Clean-industrial-and-institutional-cleaning-formulary-brochure.pdf

Industrial and Institutional Cleaning Formulary 2010

» Tomad Tomadol ol Ethoxylated Alcohols » Tomam Tomamine ine Ether Amines & Derivatives ®

®

Table of Contents I. Hard Surface Cleaners A. All-Purpose All-Purpose Concentrates S-100 I- 1 0 4 C-200 S-111 C-201 C-202 C-203 C-204 S-102 I- 1 0 8 C-300

Page Alkaline Glycol Ether Cleaner Anionic/Nonionic Heavy Duty Cleaner Anionic/Nonionic Concentrate d-Limonene Hard Surface Cleaner and Degreaser General Purpose Concentrate—Phosphate General Purpose Concentrate—Non-Phosphate Non-Phosphate Premium Concentrate—Hard Water Non-Phosphate Premium Concentrate—Lower pH Sodium Metasilicate Glycol Ether Cleaner Solvent-Free Alkaline Cleaner Solvent-Free Hard Surface Concentrate

1 1 1 2 2 2 3 3 3 4 4

Degreaser for Hard Water Degreaser Concentrate for High Pressure Spray General Purpose Degreaser Heavy-Duty Degreaser Low-VOC Concentrated Degreaser Low-VOC Easy Rinse Degreaser Concentrate Non-Phosphate Degreaser Ready-to-Use Degreaser Solvent-Free Degreaser Concentrate Thickened Water Rinsable Degreaser

5 5 5 6 6 6 6 7 7 7

Degreasers D-200 D-201 D-202 NP-101 D-300 D-301 D-302 D-303 D-304 S-105

Solvent Cleaners S-204 S-300 S-301 S-120 S-104 S-112 S-200 S-201 S-202 S-203

d-Limonene Cleaner Blooming d-Limonene Microemulsion Clear Diluting d-Limonene Microemulsion Dipentene Microemulsions Graffiti Remover Kerosene Emulsion Cleaner Pine Oil Cleaner—Premium Pine Oil Cleaner—Standard Solvent Degreaser, Flush-Off Type—Premium Solvent Degreaser, Flush-Off Type—Standard

8 8 8 9 9 9 10 10 10 11

Ready-to-Use and Spray-and-Wipe R-200 R-300 R-301 I- 1 1 0 R-201 R-302 R-303 R-304

All-Purpose Spray-and-Wipe Biodegradable and Solvent-Free Hard Surface Cleaner Biodegradable and Solvent-Free Multi-Surface Spray-and-Wipe Light-Duty Neutral Cleaner Leather, Vinyl and Plastic Cleaner Ready-to-Use Hard Surface Cleaner Ready-to-Use Multi-Surface Cleaner Soy-Based All-Purpose Cleaner

I

12 12 12 12 13 13 13 13

Table of Contents

B. Industrial Dairy Cleaners F- 20 0 F- 30 0 F- 30 1

Page Dairy Farm Acid Cleaner Dairy Alkaline Cleaner Foaming Acidic Dairy Cleaner

14 14 14

Food and Beverage Cleaners F- 20 1 F- 20 2 S-116 I- 1 1 6 F- 30 2 F- 30 3 F- 30 4 F- 30 5

Bottle Wash General Food Industry Cleaner Food Ser vice Degreasers High-Foaming Smokehouse Cleaner Oven Cleaner—Premium Oven Cleaner—Standard Meat Processing Cleaner Solvent-Free Food Industr y Degreaser

15 15 15 16 16 16 17 17

High Pressure Wash Low-Foam Concentrate Low-Foam Spray Cleaner

18 18 18

Acid-Based Metal Cleaner Alkaline Metal Cleaner—Premium Concentrate Alkaline Metal Cleaner—Standard Concentrate Heavy Oil Metal Cleaner Low-Foam Metal Cleaner Low-Foam Easy Rinse Metal Cleaner Flash-Foaming Metal Cleaner Low-Residue Metal Cleaner Metal Parts Degreaser Spray Cleaner for De-Oiling Acid Aluminum Brightener—Premium Brightener—Premium Acid Aluminum Brightener—Standard Non-Acid Aluminum Brightener Solvent-Based Aluminum Brightener Alkaline Aluminum Cleaner—Premium Alkaline Aluminum Cleaner—Standard

19 19 19 20 20 20 21 21 21 21 22 22 22 23 23 23

Low-Foam Cleaners L F- 1 1 1 L F- 1 1 5 L F- 1 0 7

Metal Cleaners I- 1 0 1 M-200 M-201 M-202 L F- 1 1 4 M-300 M-301 M-302 M-303 M-203 A-102, A-103 M-204 I- 1 1 3 S-113 I- 1 0 2 M-205

Miscellaneous Industrial Cleaners I- 1 0 6 I- 1 0 7 S-108 I- 1 2 1

Liquid Drain Opener Industrial Floor Stripper Paint Stripper Thickened Alkaline Cleaners

24 24 24 25

Acid Rust Remover

25

Built Steam Cleaner Heavy-Duty Steam Cleaner Non-Caustic Steam Cleaner

26 26 26

Rust Removers M-206

Steam Cleaners I- 1 0 5 I- 1 0 9 I- 1 1 4

II II

Table of Contents

C. Institutional Acid Cleaners Cleaners A-113 A-110 A-106 A-104 A-115 A-111 A-105 A-112

Page Thickened Acetic Acid Cleaners Thickened Formic Acid Cleaner Viscous Hydrochloric/Phosphoric Acid Cleaner Viscous Organic Acid Cleaners Thickened Oxalic Acid Cleaner Concentrated Phosphoric Acid Cleaners Viscous Phosphoric Acid Cleaner Viscous Sulfamic Acid Cleaners

27 27 27 28 28 28 29 29

Mixed Acid Bath Cleaner Bath and Tile Cleaner Citric Acid Bowl Cleaner Hydrochloric Acid Bowl Cleaner Hydrochloric/Phosphoric Acid Bowl Cleaner Mixed Acid Bowl Cleaner Phosphoric Acid Bowl Cleaner

30 30 30 30 31 31 31

Auto Dish Detergent with Anti-Scale Auto Dish Rinse Aid for Poor Water Quality Auto Dish Rinse Aid with Tea Stain Remover Hand Dishwash—Premium Hand Dishwash—Standard Hand Dishwash—Economy Pearlescent Hand Dishwash

32 32 32 32 33 33 33

Concrete and Garage Floor Cleaner Concrete and Garage Floor Cleaner—Low Foam Low-Foam Floor Cleaners Machine Floor Scrubber Wax Stripper and Cleaner Wax Stripper—Premium Wax Stripper—Standard Wax Stripper—Low Foam

34 34 34 35 35 35 36 36

Acidic Glass Cleaner Ammoniacal Glass Cleaner Glass Cleaner without Ammonia Window Cleaner with Water Repellency

37 37 37 37

Bathroom Cleaners B-102 I- 3 0 0 A-114 A-109 B-101 I- 3 0 1 B-100

Dishwash I- 3 0 2 I- 3 0 3 I- 3 0 4 D-102 I- 2 0 0 D-104 D-103

Floor Cleaners I- 2 0 1 L F- 1 1 2 L F- 1 0 6 L F- 1 1 0 L F- 1 0 9 I- 1 0 7 I- 2 0 2 L F- 1 1 3

Glass Cleaners I- 3 0 5 I- 3 0 6 I- 3 0 7 I- 3 0 8

Rug and Upholstery Cleaners C-100 I- 3 0 9 I- 2 0 3 I- 2 0 4 L F- 1 0 8 I- 2 0 5

Carpet Antistat Carpet Prespotter Carpet Steam Cleaner “Dry Brittle” Liquid Cleaner Low-Foam Carpet Cleaner Rug and Upholster y Shampoo

III

38 38 38 39 39 39

Table of Contents Wall and Tile Cleaners I-206 I-207

Page Wall and Tile Concentrate Wall and Tile Spray Cleaner

40 40

II. Laundry – Commercial A. Liquid Detergents L-301 L-302 L-303 L-304 L-305 L-306 L-307 L-200 L-308 L-309 L-310 L-311 L-312

Highly Alkaline Built Liquid—Non-Phosphate Highly Alkaline Built Liquid—with Phosphate Non-Caustic, Non-Phosphate Built Liquid Two-Part Built Liquid for Low Temperature Institutional Laundry—Part A Two-Part Built Liquid for Low Temperature Industrial Laundry—Part A Two-Part Built Liquid for Healthcare and Hospitality Laundry—Part A Two-Part Built Liquid with Solvent Base for Industrial Laundry—Part A Two-Part Built Liquid Builder Solutions—Part B Light-Duty 2X Concentrated Liquid Light-Duty 2X Concentrated Liquid with Bleach Light-Duty Liquid for Low Temperature Laundry Blood Stain Remover Prespotter

41 41 41 42 42 42 42 43 43 43 44 44 44

Industrial Built Powder Light-Duty Powder Light-Duty Powder with Bleach and Enzymes Economy Powder for Low Temperature Laundry Non-Phosphate Shirt Laundry Premium Shirt Laundry

45 45 46 46 47 47

B. Powders L-313 L-314 L-315 L-316 L-317 L-318

III. Miscellaneous A. Foam Markers V-200 V-201

Foam Marker Concentrate—High Viscosity Foam Marker Concentrate—Low Viscosity

48 48

The information contained herein is offered without charge for use by technically qualified personnel at their discretion and risk. All statements, technical information and recommendations contained herein are based on tests and data which we believe to be reliable, but the accuracy or completeness thereof is not guaranteed and no warranty of any kind is made with respect thereto.

IV

All-Purpose » Concentrates

Hard Surface Cleaners Alkaline Glycol Ether Cleaner COMPONENT Soft water

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Sodium gluconate 42°Sodium silicate 3.22/1 Potassium hydroxide (45%) Ethylene glycol butyl ether Tomamine Alkali Surfactant Tomadol 91-8 surfactant pH Specific gravity, 20/20 °C APPLICATIONS Hard surface cleaner. Grill cleaner. Engine degreaser.

Formula S-100 WT % 66.0

MIXING INSTRUCTIONS Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix well.

1.0 1.0 10.0 10.0 5.0 5.0 2.0 >13 1.17

Add sodium gluconate and mix well. Add sodium silicate and mix well. Add potassium hydroxide and mix well. Add ethylene glycol butyl ether and mix well. Add Tomamine Alkali Surfactant and mix well. Add Tomadol 91-8 surfactant and mix well.

USE DILUTION 12:1 to 30:1

Anionic/Nonionic Heavy Duty Cleaner COMPONENT

Soft water Ethylenediamine tetraacetic acid, tetrasodium salt (100%) Potassium hydroxide (45%) Tetrapotassium pyrophosphate Potassium silicate Dodecylbenzene sulfonic acid, sodium salt (60%) Tomadol 91-8 or Tomadol 900 surfactant Tomamine Alkali Surfactant pH Specific gravity 20/20 °C

Formula I-104 WT %

MIXING INSTRUCTIONS Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix well to dissolve. Add potassium hydroxide and mix well. Add tetrapotassium pyrophosphate and mix well. Add potassium silicate and mix well. Add dodecylbenzene sulfonic acid and mix well. Add Tomadol 91-8 or Tomadol 900 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well.

80.0 0.5 5.0 3.0 3.0 3.5 2.0 3.0 13.9 1.06

APPLICATIONS Hard surface cleaner.


Anionic/Nonionic Concentrate COMPONENT Water

Tomadol 23-6.5 surfactant C12 LAS (60%)* Sodium carbonate Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis)** Tomamine Alkali Surfactant

Formula C-200 WT % 78.9

MIXING INSTRUCTIONS Add Tomadol 23-6.5 surfactant to water and mix well. Add linear dodecylbenzene sulfonate (60%) and mix until dissolved. Add sodium carbonate and mix until dissolved. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add Tomamine Alkali Surfactant and mix until homogeneous. Add dye and fragrance as desired.

4.8 3.3 4 6 3

*Calsoft® L-60 Slurry, Pilot Chemical Co mpany, or equivalent product. **Can be replaced with sodium citrate. When using sodium citrate, increase Tomamine Alkali Surfactant to 5% for good temperature stability. Viscosity @ 73 °F, cps 23 pH 11.3 Phase coalescence temperature, °F >176 APPLICATIONS USE DILUTION Hard surface cleaner. 2 ounces/gallon

1


Hard Surface Cleaners d-Limonene Hard Surface Cleaner and Degreaser COMPONENT d-Limonene

Tomamine E-14-5 surfactant Tomamine AO-14-2 surfactant Tomamine Q-17-2 surfactant Tomadol 91-8 surfactant Soft water Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Tomamine Alkali Surfactant pH Specific gravity, 20/20 °C APPLICATIONS Hard surface cleaning.

Formula S-111

WT % 7.0

MIXING INSTRUCTIONS Add d-limonene to Tomamine E-14-5 surfactant and mix well. Add Tomamine AO-14-2 surfactant and mix well. Add Tomamine Q-17-2 surfactant and mix well. Add Tomadol 91-8 surfactant and mix well. Add and mix water slowly until homogeneous. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well. Add Tomamine Alkali Surfactant and mix well.

3.0 2.0 2.0 3.0 77.0 5.0 1.0 10.6 1.01


General Purpose Concentrate—Phosphate COMPONENT

Water Tomadol 91-6 surfactant Tomadol 91-2.5 surfactant Sodium metasilicate, pentahydrate Trisodium phosphate, anhydrous Phosphate ester* *TritonTM H-66, The Dow Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Hard surface cleaner.

Formula C-201 WT %

MIXING INSTRUCTIONS

77.5 2.0 2.0 8.3 3.2 7.0

Add Tomadol 91-6 and Tomadol 91-2.5 surfactants to water and mix well. Add phosphate ester and mix well until homogeneous. Add sodium metasilicate, pentahydrate and trisodium phosphate, mixing well until dissolved. Add dye and fragrance as desired.

8 13.2 150 USE DILUTIONS Heavy-duty use: 10:1 Regular-duty use: 16:1 Light-duty use: 32:1

General Purpose Concentrate—Non-Phosphate COMPONENT Water


MIXING INSTRUCTIONS Add Tomadol 91-6 and Tomadol 91-2.5 surfactant to water and mix well.

