaling Gateway Alarm Log Status Command . . . 49.32 Megaco Plug Unit Alarm Log Status Command . . . . . . . . 49.33 Megaco Termination Alarm Log Status Command . . . . . . 49.34 Megaco Signaling Lt Alarm Log Status Command . . . . . . . 49.35 Shdsl Alarm Log Status Command . . . . . . . . . . . . . . . 49.36 Shdsl Alarm Log Status Command . . . . . . . . . . . . . . . 49.37 Ima-Group Alarm Log Status Command . . . . . . . . . . . . 49.38 Ima-Link Alarm Log Status Command . . . . . . . . . . . . . 49.39 Ether-Tca Alarm Log Status Command . . . . . . . . . . . . 49.40 Ether-Sfp Alarm Log Status Command . . . . . . . . . . . . . 49.41 Alarm Qos Slot Log Status Commands . . . . . . . . . . . . 49.42 Alarm Qos Queue Log Status Commands . . . . . . . . . . . 49.43 Log File Transfer Server Alarm Log Status Command . . . . 49.44 Log Lsm Redundancy Alarm Log Status Command . . . . . . 49.45 Log L2 Forward Alarm Log Status Command . . . . . . . . . 49.46 External Device Alarm Log Status Command . . . . . . . . . 49.47 Sync Clock Alarm Log Status Command . . . . . . . . . . . .
1010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50- Current Alarm Status Commands
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.1012 .1014 .1017 .1020 .1025 .1027 .1031 .1033 .1034 .1037 .1040 .1043 .1047 .1053 .1055 .1057 .1059 .1061 .1065 .1067 .1071 .1075 .1077 .1081 .1083 .1085 .1087 .1088 .1090 .1094 .1095 .1096 .1098 .1100 .1102 .1105 .1108 .1111 .1114 .1116 .1119 .1122 .1124 .1126 .1128 .1130 .1131
1134
50.1 Current Alarm Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1136 50.2 Alarm Current Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1138 50.3 Equipment Current Alarm Status Command . . . . . . . . . . . . . . . . . . . . . . . . .1142
3HH-08079-DDCA-TCZZA 01
Released
xi
Contents
50.4 Equipment Holder Current Alarm Status Command . . . . . . . . 50.5 Equipment Holder Extended Current Alarm Status Command . . . 50.6 Plug-in Unit Current Alarm Status Command . . . . . . . . . . . . 50.7 ATM Current Alarm Status Command . . . . . . . . . . . . . . . . 50.8 Ethernet Interface Current Alarm Status Command . . . . . . . . . 50.9 Software Management Current Alarm Status Command . . . . . . 50.10 xDSL Current Alarm Status Command . . . . . . . . . . . . . . . 50.11 TCA xDSL Current Alarm Status Command . . . . . . . . . . . . 50.12 Vectoring Line Current Alarm Status Command . . . . . . . . . . 50.13 Vectoring Board Current Alarm Status Command . . . . . . . . . 50.14 Electrical-to-Optical Conversion Current Alarm Status Command 50.15 Authentication Current Alarm Status Command . . . . . . . . . . 50.16 xDSL Bonding Current Alarm Status Command . . . . . . . . . . 50.17 Redundancy Current Alarm Status Command . . . . . . . . . . . 50.18 Custom Current Alarm Status Command . . . . . . . . . . . . . 50.19 SFP Current Alarm Status Command . . . . . . . . . . . . . . . 50.20 Custom External Current Alarm Status Command . . . . . . . . . 50.21 Plug In Unit Extended Current Alarm Status Command . . . . . . 50.22 Alarm Periodic Sealing Current Status Command . . . . . . . . . 50.23 SIP Server Current Alarm Status Command . . . . . . . . . . . . 50.24 SIP VSP Current Alarm Status Command . . . . . . . . . . . . . 50.25 SIP Dial Plan Current Alarm Status Command . . . . . . . . . . 50.26 SIP Slot Current Alarm Status Command . . . . . . . . . . . . . 50.27 SIP Termination Current Alarm Status Command . . . . . . . . . 50.28 Megaco Media Gateway Current Alarm Status Command . . . . 50.29 Megaco Signaling Gateway Current Alarm Status Command . . . 50.30 Megaco Plugin Unit Current Alarm Status Command . . . . . . . 50.31 Megaco Termination Current Alarm Status Command . . . . . . 50.32 Megaco Signaling Lt Current Alarm Status Command . . . . . . 50.33 Shdsl Current Alarm Status Command . . . . . . . . . . . . . . . 50.34 Shdsl Current Alarm Status Command . . . . . . . . . . . . . . . 50.35 Ima-Group Current Alarm Status Command . . . . . . . . . . . . 50.36 Ima-Link Current Alarm Status Command . . . . . . . . . . . . . 50.37 Alarm Current Ether-Tca Status Command . . . . . . . . . . . . 50.38 Alarm Current Ether-Sfp Status Command . . . . . . . . . . . . 50.39 Alarm Current Qos Slot Status Command . . . . . . . . . . . . . 50.40 Alarm Current Qos Queue Status Command . . . . . . . . . . . 50.41 Alarm File Transfer Server Status Command . . . . . . . . . . . 50.42 Alarm LSM Redundancy Status Command . . . . . . . . . . . . 50.43 Alarm L2 Forward Status Command . . . . . . . . . . . . . . . . 50.44 Alarm Current External Device Status Command . . . . . . . . . 50.45 Sync Clock Current Alarm Status Command . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
51.1 Alarm Snap-shot Status Command Tree . . . . . . . . . . . . . . . . . 51.2 Alarm Snapshot Status Command . . . . . . . . . . . . . . . . . . . . . 51.3 Alarm Snapshot Equipment Status Command . . . . . . . . . . . . . . 51.4 Equipment Holder Alarm Log Status Command . . . . . . . . . . . . . . 51.5 Equipment Holder Alarm Extended Log Status Command . . . . . . . . 51.6 Plug-in Unit Alarm Log Status Command . . . . . . . . . . . . . . . . . 51.7 ATM Alarm Log Status Command . . . . . . . . . . . . . . . . . . . . . 51.8 Alarm Snapshot Ethernet Interface Status Command . . . . . . . . . . 51.9 Alarm Snapshot Software Management Status Command . . . . . . . . 51.10 Alarm xDSL Snapshot Status Command . . . . . . . . . . . . . . . . . 51.11 TCA xDSL Alarm Log Status Command . . . . . . . . . . . . . . . . . 51.12 Alarm Vectoring Line Snapshot Status Command . . . . . . . . . . . . 51.13 Alarm Vectoring Board Snapshot Status Command . . . . . . . . . . . 51.14 Alarm Electrical-to-Optical Conversion for Snapshot Status Command 51.15 Authentication Alarms for Snapshot Status Command . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
51- Alarm Snap-shot Status Commands
xii
Released
.1144 .1147 .1149 .1152 .1154 .1155 .1157 .1161 .1165 .1167 .1169 .1171 .1172 .1175 .1176 .1179 .1183 .1185 .1188 .1190 .1191 .1193 .1194 .1196 .1199 .1200 .1201 .1203 .1205 .1207 .1209 .1211 .1213 .1215 .1217 .1219 .1221 .1223 .1224 .1226 .1228 .1229
1231
3HH-08079-DDCA-TCZZA
.1233 .1235 .1239 .1241 .1244 .1246 .1249 .1251 .1252 .1254 .1258 .1262 .1264 .1266 .1267
01
Contents
51.16 Alarm xDSL Bonding Snap Shot Status Command . . . . . . . 51.17 Alarm Redundancy Snapshot Status Command . . . . . . . . . 51.18 Alarm Custom Snapshot Status Command . . . . . . . . . . . 51.19 Alarm SFP Snapshot Status Command . . . . . . . . . . . . . 51.20 Alarm Custom External Snap Shot Status Command . . . . . . 51.21 Alarm Plug In Unit Extended Snap Shot Status Command . . . 51.22 Alarm Periodic Sealing Current Status Command . . . . . . . . 51.23 Alarm Snap-shot SIP Server Status Command . . . . . . . . . 51.24 Alarm Snap-shot SIP VSP Status Command . . . . . . . . . . 51.25 Alarm Snap-shot SIP Dial Plan Status Command . . . . . . . . 51.26 Alarm Snap-shot SIP Slot Status Command . . . . . . . . . . . 51.27 Alarm Snap-shot SIP Termination Status Command . . . . . . 51.28 Alarm Snap-shot Megaco Media Gateway Status Command . . 51.29 Alarm Snap-shot Megaco Signaling Gateway Status Command 51.30 Alarm Snap-shot Megaco Plug Unit Status Command . . . . . 51.31 Alarm Snap-shot Megaco Termination Status Command . . . . 51.32 Alarm Snap-shot Megaco Signaling Lt Status Command . . . . 51.33 Alarm Snap-shot Shdsl Status Command . . . . . . . . . . . . 51.34 Alarm Snap-shot Shdsl Status Command . . . . . . . . . . . . 51.35 Alarm Snap-shot Ima-Group Status Command . . . . . . . . . 51.36 Alarm Snap-shot Ima-Link Status Command . . . . . . . . . . 51.37 Alarm Snap-shot Ether-Tca Status Command . . . . . . . . . . 51.38 Alarm Snap-shot Ether-Sfp Status Command . . . . . . . . . . 51.39 Alarm Snap-shot SIP Termination Status Command . . . . . . 51.40 Alarm Snap-shot SIP Termination Status Command . . . . . . 51.41 Alarm File Transfer Server Status Command . . . . . . . . . . 51.42 Alarm Lsm Redundancy Status Command . . . . . . . . . . . . 51.43 Alarm L2 Forward Status Command . . . . . . . . . . . . . . . 51.44 Alarm Snap-shot External Device Status Command . . . . . . 51.45 Sync Clock Alarm SnapShot Status Command . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52- Alarm Delta Log Status Commands 52.1 Alarm Delta Log Status Command Tree . . . . . . 52.2 Alarm Generic Delta Alarm Log Status Command 52.3 Indeterminate Alarm Delta Log Status Command . 52.4 Warning Alarm Delta Log Status Command . . . . 52.5 Minor Alarm Delta Log Status Command . . . . . 52.6 Major Alarm Delta Log Status Command . . . . . 52.7 Critical Alarm Delta Log Status Command . . . .
.1268 .1271 .1272 .1275 .1279 .1281 .1284 .1286 .1287 .1289 .1290 .1291 .1294 .1295 .1296 .1297 .1299 .1301 .1303 .1305 .1307 .1309 .1311 .1313 .1315 .1317 .1318 .1320 .1322 .1323
1325 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
53- SHub Alarm Status Command 53.1 SHub Alarm Status Command Tree . . . . . . . . . . . . . . 53.2 SHub Alarm Snapshot Status Command . . . . . . . . . . . 53.3 SHub Alarm Equipment Snap-shot Status Command . . . . 53.4 SHub Alarm Snapshot Ethernet Interface Status Command . 53.5 SHub Alarm RIP Snapshot Status Command . . . . . . . . . 53.6 SHub Alarm OSPF Snap-shot Status Command . . . . . . . 53.7 SHub Alarm Uplink Group Snapshot Status Command . . . . 53.8 SHub Alarm Forwarding Snapshot Status Command . . . . . 53.9 SHub Alarm Global RIP Snapshot Status Command . . . . . 53.10 SHub Alarm Global OSPF Snapshot Status Command . . . 53.11 SHub Alarm Global Forwarding Snapshot Status Command 53.12 SHub Alarm Delta Log Changes Status Command . . . . .
.1326 .1327 .1329 .1343 .1357 .1371 .1385
1399 . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
54- ATM Status Commands
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
.1400 .1401 .1403 .1405 .1407 .1409 .1411 .1412 .1414 .1415 .1417 .1418
1419
54.1 ATM Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1420 54.2 ATM Interface Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1421 54.3 PVC Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1423
3HH-08079-DDCA-TCZZA 01
Released
xiii
Contents
54.4 TC Adapter Protocol Interval Status Command . . . . . . . . . . . . . . . . . . . 54.5 TC Adapter Protocol Current Quarter Performance Data Command . . . . . . . . 54.6 TC Adapter Protocol Current Day Performance Data Command . . . . . . . . . . 54.7 TC Adapter Protocol Performance Data for Previous Quarter Intervals Command 54.8 TC Adapter Protocol Performance Data for Previous Day Intervals Command . .
. . . . .
. . . . .
. . . . .
. . . . .
55- Bridge Status Commands
.1425 .1427 .1429 .1431 .1433
1435
55.1 Bridge Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1436 55.2 SHub Bridge Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1437 55.3 SHub Bridge Port Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1438
56- VLAN Status Commands
1442
56.1 VLAN Status Command Tree . . . . . . . . . . . . . . . . . . . . . . 56.2 Global VLAN Status Command . . . . . . . . . . . . . . . . . . . . . 56.3 Residential Bridge VLAN Summary Status Command . . . . . . . . . 56.4 Residential Bridge VLAN Extensive Status Command . . . . . . . . . 56.5 Cross-connect VLAN Status Command . . . . . . . . . . . . . . . . . 56.6 Stacked VLAN Status Command . . . . . . . . . . . . . . . . . . . . 56.7 Stacked QoS VLAN Status Command . . . . . . . . . . . . . . . . . . 56.8 QoS C-VLAN Status Command . . . . . . . . . . . . . . . . . . . . . 56.9 Layer-2 Terminated VLAN Status Command . . . . . . . . . . . . . . 56.10 VLAN Name Mapping Status Command . . . . . . . . . . . . . . . . 56.11 VLAN Filtering Database Per LIM Status Command . . . . . . . . . 56.12 Bridge Port Filtering Database Status Command . . . . . . . . . . . 56.13 VLAN Priority Regeneration Profile Status Command . . . . . . . . . 56.14 Duplicate MAC Alarm Status Command . . . . . . . . . . . . . . . . 56.15 Port Event Status Command . . . . . . . . . . . . . . . . . . . . . . 56.16 Port Statistics for Current Quarter Status Command . . . . . . . . . 56.17 Port Statistics for Current Day Status Command . . . . . . . . . . . 56.18 Port Statistics for Previous Quarter Intervals Status Command . . . . 56.19 Port Statistics for Previous Day Intervals Status Command . . . . . . 56.20 VLAN Port Statistics for Current Quarter Status Command . . . . . . 56.21 VLAN Port Statistics for Current Day Status Command . . . . . . . . 56.22 VLAN Port Statistics for Previous Quarter Intervals Status Command 56.23 VLAN Port Statistics for Previous Day Intervals Status Command . . 56.24 SHub Port VLAN Association Status Command . . . . . . . . . . . . 56.25 SHub VLAN Name Mapping Status Command . . . . . . . . . . . . 56.26 SHub VLAN Filtering Database Status Command . . . . . . . . . . . 56.27 SHub Filtering Database Entry Status Command . . . . . . . . . . . 56.28 SHub Duplicate MAC Alarm Status Command . . . . . . . . . . . . 56.29 SHub Number Of Active Multicast Entries Status Command . . . . . 56.30 VLAN Filtering Database Status Command . . . . . . . . . . . . . . 56.31 P-bit Traffic Counters Status Command . . . . . . . . . . . . . . . . 56.32 Current VLAN Filtering Database Status Command . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
57- Link Aggregation Status Commands
1520
57.1 Link Aggregation Status Command Tree . . . . 57.2 Link Aggregation Group Status Command . . . 57.3 Link Aggregation Member List Status Command 57.4 Link Aggregate Member Link Status Command .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
58- QOS Status Commands 58.1 QOS Status Command Tree . . . . . . 58.2 QoS Session Profile Status Command 58.3 QoS Marker Profile Status Command . 58.4 QoS Policer Profile Status Command . 58.5 QoS Queue Profile Status Command .
xiv
Released
.1443 .1445 .1446 .1448 .1452 .1456 .1458 .1460 .1461 .1463 .1464 .1467 .1470 .1473 .1476 .1478 .1481 .1484 .1487 .1490 .1493 .1496 .1499 .1502 .1504 .1505 .1507 .1509 .1511 .1512 .1515 .1518
.1521 .1522 .1527 .1529
1536 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
3HH-08079-DDCA-TCZZA
.1537 .1539 .1540 .1541 .1542
01
Contents
58.6 QoS Scheduler Node Profile Status Command . . . . . . . . . . . 58.7 QoS CAC Profile Status Command . . . . . . . . . . . . . . . . . 58.8 QoS Policy Profile Status Command . . . . . . . . . . . . . . . . 58.9 QoS L2 Filter Profile Status Command . . . . . . . . . . . . . . . 58.10 QoS L3 Filter Profile Status Command . . . . . . . . . . . . . . . 58.11 QoS Policy Action Profile Status Command . . . . . . . . . . . . 58.12 QoS IngressQoS Profile Status Command . . . . . . . . . . . . . 58.13 QoS Shaper Profile Status Command . . . . . . . . . . . . . . . 58.14 QoS Bandwidth Profile Status Command . . . . . . . . . . . . . 58.15 QoS DSL Bandwidth Status Command . . . . . . . . . . . . . . 58.16 QoS Shdsl Bandwidth Status Command . . . . . . . . . . . . . . 58.17 QoS Ethernet Bandwidth Status Command . . . . . . . . . . . . 58.18 QoS Interface Bandwidth Status Command . . . . . . . . . . . . 58.19 QoS Total Buffer Overflow Statistics for Previous Quarter . . . . 58.20 QoS Total Buffer Overflow Statistics for Current Quarter . . . . . 58.21 QoS Total Buffer Overflow Statistics for Previous Day Command 58.22 QoS Total Buffer Overflow Statistics for Current Day . . . . . . . 58.23 QoS Total Buffer Overflow Statistics Total Status Command . . . 58.24 QoS Interface Buffer Overflow Statistics for Previous Quarter . . 58.25 QoS Interface Buffer Overflow Statistics for Current Quarter . . . 58.26 QoS Fan Out Statistics for Previous Quarter . . . . . . . . . . . . 58.27 QoS Fan Out Statistics for Current 15 minutes . . . . . . . . . . 58.28 QoS Fan Out Statistics for Previous Day . . . . . . . . . . . . . . 58.29 QoS Fan Out Statistics for Current Day . . . . . . . . . . . . . . 58.30 QoS LT Queue Overflow Statistics for Previous Quarter . . . . . 58.31 QoS LT Queue Overflow Statistics for current Quarter . . . . . . 58.32 QoS SHub Meter Statistics Status Command . . . . . . . . . . . 58.33 QoS SHub Flow Statistics Status Command . . . . . . . . . . . . 58.34 QoS TC2QMapping Status Command . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
59- IP Status Commands
1599
59.1 IP Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 59.2 IP VRF Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.3 IP Interface Status Command . . . . . . . . . . . . . . . . . . . . . . . . 59.4 IP VRF Interface User Port Status Command . . . . . . . . . . . . . . . . 59.5 IP VRF Interface User Port Status Command . . . . . . . . . . . . . . . . 59.6 IP VRF Routes Status Command . . . . . . . . . . . . . . . . . . . . . . 59.7 IP VRF Net-to-Media Statistics Command . . . . . . . . . . . . . . . . . . 59.8 IP VRF Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.9 IP VRF Next Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59.10 IP SHub VRF Status Command . . . . . . . . . . . . . . . . . . . . . . 59.11 IP SHub VRF Route Status Command . . . . . . . . . . . . . . . . . . . 59.12 IP SHub ARP Statistics Command . . . . . . . . . . . . . . . . . . . . . 59.13 IP SHub VRF Media Status Command . . . . . . . . . . . . . . . . . . . 59.14 IP SHub VRF Routing Status Command . . . . . . . . . . . . . . . . . . 59.15 IP DHCP Session Status Command . . . . . . . . . . . . . . . . . . . . 59.16 IP User Port ARP Proxy Statistics Status Command . . . . . . . . . . . 59.17 IP Untagged User Port ARP Proxy Statistics Status Command . . . . . 59.18 IP Untagged User Port ARP Proxy Summary Statistics Status Command 59.19 IP Untagged User Port ARP Proxy Detailed Statistics Status Command . 59.20 IP Tagged User Port ARP Proxy Statistics Status Command . . . . . . . 59.21 IP Tagged User Port ARP Proxy Summary Statistics Status Command . 59.22 IP Tagged User Port ARP Proxy Detailed Statistics Status Command . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
60- ARP-RELAY Status Commands 60.1 ARP-RELAY Status Command Tree . . . . . . . . 60.2 ARP-RELAY statistics Status Command . . . . . 60.3 ARP-RELAY summary statistics Status Command 60.4 ARP-RELAY detailed statistics Status Command .
3HH-08079-DDCA-TCZZA 01
.1543 .1544 .1545 .1546 .1547 .1548 .1549 .1550 .1551 .1552 .1554 .1556 .1558 .1561 .1564 .1567 .1570 .1573 .1577 .1580 .1583 .1585 .1587 .1589 .1591 .1593 .1595 .1596 .1597
.1600 .1602 .1603 .1607 .1610 .1612 .1616 .1618 .1619 .1620 .1622 .1624 .1627 .1629 .1630 .1633 .1634 .1635 .1637 .1640 .1642 .1644
1647 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
Released
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
.1648 .1649 .1651 .1653
xv
Contents
61- xDSL Status Commands
1656
61.1 xDSL Status Command Tree . . . . . . . . . . . . . . . . . . 61.2 xDSL Profiles Status Command . . . . . . . . . . . . . . . . 61.3 xDSL PM Interval Per Interface Status Command . . . . . . 61.4 xDSL Operational Data Near End Line Status Command . . 61.5 xDSL Operational Data Near End Channel Status Command 61.6 xDSL Operational Data Far End Line Status Command . . . 61.7 xDSL Operational Data Far End Channel Status Command . 61.8 xDSL Operational Data Statistics . . . . . . . . . . . . . . . 61.9 xDSL Carrier Data Near End Status Command . . . . . . . . 61.10 xDSL Carrier Data Far End Status Command . . . . . . . . 61.11 xDSL Failure Status Near End Status Command . . . . . . 61.12 xDSL Failure Status Far End Status Command . . . . . . . 61.13 xDSL Vectored Line Failure Status Command . . . . . . . . 61.14 xDSL Vectoring Board Failure Status Command . . . . . . 61.15 xDSL Counters Near End Line Current 15 Min . . . . . . . 61.16 xDSL Counters Near End Line Current Day . . . . . . . . . 61.17 xDSL Counters Near End Line Previous 15 Min . . . . . . . 61.18 xDSL Counters Near End Of Line Previous Day . . . . . . . 61.19 xDSL Counters Near End Channel Current 15 Min . . . . . 61.20 xDSL Counters Near End Channel Current Day . . . . . . . 61.21 xDSL Counters Near End Channel Previous 15 Min . . . . 61.22 xDSL Counters Near End Channel Previous Day . . . . . . 61.23 xDSL Counters Far End Line Current 15 Min . . . . . . . . 61.24 xDSL Counters Far End Line Current Day . . . . . . . . . . 61.25 xDSL Counters Far End Line Previous 15 Min . . . . . . . . 61.26 xDSL Counters Far End Line Previous Day . . . . . . . . . 61.27 xDSL Counters Far End Channel Current 15 Min . . . . . . 61.28 xDSL Counters Far End Channel Current Day . . . . . . . . 61.29 xDSL Counters Far End Channel Previous 15 Min . . . . . 61.30 xDSL Counters Far End Channel Previous Day . . . . . . . 61.31 xDSL Inventory XT/RT Status Command . . . . . . . . . . 61.32 xDSL Inventory XT/RT Status Command . . . . . . . . . . 61.33 xDSL Board Capability Status Command . . . . . . . . . . 61.34 xDSL Low Rate Alarm Timestamp Command . . . . . . . . 61.35 xDSL Low Rate Alarm Line Bitmap Status Command . . . . 61.36 xDSL Low Rate Alarm Linkup Record Data Command . . . 61.37 xDSL INS Near End Operational Data Status Command . . 61.38 xDSL INS Near End Current 15Min Data Status Command . 61.39 xDSL INS Near End Current 15Min IAT Histogram . . . . . 61.40 xDSL INS Near End Current 15Min EINP Histogram . . . . 61.41 xDSL INS Near End Current Day Data Status Command . . 61.42 xDSL INS Near End Current Day IAT Histogram . . . . . . 61.43 xDSL INS Near End Current Day EINP Histogram . . . . . 61.44 xDSL INS Near End Previous 15Min Data Status Command 61.45 xDSL INS Near End Previous 15Min IAT Histogram . . . . 61.46 xDSL INS Near End Previous 15Min EINP Histogram . . . 61.47 xDSL INS Near End Previous Day Data Status Command . 61.48 xDSL INS Near End Previous Day IAT Histogram . . . . . . 61.49 xDSL INS Near End Previous Day EINP Histogram . . . . . 61.50 xDSL INS Far End Operational Data Status Command . . . 61.51 xDSL INS Far End Current 15Min Data Status Command . 61.52 xDSL INS Far End Current 15Min IAT Histogram . . . . . . 61.53 xDSL INS Far End Current 15Min EINP Histogram . . . . . 61.54 xDSL INS Far End Current Day Data Status Command . . . 61.55 xDSL INS Far End Current Day IAT Histogram . . . . . . . 61.56 xDSL INS Far End Current Day EINP Histogram . . . . . . 61.57 xDSL INS Far End Previous 15Min Data Status Command .
xvi
Released
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3HH-08079-DDCA-TCZZA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.1658 .1661 .1663 .1665 .1674 .1676 .1683 .1685 .1689 .1694 .1697 .1700 .1703 .1705 .1707 .1709 .1711 .1714 .1717 .1719 .1721 .1723 .1725 .1727 .1729 .1731 .1733 .1735 .1737 .1739 .1741 .1743 .1745 .1751 .1752 .1753 .1756 .1758 .1759 .1760 .1761 .1762 .1763 .1764 .1765 .1766 .1767 .1768 .1769 .1770 .1772 .1773 .1774 .1775 .1776 .1777 .1778
01
Contents
61.58 xDSL INS Far End Previous 15Min IAT Histogram . . . . 61.59 xDSL INS Far End Previous 15Min EINP Histogram . . . 61.60 xDSL INS Far End Previous Day Status Command . . . . 61.61 xDSL INS Far End Previous Day IAT Histogram . . . . . 61.62 xDSL INS Far End Previous Day EINP Histogram . . . . . 61.63 xDSL Vectoring Disturbers Status Command . . . . . . . 61.64 xDSL Vectoring Carrier Data Near End Status Command 61.65 xDSL Vectoring Carrier Data Far End Status Command . 61.66 xDSL Vectoring Processing Board Status Command . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
62- Configuration Data Status Commands
1794
62.1 Configuration Data Status Command Tree . . . . . . . . 62.2 xDSL Port Configuration Status Command . . . . . . . . 62.3 xDSL Port ATM Configuration Status Command . . . . . 62.4 xDSL Port ATM Interface Configuration Status Command 62.5 xDSL Port Interface Configuration Status Command . . . 62.6 xDSL IGMP Configuration Status Command . . . . . . . 62.7 xDSL Security PAE Configuration Status Command . . . 62.8 xDSL BridgePort Configuration Status Command . . . . 62.9 xDSL QoS Configuration Status Command . . . . . . . . 62.10 xDSL PPPoX Relay Configuration Status Command . . 62.11 xDSL Bonding Group Configuration Status Command .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
63- Operational Data Status Commands . . . . . . . .
. . . . . . . .
. . . . . . . .
64- xDSL Bonding Status Commands
.1825 .1826 .1830 .1832 .1834 .1836 .1839 .1841
1843
64.1 xDSL Bonding Status Command Tree . . . . . . . . . . . . . 64.2 xDSL Bonding Profiles Status Command . . . . . . . . . . . 64.3 xDSL Bonding Near End Operational Data Status Command 64.4 xDSL Bonding Far End Operational Data Status Command . 64.5 xDSL Bonding Group Operational Data Command . . . . . . 64.6 xDSL Bonding Link Operational Data Command . . . . . . . 64.7 xDSL Bonding Near End Failure Status Command . . . . . . 64.8 xDSL Bonding Far End Failure Status Command . . . . . . . 64.9 xDSL Bonding Group Failure Status Command . . . . . . . . 64.10 xDSL Bonding Group Summary Info Command . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
65- Interface Status Commands
3HH-08079-DDCA-TCZZA 01
.1795 .1797 .1803 .1805 .1807 .1809 .1811 .1814 .1818 .1820 .1822
1824
63.1 Operational Data Status Command Tree . . . . . . 63.2 xDSL Port Operational Status Command . . . . . . 63.3 xDSL BridgePort Operational Status Command . . 63.4 xDSL Port ATM Operational Status Command . . . 63.5 xDSL Port Interface Configuration Status Command 63.6 xDSL IGMP Operational Status Command . . . . . 63.7 xDSL Port Ip Bridge Operational Status Command . 63.8 xDSL QoS Opertaional Status Command . . . . . .
65.1 Interface Status Command Tree . . . . . . . . 65.2 Interface Alarm Status Command . . . . . . . 65.3 Physical Interface Status Command . . . . . . 65.4 Interface Status Command . . . . . . . . . . . 65.5 Interface Test Status Command . . . . . . . . 65.6 Interface Stack Status Command . . . . . . . 65.7 SHub Interface Status Command . . . . . . . 65.8 SHub Interface Port Control Status Command 65.9 SHub Interface Uplink Group Status Command 65.10 Interface Statistics Commands . . . . . . . . 65.11 Interface Extensive Status Command . . . .
.1779 .1780 .1781 .1782 .1783 .1784 .1786 .1789 .1792
.1844 .1845 .1846 .1848 .1850 .1852 .1854 .1856 .1858 .1860
1861 . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
Released
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
.1862 .1863 .1865 .1866 .1874 .1879 .1886 .1888 .1891 .1892 .1895
xvii
Contents
66- SNTP Status Commands
1897
66.1 SNTP Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1898 66.2 SNTP Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1899
67- SNTP Server Commands
1900
67.1 SNTP Server Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1901 67.2 SNTP Server Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1902
68- System Status Commands
1903
68.1 System Status Command Tree . . . . . . . . 68.2 SHub System Version Status Command . . . 68.3 SHub System HTTP Status Command . . . . 68.4 SHub System Common Status Command . . . 68.5 SHub System Control Status Command . . . . 68.6 SHub IP Filter Status Command . . . . . . . . 68.7 System Statistics Command . . . . . . . . . . 68.8 System Licenses Status Command . . . . . . 68.9 System Clock Status Command . . . . . . . . 68.10 Show syslog parameters . . . . . . . . . . . 68.11 System Memory Usage Status Command . . 68.12 System CPU Load Status Command . . . . . 68.13 System CDE Command . . . . . . . . . . . . 68.14 System Clock Management Status Command
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
69- PCCP Status Commands
.1904 .1905 .1906 .1907 .1908 .1910 .1915 .1916 .1919 .1921 .1922 .1924 .1926 .1927
1930
69.1 PCCP Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1931 69.2 SHub PCCP Group Entry Status Command . . . . . . . . . . . . . . . . . . . . . . . . . .1932 69.3 SHub PCCP Group Port Entry Status Command . . . . . . . . . . . . . . . . . . . . . . .1933
70- Transaction Status Commands
1935
70.1 Transaction Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1936 70.2 Transaction Log Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1937 70.3 Transaction Log Entry Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . .1939
71- Error Status Command
1940
71.1 Error Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1941 71.2 Error Log Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1942
72- Software Status Commands 72.1 Software Status Command Tree . . . . . . . 72.2 Database Status Command . . . . . . . . . 72.3 Disk Status Command . . . . . . . . . . . . 72.4 Overall Software Package Status Command 72.5 Software Package Status Command . . . . 72.6 File Status Command . . . . . . . . . . . . . 72.7 Upload/Download Status Command . . . . . 72.8 Software Version For ANSI Status Command 72.9 Software Version For ETSI Status Command
1944 . . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
73- SHub Software Management Status Command
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
.1945 .1946 .1948 .1950 .1953 .1955 .1957 .1960 .1961
1962
73.1 SHub Software Management Status Command Tree . . . . . . . . . . . . . . . . . . . . .1963 73.2 SHub Configuration File Status Command . . . . . . . . . . . . . . . . . . . . . . . . . .1964 73.3 Status of the SHub Boot ROM Update Command . . . . . . . . . . . . . . . . . . . . . .1966
xviii
Released
3HH-08079-DDCA-TCZZA
01
Contents
74- CDE Status Commands
1967
74.1 CDE Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1968 74.2 CDE download Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1969
75- IGMP Status Commands
1971
75.1 IGMP Status Command Tree . . . . . . . . . . . . . . 75.2 IGMP System Status Command . . . . . . . . . . . . . 75.3 IGMP Channel Sources Status Command . . . . . . . 75.4 IGMP Channel Miscellaneous Status Command . . . . 75.5 IGMP Channel Protocol Status Command . . . . . . . 75.6 IGMP package to multicast source Command . . . . . 75.7 IGMP Group to Package Status Command . . . . . . . 75.8 Show Multicast Source Statistics Command . . . . . . 75.9 Show Multicast Channel Statistics Command . . . . . . 75.10 IGMP Module Counter Status Command . . . . . . . 75.11 IGMP Module Time Status Command . . . . . . . . . 75.12 IGMP Module Miscellaneous Status Command . . . . 75.13 IGMP System Status Command . . . . . . . . . . . . 75.14 SHub IGMP VLAN Router Port Status Command . . . 75.15 Shub IGMP System Status Command . . . . . . . . . 75.16 Shub IGMP CAC System Status Command . . . . . . 75.17 Shub IGMP CAC Multicast Sources Status Command 75.18 Shub IGMP CAC Bundle Status Command . . . . . . 75.19 Shub IGMP CAC Bundle to Source Command . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
76- Transport Status Commands 76.1 Transport Status Command Tree . . . 76.2 ICMP Status Command . . . . . . . . 76.3 IP Address Status Command . . . . . 76.4 IP Statistics . . . . . . . . . . . . . . . 76.5 IP Route Status Command . . . . . . . 76.6 IP Net-to-media Status Command . . . 76.7 SNMP Protocol Statistics Command . . 76.8 SNMP Engine Status Command . . . . 76.9 System Status Command . . . . . . . 76.10 UDP Status Command . . . . . . . . 76.11 UDP Listener Status Command . . . 76.12 Ethernet Dot3 Status Command . . . 76.13 Interface MAU Status Command . . . 76.14 SFP status commands . . . . . . . . 76.15 SHub Ethernet Dot3 Status Command 76.16 SHub Dot3 Control Status Command 76.17 SHub Dot3 Pause Status Command . 76.18 SHub Ethernet Dot3 Status Command 76.19 SHub L2 Filter Status Command . . . 76.20 SHub Rate Status Command . . . . . 76.21 Interface MAU Status Command . . . 76.22 Ethernet Lt Dot3 Status Command . .