Tomadol 91-6 surfactant

2.8

Tomadol 91-2.5 surfactant

1.2

Add sodium metasilicate, pentahydrate and mix vigorously until dissolved. Add tetrasodium iminodisuccinate and mix vigorously until dissolved. Add Tomamine Alkali Surfactant and mix well until homogeneous. Add dye and fragrance as desired.

Sodium metasilicate, pentahydrate

11.1

Baypure® CX 100*

1.6

Tomamine Alkali Surfactant

5.0

*Baypure CX 100, LANXESS Corporation. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Hard surface cleaners.

8 13.2 135 USE DILUTIONS: Heavy-duty use: 10:1 Regular-duty use: 16:1 Light-duty use: 32:1

2


Hard Surface Cleaners Non-Phosphate Premium Concentrate—Hard Water COMPONENT

Water Tomadol 91-6 surfactant Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis) Dicarboxylic organic acid*

Formula C-203

WT %

MIXING INSTRUCTIONS

57.8 7.0 14.6 12.6 8.0

Add Tomadol 91-6 surfactant to water and mix well. Add sodium metasilicate, pentahydrate and mix well. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well. Add dicarboxylic organic acid and mix well until homogeneous. Add dye and fragrance as desired.

*Westvaco Diacid®1550, MeadWestvaco Corporation, or equivalent product. Viscosity @ 73 °F, cps 13 pH 13.3 Phase coalescence temperature, °F 158 APPLICATIONS Hard surface cleaner designed for hard water.

USE DILUTION Heavy-duty use: 32:1 Regular-duty use: 64:1

Non-Phosphate Premium Concentrate—Lower pH COMPONENT Water

Tomadol 1-5 surfactant Ethylene glycol monobutyl ether Sodium lauryl ether sulfate (3EO) (60%)* Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis) Sodium sesquicarbonate Sodium xylene sulfonate (40%) *Calfoam® ES-603, Pilot Chemical Company or equivalent product. pH Phase coalescence temperature, °F APPLICATIONS Hard surface cleaner.

Formula C-204

WT % 79.3

MIXING INSTRUCTIONS Add Tomadol 1-5 surfactant to water and mix well.

Add sodium xylene sulfonate and mix well until homogeneous. Add ethylene glycol monobutyl ether and mix well. Add sodium lauryl ether sulfate (3EO), ethylenediamine tetraacetic acid, tetrasodium salt and sodium sesquicarbonate, and mix until dissolved. Add dye and fragrance as desired.

4.0 5.0 1.7 3.5 1.5 5.0 10.3 160

Sodium Metasilicate Glycol Ether Cleaner COMPONENT Soft Water

Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Ethylene glycol butyl ether Tomadol 91-8 surfactant Tomamine Alkali Surfactant pH Specific gravity 20/20 °C APPLICATIONS Hard surface cleaner.


MIXING INSTRUCTIONS Add sodium metasilicate, pentahydrate to water and mix well.

5.0 2.0 5.0 3.0 2.0 12.5 1.04

Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add ethylene glycol butyl ether and mix well. Add Tomadol 91-8 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well until homogeneous.


3


Hard Surface Cleaners Solvent-Free Alkaline Cleaner COMPONENT

Soft water Tetrapotassium pyrophosphate Potassium silicate Potassium hydroxide (45%) Tomadol 91-8 or Tomadol 900 surfactant Tomamine Alkali Surfactant pH Specific gravity 20/20 °F APPLICATIONS Hard surface cleaner.

Formula I-108 WT %

MIXING INSTRUCTIONS

79.0 3.0 3.0 10.0 2.0 3.0 14 1.08

Add tetrapotassium pyrophosphate to water and mix well. Add potassium silicate and mix well. Add potassium hydroxide and mix well. Add Tomadol 91-8 or Tomadol 900 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well until homogeneous.


Solvent-Free Hard Surface Concentrate COMPONENT

Water Trisodium phosphate Sodium metasilicate pentahydrate Sodium hydroxide (50%) Tomadol 900 surfactant Phosphate ester* *Triton H-66, The Dow Chemical Company, or equivalent product. APPLICATIONS Hard surface cleaner.

Formula C-300 WT %

73.0 2.0 7.0 3.0 10.0 5.0

4

MIXING INSTRUCTIONS

Add trisodium phosphate to water and mix until dissolved. Add sodium metasilicate pentahydrate and mix until dissolved. Slowly add sodium hydroxide and mix well. Add Tomadol 900 surfactant and mix until dissolved. Add phosphate ester and mix well.

All-Purpose » Degreasers

Hard Surface Cleaners Degreaser for Hard Water COMPONENT Water

Tomadol 91-6 surfactant* Tomadol 91-2.5 surfactant* Tomamine Amphoteric 400 surfactant Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis)

Formula D-200 WT % 59.7

MIXING INSTRUCTIONS Add Tomadol 91-6 and Tomadol 91-2.5 surfactant to water, and mix until dissolved.

5.0 5.0 7.5 12.0 10.8

Add Tomamine Amphoteric 400 surfactant and mix until dissolved. Add sodium metasilicate, pentahydrate and ethylenediamine tetraacetic acid, tetrasodium salt and mix well until homogeneous. Add dye and fragrance as desired.

*The combination of Tomadol 91-6 and Tomadol 91-2.5 surfactants can be replaced with Tomadol 1-5 surfactant. pH 13.4 Phase coalescence temperature, °F >140 APPLICATIONS USE DILUTION Hard surface cleaning in hard water. Heavy-duty use: 32:1 Regular-duty use: 64:1

Degreaser Concentrate for High Pressure Spray COMPONENT Water

Tomadol 1-5 surfactant Tomamine Alkali Surfactant Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt (100% basis) pH Phase coalescence temperature, °F APPLICATIONS High-pressure spray system cleaner.



6.0 6.5 3.0 3.0

Add Tomamine Alkali Surfactant and mix well. Add sodium metasilicate, pentahydrate and mix until dissolved. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix with vigorous stirring until homogeneous. Add dye and fragrance as desired.

12.9 140 USE DILUTION Heavy-duty use: 32:1 Regular-duty use: 64:1

General Purpose Degreaser COMPONENT

Water Tomadol 91-6 surfactant Tomadol 91-2.5 surfactant Tomamine Alkali Surfactant Sodium metasilicate, pentahydrate Baypure CX 100* *Baypure CX 100, LANXESS Corporation. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS General purpose degreaser for heavy oil.

Formula D-202 WT %

MIXING INSTRUCTIONS

69.2 3.0 3.0 7.5 12.5 4.8

Add Tomadol 91-6 and Tomadol 91-2.5 surfactants to water and mix until dissolved. Add Tomamine Alkali Surfactant and mix well. Add sodium metasilicate, pentahydrate and mix well. Add tetrasodium iminodisuccinate and mix well.

13 13.2 165 USE DILUTION Heavy-duty use: 10:1 Regular-duty use: 32:1 Light-duty use: 64:1

5


Hard Surface Cleaners Heavy-Duty Degreaser COMPONENT

Formula NP-101 WT %

Soft water Sodium metasilicate pentahydrate Sodium nitrilo-triacetate (40%) Sodium hydroxide (50%) Tomamine AO-14-2 surfactant Tomamine Q-17-2 surfactant Tomadol 91-8 surfactant pH

81.5 2.0 1.0 9.5 1.5 1.5 3.0 >13

Specific gravity 20/20 °C

1.07

MIXING INSTRUCTIONS

Add sodium metasilicate pentahydrate to water and mix until dissolved. Add sodium nitrilo-triacetate (40%) and mix well. Add sodium hydroxide (50%) and mix well. Add Tomamine AO-14-2 surfactant and mix well. Add Tomamine Q-17-2 surfactant and mix well. Add Tomadol 91-8 surfactant and mix well until homogeneous.

APPLICATIONS

USE DILUTION

Hard surface cleaner.

5:1 to 30:1

NOTE: For extremely hard water, add 1%–2% ethylenediamine tetraacetic acid, tetrasodium salt (40%)

Low-VOC Concentrated Degreaser COMPONENT

Water Sodium metasilicate pentahydrate Sodium tripolyphosphate Tomadyne TM 106 surfactant Sodium hydroxide (50%) APPLICATIONS Hard surface degreaser.

Formula D-300 WT %

79.5 8.0 6.0 6.0 0.5

MIXING INSTRUCTIONS

Add sodium metasilicate pentahydrate and sodium tripolyphosphate and mix until dissolved. Add Tomadyne 106 surfactant and mix well. Slowly add sodium hydroxide and mix well. USE DILUTION As-is for heavy applications 10:1 to 64:1 for typical hard surface cleaning

Low-VOC Easy Rinse Degreaser Concentrate COMPONENT Water Sodium metasilicate pentahydrate

Sodium tripolyphosphate Tomadyne 106 surfactant Tomamine AO-455 surfactant APPLICATIONS Hard surface degreaser.

Formula D-301 WT % 88.0 3.0

1.0 6.0 2.0

MIXING INSTRUCTIONS Add sodium metasilicate pentahydrate to water and mix until dissolved.

Add sodium tripolyphosphate and mix until dissolved. Add Tomadyne 106 surfactant and mix well. Add Tomamine AO-455 surfactant and mix well.

Non-Phosphate Degreaser COMPONENT

Water Sodium metasilicate pentahydrate Sodium xylene sulfonate (40%) Tomadol 901 surfactant APPLICATIONS Hard surface degreaser.

Formula D-302 WT %

MIXING INSTRUCTIONS

85.0 5.0 4.0 6.0

Add sodium metasilicate pentahydrate to water and mix until dissolved. Add sodium xylene sulfonate and mix well. Add Tomadol 901 surfactant and mix until dissolved.

6


Hard Surface Cleaners Ready-to-Use Degreaser COMPONENT

Water Sodium metasilicate pentahydrate Potassium hydroxide (45%) Ethylene glycol monobutyl ether Tomadyne 100 surfactant APPLICATIONS Hard surface degreaser.

Formula D-303 WT %

MIXING INSTRUCTIONS

91.0 2.0 2.0 2.0 3.0

Add sodium metasilicate pentahydrate to water and mix until dissolved. Add potassium hydroxide and mix well. Add ethylene glycol monobutyl ether and mix well. Add Tomadyne 100 surfactant and mix well. USE DILUTION As-is

Solvent-Free Degreaser Concentrate COMPONENT Water

Sodium metasilicate pentahydrate Citric acid Tomamine AO-14-2 surfactant Tomadol 901 surfactant Sodium xylene sulfonate (40%) APPLICATIONS Hard surface degreaser.



12.0 2.5 6.5 7.5 4.0

Add citric acid and mix well. Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix well. Add sodium xylene sulfonate (40%) and mix well.

Thickened Water Rinsable Degreaser COMPONENT

Formula S-105 WT %

MIXING INSTRUCTIONS

Mineral spirits 75.0 Add Tomamine Q-14-2 surfactant to mineral spirits and mix well. Tomamine Q-14-2 surfactant 2.0 Add Tomadol 91-8 surfactant and mix well. Tomadol 91-8 surfactant 6.0 Add Tomamine E-17-2 surfactant and mix well. Tomamine E-17-2 surfactant 7.0 Add and mix soft water slowly until homogeneous. Soft water 10.0 Specific gravity, 20/20 °C 0.83 pH 8.6 APPLICATIONS Viscous cleaner for better cling. Hard surface cleaner for heavy greases. Paint and varnish stripper.

7

All-Purpose » Solvent Cleaners

Hard Surface Cleaners d-Limonene Cleaner COMPONENT d-Limonene Sodium lauryl ether sulfate (60%)*

Tomadol 25-3 surfactant Tomadol 25-7 surfactant Fatty acid diethanolamide** *Calfoam ES-603, Pilot Chemical Company, or equivalent product. **Calamide® C, Pilot Chemical Company, or equivalent product. Viscosity @ 73° F, cps Phase coalescence temperature, °F APPLICATIONS Hard surface cleaner.

Formula S-204 WT % 50.0 24.0

10.0 6.0 10.0

MIXING INSTRUCTIONS Add sodium lauryl ether sulfate to d-limonene and mix well.

Add Tomadol 25-3 and Tomadol 25-7 surfactants and mix until dissolved. Add fatty acid diethanolamide and and mix well until homogeneous.

15 >165 USE DILUTION Heavy-duty use: 16:1 Regular-duty use: 32:1 Light-duty use: 64:1

Blooming d-Limonene Microemulsion

Formula S-300

COMPONENT Tomamine E-14-5 surfactant

WT % 15.7

Tomamine E-17-5 surfactant Tomamine Alkali Surfactant d-Limonene Water APPLICATIONS Hard surface cleaner.

7.9 2.3 30 44.1

MIXING INSTRUCTIONS Blend Tomamine E-14-5 and Tomamine E-17-5 surfactants with Tomamine Alkali Surfactant.

Add d-limonene and mix well until homogeneous. Slowly add water while agitating until homogeneous. USE DILUTION 6:1 to 32:1

Clear Diluting d-Limonene Microemulsion COMPONENT Tomamine E-14-5 surfactant Tomamine E-17-5 surfactant

Tomamine Alkali Surfactant d-Limonene Water APPLICATIONS Hard surface cleaner.

Formula S-301 WT % 24.0 12.1

MIXING INSTRUCTIONS Blend Tomamine E-14-5 and Tomamine E-17-5 surfactants and Tomamine Alkali Surfactant and mix well until homogeneous.

Add d-limonene and mix well until homogeneous. Slowly add water while agitating.

3.6 30.0 30.3


8


Hard Surface Cleaners Dipentene Microemulsions

Formula S-120 A

COMPONENT

B

C

WT % WT % WT %

Dipentene 122 Tomamine E-14-5 surfactant Tomamine E-14-2 surfactant Tomamine Alkali Surfactant Water Low temperature cloud point, °C

5.0 6.4 0.8 0.8 87.0 11

10.0 8.8 1.1 1.1 79.0 11

20.0 14.4 1.8 1.8 62.0 19

High temperature cloud point, °C

38

50

41

Emulsifier/dipentene ratio

1.6

1.1

0.9

MIXING INSTRUCTIONS

Add Tomamine E-14-5 surfactant to dipentene 122 and mix until dissolved. Add Tomamine E-14-2 surfactant and Tomamine Alkali Surfactant, and mix well. Add and mix water slowly until homogeneous.