2010 . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
77- Efm Oam Status Commands 77.1 Efm Oam Status Command Tree . . . . . . . 77.2 Efm Oam Mac Statistics Command . . . . . . 77.3 Efm Oam Pme Statistics Command . . . . . . 77.4 Efm Oam Local Information Status Command 77.5 Efm Oam Peer Information Status Command . 77.6 Efm Oam statistics Status Command . . . . .
3HH-08079-DDCA-TCZZA 01
.1972 .1974 .1976 .1979 .1982 .1985 .1986 .1987 .1989 .1991 .1994 .1996 .1998 .1999 .2001 .2003 .2005 .2007 .2009
.2011 .2013 .2016 .2018 .2021 .2023 .2024 .2027 .2028 .2029 .2030 .2031 .2035 .2038 .2040 .2041 .2043 .2045 .2049 .2051 .2053 .2057
2059 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
Released
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
.2060 .2061 .2064 .2066 .2068 .2070
xix
Contents
78- DHCP Relay Status Commands
2072
78.1 DHCP Relay Status Command Tree . . . . . . . . . . . . . . . . . . 78.2 DHCP Relay Port Statistics . . . . . . . . . . . . . . . . . . . . . . . 78.3 DHCP Relay Port Statistics Related To Untagged Frames . . . . . . 78.4 DHCP Relay Port Summary Statistics Related To Untagged Frames 78.5 DHCP Relay Port Detailed Statistics Related To Untagged Frames . 78.6 DHCP Relay Port Statistics Related To Vlan Ports . . . . . . . . . . 78.7 DHCP Relay Port Summary Statistics Related To Vlan Ports . . . . 78.8 DHCP Relay Port Detailed Statistics Related To Vlan Ports . . . . . 78.9 DHCP v6 Relay Port Statistics . . . . . . . . . . . . . . . . . . . . . 78.10 DHCP v6 Relay Port Statistics Related To Vlan Ports . . . . . . . . 78.11 DHCP v6 Relay Port Summary Statistics Related To Vlan Ports . . 78.12 DHCP v6 Relay Port Detailed Statistics Related To Vlan Ports . . . 78.13 SHub DHCP Relay Statistics . . . . . . . . . . . . . . . . . . . . . 78.14 DHCP Relay Session Status Command . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
79- IPv6 Users Status Commands
.2073 .2074 .2076 .2078 .2080 .2087 .2089 .2091 .2098 .2100 .2102 .2104 .2108 .2111
2115
79.1 IPv6 Users Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2116 79.2 IPv6 Users Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2117
80- Multicast Status Commands
2120
80.1 Multicast Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . 80.2 Multicast Active Groups Status Command . . . . . . . . . . . . . . . . . 80.3 Multicast Group Membership Status Command . . . . . . . . . . . . . . . 80.4 Dynamic and Static-Dynamic Multicast VLAN FWD Port Status Command 80.5 SHub Multicast Status Command . . . . . . . . . . . . . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
81- CPE Management Status Commands
.2121 .2122 .2125 .2128 .2130
2131
81.1 CPE Management Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . .2132 81.2 CPE Management Show Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2133
82- Session Status Commands
2134
82.1 Session Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2135 82.2 Session Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2136
83- PPPoX-Relay Status Commands
2138
83.1 PPPoX-Relay Status Command Tree . . . . . . . 83.2 PPPoX CC Engine Statistics . . . . . . . . . . . . 83.3 PPPoX CC Client Port Statistics . . . . . . . . . . 83.4 PPPoX CC Engine Monitor Statistics . . . . . . . 83.5 PPPoX CC Client Port Monitor Statistics . . . . . 83.6 PPPoX CC Session Engine Status Command . . 83.7 PPPoX CC Session Client Port Status Command
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
84- OSPF Status Commands 84.1 OSPF Status Command Tree . . . . . . . . . 84.2 OSPF Area Status Command . . . . . . . . . 84.3 OSPF LSA Status Command . . . . . . . . . 84.4 OSPF External Link State Status Command . 84.5 OSPF Interface Status Command . . . . . . . 84.6 OSPF Neighbor Status Command . . . . . . . 84.7 OSPF Routing Status Command . . . . . . . . 84.8 OSPF Redistributed Routing Status Command 84.9 OSPF Statistics . . . . . . . . . . . . . . . . .
xx
Released
.2139 .2140 .2142 .2145 .2147 .2150 .2153
2156 . . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
3HH-08079-DDCA-TCZZA
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
.2157 .2158 .2160 .2162 .2164 .2167 .2169 .2171 .2173
01
Contents
84.10 OSPF Parameter Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2174
85- RIP Status Commands 85.1 RIP Status Command Tree . . 85.2 RIP Statistics Command . . . 85.3 RIP Peer Status Command . 85.4 RIP Routing Status Command 85.5 RIP Global Status Command .
2176 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
86- Cluster Status Commands 86.1 Cluster Status Command Tree . . . . . 86.2 Cluster Port Counter Status Command 86.3 Neighbor Device Status Command . . 86.4 Topology Device Status Command . . 86.5 Topology Connect Status Command .
2184 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
87- SHDSL Status Commands . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
88- IMA Status Commands
.2195 .2197 .2199 .2206 .2208 .2213 .2216 .2219 .2222 .2225 .2227 .2229 .2231
2233
88.1 IMA Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 88.2 IMA Group Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . 88.3 IMA Group Near-End Current Interval Performance Data Status Command 88.4 IMA Group Near-End Previous Interval Performance Data Status Command 88.5 IMA Group Far-End Current Interval Performance Data Status Command . 88.6 IMA Group Far-End Previous Interval Performance Data Status Command . 88.7 IMA Link Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 88.8 IMA Link Near-End Current Interval Performance Data Status Command . . 88.9 IMA Link Near-End Previous Interval Performance Data Status Command . 88.10 IMA Link Far-End Current Interval Performance Data Status Command . . 88.11 IMA Link Far-End Previous Interval Performance Data Status Command .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
89- Voice Status Commands 89.1 Voice Status Command Tree . . . . . . . . . . . . . . . . . . . . . . 89.2 Voice Sip Server Status Commands . . . . . . . . . . . . . . . . . . 89.3 Voice Sip User Agent Access Point Show Commands . . . . . . . . 89.4 Voice Sip Statistics System Status Command . . . . . . . . . . . . 89.5 Voice Sip Statistics Perfinfo Status Command . . . . . . . . . . . . 89.6 Voice Sip Termination Statistics Command for Current 15 Minutes . 89.7 Voice Sip Termination Statistics Command for Current Day . . . . . 89.8 Voice Sip Termination Statistics Command for Previous 15 Minutes 89.9 Voice Sip Termination Statistics Command for Previous day . . . . . 89.10 Voice Sip Call Statistics Command . . . . . . . . . . . . . . . . . . 89.11 Voice Sip board Statistics Command for Current one Day . . . . .
.2185 .2186 .2188 .2190 .2192
2194
87.1 SHDSL Status Command Tree . . . . . . . . . . . . . . . . . . . . . 87.2 SHDSL Inventory Status Command . . . . . . . . . . . . . . . . . . . 87.3 SHDSL Span Status Command . . . . . . . . . . . . . . . . . . . . . 87.4 SHDSL Unit Status Command . . . . . . . . . . . . . . . . . . . . . . 87.5 SHDSL Segment Status Command . . . . . . . . . . . . . . . . . . . 87.6 SHDSL Segment Counters Current Interval Status Command . . . . . 87.7 SHDSL Segment Counters Current Day Status Command . . . . . . . 87.8 SHDSL Segment Counters Previous Interval Status Command . . . . 87.9 SHDSL Segment Counters Previous Day Status Command . . . . . . 87.10 SHDSL Span Current Interval Performance Data Status Command . 87.11 SHDSL Span Current Day Performance Data Status Command . . . 87.12 SHDSL Span Previous Interval Performance Data Status Command 87.13 SHDSL Span Previous Day Performance Data Status Command . .
3HH-08079-DDCA-TCZZA 01
.2177 .2178 .2179 .2180 .2182
.2234 .2235 .2240 .2242 .2244 .2246 .2248 .2252 .2254 .2256 .2258
2260 . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
Released
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
.2261 .2263 .2264 .2266 .2267 .2269 .2272 .2275 .2278 .2281 .2283
xxi
Contents
89.12 Voice Sip Board Statistics Command for Previous day . . . . 89.13 Voice Sip Board Statistics Command for Current 15 Minutes . 89.14 Voice Sip Board Statistics Command for Previous 15 Minutes 89.15 Voice Sip Statistics Perfinfo Status Command per board . . . 89.16 Voice Sip restoration: Redundancy Status Commands . . . . 89.17 Voice Sip Redundancy Status Commands . . . . . . . . . . . 89.18 Voice Sip Termination Status Commands . . . . . . . . . . . 89.19 Voice Megaco Equipment Board Status Commands . . . . . 89.20 Voice Megaco Equipment Status Commands . . . . . . . . . 89.21 Voice Megaco MGI Status Commands . . . . . . . . . . . . . 89.22 Voice Megaco Database Status Commands . . . . . . . . . . 89.23 Voice Megaco IP Status Commands . . . . . . . . . . . . . . 89.24 Voice Megaco SGI Status Commands . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
90- L2CP Status Commands 90.1 L2CP Status Command Tree . . . 90.2 L2CP Status Command . . . . . 90.3 L2CP Status Command . . . . . 90.4 L2CP Status Command . . . . . 90.5 L2CP Partition Status Command .
.2286 .2289 .2292 .2295 .2297 .2299 .2300 .2302 .2304 .2307 .2309 .2310 .2311
2313 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
91- MSTP Status Commands 91.1 MSTP Status Command Tree . . . . . . . . 91.2 SHub MSTP Bridge Status Command . . . . 91.3 SHub MSTP Instance Status Command . . . 91.4 SHub MSTP Network Port Status Command 91.5 SHub MSTP Port Instance Status Command
.2314 .2315 .2317 .2319 .2320
2321 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
92- Ethernet Lt Configuration Data Status Commands 92.1 Ethernet Lt Configuration Data Status Command Tree . 92.2 Ethernet Port Interface Configuration Status Command 92.3 Ethernet IGMP Configuration Status Command . . . . . 92.4 Ethernet Security PAE Configuration Status Command 92.5 Ethernet BridgePort Configuration Status Command . . 92.6 Ethernet QoS Configuration Status Command . . . . .
2333
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
93- Ethernet Status Commands 93.1 Ethernet Status Command Tree . . . . . . . . . . . 93.2 Ethernet Counters Near End Line Current 15 Min . 93.3 Ethernet Counters Near End Line Current Day . . . 93.4 Ethernet Counters Near End Line Previous 15 Min . 93.5 Ethernet Counters Near End Line Previous Day . . 93.6 Ethernet PM Interval Per Interface Status Command 93.7 Ethernet Statistics Line Status Command . . . . . .
.2322 .2323 .2325 .2327 .2330
.2334 .2335 .2337 .2340 .2343 .2347
2349 . . . . . . .
. . . . . . .
94- Ethernet Lt Operational Data Status Commands 94.1 Ethernet Lt Operational Data Status Command Tree . 94.2 Ethernet Port Operational Status Command . . . . . 94.3 Ethernet BridgePort Operational Status Command . . 94.4 Ethernet Port Interface Operational Status Command 94.5 Ethernet IGMP Operational Status Command . . . . 94.6 Ethernet Port Ip Bridge Operational Status Command 94.7 Ethernet QoS Opertaional Status Command . . . . .
. . . . . . .
. . . . . . .
.2350 .2351 .2353 .2355 .2357 .2359 .2361
2364 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
95- Debug Status Commands
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
.2365 .2366 .2368 .2370 .2372 .2375 .2377
2379
95.1 Debug Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2380
xxii
Released
3HH-08079-DDCA-TCZZA
01
Contents
95.2 SW Error Log Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2381
96- Trouble-Shooting Status Commands
2382
96.1 Trouble-Shooting Status Command Tree . . . . . . . . . . . . . . . . . 96.2 Trouble-shooting Statistics To One Port . . . . . . . . . . . . . . . . . . 96.3 Trouble-shooting Statistics on a Port (DSL or Ethernet) or PVC Interface 96.4 Trouble-shooting Statistics To One VlanPort . . . . . . . . . . . . . . . 96.5 Summary Trouble-shooting Statistics To Vlan Ports . . . . . . . . . . . 96.6 Extensive Trouble-shooting Statistics To Vlan Ports . . . . . . . . . . . 96.7 Extensive Trouble-shooting ipv4-antispoofing Statistics To One UNI Port
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
97- CFM Status Commands
.2383 .2384 .2386 .2388 .2390 .2393 .2397
2399
97.1 CFM Status Command Tree . . . . . . . . . . . . . . . . . . 97.2 Maintenance Domain on NT Status Command . . . . . . . . 97.3 Maintenance Association on NT Status Command . . . . . . 97.4 Maintenance Association End Point on NT Status Command 97.5 CFM Stack on NT Status Command . . . . . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
98- IPoA/E IW Status Commands
.2400 .2401 .2403 .2405 .2407
2409
98.1 IPoA/E IW Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2410 98.2 IPoA/E IW Interworking Port Status Command . . . . . . . . . . . . . . . . . . . . . . . .2411
99- LineTest Status Commands
2413
99.1 LineTest Status Command Tree . . . . . . . . . . . . 99.2 Megaco LineTest Available Session Status Command 99.3 Megaco LineTest Session Status Command . . . . . 99.4 Megaco LineTest Line Status Command . . . . . . . 99.5 Megaco LineTest LineId ExtReport Status Command 99.6 SINGLE LineTest Available Session Status Command 99.7 SINGLE LineTest Session Status Command . . . . . 99.8 SINGLE LineTest Line Status Command . . . . . . . 99.9 SINGLE LineTest LineId ExtReport Status Command
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
100- LACP status commands 100.1 LACP status commands Tree . . . . . 100.2 LACP Port Status Command . . . . . 100.3 LACP Group Status Command . . . . 100.4 LACP Member Port Status Command
2440 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
101- MSTP Status Commands 101.1 MSTP Status Command Tree . . . . 101.2 MSTP Bridge Status Command . . . 101.3 MSTP Instance Status Command . . 101.4 MSTP Network Port Status Command 101.5 MSTP Port Instance Status Command
.2414 .2415 .2416 .2418 .2422 .2427 .2428 .2431 .2435
.2441 .2442 .2448 .2450
2452 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
102- IPv6 Users Status Commands
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
.2453 .2454 .2456 .2458 .2461
2464
102.1 IPv6 Users Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2465 102.2 IPv6 Users Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2466
103- Security Status Commands
2469
103.1 Security Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2470 103.2 Operator Information Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . .2472 103.3 Domain Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2474
3HH-08079-DDCA-TCZZA 01
Released
xxiii
Contents
103.4 User Sessions Status Command . . . . . . . . . . . . . . . 103.5 Connection Profile Status Command . . . . . . . . . . . . . 103.6 RADIUS Authentication Server Statistics Command . . . . 103.7 RADIUS Authentication Server Status Command . . . . . . 103.8 RADIUS Accounting Server Statistics Command . . . . . . 103.9 RADIUS Accounting Server Status Command . . . . . . . . 103.10 RADIUS Dynamic Authentication Client Status Command 103.11 RADIUS Next Available Index Command . . . . . . . . . . 103.12 RADIUS Client Status Command . . . . . . . . . . . . . . 103.13 PAE Authenticator Status Command . . . . . . . . . . . . 103.14 EAPOL Statistics Command . . . . . . . . . . . . . . . . . 103.15 Diagnostic Information Status Command . . . . . . . . . . 103.16 Session Statistics Command . . . . . . . . . . . . . . . . 103.17 PAE Port System Status Command . . . . . . . . . . . . . 103.18 MAC Address related EAPOL Status Command . . . . . . 103.19 SSH Server Status Command . . . . . . . . . . . . . . . . 103.20 PM File Upload Status Command . . . . . . . . . . . . . . 103.21 PM File Upload Status Command . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
104- Alarm Management Commands
.2475 .2481 .2482 .2485 .2486 .2488 .2489 .2491 .2492 .2493 .2496 .2499 .2504 .2507 .2509 .2511 .2512 .2513
2515
104.1 Alarm Management Command Tree . . . . . . . . . . . . . . 104.2 Alarm Management Command . . . . . . . . . . . . . . . . . 104.3 Snapshot Management Command . . . . . . . . . . . . . . . 104.4 SHub Snapshot Management Command . . . . . . . . . . . 104.5 Shub Ospf Clear management Command . . . . . . . . . . . 104.6 Alarm Delta Log Management Command . . . . . . . . . . . 104.7 Log Management Command . . . . . . . . . . . . . . . . . . 104.8 Alarm Filetransfer Manual Clearance Management Command
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
105- ATM Management Commands
.2516 .2517 .2518 .2519 .2520 .2521 .2522 .2523
2524
105.1 ATM Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2525 105.2 ATM Port Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2526
106- IGMP Management Commands 106.1 IGMP Management Command Tree . . . . . . . . . 106.2 IGMP Management Command . . . . . . . . . . . . 106.3 IGMP Multicast Sources Management Command . . 106.4 IGMP Multicast Channel Management Command . . 106.5 IGMP Multicast Channel Management Command . . 106.6 IGMP Slot Management Command . . . . . . . . . 106.7 Shub IGMP CAC Bundle Management Command . 106.8 Shub IGMP CAC Source Management Command . 106.9 Shub IGMP CAC System Management Command . 106.10 Shub IGMP VLAN System Management Command 106.11 IGMP Channel Management Command . . . . . .
2528 . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
107- PPPoX Management Commands
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
.2529 .2530 .2531 .2532 .2533 .2535 .2536 .2537 .2538 .2539 .2540
2542
107.1 PPPoX Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2543 107.2 PPPoX Engine Port Management Command . . . . . . . . . . . . . . . . . . . . . . . .2544
108- xDSL Management Commands
2545
108.1 xDSL Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2546 108.2 xDSL Line Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2547
109- Software Management Commands
2549
109.1 Software Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . .2550
xxiv
Released
3HH-08079-DDCA-TCZZA
01
Contents
109.2 Software Management Command . . . . 109.3 OSWP Software Management Command 109.4 Database Management Command . . . . 109.5 File Management Command . . . . . . . 109.6 SHub Software Management Command . 109.7 SHub Database Management Command 109.8 Update the SHub Boot ROM Command . 109.9 CDE Management Command . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
110- OSPF Management Commands
.2551 .2552 .2554 .2556 .2557 .2558 .2559 .2560
2561
110.1 OSPF Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2562 110.2 OSPF Interface MD5 Key Management Command . . . . . . . . . . . . . . . . . . . . .2563
111- RIP Management Commands
2565
111.1 RIP Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2566 111.2 RIP Interface MD5 Key Management Command . . . . . . . . . . . . . . . . . . . . . .2567
112- SHDSL Management Commands
2568
112.1 SHDSL Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2569 112.2 SHDSL Segment Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . .2570
113- Session Management Commands
2572
113.1 Session Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2573 113.2 Forced Disconnect Session Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .2574
114- System Management Commands 114.1 System Management Command Tree . . . . . . . 114.2 SYSLOG Management command . . . . . . . . . 114.3 Secure Shell Server Key Regeneration Command 114.4 PM File Upload Management Command . . . . . . 114.5 PM File Upload Management Command . . . . . . 114.6 CPU Load Management Command . . . . . . . .
2575 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
115- UDP debug Management Commands
.2576 .2577 .2578 .2579 .2580 .2581
2583
115.1 UDP debug Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . .2584 115.2 Forced Disconnect UDP debug Command . . . . . . . . . . . . . . . . . . . . . . . . . .2585
116- Trouble-Shooting Management Commands
2586
116.1 Trouble-Shooting Management Command Tree . . . . . . . . . . . . . . . . . . . . . . .2587 116.2 Trouble-shooting Interface Management Commands . . . . . . . . . . . . . . . . . . . .2588
117- Voice Management Commands 117.1 Voice Management Command Tree . . . . . . . . . . . . . . 117.2 Voice Megaco Database Management Command . . . . . . . 117.3 Voice Megaco Termination Lock Management Command . . 117.4 Voice Megaco Media Gateway Lock Management Command
2590 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
118- Voice Management Commands
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
.2591 .2592 .2593 .2595
2596
118.1 Voice Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2597
119- MSTP Management Commands
2598
119.1 MSTP Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2599 119.2 MSTP Port Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2600
3HH-08079-DDCA-TCZZA 01
Released
xxv
Contents
120- Equipment Management Commands 120.1 Equipment Management Command Tree 120.2 Equipment Management Command . . . 120.3 Slot Management Command . . . . . . . 120.4 SHub Port Management Command . . .
. . . .
2601 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
121- Ethernet Management Commands
.2602 .2603 .2604 .2606
2608
121.1 Ethernet Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . .2609 121.2 Ethernet Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2610
122- Bridge Management Commands
2611
122.1 Bridge Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2612 122.2 Learned Unicast MAC Address Management Command . . . . . . . . . . . . . . . . . .2613 122.3 VLAN Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2615
123- Trap Management Commands
2616
123.1 Trap Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2617 123.2 Trap Manager Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . .2618
124- IP Management Commands
2619
124.1 IP Management Command Tree . . . . . . . . . . . . . . . 124.2 Slot-related VRF Management Command . . . . . . . . . . 124.3 IP VRF Interface Reset Management Command . . . . . . 124.4 IP VRF Interface bridgeport Reset Management Command 124.5 Vlan Interface Delete Command . . . . . . . . . . . . . . . 124.6 ARP statistics Management Command . . . . . . . . . . . 124.7 SHub ARP Statistics Management Command . . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
125- DHCP Management Command
.2620 .2621 .2622 .2624 .2626 .2627 .2629
2630
125.1 DHCP Management Command Tree . . . . . . . . . . . . . 125.2 DHCP Relay User Port Management Command . . . . . . 125.3 DHCP Relay User Port Management Command . . . . . . 125.4 SHub DHCP Relay Agent Statistics Management Command
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
126- ARP-RELAY statistics Management Commands
. . . .
. . . .
. . . .
. . . .
. . . .
.2631 .2632 .2634 .2636
2637
126.1 ARP-RELAY statistics Management Command Tree . . . . . . . . . . . . . . . . . . . .2638 126.2 Arp-relay statistics Management Command . . . . . . . . . . . . . . . . . . . . . . . . .2639
127- Transport Management Commands
2641
127.1 Transport Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . .2642 127.2 IP Net-to-media Management Command . . . . . . . . . . . . . . . . . . . . . . . . . .2643
128- SNTP Management Commands
2644
128.1 SNTP Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2645 128.2 SNTP Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2646
129- Transactions Management Commands
2647
129.1 Transactions Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . .2648 129.2 Transaction Configuration Management Command . . . . . . . . . . . . . . . . . . . . .2649
130- Security Management Commands
xxvi
Released
2650
3HH-08079-DDCA-TCZZA
01
Contents
130.1 Security Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2651 130.2 Security 802.1x Port Authentication Management Command . . . . . . . . . . . . . . . .2652
131- MSTP Bridge Management Commands
2654
131.1 MSTP Bridge Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . .2655 131.2 Port-related MSTP Management Command . . . . . . . . . . . . . . . . . . . . . . . . .2656
132- Debug commands
2657
132.1 Debug commands Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2658 132.2 Debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2659
133- Ping Commands
2660
133.1 Ping Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2661 133.2 Ping Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2662 133.3 Ping Per Vrf Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2664
134- Traceroute Commands
2666
134.1 Traceroute Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2667 134.2 Traceroute Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2668 134.3 Traceroute Per Vrf Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2670
135- Global And Environmental Commands 135.1 History Command . . . . . . 135.2 Echo Command . . . . . . . 135.3 Telnet Command . . . . . . 135.4 Exec Command . . . . . . . 135.5 Sleep Command . . . . . . . 135.6 Tree Command . . . . . . . 135.7 Write Command . . . . . . . 135.8 Logout Command . . . . . . 135.9 Help Command . . . . . . . 135.10 Info Command . . . . . . . 135.11 Exit Command . . . . . . . 135.12 Back Command . . . . . . 135.13 Delete Command . . . . . 135.14 In Command . . . . . . . . 135.15 Configure Command . . . . 135.16 Action Command . . . . . . 135.17 Show Command . . . . . . 135.18 Recursive Show Command 135.19 Sample Command . . . . . 135.20 Poll Command . . . . . . . 135.21 Debug Command . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
2672 . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
136- CLI Filters
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
.2673 .2674 .2675 .2676 .2678 .2679 .2680 .2681 .2682 .2683 .2686 .2687 .2688 .2689 .2690 .2692 .2693 .2694 .2695 .2696 .2697
2698
136.1 Count Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2699 136.2 Match Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2700 136.3 Tee Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2701
137- CLI Printers
2702
137.1 More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2703 137.2 No-More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2704 137.3 Discard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2705
3HH-08079-DDCA-TCZZA 01
Released
xxvii
Contents
Index
xxviii
2706
Released
3HH-08079-DDCA-TCZZA
01
1- ISAM CLI
1.1 History 1.2 Preface 1.3 CLI Commands 1.4 Nodes 1.5 Parameters 1.6 Filters 1.7 Printers 1.8 Getting help 1.9 The CLI Prompt 1.10 Entering CLI Commands 1.11 CLI Backward Compatibility 1.12 Phase Out Strategy Obsolete Commands and/or Parameters 1.13 Command Phase Out Annoucement Release 1.14 Non supported commands/parameters
3HH-08079-DDCA-TCZZA 01
1-2 1-60 1-61 1-62 1-63 1-66 1-67 1-68 1-69 1-70 1-71 1-73 1-74 1-75
Released
1
1 ISAM CLI
1.1 History This history section enumerates the CLI commands which are new, modified or removed between any two subsequent releases. No details are provided within this section. The command description, syntax and parameters for each new and modified command is in the Command Syntax section of the respective command in the CLI Command Guide. To know the difference between e.g R2.4 and R2.2.03, review the delta's of the releases R2.4 versus R2.3.02 and R2.3.02 versus R2.2.03. To know the difference between e.g. FGN 3.0.02 and FGN 3.0, review the delta's of FGN 3.0.02 and all tables referencing FGN 3.0.