APPLICATIONS Solvent cleaner.

NOTE: Formulations should stay clear in the range between the cloud point temperatures given. Outside of that temperature range, they will haze and may separate. They will become clear and homogeneous again when returned to the temperature range of clarity.

Graffiti Remover COMPONENT Soft water


Potassium hydroxide (45%) Sodium gluconate Tomamine Alkali Surfactant Isopropanol, acetone or methanol Dipropylene glycol methyl ether

50.0 2.0 10.0 5.0 5.0

pH Specific gravity 20/20 °C APPLICATIONS Effective on most paints and inks.

>13 1.22

MIXING INSTRUCTIONS Add potassium hydroxide to water and mix well.

Add sodium gluconate and mix well. Add Tomamine Alkali Surfactant and mix well. Add isopropanol or alternate solvent and mix well. Add dipropylene glycol methyl ether and mix well until homogeneous.


Kerosene Emulsion Cleaner COMPONENT Kerosene

Tomamine E-14-2 surfactant Tomamine Q-14-2 surfactant Tomadol 91-8 surfactant Soft water Specific gravity 20/20 °C pH APPLICATIONS Hard surface degreaser.


MIXING INSTRUCTIONS Add Tomamine E-14-2 surfactant to kerosene and mix well.

14.0 3.0 3.0 45.0 0.92 9.3

Add Tomamine Q-14-2 surfactant and mix well. Add Tomadol 91-8 surfactant and mix well. Add water very slowly and mix well.

9


Hard Surface Cleaners Pine Oil Cleaner—Premium COMPONENT Pine oil Tomadol 91-8 or Tomadol 900 surfactant

C12 LAS (60%)* Isopropyl alcohol Triethanolamine Water *Calsoft L-60 Slurr y, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Hard surface cleaner. NOTE: Cloudy on mixing with water.

Formula S-200 WT % 20.0 4.7

8.0 11.0 4.7 51.6

C12 LAS (60%)* Isopropyl alcohol Triethanolamine Water *Calsoft L-60 Slurr y, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Hard surface cleaner. NOTE: Cloudy on mixing with water.

Formula S-201 WT % 10.0 4.7

8.0 8.0 2.0 67.3

Tomadol 25-3 surfactant SHELLSOLTM OMS* or mineral spirits Water *SHELLSOL OMS, Shell Chemical Co mpany, or equivalent product. Viscosity @ 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Hard surface degreaser.

MIXING INSTRUCTIONS Add Tomadol 91-8 or Tomadol 900 surfactant to pine oil and mix until dissolved. Add linear alkylbenzene sulfonic acid and mix well. Add isopropyl alcohol and mix well. Add triethanolamine and mix well. Slowly add water and mix well until homogeneous. Add dye and fragrance as desired.

15 10.3 >158

Solvent Degreaser, Flush-Off Type—Premium COMPONENT Tomadol 91-8 surfactant Tomadol 91-2.5 surfactant

Add linear alkylbenzene sulfonic acid and mix well. Add isopropyl alcohol and mix well. Add triethanolamine and mix well. Slowly add water and mix well until homogeneous. Add dye and fragrance as desired.

16 10.7 >158

Pine Oil Cleaner—Standard COMPONENT Pine oil Tomadol 91-8 or Tomadol 900 surfactant

MIXING INSTRUCTIONS Add Tomadol 91-8 or Tomadol 900 surfactant to pine oil and mix until dissolved.

Formula S-202 WT % 10.0 5.0

5.0 79.0 1.0 6 >176

10

MIXING INSTRUCTIONS Blend together Tomadol 91-8, Tomadol 91-2.5 and Tomadol 25-3 surfactants.

Add SHELLSOL OMS or mineral spirits and mix well until homogeneous. Add water and mix vigorously until homogeneous.


Hard Surface Cleaners Solvent Degreaser, Flush-Off Type—Standard COMPONENT Tomadol 91-6 surfactant Tomadol 91-2.5 surfactant

SHELLSOL OMS* or mineral spirits Ethylene glycol monobutyl ether Water *SHELLSOL OMS, Shell Chemical C ompany, or equivalent product. Viscosity @ 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Hard surface degreaser.

Formula S-203 WT % 15.0 5.0

60.0 18.0 2.0 8 >176

11

MIXING INSTRUCTIONS Blend together Tomadol 91-6 and Tomadol 91-2.5 surfactants. Add SHELLSOL OMS or mineral spirits and mix well.

Add ethylene glycol monobutyl ether and mix well until homogeneous. Add water and mix vigorously until homogeneous.

Hard Surface Cleaners

All-Purpose » Ready-to-Use and Spray-and-Wipe

All-Purpose Spray-and-Wipe COMPONENT Water Sodium tripolyphosphate

Formula R-200 WT % 87.5 2.0

Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt Tomadol 91-6 or Tomadol 900 surfactant Tomamine Alkali Surfactant Ethylene glycol monobutyl ether

2.0 0.5 3.0 2.0 3.0

Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Spray-and-wipe hard surface cleaner.

5 13 142

MIXING INSTRUCTIONS Add sodium tripolyphosphate and sodium metasilicate, pentahydrate to water and mix until dissolved. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add Tomadol 91-8 or Tomadol 900 surfactant and Tomamine Alkali Surfactant, and mix well until homogeneous. Add ethylene glycol monobutyl ether and mix well. Add dye and fragrance as desired.

Biodegradable and Solvent-Free Hard Surface Cleaner COMPONENT Water

Sodium citrate Sodium carbonate Tomadol 900 surfactant pH APPLICATIONS Hard surface cleaner.

WT % 92.50

2.25 3.25 2.00 12.0

Formula R-300 MIXING INSTRUCTIONS Add sodium citrate to water and mix until dissolved.

Add sodium carbonate and mix until dissolved. Add Tomadol 900 surfactant and mix well.

USE DILUTION As-is

Biodegradable and Solvent-Free Multi-Surface Spray-and-Wipe COMPONENT Water Sodium citrate

Sodium carbonate Tomadol 900 surfactant pH APPLICATIONS Hard surface cleaner.

WT % 98.0 0.5

0.7 0.8 11.5

MIXING INSTRUCTIONS Add sodium citrate to water and mix until dissolved.

Add sodium carbonate and mix until dissolved. Add Tomadol 900 surfactant and mix well.

USE DILUTION As-is

Light-Duty Neutral Cleaner COMPONENT Water

Formula R-301

Formula I-110 WT % 95.0

Tomamine AO-14-2 surfactant Tomamine Q-17-2 surfactant Tomadol 91-8 surfactant

1.0 1.0 3.0

Specific gravity 20/20 °F pH APPLICATIONS Wall, floor and tile wash. Good on light hydrocarbon and food soils.

1.0 7.6

MIXING INSTRUCTIONS Add Tomamine AO-14-2 surfactant to water and mix well.

Add Tomamine Q-17-2 surfactant and mix well. Add Tomadol 91-8 surfactant and mix well.

USE DILUTION As-is to 10:1

12


All-Purpose » Ready-to-Use and Spray-and-Wipe

Leather, Vinyl and Plastic Cleaner COMPONENT Water Tomadol 91-6 or Tomadol 900 surfactant

Formula R-201 WT % 80.5 10.0

Ethylene glycol monobutyl ether Amyl acetate Isopropyl alcohol

6.0 1.0 2.5

Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Leather, vinyl and plastic cleaner.

8 5.2 119

MIXING INSTRUCTIONS Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix until dissolved.

Add ethylene glycol monobutyl ether and mix well. Add amyl acetate and isopropyl alcohol, mix well until homogeneous.

Ready-to-Use Hard Surface Cleaner COMPONENT Water Sodium metasilicate pentahydrate

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Ethylene glycol monobutyl ether Tomadyne 100 surfactant APPLICATIONS Hard surface cleaner.

Formula R-302 WT % 97.0 0.5

1.0 0.5 1.0


Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well. Add ethylene glycol monobutyl ether and mix well. Add Tomadyne 100 surfactant and mix well. USE DILUTION As-is

Ready-to-Use Multi-Surface Cleaner COMPONENT Water Baypure CX 100*

Glycolic acid Tomadol 901 surfactant Dipropylene glycol n-butyl ether *Baypure CX 100, LANXESS Corporation. APPLICATIONS Hard surface clea ner.

Formula R-303 WT % 92.4 3.0

0.6 1.0 3.0

MIXING INSTRUCTIONS Add Baypure CX 100 to water and mix well. Add glycolic acid and mix well. Add Tomadol 901 surfactant and mix well. Add dipropylene glycol n-butyl ether and mix well.

Soy-Based All-Purpose Cleaner COMPONENT Water

Sodium citrate Tomadol 900 surfactant SoyGold® 1000* *SoyGold 1000 is a trademark of Ag Environmental Products, LLC APPLICATIONS Hard surface cleaner.

Formula R-304 WT % 96.0

0.5 3.0 0.5

MIXING INSTRUCTIONS Add sodium citrate to water and mix well. Add Tomadol 900 surfactant and mix well. Add SoyGold 1000 and mix well.

USE DILUTION As-is

13

Industrial » Dairy Cleaners

Hard Surface Cleaners Dairy Farm Acid Cleaner

Formula F-200

COMPONENT Water

WT % 36.7

Tomadol 25-3 surfactant Tomadol 25-12 surfactant Ethylene glycol monobutyl ether Phosphoric acid (85%) pH Phase coalescence temperature, °F APPLICATIONS Dairy equipment cleaner.

1.0 2.0 3.0 57.3 1.0 >165

Tetrapotassium pyrophosphate Kasil® 6 potassium silicate* Sodium hydroxide (50%) Tomamine Amphoteric 400 surfactant Ethylene glycol monobutyl ether Tomadol 23-6.5 surfactant *Kasil 6 potassium silicate, PQ Corporation. APPLICATIONS Dairy equipment cle aner.

Formula F-300 WT % 73.5

7.0 3.0 3.5 3.0 5.0 5.0

Foaming Acidic Dairy Cleaner COMPONENT Water

Monosodium phosphate Phosphoric acid (85%) Tomamine Amphoteric SC surfactant or Tomamine Alkali Surfactant APPLICATIONS Dairy equipment cl eaner.

Add ethylene glycol monobutyl ether and mix well. Add phosphoric acid (85%) and and mix well until homogeneous.

USE DILUTION 0.25–2.00 ounces/gallon

Dairy Alkaline Cleaner COMPONENT Water

MIXING INSTRUCTIONS Add Tomadol 25-3 and Tomadol 25-12 surfactants to water and mix until dissolved.

MIXING INSTRUCTIONS Add tetrapotassium pyrophosphate to water and mix until dissolved.

Add Kasil 6 potassium silicate and mix until dissolved. Add sodium hydroxide and mix well. Add Tomamine Amphoteric 400 surfactant and mix well. Add ethylene glycol monobutyl ether and mix well. Add Tomadol 23-6.5 surfactant and mix well.


14.0 42.0 5.0

14

MIXING INSTRUCTIONS Add monosodium phosphate to water and mix well.

Slowly add phosphoric acid, mix well and cool. Add Tomamine Amphoteric SC surfactant or Tomamine Alkali Surfactant and mix well.

Industrial » Food and Beverage Cleaners

Hard Surface Cleaners Bottle Wash

Formula F-201

COMPONENT Water Tomadol 25-12 surfactant

WT % 70.5 1.0

Sodium gluconate Sodium hydroxide (50%) Phosphate ester* Phosphonic acid**

2.0 18.0 8.0 0.5

*Triton H-66, The Dow Chemical Company, or equivalent product. **Dequest® 2010, Thermphos International BV, or equivalent product. pH Phase coalescence temperature, °F APPLICATIONS Food and beverage bottle wash.

MIXING INSTRUCTIONS Add Tomadol 25-12 surfactant to water and mix until dissolved.

Add sodium gluconate and and mix well. Add sodium hydroxide (50%) and mix well. Add phosphate ester* and mix well. Add phosphonic acid** and mix well until homogeneous. Add dye and fragrance as desired.

12.9 >165

General Food Industry Cleaner

Formula F-202

COMPONENT Water

WT % 78.8

Tomadol 23-6.5 surfactant C12 LAS (60%)* Sodium metasilicate, pentahydrate Tetrapotassium pyrophosphate Tomamine Alkali Surfactant Ethylene glycol monobutyl ether *Calsoft L-60 Slurr y, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Hard surface cleaner.

5.0 5.0 3.0 2.0 1.2 5.0

MIXING INSTRUCTIONS Add Tomadol 23-6.5 surfactant to water and mix until dissolved. Add linear sodium alkylbenzene sulfonate, sodium metasilicate, pentahydrate and tetrapotassium pyrophosphate and mix until dissolved. Add Tomamine Alkali Surfactant and mix well. Add ethylene glycol monobutyl ether and mix well until homogeneous. Add dye and fragrance as desired.

4 13.1 >165 USE DILUTION 1–2 ounces/gallon

Food Service Degreasers

Formula S-116 A

COMPONENT Water Ethylenediamine tetraacetic acid, tetrasodium salt (40%)

Sodium orthosilicate DowanolTM PM* Dowanol DPM* Diethylene glycol butyl ether Tomadol 25-3 surfactant Tomadol 25-7 surfactant Tomamine Alkali Surfactant *The Dow Chemical Company, or equivalent product. pH APPLICATIONS Food service hard surface cleaner and degreasers.

B

WT % WT % 71.5 66.5 6.0 6.0

5.0 6.0 4.0 – 1.0 3.0 3.5

5.0 – – 10.0 1.0 3.0 8.5

>13

>13

MIXING INSTRUCTIONS Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix until dissolved.

Add sodium orthosilicate and mix well. Add Dowanol PM and Dowanol DPM or diethylene glycol butyl ether and mix well. Add Tomadol 25-3 and Tomadol 25-7 surfactant and mix until dissolved. Add Tomamine Alkali Surfactant and mix well until homogeneous.

USE DILUTION 2 ounces/gallon

15


Hard Surface Cleaners High-Foaming Smokehouse Cleaner

Formula I-116 A

COMPONENT Soft water

B

WT % WT % 60.7 60.4

Sodium hydroxide (50%) Tomamine AO-728 surfactant Tomamine Amphoteric N surfactant Tomamine Amphoteric SC surfactant Tomadol 91-8 surfactant

30.0 3.0 – 5.3 1.0

30.0 3.0 5.6 – 1.0

pH Specific gravity 20/20 °F APPLICATIONS Food plant cleaning. Good emulsification and foam.

14.0 1.17

14.0 1.17

MIXING INSTRUCTIONS Add sodium hydroxide to water and mix well.

Add Tomamine AO-728 surfactant and mix well. Add Tomamine Amphoteric N or Tomamine Amphoteric SC surfactant and mix until dissolved. Add Tomadol 91-8 surfactant and mix until dissolved.


Oven Cleaner—Premium COMPONENT Water


VAN GEL® ES* 1.11 ® VANZAN xanthan gum** 0.22 Acusol™ 820*** 1.00 Tetrapotassium pyrophosphate 1.50 Sodium metasilicate anhydrous 4.00 Sodium gluconate 0.50 Potassium hydroxide (45%) 20.00 Tomamine Alkali Surfactant 0.50 Tomamine Q-17-2 surfactant 0.50 Tomamine AO-14-2 surfactant 0.50 *Use VAN GEL ES, R.T. Vanderbilt Company, Inc., or equivalent product. **Use VANZAN xanthan gum, R.T. Vanderbilt Company, Inc., or equivalent product. ***Acusol 820, Rohm and Haas, or equivalent product. APPLICATIONS Oven cleaner.

MIXING INSTRUCTIONS Add VAN GEL ES to water and mix well. Add VANZAN xanthan gum and mix well. Add Acusol 820 and mix well. Add tetrapotassium pyrophosphate and mix well. Add sodium metasilicate anhydrous and mix well. Add sodium gluconate and mix well. Add potassium hydroxide and mix well. Add Tomamine Alkali Surfactant and mix well. Add Tomamine Q-17-2 surfactant and mix well. Add Tomamine AO-14-2 surfactant and mix well.

Oven Cleaner—Standard COMPONENT Water

Sodium hydroxide (50%) Tomamine Alkali Surfactant Tomamine Q-17-2 surfactant APPLICATIONS Oven cleaner.


24.0 1.0 1.0

16

MIXING INSTRUCTIONS Slowly add sodium hydroxide, mix and cool. Add Tomamine Alkali Surfactant and mix well. Add Tomamine Q-17-2 surfactant and mix well.


Hard Surface Cleaners Meat Processing Cleaner COMPONENT Water Sodium metasilicate pentahydrate

Formula F-304 WT % 60.0 5.0

Sodium hydroxide (50%) 25.0 Tomamine AO-728 surfactant 3.0 Tomamine Amphoteric 400 surfactant 5.0 Tomamine Q-17-2 surfactant 2.0 APPLICATIONS Removal of meat tissue and protein soils from equipment and surfaces.


Slowly add sodium hydroxide, mix well and cool. Add Tomamine AO-728 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well. Add Tomamine Q-17-2 surfactant and mix well.

Solvent-Free Food Industry Degreaser COMPONENT Water

Sodium metasilicate pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt (100% Basis) Tomadol 900 surfactant Tomadol 600 surfactant Sodium xylene sulfonate (40%) APPLICATIONS Hard surface degreaser.


7.0 6.0 7.0 3.0 9.0


Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add Tomadol 900 and Tomadol 600 surfactants and mix well. Add sodium xylene sulfonate and mix well. USE DILUTION Heavy-duty use: As-is to 4:1 Regular-duty and floors: 20:1 Light-duty use: 64:1

17

Industrial » Low-Foam Cleaners

Hard Surface Cleaners High Pressure Wash

Formula LF-111 A

COMPONENT Water

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Sodium metasilicate, pentahydrate Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant Specific gravity, 20/20 °F pH APPLICATIONS Tunnel and spray wash systems.

B

WT % WT % 82.4 83.5

6.0 4.0 6.0 – 1.6 1.04 12.8

6.0 4.0 – 6.0 0.5 1.04 12.8


Add sodium metasilicate, pentahydrate and mix until dissolved. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well.

USE DILUTION 10 ounces/gallon

Low-Foam Concentrate

Formula LF-115 A

COMPONENT Water Potassium hydroxide (45%)

Tetrapotassium pyrophosphate Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Pressure washing and foam-sensitive applications.

B

WT % WT % 55.5 54.0 20.0 20.0

15.0 15.0 5.0 – – 5.0 4.5 6.0 14.0 14.0 1.23 1.24


Add tetrapotassium pyrophosphate and mix well. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well until homogeneous.

USE DILUTION 1–10 ounces/gallon

Low-Foam Spray Cleaner

Formula LF-107 A

COMPONENT Water

Potassium hydroxide (45%) Sodium gluconate Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Spray and other foam-sensitive applications.

B

WT % WT % 79.5 79.6

12.0 5.0 2.0 – 1.5 14 1.07

12.0 5.0 – 2.0 1.4 14 1.08

18


Add sodium gluconate and mix well. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well until homogeneous.

Industrial » Metal Cleaners

Hard Surface Cleaners Acid-Based Metal Cleaner COMPONENT Water Phosphoric acid (85%)

Glycolic acid Tomamine Alkali Surfactant pH Specific gravity @ 20 °C APPLICATIONS Metal cleaner. NOTE: Rinse well after wash. Neutralize if necessary.

Formula I-101 WT % 61.0 35.0

1.0 3.0 0.9 1.19

MIXING INSTRUCTIONS Add phosphoric acid to water, allow to cool.

Add glycolic acid, allow to cool. Add Tomamine Alkali Surfactant and mix well.


Alkaline Metal Cleaner—Premium Concentrate COMPONENT Water

Tomadol 91-6 or Tomadol 900 surfactant Sodium metasilicate, pentahydrate Trisodium phosphate, anhydrous Sodium hydroxide (50%) Ethylenediamine tetraacetic acid, tetrasodium salt Phosphate ester* *Triton H-66, The Dow Chemical Company, or equivalent product. pH Viscosity @ 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Metal cleaner.

Formula M-200 WT % 67.0

10.0 7.0 2.0 3.0 6.0 5.0

MIXING INSTRUCTIONS Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well. Add sodium metasilicate, pentahydrate, trisodium phosphate, anhydrous, sodium hydroxide, ethylenediamine tetraacetic acid, tetrasodium salt and phosphate ester. Continue with vigorous mixing until homogeneous.

12.7 28 99 USE DILUTION 1–2 ounces/gallon

Alkaline Metal Cleaner—Standard Concentrate COMPONENT Water

Tomadol 91-6 or Tomadol 900 Surfactant Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt Phosphate ester* *Triton H-66, The Dow Chemical Company, or equivalent product. pH Viscosity @ 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Metal cleaner.


MIXING INSTRUCTIONS Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well.

7.5 15.6 1.0 8.0

Add sodium metasilicate, pentahydrate, ethylenediamine tetraacetic acid, tetrasodium salt and phosphate ester. Continue with vigorous mixing until homogeneous.

13.2 12 135 USE DILUTION 1–2 ounces/gallon

19


Hard Surface Cleaners Heavy Oil Metal Cleaner

Formula M-202

COMPONENT Water Sodium metasilicate, pentahydrate

WT % 69.0 7.0

Ethylenediamine tetraacetic acid, tetrasodium salt Tomadol 91-6 surfactant Tomadol 91-2.5 surfactant Tomamine Amphoteric 400 surfactant pH Viscosity @ 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Metal cleaner. NOTE: Dye may be added if desired.

6.0 3.0 7.0 8.0 13.5 77 >165

MIXING INSTRUCTIONS Mix in two parts first then combine together. Part 1: Blend water, sodium metasilicate, pentahydrate and ethylenediamine tetraacetic acid, tetrasodium salt. Part 2: Blend Tomadol 91-6, Tomadol 91-2.5 and Tomamine Amphoteric 400.

Low-Foam Metal Cleaner

Formula LF-114 A

COMPONENT Water

Tetrapotassium pyrophosphate Potassium hydroxide (45%) Potassium silicate Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Metal cleaning where foam buildup is not desired.

B

WT % WT % 66.2 65.3

6.0 12.0 12.0 2.0 – 1.8 13.7 1.15

6.0 12.0 12.0 – 2.0 2.7 13.7 1.15

Tomamine AO-405 surfactant Tomamine Amphoteric 400 surfactant Tomamine E-14-5 surfactant APPLICATIONS Metal cleaner.

Add potassium hydroxide and mix well. Add potassium silicate and mix well. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well.


Low-Foam Easy Rinse Metal Cleaner COMPONENT Water Ethylenediamine tetraacetic acid, tetrasodium salt

MIXING INSTRUCTIONS Dissolve tetrapotassium pyrophosphate to the water and mix well.

Formula M-300 WT % 93.5 1.0

2.0 2.0 1.5

20

MIXING INSTRUCTIONS Add ethylenediamine tetraacetic acid, tetrasodium salt to water and mix well.

Add Tomamine AO-405 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well. Add Tomamine E-14-5 surfactant and mix well.


Hard Surface Cleaners Flash-Foaming Metal Cleaner COMPONENT Water

Sodium hydroxide (50%) Sodium silicate 3.22/1 Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Tomamine AO-455 surfactant Tomamine Q-14-2PG surfactant Tomamine Amphoteric 400 surfactant APPLICATIONS Hard surface cleaner.


10.0 5.0 5.0 4.5 0.5 1.0

MIXING INSTRUCTIONS Slowly add sodium hydroxide to water, mix well and cool.

Add sodium silicate 3.22/1 and mix until dissolved. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add Tomamine AO-455, Tomamine Q-14-2PG and Tomamine Amphoteric 400 surfactants and and mix well until homogeneous. USE DILUTION 20:1

Low-Residue Metal Cleaner COMPONENT Water

Sodium tripolyphosphate Tomadol 901 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric SC surfactant APPLICATIONS Metal cleaner.


0.5 5.0 1.5 2.0

MIXING INSTRUCTIONS Add sodium tripolyphosphate to water and mix well. Add Tomadol 901 surfactant and mix well. Add Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric SC surfactant and mix well.

Metal Parts Degreaser COMPONENT Water Sodium metasilicate

Tetrapotassium pyrophosphate Ethylene glycol monobutyl ether Tomamine Amphoteric SC surfactant Tomadyne 102 surfactant APPLICATIONS Metal cleaner.

Formula M-303 WT % 69.0 3.0

4.0 10.0 9.0 5.0

MIXING INSTRUCTIONS Add sodium metasilicate and mix until dissolved.

Add tetrapotassium pyrophosphate and mix until dissolved. Add ethylene glycol monobutyl ether and mix well. Add Tomamine Amphoteric SC surfactant and mix well. Add Tomadyne 102 surfactant and mix well.

Spray Cleaner for De-Oiling COMPONENT Water

Sodium silicate*, (37.5%) Tetrapotassium pyrophosphate Potassium hydroxide (45%) Tomadol 1-5 surfactant Tomamine Alkali Surfactant *Starso® Silicate 1:1.8, PQ Corporation, or equivalent. pH Viscosity, 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Metal cleaning.


12.0 13.0 12.0 2.0 4.5

MIXING INSTRUCTIONS Mix in two parts first then combine together.

Part 1: Blend water, sodium silicate, tetrapotassium pyrophosphate, and potassium hydroxide. Part 2: Tomadol 1-5 and Tomamine Alkali Surfactant.

13.7 3 >165 USE DILUTIONS Heavy-duty use: 4 ounces/gallon Regular-duty use: 2 ounces/gallon Light-duty use: 1 ounce/gallon

21


Hard Surface Cleaners Acid Aluminum Brightener—Premium

Formula A-102, A-103 A-102 A-103

COMPONENT Water

WT % WT % 64.0 70.0

Tomamine Acid Foamer surfactant Sulfuric acid (95%)

3.0 20.0

3.0 10.0

Ammonium bifluoride

13.0

–

–

17.0

Hydrofluoric acid (70%)

MIXING INSTRUCTIONS Tomamine Acid Foamer surfactant is a semisolid at room temperature. Heating may be necessar y.

Add Tomamine Acid Foamer surfactant to water and stir until dissolved. This may take several minutes and it may be necessary to leave standing overnight to ensure that it has been completely dissolved. Add sulfuric acid, mix well, then cool. Add ammonium bifluoride or hydrofluoric acid and mix well.

pH 3.5 3.5 APPLICATIONS USE DILUTION Truckwash, vertical aluminum surface cleaning. 10:1 to 30:1 NOTES: Preparation and use of a stock solution of 20% glycol ether/80% Tomamine Acid Foamer surfactant will aid i n solubilization and homogeneity.

Acid Aluminum Brightener—Standard

Formula M-204


WT % 78.0 4.5

Phosphoric acid (85%) Citric acid Ethylene glycol monobutyl ether Phosphonic acid* *Dequest 2010, Thermphos International BV, or equivalent product. pH Viscosity @ 73 °F, cps Phase coalescence temperature, °F APPLICATIONS Aluminum cleaner and brightener.

4.5 5.5 5.5 2.0

MIXING INSTRUCTIONS Dissolve acids in water, mix well and allow to cool.

Add ethylene glycol monobutyl ether and Tomadol 91-8 surfactant. Stir until clear solution is obtained.

1.7 5 >176

Non-Acid Aluminum Brightener

Formula I-113 A

COMPONENT Water

B

WT % WT % 58.0 58.0

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) NTA (40%) sodium nitrilo-triacetate Potassium hydroxide (45%) Sodium hydroxide (50%) Tomadol 91-8 surfactant Tomamine Alkali Surfactant

– 10.0 4.0 20.0 2.0 6.0

10.0 – 4.0 20.0 2.0 6.0

pH Specific gravity 20/20 °F APPLICATIONS Truckwash, parts wash. NOTE: Rinse well immediately after wash.

13.8 1.19

13.8 1.19

MIXING INSTRUCTIONS Dissolve ethylenediamine tetraacetic acid, tetrasodium salt or NTA in water.

Add potassium hydroxide to mixture, dissolve and allow to cool. Add sodium hydroxide to mixture, dissolve and allow to cool. Add Tomadol 91-8 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well.