Command delta R4.3.02 and R4.3.01 versus R4.3 Modified Commands configure alarm entry (Board Level Vectoring and System Level Vectoring alarms) configure xdsl line (BL Vectoring SL Vectoring) configure xdsl board (BL Vectoring SL Vectoring) show alarm log xdsl near-end (BL Vectoring SL Vectoring) show alarm current xdsl (BL Vectoring SL Vectoring) show alarm snap-shot xdsl (BL Vectoring SL Vectoring) show alarm log (BL Vectoring SL Vectoring) show alarm current (BL Vectoring SL Vectoring) show alarm snap-shot (BL Vectoring SL Vectoring) show alarm delta-log (BL Vectoring SL Vectoring) show system license (BL Vectoring SL Vectoring) show xdsl profiles (BL Vectoring SL Vectoring) show xdsl operational-data near-end line (BL Vectoring SL Vectoring) show xdsl carrier-data near-end (BL Vectoring SL Vectoring) show xdsl carrier-data far-end (BL Vectoring SL Vectoring) show xdsl failure-status far-end (BL Vectoring SL Vectoring) show xdsl failure-status near-end (BL Vectoring SL Vectoring) show xdsl counters near-end line current-interval (BL Vectoring SL Vectoring) show xdsl counters near-end line current-1day (BL Vectoring SL Vectoring) show xdsl counters near-end line previous-interval (BL Vectoring SL Vectoring) show xdsl counters near-end line previous-1day (BL Vectoring SL Vectoring) configure qos interface (Support for Ethernet DS and US queues on the ONT,GPON VLAN port level queues for upstream - OLT part)
2
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure qos interface upstream-queue (Remote VLAN port queues in upstream) configure qos tca queue (Remote VLAN port queues in upstream) configure voice cluster equipment (Configurable line gain and line impedance) configure voice sip termination (Configurable line gain and line impedance) show qos interface-bandwidth (Remote VLAN port queues in upstream) show qos statistics queue current-15min (Remote VLAN port queues in upstream) show qos statistics queue prev-15min (Remote VLAN port queues in upstream) configure system ( Allow U2U with Hairpin) configure system security filetransfer (TFTP transfer blksize configurable) configure xdsl overrule-data (Config of interleaver mem. split VDSL2) configure xdsl service-profile (Config of interleaver mem. split VDSL2) configure xdsl-bonding group-profile (enabling 8 port bonding in iSAM) configure qos profile policer (CCL on NELT-B NNI and Extend EBS range to improve TCP goodput) configure system loop-id-syntax (GPON support) New Commands show voice sip statistics board (SIP statistics) show voice sip statistics board current-15min (SIP statistics) show voice sip statistics board current-1day (SIP statistics) show voice sip statistics board prev-15min (SIP statistics) show voice sip statistics board prev-1day (SIP statistics) show voice sip statistics board-perfinfo (SIP statistics) show xdsl co-inventory (Parameter Alignment with G.997.1) show alarm log vect-line (BL Vectoring SL Vectoring) show alarm current vect-line (BL Vectoring SL Vectoring) show alarm snap-shot vect-line (BL Vectoring SL Vectoring) show alarm log vect-board (SL Vectoring) show alarm current vect-board (SL Vectoring) show alarm snap-shot vect-board (SL Vectoring) configure xdsl vect-profile (BL Vectoring SL Vectoring) configure xdsl vce-profile (BL Vectoring SL Vectoring)
3HH-08079-DDCA-TCZZA 01
Released
3
1 ISAM CLI
configure xdsl vp-board vp-link (SL Vectoring) show xdsl vp-board vp-link (SL Vectoring) show xdsl vect-disturbers max-reported-dist (BL Vectoring SL Vectoring) show xdsl vect-carrier-data near-end disturber (BL Vectoring SL Vectoring) show xdsl vect-carrier-data far-end disturber (BL Vectoring SL Vectoring) show xdsl failure-status vect-board (SL Vectoring) show xdsl failure-status vect-line-near-end (BL Vectoring SL Vectoring) Removed Commands show qos pcc-rules fwd-port (Resource Admission Control Feature)
Command delta R4.3 versus R4.2.03 Modified Commands configure alarm entry (NTP and multiple xNTP servers support,NRCD-B cntrl card SW upgrade) configure igmp channel (GPON IOP for IGMP CAC and access-rights) configure igmp system (GPON IOP for IGMP CAC and access-rights) configure l2cp session (ANCP - set Partition ID field) configure mcast chn (GPON IOP for IGMP CAC and access-rights) configure qos interface (GPON UNI scheduling/shaping based on queue parameters) configure qos interface queue (GPON UNI scheduling/shaping based on queue parameters) configure qos interface upstream-queue (upstream policing and queue config) configure qos profiles ingress-qos (GPON LT color-aware trTCM) configure qos profiles policer (GPON LT color-aware trTCM) configure qos profiles scheduler-node (downstream UNI rate shaping to include multicast traffic) configure qos profiles shaper (GPON UNI scheduling/shaping based on queue parameters) configure system sync-if-timing (Full SSM on SyncE) configure system sync-if-timing ssm (Full SSM on SyncE) configure vlan id (Add DSL parameters in DHCPv4/v6 / PPPoE,ISAM acting as SNTP server towards GPON ONTs) configure voice cluster media-gateway (SIP Restoration)
4
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure voice cluster signal-gateway (SIP Restoration) configure voice cluster equipment (SIP Restoration) configure voice sip server (SIP Restoration) configure voice sip termination (SIP Restoration) configure voice sip user-agent (SIP Restoration) configure voice sip system session-timer (SIP Restoration) configure voice sip user-agent-ap (SIP Restoration) configure voice sip vsp (SIP Restoration) show equipment diagnostics sfp (Digital Diagnostics for SFP XFP modules) New Commands admin alarm clear-alarm filetransfer ip-address (manually clear filetransfer alarm) admin system security pmfile upload (SIP: Collect statistics via FTP) admin voice sip (Common Voice Software for ONT and ISAM-V) configure igmp mc-vlan-xlate (GPON IOP for IGMP CAC and access-rights) configure igmp mcast-svc-context (GPON IOP for IGMP CAC and access-rights) configure qos ctrl-pkt-policer (Upstream policing per protocol) configure qos profiles marker (GPON LT color-aware trTCM) configure qos profiles marker dot1p-remark (GPON LT color-aware trTCM) configure system security pmfile (SIP : Collect statistics via FTP) configure system security pmfile upload (SIP : Collect statistics via FTP) configure system sntp server-table (NTP and multiple xNTP servers support) configure system sntp server-table ip-address (NTP and multiple xNTP servers support) configure system sync-if-timing ssmout-ltport (Full SSM on SyncE) configure system sync-if-timing ssmout-synce (Full SSM on SyncE) configure system sync-if-timing t4-out-config (Full SSM on SyncE) configure voice sip dhcp-authent-para (SIP Restoration) configure voice sip dnsserver (SIP Restoration) configure voice sip transport (SIP Restoration) configure voice sip redundancy (SIP Restoration) configure voice sip redundancy-cmd (SIP Restoration) configure voice sip register (SIP Restoration) configure xdsl vp-board (SLVectoring)
3HH-08079-DDCA-TCZZA 01
Released
5
1 ISAM CLI
show alarm current sip-dial-plan (SIP Restoration) show alarm current sip-server (SIP Restoration) show alarm current sip-vsp (SIP Restoration) show alarm log sip-dial-plan (SIP Restoration) show alarm log sip-server (SIP Restoration) show alarm log sip-vsp (SIP Restoration) show alarm snap-shot sip-dial-plan (SIP Restoration) show alarm snap-shot sip-server (SIP Restoration) show alarm snap-shot sip-vsp (SIP Restoration) show equipment transceiver-inventory (Digital Diagnostics for SFP XFP modules) show igmp mcast-svc-context (GPON IOP for IGMP CAC and access-rights) show security pmfile upload (SIP: Collect statistics via FTP) show sntp server-table (NTP and multiple xNTP servers support) show system sync-if-timing-t4 (Full SSM on SyncE) show trouble-shooting statistics uni-interface (IP anti-spoofing statistics) show voice sip redundancy-node (SIP Restoration) show voice sip redundancy-node redundancy-cmd (SIP Restoration) show voice sip redundancy-node redundancy-state (SIP Restoration) Removed Commands configure system security domain ip-pool (removal of DR6ed feature) configure system security domain user (removal of DR6ed feature) configure voice sip termination local-loop (removal of DR6ed feature) configure xdsl line local-loop (removal of DR6ed feature) show alarm current llu-relay (removal of DR6ed feature) show alarm current sip-user-agent (SIP Restoration) show alarm log llu-relay (removal of DR6ed feature) show alarm log sip-user-agent (SIP Restoration) show alarm snap-shot llu-relay (removal of DR6ed feature) show alarm snap-shot sip-user-agent (SIP Restoration)
Command delta R4.2.03 versus R4.2.02 Modified Commands configure xdsl-bonding group-profile (Configuration of 8 port board level bonding)
6
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show vlan current and previous stats commands (minor bug fixing) show vlan port current and previous stats commands (minor bug fixing) show vlan vlan-day-stats (minor bug fixing)
Command delta R4.2.02 versus R4.2 Modified Commands configure igmp channel (Multicast channel selection by vlan-id) configure igmp system (Multicast channel selection by vlan-id) configure shdsl span (CTC support with SHDSL proxy) configure system syslog (DomLead RAL Support (GPON)) configure trap manager (FD 36p Ethernet LT (NELT-B)) configure trap definition (FD 36p Ethernet LT (NELT-B)) configure alarm shub entry (NRNT-A mini ISAM NT) configure alarm entry (minor problem solving) show trouble-shooting statistics interface (FULL CLI) show igmp grp-to-package (Multicast channel selection by vlan-id) show igmp module-mcast-channel (Multicast channel selection by vlan-id) show voice sip statistics call (ISAM_V,SIP POTS statistics feature) configure cfm domain association (Jitter, Latency, RT performance report- CFM) configure cfm domain association mep (Jitter, Latency, RT performance report- CFM) show cfm stack (Jitter, Latency, RT performance report- CFM) show arp-relay-stats vlan (minor problem solving) New Commands admin alarm shub clear-alarm (CLI clear command for Neighbour State Changed alarm on NANT-A) admin xstp (FD 36p Ethernet LT (NELT-B)) admin xstp port (FD 36p Ethernet LT (NELT-B)) admin igmp mcast-chn (Multicast channel selection) configure mcast (Multicast channel selection based on VlanID) configure mcast chn (Multicast channel selection based on VlanID) configure mcast monitor (Multicast channel selection based on VlanID) show xdsl-bonding operational-data lin (Transport B-Fast) configure linetest (ISAM-V H248 CLI enhancement)
3HH-08079-DDCA-TCZZA 01
Released
7
1 ISAM CLI
configure linetest cluster (ISAM-V H248 CLI enhancement) configure linetest cluster ltline (ISAM-V H248 CLI enhancement) configure linetest cluster ltparam (ISAM-V H248 CLI enhancement) configure linetest cluster ltsession (ISAM-V H248 CLI enhancement) show linetest (ISAM-V H248 CLI enhancement) show linetest cluster (ISAM-V H248 CLI enhancement) show linetest cluster avail-sess (ISAM-V H248 CLI enhancement) show linetest cluster lineid-ext-rept (ISAM-V H248 CLI enhancement) show linetest cluster ltline (ISAM-V H248 CLI enhancement) show linetest cluster ltsession (ISAM-V H248 CLI enhancement) configure linetest single (ISAM-V H248 CLI enhancement) configure linetest single ltline (ISAM-V H248 CLI enhancement) configure linetest single ltparam (ISAM-V H248 CLI enhancement) configure linetest single ltsession (ISAM-V H248 CLI enhancement) show linetest single (ISAM-V H248 CLI enhancement) show linetest single avail-sess (ISAM-V H248 CLI enhancement) show linetest single lineid-ext-rept (ISAM-V H248 CLI enhancement) show linetest single ltline (ISAM-V H248 CLI enhancement) show linetest single ltsession (ISAM-V H248 CLI enhancement) Removed Commands configure linetst (ISAM-V H248 CLI enhancement) configure linetst cluster (ISAM-V H248 CLI enhancement) configure linetst cluster ltline (ISAM-V H248 CLI enhancement) configure linetst cluster ltparam (ISAM-V H248 CLI enhancement) configure linetstcluster ltsession (ISAM-V H248 CLI enhancement) configure linetst single (ISAM-V H248 CLI enhancement) configure linetst single ltline (ISAM-V H248 CLI enhancement) configure linetst single ltparam (ISAM-V H248 CLI enhancement) configure linetst single ltsession (ISAM-V H248 CLI enhancement) show linetst (ISAM-V H248 CLI enhancement) show linetst cluster (ISAM-V H248 CLI enhancement) show linetst cluster avail-sess (ISAM-V H248 CLI enhancement) show linetst cluster lineid-ext-rept (ISAM-V H248 CLI enhancement) show linetst cluster ltline (ISAM-V H248 CLI enhancement) show linetst cluster ltsession (ISAM-V H248 CLI enhancement)
8
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show linetst single (ISAM-V H248 CLI enhancement) show linetst single avail-sess (ISAM-V H248 CLI enhancement) show linetst single lineid-ext-rept (ISAM-V H248 CLI enhancement) show linetst single ltline (ISAM-V H248 CLI enhancement) show linetst single ltsession (ISAM-V H248 CLI enhancement)
Command delta R4.2 versus R4.0.10 Modified Commands admin equipment port (NRNT-A; mini-ISAM NT) admin equipment slot (NRNT-A; mini-ISAM NT) admin mstp port (NRNT-A; mini-ISAM NT) admin shdsl-seg unit-id (SHDSL evolution on NSLT-b) admin system cpu-load (NRNT-A; mini-ISAM NT) configure alarm entry (NRNT-A; mini-ISAM NT) configure alarm shub entry (NRNT-A; mini-ISAM NT) configure bridge shub port (NRNT-A; mini-ISAM NT) configure cluster port (NRNT-A; mini-ISAM NT) configure debug-trace protocol-trace (IPv6 Protocol Aware CC with DHCPv6 on FD) configure equipment slot (NRNT-A CLI/TL1 Adaptation) configure ethernet line (FD 36p Ethernet LT (NELT-B)) configure igmp shub vlan-router-port (NRNT-A; mini-ISAM NT) configure igmp channel (GPON support) configure interface port (FD 36p Ethernet LT (NELT-B)) configure interface shub group group-id (NRNT-A; mini-ISAM NT) configure interface shub mirror (NRNT-A; mini-ISAM NT) configure interface shub mirror port (NRNT-A; mini-ISAM NT) configure interface shub port (NRNT-A; mini-ISAM NT) configure la aggregator-port (NRNT-A; mini-ISAM NT) configure mcast shub mcast-addr vlan-id (NRNT-A; mini-ISAM NT) configure mstp port (NRNT-A; mini-ISAM NT) configure mstp port-instance (NRNT-A; mini-ISAM NT) configure qos profiles l2-filter (IPv6 Protocol Aware CC with DHCPv6 on FD) configure qos profiles policer (FD 36p Ethernet LT (NELT-B)) configure qos profiles queue (FD 36p Ethernet LT (NELT-B)) configure qos shub policer (NRNT-A; mini-ISAM NT)
3HH-08079-DDCA-TCZZA 01
Released
9
1 ISAM CLI
configure qos shub queue-config (NRNT-A; mini-ISAM NT) configure qos tc-map-dot1p (FD 36p Ethernet LT (NELT-B)) configure qos tca queue (GPON support) configure shdsl segment unit-id (SHDSL evolution on NSLT-b) configure shdsl span (SHDSL evolution on NSLT-b) configure shdsl unit unit-id (SHDSL evolution on NSLT-b) configure system security profile (Lawful Intercept) configure system security default-profile (Lawful Intercept) configure system security snmp group security-level (Lawful Intercept) configure system security snmp map-user-group (Lawful Intercept) configure system shub filter ip-filter in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter icmp in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter icmp out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter port-filter in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter port-filter out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter tcp in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter tcp out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter udp in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter udp out-port (NRNT-A; mini-ISAM NT) configure system syslog route msg-type (Lawful Intercept) configure transport shub mac-infilter (NRNT-A; mini-ISAM NT) configure transport shub rate-limit (NRNT-A; mini-ISAM NT) configure trap manager (Reliable Trap management) configure trap definition (Reliable Trap management) configure vlan id (IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan port-protocol (IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan shub unicast-mac (NRNT-A; mini-ISAM NT) configure vlan shub id egress-port (NRNT-A; mini-ISAM NT)
10
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure vlan shub id untag-port (NRNT-A; mini-ISAM NT) configure voice cluster media-gateway (ISAM-V) configure voice cluster equipment board (ISAM-V) configure voice cluster equipment termination (ISAM-V) configure voice sip termination (ISAM-V) configure voice sip lineid-syn-prof (ISAM-V) configure voice sip vsp (ISAM-V) configure xdsl overrule-data (standard ARQ for ADSL2 (+)and VDSL2) configure xdsl service-profile (SRA for VDSL2) configure xdsl line (standard ARQ for ADSL2 (+)and VDSL2) configure xdsl line tca-line-threshold (standard ARQ for ADSL2 (+)and VDSL2) configure xdsl-bonding group-profile (8p PTM VDSL2 bonding on FD) show bridge network-port (NRNT-A; mini-ISAM NT) show cluster connect (NRNT-A; mini-ISAM NT) show cluster counter (NRNT-A; mini-ISAM NT) show cluster neighbour (NRNT-A; mini-ISAM NT) show equipment slot (NRNT-A CLI/TL1 Adaptation) show equipment temperature (NRNT-A; mini-ISAM NT) show igmp shub vlan-router-port (NRNT-A; mini-ISAM NT) show interface port (FD 36p Ethernet LT (NELT-B)) show interface shub port (NRNT-A; mini-ISAM NT) show interface shub statistics (NRNT-A; mini-ISAM NT) show interface stack (FD 36p Ethernet LT (NELT-B)) show interface test (FD 36p Ethernet LT (NELT-B)) show la aggregate-list (NRNT-A; mini-ISAM NT) show la aggregator-info (NRNT-A; mini-ISAM NT) show la network-port-info (NRNT-A; mini-ISAM NT) show mcast shub igs-vlan-grp (NRNT-A; mini-ISAM NT) show mstp network-port (NRNT-A; mini-ISAM NT) show mstp port-instance (NRNT-A; mini-ISAM NT) show pccp port-entry (NRNT-A; mini-ISAM NT) show qos interface-bandwidth (GPON support) show qos statistics buffer-overflow current-1day (NRNT-A; mini-ISAM NT) show qos statistics queue current-15min (GPON support)
3HH-08079-DDCA-TCZZA 01
Released
11
1 ISAM CLI
show qos statistics queue prev-15min (GPON support) show shdsl inventory (SHDSL evolution on NSLT-b) show shdsl segment-counters current-15min (SHDSL evolution on NSLT-b) show shdsl segment-counters current-1day (SHDSL evolution on NSLT-b) show shdsl segment-counters previous-15min (SHDSL evolution on NSLT-b) show shdsl segment-counters previous-1day (SHDSL evolution on NSLT-b) show shdsl segment-status (SHDSL evolution on NSLT-b) show shdsl unit-status (SHDSL evolution on NSLT-b) show system cpu-load (NRNT-A; mini-ISAM NT) show system license (NRNT-A CLI/TL1 Adaptation) show system memory-usage (NRNT-A; mini-ISAM NT) show system shub config-control (NRNT-A; mini-ISAM NT) show transport shub dot3-control (NRNT-A; mini-ISAM NT) show transport shub dot3-pause (NRNT-A; mini-ISAM NT) show transport shub dot3-status (NRNT-A; mini-ISAM NT) show transport shub mac (NRNT-A; mini-ISAM NT) show transport shub rate (NRNT-A; mini-ISAM NT) show trouble-shooting statistics interface (PT Counters) show vlan residential-bridge extensive (FD 36p Ethernet LT (NELT-B)) show vlan residential-bridge summary (FD 36p Ethernet LT (NELT-B)) show vlan shub-dup-mac-alarm (NRNT-A; mini-ISAM NT) show vlan shub-port-vlan-map (NRNT-A; mini-ISAM NT) show voice sip statistics call (ISAM-V) New Commands admin dhcp-relay v6-port-stats (IPv6 Protocol Aware CC with DHCPv6 on FD) admin alarm shub clear-alarm vrf interface (Problem Solving) admin voice cluster equipment (ISAM-V) admin voice cluster media-gateway (ISAM-V) admin xstp port clear-protocols (FD 36p Ethernet LT (NELT-B)) configure dhcp-relay v6-port-stats (IPv6 Protocol Aware CC with DHCPv6 on FD) configure ethernet line mau (FD 36p Ethernet LT (NELT-B))
12
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure linetest (ISAM-V H248 : CLI enhancements) configure linetest cluster (ISAM-V H248 : CLI enhancements) configure linetest cluster ltline (ISAM-V H248 : CLI enhancements) configure linetest cluster ltparm (ISAM-V H248 : CLI enhancements) configure linetest cluster ltsession (ISAM-V H248 : CLI enhancements) configure linetest single (ISAM-V H248 : CLI enhancements) configure linetest single ltline lineid (ISAM-V H248 : CLI enhancements) configure linetest single ltparm tst-type (ISAM-V H248 : CLI enhancements) configure linetest single ltsession session-cmd (ISAM-V H248 : CLI enhancements) configure link-agg (FD 36p Ethernet LT (NELT-B)) configure link-agg general priority (FD 36p Ethernet LT (NELT-B)) configure link-agg group load-sharing-policy (FD 36p Ethernet LT (NELT-B)) configure link-agg group port (FD 36p Ethernet LT (NELT-B)) configure link-agg port passive-lacp (FD 36p Ethernet LT (NELT-B)) configure mcast static (FD 36p Ethernet LT (NELT-B)) configure mcast static branch (FD 36p Ethernet LT (NELT-B)) configure system max-lt-link-speed link-speed (NRNT-A CLI/TL1 Adaptation) configure system shub icmp time-stamp-reply (minor problem solving) configure system sync-if-timing revert (NRNT-A; mini-ISAM NT) configure system sync-if-timing bits configure system sync-if-timing force-reference (NRNT-A; mini-ISAM NT) configure system sync-if-timing ref-order priority (NRNT-A; mini-ISAM NT) configure system sync-if-timing ssm ssmenable (NRNT-A; mini-ISAM NT) configure system sync-if-timing synce (NRNT-A; mini-ISAM NT) configure voice cluster signal-gateway (ISAM-V) configure xdsl rtx-profile (standard ARQ for ADSL2 (+)and VDSL2) configure xstp (FD 36p Ethernet LT (NELT-B)) configure xstp instance (FD 36p Ethernet LT (NELT-B)) configure xstp general enable-stp (FD 36p Ethernet LT (NELT-B)) configure xstp instance associate-vlan (FD 36p Ethernet LT (NELT-B))
3HH-08079-DDCA-TCZZA 01
Released
13
1 ISAM CLI
configure xstp port priority (FD 36p Ethernet LT (NELT-B)) configure xstp port-instance instance (FD 36p Ethernet LT (NELT-B)) show alarm current megaco-media-gw (ISAM-V H248 : CLI enhancements) show alarm current megaco-plug-unit (ISAM-V H248 : CLI enhancements) show alarm current megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm current megaco-sig-lt (ISAM-V H248 : CLI enhancements) show alarm current megaco-term (ISAM-V H248 : CLI enhancements) show alarm current sip-user-agent (minor problem solving) show alarm current sync (NRNT-A CLI/TL1 Adaptation) show alarm log megaco-media-gw (ISAM-V H248 : CLI enhancements) show alarm log megaco-plug-unit (ISAM-V H248 : CLI enhancements) show alarm log megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm log megaco-sig-lt (ISAM-V H248 : CLI enhancements) show alarm log megaco-term (ISAM-V H248 : CLI enhancements) show alarm log sip-user-agent (minor problem solving) show alarm log sync (NRNT-A CLI/TL1 Adaptation) show alarm snap-shot megaco-media-gw (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-plug-unit (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-sig-lt (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-term (ISAM-V H248 : CLI enhancements) show alarm snap-shot sip-user-agent (minor problem solving) show alarm snap-shot sync (NRNT-A CLI/TL1 Adaptation) show dhcp-relay v6-port-stats (IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan (IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6extensive (IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6summary (IPv6 Protocol Aware
14
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
CC with DHCPv6 on FD) show ethernet statistics (FD 36p Ethernet LT (NELT-B)) show ethernet statistics line (FD 36p Ethernet LT (NELT-B)) show ipv6 (IPv6 Protocol Aware CC with DHCPv6 on FD) show linetest (ISAM-V H248 : CLI enhancements) show linetest cluster (ISAM-V H248 : CLI enhancements) show linetest cluster avail-sess (ISAM-V H248 : CLI enhancements) show linetest cluster lineid-ext-rept (ISAM-V H248 : CLI enhancements) show linetest cluster ltline (ISAM-V H248 : CLI enhancements) show linetest cluster ltsession (ISAM-V H248 : CLI enhancements) show linetest single (ISAM-V H248 : CLI enhancements) show linetest single avail-sess (ISAM-V H248 : CLI enhancements) show linetest single lineid-ext-rept lineid (ISAM-V H248 : CLI enhancements) show linetest single ltline lineid (ISAM-V H248 : CLI enhancements) show linetest single ltsession (ISAM-V H248 : CLI enhancements) show link-agg (FD 36p Ethernet LT (NELT-B)) show link-agg group-info (FD 36p Ethernet LT (NELT-B)) show link-agg member-port port (FD 36p Ethernet LT (NELT-B)) show link-agg port-info port (FD 36p Ethernet LT (NELT-B)) show system sync-if-timing priority (NRNT-A CLI/TL1 Adaptation) show voice cluster ip (ISAM-V) show voice cluster signal-gateway (ISAM-V) show xstp (FD 36p Ethernet LT (NELT-B)) show xstp bridge (FD 36p Ethernet LT (NELT-B)) show xstp instance (FD 36p Ethernet LT (NELT-B)) show xstp port (FD 36p Ethernet LT (NELT-B)) show xstp port-instance (FD 36p Ethernet LT (NELT-B)) Removed Commands configure mcast src (Fixed multicast VLAN per IGMP channel) configure mcast src packagemember (Fixed multicast VLAN per IGMP channel) show bridge port-to-atm-pvc (ISAM-V H248:CLI enhancements)
Command delta R4.2 versus R4.1.02
3HH-08079-DDCA-TCZZA 01
Released
15
1 ISAM CLI
Modified Commands admin arp-relay-stats (GPON support) admin bridge learned-unicast-mac (GPON support) admin dhcp-relay port-stats (GPON support) admin equipment port (NRNT-A; mini-ISAM NT) admin equipment slot (NRNT-A; mini-ISAM NT) admin igmp channel (GPON support) admin mstp port (NRNT-A; mini-ISAM NT) admin security ext-authenticator (GPON support) admin system cpu-load (NRNT-A; mini-ISAM NT) admin trouble-shooting interface (GPON support) configure alarm entry (NRNT-A; mini-ISAM NT) configure alarm shub entry (NRNT-A; mini-ISAM NT) configure arp-relay statistics (GPON support) configure bridge port (GPON support) configure bridge shub port (NRNT-A; mini-ISAM NT) configure cluster port (NRNT-A; mini-ISAM NT) configure debug-trace protocol-trace (IPv6 Protocol Aware CC with DHCPv6 on FD) configure dhcp-relay port-stats (GPON support) configure equipment slot (NRNT-A CLI/TL1 Adaptation) configure ethernet line (FD 36p Ethernet LT (NELT-B)) configure igmp channel (GPON support) configure igmp shub vlan-router-port (NRNT-A; mini-ISAM NT) configure igmp system (GPON support) configure interface port (FD 36p Ethernet LT (NELT-B)) configure interface shub group port (NRNT-A; mini-ISAM NT) configure interface shub mirror (NRNT-A; mini-ISAM NT) configure interface shub mirror port (NRNT-A; mini-ISAM NT) configure interface shub port (NRNT-A; mini-ISAM NT) configure la aggregator-port (NRNT-A; mini-ISAM NT) configure mcast shub mcast-addr vlan-id (NRNT-A; mini-ISAM NT) configure mstp port (NRNT-A; mini-ISAM NT) configure mstp port-instance instance (NRNT-A; mini-ISAM NT) configure pppox-relay cross-connect client-port (GPON support) configure qos dsl-port (GPON support) configure qos interface (GPON support)
16
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure qos interface queue (GPON support) configure qos profiles cac (GPON support) configure qos profiles l2-filter (IPv6 Protocol Aware CC with DHCPv6 on FD) configure qos profiles policer (FD 36p Ethernet LT (NELT-B)) configure qos profiles queue (GPON support) configure qos profiles shaper (GPON support) configure qos shdsl-port (GPON support) configure qos shub policer (NRNT-A; mini-ISAM NT) configure qos shub queue-config (NRNT-A; mini-ISAM NT) configure qos tc-map-dot1p (FD 36p Ethernet LT (NELT-B)) configure qos tca queue (GPON support) configure system loop-id-syntax (GPON support) configure system security profile (Lawful Intercept) configure system security default-profile (Lawful Intercept) configure system security pae authenticator (GPON support) configure system security pae ext-authenticator (GPON support) configure system security pae port (GPON support) configure system security radius (GPON support) configure system security ssh access (GPON support) configure system security snmp group security-level (Lawful Intercept) configure system security snmp map-user-group (Lawful Intercept) configure system shub filter ip-filter in-port port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter out-port port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter icmp in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter icmp out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter port-filter in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter port-filter out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter tcp in-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter tcp out-port (NRNT-A; mini-ISAM NT) configure system shub filter ip-filter udp in-port (NRNT-A; mini-ISAM NT)
3HH-08079-DDCA-TCZZA 01
Released
17
1 ISAM CLI
configure system shub filter ip-filter udp out-port (NRNT-A; mini-ISAM NT) configure system syslog destination (GPON support) configure system syslog route msg-type (GPON support) configure transport shub mac-infilter port (NRNT-A; mini-ISAM NT) configure transport shub rate-limit (NRNT-A; mini-ISAM NT) configure trap manager (Reliable Trap management) configure trouble-shooting statistics interface (GPON support) configure trap definition (Reliable Trap management) configure vlan id (IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan port-protocol protocol-group (IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan unicast-mac vlan-id (GPON support) configure vlan vlan-port unicast-mac (GPON support) configure vlan pbit-statistics port (GPON support) configure vlan shub unicast-mac (NRNT-A; mini-ISAM NT) configure vlan shub id egress-port (NRNT-A; mini-ISAM NT) configure vlan shub id untag-port (NRNT-A; mini-ISAM NT) configure voice cluster media-gateway (ISAM-V) configure voice cluster equipment board (ISAM-V) configure voice cluster equipment termination (ISAM-V) configure voice sip termination (ISAM-V) configure voice sip lineid-syn-prof (ISAM-V) configure voice sip vsp (ISAM-V) configure xdsl overrule-data (standard ARQ for ADSL2 (+)and VDSL2) configure xdsl service-profile (SRA for VDSL2) configure xdsl line (standard ARQ for ADSL2 (+)and VDSL2) configure xdsl line tca-line-threshold (standard ARQ for ADSL2 (+)and VDSL2) configure xdsl-bonding group-profile (8p PTM VDSL2 bonding on FD) show arp-relay-stats (GPON support) show bridge network-port (NRNT-A; mini-ISAM NT) show cluster connect (NRNT-A; mini-ISAM NT) show cluster counter (NRNT-A; mini-ISAM NT) show cluster neighbour (NRNT-A; mini-ISAM NT) show config-data-port igmp (GPON support)
18
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show config-data-port qos scheduler-profile (GPON support) show dhcp-relay port-stats (GPON support) show dhcp-relay session (GPON support) show equipment slot (NRNT-A CLI/TL1 Adaptation) show equipment temperature (NRNT-A; mini-ISAM NT) show igmp channel counter (GPON support) show igmp channel miscellaneous (GPON support) show igmp channel protocol (GPON support) show igmp shub vlan-router-port (NRNT-A; mini-ISAM NT) show interface port (FD 36p Ethernet LT (NELT-B)) show interface shub port (NRNT-A; mini-ISAM NT) show interface shub statistics (NRNT-A; mini-ISAM NT) show interface stack (FD 36p Ethernet LT (NELT-B)) show interface test (FD 36p Ethernet LT (NELT-B)) show la aggregate-list (NRNT-A; mini-ISAM NT) show la aggregator-info (NRNT-A; mini-ISAM NT) show la network-port-info (NRNT-A; mini-ISAM NT) show mcast active-groups (NRNT-A; mini-ISAM NT) show mcast grp-membership (NRNT-A; mini-ISAM NT) show mcast shub igs-vlan-grp (NRNT-A; mini-ISAM NT) show mstp network-port (NRNT-A; mini-ISAM NT) show mstp port-instance (NRNT-A; mini-ISAM NT) show oper-data-port igmp (GPON support) show pccp port-entry (NRNT-A; mini-ISAM NT) show pppox-relay cross-connect monitor-statistics client-port (GPON support) show pppox-relay cross-connect session client-port (GPON support) show pppox-relay cross-connect statistics client-port (GPON support) show qos statistics queue current-15min (GPON support) show qos statistics queue prev-15min (GPON support) show security pae authenticator (GPON support) show security pae diagnostics (GPON support) show security pae eapol-stats (GPON support) show security pae port-details (GPON support) show security pae session-stats (GPON support) show system cpu-load (NRNT-A; mini-ISAM NT) show system license (NRNT-A CLI/TL1 Adaptation)
3HH-08079-DDCA-TCZZA 01
Released
19
1 ISAM CLI
show system memory-usage (NRNT-A; mini-ISAM NT) show system shub config-control (NRNT-A; mini-ISAM NT) show transport shub dot3-control (NRNT-A; mini-ISAM NT) show transport shub dot3-pause (NRNT-A; mini-ISAM NT) show transport shub dot3-status (NRNT-A; mini-ISAM NT) show transport shub mac (NRNT-A; mini-ISAM NT) show transport shub rate (NRNT-A; mini-ISAM NT) show trouble-shooting statistics interface (GPON support) show vlan bridge-port-fdb (GPON support) show vlan cross-connect (GPON support) show vlan current-15min-stats (GPON support) show vlan current-day-stats (GPON support) show vlan dup-mac-alarm (GPON support) show vlan pbit-statistics port (GPON support) show vlan port-15min-stats (GPON support) show vlan port-curr-15min-stats (GPON support) show vlan port-curr-day-stats (GPON support) show vlan port-event (GPON support) show vlan port-prev-day-stats (GPON support) show vlan previous-15min-stats (GPON support) show vlan residential-bridge extensive (FD 36p Ethernet LT (NELT-B)) show vlan residential-bridge summary (FD 36p Ethernet LT (NELT-B)) show vlan shub-dup-mac-alarm (NRNT-A; mini-ISAM NT) show vlan shub-port-vlan-map (NRNT-A; mini-ISAM NT) show vlan vlan-day-stats (GPON support) show vlan vmac-bridge-port-fdb (GPON support) show voice sip statistics call interval (ISAM-V) show xdsl config-data-port qos scheduler-profile (GPON support) show xdsl oper-data-port igmp (GPON support) New Commands admin dhcp-relay v6-port-stats (IPv6 Protocol Aware CC with DHCPv6 on FD) admin voice cluster equipment (ISAM-V) admin voice cluster media-gateway (ISAM-V) configure dhcp-relay v6-port-stats (IPv6 Protocol Aware CC with DHCPv6 on FD)
20
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure ethernet line mau (FD 36p Ethernet LT (NELT-B)) configure linetest (ISAM-V H248 : CLI enhancements) configure linetest cluster (ISAM-V H248 : CLI enhancements) configure linetest cluster ltline lineid (ISAM-V H248 : CLI enhancements) configure linetest cluster ltparm tst-type (ISAM-V H248 : CLI enhancements) configure linetest cluster ltsession (ISAM-V H248 : CLI enhancements) configure linetest single (ISAM-V H248 : CLI enhancements) configure linetest single ltline lineid (ISAM-V H248 : CLI enhancements) configure linetest single ltparm tst-type (ISAM-V H248 : CLI enhancements) configure linetest single ltsession (ISAM-V H248 : CLI enhancements) configure link-agg (FD 36p Ethernet LT (NELT-B)) configure link-agg general priority (FD 36p Ethernet LT (NELT-B)) configure link-agg group load-sharing-policy (FD 36p Ethernet LT (NELT-B)) configure link-agg group port (FD 36p Ethernet LT (NELT-B)) configure link-agg port passive-lacp (FD 36p Ethernet LT (NELT-B)) configure mcast monitor (GPON support) configure mcast monitor src (GPON support) configure mcast static (FD 36p Ethernet LT (NELT-B)) configure mcast static branch (FD 36p Ethernet LT (NELT-B)) configure qos interface upstream-queue (GPON support) configure qos profiles bandwidth (GPON support) configure qos profiles ingress-qos (GPON support) configure qos profiles scheduler-node (GPON support) configure system max-lt-link-speed (NRNT-A CLI/TL1 Adaptation) configure system sync-if-timing revert (NRNT-A; mini-ISAM NT) configure system sync-if-timing bits configure system sync-if-timing force-reference (NRNT-A; mini-ISAM NT) configure system sync-if-timing ref-order (NRNT-A; mini-ISAM NT) configure system sync-if-timing ssm (NRNT-A; mini-ISAM NT) configure system sync-if-timing synce (NRNT-A; mini-ISAM NT) configure voice cluster signal-gateway (ISAM-V) configure xdsl rtx-profile (standard ARQ for ADSL2 (+)and VDSL2)