22


Hard Surface Cleaners Solvent-Based Aluminum Brightener

Formula S-113 A

COMPONENT Water Phosphoric acid (85%)

B

C

WT % WT % WT % 83.0 80.5 82.5 3.0 – –

Hydroxyacetic acid (70%) – 10.0 5.0 Citric acid, anhydrous 4.0 – 3.5 Ethylene glycol butyl ether 5.0 5.0 5.0 Tomadol 91-8 surfactant 3.0 2.5 2.0 Tomamine Q-17-2 surfactant 2.0 2.0 2.0 pH 1.3 1.6 1.7 Specific gravity, 20/20 °C 1.03 1.02 1.02 APPLICATIONS Spray cleaner for trucks and equipment. Soak tank for equipment and parts.

MIXING INSTRUCTIONS Slowly add liquid acids to water and mix well.

Dissolve citric acid and mix well. Add ethylene glycol butyl ether and mix well, until clear Add Tomadol 91-8 surfactant and mix well, until clear. Add Tomamine Q-17-2 surfactant and mix well, until clear.


Alkaline Aluminum Cleaner—Premium COMPONENT Water

Sodium gluconate Ethylenediamine tetraacetic acid, tetrasodium salt (39%) Potassium hydroxide (45%) 42° Sodium silicate 3.22/1 Tomadol 900 surfactant Tomamine Alkali Surfactant pH Specific gravity, 20/20 °C APPLICATIONS Parts soak.


2.0 2.0 20.0 20.0 3.0 5.0 13.5 1.18

Add potassium hydroxide and mix well. Add sodium silicate and mix well. Add Tomadol 900 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well.


Alkaline Aluminum Cleaner—Standard COMPONENT Water

MIXING INSTRUCTIONS Add sodium gluconate and ethylenediamine tetraacetic acid, tetrasodium salt to water and mix well.


Tomadol 91-6 or Tomadol 900 surfactant 3.0 C12 LAS (60%)* 3.3 Sodium metasilicate, pentahydrate 7.0 Tetrapotassium pyrophosphate 2.0 Phosphate ester** 7.0 *Calsoft L-60 Slurry, Pilot Chemical Company, or equivalent product. **Triton H-66, The Dow Chemical Company, or equivalent. Viscosity @ 73 °F, cps 8 pH 13.3 Phase coalescence temperature, °F >176 APPLICATIONS Aluminum cleaner.

23

MIXING INSTRUCTIONS Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well. Add linear dodecylbenzene sulfonate, sodium metasilicate, pentahydrate, and tetrapotassium pyrophosphate and vigorously mix until homogeneous. Add phosphate ester and mix well.


Industrial » Miscellaneous Industrial Cleaners

Liquid Drain Opener COMPONENT Water Sodium hydroxide (50%)

Tomamine Alkali Surfactant pH APPLICATIONS Removes organic drain clogs.

Formula I-106 WT % 49.0 50.0

MIXING INSTRUCTIONS Add sodium hydroxide to water, mix and cool. Add Tomamine Alkali Surfactant and mix well.

1.0 14 USE DILUTION As-is

Industrial Floor Stripper COMPONENT Soft water


Sodium metasilicate, pentahydrate Ethylenediamine tetraacetic acid, tetrasodium salt (40%)

5.00 2.00

Tomamine Alkali Surfactant Tomadol 91-8 surfactant Monethanolamine

1.25 2.00 5.00

Tomamine Q-17-2 surfactant pH Specific gravity 20/20 °F APPLICATIONS Floor stripper and cleaner.

0.50 13.4 1.04

Ethylene glycol butyl ether Lauryl ether sulfate, sodium salt (60%) Sodium hydroxide (50%) Tomamine Alkali Surfactant pH Specific gravity 20/20 °C APPLICATIONS Paint remover for wood and metal surfaces.

Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add Tomamine Alkali Surfactant and mix well. Add Tomadol 91-8 surfactant and mix well. Add monethanolamine and mix well. Add Tomamine Q-17-2 surfactant and mix well.


Paint Stripper COMPONENT Soft water

MIXING INSTRUCTIONS Add sodium metasilicate, pentahydrate to water and mix until dissolved.


10.0 3.0 15.0 5.5 >13 1.08

MIXING INSTRUCTIONS Add ethylene glycol butyl ether to water and mix well.

Add lauryl ether sulfate, sodium salt and mix until dissolved. Add sodium hydroxide and mix well. Add Tomamine Alkali Surfactant and mix well until homogeneous.

USE INSTRUCTIONS Paint on with brush and remove with putty knife or steel wool.

24

Industrial » Miscellaneous Industrial Cleaners

Hard Surface Cleaners Thickened Alkaline Cleaners

Formula I-121 A

COMPONENT Water

B

C

WT % WT % WT % 91 86 81

Sodium hydroxide (50%) Tomamine AO-728 surfactant Oleic acid Tomamine Amphoteric N surfactant Typical viscosity @ 20 °C, cps (RVT #3, 100 rpm)

5 3 0.5 0.5 270

10 3 0.5 0.5 310

15 3 0.5 0.5 337

Typical viscosity @ 20 °C, cps (RVT #3, 10 rpm)

1410

1900

2160

Typical viscosity @ 20 °C, cps (RVT #3, 1 rpm)

5900

8900

9400

Specific gravity 20/20 °C 1.03 1.05 APPLICATIONS Spray applications to trucks and equipment. Soak tank application for equipment and parts.

1.08

MIXING INSTRUCTIONS Add sodium hydroxide (50%) to water and mix well.

Add Tomamine AO-728 surfactant and mix until dissolved. Add oleic acid and mix well. Add Tomamine Amphoteric N surfactant and mix well.


Industrial » Rust Removers

Hard Surface Cleaners Acid Rust Remover

Formula M-206

COMPONENT Water

WT % 79.5

MIXING INSTRUCTIONS Add Tomadol 91-6 or Tomadol 900 surfactant to water and mix well.

Tomadol 91-6 or Tomadol 900 surfactant Phosphoric acid (85%) Ethylene glycol monobutyl ether Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Rust remover.

2.5 14.0 4.0 5 1.0 >150

Add phosphoric acid and mix well. Add ethylene glycol monobutyl ether and mix well until homogeneous.

USE DILUTION May be diluted or used as-is on NONFERROUS metals (e.g., aluminum, zinc) at temperatures below 165 °F in stainless steel tanks.

25

Industrial » Steam Cleaners

Hard Surface Cleaners Built Steam Cleaner COMPONENT Water


MIXING INSTRUCTIONS Add sodium tripolyphosphate to water and mix well to dissolve.

Sodium tripolyphosphate Sodium metasilicate pentahydrate Tomadol 91-8 surfactant Tomamine Alkali Surfactant

10.0 2.0 5.0 5.0

Add sodium metasilicate pentahydrate and mix well to dissolve. Add Tomadol 91-8 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well until clear.

pH Specific gravity 20/20 °F APPLICATIONS Industrial degreasing and cleaning.

10.4 1.1 USE DILUTION 1 ounce/gallon

Heavy-Duty Steam Cleaner COMPONENT Water


MIXING INSTRUCTIONS Add sodium metasilicate pentahydrate to water and mix well.

Sodium metasilicate pentahydrate 30.0 Add potassium hydroxide and mix well until clear. Potassium hydroxide (45%) 10.0 Add Tomamine Alkali Surfactant and mix well. Tomamine Alkali Surfactant 15.0 pH 14 APPLICATIONS USE DILUTION Industrial cleaning and degreasing. 20:1 to 50:1 NOTE: Long-term storage should be in plastic containers, as the formulation will etch glass.

Non-Caustic Steam Cleaner COMPONENT Water

Sodium metasilicate pentahydrate Sodium tripolyphosphate Tomadol 91-8 surfactant Tomamine Alkali Surfactant pH Specific gravity 20/20 °F APPLICATIONS Hard surface cleaning and degreasing.


1.0 10.0 5.0 5.0 10.4 1.1

MIXING INSTRUCTIONS Add sodium metasilicate pentahydrate to water and mix well to dissolve.

Add sodium tripolyphosphate and mix well to dissolve. Add Tomadol 91-8 surfactant and mix well. Add Tomamine Alkali Surfactant and mix well.


26

Institutional » Acid Cleaners

Hard Surface Cleaners Thickened Acetic Acid Cleaners

Formula A-113 A

COMPONENT Water

Glacial acetic acid Tomamine Acid Thickener surfactant Tomadol 91-2.5 surfactant Sodium chloride Typical viscosity @ 20 °C (RVT #3, 100 rpm), cps Typical viscosity @ 20 °C (RVT #3, 10 rpm), cps Specific gravity 20/20 °C APPLICATIONS Toilet bowl cleaning. Vertical surface cleaning.

B

WT % WT % 85.0 87.5

5.0 3.0 – 7.0

5.0 3.0 0.5 4.0

500 700 1.35

200 200 1.36

MIXING INSTRUCTIONS Heat and mix Tomamine Acid Thickener surfactant prior to use in order to assure homogeneity.

Add glacial acetic acid to water and mix well. Add Tomamine Acid Thickener and mix well. Add Tomadol 91-2.5 surfactant and mix well. Slowly add sodium chloride, mix well and cool.


Thickened Formic Acid Cleaner COMPONENT Water

Formic acid (96%) Tomamine Acid Thickener surfactant Tomadol 91-2.5 surfactant Sodium chloride Typical viscosity @ 20 °C (RVT #3, 10 rpm), cps Specific gravity 20/20 °C APPLICATIONS Vertical surface cleaning.

Formula A-110 WT % 88.4

5.0 3.0 0.6 3.0


Slowly add formic acid to water and mix well. Add Tomamine Acid Thickener surfactant and mix well. Add Tomadol 91-2.5 surfactant and mix well. Slowly add sodium chloride, mix well and cool.

350 1.03 USE DILUTION As-is

Viscous Hydrochloric/Phosphoric Acid Cleaner COMPONENT Water

Formula A-106 WT % 70.0

Phosphoric acid (75%) Tomamine Acid Thickener surfactant Hydrochloric acid (37%)

2.0 3.0 25.0

Viscosity @ 20 °C, cps APPLICATIONS Toilet bowl cleaning. Vertical surface cleaning.

5200


Slowly add phosphoric acid to water, mix well and cool. Add Tomamine Acid Thickener surfactant and mix well. Slowly add hydrochloric acid, mix well and cool. USE DILUTION As-is to 10:1

27


Hard Surface Cleaners Viscous Organic Acid Cleaners

Formula A-104 A

COMPONENT Water

B

C

WT % WT % WT % 88.00 88.00 88.00

Citric acid, anhydrous

2.50

1.25

–

Tomamine Acid Thickener surfactant

3.00

3.00

3.00

–

1.25

2.50

Tomadol 91-6 surfactant or Tomadol 1-7 surfactant

0.30

0.30

0.30

Sodium chloride

6.00

6.00

6.00

Fragrance*

0.20

0.20

0.20

780

560

Formic acid

*Use fragrance suitable for acidic media, and test for stability. Viscosity @ 20 °C, cps 820 APPLICATIONS Toilet bowl cleaners with good cling time.


Add citric acid to water and mix until dissolved. Add Tomamine Acid Thickener surfactant and mix well. Slowly add formic acid and mix well. Add Tomadol 91-6 or Tomadol 1-7 surfactant and mix well. Add sodium chloride and mix until dissolved. Add fragrance and mix well.

Thickened Oxalic Acid Cleaner

Formula A-115 A

COMPONENT

B

WT % WT %

Water Oxalic acid Tomamine Acid Thickener surfactant Tomadol 91-2.5 surfactant Sodium xylene sulfonate (40%)

90.0 5.0 3.0 – 2.0

90.0 5.0 3.0 0.5 1.5

Typical viscosity @ 20 °C (RVT #3, 100 rpm), cps

650

2000

Typical viscosity @ 20 °C (RVT #3, 10 rpm), cps

5000

2750

1.02

1.02

Specific gravity 20/20 °C

APPLICATIONS Toilet bowl cleaning. Metal cleaning. Vertical surface cleaning. Rust removal.

MIXING INSTRUCTIONS

Heat and mix Tomamine Acid Thickener prior to use in order to assure homogeneity. Add oxalic acid to water and mix well. Add Tomamine Acid Thickener surfactant and mix well. Add Tomadol 91-2.5 surfactant and mix well. Slowly add sodium xylene sulfonate mix well and cool.


Concentrated Phosphoric Acid Cleaners

Formula A-111 A

COMPONENT Soft water

Phosphoric acid (85%) Tomamine Acid Thickener surfactant Sodium chloride Typical viscosity @ 20 °C (RVT #3, 10 rpm), cps Specific gravity 20/20 °C

B

WT % WT % 33.5 36.0

50.0

50.0

7.5 9.0

5.0 9.0


Slowly add phosphoric acid to water, mix and cool. Add Tomamine Acid Thickener surfactant and mix well. Slowly add sodium chloride, mix well and cool.

28000 13000 1.35

1.36

APPLICATIONS Toilet bowl cleaning. Vertical surface cleaning.


28


Hard Surface Cleaners Viscous Phosphoric Acid Cleaner

Formula A-105

COMPONENT Water

WT % 77.7

Phosphoric acid (75%) Tomamine Acid Thickener surfactant Sodium chloride Tomadol 91-6 surfactant Fragrance*

12.7 4.0 5.0 0.5 0.1

*Use fragrance suitable for acidic media, and test for stability. Viscosity @ 20 °C, cps Specific gravity 20/20 °C APPLICATIONS Good cleaning and descaling. Good cling time.

MIXING INSTRUCTIONS Heat and mix Tomamine Acid Thickener surfactant prior to use in order to assure homogeneity. Slowly add phosphoric acid (75%) to water, mix well and cool. Add Tomamine Acid Thickener surfactant and mix until dissolved. Add sodium chloride and mix until dissolved. Add Tomadol 91-6 surfactant and mix well until homogeneous. Add fragrance and mix well.

6500 1.09 USE DILUTION 5:1 to 10:1

Viscous Sulfamic Acid Cleaners

Formula A-112 A

COMPONENT Water

Sulfamic acid Tomamine Acid Thickener surfactant Tomadol 91-2.5 surfactant Sodium chloride Typical viscosity @ 20 °C (RVT #3, 100 rpm), cps Typical viscosity @ 20 °C (RVT #3, 10 rpm), cps Specific gravity 20/20 °C APPLICATIONS Toilet bowl cleaning. Vertical surface cleaning.

B

WT % WT % 87.0 88.0

5.0 3.0 – 5.0

5.0 3.0 0.5 3.5

650 5000 1.06

685 960 1.04


Add sulfamic acid and mix well. Add Tomamine Acid Thickener surfactant and mix well. Add Tomadol 91-2.5 surfactant and mix well. Slowly add sodium chloride, mix well and cool.


29

Institutional » Bathroom Cleaners

Hard Surface Cleaners Mixed Acid Bath Cleaner

Formula B-102

COMPONENT Water Hydroxyacetic acid

WT % 80.0 5.0

Sulfamic acid Tomamine AO-728 surfactant pH APPLICATIONS Tub and tile cleaner and descaler.

5.0 10.0 1

MIXING INSTRUCTIONS Add hydroxyacetic acid to water and mix well.

Add sulfamic acid and mix well. Add Tomamine AO-728 surfactant and mix well.

USE DILUTION As-is, or dilute to need

Bath and Tile Cleaner

Formula I-300

COMPONENT Water Phosphoric acid (85%)

WT % 77.0 13.0

Tomadol 901 surfactant Tomamine AO-728 surfactant APPLICATIONS Tub and tile cleaner.

7.0 3.0

MIXING INSTRUCTIONS Slowly add phosphoric acid to water, mix and allow to cool.

Add Tomadol 901 surfactant and mix well. Add Tomamine AO-728 surfactant and mix well.

Citric Acid Bowl Cleaner

Formula A-114 A

COMPONENT Water

B

WT % WT % 88.0 89.0

Citric acid, anhydrous

5.0

5.0

Tomamine Acid Thickener surfactant Tomadol 91-2.5 surfactant Sodium chloride

3.0 0.5 3.5

3.0 1.0 2.0

690 960 1.05

400 410 1.03

Typical viscosity @ 20 °C (RVT #3, 100 rpm), cps Typical viscosity @ 20 °C (RVT #3, 10 rpm), cps Specific gravity 20/20 °C APPLICATIONS Toilet bowl cleaning. Vertical surface cleaning.


Add citric acid to water and mix well. Add Tomamine Acid Thickener surfactant and mix well. Add Tomadol 91-2.5 surfactant and mix well. Slowly add sodium chloride and mix well.


Hydrochloric Acid Bowl Cleaner COMPONENT Water Tomamine Acid Thickener surfactant

Formula A-109 WT % 72.0 3.0

Hydrochloric acid (37%)

25.0

Viscosity @ 20 °C, cps pH APPLICATIONS Toilet bowl cleaning. Vertical surface cleaning.

5100 1.3


Add Tomamine Acid Thickener surfactant to water and mix well. Slowly add hydrochloric acid, mix well and cool.


30

Institutional » Bathroom Cleaners

Hard Surface Cleaners Hydrochloric/Phosphoric Acid Bowl Cleaner

Formula B-101

COMPONENT Water

WT % 68.00

Phosphoric acid (75%) Tomadol 25-12 surfactant Tomamine Acid Thickener surfactant Hydrochloric acid (37%)

3.00 0.50 4.00 24.50

Viscosity @ 20 °C, cps pH APPLICATIONS Bowl cleaner. Ceramic tub and tile cleaner.

1750 <3

MIXING INSTRUCTIONS Heat and mix Tomamine Acid Thickener surfactant prior to use in order to assure homogeneity. Slowly add phosphoric acid to water and mix well. Add Tomadol 25-12 surfactant and mix well. Add Tomamine Acid Thickener surfactant and mix well. Slowly add hydrochloric acid and mix well.

USE DILUTION As-is, or dilute to need

Mixed Acid Bowl Cleaner COMPONENT Water

Citric acid Phosphoric acid (85%) Tomadol 901 surfactant APPLICATIONS Tub and tile cleaner and descaler.


6.0 3.0 4.5

MIXING INSTRUCTIONS Add citric acid to water and mix well. Add phosphoric acid and mix well. Add Tomadol 901 surfactant and mix well.

Phosphoric Acid Bowl Cleaner COMPONENT Water

Phosphoric acid (75%) Tomamine Acid Thickener surfactant Sodium chloride Tomadol 25-12 surfactant Fragrance* * Use fragrance suitable for acidic media, and test for stability. Viscosity @ 20 °C, cps pH APPLICATIONS Bowl cleaner. Tile cleaner.

Formula B-100 WT % 77.7

12.7 4.0 5.0 0.5 0.1


Slowly add phosphoric acid to water and mix well. Add Tomamine Acid Thickener surfactant and mix until dissolved. Add sodium chloride and mix until dissolved. Add Tomadol 25-12 surfactant and mix well. Add fragrance and mix well.

1800 1.3 USE DILUTION As-is

31

Institutional » Dishwash

Hard Surface Cleaners Auto Dish Detergent with Anti-Scale COMPONENT Water Citric acid

Tomamine AO-455 surfactant Isopropanol APPLICATIONS Auto dishwash detergent.

Formula I-302 WT % 82.5 6.0

2.5 9.0

MIXING INSTRUCTIONS Add citric acid to water and mix well.

Add Tomamine AO-455 surfactant and mix well. Add isopropanol and mix well.

Auto Dish Rinse Aid for Poor Water Quality COMPONENT Water

Sodium xylene sulfonate (40%) NonidetTM RK-18 or Nonidet SF-3 surfactant APPLICATIONS Auto dishwash rinse aid.


15.0 25.0

MIXING INSTRUCTIONS Add sodium xylene sulfonate to water and mix well.

Add Nonidet RK-18 or Nonidet SF-3 surfactant and mix well.

Auto Dish Rinse Aid with Tea Stain Remover COMPONENT Water

Nonidet SF-5 surfactant Tomamine Amphoteric 400 surfactant APPLICATIONS Auto dishwash rinse aid.


17.0 3.0

MIXING INSTRUCTIONS Add Nonidet SF-5 surfactant and mix well.

Add Tomamine Amphoteric 400 surfactant and mix well.

Hand Dishwash—Premium COMPONENT Soft water


Dodecylbenzene sulfonic acid, sodium salt (60%) Lauryl ether sulfate, sodium salt (60%) Tomamine AO-728 surfactant Tomamine Amphoteric SC surfactant Tomadol 91-8 surfactant Citric acid

3.0 29.0 2.0 4.0 1.0 q.s.

Typical viscosity @ 20 °C (RVT #3, 100 rpm), cps Specific gravity 20/20 °C APPLICATIONS Degreasing hand dishwash.

40 1.02

MIXING INSTRUCTIONS Add dodecylbenzene sulfonic acid, sodium salt to water and mix well.

Add lauryl ether sulfate, sodium salt and mix well. Add Tomamine AO-728 surfactant and mix well. Add Tomamine Amphoteric SC surfactant and mix well. Add Tomadol 91-8 surfactant and mix well. Add citric acid to adjust to pH 7.0. Add dye and fragrance as desired.

USE DILUTION 1 ounce/gallon

32

Institutional » Dishwash

Hard Surface Cleaners Hand Dishwash—Standard COMPONENT Water

C12 LAS (60%)* Ethanol Tomadol 91-8 or Tomadol 900 surfactant Sodium lauryl ether sulfate (60%)** Fatty acid diethanolamide***


26.9 3.0 4.8 8.0 3.2

MIXING INSTRUCTIONS Best results will be obtained if water temperature is 100–120 °F. Add linear sodium alkylbenzene sulfonate to water and mix well. Add preservatives as desired and mix well. Add ethanol and mix well. Add Tomadol 91-8 or Tomadol 900 and mix until dissolved. Add sodium lauryl ether sulfate and mix well. Add fatty acid diethanolamide and mix well. Add dye and fragrance as desired.

*Calsoft L-60 Slurry, Pilot Chemical Company, or equivalent product. **Calfoam ES-603, Pilot Chemical Company, or equivalent product. ***Calamide C, Pilot Chemical Co mpnay, or equivalent. Viscosity @ 73 °F, cps 67 pH 8.6 Phase coalescence temperature, °F >176 Clear point, °F 32 APPLICATIONS Hand dishwash.

Hand Dishwash—Economy COMPONENT Soft water Dodecylbenzene sulfonic acid, sodium salt (90%)

Lauryl ether sulfate, sodium salt (60%) Citric acid Sodium xylene sulfonate (40%) Ethanol Tomamine AO-728 surfactant pH APPLICATIONS High-foaming hand dishwash.

Formula D-104 WT % 64.0 16.0

8.0 1.0 3.0 5.0 3.0

MIXING INSTRUCTIONS Add dodecylbenzene sulfonic acid, sodium salt to water and mix until dissolved.

Add lauryl ether sulfate, sodium salt and mix well. Add citric acid and mix well. Add sodium xylene sulfonate and mix well. Add ethanol and mix well. Add Tomamine AO-728 surfactant and mix well. Add dye and fragrance as desired.

8 USE DILUTION 1 ounce/gallon

Pearlescent Hand Dishwash COMPONENT Soft water Dodecylbenzene sulfonic acid, sodium salt (60%)

Formula D-103 WT % 44.7 23.5

Lauryl ether sulfate, ammonia salt (60%) Opacifier* Pearlizer** Tomamine AO-728 surfactant Tomamine Amphoteric N surfactant

16.5 0.1 2.2 3.0 10.0

*Lytron 295 opacifier, Morton International, or equivalent product. **Euperlan PK-771 pearlizer, Henkel, or equivalent product. Viscosity @ 20 °C, cps pH APPLICATIONS High foaming, degreasing hand dishwash.

3200 7.9

MIXING INSTRUCTIONS Add dodecylbenzene sulfonic acid, sodium salt to water and mix until dissolved.

Add lauryl ether sulfate, ammonia salt and mix well. Add opacifier and pearlizer and mix well. Add Tomamine AO-728 surfactant and mix well. Add Tomamine Amphoteric N surfactant and mix well until homogeneous. Adjust viscosity as desired with ethanol.

USE DILUTION 1 ounce/gallon

33

Institutional » Floor Cleaners

Hard Surface Cleaners Concrete and Garage Floor Cleaner

Formula I-201

COMPONENT Water

WT % 66.8

Tomadol 91-6 surfactant Ethylene glycol monobutyl ether Sodium xylene sulfonate (40%) Alkyldiphenyloxide disulfonate* Trisodium phosphate, anhydrous Sodium metasilicate, pentahydrate Potassium hydroxide (45%)

5.0 6.5 10.0 4.4 1.3 3.0 3.0

*DowfaxTM 2A-1, The Dow Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Concrete and garage floor cleaner.

MIXING INSTRUCTIONS Add Tomadol 91-6 surfactant to water and mix until dissolved. Add ethylene glycol monobutyl ether and mix well. Add sodium xylene sulfonate and mix well. Add alkyldiphenyloxide disulfonate and mix well. Add trisodium phosphate and mix well. Add sodium metasilicate, pentahydrate and mix well. Add potassium hydroxide and mix well. Add dye and fragrance as desired.

6 13.3 >165

Concrete and Garage Floor Cleaner—Low Foam A

COMPONENT Water

Formula LF-112 B

WT % WT % 85.5 85.0

Tetrapotassium pyrophosphate 5.5 Trisodium phosphate 1.0 Sodium metasilicate pentahydrate 2.5 Dipropylene glycol methyl ether* 2.0 Tomamine AO-405 surfactant 2.0 Tomamine AO-455 surfactant – Tomamine Amphoteric 400 surfactant 1.5 *Dowanol DPM, The Dow Chemical Company, or equivalent product. pH 12.6 Specific gravity 20/20 °F 1.07 APPLICATIONS Spot use on concrete floors for difficult stains.

5.5 1.0 2.5 2.0 – 2.0 2.0

MIXING INSTRUCTIONS Add tetrapotassium pyrophosphate to water and mix until dissolved.

Add trisodium phosphate and mix until dissolved. Add sodium metasilicate pentahydrate and mix until dissolved. Add dipropylene glycol methyl ether and mix well. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix until dissolved. Add Tomamine Amphoteric 400 surfactant and mix well.

12.6 1.07 USE DILUTION As-is

Low-Foam Floor Cleaners

Formula LF-106 A

COMPONENT Water

Sodium metasilicate Tetrapotassium pyrophosphate Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Floor cleaners.

B

WT % WT % 77.3 77.1

5.0 14.0 2.0 – 1.7 13 1.16

5.0 14.0 – 2.0 1.9 13 1.16

MIXING INSTRUCTIONS Add sodium metasilicate to water and mix until dissolved.

Add tetrapotassium pyrophosphate and mix until dissolved. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well.


34


Hard Surface Cleaners Machine Floor Scrubber COMPONENT Water

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Sodium hydroxide (50%) Sodium metasilicate pentahydrate Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Institutional floor scrubbing.

Formula LF-110 A B WT % WT % 86.8 87.4

1.0 2.4 4.0 4.5 – 1.3 13.1 1.04

1.0 2.4 4.0 – 4.5 0.7 13.1 1.04


Slowly add sodium hydroxide, mix well and cool. Add sodium metasilicate pentahydrate and mix until dissolved. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well.


Wax Stripper and Cleaner

Formula LF-109 A

B

COMPONENT Water

WT % WT % 90.0 91.0

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Diethylene glycol monobutyl ether Tomamine AO-405 surfactant Tomamine Amphoteric 400 surfactant Tomamine AO-455 surfactant pH Specific gravity 20/20 °F APPLICATIONS Foor wax stripper and cleaner.

3.0 3.0 4.0 4.0 2.0 – 1.0 – – 2.0 12 12 1.015 1.020


Add diethylene glycol monobutyl ether and mix well. Add Tomamine AO-405 and Tomamine Amphoteric 400 surfactant or Tomamine AO-455 surfactant and mix well.