3HH-08079-DDCA-TCZZA 01
Released
21
1 ISAM CLI
configure xstp (FD 36p Ethernet LT (NELT-B)) configure xstp instance (FD 36p Ethernet LT (NELT-B)) configure xstp general enable-stp (FD 36p Ethernet LT (NELT-B)) configure xstp instance associate-vlan (FD 36p Ethernet LT (NELT-B)) configure xstp port priority (FD 36p Ethernet LT (NELT-B)) configure xstp port-instance instance (FD 36p Ethernet LT (NELT-B)) show alarm current megaco-media-gw (ISAM-V H248 : CLI enhancements) show alarm current megaco-plug-unit (ISAM-V H248 : CLI enhancements) show alarm current megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm current megaco-sig-lt (ISAM-V H248 : CLI enhancements) show alarm current megaco-term (ISAM-V H248 : CLI enhancements) show alarm current sip-user-agent (minor problem solving) show alarm current sync (NRNT-A CLI/TL1 Adaptation) show alarm log megaco-media-gw (ISAM-V H248 : CLI enhancements) show alarm log megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm log megaco-plug-unit (ISAM-V H248 : CLI enhancements) show alarm log megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm log megaco-sig-lt (ISAM-V H248 : CLI enhancements) show alarm log megaco-term (ISAM-V H248 : CLI enhancements) show alarm log sip-user-agent (minor problem solving) show alarm log sync (NRNT-A CLI/TL1 Adaptation) show alarm snap-shot megaco-media-gw (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-plug-unit (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-sig-gw (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-sig-lt (ISAM-V H248 : CLI enhancements) show alarm snap-shot megaco-term (ISAM-V H248 : CLI enhancements) show alarm snap-shot sip-user-agent (minor problem solving) show alarm snap-shot sync (NRNT-A CLI/TL1 Adaptation)
22
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show dhcp-relay v6-port-stats (IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan (IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan extensive (IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6summary (IPv6 Protocol Aware CC with DHCPv6 on FD) show ethernet statistics (FD 36p Ethernet LT (NELT-B)) show ethernet statistics line (FD 36p Ethernet LT (NELT-B)) show ipv6 (IPv6 Protocol Aware CC with DHCPv6 on FD) show ipv6 users ip-prefix (IPv6 Protocol Aware CC with DHCPv6 on FD) show linetest (ISAM-V H248 : CLI enhancements) show linetest cluster (ISAM-V H248 : CLI enhancements) show linetest cluster avail-sess (ISAM-V H248 : CLI enhancements) show linetest cluster lineid-ext-rept (ISAM-V H248 : CLI enhancements) show linetest cluster ltline lineid (ISAM-V H248 : CLI enhancements) show linetest cluster ltsession (ISAM-V H248 : CLI enhancements) show linetest single (ISAM-V H248 : CLI enhancements) show linetest single avail-sess (ISAM-V H248 : CLI enhancements) show linetest single lineid-ext-rept (ISAM-V H248 : CLI enhancements) show linetest single ltline lineid (ISAM-V H248 : CLI enhancements) show linetest single ltsession (ISAM-V H248 : CLI enhancements) show link-agg (FD 36p Ethernet LT (NELT-B)) show link-agg group-info (FD 36p Ethernet LT (NELT-B)) show link-agg member-port port (FD 36p Ethernet LT (NELT-B)) show link-agg port-info (FD 36p Ethernet LT (NELT-B)) show qos interface-bandwidth (GPON support) show qos profile-usage bandwidth (GPON support) show qos profile-usage ingress-qos (GPON support) show qos profile-usage scheduler-node (GPON support) show qos statistics lt-queue (GPON support) show qos statistics lt-queue current-15min (GPON support) show qos statistics lt-queue prev-15min (GPON support) show qos tc-to-qmap (GPON support) show system sync-if-timing (NRNT-A CLI/TL1 Adaptation)
3HH-08079-DDCA-TCZZA 01
Released
23
1 ISAM CLI
show vlan fdb-board vlan-id (GPON support) show voice cluster ip (ISAM-V) show voice cluster signal-gateway (ISAM-V) show xstp (FD 36p Ethernet LT (NELT-B)) show xstp bridge (FD 36p Ethernet LT (NELT-B)) show xstp instance (FD 36p Ethernet LT (NELT-B)) show xstp port (FD 36p Ethernet LT (NELT-B)) show xstp port-instance instance (FD 36p Ethernet LT (NELT-B)) Removed Commands configure mcast src (Fixed multicast VLAN per IGMP channel) configure mcast src packagemember (Fixed multicast VLAN per IGMP channel) configure qos profiles scheduler (GPON support) show qos profile-usage scheduler (GPON support) show vlan fdb mac (GPON support) show bridge port-to-atm-pvc (ISAM-V H248:CLI enhancements)
Command delta R4.1.02 versus R4.1 Modified Commands admin shdsl-seg unit-id (SHDSL evolution on NSLT-b) configure alarm entry (ADSLx/VDSL TPS-TC) configure shdsl segment unit-id (SHDSL evolution on NSLT-b) configure shdsl span (SHDSL evolution on NSLT-b) configure shdsl unit unit-id (SHDSL evolution on NSLT-b) configure trap manager (Sync Ethernet feature) show shdsl inventory (SHDSL evolution on NSLT-b) show shdsl segment-counters current-15min (SHDSL evolution on NSLT-b) show shdsl segment-counters current-1day (SHDSL evolution on NSLT-b) show shdsl segment-counters previous-15min (SHDSL evolution on NSLT-b) show shdsl segment-counters previous-1day (SHDSL evolution on NSLT-b) show shdsl segment-status (SHDSL evolution on NSLT-b) show shdsl unit-status (SHDSL evolution on NSLT-b) show system license (redundancy feature)
24
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
New Commands configure system shub icmp time-stamp-reply (minor problem solving)
Command delta R4.1 versus R4.0.02 Modified Commands admin bridge learned-unicast-mac (VLAN translation feature) admin system cpu-load (ISAM-V,SIP POTS statistics feature) configure alarm entry (new alarm SIP POTS statistics feature) configure equipment applique (NCFC-F sync ethernet feature) configure equipment external-link-assign (problem solving) configure igmp channel (IGMP forking application feature) configure igmp system (IGMP forking application feature) configure qos dsl-port queue (8 queue support on IFX feature) configure qos interface queue (8 queue support on IFX feature) configure qos profiles queue (8 queue support on IFX feature) configure qos shdsl-port queue (8 queue support on IFX feature) configure qos tc-map-dot1p (8 queue support on IFX feature) configure system (Management port on FD-REM) configure system security ssh access (mgmt security feature) configure vlan id (vMac in DHCP Option61 feature) configure voice sip vsp (minor problem solving) configure xdsl spectrum-profile adsl-adsl2 (annex-j masks ADLU-32/ADLU-48 feature) configure xdsl spectrum-profile adsl2-plus (annex-j masks ADLU-32/ADLU-48 feature) configure xdsl spectrum-profile vdsl (typeB and proxyversion) show equipment external-link-host (minor problem solving) show equipment temperature (minor problem solving) show l2cp partition (improvement) show system cpu-load (ISAM-V,SIP POTS statistics feature) show system memory-usage (ISAM-V,SIP POTS statistics feature) show vlan corss-connect (VLAN translation feature) show vlan fdb (VLAN translation feature) show voice sip termination (ISAM-V,SIP POTS statistics feature) show system license (SHDSL Evolution on NSLT-B) New Commands
3HH-08079-DDCA-TCZZA 01
Released
25
1 ISAM CLI
admin system security kill-debug (mgmt security feature) configure qos profiles shaper (8 queue support on IFX feature) configure system security peripheral-mgnt (Management port on FD-REM) configure vlan vlan-port (VLAN translation feature) configure voice sip termination tca (ISAM-V,SIP POTS statistics feature) show qos profile-usage shaper (8 queue support on IFX feature) show vlan residential-bridge summary (VLAN translation feature) show vlan residential-bridge extensive (VLAN translation feature) show voice sip statistics (ISAM-V,SIP POTS statistics feature) Removed Commands show bridge port (VLAN translation feature) show vlan port-vlan-map (VLAN translation feature) show vlan residential-bridge (VLAN translation feature)
Command delta R4.0.02 versus R4.0 (FGN 4.0) Modified Commands configure euipment applique (port numbering scheme feature) configure euipment external-link-assign (port numbering scheme feature) configure euipment external-link-host (port numbering scheme feature) configure ospf area interface md5key (minor problem solving) configure ospf nssa-area interface md5key (minor problem solving) configure ospf stub-area interface md5key (minor problem solving) configure ospf area interface metric (minor problem solving) configure ospf nssa-area interface metric (minor problem solving) configure ospf stub-area interface metric (minor problem solving) configure qos interface (minor problem solving) configure system security profile configure system security default-profile configure system security snmp community host-address configure system security snmp group security-level configure voice cluster equipment termination (minor problem solving) show equipment applique (port numbering scheme feature) show equiment diagnostics sfp (port numbering scheme feature)
26
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show equiment external-link-host (port numbering scheme feature) show vlan priority-regen (minor problem solving) show system license New Commands configure debug-trace show debug-sw sw-error-log Removed Commands configure debug (replaced by configure debug-trace) show config-data-port pppoe (fDR6 PPP termination) show xdsl config-data-port pppoe (fDR6 PPP termination) show debug sw-error-log (replaced by show debug-sw sw-error-log)
Command delta R4.0 (FGN 4.0) versus R3.7 (FGN 3.8) Modified Commands admin software-mngt shub (problem solving) configure alarm entry (new alarms entries for VSEM-C, removed not supported alarms) configure bridge (minor problem solving) configure bridge shub (problem solving) configure bridge port (problem solving) configure bridge port vlan-id (problem solving) configure ip vrf network-itf (problem solving) configure pppox-relay cross-connect client-port (problem solving) configure system (fDR6 Dual Ip@) configure system security snmp user (problem solving) configure system shub filter ip-filter icmp (problem solving) configure system shub filter ip-filter tcp (problem solving) configure voice cluster equipment board (ISAM-V) configure voice cluster equipment termination (ISAM-V) configure voice sip lineid-syn-prof (ISAM-V) configure voice sip vsp (ISAM-V) configure xdsl overrule-data (Rx Referred Virtual Noise in Upstream) show config-data-port bridge-port (problem solving) show oper-data-port bridge-port (problem solving) show equipment diagnostics sfp (problem solving)
3HH-08079-DDCA-TCZZA 01
Released
27
1 ISAM CLI
show system license (fDR6 PPP termination) show vlan priority-regen (problem solving) show xdsl config-data-port bridge-port (problem solving) show voice cluster board (problem solving) New Commands configure vlan pbit-statistics (P-bit traffic counters feature) show vlan pbit-statistics (P-bit traffic counters feature) Removed Commands admin software-mngt shub sw-package (problem solving) configure system shub entry ip (fDR6 Dual Ip@) configure system shub entry status (fDR6 Dual Ip@) configure system shub filter shub-manager (fDR6 Dual Ip@) configure system security snmp shub (fDR6 Dual Ip@) configure trap shub (fDR6 Dual Ip@) configure voice sip isdnbriline (ISAM-V) show voice sip isdnbriline (ISAM-V) show system shub entry ip (fDR6 Dual Ip@) show system shub filters shub-manager (fDR6 Dual Ip@)
Command delta R3.7 (FGN 3.8) versus R3.6 (FGN 3.7) Modified Commands admin rip interface md5-key (problem solving, command not backward compatible) configure alarm entry (new alarm types) configure alarm shub entry (new alarm type) configure bridge port (Mac@ overbooking feature) configure equipment applique (minor problem solving) configure equipment shelf (minor problem solving) configure igmp shub igs-system (Hitless redundancy feature) configure vlan id (8021ad transparent VLAN-CC feature) configure vlan shub id (8021ad transparent VLAN-CC feature) configure voice cluster media-gateway (monitor overload feature) configure voice sip server (ISAM-V SIP Mgnt) configure voice sip termination (ISAM-V SIP Mgnt, command not backward compatible) configure xdsl line (annex-J feature)
28
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure xdsl spectrum-profile (annex-J feature) configure xdsl spectrum-profile adsl-adsl2 (annex-J, DSL physical proprietary feature) configure xdsl spectrum-profile adsl2-plus (annex-J, DSL physical proprietary feature) configure xdsl spectrum-profile re-adsl (DSL physical proprietary feature) configure xdsl spectrum-profile vdsl (DSL physical proprietary feature) configure xdsl spectrum-profile vdsl2 (DSL physical proprietary feature) show equipment applique (minor problem solving) show system license (annex-J on NALT-F feature) show xdsl config-data-port (if-index) xdsl (annex-J on NALT-F feature) show xdsl oper-data-port (if-index) xdsl admin-state (annex-J on NALT-F feature) New Commands configure interface shub ip extfwd (External forwarding voice traffic feature) configure interface shub mirror (Port mirroring feature) configure pccp (dual link redundancy feature) configure voice sip isdnbriline (ISAM-V Isdn Basic call feature) configure voice sip lineid-syn-prof (ISAM-V LineID Profile syntax feature) configure voice sip user-agent (ISAM-V SIP Mgnt) configure voice sip user-agent-ap (ISAM-V SIP Mgnt) configure voice sip vsp (ISAM-V SIP Mgnt) show alarm current eqpt-holder-ext (ANSI AREM-A feature) show alarm log eqpt-holder-ext (ANSI AREM-A feature) show alarm snap-shot eqpt-holder-ext (ANSI AREM-A feature) show pccp (dual link redundancy feature) show voice sip isdnbriline (ISAM-V Isdn Basic call) show voice sip user-agent-ap (ISAM-V) Removed Commands configure voice sip user-agent-dhcp (ISAM-V) configure voice sip user-agent-manual (ISAM-V) configure pppoe (fDR6 PPP termination) configure system security ip-addr-pool (fDR6 PPP termination)
3HH-08079-DDCA-TCZZA 01
Released
29
1 ISAM CLI
show voice sip server-useragent (ISAM-V) show voice sip user-agent (ISAM-V) show voice sip dialplan (ISAM-V) show voice sip dialplan-useragent (ISAM-V) show voice sip termination-useragent (ISAM-V) show alarm current sip-user-agent (ISAM-V) show alarm log sip-user-agent (ISAM-V) show alarm snap-shot sip-user-agent (ISAM-V) show pppoe (fDR6 PPP termination) show system security ip-addr-pool (fDR6 PPP termination)
Command delta R3.6 (FGN 3.7) versus R3.5 (FGN 3.6) Modified Commands admin equipment port (Remote aggregator feature) admin mstp port (Remote aggregator feature) configure alarm entry (obsolete alarm removed,new alarm added) configure alarm shub entry (new alarms added) configure bridge shub port (Remote aggregator feature,minor problem solving) configure cluster port (Remote aggregator feature) configure dhcp-relay shub server (obsolete replaced by configure dhcp-relay shub instance server,MVRF feature) configure dhcp-relay shub agent (obsolete replaced by configure dhcp-relay shub instance,MVRF feature) configure equipment external-link-assign (Remote aggregator feature) configure equipment external-link-host (Remote aggregator feature) configure equipment slot (FD REM feature) configure igmp shub vlan-router-port network-port (Remote aggregator feature,minor problem solving) configure interface shub group port (Remote aggregator feature) configure interface shub port (Remote aggregator feature) configure ip shub vrf (MVRF feature) configure l2cp (ANCP partitioning feature) configure l2cp session (ANCP partitioning feature) configure la aggregator-port (Remote aggregator feature) configure mcast shub mcast-addr vlan-id (Remote aggregator feature) configure mstp port (Remote aggregator feature) configure mstp port-instance (Remote aggregator feature)
30
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure qos profiles session (IPoA_wE-IBridge feature) configure qos shub policer (Remote aggregator feature) configure qos shub queue-config (Remote aggregator feature) configure rip interface (MVRF feature) configure system (CDE framework feature) configure system shub filter ip-filter in-port (Remote aggregator feature) configure system shub filter ip-filter out-port (Remote aggregator feature) configure system shub filter ip-filter icmp in-port (Remote aggregator feature) configure system shub filter ip-filter icmp out-port (Remote aggregator feature) configure system shub filter ip-filter tcp in-port (Remote aggregator feature) configure system shub filter ip-filter tcp out-port (Remote aggregator feature) configure system shub filter ip-filter udp in-port (Remote aggregator feature) configure system shub filter ip-filter udp out-port (Remote aggregator feature) configure transport shub mac-infilter (Remote aggregator feature) configure transport shub rate-limit (Remote aggregator feature) configure vlan shub unicast-mac (Remote aggregator feature) configure vlan shub id egress-port (Remote aggregator feature) configure vlan shub id untag-port (Remote aggregator feature) configure voice cluster media-gateway (ISAM-V SIP QoS configurable DSCP and P-bit,ISAM-V SIP CDE profiles feature) configure voice cluster equipment termination (ISAM-V SIP QoS configurable DSCP and P-bit) configure voice sip user-agent-dhcp (ISAM-V SIP L2-L4 forwarding feature) configure voice sip user-agent-manual (ISAM-V SIP L2-L4 forwarding feature) show bridge network-port (Remote aggregator feature) show cluster connect (Remote aggregator feature) show cluster counter (Remote aggregator feature) show cluster neighbour (Remote aggregator feature) show equipment diagnostics sfp (Remote aggregator feature) show equipment external-link-host (Remote aggregator feature) show igmp shub vlan-router-port (Remote aggregator feature)
3HH-08079-DDCA-TCZZA 01
Released
31
1 ISAM CLI
show interface shub port (Remote aggregator feature) show interface shub statistics (Remote aggregator feature) show la aggregate-list (Remote aggregator feature) show la aggregator-info (Remote aggregator feature) show la network-port-info (Remote aggregator feature) show mcast shub igs-vlan-grp (Remote aggregator feature) show mstp network-port (Remote aggregator feature) show mstp port-instance (Remote aggregator feature) show system shub config-control (Remote aggregator feature) show system license (IPoA_wE-IBridge feature) show transport shub dot3-control (Remote aggregator feature) show transport shub dot3-pause (Remote aggregator feature) show transport shub dot3-status (Remote aggregator feature) show transport shub mac (Remote aggregator feature) show transport shub rate (Remote aggregator feature) show vlan shub-dup-mac-alarm (Remote aggregator feature) show vlan shub-port-vlan-map (Remote aggregator feature) show xdsl imp-noise-sensor far-end/near-end current/previous-interval/1day (minor problem solving) New Commands admin software-mngt cdeprof (ISAM-V SIP CDE profiles feature) admin trouble-shooting (troubleshooting counters feature) admin voice (ISAM-V) configure dhcp-relay shub instance (MVRF feature) configure dhcp-relay shub interface (MVRF feature) configure ipoa/e-iw (IPoA_wE-IBridge feature) configure l2cp user port (ANCP partitioning feature) configure trouble-shooting (troubleshooting counters feature) configure rip interface route-map (MVRF feature) configure voice sip system (ISAM-V SIP session timer) show alarm current lsmredundancy (ISAM-V switchover feature) show alarm log lsmredundancy (ISAM-V switchover feature) show alarm snap-shot lsmredundancy (ISAM-V switchover feature) show equipment temperature (retrieval temperature sensor feature) show ipoa/e-iw (IPoA_wE-IBridge feature) show l2cp partition (ANCP partitioning feature) show software-mngt cdeprof (ISAM-V SIP CDE profiles feature)
32
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show sytem cde-bitmap (CDE framework feature) show trouble-shooting (troubleshooting counters feature) show ip shub vrf-routing (MVRF feature)
Command delta R3.5 (FGN 3.6) versus R3.4.01 Modified Commands admin atm port (minor problem solving) admin alarm (ISAM-V feature) admin igmp mcast-src (obsolete replaced by admin igmp mcast-channel, igm ssm feature) configure alarm entry (ISAM-V feature,not supported alarms removed) configure alarm shub entry (MVRF feature,not supported alarms removed) configure cpe-management configure interface shub ip (vlan-id) ip-addr (enhancedIbridge feature) configure ip shub vrf (MVRF feature) configure ip shub vrf routing-option preference (MVRF feature,obsolete replaced by configure ip shub routing-option preference) configure mcast src (igmp ssm feature,obsolete replaced by configure mcast channel) configure ospf (MVRF feature) configure ospf stub-area (MVRF feature) configure ospf area interface metric (MVRF feature) configure rip (MVRF feature) configure pppox-relay cross-connect engine (pppoe relay with mac@ concentration feature) configure pppox-relay cross-connect client-port (pppoe relay with mac@ concentration feature) configure system clock-mgmt (minor problem solving) configure system security snmp community host-address (ISAM-V feature) configure system security snmp group (ISAM-V feature) configure system security snmp manager (ISAM-V feature) configure trap manager (enhancedIbridge feature) configure trap definition (enhancedIbridge feature) configure vlan id (enhancedIBridge feature) configure voice sip server (VoIP-SIP feature)
3HH-08079-DDCA-TCZZA 01
Released
33
1 ISAM CLI
configure xdsl line (XDSL impulse noise sensor feature) configure interface shub ip (vlan-id) ip-addr (enhancedIbridge feature) show igmp grp-to-package (igmp ssm feature) show pppox-relay cross-connect statistics client-port (pppoe relay with mac@ concentration feature) show pppox-relay cross-connect monitor-statistics client-port (pppoe relay with mac@ concentration feature) show pppox-relay cross-connect session client-port (pppoe relay with mac@ concentration feature) show system license (xdsl per line config feature,xdsl impulse noise sensor) show ospf redistributed-route (minor problem solving) show rip routing-table (minor problem solving) show xdsl config-data-port xdsl (xdsl per line config feature) show xdsl config-data-port pppox-relay (pppoe relay with mac@ concentration feature) show xdsl oper-data-port xdsl (xdsl per line config feature) show igmp shub igs-stats (not backward compatible,display-elem tx-igmp-drop-pkts renamed to rx-igmp-drop-pkts) show equipment protection-group (not backward compatible, display-elem lanx-failure renamed to shub-failure) New Commands admin igmp mcast-channel (IGMP SSM feature) admin arp-relay-stats (enhancedIBridge feature) configure bridge port (port) vlan-id (index) static-user (enhancedIbridge feature) configure cfm (Connectivity Fault Management feature) configure arp-relay (enhancedIBridge feature) configure ip shub vrf arp (MVRF feature) configure ip shub routing-option preference (MVRF feature) configure mcast channel (igmp ssm feature) configure voice cluster (VoIP-SIP feature) configure xdsl overrule-data (xdsl per line config feature) configure xdsl imp-noise-sensor (XDSL impulse noise sensor feature) debug-command (customer debugging feature) show alarm shub snap-shot forwarding (MVRF feature) show alarm shub snap-shot global-fwd (MVRF feature) show alarm shub snap-shot global-ospf (MVRF feature) show alarm shub snap-shot global-rip (MVRF feature)
34
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show arp-relay-stats (enhancedIBridge feature) show cfm (Connectivity Fault Management feature) show dhcp-relay session (enhancedIBridge feature) show igmp module-mcast-channel (igmp ssm feature) show voice cluster (VoIP-SIP feature) show xdsl imp-noise-sensor (XDSL impulse noise sensor feature) Deleted Commands show alarm log ipox (not supported alarm removed) show alarm current ipox (not supported alarm removed) show alarm snap-shot ipox (not supported alarm removed)
Command delta R3.4.01 (FGN 3.5.01) versus R3.4 (FGN 3.5) Modified Commands configure system shub filter ip-filter port-filter (obsolete cmd replaced by 'configure system shub filter ip-filter in-port' and 'configure system shub filter ip-filter out-port' show qos statistics ltcos (replaced by show qos statistics lt-cos) configure qos tca (index) queue (minor problem solving) configure equipment slot (minor problem solving) configure interface port (minor problem solving) configure system shub filter ip-filter tcp (minor problem solving) configure transport shub mac-filter (obsolete cmd replaced by 'configure transport shub mac-infilter') configure qos dsl-port show transport shub mac (minor problem solving) New Commands show qos statistics lt-cos configure transport shub mac-infilter
Command delta R3.4 (FGN 3.5) versus R3.3.02 (FGN 3.4.01) Modified Commands admin equiment slot (REM 48lines vdls2 feature) configure alarm entry (new alarm entries) configure alarm shub entry (new alarm entries) configure atm pvc (encap auto detect feature)
3HH-08079-DDCA-TCZZA 01
Released
35
1 ISAM CLI
configure dhcp-relay agent (minor problem solving) configure equipment slot (REM 48lines vdls2 feature) configure igmp channel (IGMP antispoof support feature) configure interface port (efm bonding feature) configure ip shub arp (4k static route feature) configure qos tca (index) queue (minor problem solving) configure trap manager (monitor lt restart feature) configure vlan id (virtual mac feature) configure xdsl line (UPBO feature,efm boding feature) configure xdsl spectrum-profile vdsl (UPBO feature) configure xdsl spectrum-profile vdsl2 (psd shaping feature) configure xdsl-bonding group-profile (minor problem solving) show equipment slot (REM 48lines vdls2 feature) show interface port (efm bonding feature) show interface stack (efm bonding feature) show interface test (efm bonding feature) show ip vrf-media (minor problem solving) show qos statistics buffer-overflow current-1day (REM 48lines vdls2 feature) show system license ( (UPBO feature) show xdsl config-data-port atm-pvc (encap auto detect feature) show xdsl config-data-port igmp (IGMP antispoof support feature) show xdsl config-data-port xdsl (UPBO feature,ef bonding feature) New Commands admin dhcp-relay port-stats (basic oam counters feature) admin dhcp-relay shub vrf-agent-stats (basic oam counters feature) admin ip arp-proxy-stats (basic oam counters feature) admin ip shub arp-stats (basic oam counters feature) admin system cpu-load (monitor cpu load feature) configure dhcp-relay port-stats (basic oam counters feature) configure efm-oam (link related eth oam feature) configure ip vrf (index) user-itf port (port-interface) arp-proxy-stats (basic oam counters feature) configure vlan vmac-address-format (virtual mac feature) configure xdsl dpbo-profile (UPBO feature) configure xdsl board dpbo-profile (UPBO feature) configure xdsl spectrum-profile vdsl pbo (UPBO feature)
36
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure xdsl spectrum-profile vdsl2 pbo (UPBO feature) show alarm current psc (itsc periodic pulsed sealing current feature) show alarm log psc (itsc periodic pulsed sealing current feature) show alarm snap-shot psc (itsc periodic pulsed sealing current feature) show debug (troubleshooting feature) show dhcp-relay port-stats (basic oam counters feature) show efm-oam ( (link related eth oam feature) show equipment diagnostics (sfp diagnostics feature) show ip arp-proxy-stats (basic oam counters feature) show ip shub arp-stats (basic oam counters feature) show ospf redistributed-route (new ospf requirement) show software-mngt (monitor sw version feature) show system cpu-load (monitor cpu load feature) show system memory-usage (monitor cpu load feature) show vlan vmac-bridge-port-fdb (virtual mac feature) Deleted Commands admin dhcp-relay user-port show dhcp-relay bridgeport show dhcp-relay port show ip shub arp
Command delta R3.3 (FGN 3.4) versus R3.1 (FGN 3.2)/R3.2 Modified Commands admin dhcp-relay user-port (multi-vlan feature) admin igmp channel (multi-vlan feature) admin ip vrf-stats interface user port (multi-vlan feature) configure alarm entry (new alarm types) configure bridge port vlan-id (multi-vlan feature) configure equipment protection-element (redundancy support for xVPS feature) configure equipment shelf (remote shelves feature) configure igmp channel (multi-vlan feature) configure igmp shub vlan-router-port (multi-vlan feature) configure igmp shub igs-system (igmpV3 feature) configure igmp shub vlan-filter (igmpV3 feature) configure igmp system (igmpV3 feature)
3HH-08079-DDCA-TCZZA 01
Released
37
1 ISAM CLI
configure interface alarm (ethernet LT feature) configure interface port (multi-vlan feature) configure ip vrf route-dest (multi-vlan feature) configure mcast shub mcast-addr vlan-id (SFPs for remote eqpt) configure ip vrf user-itf (multi-vlan feature) configure pppoe pppox-interface (multi-vlan feature) configure qos (cac parameter added) configure qos dsl-port (minor problem solving) configure qos dsl-port queue (minor problem solving) configure qos shdsl-port (minor problem solving) configure qos shdsl-port queue (minor problem solving) configure software-mngt oswp (auto-activation feature) configure system security ssh access (auto-activation feature) configure system shub ip-filter (SFPs for remote eqpt) configure system syslog destination (syslog for video cdr feature) configure system syslog route (syslog for video cdr,protocol tracing features) configure transport shub mac-filter (SFPs for remote eqpt) configure vlan (multi-vlan feature) configure vlan port-protocol (multi-vlan feature) configure vlan shub id egress-port (SFPs for remote eqpt) configure voice sip digitmap (VoIP-SIP feature) configure voice sip server (VoIP-SIP feature) configure voice sip termination (VoIP-SIP feature) configure voice sip user-agent-dhcp (VoIP-SIP feature) configure voice sip user-agent-manual (VoIP-SIP feature) configure xdsl line service-profile spectrum-profile configure xdsl spectrum-profile vdsl configure xdsl spectrum-profile vdsl2 configure xdsl-bonding group show equipment protection-element (redundancy support for xVPS feature) show dhcp-relay port (multi-vlan feature) show igmp channel counter (multi-vlan feature) show igmp channel miscellaneous (multi-vlan feature) show interface alarm (ethernet LT feature) show interface availability (ethernet LT feature) show interface port (multi-vlan,ethernet LT features)
38
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show interface stack (multi-vlan,ethernet LT features) show interface test (multi-vlan,ethernet LT features) show ip dhcp-session (multi-vlan feature) show ip vrf-interface user port (multi-vlan feature) show mcast active-groups (multi-vlan feature) show mcast shub igs-vlan-grp (SFPs for remote eqpt) show pppoe connection (multi-vlan feature) show pppoe if-table (multi-vlan feature) show pppoe ppp-statistics (multi-vlan feature) show pppoe session (multi-vlan feature) show pppoe statistics-pppoe-itf rx-pkt (multi-vlan feature) show pppoe statistics-pppoe-itf stats (multi-vlan feature) show pppoe statistics-pppoe-itf tx-pkt (multi-vlan feature) show vlan port-vlan-map (abstract lower layer feature) show voice sip server (VoIP-SIP feature) show voice sip server-useragent (VoIP-SIP feature) show vlan shub-dup-mac-alarm (SFPs for remote eqpt) show vlan shub-port-vlan-map (SFPs for remote eqpt) show xdsl config-data-port (all cmds in node) (multi-vlan feature) show xdsl oper-data-port (all cmds in node) (multi-vlan feature) New Commands admin igmp shub cac clear-stats admin igmp shub vlan clear-stats admin ip vlan-itf-delete admin mstp port (mstp feature) configure debug protocol-trace (protocol tracing feature) configure equipment envbox (environment monitoring feature) configure equipment external-link-assign configure ethernet line (ethernet LT feature) configure igmp vlan (multi-vlan feature) configure igmp shub vlan-enhance-perf (multi-vlan feature) configure igmp system cdr-type (syslog video cdr feature) configure interface shub ip unnumbered-as (mgmt via loop-back itf feature) configure mstp (all cmds in this node) (mstp feature) configure qos interface (QoS settings on a user-port Interface) configure software-mngt database (database automatic activation and
3HH-08079-DDCA-TCZZA 01
Released
39
1 ISAM CLI
backup feature) configure system security filetransfer (ftp for backup-restore and sw download) configure voice sip termination local-loop (VoIP-SIP feature) configure xdsl spectrum-profile artificial-noise-down (xdsl artificial noise feature) ping vrf (ping per VRF feature) show alarm current ether-sfp show alarm current ether-tca show alarm current external-device show alarm current filetransfer show alarm current l2forward show alarm current qos-queue show alarm current qos-slot show alarm log ether-sfp show alarm log ether-tca show alarm log external-device show alarm log filetransfer show alarm log l2forward show alarm log qos-queue show alarm log qos-slot show alarm snap-shot ether-sfp show alarm snap-shot ether-tca show alarm snap-shot external-device show alarm snap-shot filetransfer show alarm snap-shot l2forward show alarm snap-shot qos-queue show alarm snap-shot qos-slot show config-data-port (all cmds in this node) (ethernet LT feature) show ethernet (ethernet LT feature) show igmp channel protocol (igmpV3 feature) show igmp grp-to-package (igmpV3 feature) show igmp shub igs-stats (igmpV3 feature) show mcast grp-membership (igmpV3 feature) show mstp (all cmds in node) (mstp feature) show oper-data-port (all cmds in node) (ethernet LT feature) show qos ethernet-bandwidth (ethernet LT feature) show transport ether-dot3lt (ethernet LT feature)
40
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show transport ether-ifsfplt (ethernet LT feature) show transport ether-ifmault (ethernet LT feature) traceroute vrf (traceroute per VRF feature) Removed Commands admin bridge rstp port (replaced by mstp cmd) admin igmp shub clear-stats (replaced by admin igmp shub cac clear-stats) configure rstp (replaced by mstp cmds) configure voice sip local-loop (replaced by configure voice sip termination local-loop) show alarm current sip-app-server (not applicable anymore) show alarm log sip-app-server (not applicable anymore) show alarm snap-shot sip-app-server (not applicable anymore) show rstp (replaced by mstp cmds)