USE DILUTION 0.25–1 ounce/gallon

Wax Stripper—Premium COMPONENT Soft water Sodium metasilicate, pentahydrate

Formula I-107 WT % 84.25 5.00

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Tomamine Alkali Surfactant Tomadol 91-8 surfactant Monethanolamine

2.00 1.25 2.00 5.00

Tomamine Q-17-2 surfactant pH Specific gravity 20/20 °F APPLICATIONS Floor wax stripper.

0.50 13.4 1.04

MIXING INSTRUCTIONS Add sodium metasilicate, pentahydrate to water and mix until dissolved. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved. Add Tomamine Alkali Surfactant and mix well. Add Tomadol 91-8 surfactant and mix well. Add monethanolamine and mix well. Add Tomamine Q-17-2 surfactant and mix well.


35


Hard Surface Cleaners Wax Stripper—Standard

Formula I-202


WT % 75.0 10.0

Tetrapotassium pyrophosphate Monoethanolamine Oleic acid

5.0 5.0 5.0

Viscosity @ 73 °F, cps Phase coalescence temperature, °F pH APPLICATIONS Floor wax stripper.

MIXING INSTRUCTIONS Add Tomadol 91-6 surfactant to water and mix until dissolved. Add tetrapotassium pyrophosphate and mix until dissolved. Add monoethanolamine and mix well. Add oleic acid and mix well. Add dye and fragrance as desired.

142 142 11.6 USE DILUTION Heavy-duty use: 4 ounces/gallon Regular-duty use: 2 ounces/gallon

Wax Stripper—Low Foam

Formula LF-113 A

COMPONENT Water Potassium hydroxide (45%)

Trisodium phosphate Tetrapotassium pyrophosphate Monoethanolamine Isopropanol Ethylene glycol monobutyl ether Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Mechanical floor wax stripping.

B

WT % WT % 71.8 71.9 5.0 5.0

2.0 2.0 5.0 2.5 3.5 5.0 – 3.2 13.4 1.05

2.0 2.0 5.0 2.5 3.5 – 5.0 3.1 13.4 1.05

MIXING INSTRUCTIONS Slowly add potassium hydroxide to water, mix well and cool.

Add trisodium phosphate and mix until dissolved. Add tetrapotassium pyrophosphate and mix until dissolved. Add monoethanolamine and mix well. Add isopropanol and mix well. Add ethylene glycol monobutyl ether and mix well. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well.


36

Institutional » Glass Cleaners

Hard Surface Cleaners Acidic Glass Cleaner COMPONENT Water Monoethanolamine

Isopropanol Tomamine AO-14-2 surfactant Tomadol 901 surfactant Glacial acetic acid

Formula I-305 WT % 97.1 0.7

1.4 0.2 0.3 0.3

APPLICATIONS Glass cleaner.

MIXING INSTRUCTIONS Add monoethanolamine to water and mix well.

Add isopropanol and mix well. Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix until dissolved. Add glacial acetic acid and mix well. USE DILUTION As-is

Ammoniacal Glass Cleaner COMPONENT Water

Monoethanolamine Isopropanol Tomamine AO-14-2 surfactant Tomadol 901 surfactant Aqua ammonia (29%) APPLICATIONS Glass cleaner.


0.7 1.4 0.2 0.3 0.5


Add isopropanol and mix well. Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix well. Add aqua ammonia and mix well.

USE DILUTION As-is

Glass Cleaner without Ammonia COMPONENT Water

Monoethanolamine Isopropanol Tomamine AO-14-2 surfactant Tomadol 901 surfactant APPLICATIONS Glass Cleaner.


0.7 1.4 0.2 0.3


Add isopropanol and mix well. Add Tomamine AO-14-2 and Tomadol 901 surfactant and mix until dissolved. USE DILUTION As-is

Window Cleaner with Water Repellency COMPONENT Water Monoethanolamine

Isopropanol Tomamine AO-14-2 surfactant Tomadol 901 surfactant Tomadry TM DAB drying additive APPLICATIONS Glass cleaner.

Formula I-308 WT % 97.1 0.7

1.4 0.2 0.3 0.3


Add isopropanol and mix well. Add Tomamine AO-14-2 and Tomadol 901 surfactants and mix until dissolved. Add Tomadry DAB drying additive and mix well. USE DILUTION As-is

37


Institutional » Rug and Upholstery Cleaners

Carpet Antistat COMPONENT Tomamine Q-ST 50 surfactant

Isopropanol Hot water

pH OTHER FORMULATION NOTES Carpet antistat. Prevents dirt pickup while reducing static charge.


3.0 90.0

8.0 USE DILUTION 1 gallon/1000 ft 2

Carpet Prespotter COMPONENT Water Sodium bicarbonate

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Sodium xylene sulfonate (40%) Tomamine 25-7 surfactant Tomamine 25-3 surfactant APPLICATIONS Carpet prespotter.

Formula I-309 WT % 74.0 5.0

5.0 10.0 2.0 4.0

Carpet Steam Cleaner COMPONENT Water Tomadol 25-12 surfactant

Sodium metasilicate pentahydrate Sodium xylene sulfonate (40%) Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Liquid steam carpet cleaner.

MIXING INSTRUCTIONS Heat and mix Tomamine Q-ST 50 surfactant prior to use in order to assure homogeneity. Blend isopropanol into Tomamine Q-ST 50 surfactant until homogeneous. Slowly blend in water until homogeneous.

MIXING INSTRUCTIONS Add sodium bicarbonate to water and mix until dissolved.

Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well. Add sodium xylene sulfonate and mix well. Add Tomamine 25-7 surfactant and mix well. Add Tomamine 25-3 surfactant and mix well.

Formula I-203 WT % 82.0 4.0

8.0 6.0 4 11.9 >167

38


Add sodium metasilicate pentahydrate and mix well. Add sodium xylene sulfonate and mix well. Add dye and fragrance as desired.

Institutional » Rug and Upholstery Cleaners

Hard Surface Cleaners “Dry Brittle” Liquid Cleaner

Formula I-204


WT % 65.0 13.0

Sodium lauryl ether sulfate (3EO) (60%)* Tetrapotassium pyrophosphate**

9.0 7.0

MIXING INSTRUCTIONS Add Tomadol 25-12 surfactant to water and mix until dissolved. Add sodium lauryl ether sulfate (3EO) and mix well. Add tetrapotassium pyrophosphate and mix well. All phosphate ester and mix well. Add dye and fragrance as desired.

Phosphate ester*** 6.0 *Calfoam ES-603, Pilot Chemical Company, or equivalent product. **Substitute 1% sodium metasilicate for 1% of the tetrapotassium pyrophosphate if a more alkaline product is desired. ***TritonH-66, The Dow Chemical Company, or equivalent product. Viscosity @ 73 °F, cps 13 pH 9.6 Phase coalescence temperature, °F 150 APPLICATIONS Rug and upholstery cleaner.

Low-Foam Carpet Cleaner

Formula LF-108 A

COMPONENT Water

Sodium carbonate Tetrapotassium pyrophosphate Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Tomamine AO-405 surfactant Tomamine AO-455 surfactant Tomamine Amphoteric 400 surfactant pH Specific gravity 20/20 °F APPLICATIONS Carpet extraction. Steam cleaning.

B

WT % WT % 81.0 80.5

5.0 5.0 5.0 2.0 – 2.0 11 1.11

5.0 5.0 5.0 – 2.0 2.5 11 1.11

MIXING INSTRUCTIONS Add sodium carbonate to water and mix until dissolved.

Add tetrapotassium pyrophosphate and mix until dissolved. Add ethylenediamine tetraacetic acid, tetrasodium salt and mix well. Add Tomamine AO-405 or Tomamine AO-455 surfactant and mix well. Add Tomamine Amphoteric 400 surfactant and mix well.


Rug and Upholstery Shampoo COMPONENT Water



5.0

Sodium tripolyphosphate

2.0

Isopropyl alcohol

4.0

Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Rug and carpet cleaner.

MIXING INSTRUCTIONS Add Tomadol 25-12 surfactant to water and mix until dissolved. Add sodium tripolyphosphate and mix until dissolved. Add isopropyl alcohol and mix well. Add fluorescent whitening agent, dye and fragrance as desired.

4 8.8 >167 USE DILUTION For rugs and carpet: 10:1 For upholstery: 20:1

39

Institutional » Wall and Tile Cleaners

Hard Surface Cleaners Wall and Tile Concentrate COMPONENT Water


Sodium lauryl ether sulfate (60%)* Tomadol 91-6 or Tomadol 900 surfactant Fatty acid diethanolamide** Trisodium phosphate, anhydrous Sodium metasilicate pentahydrate Isopropyl alcohol

6.7 6.0 2.0 2.0 13.9 2.0

*Calfoam ES-603, Pilot Chemical Company, or equivalent product. **Calamide C, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Wall and tile cleaner.

14 13.2 140 USE DILUTION As-is to 8:1

Wall and Tile Spray Cleaner COMPONENT Water

Sodium lauryl ether sulfate (60%)* Tomadol 23-6.5 Fatty acid diethanolamide** Sodium metasilicate pentahydrate Trisodium phosphate, anhydrous Ethylene glycol monobutyl ether *Calfoam ES-603, Pilot Chemical Company, or equivalent product. **Calamide C, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F

MIXING INSTRUCTIONS Add sodium lauryl ether sulfate to water and mix until dissolved. Add Tomadol 91-6 or Tomadol 900 surfactant and mix well. Add fatty acid diethanolamide and mix well. Add trisodium phosphate and mix until dissolved. Add sodium metasilicate pentahydrate and mix until dissolved. Add isopropyl alcohol and mix well. Add dye and fragrance as desired.


0.8 1.7 0.5 1.7 1.0 3.5

2 10.0 165

APPLICATIONS Wall and tile cleaner.

40

MIXING INSTRUCTIONS Add sodium lauryl ether sulfate to water and mix until dissolved.

Add Tomadol 23-6.5 surfactant and mix well. Add fatty acid diethanolamide and mix well. Add sodium metasilicate pentahydrate and mix until dissolved. Add trisodium phosphate and mix until dissolved. Add ethylene glycol monobutyl ether and mix well. Add dye and fragrance as desired.

Liquid Detergents

Laundry – Commercial Highly Alkaline Built Liquid—Non-Phosphate COMPONENT Water Sodium metasilicate, andydrous

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Potassium hydroxide (45%) Dodecylbenzene sulfonic acid Tomamine Amphoteric LH surfactant Tomadol 900 surfactant Tomadol 600 surfactant APPLICATIONS Liquid laundry detergent.

Formula L-301 WT % 45.0 5.0

3.5 24.0 9.0 4.5 6.0 3.0

Highly Alkaline Built Liquid—with Phosphate COMPONENT Water

Tetrapotassium pyrophosphate Kasil 6 potassium silicate* Potassium hydroxide (45%) Dodecylbenzene sulfonic acid Tomamine Amphoteric 400 surfactant Tomadol L124 surfactant Tomadol L80 surfactant *Kasil 6 potassium silicate, PQ Corporation, or equivalent product. APPLICATIONS Liquid laundry detergent.

Formula L-302 WT % 55.0

3.0 4.0 18.0 6.0 4.0 8.2 1.8

Non-Caustic, Non-Phosphate Built Liquid COMPONENT Water Sodium metasilicate pentahydrate

MIXING INSTRUCTIONS Add sodium metasilicate, ethylenediamine tetraacetic acid, tetrasodium salt and potassium hydroxide to water, mix until dissolved and solution is clear. Slowly add dodecylbenzene sulfonic acid while blending. If temperature exceeds 140 °F, allow solution to cool before proceeding. Add Tomamine Amphoteric LH surfactant and mix well. Add Tomadol 900 surfactant and mix well. Add Tomadol 600 surfactant and mix well.

MIXING INSTRUCTIONS Add tetrapotassium pyrophosphate, Kasil 6 potassium silicate and potassium hydroxide to water, mix until dissolved and solution is clear.

Slowly add dodecylbenzene sulfonic aci d while blending. If temperature exceeds 140 °F, allow solution to cool before proceeding. Add Tomamine Amphoteric 400 surfactant and mix well. Add Tomadol L124 surfactant and mix well. Add Tomadol L80 surfactant and mix well.

Formula L-303 WT % 70.7 8.0


Add potassium carbonate and mix until dissolved. Potassium carbonate 8.0 Add Tomamine Amphoteric LH surfactant and mix well. Tomamine Amphoteric LH surfactant 3.0 Add Tomadol L124 surfactant and mix well. Tomadol L124 surfactant 7.0 Add Tomadol 600 surfactant and mix well. Tomadol 600 surfactant 1.5 Add Tomadol L80 surfactant and mix well. Tomadol L80 surfactant 1.5 Add Acusol 445N and mix well. Acusol 445N* 0.2 Add Tinopal CBS-X Fluorescent Whitening Agent and mix well. ® Tinopal CBS-X Fluorescent Whitening Agent** 0.1 *Acusol 445N, Rohm and Haas, or equivalent product. **Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Cor poration. APPLICATIONS Laundry detergent.

41

Liquid Detergents

Laundry – Commercial Two-Part Built Liquid for Low Temperature Institutional Laundry—Part A COMPONENT Water Tomadol 25-12 surfactant

Tomadol 25-7 surfactant Tomadol 600 surfactant Glycerine APPLICATIONS Low-temperature laundry detergent.

WT % 72.0 7.0

9.0 6.0 6.0

MIXING INSTRUCTIONS Add Tomadol 25-12 surfactant to water and mix until dissolved. Add Tomadol 25-7 surfactant and mix until dissolved. Add Tomadol 600 surfactant and mix well. Add glycerine and mix well.

Two-Part Built Liquid for Low Temperature Industrial Laundry—Part A COMPONENT Water

Tomadol L144 surfactant Tomadol L124 surfactant Tomadol 23-5 surfactant APPLICATIONS Low-temperature laundry detergent.

WT % 80.0

7.0 7.0 6.0

WT % 76.0 18.0

Tomadol 23-5 surfactant d-Limonene APPLICATIONS Laundry detergent.

2.0 4.0

WT % 47.0

Formula L-306

MIXING INSTRUCTIONS Add Tomadol L124 surfactant to water and well.

Add Tomadol 23-5 surfactant and mix well. Add d-limonene and mix well.