Command delta R3.1 (FGN 3.2)/R3.2 versus R2.5 Modified Commands admin alarm admin equipment admin equipment slot admin ip vrf-media admin shdsl-seg configure alarm entry configure cpe-management vlan-id proxy-mode configure dhcp-relay agent configure equipment shelf configure equipment slot configure mcast src (IGMP CAC for GE port,garanteed LT part) configure mcast shub active-streams (IGMP CAC feature) configure qos profiles session logical-flow-type configure software-mngt oswp (autofetch obsolete parameter) configure system id (feature config port nbr in protocol) configure system security profile (numbering scheme feature) configure system security default-profile (numbering scheme feature) configure system security ssh access configure system sntp (timezone feature) configure trap definition
3HH-08079-DDCA-TCZZA 01
Released
41
1 ISAM CLI
configure trap manager configure vlan id (programmable ciruit-id dhcp,pppoe) configure vlan shub unicast-mac configure interface alarm configure shdsl span configure shdsl segment configure shdsl unit configure xdsl service profile (L2-L3 power modes) configure xdsl spectrum profile (SRA fct added) configure xdsl spectrum profile adsl2-plus ( (PSD functionality) configure xdsl spectrum profile vdsl ( (PSD functionality) configure xdsl spectrum profile vdsl2 ( (PSD functionality) configure xdsl line service-profile spectrum-profile configure xdsl-bonding group-profile environment show atm pvc show vlan bridge-port-fdb show vlan cross-connect show vlan residential-bridge show vlan shub-dup-mac-alarm show interface alarm show interface port show interface stack show interface test show ip ip-statistics show transport ether-dot3 show shdsl inventory show shdsl segment-counters show shdsl segment-status show shdsl unit-status New Commands admin igmp shub bundle (IGMP CAC feature) admin igmp shub clear-stats admin igmp shub mcast-src vlan-id (IGMP CAC feature) admin session id disconnect admin system syslog admin system security ssh generate-key (see removed command
42
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure system security ssh key-regen) configure alarm custom-profile (REM feature) configure bridge shub mac-learning configure cpe-management manager configure igmp shub bundle configure mcast shub src vlan-id configure qos-dsl-ctrl-pkt-policer configure system id-syntax (atm/eth based id) configure system syslog (security system log feature) configure xdsl spectrum-profile adsl2-plus cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl cust-rx-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 cust-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl2 cust-rx-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 v-noise-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl2 v-noise-psd-pt-up (PSD fct) configure xdsl-bonding group-assembly-time (bonding feature) configure xdsl-bonding group link show alarm current custom-ext-alarm show alarm log custom-ext-alarm show alarm snap-shot custom-ext-alarm show alarm snap-shot plug-in-unit-ext show cpe-management snmpproxy-statistics show igmp shub bundle-stats show igmp shub bundle-to-src show igmp shub mcast-stats show igmp shub system-stats show ip dhcp-session show ip shub vrf-media show system syslog show xdsl config-data-port show xdsl oper-data-port show xdsl bonding failure-status group show xdsl bonding operational-data group show xdsl bonding summary traceroute
3HH-08079-DDCA-TCZZA 01
Released
43
1 ISAM CLI
Removed Commands admin ip traceroute (replaced by traceroute) configure cpeproxy proxy-mode (replaced by configure cpe-management proxy-mode) configure system security ssh key-regen (replaced by admin system security ssh generate-key) not backward compatible show alarm entry (redundant with info configure alarm entry) show alarm shub entry (redundant with info configure alarm shub entry) show cpeproxy show ip traceroute (replaced by traceroute) show alarm snap-shot plugin-unit-ext (replaced by show alarm snap-shot plug-in-unit-ext) configure system management vlan host-ip-address Commands applicable from R3.2 on configure shdsl (all cmds in node) configure voice sip (VoIP-SIP feature) configure ima (all cmds in node) show shdsl (all cmds in node) show ima (all cmds in node) show alarm current ima-group show alarm current ima-link show alarm current shdsl show alarm current shdsl-isam show alarm log ima-group show alarm log ima-link show alarm log shdsl show alarm log shdsl-isam show alarm snap-shot ima-group show alarm snap-shot ima-link show alarm snap-shot shdsl show alarm snap-shot shdsl-isam show alarm current sip-app-server show alarm current sip-plugin-unit show alarm current sip-termination show alarm current sip-user-agent show alarm log sip-app-server show alarm log sip-plugin-unit
44
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show alarm log sip-termination show alarm log sip-user-agent show alarm snap-shot sip-app-server show alarm snap-shot sip-plugin-unit show alarm snap-shot sip-termination show alarm snap-shot sip-user-agent show voice show voice sip
Command delta R3.1 (FGN 3.2)/R3.2 versus R2.4.01 (FGN 3.0.04) Modified Commands admin alarm admin equipment admin equipment slot admin ip vrf-media admin rip interface md5-key admin software-mngt shub configure alarm entry configure dhcp-relay agent configure equipment shelf configure equipment slot configure mcast src (IGMP CAC for GE port,garanteed LT part) configure mcast shub active-streams (IGMP CAC feature) configure qos profiles session logical-flow-type configure software-mngt oswp (autofetch obsolete parameter) configure system id (feature config port nbr in protocol) configure system security profile (numbering scheme feature) configure system security default-profile (numbering scheme feature) configure system security ssh access configure system sntp (timezone feature) configure system transaction configure trap definition configure trap manager configure vlan id (programmable ciruit-id dhcp,pppoe) configure vlan shub unicast-mac configure interface alarm configure interface shub ip icmp
3HH-08079-DDCA-TCZZA 01
Released
45
1 ISAM CLI
configure ip shub vrf configure ppox-relay cross-connect engine configure qos shub flow configure rip interface md5-key configure xdsl service profile (L2-L3 power modes) configure xdsl spectrum profile (SRA fct added) configure xdsl spectrum profile adsl2-plus ( (PSD functionality) configure xdsl spectrum profile vdsl ( (PSD functionality) configure xdsl spectrum profile vdsl2 ( (PSD functionality) configure xdsl line service-profile spectrum-profile configure xdsl-bonding group-profile environment show atm pvc show vlan bridge-port-fdb show vlan cross-connect show vlan residential-bridge show vlan shub-dup-mac-alarm show vlan fdb show interface alarm show interface port show interface stack show interface test show ip ip-statistics show transport ether-dot3 New Commands admin igmp shub bundle (IGMP CAC feature) admin igmp shub clear-stats admin igmp shub mcast-src vlan-id (IGMP CAC feature) admin ip vrf-stats interface user bridgeport admin shdsl-seg unit-id admin session id disconnect admin system syslog admin system security ssh generate-key configure alarm custom-profile (REM feature) configure bridge shub mac-learning configure cpe-management vlan-id proxy-mode configure cpe-management manager
46
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure cpe-management session configure cpe-management shub configure igmp shub bundle configure mcast shub src vlan-id configure qos-dsl-ctrl-pkt-policer configure qos shdsl-port configure system id-syntax (atm/eth based id) configure system syslog (security system log feature) configure xdsl spectrum-profile adsl2-plus cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl cust-rx-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 cust-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl2 cust-rx-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 v-noise-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl2 v-noise-psd-pt-up (PSD fct) configure xdsl-bonding group-assembly-time (bonding feature) configure xdsl-bonding group link show alarm current plugin-unit-ext show alarm current custom-ext-alarm show alarm current sip-user-agent show alarm log plugin-unit-ext show alarm log custom-ext-alarm show alarm snap-shot plugin-unit-ext show cpe-management show equipment capab-profile show qos shdsl-bandwidth show igmp shub bundle-stats show igmp shub bundle-to-src show igmp shub mcast-stats show igmp shub system-stats show ip dhcp-session show ip shub vrf-media show system syslog show xdsl config-data-port show xdsl oper-data-port show xdsl bonding failure-status group
3HH-08079-DDCA-TCZZA 01
Released
47
1 ISAM CLI
show xdsl bonding operational-data group show xdsl bonding summary traceroute Removed Commands admin ip traceroute (replaced by traceroute) configure cpeproxy proxy-mode configure system security ssh key-regen (replaced by admin system security ssh generate-key) not backward compatible show cpeproxy show ip traceroute (replaced by traceroute) configure system management vlan host-ip-address show tech-support Commands applicable from R3.2 on configure shdsl configure ima configure voice sip show shdsl show ima show alarm current ima-group show alarm current ima-link show alarm current shdsl show alarm current shdsl-isam show alarm current custom-ext-alarm show alarm current sip-app-server show alarm current sip-plugin-unit show alarm current sip-termination show alarm current sip-user-agent show alarm log ima-group show alarm log ima-link show alarm log shdsl show alarm log shdsl-isam show alarm log sip-app-server show alarm log sip-plugin-unit show alarm log sip-termination show alarm log sip-user-agent show alarm snap-shot ima-group
48
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show alarm snap-shot ima-link show alarm snap-shot shdsl show alarm snap-shot shdsl-isam show alarm snap-shot sip-app-server show alarm snap-shot sip-plugin-unit show alarm snap-shot sip-termination show alarm snap-shot sip-user-agent show ima show shdsl show voice
Command delta R3.1 (FGN 3.2)/R3.2 versus R2.4.11 (FGN 3.0.02) Modified Commands admin alarm admin equipment admin equipment slot admin ip vrf-media admin rip interface md5-key configure alarm entry configure dhcp-relay agent configure equipment shelf configure equipment slot configure igmp package configure interface port configure mcast src (IGMP CAC for GE port,garanteed LT part) configure mcast shub active-streams (IGMP CAC feature) configure qos profiles session logical-flow-type configure rip route-map configure system clock-mgmt configure system shub filter ip-filter icmp configure system shub filter ip-filter port-filter configure system shub filter ip-filter tcp configure system shub filter ip-filter udp configure system id (feature config port nbr in protocol) configure system radius configure system security profile (numbering scheme feature) configure system security default-profile (numbering scheme feature)
3HH-08079-DDCA-TCZZA 01
Released
49
1 ISAM CLI
configure system security ssh access configure system sntp (timezone feature) configure system transaction configure trap manager configure trap definition configure vlan broadcast-frames configure vlan id (programmable ciruit-id dhcp,pppoe) configure vlan shub unicast-mac configure interface alarm configure interface shub ip icmp configure ip shub vrf configure ppox-relay cross-connect engine configure qos shub flow configure rip interface md5-key configure xdsl service profile (L2-L3 power modes) configure xdsl spectrum profile (SRA fct added) configure xdsl spectrum profile adsl2-plus ( (PSD functionality) configure xdsl spectrum profile vdsl ( (PSD functionality) configure xdsl spectrum profile vdsl2 ( (PSD functionality) configure xdsl line service-profile spectrum-profile configure xdsl-bonding group-profile environment show atm pvc show vlan bridge-port-fdb show vlan cross-connect show vlan residential-bridge show vlan shub-dup-mac-alarm show vlan fdb show interface alarm show interface port show interface stack show interface test show ip ip-statistics show transport ether-dot3 New Commands admin igmp shub bundle (IGMP CAC feature) admin igmp shub clear-stats
50
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
admin igmp shub mcast-src vlan-id (IGMP CAC feature) admin ip vrf-stats interface user bridgeport admin shdsl-seg unit-id admin session id disconnect admin system syslog admin system security ssh generate-key configure alarm custom-profile (REM feature) configure bridge shub mac-learning configure cpe-management vlan-id proxy-mode configure cpe-management manager configure cpe-management session configure cpe-management shub configure igmp shub bundle configure l2cp configure mcast shub src vlan-id configure ospf area configure ospf nssa-area configure qos-dsl-ctrl-pkt-policer configure qos shdsl-port configure system id-syntax (atm/eth based id) configure system syslog (security system log feature) configure xdsl spectrum-profile adsl2-plus cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl cust-rx-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 cust-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 cust-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl2 cust-rx-psd-pt-up (PSD fct) configure xdsl spectrum-profile vdsl2 v-noise-psd-pt-down (PSD fct) configure xdsl spectrum-profile vdsl2 v-noise-psd-pt-up (PSD fct) configure xdsl-bonding group-assembly-time (bonding feature) configure xdsl-bonding group link show alarm current plugin-unit-ext show alarm current custom-ext-alarm show alarm current sip-user-agent show alarm log plugin-unit-ext show alarm log custom-ext-alarm show alarm snap-shot plugin-unit-ext
3HH-08079-DDCA-TCZZA 01
Released
51
1 ISAM CLI
show cpe-management show equipment capab-profile show dhcp-relay bridgeport show qos shdsl-bandwidth show igmp shub bundle-stats show igmp shub bundle-to-src show igmp shub mcast-stats show igmp shub system-stats show ip dhcp-session show ip shub vrf-media show interface shub statistics show l2cp show system syslog show vlan qos-cvlan-list show xdsl config-data-port show xdsl link-up-changes show xdsl linkup-record show xdsl oper-data-port show xdsl bonding failure-status group show xdsl bonding operational-data group show xdsl bonding summary traceroute Removed Commands admin ip traceroute (replaced by traceroute) configure cpeproxy proxy-mode configure system security ssh key-regen (replaced by admin system security ssh generate-key) not backward compatible show alarm entry show alarm shub entry show cpeproxy show ip traceroute (replaced by traceroute) show tech-support Commands applicable from R3.2 on configure shdsl configure ima configure voice sip
52
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show shdsl show ima show alarm current ima-group show alarm current ima-link show alarm current shdsl show alarm current shdsl-isam show alarm current custom-ext-alarm show alarm current sip-app-server show alarm current sip-plugin-unit show alarm current sip-termination show alarm current sip-user-agent show alarm log ima-group show alarm log ima-link show alarm log shdsl show alarm log shdsl-isam show alarm log sip-app-server show alarm log sip-plugin-unit show alarm log sip-termination show alarm log sip-user-agent show alarm snap-shot ima-group show alarm snap-shot ima-link show alarm snap-shot shdsl show alarm snap-shot shdsl-isam show alarm snap-shot sip-app-server show alarm snap-shot sip-plugin-unit show alarm snap-shot sip-termination show alarm snap-shot sip-user-agent show ima show shdsl show voice
Command delta R2.5 versus R2.4.01 (FGN 3.0.04) Modified Commands admin equipment slot admin rip interface admin software-mngt shub configure alarm entry (new alarm types)
3HH-08079-DDCA-TCZZA 01
Released
53
1 ISAM CLI
configure bridge port vlan-id configure cpeproxy configure equipment slot configure interface port configure interface shub ip icmp configure ip vrf route-dest next-hop configure pppox-relay cross-connect engine configure qps shub flow configure rip interface configure system transaction configure system security radius show vlan fdb New Commands admin ip vrf-stats interface user bridgeport admin shdsl-seg configure cpe-management configure cpe-management shub configure ima configure qos shdsl-port configure shdsl segment configure shdsl span configure shdsl unit show alarm current ima-group show alarm current ima-link show alarm current plugin-unit-ext show alarm current shdsl show alarm current shdsl-isam show alarm log ima-group show alarm log ima-link show alarm log plugin-unit-ext show alarm log shdsl show alarm log shdsl-isam show alarm snap-shot ima-group show alarm snap-shot ima-link show alarm snap-shot plugin-unit-ext show alarm snap-shot shdsl show alarm snap-shot shdsl-isam
54
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show cpe-management show cpe-management ipproxy-statistic show equipment capab-profile show ima group show ima group counters show ima group state show ima link show ima link counters show ima link state show qos shdsl-bandwidth show shdsl show shdsl inventory show shdsl segment-counters show shdsl segment-status show shdsl span-counters show shdsl span-status show shdsl unit-status Deleted Commands show tech-support
Command delta R2.4.11 (FGN 3.0.02) versus R2.4 (FGN 3.0) and Command delta R2.4.11 (FGN 3.0.02) versus R2.4.10 (FGN3.0.01) Modified Commands configure system shub entry ip configure system shub filter ip-filter port-filter configure system shub filter ip-filter icmp configure system shub filter ip-filter tcp configure system shub filter ip-filter udp configure xdsl spectrum-profile vdsl configure xdsl spectrum-profile vdsl2
Command delta R2.4.01 (FGN 3.0.04) versus R2.4 (FGN 3.0) Modified Commands admin software-mngt shub select-config configure equipment shelf
3HH-08079-DDCA-TCZZA 01
Released
55
1 ISAM CLI
configure equipment slot configure igmp package configure rip route-map configure software-mngt oswp configure system clock-mgmt configure system security radius configure system shub entry ip configure system shub filter ip-filter port-filter configure system shub filter ip-filter icmp configure system shub filter ip-filter tcp configure system shub filter ip-filter udp configure trap manager configure vlan configure vlan shub unicast-mac configure xdsl spectrum-profile vdsl configure xdsl spectrum-profile vdsl2 environment New Commands configure ospf area extern-aggr-addr configure l2cp show l2cp configure system management vlan show dhcp-relay bridgeport show interface shub statistics show xdsl link-up-changes show xdsl linkup-record show vlan qos-cvlan-list Deleted Commands show alarm entry show alarm entry shub
Command delta R2.4 (FGN 3.0) versus R2.3.02 Modified Commands admin igmp configure dhcp-relay agent
56
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
configure igmp system src-ip-address configure mcast src configure system security snmp community configure system security snmp group security level configure system shub entry ip configure vlan id configure vlan shub unicast-mac configure xdsl service-profile configure xdsl spectrum-profile name configure xdsl spectrum-profile adsl-adsl2 configure xdsl spectrum-profile re-adsl configure xdsl spectrum-profile adsl2-plus configure xdsl spectrum-profile vdsl configure xdsl line environment New Commands configure system clock-mgmt configure system security default-profile configure system security notify-profile filter configure system security snmp view configure system security snmp notify-view show igmp package-to-src show mcast active-groups show system clock-mgmt show tech-support
Deleted Commands show vlan qos-cvlan-list show dhcp-relay bridgeport
Command delta R2.3.02 versus R2.2.03 (FGN2.0.02) Modified Commands admin sntp configure igmp shub igs-system configure interface shub ip
3HH-08079-DDCA-TCZZA 01
Released
57
1 ISAM CLI
configure ip vrf configure igmp shub igs-system configure la aggregator-port configure qos configure qos profiles marker configure qos shub meter configure qos shub flow configure qos shub queue-config configure system configure system security profile configure system security radius configure system security snmp configure system shub entry ip configure trap configure vlan configure vlan shub configure xdsl service-profile configure xdsl spectrum-profile configure xdsl line environment show mcast shub igs-vlan-grp show security radius show vlan fdb New Commands configure cluster configure equipment external-link-host configure mcast shub configure cluster configure qos shub dscp-map-dot1p configure system security ssh configure xdsl line (if-index) local-loop show alarm current sfp show alarm log sfp show alarm snap-shot sfp show cluster show dhcp-relay bridgeport show equipment external-link-host
58
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
show equipment external-link-remote show mcast shub active-streams show qos profile-usage show security ssh show tranport snmp engine show tranport snmp protocol-stats show vlan shub-nr-mcast-entries Deleted Commands configure ip interface configure system shub entry software configure system shub sntp server-ip-addr
3HH-08079-DDCA-TCZZA 01
Released
59
1 ISAM CLI
1.2 Preface Scope This user guide describes the Command Line Interface (CLI) commands supported by the Alcatel-Lucent 7302 ISAM, 7330 ISAM FTTN and 7360 ISAM. These commands are used for installation, configuration, management and troubleshooting.
User Profile The guide is intended for operating personnel (sometimes called craft persons).
The CLI Structure The ISAM CLI is a command-driven interface accessible via telnet or via the craft terminal. The CLI can be used to configure and manage ISAM equipment.
60
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.3 CLI Commands Command Types The commands of the CLI language can be divided into two groups: global and environmental commands. Global commands (such as the logout command) can be entered in any context and have the same effect in each context. Environmental commands (such as the info command) can only be entered in some contexts (for example, the info command cannot be used in the show node) and have a different effect in each context. The purpose of the command (for example, showing the configuration) is the same but the implementation or the generated output is different. Some commands are also implicit. For example, when you enter only the node name configure system security snmp community fden, you run an implicit command that changes your context to the specified node and that creates this node if it did not previously exist. The available commands are discussed in a separate chapter.
Access Rights Not every operator can execute every command. Access to commands is granted via the operator profile. It is possible that an operator can execute a given command in one context and not in another.
Options and Parameters Commands can have options and parameters. Options are special parameters that are context insensitive. For example, you can enter the option detail after info in any context. Options must be given at the end of the command preceeding the filter and printer specifications.
3HH-08079-DDCA-TCZZA 01
Released
61
1 ISAM CLI
1.4 Nodes Node Definition A command definition tree, further abbreviated to "command tree" is a structure of nested command nodes from which CLI commands can be derived. A command node consists of a node name and zero or more resource identifiers. The resource identifiers behave like parameters, but identify a particular resource. For example, public in configure system security snmp community public is an unnamed resource identifier of the node community. One such command node identifies a context. A CLI command can be derived from a command tree starting from the root node, but a command with the same meaning and impact can also be derived from a lower level node or subnode. The following are examples of equivalent commands: • info configure system security snmp community public in any node. • info system security snmp community public in node configure • info security snmp community public in node configure system • info snmp community public in node configure system security • info community public in node configure system security snmp • info in node configure system security snmp community public The root node is the highest level. Directly below the root node are important command nodes such as configure and show.
Node Creation A dynamic node is a sub-node of the configure node that corresponds to a configurable resource that an operator can create. An operator can create a dynamic node by navigating to it. The system will automatically create the node. The operator can configure its prompt in such a way that it shows if the operator navigated to an existing or a new node. The ability to create nodes is limited by the access rights of the user. It is also possible that the system creates additional subnodes in other nodes, for example, in the show node due to the creation of a new dynamic node in the configure node.
Node Deletion A dynamic node can be deleted by placing no in front of the node name. For example, configure system security snmp no community public deletes the specified node and all its subnodes. The ability to delete nodes is limited by the access rights of the operator.
Resource Attributes The value of resource attributes can be changed by entering the name of the resource attribute followed by the new value. For example, password plain:secret sets the value of the resource attribute named password to the plain text string secret. Resource attributes can be set to their default value by entering no followed by the name of the resource attribute. For example, no password sets the value of the resource attribute named password to the default value (no password required).
62
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.5 Parameters Named and Unnamed Parameters Parameters are characterised by a name and a type. Parameters can be named or unnamed. Named parameters are entered as two tokens: a keyword and a value (for example, password plain:secret). Some commands (such as info) require only the keyword. Only the value token is entered for unnamed parameters (for example, public in the node name community public). Most options and first resource identifiers are unnamed. Parameters can be entered in any order. Only unnamed keys must be entered directly after the node name.
Parameter Types Parameter values belong to a parameter type. Parameter types limit the parameter values to strings that the system can understand. Parameter types consists of 1 to N fields with separators in between. Each field belongs to a basic type. The separator is in most cases a colon : or a slash /. The name of parameter types always starts with an uppercase character and can contain an optional domain name. The domain name is separated from the parameter name by ::. The sequence in which the fields appear can differ in case one of the fields belongs to an enumeration type. For example, if provided some possible values for the parameter type ExtendedFileName (the first field is an enumeration field with possible values file and ftp, host-name, user-name, password and local-file are also fields): • file: local-file • ftp: host-name @ user-name : password / local-file Parameter types are built by combining 1 to N basic types.
Basic Types Basic types can be divided in two groups: fixed length basic types and variable length basic types. Examples of variable length basic types are: • integers • printable strings (representing operator chosen names or descriptions) • SNMP object identifiers • binary strings The length of a variable length basic type is in most cases limited. The definition of logical length depends on the basic type: number of characters for printable strings, number of bytes for binary strings, and number of numbers in the object identfier for SNMP object identifiers. Examples of fixed length basic types are: • ip-address • fixed-length printable strings • enumeration types (limited list of allowed strings)
3HH-08079-DDCA-TCZZA 01
Released
63
1 ISAM CLI
Basic Type Formatting Rules Integers can be entered in a decimal format. Large integers can be abbreviated as follows: • decimal-number k which is equal to decimal-number *1000 (For example: 3k is equal to 3000) • decimal-number M which is equal to decimal-number *1000000 • decimal-number G which is equal to decimal-number *1000000000 Binary strings must be entered as: hex-byte : hex-byte :...: hex-byte. hex-byte is a number between 0 and 255 in hexadecimal format (all lowercase).For example, 3f:23:ff:b2 is a valid binary string. Object identifiers and ipv4-addresses must be entered as: decimal-number . decimal-number ..... decimal-number.For example, 128.17.32.45 is a valid object identifier. The values of all fields may be placed within double quotes. A field separator can never be placed within double quotes. For example, "1"/"1" is a valid shelf identifier, but "1/1" is not a valid shelf identifier. A field value can contain multiple double quotes. For example, "hallo world" is equivalent to hallo" "world or to "hallo"" ""world". Printable strings must be placed within double quotes if they contain special characters: double quote ", a backslash \, a question mark ?, a cross #, a space, a tab, a carriage return, or a new line. The backslash \ is the escape character. The double quote " and backslash \ characters must be preceded by the escape character. The \ char is equivalent to char with the following exceptions: • \r : carriage-return • \t : tab • \n : new-line In some cases it is possible that a command is ambiguous. For example, info operator detail can be interpreted in two ways: list the configuration of the operator with the name detail or list the configuration of all operators in detail. The ambiguity is solved by the parser in the following way: if the string contains quotes, it is interpreted as a printable string, otherwise it is interpreted as a keyword. For example, info operator "detail" lists the configuration of the operator with the name detail and info operator detail lists the configuration of all operators in detail.
Syntax Check The system verifies if each typed character is syntactically correct. In case the system detects a syntax error, it will position the cursor at the offending character and beep. This can give strange effects if you are entering characters in the 'insert mode': the invalid characters will shift to the right and any newly entered character will be inserted in front of the faulty characters. To avoid this strange effect, it is recommended to work in the (default) overwrite mode.
Command Repetition Values of parameters may contain decimal, hexadecimal or character ranges. These ranges indicate that the concerned command must be repeated a number of times with the different values as specified in the range. Decimal ranges are entered as [ d: start...end ] in which start and end are integers. Example of a decimal range: lt:1/1/[4...16] Hexadecimal ranges are entered as [ h: start...end ] in which start and end are hexadecimal numbers. start and end values may not contain uppercase characters and the number of characters of the first start value determines the number of characters to be entered for the following values in the range. Example of a hexadecimal range:
64
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
03:06:ff:[h:aa...bd] Character ranges are entered as [ c: start...end ] in which start and end are characters. start and end value must belong to the same character class: digit, lowercase or uppercase. Special characters are not allowed. Example of a character range : operator[c:a...f] Ranging is not supported for float values Ranges have following restrictions: • One command may only contain 1 range. • The default range type is decimal. It will be used if the type is not explicitely mentioned with 'd:' , 'h:' or 'c:'. • Subranges can be separated with a comma. For example: [d:17...19,32,60...62] will be replaced consecutively with the values 17, 18, 19, 32, 60, 61 and 62. • Ranges between quotes are not expanded. • Command completion may refuse to work once a range is entered. • Execution of command repetition will stop once an iteration in the range fails. The system sometimes restricts which range type may be used: the system only allows a decimal range where a decimal number can be entered or a hexadecimal range where a hexadecimal number can be entered. It even imposes that the range replaces completely the number. Example: 1[2...3] is invalid, [12...13] must be entered instead. Also the start and end of the range must fall in the allowed range for the number. Only text strings may contain all types of ranges. The way the system handles a range depends on the command. • Some commands can handle ranges directly. Repeating the command will be done internally. The command will then behave for the operator as a normal command.. • For the other commands, the system will execute the command end - start + 1 times in which the specified range is each time replaced by a number out of the range. Each expanded command is shown to the operator. Commands that normally change the context, don't do this in this case. The command repetition can be stopped via an interrupt. • Range commands in combination with help "?" character always show the complete list of available parameters and subnodes and do not suppress subnodes in case of the existing nodes.
Obsolete and Replaced Parameters Parameters can become obsolete or parameters are substituted by new parameters. See the definition and strategy in section 1.11 CLI Backward Compatibility.
3HH-08079-DDCA-TCZZA 01
Released
65
1 ISAM CLI
1.6 Filters The language provides filters to manipulate the output of commands. For list of available filters, please refer to command description of section "CLI Filters". Filters can be specified in case the command generates output. They are separated from the basic command with a pipe character |. The user can specify a sequence of filters as in following example: info | match exact:1/1 | count lines.
66
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.7 Printers The language provides printers to allow the user to decide how the output must be printed on his terminal. The available printers are discussed in detail in a separate chapter. Printers can be specified in case the command generates output. They are separated from the basic command with a pipe character |. The user can specify maximum one printer as in following example: info | match exact:1/1 | more The default printer can be specified for the CLI session or the operator.
3HH-08079-DDCA-TCZZA 01
Released
67
1 ISAM CLI
1.8 Getting help The user can get help in two ways. The first is using the help command. This gives an extensive explanation on the command. The user can also enter a question-mark ? at each position in the command. He will then get a short explanation on what he can enter at this position in the command. For example: configure system security operator ? gives following output:
: the name of the operator [a-z0-9]
(1<=x<=11)
This has the following meaning: • Sec::OperatorName is the name of the parameter type. This indicates that the user must enter a parameter value. • : indicates that the concerned object is an optional parameter. Mandatory parameters are indicated with !, obsolete parameters and obsolete nodes with X, regular nodes with +, commands with • the name of the operator explains how the parameter will be interpreted by the system. • [a-z0-9] indicates that the value may consist of the lower-case alfanumeric characters, the ASCII characters a till z and 0 till 9. • (1<=x<=11) indicates that the name must consist of at least 1 character and maximum 11 characters.
68
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.9 The CLI Prompt The prompt can be configured by the user. The prompt can be specified for the session, for an operator or for an operator profile. If no specific prompt is specified for the session, the prompt specified for the operator is taken and the prompt specified for the operator profile is taken if no prompt is specified for the operator. The prompt can be composed with following components : • %n : the name of the current operator. • %s : the current numbering scheme (typ|leg|pos). • %! : the current history number. • % num d : the current context. - num is the maximum number of components (starting from the last) that are shown (default is all). - each component will be separated from the next one with a >. - a > is also added in front of the first component. • • •
%% : a % %c : # if the current node was an existing node or $ if it is newly created. any other character is just added to the prompt as is.
The default prompt is "%s:%n%d%c " The system will add a > at the end of each empty prompt or each prompt that consists purely out of white-space
3HH-08079-DDCA-TCZZA 01
Released
69
1 ISAM CLI
1.10 Entering CLI Commands Following key strokes are treated in a special way while entering commands: • arrow-left : move the cursor one position to the left. • arrow-right : move the cursor one position to the right. • arrow-up : get the previous stored command (round-robin, starts with the last stored command). • arrow-down : get the next stored command (round-robin, starts with the oldest stored command). • insert : toggle between insert and overwrite mode. • backspace : delete the character before the cursor and move the cursor one position to the left. • delete : delete the character under the cursor. • control-c : interrupt the current command or clear the current entered string on a telnet or SSH terminal. • control-a : move the cursor to the beginning of the line. • control-p : get the previous stored command (round-robin, starts with the last stored command). • control-n : get the next stored command (round-robin, starts with the oldest stored command). • control-k : delete all characters starting from the position of the cursor. • control-u : delete all entered characters. • control-w : delete one word before the cursor. • control-x : interrupt the current command or clear the current entered string on the craft terminal. • control-l : clear screen. • tab : trigger command completion. • space : terminate a token and trigger command completion, unless it is placed between double quotes. • # : treat all following commands as comment, unless they are placed between double quotes. • ? : trigger online-help, unless it is placed between double quotes. Entering a tab triggers command completion. The system will try to expand the existing entered string until an ambiguity is found. If there is no ambiguity, a space will be added behind the token. Entering a space behind an entered string has - for keywords - the same effect as the tab. For example: entering c followed by a tab in the root node will expand to configure. For example: entering c followed by a space in the root node will expand to configure. For example: entering configure system security operator admin pr followed by a tab will expand to configure system security operator admin pro because there is still an ambiguity here between prompt and profile.
70
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.11 CLI Backward Compatibility Strategy ISAM has provided a Command Line Interface since the beginning. With each new Software Release, new features are added and as a consequence also the CLI commands need to evolve. New features often result in new commands or extension of existing commands.
Strategy with respect to Configuration Commands When new features become available, commands and parameters will be affected. The objective of the strategy is that existing configuration scripts will not be broken, i.e. they can still be used without throwing errors. New commands can be defined that are an add-on to the existing set of commands. Existing commands may need to be expanded or they may be replaced by anew command. Old commands may become useless and will be obsolete. When existing commands are expanded, new parameters may need to be added on to a command, existing parameters may need to be extended or parameters may be replaced by anew parameter.Exceptionally, parameters become useless and will be obsolete. Notice that obsolete commands and parameters will not be maintained for new features; moreover, eventually, in due time, in the scope of a major SW release, an obsolete command and/or parameter will actually be removed from the CLI Command Tree. See chapter 'Phase out strategy obsolete commands and/or parameters'. Backward Compatibility support for configuration commands. Configuration commands shall remain backwards compatible. A command may become obsolete because either it is no longer useful or it needs to be replaced by a new command. At the node level there are two ways: • Obsolete command - A command becomes obsolete when the corresponding functionality is removed from the system. In order to avoid that configuration scripts from previous software releases break, the command is not removed. Rather, executing the command will have no effect and the command will never appear in the output of an info command. •
Obsolete and Replaced command - A command may get replaced by a new one. This may occur when the corresponding functionality is modified or expanded. In order to avoid that configuration scripts from previous software releases break, the command is not removed. Rather, the command is defined as 'obsolete and replaced'. This means that the command is still valid and can still be executed but it will never appear in the output of an info command.
Backward Compatibility support for Configuration Commands parameters. Configuration commands shall remain backwards compatible. A way to accomplish this is by allowing parameters of the command to evolve. A parameter becomes obsolete because either it is no longer useful or it needs to be replaced by a new parameter. •
Obsolete parameter - A parameter becomes obsolete when the corresponding functionality is no longer supported by the system. In order to avoid that configuration scripts from previous software releases break, the parameter is not removed. Rather, entering the parameter will have no effect and the parameter will never appear in the output of an info command.
3HH-08079-DDCA-TCZZA 01
Released
71
1 ISAM CLI
•
Obsolete and Replaced parameter - A parameter may get replaced by a new one. This may occur when the corresponding functionality is modified or extended. In order to avoid that configuration scripts from previous software releases break, the parameter is not removed. Rather, the parameter is defined as 'obsolete and replaced'. This means that the parameter is still valid and can still be executed but it will never appear in the output of an info command. The replacing parameter will appear in the output of an info command and supports the modified or extended functionality.
Strategy with respect to Show Commands The output of any show command is available in various formats. Formatting of the output may change over time. XML type of output is formalized. Writers of CLI scripts are encouraged to use the XML format, as this output is ignorant of any formatting. The information displayed may change as a result of new features. The goal is to add new parameters to the existing display output without modifying the current parameters. In exceptional cases the latter cannot be guaranteed.
72
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.12 Phase Out Strategy Obsolete Commands and/or Parameters This chapter describes the phase out strategy that will be followed for obsolete commands and/or obsolete parameters.
Announcement Release The announcement release is the release in which we announce to the customer that a defined set of "impacted" cli commands will phase-out in the phase-out release. The announcement release is independent from the release in which the commands and/or parameters became 'obsolete'. The "impacted" cli commands are the commands which are obsolete or the commands which contain obsolete parameters. See chapter 'Command Phase Out Annoucement Release' for the list of "impacted" CLI commands.
Phase Out Release This is the release in which the listed announced "impacted" commands are removed (obsolete command) or modified (obsolete parameter).From this release onwards, obsolete commands and/or parameters are no longer supported. The obsolete commands will be indicated as removed in the history section of the CLI user guide. The commands with obsolete parameters will be indicated as modified commands in the history section of the CLI user guide. The phase-out release is the release succeeding 2 releases after the announcement release.
Customer Impact • • • •
List of impacted commands (See chapter 'Command Phase Out Annoucement Release') should carefully be checked in the CLI Command Guide chapter Announcement Release. The obsolete commands and/or obsolete parameters are indicated in the command tree by the prefix X. The customer should determine the phase-out release. Any OSS systems and/or scripts using CLI commands should be checked and updated if required. Once the command is phased-out, the normal error reporting will be applicable.
3HH-08079-DDCA-TCZZA 01
Released
73
1 ISAM CLI
1.13 Command Phase Out Annoucement Release This section gives a list of all the impacted CLI commands which will phase out in the phase-out release. See previous chapter 'phase out strategy obsolete commands and/or parameters' for more info about the phase-out release'. The listed CLI commands are commands which are obsolete or commands which contain obsolete parameters.
74
Released
3HH-08079-DDCA-TCZZA
01
1 ISAM CLI
1.14 Non supported commands/parameters This chapter lists the non supported commands or partially non supported commands e.g. commands containing non supported parameters. These obsolete commands (or obsolete command parameters) should not be used in any customer provisioning scripts. Alcatel-Lucent is not responsible for system behaviour or failing provisioning scripts in case the customer still uses these commands. Non supported commands/parameters from R4.1.02 onwards configure equipment shelf configure interface port admin igmp mcast-src configure igmp channel configure igmp shub igs-system configure mcast src show igmp module-mcast-src show igmp module-mcast-src packagemember admin ip vrf-stats interface user bridgeport configure ip shub arp configure ip shub vrf routing-option preference route-type show ip vrf-interface user bridgeport configure ip vrf user-itf bridgeport configure qos shub flow configure qos dsl-port configure qos shdsl-port configure qos dsl-port queue configure qos shdsl-port queue configure system security ssh access configure software-mngt oswp configure transport shub mac-filter configure transport shub mac-filter in-port configure system shub filter ip-filter port-filter configure system shub filter ip-filter port-filter in-port configure system shub filter ip-filter port-filter out-port configure bridge port configure bridge port vlan-id configure vlan configure vlan id show xdsl-bonding operational-data near-end
3HH-08079-DDCA-TCZZA 01
Released
75
1 ISAM CLI
show xdsl-bonding operational-data far-end configure xdsl-bonding group configure xdsl line configure xdsl service-profile configure xdsl spectrum-profile configure xdsl spectrum-profile vdsl
76
Released
3HH-08079-DDCA-TCZZA
01
2- Environment Configuration Commands
2.1 Environment Configuration Command Tree 2.2 Environment Configuration Command
3HH-08079-DDCA-TCZZA 01
2-78 2-79
Released
77
2 Environment Configuration Commands
2.1 Environment Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "Environment Configuration Commands".
Command Tree ----environment - [no] prompt - [no] terminal-timeout - [no] print - [no] inhibit-alarms - [no] mode
78
Released
3HH-08079-DDCA-TCZZA
01
2 Environment Configuration Commands
2.2 Environment Configuration Command Command Description This command allows the operator to manage the session-specific parameters. These parameters are only valid for a specific session and are lost when the user logs out. The default values for prompt and print can be found in configure system security operator operator-name. The default value for terminal-timeout can be found in configure system security profile profile-name. terminal-timeout: A value of 0 equals an infinite timeout value (i.e. the terminal will never time out). The prompt can be composed with following components : • %n : the name of the current operator. • %s : the current numbering scheme (typ|leg|pos). • %! : the current history number. • % num d : the current context. - num is the maximum number of components (starting from the last) that are shown (default is all). - each component will be separated from the next one with a >. - a > is also added in front of the first component. • • •
%% : a % %c : # if the current node was an existing node or $ if it is newly created. any other character is just added to the prompt as is.
User Level The command can be accessed by operators with all privileges, and executed by operators with all privileges.
Command Syntax The command has the following syntax: > environment [ no prompt | prompt ] [ no terminal-timeout | terminal-timeout ] [ no print | print ] [ [ no ] inhibit-alarms ] [ no mode | mode ]
Command Parameters Table 2.2-2 "Environment Configuration Command" Command Parameters Parameter
Type
Description
[no] prompt
Parameter type: Format: - a specification of the prompt - length: x<=28 Parameter type: Format: ( default | timeout : ) Possible values:
optional parameter with default value: "" the specification of the prompt
[no] terminal-timeout
3HH-08079-DDCA-TCZZA 01
optional parameter with default value: "timeout : 30" specify the inactivity timeout of the terminal
Released
79
2 Environment Configuration Commands
Parameter
[no] print
[no] inhibit-alarms [no] mode
80
Type
Description
- default : the default inactivity timeout - timeout : specify the inactivity timeout Field type - specify the inactivity timeout of the terminal - unit: minutes - range: [0...120] Parameter type: Format: ( more | no-more | default ) Possible values: - more : the output is passed via the more filter - no-more : the output is put directly on the terminal - default : use the method as specified by the profile Parameter type: boolean
optional parameter with default value: "default" specifies the way the output is printed on the terminal
Parameter type: Format: ( batch | interactive ) Possible values: - batch : non-interactive mode intended for scripting tools - interactive : interactive mode intended for human operators
Released
optional parameter disables the alarm reporting in the current session optional parameter with default value: "interactive" the mode in which the CLI handles command input
3HH-08079-DDCA-TCZZA
01
3- Alarm Configuration Commands
3.1 Alarm Configuration Command Tree 3.2 Alarm Log Configuration Command 3.3 Alarm Entry Configuration Command 3.4 Alarm Delta Log Configuration Command 3.5 SHub Alarm Configuration Command 3.6 Customizable Alarm Profile Configuration Command
3HH-08079-DDCA-TCZZA 01
3-82 3-84 3-86 3-100 3-102 3-105
Released
81
3 Alarm Configuration Commands
3.1 Alarm Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "Alarm Configuration Commands".
Command Tree ----configure ----alarm - log-sev-level - log-full-action - non-itf-rep-sev-level ----entry - (index) - [no] severity - [no] service-affecting - [no] reporting - [no] logging ----delta-log - indet-log-full-action - warn-log-full-action - minor-log-full-action - major-log-full-action - crit-log-full-act ----shub ----entry - (index) - severity - [no] service-affecting - [no] reporting ----[no] custom-profile - (name) - [no] mnemonic1 - [no] description1 - [no] visible1 - [no] audible1 - [no] polarity1 - [no] severity1 - [no] mnemonic2 - [no] description2 - [no] visible2 - [no] audible2 - [no] polarity2 - [no] severity2 - [no] mnemonic3 - [no] description3 - [no] visible3 - [no] audible3 - [no] polarity3 - [no] severity3 - [no] mnemonic4 - [no] description4
82
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
- [no] visible4 - [no] audible4 - [no] polarity4 - [no] severity4 - [no] mnemonic5 - [no] description5 - [no] visible5 - [no] audible5 - [no] polarity5 - [no] severity5
3HH-08079-DDCA-TCZZA 01
Released
83
3 Alarm Configuration Commands
3.2 Alarm Log Configuration Command Command Description This command allows the operator to maintain a log that contains all alarm state changes by enabling the logging mode and setting the severity level equal to or higher than the severity level that the operator is interested in.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure alarm log-sev-level non-itf-rep-sev-level
log-full-action
Command Parameters Table 3.2-2 "Alarm Log Configuration Command" Command Parameters Parameter
Type
Description
log-sev-level
Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : not a definite known severity level - warning : just to inform as a warning - minor : not service affecting - major : service affecting - critical : service breaking Parameter type: Format: ( wrap | halt ) Possible values: - wrap : older log records are overwritten by recent ones - halt : logging is stopped until the log buffer is reset Parameter type: Format: ( indeterminate | warning | minor | major
optional parameter set the lowest severity level to log alarms
log-full-action
non-itf-rep-sev-level
84
Released
optional parameter set the action if log buffer is full
optional parameter set minimum severity level to report non itf alarms
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Parameter
Type
Description
| critical ) Possible values: - indeterminate : not a definite known severity level - warning : just to inform as a warning - minor : not service affecting - major : service affecting - critical : service breaking
3HH-08079-DDCA-TCZZA 01
Released
85
3 Alarm Configuration Commands
3.3 Alarm Entry Configuration Command Command Description This command allows the operator to manage local alarm entries.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure alarm entry (index) [ no severity | severity ] [ [ no ] service-affecting ] [ [ no ] reporting ] [ [ no ] logging ]
Command Parameters Table 3.3-1 "Alarm Entry Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: ( xtca-ne-es | xtca-ne-ses | xtca-ne-uas | xtca-ne-day-es | xtca-ne-day-ses | xtca-ne-day-uas | xtca-fe-es | xtca-fe-ses | xtca-fe-uas | xtca-fe-day-es | xtca-fe-day-ses | xtca-fe-day-uas | xtca-leftrs | xtca-day-leftrs | xtca-fe-leftrs | xtca-fe-day-leftrs | xdsl-ne-los | xdsl-ne-lof | xdsl-ne-lom | xdsl-ne-ese | xdsl-act-cfg-error | xdsl-act-not-feas | xdsl-up-br-reach | xdsl-ne-ncd | xdsl-ne-lcd | xdsl-fe-los
alarm type
86
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
| xdsl-fe-lof | xdsl-fe-lpr | xdsl-fe-lol | xdsl-fe-lom | xdsl-fe-ese | xdsl-fe-upbo-vio | xdsl-fe-cpe-pol | xdsl-tpstc-mis | xdsl-act-comm | xdsl-act-modem | xdsl-do-br-reach | xdsl-fe-ncd | xdsl-fe-lcd | xdsl-frtx-init-fail | xdsl-vect-dle | vectline-xtc-var-vict | vectline-xtc-var-dist | vectline-corp-errf | vect-vp-lt-mismatch | vect-inv-qsfp | sw-rollback | db-rollback | xvps-inv-dbase | inv-cde-file | miss-cde-file | cde-hash-error | cell-discard-up | cell-discard-down | persist-data-loss | mac-conflict | sntp-comm-lost | preferred-mode | timing-reference | nt-disk-95%full | shub-loc | back-pnl-inv | shub-conf-loss | rack-power | rack-fan-unit1 | rack-fan-unit2 | shelf-mismatch | shelf-missing | shelf-install-missing | door | ac-power-fail | test-chain-config | tau-problem | itsc-problem | test-resources | hw-fail | test-blk-sw-download | test-blk-fail-download | board-mismatch | waiting-for-sw | temp-exceeded | temp-shutdown | board-missing
3HH-08079-DDCA-TCZZA 01
Released
87
3 Alarm Configuration Commands
Resource Identifier
Type
Description
| board-instl-missing | board-init | sem-power-fail | sem-ups-fail | board-reset-cf | shub-uplink | vlan-assign-fail | up-plan-bitrate | up-min-bitrate | up-config-not-feas | down-plan-bitrate | down-min-bitrate | down-config-not-feas | non-bonding-cpe | multiple-cpes | register | group-incomplete | host-sfp-los | host-sfp-tx-fail | host-sfp-not-prst | host-sfp-inv-id | host-sfp-ctrl-fail | host-sfp-rmtlt | host-sfp-mismatch | host-sfp-incompt | exp-sfp-los | exp-sfp-tx-fail | exp-sfp-not-prst | exp-sfp-inv-id | exp-sfp-ctrl-fail | exp-sfp-1-los | exp-sfp-2-los | custom1 | custom2 | custom3 | custom4 | custom5 | he-custom1 | he-custom2 | he-custom3 | he-custom4 | he-custom5 | he-custom6 | loss-over-cap | ping-check-fail | der-temp1 | der-temp2 | der-temp3 | der-temp4 | der-temp5 | der-temp6 | der-temp7 | der-temp8 | der-temp9 | der-temp10 | der-temp11 | der-temp12
88
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
| der-temp13 | der-temp14 | der-temp15 | der-temp16 | der-temp17 | der-temp18 | der-temp19 | der-temp20 | der-temp21 | der-temp22 | der-temp23 | der-temp24 | der-temp25 | der-temp26 | der-temp27 | der-temp28 | der-temp29 | der-temp30 | der-temp31 | der-spa1 | der-spa2 | der-spa3 | der-spa4 | der-spa5 | der-spa6 | der-spa7 | der-spa8 | der-spa9 | der-spa10 | der-spa11 | der-spa12 | der-spa13 | der-spa14 | der-spa15 | der-spa16 | der-spa17 | der-spa18 | der-spa19 | der-spa20 | der-spa21 | der-spa22 | der-spa23 | der-spa24 | der-spa25 | der-spa26 | der-spa27 | der-spa28 | der-spa29 | der-spa30 | der-spa31 | apsf-alarm | custextalarm1 | custextalarm2 | custextalarm3 | custextalarm4 | custextalarm5 | pluginfan
3HH-08079-DDCA-TCZZA 01
Released
89
3 Alarm Configuration Commands
Resource Identifier
Type
Description
| plugin-dc-a | plugin-dc-b | plugin-dg | ntr-a-loss | ntr-b-loss | lt-problem | applique-problem | xvps-conf-loss | mac-entry-nofree | fibre-conn-mismatch | link-cap-mismatch | eqpt-cap-mismatch | ctrl-dnld-failure | test-exceed-max-time | dc-termination | sc-cycle-missed | hazardous-potential | femf | device-protection | fileserv-unavail | shdsl-n-loopback | shdsl-c-loopback | shdsl-conferr | shdsl-atm-lcd | shdsl-lpr | shdsl-secu-err | shdsl-dev-fault | shdsl-atm-ncd | shdsl-n-losw | shdsl-c-losw | shdsl-n-aten | shdsl-c-aten | shdsl-n-snr | shdsl-c-snr | shdsl-n-dccont | shdsl-c-dccont | shdsl-c-actfail | ima-grp-fe-su | ima-grp-fe-cfg | ima-grp-ne-cfg | ima-grp-fe-nl | ima-grp-ne-nl | ima-grp-fe-blk | ima-lnk-lif | ima-lnk-lods | ima-lnk-misc | ima-lnk-rfi | ima-lnk-fault | ima-lnk-txblk | ima-lnk-rxblk | bad-digitmap | dhcp-unreach | unknown-sub | ground-key | port-hightemp | port-jbfltca | reg-domainname
90
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
| reg-auth | reg-timeout | reg-srvfailresp | inv-domainname | inv-auth | inv-timeout | inv-srvfailresp | subs-srvfailresp | transport-mismatch | dns-lookup-failure | none-dns-srv | no-dns-srv | none-srv | no-srv | reg-srv-unreach | proxy-srv-unreach | fanout | up-overflow | upobc-overflow | dwobc-overflow | dw-overflow | lwpri-overflow | queue-drop | queue-load | mgc-unreachable | sgc-unreachable | lcard-unreach-srvcard | lcard-type-mismatch | meg-unknown-sub | meg-ground-key | meg-high-temp | meg-act-fail | meg-over-current | line-showering | sig-brd-persist-loss | sig-brd-disk-full | sig-brd-db-rollback | mg-overload | loss-env-mon | etca-los | etca-fcs | etca-day-los | etca-day-fcs | user-sfp-los | user-sfp-tx-fail | user-sfp-not-prst | user-sfp-inv-id | user-sfp-t-exceed | user-sfp-mismatch | loss-lsmswp-cap | inv-xvps-pair-data | ctl-com-fail | network-power-loss | hw-fault | synce-fail | bits-fail | bits-output-shutoff )
3HH-08079-DDCA-TCZZA 01
Released
91
3 Alarm Configuration Commands
Resource Identifier
Type
Description
Possible values: - xtca-ne-es : errored seconds in 15 min - xtca-ne-ses : severely errored seconds in 15 min - xtca-ne-uas : unavailable seconds in 15 min - xtca-ne-day-es : errored seconds in 1 day - xtca-ne-day-ses : severely errored seconds in 1 day - xtca-ne-day-uas : unavailable seconds in 1 day - xtca-fe-es : errored seconds in 15 min - xtca-fe-ses : severely errored secs in 15 min - xtca-fe-uas : unavailable seconds in 15 min - xtca-fe-day-es : errored seconds in 1 day - xtca-fe-day-ses : severely errored secs in 1 day - xtca-fe-day-uas : unavailable seconds in 1 day - xtca-leftrs : low error free throughput seconds in 15 min - xtca-day-leftrs : low error free throughput seconds in 1 day - xtca-fe-leftrs : far end low error free throughput seconds in 15 min - xtca-fe-day-leftrs : far end low error free throughput seconds in 1 day - xdsl-ne-los : loss of signal - xdsl-ne-lof : loss of frame - xdsl-ne-lom : loss of margin - xdsl-ne-ese : excessive severe errors - xdsl-act-cfg-error : line configuration data cannot be used - xdsl-act-not-feas : line capacity not enough to setup requested profile - xdsl-up-br-reach : planned bitrate not reached after initialization - xdsl-ne-ncd : no cell delineation - xdsl-ne-lcd : loss of cell delineation - xdsl-fe-los : loss of signal - xdsl-fe-lof : loss of frame - xdsl-fe-lpr : loss of power - xdsl-fe-lol : loss of link - xdsl-fe-lom : loss of margin - xdsl-fe-ese : excessive severe errors - xdsl-fe-upbo-vio : upbo violation - xdsl-fe-cpe-pol : activation failure cpe policing - xdsl-tpstc-mis : mismatch between the configured tps-tc mode and the mode supported by the connected cpe - xdsl-act-comm : init not successful due to communications problem - xdsl-act-modem : no peer modem detected - xdsl-do-br-reach : planned bitrate not reached after init - xdsl-fe-ncd : no cell delineation - xdsl-fe-lcd : loss of cell delineation - xdsl-frtx-init-fail : init not successful due to forced rtx - xdsl-vect-dle : vectoring disorderly leaving event - vectline-xtc-var-vict : excessive victim crosstalk coefficients variation - vectline-xtc-var-dist : excessive disturber crosstalk coefficients variation - vectline-corp-errf : corrupted or missing errorf-samples - vect-vp-lt-mismatch : actual vp-lt connection(s) do not match expected vp-lt connection(s) or vp-lt connection lost - vect-inv-qsfp : qsfp has no valid Alcatel-Lucent ID - sw-rollback : non active oswp,db cannot be operational -
92
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
will rollback - db-rollback : selected oswp,db cannot be operational - will rollback - xvps-inv-dbase : invalid xvps dbase - inv-cde-file : invalid xvps cde file - miss-cde-file : missing cde profile - cde-hash-error : cde profile hash error - cell-discard-up : cell discarded in the upstream direction - cell-discard-down : cell discarded in the downstream direction - persist-data-loss : all data lost after restart - system not configured - mac-conflict : duplicate mac address from this pvc - sntp-comm-lost : sntp server not responding - preferred-mode : preferred mode not available - timing-reference : timing reference failure - nt-disk-95%full : nt disk 95% full - shub-loc : communication lost with shub - back-pnl-inv : BackPanel-type Invalid - shub-conf-loss : SHub configuration loss - recent changes lost - rack-power : power fuse broken - rack-fan-unit1 : fan unit rack 1 failing - rack-fan-unit2 : fan unit rack 2 failing - shelf-mismatch : shelf type different from planned type - shelf-missing : detected shelf no longer detected - shelf-install-missing : shelf planned but not installed - door : open cabinet door - ac-power-fail : external power failure - shelf shutdown in 15 minutes - test-chain-config : test chain config does not support the test requested. - tau-problem : TAU board not present or failed. - itsc-problem : ITSC module not present or failed. - test-resources : test resources are unavailable after starting the test - hw-fail : A test equipment reported a hardware failure. - test-blk-sw-download : test req are blocked during the ITSC module SW download - test-blk-fail-download: test req are blocked when a ITSC SW download fails - board-mismatch : board inserted different from planned - waiting-for-sw : not able to download all the applicable sw files - temp-exceeded : temperature threshold exceeded on the board - temp-shutdown : board powered down itself - too high temperature - board-missing : board detected after planning - now missing - board-instl-missing : board never detected after planning - board-init : board initialisation failure - sem-power-fail : SEM external power failure - sem-ups-fail : SEM external power supply failure - board-reset-cf : board reset and/or communication failure - shub-uplink : lanx uplink breakdown or removal - vlan-assign-fail : failure to assign VLAN for a user session
3HH-08079-DDCA-TCZZA 01
Released
93
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- up-plan-bitrate : upstream bitrate is above min and below planned - up-min-bitrate : upstream bitrate is below min bitrate - up-config-not-feas : upstream bitrate is not enough to set up config group - down-plan-bitrate : downstream bitrate is above min and below planned - down-min-bitrate : downstream bitrate is below min bitrate - down-config-not-feas : downstream bitrate is not enough to set up config group - non-bonding-cpe : no bonding cpe modem is connected - multiple-cpes : bonding group has multiple cpe modems connected - register : bonding group discovery or aggregation register failure - group-incomplete : bonding group is incomplete - host-sfp-los : loss of signal - host-sfp-tx-fail : Tx failure - host-sfp-not-prst : not present - host-sfp-inv-id : no valid Alcatel-Lucent ID - host-sfp-ctrl-fail : control failure - host-sfp-rmtlt : unexpected remote plug-in - host-sfp-mismatch : assignment does not match reported rack/shelf/slot - host-sfp-incompt : incompatible shelf type detected - exp-sfp-los : expansion side loss of signal - exp-sfp-tx-fail : Tx failure - exp-sfp-not-prst : not present - exp-sfp-inv-id : no valid Alcatel-Lucent ID - exp-sfp-ctrl-fail : control failure - exp-sfp-1-los : expansion side sfp1 loss of signal - exp-sfp-2-los : expansion side sfp2 loss of signal - custom1 : customizable alarm 1 - custom2 : customizable alarm 2 - custom3 : customizable alarm 3 - custom4 : customizable alarm 4 - custom5 : customizable alarm 5 - he-custom1 : host expansion customizable alarm 1 - he-custom2 : host expansion customizable alarm 2 - he-custom3 : host expansion customizable alarm 3 - he-custom4 : host expansion customizable alarm 4 - he-custom5 : host expansion customizable alarm 5 - he-custom6 : host expansion customizable alarm 6 - loss-over-cap : switch over capability in a redundant system - ping-check-fail : ping check in a redundant system - der-temp1 : Derived Alarm for Temporal Filter 1 - der-temp2 : Derived Alarm for Temporal Filter 2 - der-temp3 : Derived Alarm for Temporal Filter 3 - der-temp4 : Derived Alarm for Temporal Filter 4 - der-temp5 : Derived Alarm for Temporal Filter 5 - der-temp6 : Derived Alarm for Temporal Filter 6 - der-temp7 : Derived Alarm for Temporal Filter 7 - der-temp8 : Derived Alarm for Temporal Filter 8 - der-temp9 : Derived Alarm for Temporal Filter 9 - der-temp10 : Derived Alarm for Temporal Filter 10 - der-temp11 : Derived Alarm for Temporal Filter 11
94
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- der-temp12 : Derived Alarm for Temporal Filter 12 - der-temp13 : Derived Alarm for Temporal Filter 13 - der-temp14 : Derived Alarm for Temporal Filter 14 - der-temp15 : Derived Alarm for Temporal Filter 15 - der-temp16 : Derived Alarm for Temporal Filter 16 - der-temp17 : Derived Alarm for Temporal Filter 17 - der-temp18 : Derived Alarm for Temporal Filter 18 - der-temp19 : Derived Alarm for Temporal Filter 19 - der-temp20 : Derived Alarm for Temporal Filter 20 - der-temp21 : Derived Alarm for Temporal Filter 21 - der-temp22 : Derived Alarm for Temporal Filter 22 - der-temp23 : Derived Alarm for Temporal Filter 23 - der-temp24 : Derived Alarm for Temporal Filter 24 - der-temp25 : Derived Alarm for Temporal Filter 25 - der-temp26 : Derived Alarm for Temporal Filter 26 - der-temp27 : Derived Alarm for Temporal Filter 27 - der-temp28 : Derived Alarm for Temporal Filter 28 - der-temp29 : Derived Alarm for Temporal Filter 29 - der-temp30 : Derived Alarm for Temporal Filter 30 - der-temp31 : Derived Alarm for Temporal Filter 31 - der-spa1 : Derived Alarm for Spatial Filter 1 - der-spa2 : Derived Alarm for Spatial Filter 2 - der-spa3 : Derived Alarm for Spatial Filter 3 - der-spa4 : Derived Alarm for Spatial Filter 4 - der-spa5 : Derived Alarm for Spatial Filter 5 - der-spa6 : Derived Alarm for Spatial Filter 6 - der-spa7 : Derived Alarm for Spatial Filter 7 - der-spa8 : Derived Alarm for Spatial Filter 8 - der-spa9 : Derived Alarm for Spatial Filter 9 - der-spa10 : Derived Alarm for Spatial Filter 10 - der-spa11 : Derived Alarm for Spatial Filter 11 - der-spa12 : Derived Alarm for Spatial Filter 12 - der-spa13 : Derived Alarm for Spatial Filter 13 - der-spa14 : Derived Alarm for Spatial Filter 14 - der-spa15 : Derived Alarm for Spatial Filter 15 - der-spa16 : Derived Alarm for Spatial Filter 16 - der-spa17 : Derived Alarm for Spatial Filter 17 - der-spa18 : Derived Alarm for Spatial Filter 18 - der-spa19 : Derived Alarm for Spatial Filter 19 - der-spa20 : Derived Alarm for Spatial Filter 20 - der-spa21 : Derived Alarm for Spatial Filter 21 - der-spa22 : Derived Alarm for Spatial Filter 22 - der-spa23 : Derived Alarm for Spatial Filter 23 - der-spa24 : Derived Alarm for Spatial Filter 24 - der-spa25 : Derived Alarm for Spatial Filter 25 - der-spa26 : Derived Alarm for Spatial Filter 26 - der-spa27 : Derived Alarm for Spatial Filter 27 - der-spa28 : Derived Alarm for Spatial Filter 28 - der-spa29 : Derived Alarm for Spatial Filter 29 - der-spa30 : Derived Alarm for Spatial Filter 30 - der-spa31 : Derived Alarm for Spatial Filter 31 - apsf-alarm : Applique Power Supply Failure - custextalarm1 : Customizable External Alarm Number 1 - custextalarm2 : Customizable External Alarm Number 2 - custextalarm3 : Customizable External Alarm Number 3 - custextalarm4 : Customizable External Alarm Number 4 - custextalarm5 : Customizable External Alarm Number 5
3HH-08079-DDCA-TCZZA 01
Released
95
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- pluginfan : REM Fan Alarm - plugin-dc-a : REM DC A Alarm - plugin-dc-b : REM DC B Alarm - plugin-dg : Dying Gasp Alarm - ntr-a-loss : NTR-A signal is not available - ntr-b-loss : NTR-B signal is not available - lt-problem : LT board not present, not compatible or failed - applique-problem : Applique board not present, not compatible or failed - xvps-conf-loss : xvps configuration loss - mac-entry-nofree : no free mac entry in the mac table on lt board - fibre-conn-mismatch : REM Fibre Connection Mismatch Alarm - link-cap-mismatch : Link speed capability mismatch - eqpt-cap-mismatch : Link equipment capability mismatch - ctrl-dnld-failure : Controller card download failure - test-exceed-max-time : The test exceeded the maximum duration time limit. - dc-termination : The line being sealed is not terminated by the CPE. - sc-cycle-missed : sealing current not applied, no time to process the line - hazardous-potential : A Hazardous Potential is detected on the line under test - femf : foreign Electro-Motive Force on the line under test - device-protection : ITSC DP circ protect the device from the line under test - fileserv-unavail : file transfer Server unavailable or file transfer failed - shdsl-n-loopback : loopback active at the network side - shdsl-c-loopback : loopback active at the customer side - shdsl-conferr : configuration error - shdsl-atm-lcd : loss of atm cell delineation - shdsl-lpr : loss of power at stu-r - shdsl-secu-err : unable to disable stu-r access - shdsl-dev-fault : device fault - shdsl-atm-ncd : no atm cell delineation - shdsl-n-losw : loss of sync word at the network side on each pair - shdsl-c-losw : loss of sync word at the customer side on each pair - shdsl-n-aten : loop attenuation alarm at the network side on each pair - shdsl-c-aten : loop attenuation alarm at the customer side on each pair - shdsl-n-snr : snr margin alarm at the network side each pair - shdsl-c-snr : snr margin alarm at the customer side on each pair - shdsl-n-dccont : dc continuity fault at the network side on each pair - shdsl-c-dccont : dc continuity fault at the customer side on each pair - shdsl-c-actfail : activation failure at the customer side on each pair - ima-grp-fe-su : far-end starting up - ima-grp-fe-cfg : far-end failed configuration
96
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- ima-grp-ne-cfg : near-end failed configuration - ima-grp-fe-nl : insufficient number of links at far-end - ima-grp-ne-nl : insufficient number of links at near-end - ima-grp-fe-blk : far-end is blocked - ima-lnk-lif : loss of ima frame - ima-lnk-lods : link out of delay synchronization - ima-lnk-misc : link misconnect - ima-lnk-rfi : link remote failure indication - ima-lnk-fault : fault in link facility - ima-lnk-txblk : transmit blocked due to far-end - ima-lnk-rxblk : receive blocked due to far-end - bad-digitmap : Configured digitmap is unusable - dhcp-unreach : The DHCP server is unreachable - unknown-sub : subscriber exist in the POLT, but not in the appl server - ground-key : Return current to the ground - port-hightemp : Temperature threshold on user port exceeded. - port-jbfltca : JB fill level threshold on user port exceeded. - reg-domainname : Registration failure (resolving domain name). - reg-auth : Registration failure (authentication). - reg-timeout : Registration failure (message timeout). - reg-srvfailresp : Registration failure (failure response from server). - inv-domainname : Invitation failure (resolving domain name). - inv-auth : Invitation failure (authentication). - inv-timeout : Invitation failure (message timeout). - inv-srvfailresp : Invitation failure (failure response from server). - subs-srvfailresp : Subscribe failure (failure response from server). - transport-mismatch : Transport protocol mismatch - dns-lookup-failure : Dns look up failure - none-dns-srv : No reply for all DNS serverd - no-dns-srv : No DNS servers configured - none-srv : No reply for all SIP First Hops - no-srv : No SIP First Hop configured - reg-srv-unreach : All SIP register servers are unreachable - proxy-srv-unreach : All SIP proxy servers are unreachable - fanout : Lt load overflow - up-overflow : Upstream load overflow - upobc-overflow : Upstream load to OBC overflow - dwobc-overflow : Downstream load to OBC overflow - dw-overflow : Downstream load overflow - lwpri-overflow : The number of BE and CL pkts dropped exceed threshold - queue-drop : The number of pkts dropped by queue exceeds threshold - queue-load : The queue load exceeds threshold - mgc-unreachable : loss of contact with the media gateway controller - sgc-unreachable : loss of contact with signaling gateway controller - lcard-unreach-srvcard : line card unreachable with server card
3HH-08079-DDCA-TCZZA 01
Released
97
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- lcard-type-mismatch : associate board of wrong type - meg-unknown-sub : the megaco subscriber is unknown - meg-ground-key : voice port ground key - meg-high-temp : voice port high temperature - meg-act-fail : the first link layer for isdn subscriber activation failure - meg-over-current : voice port over current - line-showering : line showering - sig-brd-persist-loss : voice signaling board persistent data loss - sig-brd-disk-full : voice signaling board disk 90% full - sig-brd-db-rollback : voice signaling board db rollback - mg-overload : mg overload - loss-env-mon : env-monitor box lost or not alive - etca-los : loss of signal errors in 15 min - etca-fcs : frame check sequence errors in 15 min - etca-day-los : loss of signal errors in 1 day - etca-day-fcs : frame check sequence errors in 1 day - user-sfp-los : user sfp loss of signal - user-sfp-tx-fail : user sfp tx failure - user-sfp-not-prst : user sfp not detected - user-sfp-inv-id : user sfp invalid id - user-sfp-t-exceed : user sfp temperature exceed - user-sfp-mismatch : user sfp mismatch the configured type - loss-lsmswp-cap : lsm redundancy - inv-xvps-pair-data : invalid xvps pair redundancy data - ctl-com-fail : shelf controller communication failure - network-power-loss : Loss of Network Power - hw-fault : Hardware Failure - synce-fail : synce clock source failure - bits-fail : bits clock source failure - bits-output-shutoff : bits output failure
Table 3.3-2 "Alarm Entry Configuration Command" Command Parameters Parameter
Type
Description
[no] severity
optional parameter with default value: "minor" assign a severity level to this alarm
[no] service-affecting
Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : not a definite known severity level - warning : just to inform as a warning - minor : not service affecting - major : service affecting - critical : service breaking Parameter type: boolean
[no] reporting
Parameter type: boolean
[no] logging
Parameter type: boolean
optional parameter make this alarm service affecting optional parameter enable reporting of this alarm optional parameter enable logging of this alarm
Command Output
98
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Table 3.3-3 "Alarm Entry Configuration Command" Display parameters Specific Information name category
3HH-08079-DDCA-TCZZA 01
Type
Description
Parameter type: ( communications | qos | processing-error | equipment | environmental ) Possible values: - communications : communications related alarms - qos : QoS related alarms - processing-error : processing failure related alarms - equipment : equipment related alarms - environmental : environmental related alarms
category of an alarm This element is always shown.