Two-Part Built Liquid with Solvent Base for Industrial Laundry—Part A COMPONENT Mineral spirits

Formula L-305

MIXING INSTRUCTIONS Add Tomadol L144 surfactant to water and well. Add Tomadol L124 surfactant and mix well. Add Tomadol 23-5 surfactant and mix well.

Two-Part Built Liquid for Healthcare and Hospitality Laundry—Part A COMPONENT Water Tomadol L124 surfactant

Formula L-304

Formula L-307

MIXING INSTRUCTIONS Add dodecylbenzene sulfonic acid to mineral spirits and mix well.

Dodecylbenzene sulfonic acid 23.0 Add Tomadol 25-7 surfactant and mix well. Tomadol 25-7 surfactant 12.0 Add Tomadol 91-6 surfactant and mix well. Tomadol 91-6 surfactant 12.0 Add Tomadol 91-2.5 surfactant and mix well. Tomadol 91-2.5 surfactant 6.0 APPLICATIONS Laundry detergent. NOTE: This detergent must be used with 50% more than the typical amount of Part B caustic builder. An extended suds bath at higher temperature (e.g., 160 °F) is recommended to provide optimal reaction time and washing conditions for this formula.

42

Liquid Detergents

Laundry – Commercial Two-Part Built Liquid Builder Solutions—Part B

Formula L-200

Blending Procedure: Blend separately from the selected nonionic surfactant Part A from Formula L-304 through L-307, and deliver separately to wash water in the Part A:B ratio of 1:2 PHOSPHATE/CAUSTIC COMPONENT WT % MIXING INSTRUCTIONS Water 43.3 Add sodium metasilicate pentahydrate to water and mix until dissolved. Sodium metasilicate pentahydrate 16.8 Add tetrapotassium pyrophosphate and mix until dissolved. Tetrapotassium pyrophosphate 9.5 Slowly add potassium hydroxide, mix well and cool. Potassium hydroxide (45%) 30.4 NON-PHOSPHATE/CAUSTIC COMPONENT WT % MIXING INSTRUCTIONS Water 52.5 Add sodium metasilicate pentahydrate to water and mix until dissolved. Sodium metasilicate pentahydrate 26.4 Slowly add potassium hydroxide, mix well and cool. Potassium hydroxide (45%) 13.5 Add potassium carbonate and mix well Potassium carbonate 7.6 APPLICATIONS Laundry detergent.

Light-Duty 2X Concentrated Liquid COMPONENT Water

Sodium citrate Sodium gluconate Baypure CX 100* Triethanolamine Tomadol L124 surfactant Tomadol 23-5 surfactant *Baypure CX 100, LANXESS Corporation. APPLICATIONS Laundry detergent.


2.0 2.0 4.0 4.0 4.0 6.0

Light-Duty 2X Concentrated Liquid with Bleach COMPONENT Water Sodium borate

Baypure CX 100* Triethanolamine Tomadol 25-12 surfactant Tomadol 25-7 surfactant Tomadol 23-5 surfactant Acusol 505N** Tinopal CBS-X Fluorescent Whitening Agent*** *Baypure CX 100, LANXESS Corporation. **Acusol 505N, Rohm and Haas. ***Tinopal is registered mark of Ciba Specialty Chemicals Corporation. APPLICATIONS Laundry detergent.

MIXING INSTRUCTIONS Add sodium citrate to water and mix until dissolved.

Add sodium gluconate and mix until dissolved. Add Baypure CX 100 and mix well. Add triethanolamine and mix well. Add Tomadol L124 surfactant and mix well. Add Tomadol 23-5 surfactant and mix well.

Formula L-309 WT % 77.6 2.0

5.0 5.0 3.5 3.5 3.0 0.2 0.2

43

MIXING INSTRUCTIONS Add sodium borate to water and mix until dissolved.

Add Baypure CX 100 and mix well. Add triethanolamine and mix well. Add Tomadol 25-12 surfactant and mix well. Add Tomadol 25-7 surfactant and mix well. Add Tomadol 23-5 surfactant and mix well. Add Acusol 505N and mix well. Add Tinopal CBS-X Fluorescent Whitening Agent and mix well.

Liquid Detergents

Laundry – Commercial Light-Duty Liquid for Low Temperature Laundry COMPONENT Water

Soda ash Sodium citrate Sodium gluconate Triethanolamine Sodium dodecylbenzene sulfonic acid (40%) Tomadol L144 surfactant Tomadol L80 surfactant APPLICATIONS Laundry detergent.


0.7 1.2 0.7 1.4 2.8 2.0 1.1

Blood Stain Remover COMPONENT Water

Ethylenediamine tetraacetic acid, tetrasodium salt (40%) Ammonium hydroxide (28%) Tomamine Amphoteric LH surfactant Isopropanol Ethylene glycol monobutyl ether APPLICATIONS Laundry detergent.


4.0 8.0 4.0 8.0 4.0

Prespotter COMPONENT Deionized water

MIXING INSTRUCTIONS Add soda ash to water and mix until dissolved. Add sodium citrate and mix until dissolved. Add sodium gluconate and mix well. Add triethanolamine and mix well. Add sodium dodecylbenzene sulfonic acid and mix well. Add Tomadol L144 surfactant and mix well. Add Tomadol L80 surfactant and mix well.

MIXING INSTRUCTIONS Add ethylenediamine tetraacetic acid, tetrasodium salt and mix until dissolved.

Add ammonium hydroxide and mix well. Add Tomamine Amphoteric LH surfactant and mix well. Add isopropanol and mix well. Add ethylene glycol monobutyl ether and mix well.



Tomadol 25-3 surfactant 9.0 Add Tomadol 25-7 surfactant and mix well. Tomadol 25-7 surfactant 1.0 Add sodium hydroxide and mix well. Sodium hydroxide (50%) 2.9 Add citric acid monohydrate and mix well. Citric acid monohydrate 2.4 ADd Carbopol 676 and mix well until homogeneous. ® Carbopol 676* 0.5 *Carbopol, Lubrizol Advanced Materials, Inc. APPLICATIONS Laundry detergent. NOTE: A thickener such as Carbopol 676 must be used to stabilize the formulation, as the formula produces a product that is not homogeneous.

44

Powders

Laundry – Commercial Industrial Built Powder

Formula L-313

COMPONENT Sodium carbonate Sodium metasilicate anhydrous

WT % 21.9 18.0

Sodium hydroxide (Bead) Sodium chloride Sodium tripolyphosphate Tetrapotassium pyrophosphate Tomadol 25-12 surfactant Tomadol 25-7 surfactant Tomadol 23-5 surfactant APPLICATIONS Laundry detergent.

28.0 20.0 3.0 4.0 1.8 1.8 1.5

MIXING INSTRUCTIONS Mix sodium carbonate, sodium metasilicate anhydrous, sodium hydroxide, sodium chloride, sodium tripolyphosphate and tetrapotassium pyrophosphate, and mix thoroughly.

Add Tomadol 25-12, Tomadol 25-7 and Tomadol 23-5 surfactants slowly while mixing. Continue mixing until homogeneous.

Light-Duty Powder COMPONENT Sodium carbonate


MIXING INSTRUCTIONS Mix sodium carbonate, Versene and sodium metasilicate thoroughly.

Versene™ powder* Sodium metasilicate anhydrous Tomadol 25-9 surfactant

4.0 6.0 1.5


7.0


1.5

Add Tomadol 25-9, Tomadol 25-7, Tomadol 1-5 and Tomadol 23-5 surfactants slowly while mixing. Add Acusol 445ND and Tinopal CBS-X Fluorescent Whitening Agent slowly while mixing. Continue mixing until homogeneous.


3.0

Acusol 445ND** Tinopal CBS-X Fluorescent Whitening Agent***

1.0 0.2

*Versene, The Dow Chemical Company. **Acusol 445ND, Rohm and Haas. ***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Cor poration. APPLICATIONS Laundry detergent.

45

Powders

Laundry – Commercial Light-Duty Powder with Bleach and Enzymes COMPONENT Sodium carbonate Sodium metasilicate anhydrous

Sodium citrate Tomadol L124 surfactant Tomadol 600 surfactant Tomadol L80 surfactant Acusol 445ND* Sodium percarbonate Tetraacetylethylenediamine Purafect® OX Enzyme** Tinopal CBS-X Fluorescent Whitening Agent***

Formula L-315 WT % 74.3 3.0

5.0 4.7 1.0 1.0 1.0 8.0 1.0 0.8 0.2

MIXING INSTRUCTIONS Mix sodium carbonate, sodium metasilicate anhydrous and sodium citrate thoroughly.

Add Tomadol L124, Tomadol 600 and Tomadol L80 surfactants slowly while mixing. Add Acusol 445ND, sodium percarbonate, tetraacetylethylenediamine, Purafect OX Enzyme and Tinopal CBS-X Fl uorescent Whitening Agent slowly while mixing. Continue mixing until homogeneous.

*Acusol 445ND, Rohm and Haas. **Purafect OX Enzyme. Danisco US Inc. – Genencor Division. ***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corpor ation. APPLICATIONS Laundry detergent.

Economy Powder for Low Temperature Laundry COMPONENT Sodium carbonate


MIXING INSTRUCTIONS Mix sodium carbonate, Versene and sodium metasilicate thoroughly.

Versene powder* 2.0 Add Tomadol L144 and Tomadol L80 surfactants slowly while mixing. Sodium metasilicate anhydrous 3.0 Add Tinopal CBS-X Fluorescent Whitening Agent slowly while mixing. Tomadol L144 surfactant 3.0 Continue mixing until homogeneous. Tomadol L80 surfactant 2.0 Tinopal CBS-X Fluorescent Whitening Agent** 0.1 *Versene, The Dow Chemical Company. **Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Corpor ation. APPLICATIONS Laundry detergent.

46

Powders

Laundry – Commercial Non-Phosphate Shirt Laundry COMPONENT Sodium carbonate Sodium metasilicate anhydrous

Formula L-317 WT % 47.8 19.0

MIXING INSTRUCTIONS Mix sodium carbonate, sodium metasilicate anhydrous, and ethylenediamine tetraacetic acid, tetrasodium salt thoroughly. Add Tomadol 25-9, Tomadol 25-7, Tomadol 1-5 and Tomadol 23-5 surfactants slowly while mixing. Add Acusol 445ND, sodium percarbonate, tetraacetylethylenediamine, Purafect OX Enzyme and Tinopal CBS-X Fluorescent Whitening Agent slowly while mixing. Continue mixing until homogeneous.

Ethylenediamine tetraacetic acid, tetrasodium salt, anhydrous 12.0 Tomadol 25-9 surfactant 1.0 Tomadol 25-7 surfactant 5.0 Tomadol 1-5 surfactant 1.0 Tomadol 23-5 surfactant 2.0 Acusol 445ND* 1.5 Sodium percarbonate 8.0 Tetraacetylethylenediamine 1.0 Purafect OX Enzyme** 1.4 Tinopal CBS-X Fluorescent Whitening Agent*** 0.3 *Acusol 445ND, Rohm and Haas. **Purafect OX Enzyme. Danisco US Inc. – Genencor Division. ***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Co rporation. APPLICATIONS Laundry detergent.

Premium Shirt Laundry COMPONENT Sodium carbonate Sodium tripolyphosphate

Formula L-318 WT % 52.1 6.0

MIXING INSTRUCTIONS Mix sodium carbonate, sodium tripolyphosphate and tetrapotassium phyrophosphate thoroughly.

Add Tomadol 25-9, Tomadol 25-7, Tomadol 1-5 and Tomadol 23-5 Tetrapotassium phyrophosphate 8.0 surfactants slowly while mixing. Tomadol 25-9 surfactant 1.0 Add sodium metasilicate, Acusol 445ND, sodium percarbonate, Tomadol 25-7 surfactant 4.0 tetraacetylethylenediamine, Purafect OX Enzyme and Tinopal CBS-X Tomadol 1-5 surfactant 1.0 Fluorescent Whitening Agent slowly while mixing. Tomadol 23-5 surfactant 2.0 Continue mixing until homogeneous. Sodium metasilicate anhydrous 15.0 Acusol 445ND* 0.5 Sodium percarbonate 8.0 Tetraacetylethylenediamine 1.0 Purafect OX Enzyme** 1.2 Tinopal CBS-X Fluorescent Whitening Agent*** 0.2 *Acusol 445ND, Rohm and Haas. **Purafect OX Enzyme. Danisco US Inc. – Genencor Division. ***Tinopal CBS-X Fluorescent Whitening Agent, Ciba Specialty Chemicals Cor poration. APPLICATIONS Laundry detergent.

47

Foam Markers

Miscellaneous Foam Marker Concentrate—High Viscosity COMPONENT Water Tomamine Amphoteric L surfactant

Alcohol sulfate (30%)* Fatty acid diethanolamide** Isopropyl alcohol Sodium lauryl ether sulfate (3EO) (60%)*** *Calfoam SLS-30, Pilot Chemical Company, or equivalent product. **Calamide C, Pilot Chemical Company, or equivalent product. ***Calfoam ES-603, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Foam marker.

Formula V-200 WT % 22.0 20.0

31.5 4.0 5.0 17.5

MIXING INSTRUCTIONS Add Tomamine Amphoteric L surfactant to water and mix well.

Add alcohol sulfate and mix well. Add fatty acid diethanolamide and mix well. Add isopropyl alcohol and mix well. Slowly add sodium lauryl ether sulfate (3EO) and mix well until homogeneous.


Foam Marker Concentrate—Low Viscosity COMPONENT Water

Tomamine Amphoteric L surfactant Fatty acid diethanolamide* Isopropyl alcohol Sodium lauryl ether sulfate (3EO) (60%)** *Calamide C, Pilot Chemical Company, or equivalent product. **Calfoam ES-603, Pilot Chemical Company, or equivalent product. Viscosity @ 73 °F, cps pH Phase coalescence temperature, °F APPLICATIONS Foam marker.

Formula V-201 WT % 42.5

MIXING INSTRUCTIONS Add Tomamine Amphoteric L surfactant to water and mix well.

15.0 4.0 5.0 33.5

Add fatty acid diethanolamide and mix well. Add isopropyl alcohol and mix well. Slowly add sodium lauryl ether sulfate (3EO) and mix well until homogeneous.


48

Clean-industrial-and-institutional-cleaning-formulary-brochure.pdf

Recommend Documents