Released
99
3 Alarm Configuration Commands
3.4 Alarm Delta Log Configuration Command Command Description This command allows the operator to configure the action of the system when the alarm log buffer is full. If the action is set to wrap, older log records are overwritten by recent records. If the action is set to halt, logging is stopped until the log buffer is reset.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure alarm delta-log [ indet-log-full-action ] [ warn-log-full-action ] [ minor-log-full-action ] [ major-log-full-action ] [ crit-log-full-act ]
Command Parameters Table 3.4-2 "Alarm Delta Log Configuration Command" Command Parameters Parameter
Type
Description
indet-log-full-action
Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap
optional parameter set the action when indeterminate log buffer is full
warn-log-full-action
minor-log-full-action
major-log-full-action
100
Released
optional parameter action in case indeterminate delta log buffer is full
optional parameter set the action when minor delta log buffer is full
optional parameter set action when major delta log buffer is full
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Parameter
crit-log-full-act
3HH-08079-DDCA-TCZZA 01
Type
Description
| halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full
optional parameter set action when critical delta log buffer is full
Released
101
3 Alarm Configuration Commands
3.5 SHub Alarm Configuration Command Command Description This command allows the operator to configure the SHub alarm parameters.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure alarm shub entry (index) [ severity ] [ [ no ] service-affecting ] [ [ no ] reporting ]
Command Parameters Table 3.5-1 "SHub Alarm Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: ( db-restore | reboot | sntp-comm | eth-link-down | mac-conflict | oper-speed-mismatch | ospf-itf-err | ospf-auth-err | ospf-rx-bad-err | ospf-lsdb-oflow | ospf-nhbr-statchg | ospf-itf-statchg | ospf-ext-lsa-threshold | ospf-instance-down | rip-config-err | rip-auth-fail | rip-rcv-bad-pkt | rip-table-treshold | rip-instance-down | arp-table-full | route-tbl-overflow | uplink-down | pccp-down | global-ospf-route | global-ospf-lsa-tbl | global-ospf-retrms-tbl
alarm type
102
Released
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
| global-ospf-lsaovflw | global-ospf-topology | global-rip-route-tbl | global-fwd-arp-tbl | global-fwd-route-tbl ) Possible values: - db-restore : shub DB restore - reboot : shub reboot from emergency boot package - sntp-comm : shub SNTP communication - eth-link-down : shub ethernet link down status - mac-conflict : MAC conflict - oper-speed-mismatch : mismatch in administrative and operational speed - ospf-itf-err : OSPF interface configuration error - ospf-auth-err : OSPF interface authetication error - ospf-rx-bad-err : bad packets received on OSPF interface - ospf-lsdb-oflow : external LSA database reached the overflow limit - ospf-nhbr-statchg : OSPF neighbor state change - ospf-itf-statchg : OSPF interface state change - ospf-ext-lsa-threshold: OSPF external LSA up threshold reached - ospf-instance-down : OSPF instance down - rip-config-err : RIP interface configuration error - rip-auth-fail : RIP interface authentication failure - rip-rcv-bad-pkt : bad packet received on RIP interface - rip-table-treshold : RIP route table up threshold reached - rip-instance-down : RIP instance down - arp-table-full : ARP table full per VRF - route-tbl-overflow : routing table threshold reached - uplink-down : uplink group down - pccp-down : lanx pccp down status - global-ospf-route : OSPF route table up threshold reached - global-ospf-lsa-tbl : OSPF LSA table up threshold reached - global-ospf-retrms-tbl: OSPF retransmission table up threshold reached - global-ospf-lsaovflw : OSPF self generated LSA table overflow - global-ospf-topology : OSPF area topology too big - global-rip-route-tbl : RIP global route table up threshold reached - global-fwd-arp-tbl : global ARP route table up threshold reached - global-fwd-route-tbl : global forwarding table full
Table 3.5-2 "SHub Alarm Configuration Command" Command Parameters Parameter
Type
Description
severity
Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : not a definite known severity level - warning : just to inform as a warning
optional parameter assign a severity level to this alarm
3HH-08079-DDCA-TCZZA 01
Released
103
3 Alarm Configuration Commands
Parameter
Type
[no] service-affecting
- minor : not service affecting - major : service affecting - critical : service breaking Parameter type: boolean
[no] reporting
Parameter type: boolean
Description
optional parameter make this alarm service affecting optional parameter enable reporting of this alarm
Command Output Table 3.5-3 "SHub Alarm Configuration Command" Display parameters Specific Information name category
104
Released
Type
Description
Parameter type: ( communications | qos | processing-error | equipment | environmental ) Possible values: - communications : communications related alarms - qos : QoS related alarms - processing-error : processing failure related alarms - equipment : equipment related alarms - environmental : environmental related alarms
defines the category of an alarm. This element is always shown.
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
3.6 Customizable Alarm Profile Configuration Command Command Description This command allows the operator to configure the external alarm profile. The profile is made to be assigned to a remote LT board. The profile reflects a configuration of external alarms parameters that corresponds to a certain environment where the remote board is located (in an outdoor cabinet, basement cabinet, ...). The use of a profile avoids the need to specify the parameters for each remote board separately. The alarm profile groups all five external alarms parameters. The profile contains a description/meaning of each alarm, as well as an indication that tells us whether or not any alarm outputs are to be triggered if the corresponding external input alarm is raised. On top of these parameters, a mnemonic (short for the description), the polarity and the severity are configurable.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure alarm ( no custom-profile (name) ) | ( custom-profile (name) [ no mnemonic1 | mnemonic1 ] [ no description1 | description1 ] [ no visible1 | visible1 ] [ no audible1 | audible1 ] [ no polarity1 | polarity1 ] [ no severity1 | severity1 ] [ no mnemonic2 | mnemonic2 ] [ no description2 | description2 ] [ no visible2 | visible2 ] [ no audible2 | audible2 ] [ no polarity2 | polarity2 ] [ no severity2 | severity2 ] [ no mnemonic3 | mnemonic3 ] [ no description3 | description3 ] [ no visible3 | visible3 ] [ no audible3 | audible3 ] [ no polarity3 | polarity3 ] [ no severity3 | severity3 ] [ no mnemonic4 | mnemonic4 ] [ no description4 | description4 ] [ no visible4 | visible4 ] [ no audible4 | audible4 ] [ no polarity4 | polarity4 ] [ no severity4 | severity4 ] [ no mnemonic5 | mnemonic5 ] [ no description5 | description5 ] [ no visible5 | visible5 ] [ no audible5 | audible5 ] [ no polarity5 | polarity5 ] [ no severity5 | severity5 ] )
Command Parameters Table 3.6-1 "Customizable Alarm Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(name)
Format: - a profile name - range: [a-zA-Z0-9-_.]
custom profile name
3HH-08079-DDCA-TCZZA 01
Released
105
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- length: 1<=x<=32
Table 3.6-2 "Customizable Alarm Profile Configuration Command" Command Parameters Parameter
Type
Description
[no] mnemonic1
Parameter type: Format: - an octet string defining mnemonic of external alarm - range: [A-Z] - length: x<=16 Parameter type: Format: - an octet string defining description of external alarm - length: x<=40 Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is visible - disable : external alarm output is non-visible Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is audible - disable : external alarm output is non-audible Parameter type: Format: ( normal | inverse ) Possible values: - normal : alarm polarity is normal - inverse : alarm polarity is inverse Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : alarm severity is indeterminate - warning : alarm severity is warning - minor : alarm severity is minor - major : alarm severity is major - critical : alarm severity is critical Parameter type: Format: - an octet string defining mnemonic of external alarm - range: [A-Z] - length: x<=16 Parameter type: Format: - an octet string defining description of external alarm - length: x<=40 Parameter type:
optional parameter with default value: "UNDEF" mnemonic identifying the customizable external alarm 1
[no] description1
[no] visible1
[no] audible1
[no] polarity1
[no] severity1
[no] mnemonic2
[no] description2
[no] visible2
106
Released
optional parameter with default value: "Undefined" description of the customizable external alarm 1 optional parameter with default value: "disable" trigger a visible alarm for external alarm 1
optional parameter with default value: "disable" trigger a audible alarm for external alarm 1
optional parameter with default value: "normal" alarm polarity is normal or inverse for external alarm 1
optional parameter with default value: "major" severity level of external alarm 1
optional parameter with default value: "UNDEF" mnemonic identifying the customizable external alarm 2 optional parameter with default value: "Undefined" description of the customizable external alarm 2 optional parameter with default
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Parameter
[no] audible2
[no] polarity2
[no] severity2
[no] mnemonic3
[no] description3
[no] visible3
[no] audible3
[no] polarity3
3HH-08079-DDCA-TCZZA 01
Type
Description
Format: ( enable | disable ) Possible values: - enable : external alarm output is visible - disable : external alarm output is non-visible Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is audible - disable : external alarm output is non-audible Parameter type: Format: ( normal | inverse ) Possible values: - normal : alarm polarity is normal - inverse : alarm polarity is inverse Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : alarm severity is indeterminate - warning : alarm severity is warning - minor : alarm severity is minor - major : alarm severity is major - critical : alarm severity is critical Parameter type: Format: - an octet string defining mnemonic of external alarm - range: [A-Z] - length: x<=16 Parameter type: Format: - an octet string defining description of external alarm - length: x<=40 Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is visible - disable : external alarm output is non-visible Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is audible - disable : external alarm output is non-audible Parameter type:
value: "disable" trigger a visible external alarm 2
alarm
for
optional parameter with default value: "disable" trigger a audible alarm for external alarm 2
optional parameter with default value: "normal" alarm polarity is normal or inverse for external alarm 2
optional parameter with default value: "major" severity level of external alarm 2
optional parameter with default value: "UNDEF" mnemonic identifying the customizable external alarm 3 optional parameter with default value: "Undefined" description of the customizable external alarm 3 optional parameter with default value: "disable" trigger a visible alarm for external alarm 3
optional parameter with default value: "disable" trigger a audible alarm for external alarm 3
optional parameter with default
Released
107
3 Alarm Configuration Commands
Parameter
[no] severity3
[no] mnemonic4
[no] description4
[no] visible4
[no] audible4
[no] polarity4
[no] severity4
108
Released
Type
Description
Format: ( normal | inverse ) Possible values: - normal : alarm polarity is normal - inverse : alarm polarity is inverse Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : alarm severity is indeterminate - warning : alarm severity is warning - minor : alarm severity is minor - major : alarm severity is major - critical : alarm severity is critical Parameter type: Format: - an octet string defining mnemonic of external alarm - range: [A-Z] - length: x<=16 Parameter type: Format: - an octet string defining description of external alarm - length: x<=40 Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is visible - disable : external alarm output is non-visible Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is audible - disable : external alarm output is non-audible Parameter type: Format: ( normal | inverse ) Possible values: - normal : alarm polarity is normal - inverse : alarm polarity is inverse Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values:
value: "normal" alarm polarity is normal or inverse for external alarm 3
optional parameter with default value: "major" severity level of external alarm 3
optional parameter with default value: "UNDEF" mnemonic identifying the customizable external alarm 4 optional parameter with default value: "Undefined" description of the customizable external alarm 4 optional parameter with default value: "disable" trigger a visible alarm for external alarm 4
optional parameter with default value: "disable" trigger a audible alarm for external alarm 4
optional parameter with default value: "normal" alarm polarity is normal or inverse for external alarm 4
optional parameter with default value: "major" severity level of external alarm 4
3HH-08079-DDCA-TCZZA
01
3 Alarm Configuration Commands
Parameter
[no] mnemonic5
[no] description5
[no] visible5
[no] audible5
[no] polarity5
[no] severity5
3HH-08079-DDCA-TCZZA 01
Type - indeterminate : alarm severity is indeterminate - warning : alarm severity is warning - minor : alarm severity is minor - major : alarm severity is major - critical : alarm severity is critical Parameter type: Format: - an octet string defining mnemonic of external alarm - range: [A-Z] - length: x<=16 Parameter type: Format: - an octet string defining description of external alarm - length: x<=40 Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is visible - disable : external alarm output is non-visible Parameter type: Format: ( enable | disable ) Possible values: - enable : external alarm output is audible - disable : external alarm output is non-audible Parameter type: Format: ( normal | inverse ) Possible values: - normal : alarm polarity is normal - inverse : alarm polarity is inverse Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : alarm severity is indeterminate - warning : alarm severity is warning - minor : alarm severity is minor - major : alarm severity is major - critical : alarm severity is critical
Description
optional parameter with default value: "UNDEF" mnemonic identifying the customizable external alarm 5 optional parameter with default value: "Undefined" description of the customizable external alarm 5 optional parameter with default value: "disable" trigger a visible alarm for external alarm 5
optional parameter with default value: "disable" trigger a audible alarm for external alarm 5
optional parameter with default value: "normal" alarm polarity is normal or inverse for external alarm 5
optional parameter with default value: "major" severity level of external alarm 5
Released
109
4- Trap Configuration Commands
4.1 Trap Configuration Command Tree 4.2 Trap Definition Configuration Command 4.3 Trap Manager Configuration Command
110
Released
4-111 4-112 4-114
3HH-08079-DDCA-TCZZA
01
4 Trap Configuration Commands
4.1 Trap Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "Trap Configuration Commands".
Command Tree ----configure ----trap ----definition - (name) - priority ----[no] manager - (address) - [no] priority - [no] cold-start-trap - [no] link-down-trap - [no] link-up-trap - [no] auth-fail-trap - [no] change-trap - [no] init-started-trap - [no] lic-key-chg-occr - [no] topology-chg - [no] dhcp-sess-pre - [no] alarm-chg-trap - [no] phys-line-trap - [no] eqpt-change-trap - [no] success-set-trap - [no] other-alarm-trap - [no] warning-trap - [no] minor-trap - [no] major-trap - [no] critical-trap - [no] redundancy-trap - [no] eqpt-prot-trap - [no] craft-login-trap - [no] restart-trap - [no] ntr-trap - [no] rad-srvr-fail - [no] login-occr-trap - [no] logout-occr-trap - [no] trapmngr-chg-trap - [no] mst-genral - [no] mst-error - [no] mst-protocol-mig - [no] mst-inv-bpdu-rx - [no] mst-reg-conf-chg - [no] max-per-window - [no] window-size - [no] max-queue-size - [no] min-interval - [no] min-severity
3HH-08079-DDCA-TCZZA 01
Released
111
4 Trap Configuration Commands
4.2 Trap Definition Configuration Command Command Description This command allows the operator to define the priority of a given trap.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure trap definition (name) [ priority ]
Command Parameters Table 4.2-1 "Trap Definition Configuration Command" Resource Parameters Resource Identifier
Type
(name)
Format: the name of the trap ( cold-start | link-down | link-up | auth-failure | change-occured | init-started | lic-key-chg-occr | topology-chg | dhcp-sess-pre | radius-server-failure | login-occured | logout-occured | trapmngr-chg-occr | mst-genral | mst-error | mst-protocol-mig | mst-inv-bpdu-rx | mst-reg-conf-chg ) Possible values: - cold-start : the node is reinitializing - link-down : one of the communication links of the node has failed - link-up : one of the communication links of the node became operational - auth-failure : authentication failure - change-occured : a configuration or operational change occurred
112
Released
Description
3HH-08079-DDCA-TCZZA
01
4 Trap Configuration Commands
Resource Identifier
Type
Description
- init-started : the node is initializing, IP connectivity is established - lic-key-chg-occr : the number of license keys changed - topology-chg : topology changed (scope of cluster management) - dhcp-sess-pre : dhcp session preempted - radius-server-failure : radius server failed - login-occured : login occured - logout-occured : logout occured - trapmngr-chg-occr : trap manager change occured - mst-genral : mstp general events - mst-error : mstp error events - mst-protocol-mig : mstp port protocol migration - mst-inv-bpdu-rx : mstp invalid packet received - mst-reg-conf-chg : mstp region configuration change
Table 4.2-2 "Trap Definition Configuration Command" Command Parameters Parameter
Type
Description
priority
Parameter type: Format: ( urgent | high | medium | low ) Possible values: - urgent : urgent - needs to be informed immediately - high : high priority trap - medium : medium priority trap - low : low priority trap
optional parameter the trap priority
3HH-08079-DDCA-TCZZA 01
Released
113
4 Trap Configuration Commands
4.3 Trap Manager Configuration Command Command Description This command allows the operator to configure an SNMP manager, which will receive traps when an event occurs in the system. The SNMP manager can easily be flooded by events if something happens to the system. This command allows the operator to specify which traps the manager is interested in (trap filtering) and how the traps must be distributed in time (trap shaping). Traps that cannot be delivered will be dropped. The Following traps will be sent as a part of changeOccuredTrap alarm-chg-trap, phys-line-trap, eqpt-change-trap, success-set-trap, other-alarm-trap, warning-trap, minor-trap, major-trap, critical-trap, redundancy-trap, eqpt-prot-trap, craft-login-trap, restart-trap, ntr-trap.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure trap ( no manager (address) ) | ( manager (address) [ no priority | priority ] [ [ no ] cold-start-trap ] [ [ no ] link-down-trap ] [ [ no ] link-up-trap ] [ [ no ] auth-fail-trap ] [ [ no ] change-trap ] [ [ no ] init-started-trap ] [ [ no ] lic-key-chg-occr ] [ [ no ] topology-chg ] [ [ no ] dhcp-sess-pre ] [ [ no ] alarm-chg-trap ] [ [ no ] phys-line-trap ] [ [ no ] eqpt-change-trap ] [ [ no ] success-set-trap ] [ [ no ] other-alarm-trap ] [ [ no ] warning-trap ] [ [ no ] minor-trap ] [ [ no ] major-trap ] [ [ no ] critical-trap ] [ [ no ] redundancy-trap ] [ [ no ] eqpt-prot-trap ] [ [ no ] craft-login-trap ] [ [ no ] restart-trap ] [ [ no ] ntr-trap ] [ [ no ] rad-srvr-fail ] [ [ no ] login-occr-trap ] [ [ no ] logout-occr-trap ] [ [ no ] trapmngr-chg-trap ] [ [ no ] mst-genral ] [ [ no ] mst-error ] [ [ no ] mst-protocol-mig ] [ [ no ] mst-inv-bpdu-rx ] [ [ no ] mst-reg-conf-chg ] [ no max-per-window | max-per-window ] [ no window-size | window-size ] [ no max-queue-size | max-queue-size ] [ no min-interval | min-interval ] [ no min-severity | min-severity ] )
Command Parameters Table 4.3-1 "Trap Manager Configuration Command" Resource Parameters Resource Identifier
Type
Description
(address)
Format: : Field type - IPv4-address Field type - trap port number - range: [1...65535]
the address of the manager
Table 4.3-2 "Trap Manager Configuration Command" Command Parameters
114
Released
3HH-08079-DDCA-TCZZA
01
4 Trap Configuration Commands
Parameter
Type
Description
[no] priority
optional parameter with default value: "medium" lowest priority a trap should have to be reported
[no] cold-start-trap
Parameter type: Format: ( urgent | high | medium | low ) Possible values: - urgent : urgent - needs to be informed immediately - high : high priority trap - medium : medium priority trap - low : low priority trap Parameter type: boolean
[no] link-down-trap
Parameter type: boolean
[no] link-up-trap
Parameter type: boolean
[no] auth-fail-trap
Parameter type: boolean
[no] change-trap
Parameter type: boolean
[no] init-started-trap
Parameter type: boolean
[no] lic-key-chg-occr
Parameter type: boolean
[no] topology-chg
Parameter type: boolean
[no] dhcp-sess-pre
Parameter type: boolean
[no] alarm-chg-trap
Parameter type: boolean
[no] phys-line-trap
Parameter type: boolean
[no] eqpt-change-trap
Parameter type: boolean
[no] success-set-trap
Parameter type: boolean
[no] other-alarm-trap
Parameter type: boolean
[no] warning-trap
Parameter type: boolean
[no] minor-trap
Parameter type: boolean
[no] major-trap
Parameter type: boolean
3HH-08079-DDCA-TCZZA 01
optional parameter enable sending cold start trap optional parameter enable sending link down trap optional parameter enable sending of link up trap optional parameter enable sending authentication failure trap optional parameter enable sending of change occured trap optional parameter enable sending init started trap optional parameter enable sending licence key changed occured trap optional parameter enable sending topology changed occured trap optional parameter enable sending DHCP session preempted trap optional parameter enable snd nbr alrm chg(part of changeOccurredTrap) optional parameter enable snd phys line chg(part of changeOccurredTrap) optional parameter enable snd eqpt nbr chg(part of changeOccurredTrap) optional parameter enable snd nbr of sets chg(part of changeOccurredTrap) optional parameter enable snd nbr indeterminate chg(part of changeOccurredTrap) optional parameter enable snd nbr warning chg(part of changeOccurredTrap) optional parameter enable snd nbr minor chg(part of changeOccurredTrap) optional parameter enable snd nbr major chg(part of
Released
115
4 Trap Configuration Commands
Parameter
Type
[no] critical-trap
Parameter type: boolean
[no] redundancy-trap
Parameter type: boolean
[no] eqpt-prot-trap
Parameter type: boolean
[no] craft-login-trap
Parameter type: boolean
[no] restart-trap
Parameter type: boolean
[no] ntr-trap
Parameter type: boolean
[no] rad-srvr-fail
Parameter type: boolean
[no] login-occr-trap
Parameter type: boolean
[no] logout-occr-trap
Parameter type: boolean
[no] trapmngr-chg-trap
Parameter type: boolean
[no] mst-genral [no] mst-error
Parameter type: boolean Parameter type: boolean
[no] mst-protocol-mig
Parameter type: boolean
[no] mst-inv-bpdu-rx
Parameter type: boolean
[no] mst-reg-conf-chg
Parameter type: boolean
[no] max-per-window
Parameter type: Format: - maximum allowed number of traps per window - unit: traps - range: [1...20] Parameter type: Format: - the size of a time window for traps - unit: s - range: [0...3600] Parameter type: Format: - maximum number of traps that can be queued - unit: traps - range: [1...20]
[no] window-size
[no] max-queue-size
116
Released
Description changeOccurredTrap) optional parameter enable snd nbr critical chg(part of changeOccurredTrap) optional parameter enable snd nbr redundancy chg(part of changeOccurredTrap) optional parameter enable snd nbr eqpt prot chg(part of changeOccurredTrap) optional parameter enable snd craft login chg(part of changeOccurredTrap) optional parameter enable restart trap(part of changeOccurredTrap) optional parameter enable ntr changes trap(part of changeOccurredTrap) optional parameter enable sending radius server failure trap optional parameter enable sending login occured trap optional parameter enable sending logout occured trap optional parameter enable sending trap manager change occured trap optional parameter optional parameter enable mstp error events trap optional parameter enable mstp port protocol migration trap optional parameter enable mstp invalid packet received trap optional parameter enable mstp region configuration change trap optional parameter with default value: 2 maximum allowed number of traps per window optional parameter with default value: 60 the size of a time window for traps in seconds optional parameter with default value: 10 maximum number of traps that can be queued
3HH-08079-DDCA-TCZZA
01
4 Trap Configuration Commands
Parameter
Type
Description
[no] min-interval
Parameter type: Format: - minimum time interval between two traps - unit: s - range: [0...3600] Parameter type: Format: ( indeterminate | warning | minor | major | critical ) Possible values: - indeterminate : not a definite known severity level - warning : just to inform as a warning - minor : not service affecting - major : service affecting - critical : service breaking
optional parameter with default value: 30 the minimum time between two traps
[no] min-severity
3HH-08079-DDCA-TCZZA 01
optional parameter with default value: "major" lowest severity an alarm must have, to be reported
Released
117
5- Equipment Configuration Commands
5.1 Equipment Configuration Command Tree 5.2 Rack Configuration Command 5.3 Shelf Configuration Command 5.4 Slot Configuration Command 5.5 Applique Configuration Command 5.6 Protection Group Configuration Command 5.7 Protection Element Configuration Command 5.8 External-link-host Configuration Commands 5.9 Host Shelf SFP Configuration Commands 5.10 NE Configuration Command 5.11 Environment Monitoring Configuration Command 5.12 Configure Fan Tray parameters
118
Released
5-119 5-121 5-122 5-124 5-126 5-128 5-129 5-131 5-133 5-135 5-136 5-137
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.1 Equipment Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "Equipment Configuration Commands".
Command Tree ----configure ----equipment ----rack - (index) - [no] description ----shelf - (index) - [no] class - [no] planned-type X [no] unlock - [no] lock X [no] extended-lt-slots - [no] mode - [no] description ----slot - (index) - [no] planned-type - [no] power-down - [no] unlock - [no] alarm-profile - capab-profile - dual-host-ip - dual-host-loc ----applique - (index) - [no] planned-type - [no] applique-profile ----protection-group - (prot-group-id) - [no] admin-status - [no] eps-quenchfactor ----protection-element - (index) - [no] redcy-ctrl-status ----external-link-host - (faceplate-number) - [no] direction ----external-link-assign - (faceplate-number) - [no] remote ----isam - [no] description ----envbox - [no] enable-supervise ----fan-tray
3HH-08079-DDCA-TCZZA 01
Released
119
5 Equipment Configuration Commands
- fanmode
120
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.2 Rack Configuration Command Command Description This command allows the operator to configure the rack. The operator can configure the following parameter: • description: text that describes the location of the rack.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment rack (index) [ no description | description ]
Command Parameters Table 5.2-1 "Rack Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: Field type - the rack number
the physcial position of the rack
Table 5.2-2 "Rack Configuration Command" Command Parameters Parameter
Type
Description
[no] description
Parameter type: Format: - description to help the operator to identify the object - length: x<=127
optional parameter with default value: "" any description to be used by the operator
3HH-08079-DDCA-TCZZA 01
Released
121
5 Equipment Configuration Commands
5.3 Shelf Configuration Command Command Description This command allows the operator to configure the shelf. The operator can configure the following parameters: • class: the classification of the shelf. The following shelf classes are supported: - main-ethernet: supports Ethernet-based traffic. Shelves in this class can contain NT and LT units. There must be at least one shelf of this class in the system. - ext-ethernet: supports Ethernet-based traffic. Shelves in this class can only contain LT units. • • • •
planned-type: the type planned for this shelf. The not-planned parameter indicates that a shelf will not be inserted at this position. unlock: locks or unlocks the shelf. shelf-mode: the shelf mode,applicable to NEP only, and when the shelf mode was changed successfully,the NE will reboot automatically. description: text that describes the location of the shelf.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment shelf (index) [ no class | class ] [ no planned-type | planned-type ] [ [ no ] unlock ] [ [ no ] lock ] [ [ no ] extended-lt-slots ] [ no mode | mode ] [ no description | description ]
Command Parameters Table 5.3-1 "Shelf Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: / Field type - the rack number Field type - the shelf number
the physical identification of the shelf
Table 5.3-2 "Shelf Configuration Command" Command Parameters Parameter
Type
Description
[no] class
Parameter type: Format: ( main-ethernet | ext-ethernet ) Possible values: - main-ethernet : main shelf - supports ethernet-based traffic
optional parameter with default value: "main-ethernet" the class to which the shelf belongs
122
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
Parameter
Type
Description
[no] unlock
- ext-ethernet : extension shelf - supports ethernet-based traffic Parameter type: Format: Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: boolean
[no] lock
Parameter type: boolean
[no] extended-lt-slots
Parameter type: boolean
[no] mode
Parameter type: Format: ( no-extended-lt-slots | extended-lt-slots | no-ntio-slots ) Possible values: - no-extended-lt-slots : no extended lt slots - extended-lt-slots : change to extended lt slots - no-ntio-slots : not changeable Parameter type: Format: - description to help the operator to identify the object - length: x<=127
[no] planned-type
[no] description
3HH-08079-DDCA-TCZZA 01
optional parameter with default value: "not-planned" the planned type of the shelf
obsolete parameter replaced by parameter "lock" the holder is unlocked optional parameter the holder is locked obsolete parameter replaced by parameter "mode" change to extended lt slots optional parameter with default value: "no-extended-lt-slots" change the shelf mode,applicable to NEP and ARAM-E only
optional parameter with default value: "" any description to be used by the operator
Released
123
5 Equipment Configuration Commands
5.4 Slot Configuration Command Command Description This command allows the operator to configure a slot. The slot is identified by the physical slot number. The left-most slot in the shelf is number 1. The following parameters can be configured for the slot: • planned-type: the unit type that will be inserted into the slot. The not-planned parameter indicates that a unit will not be inserted into that slot. • power-down: the operator can power-up or power-down slots. This is only applicable to LSM. • unlock: the operator can lock or unlock a unit. A unit in the locked state cannot be used. This attribute is only supported for the NT (the system will refuse to lock the NT of a simplex system), EXT, and a managed LSM. • alarm-profile: the operator can assign a customizable alarm profile to a remote LT board. This is only applicable for REM and SEM boards • capab-profile:This parameter only applies to LSMs.For BCM based boards default capab-profile is "default" for Intel based boards it is "8vc_default".
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment slot (index) [ no planned-type | planned-type ] [ [ no ] power-down ] [ [ no ] unlock ] [ no alarm-profile | alarm-profile ] [ capab-profile ] [ dual-host-ip ] [ dual-host-loc ]
Command Parameters Table 5.4-1 "Slot Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: ( lt : / / | nt-a | nt-b | nt | acu : / | / / | ext-a : / | ext-b : / | ctrl : / ) Possible values: - lt : lt-slot - nt-a : nt-a slot - nt-b : nt-b slot
the physical number of the slot
124
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
Resource Identifier
Type
Description
- nt : nt slot - ext-a : nt-a slot in an extension shelf - ext-b : nt-b slot in an extension shelf - acu : acu slot - ctrl : ctrl-slot Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the equipment slot number
Table 5.4-2 "Slot Configuration Command" Command Parameters Parameter
Type
Description
[no] planned-type
optional parameter with default value: "not-planned" type of board intended to be in this position
[no] power-down
Parameter type: Format: Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: boolean
[no] unlock
Parameter type: boolean
[no] alarm-profile
Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associate - name : profile name Field type - a printable string - length: x<=32 Parameter type: Format: Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: Format: - IPv4-address Parameter type: Format: ( / | none ) Possible values: - none : no host lsm location Field type - the rack number Field type - the shelf number
capab-profile
dual-host-ip dual-host-loc
3HH-08079-DDCA-TCZZA 01
optional parameter power down the board optional parameter unlock the board optional parameter with default value: "none" customized alarm profile assigned to this board
optional parameter capability profile assigned to a line board
optional parameter dual host ip optional parameter dual host lsm location
Released
125
5 Equipment Configuration Commands
5.5 Applique Configuration Command Command Description This command allows the operator to configure an applique. The applique is identified by the physical slot number. The left-most slot in the shelf is number 1. The following parameter can be configured for the slot: • planned-type: the applique type to be inserted into the slot. The not-planned parameter indicates that an applique will not be inserted into that slot.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment applique (index) [ no planned-type | planned-type ] [ no applique-profile | applique-profile ]
Command Parameters Table 5.5-1 "Applique Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: the physical number of the ( iont : / applique | / / | lp : / / | ntio-1 | ntio-2 ) Possible values: - iont : an nt applique slot - lp : an lt applique slot - ntio-1 : an nt applique slot in a single or multiple-ntio-shelf - ntio-2 : an nt applique slot in a multiple-ntio-shelf Field type - the rack number Field type - the shelf number Field type - the applique slot number Field type - the LT Applique slot number
126
Released
Description
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
Table 5.5-2 "Applique Configuration Command" Command Parameters Parameter
Type
Description
[no] planned-type
Parameter type: Format: Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: Format: Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help.
optional parameter with default value: "not-planned" type of applique intended to be in this position
[no] applique-profile
3HH-08079-DDCA-TCZZA 01
optional parameter with default value: "not_applicable" capability profile assigned to the applique board
Released
127
5 Equipment Configuration Commands
5.6 Protection Group Configuration Command Command Description This command allows the operator to configure a protection group. The protection group is identified by the eqptProtGroupId attribute (index). The value 1 is reserved for extension chain protection group which is always present and cannot be deleted. The protection group(s) are created implicitly by the system as part of the default configuration. Use "show equipment protection-group" to display the valid protection group identifier(s). Note that the default admin-status for protection-group 1 at system level is locked where it is always unlocked at cli level.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment protection-group (prot-group-id) [ no admin-status | admin-status ] [ no eps-quenchfactor | eps-quenchfactor ]
Command Parameters Table 5.6-1 "Protection Group Configuration Command" Resource Parameters Resource Identifier
Type
Description
(prot-group-id)
Format: - index of protection group
Index in eqpt Prot Group Table
Table 5.6-2 "Protection Group Configuration Command" Command Parameters Parameter
Type
Description
[no] admin-status
Parameter type: Format: ( unlock | lock ) Possible values: - unlock : unlock - lock : lock Parameter type: Format: - timer value for quench mechanish - unit: 1/100 sec
optional parameter with default value: "unlock" changes the administrative-status to lock or unlock
[no] eps-quenchfactor
128
Released
optional parameter with default value: "1440000" timervalue of quenching mechanism, 0 is valid value
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.7 Protection Element Configuration Command Command Description This command allows the operator to configure a protection element. The protection group is identified by the eqptProtGroupId attribute. The value 1 to 9 are reserved for the extension chain protection group which are always present and cannot be deleted. Group 1 corresponding with NT 1+1 group, and Group 2-9 corresponding with possible 8 LT 1+1 groups. The redcy-ctrl-status parameter is used to force a switchover between elements of a protection group or to keep one of the elements active. The forced-active parameter indicates that the NTA or NTB slot or LT slot is configured as active.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment protection-element ]
(index)
[
no
redcy-ctrl-status
|
redcy-ctrl-status
Command Parameters Table 5.7-1 "Protection Element Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: ( lt : / / | nt-a | nt-b | / / ) Possible values: - lt : lt-slot - nt-a : nt-a slot - nt-b : nt-b slot Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the equipment slot number
Index in eqpt Prot Element Table
Table 5.7-2 "Protection Element Configuration Command" Command Parameters
3HH-08079-DDCA-TCZZA 01
Released
129
5 Equipment Configuration Commands
Parameter
Type
Description
[no] redcy-ctrl-status
Parameter type: Format: ( normal | forced_active ) Possible values: - normal : enables redundancy (active or standby) - forced_active : forces the element to be active
optional parameter with default value: "normal" changes the redundancy control status
130
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.8 External-link-host Configuration Commands Command Description This command allows the operator to configure the traffic direction of the configurable external-links on the host expansion card. The configurable parameters are: • direction: The traffic direction. Two directions are supported: - network (default): the direction is configured to allow the trafic from the network - remote-lt : the direction is configured to allow the trafic to the remote line termination card
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment external-link-host ]
(faceplate-number)
[
no
direction
|
direction
Command Parameters Table 5.8-1 "External-link-host Configuration Commands" Resource Parameters Resource Identifier
Type
(faceplate-number)
Format: the faceplate number of the ( configurable external-link | nt : sfp : | ntio-1 : sfp : | ntio-2 : sfp : ) Possible values: - nt : nt-slot - ntio-1 : an nt applique slot in a single or multiple-ntio-shelf - ntio-2 : an nt applique slot in a multiple-ntio-shelf Possible values: - sfp : SFP port - xfp : XFP port Field type - host port number Field type - the faceplate number of the configurable external link
Description
Table 5.8-2 "External-link-host Configuration Commands" Command Parameters Parameter
Type
Description
[no] direction
Parameter type: Format: ( network
optional parameter with default value: "network" the external-link traffic direction
3HH-08079-DDCA-TCZZA 01
Released
131
5 Equipment Configuration Commands
Parameter
Type
Description
| remote-lt ) Possible values: - network : the connection direction is from the network - remote-lt : the connection direction is to the remote line termination card
132
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.9 Host Shelf SFP Configuration Commands Command Description This command allows the operator to configure the association between a host shelf SFP/XFP and a remote LT.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment external-link-assign ]
(faceplate-number)
[
no
remote
|
remote
Command Parameters Table 5.9-1 "Host Shelf SFP Configuration Commands" Resource Parameters Resource Identifier
Type
(faceplate-number)
Format: host shelf SFP/XFP number on ( the faceplate | nt : sfp : | ntio-1 : sfp : | ntio-2 : sfp : ) Possible values: - nt : nt-slot - ntio-1 : an nt applique slot in a single or multiple-ntio-shelf - ntio-2 : an nt applique slot in a multiple-ntio-shelf Possible values: - sfp : SFP port Field type - a host port connected to remote LT Field type - host SFP faceplate number
Description
Table 5.9-2 "Host Shelf SFP Configuration Commands" Command Parameters Parameter
Type
[no] remote
Parameter type: optional parameter with default Format: value: "0/0/0" / / the expansion shelf LSM Field type - the physical number of the expansion rack, 0 stands for no remote Field type - physical nbr of expansion shelf within expansion rack, 0 stands for no remote
3HH-08079-DDCA-TCZZA 01
Description
Released
133
5 Equipment Configuration Commands
Parameter
Type
Description
Field type - the physical number of the slot within expansion shelf, 0 stands for no remote
134
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.10 NE Configuration Command Command Description This command allows the operator to configure the NE. The operator can configure the following parameter: • description: text that describes the location of the ISAM.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment isam [ no description | description ]
Command Parameters Table 5.10-2 "NE Configuration Command" Command Parameters Parameter
Type
Description
[no] description
Parameter type: Format: - description to help the operator to identify the object - length: x<=127
optional parameter with default value: "" any description to be used by the operator
3HH-08079-DDCA-TCZZA 01
Released
135
5 Equipment Configuration Commands
5.11 Environment Monitoring Configuration Command Command Description This command allows the operator to configure environment monitoring status to enable/disable the data relay from an external monitor box connected on the NTIO board of ISAM to the monitor server. The operator can configure the following parameters: • enable-supervise: enable relay of environment monitoring from an external monitor box.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment envbox [ [ no ] enable-supervise ]
Command Parameters Table 5.11-2 "Environment Monitoring Configuration Command" Command Parameters Parameter
Type
Description
[no] enable-supervise
Parameter type: boolean
optional parameter enable environment monitoring relay
136
Released
3HH-08079-DDCA-TCZZA
01
5 Equipment Configuration Commands
5.12 Configure Fan Tray parameters Command Description This command allows the operator to configure the fan tray parameter fanmode. The fanmode determines the applied speed of the fan trays. This is effective only if intelligent fan packs are installed. Traditional fan packs (A-fans) do not support speed change, the 'classic' mode applies.
User Level The command can be accessed by operators with equipment privileges, and executed by operators with equipment privileges.
Command Syntax The command has the following syntax: > configure equipment fan-tray [ fanmode ]
Command Parameters Table 5.12-2 "Configure Fan Tray parameters" Command Parameters Parameter
Type
fanmode
Parameter type: optional parameter Format: Fan Tray mode ( auto | eco | protect | classic ) Possible values: - auto : runs in average mode; fan speeds determined by predefined thermal margins - eco : runs in 'green' mode; minimal thermal margins - protect : runs in protected mode; wider thermal settings wrt auto - classic : fixed fan speed; no SW control
3HH-08079-DDCA-TCZZA 01
Description
Released
137
6- xDSL Configuration Commands
6.1 xDSL Configuration Command Tree 6.2 xDSL Common Service Profile Configuration Command 6.3 xDSL Common Spectrum Profile Configuration Command 6.4 xDSL Artificial Noise Downstream Configuration Command 6.5 xDSL Spectrum Profile for ADSL/ADSL2 Configuration Command 6.6 xDSL Spectrum Profile for RE-ADSL2 Configuration Command 6.7 xDSL Spectrum Profile for ADSL2 Plus Configuration Command 6.8 ADSL2-plus Custom PSD shape Configuration Command 6.9 xDSL Spectrum Profile for VDSL Configuration Command 6.10 VDSL Ghs Tones Transmission Power Control Configuration Command 6.11 VDSL Custom PSD shape Downstream Configuration Command 6.12 VDSL Custom RX PSD shape Upstream Configuration Command 6.13 VDSL Power Back Off Configuration Command 6.14 xDSL Spectrum Profile for VDSL2 Configuration Command 6.15 VDSL2 Custom PSD shape Downstream Configuration Command 6.16 VDSL2 Custom PSD shape Upstream Configuration Command 6.17 VDSL2 Custom RX PSD shape Upstream Configuration Command 6.18 VDSL2 Virtual Noise Downstream Configuration Command 6.19 VDSL2 Virtual Noise Upstream Configuration Command 6.20 VDSL2 Power Back Off Configuration Command 6.21 xDSL DPBO Profile Configuration Command 6.22 xDSL DPBO Mode Independent Custom PSD Mask Configuration Command 6.23 xDSL DPBO Exchange PSD Mask Configuration Command 6.24 xDSL RTX Profile Configuration Command 6.25 xDSL Vectoring Profile Configuration Command 6.26 xDSL Vectoring Control Entity Profile Configuration Command 6.27 xDSL Line Configuration Command 6.28 xDSL Line TCA Threshold Configuration Command 6.29 xDSL Board Configuration Command 6.30 xDSL Per Line Overrule Configuration Command
138
Released
6-140 6-148 6-152 6-158 6-160 6-163 6-165 6-169 6-171 6-178 6-180 6-182 6-184 6-185 6-191 6-193 6-195 6-197 6-199 6-201 6-203 6-205 6-207 6-209 6-213 6-216 6-219 6-224 6-227 6-229
3HH-08079-DDCA-TCZZA
01
6.31 xDSL Overrule Noise Psd Shape Downstream Configuration Command 6.32 xDSL Overrule Noise Psd Shape Upstream Configuration Command 6.33 xDSL INS Near End Configuration Command 6.34 xDSL INS Far End Configuration Command 6.35 xDSL Vectoring Processing Board Configuration Command
3HH-08079-DDCA-TCZZA 01
6-236 6-238 6-240 6-242 6-244
Released
139
6 xDSL Configuration Commands
6.1 xDSL Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "xDSL Configuration Commands".
Command Tree ----configure ----xdsl ----[no] service-profile - (index) - name X (scope) - version - [no] ra-mode-down - [no] ra-mode-up - [no] min-bitrate-down - [no] min-bitrate-up - [no] plan-bitrate-down - [no] plan-bitrate-up - [no] max-bitrate-down - [no] max-bitrate-up - [no] max-delay-down - [no] max-delay-up - [no] max-delay-var-dn - [no] max-delay-var-up - [no] memory-down - [no] imp-noise-prot-dn - [no] imp-noise-prot-up - [no] inp-wo-erasure-dn - [no] inp-wo-erasure-up - [no] min-l2-br-down - [no] active ----[no] spectrum-profile - (index) - name X (scope) - version - [no] dis-ansi-t1413 - [no] dis-etsi-dts - [no] dis-g992-1-a - [no] dis-g992-1-b - [no] dis-g992-2-a - [no] dis-g992-3-a - [no] dis-g992-3-b - [no] g992-3-aj - [no] g992-3-l1 - [no] g992-3-l2 - [no] g992-3-am - [no] g992-5-a - [no] g992-5-b - [no] ansi-t1.424
140
Released
3HH-08079-DDCA-TCZZA
01
6 xDSL Configuration Commands
- [no] dis-etsi-ts - [no] itu-g993-1 - [no] ieee-802.3ah - [no] g992-5-aj - [no] g992-5-am - [no] g993-2-8a - [no] g993-2-8b - [no] g993-2-8c - [no] g993-2-8d - [no] g993-2-12a - [no] g993-2-12b - [no] g993-2-17a - [no] g993-2-30a - [no] min-noise-down - [no] min-noise-up - [no] trgt-noise-down - [no] trgt-noise-up - [no] max-noise-down - [no] max-noise-up - [no] carrier-mask-down - [no] carrier-mask-up - [no] rf-band-list - [no] power_mgnt_mode - [no] l0-time - [no] l2-time - [no] l2-agpow-red-tx - [no] modification - [no] active - [no] rau-noise-down - [no] rau-noise-up - [no] rau-time-down - [no] rau-time-up - [no] rad-noise-down - [no] rad-noise-up - [no] rad-time-down - [no] rad-time-up - [no] l2-agpw-to-red-tx ----artificial-noise-down - (psd-point) - [no] frequency - [no] psd ----adsl-adsl2 X [no] proprietary-feat - [no] propr-feat-value - [no] max-agpowlev-down - [no] max-agpowlev-up - [no] max-psd-down - [no] max-psd-up - [no] pbo-mode-up - [no] max-recv-power-up - [no] psd-mask-up ----re-adsl X [no] proprietary-feat - [no] propr-feat-value - [no] max-agpowlev-down - [no] max-agpowlev-up - [no] max-psd-down - [no] max-psd-up
3HH-08079-DDCA-TCZZA 01
Released
141
6 xDSL Configuration Commands
- [no] pbo-mode-up - [no] max-recv-power-up ----adsl2-plus X [no] proprietary-feat - [no] propr-feat-value - [no] max-agpowlev-down - [no] max-agpowlev-up - [no] max-psd-down - [no] max-psd-up - [no] psd-shape-down - [no] pbo-mode-up - [no] max-recv-power-up - [no] psd-mask-up ----cust-psd-pt-down - (psd-point) - [no] frequency - [no] psd ----vdsl X [no] proprietary-feat - [no] propr-feat-value - [no] vdsl-band-plan - [no] optional-band - [no] optional-endfreq - [no] adsl-band - [no] max-agpowlev-down - [no] max-agpowlev-up - [no] psd-shape-down - [no] psd-shape-up X [no] pbo-mode-down - [no] pbo-mode - [no] rx-psd-shape-up - [no] ghstones-pwr-mode - [no] max-band - [no] max-freq - [no] m-psd-level-down - [no] m-psd-level-up - [no] psd-pbo-par-a-up - [no] psd-pbo-par-b-up - [no] cust-psd-sc-down - [no] cust-psd-ty-down - [no] cust-rx-psd-sc-up - [no] cust-rx-psd-ty-up - [no] opt-startfreq ----ghstone-set-pwr-ctrl - [no] a43 - [no] b43 - [no] a43c - [no] v43 ----cust-psd-pt-down - (psd-point) - [no] frequency - [no] psd ----cust-rx-psd-pt-up - (psd-point) - [no] frequency - [no] psd ----pbo - (band) - [no] param-a
142
Released
3HH-08079-DDCA-TCZZA
01
6 xDSL Configuration Commands
- [no] param-b ----vdsl2 X [no] proprietary-feat - [no] propr-feat-value - [no] max-agpowlev-down - [no] max-agpowlev-up - [no] psd-shape-down - [no] cs-psd-shape-dn - [no] cs-psd-shape-up - [no] psd-shape-up - [no] rx-psd-shape-up - [no] psd-pbo-e-len-up - [no] m-psd-level-down - [no] m-psd-level-up - [no] psd-pbo-par-a-up - [no] psd-pbo-par-b-up - [no] v-noise-snr-down - [no] v-noise-snr-up - [no] v-noise-psd-down - [no] v-noise-psd-up - [no] cust-psd-sc-down - [no] cust-psd-ty-down - [no] cust-psd-sc-up - [no] cust-psd-ty-up - [no] cust-rx-psd-sc-up - [no] cust-rx-psd-ty-up ----cust-psd-pt-down - (psd-point) - [no] frequency - [no] psd ----cust-psd-pt-up - (psd-point) - [no] frequency - [no] psd ----cust-rx-psd-pt-up - (psd-point) - [no] frequency - [no] psd ----v-noise-psd-pt-down - (psd-point) - [no] frequency - [no] psd ----v-noise-psd-pt-up - (psd-point) - [no] frequency - [no] psd ----pbo - (band) - [no] equal-fext - [no] param-a - [no] param-b ----[no] dpbo-profile - (index) - name - [no] es-elect-length - [no] es-cable-model-a - [no] es-cable-model-b - [no] es-cable-model-c - [no] min-usable-signal
3HH-08079-DDCA-TCZZA 01
Released
143
6 xDSL Configuration Commands
- [no] min-frequency - [no] max-frequency - [no] rs-elect-length - [no] muf-control - [no] offset - [no] active - [no] modification ----micpsd-pt-down - (psd-point) - [no] frequency - [no] psd ----epsd-pt-down - (psd-point) - [no] frequency - [no] psd ----[no] rtx-profile - (index) - name - version - [no] rtx-mode-dn - [no] rtx-mode-up - [no] min-exp-thrpt-dn - [no] min-exp-thrpt-up - [no] plan-exp-thrpt-dn - [no] plan-exp-thrpt-up - [no] max-exp-thrpt-dn - [no] max-exp-thrpt-up - [no] max-net-rate-dn - [no] max-net-rate-up - [no] min-delay-dn - [no] min-delay-up - [no] max-delay-dn - [no] max-delay-up - [no] min-inp-shine-dn - [no] min-inp-shine-up - [no] min-inp-rein-dn - [no] min-inp-rein-up - [no] int-arr-time-dn - [no] int-arr-time-up - [no] shine-ratio-dn - [no] shine-ratio-up - [no] leftr-thresh-dn - [no] leftr-thresh-up - [no] active - [no] modification ----[no] vect-profile - (index) - name - version - [no] fext-cancel-up - [no] fext-cancel-dn - [no] dis-gvect-cpe - [no] gvecfriend-dn-cpe - [no] legacy-cpe - [no] band-control-up - [no] band-control-dn - [no] vect-leav-thresh - [no] active
144
Released
3HH-08079-DDCA-TCZZA
01
6 xDSL Configuration Commands
- [no] modification ----[no] vce-profile - (index) - name - version - [no] vce-gain-mode - [no] vce-join-timeout - [no] vce-min-par-join - [no] vce-hist-pcoder - [no] vce-band-plan - [no] active - [no] modification ----line - (if-index) - [no] service-profile - [no] spectrum-profile - [no] dpbo-profile - [no] rtx-profile - [no] vect-profile - [no] ansi-t1413 - [no] etsi-dts - [no] g992-1-a - [no] g992-1-b - [no] g992-2-a - [no] g992-3-a - [no] g992-3-b - [no] g992-3-aj - [no] g992-3-l1 - [no] g992-3-l2 - [no] g992-3-am - [no] g992-5-a - [no] g992-5-b - [no] ansi-t1.424 - [no] etsi-ts - [no] itu-g993-1 - [no] ieee-802.3ah - [no] g992-5-aj - [no] g992-5-am - [no] g993-2-8a - [no] g993-2-8b - [no] g993-2-8c - [no] g993-2-8d - [no] g993-2-12a - [no] g993-2-12b - [no] g993-2-17a - [no] g993-2-30a - [no] carrier-data-mode - [no] admin-up X bonding-mode - [no] transfer-mode - [no] imp-noise-sensor - [no] vect-qln-mode ----tca-line-threshold - [no] enable - [no] es-nearend - [no] ses-nearend - [no] uas-nearend - [no] leftr-nearend
3HH-08079-DDCA-TCZZA 01
Released
145
6 xDSL Configuration Commands
- [no] leftr-day-nearend - [no] es-day-nearend - [no] ses-day-nearend - [no] uas-day-nearend - [no] es-farend - [no] ses-farend - [no] uas-farend - [no] es-day-farend - [no] ses-day-farend - [no] uas-day-farend - [no] leftr-farend - [no] leftr-day-farend ----board - (board-index) - [no] dpbo-profile - [no] vce-profile ----[no] overrule-data - (if-index) - [no] max-bitrate-down - [no] max-bitrate-up - [no] max-delay-down - [no] max-delay-up - [no] imp-noise-prot-dn - [no] imp-noise-prot-up - [no] trgt-noise-down - [no] trgt-noise-up - [no] max-psd-down - [no] max-psd-up - [no] carrier-mask-down - [no] carrier-mask-up - [no] noise-psd-mode-dn - [no] noise-psd-mode-up - [no] rtx-mode-dn - [no] rtx-mode-up - [no] max-net-rate-dn - [no] max-net-rate-up - [no] max-exp-thrpt-dn - [no] max-exp-thrpt-up - [no] min-inp-shine-dn - [no] min-inp-shine-up - [no] min-inp-rein-dn - [no] min-inp-rein-up - [no] min-delay-dn - [no] min-delay-up - [no] rtx-max-delay-dn - [no] rtx-max-delay-up - [no] shine-ratio-dn - [no] shine-ratio-up - [no] leftr-thresh-dn - [no] leftr-thresh-up - [no] memory-down - [no] modification - [no] active ----noise-psd-pt-down - (psd-point) - [no] frequency - [no] psd ----noise-psd-pt-up
146
Released
3HH-08079-DDCA-TCZZA
01
6 xDSL Configuration Commands
- (psd-point) - [no] frequency - [no] psd ----imp-noise-sensor ----near-end - (if-index) - [no] inm-mode - [no] inm-eq-inp-mode - [no] ins-sensitivity - [no] inm-cluster-cont - [no] inm-iat-offset - [no] inm-iat-step ----far-end - (if-index) - [no] inm-mode - [no] inm-eq-inp-mode - [no] ins-sensitivity - [no] inm-cluster-cont - [no] inm-iat-offset - [no] inm-iat-step ----vp-board - (board-index) - vp-link - [no] lt-expect
3HH-08079-DDCA-TCZZA 01
Released
147
6 xDSL Configuration Commands
6.2 xDSL Common Service Profile Configuration Command Command Description This command allows the operator to manage the DSL service profile. The service profile groups all parameters on DSL service level (data rates, Rate Adaption mode, delay, ...). The service parameters are common for all DSL flavors. DESCRIPTION FOR THE COMMAND PARAMETER-SCOPE:The combination scope+profile must be unique.Typically local-profile must be used especially when configuring via CLI.Use of network-profile is depreciated.The network-profile was foreseen to allow management agents to define network-wide unique profiles,independent of what local profiles may have been created. DESCRIPTION FOR THE COMMAND PARAMETER max-delay-down and max-delay-up:The delay is expressed in milliseconds.Range: 1 to 63 ms in steps of 1 ms with 1 as special value.The value 1 is used to specify that fast or pseudo fast latency (i.e. no interleaving).
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure xdsl ( no service-profile (index) ) | ( service-profile (index) name [ (scope) ] [ version ] [ no ra-mode-down | ra-mode-down ] [ no ra-mode-up | ra-mode-up ] [ no min-bitrate-down | min-bitrate-down ] [ no min-bitrate-up | min-bitrate-up ] [ no plan-bitrate-down | plan-bitrate-down ] [ no plan-bitrate-up | plan-bitrate-up ] [ no max-bitrate-down | max-bitrate-down ] [ no max-bitrate-up | max-bitrate-up ] [ no max-delay-down | max-delay-down ] [ no max-delay-up | max-delay-up ] [ no max-delay-var-dn | max-delay-var-dn ] [ no max-delay-var-up | max-delay-var-up ] [ no memory-down | memory-down ] [ no imp-noise-prot-dn | imp-noise-prot-dn ] [ no imp-noise-prot-up | imp-noise-prot-up ] [ [ no ] inp-wo-erasure-dn ] [ [ no ] inp-wo-erasure-up ] [ no min-l2-br-down | min-l2-br-down ] [ [ no ] active ] )
Command Parameters Table 6.2-1 "xDSL Common Service Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - a profile index value - range: [1...256]
index of the profile
Table 6.2-2 "xDSL Common Service Profile Configuration Command" Command Parameters
148
Released
3HH-08079-DDCA-TCZZA
01
6 xDSL Configuration Commands
Parameter
Type
Description
name
Parameter type: Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1<=x<=32 Format: local-profile Possible values: - local-profile : the local profile Parameter type: Format: - a signed integer Parameter type: Format: ( operator-ctrld | automatic | dynamic ) Possible values: - operator-ctrld : operator controlled rate adaptive mode downstream - automatic : automatic rate adaptive mode at startup downstream - dynamic : dynamic rate adaptive mode at startup and showtime in downstream Parameter type: Format: ( operator-ctrld | automatic | dynamic ) Possible values: - operator-ctrld : operator controlled rate adaptive mode upstream - automatic : automatic rate adaptive mode at startup upstream - dynamic : dynamic rate adaptive mode at startup and showtime in upstream Parameter type: Format: - a bit rate value - unit: kbps - range: [0...262143] Parameter type: Format: - a bit rate value - unit: kbps - range: [0...262143] Parameter type: Format: - a bit rate value - unit: kbps - range: [0...262143] Parameter type: Format: - a bit rate value - unit: kbps - range: [0...262143] Parameter type: 
