Chapter 10 Inorg

138

Chapter 10 Coordination Chemistry II: Bonding

CHAPTER 10: COORDINATION CHEMISTRY II: BONDING 10.1

10.2

a.

Tetrahedral d 6, 4 unpaired electrons

b.

[Co(H2O)6]2+, high spin octahedral d 7, 3 unpaired electrons

c.

[Cr(H2O)6]3+, octahedral d 3, 3 unpaired electrons

d.

square planar d 7, 1 unpaired electron

e.

5.1 BM =  =

a.

[M(H2O)6]3+ with 1 unpaired electron.

b.

[MBr4]– with the maximum number of unpaired electrons (5).

n  n  2  ; n  4.2  4 M = Ti

d1:

M3+ with 5 d electrons: M = Fe c.

Diamagnetic [M(CN)6]3–. The strong field cyano ligand favors low spin. M3+ with 6 d electrons: M = Co

d.

[M(H2O)6]2+ having LFSE =   o . Both high spin d4 and d9 have the correct  o.

3 5

0.6 

High spin d4: M = Cr

0.6 

d9: M = Cu – 0.4 

10.3

a.

K3[M(CN)6] M is first row transition metal, 3 unpaired electrons. M3+ with 3 d electrons: M = Cr

Copyright © 2014 Pearson Education, Inc.

– 0.4 

Chapter 10 Coordination Chemistry II: Bonding b.

139

[M(H2O)6]3+ M is second row transition metal, LFSE = 2.4  o. This can be achieved with a low spin d6 configuration. M3+ with 6 d electrons: M = Rh 0.6 

– 0.4 

c.

[MCl4]– M is first row transition metal, 5 unpaired electrons. M3+ with 5 d electrons: Fe

d.

MCl2(NH3)2 M is third row d8 transition metal; two M–Cl stretching bands in IR. Second and third row d8 complexes are often square planar. The presence of two M–Cl stretching bands implies cis geometry of the chloro ligands. Cl

M with 8 d electrons: M = Pt 2+

NH3 Pt

Cl

NH3

10.4

Angular overlap calculations for d 8 and d 9 ions show no energy difference between D4h and Oh when exclusively considering  interactions. Both d 8 geometries have energies of -3e; both d 9 geometries have energies of -6e. In general, stability constants decrease as more ligands are added; the sequence for nickel is the common one. The huge drop in stability constant between the second and third ethylenediamine on Cu2+ is a result of the d 9 Jahn-Teller effect. The first two en ligands add in a square-planar geometry, with water molecules in the axial positions, and the coordination of these two mondentate ligands allows for the Jahn-Teller distortion. Adding a third en ligand requires a geometry change and with a preference for uniform M—N bond distances towards the six nitrogen atoms. This is counter to the Jahn-Teller distortion, and the third addition is much less favorable than the first two.

10.5

[M(H2O)6]2+ M is first row transition metal, µ = 3.9 BM. The magnetic moment implies 3 unpaired electrons, which would give rise to   3 3 5  = 3.9 BM. There are two possibilities, d3 and d7: M2+ , d3 : M = V

10.6

a. b.

[Cr(H2O)6]2+

M2+ , d7: M = Co

  4(6)  4.9  B 4–

[Cr(CN)6]

n=2

  2(4)  2.8  B –

c.

[FeCl4]

d.

[Fe(CN)6]3–

  1(3)  1.7  B

n=4 e.

[Ni(H2O)6]2+

f.

[Cu(en)2(H2O)2]2+ n = 1

n=5

  5(7)  5.9  B

n=1 Copyright © 2014 Pearson Education, Inc.

n=2

  2(4)  2.8  B   1(3)  1.7  B

140 10.7

Chapter 10 Coordination Chemistry II: Bonding Fe(H2O)4(CN)2 is really [Fe(H2O)6]2[Fe(CN)6], all containing Fe(II). [Fe(H2O)6]2+ is high spin d 6, with  = 4.9 µB; [Fe(CN)6]4– is low spin d 6 , with  = 0 µB. The average value is then 2 × 4.9/3 = 3.3 µB. 2.67 unpaired electrons gives   2.67  4.67  3.53 µB.

10.8

Co(II) is d 7. In tetrahedral complexes, it is generally high spin and has 3 unpaired electrons; in octahedral complexes, it is also typically high spin and also has 3 unpaired electrons; in square planar complexes, it has 1 unpaired electron. The magnetic moments can be calculated as

  n(n  2)  3.9, 3.9, and 1.7  B , respectively. 10.9

For the red compounds (Me and Et at high temperatures, Pr, pip, and pyr at all temperatures), the larger magnetic moment indicates approximately 5 unpaired electrons, appropriate for high-spin Fe(III) species. At low temperatures for the Me and Et compounds, the magnetic moment indicates 3 to 4 unpaired electrons, an average value indicating an equilibrium mixture of high and low spin species. The low spin octahedral complexes have 1 unpaired electron. Increasing the size of the R groups changes the structure enough that it is locked into high-spin species at all temperatures.

10.10

Both [M(H2O)6]2+ and [M(NH3)6]2+ should show the double-humped curve of Figure 10.12, with larger values for the NH3 compounds. Therefore, the difference between these curves shows the same general features as in Figure 10.12.

10.11

These can be verified using the approach introduced in Chapters 4 and 5, in which a character of +1 is counted for each operation that leaves a vector unchanged, a character of –1 for each operation that leaves a vector in its position, but with the direction reversed. The general transformation matrix for rotation is provided in Figure 4.16. Application is of this matrix is necessary to deduce the characters involving rotations.

10.12

The e column gives d orbital energies for complexes involving  donor ligands only; the Total column gives energies for complexes of ligands that act as both  donors and  acceptors: a.

ML2, using positions 1 and 6: z2 x2–y2 xy xz yz

b.

Total 2e 0 0 –2 eπ –2 eπ

ML3, using positions 2, 11, 12: z2 x2–y2 xy xz yz

eπ 0 0 0 –2 –2

e 2 0 0 0 0

e 0.75 1.125 1.125 0 0

eπ 0 –1.5 –1.5 –1.5 –1.5

Total 0.75e 1.125 e – 1.5 eπ 1.125 e – 1.5 eπ –1.5 eπ –1.5 eπ


Chapter 10 Coordination Chemistry II: Bonding c.

ML5, C4v, using positions 1, 2, 3, 4, 5: z x2–y2 xy xz yz

eπ 0 –1.5 –1.5 –3.5 –3.5

e 2.75 1.125 1.125 0 0

z x2–y2 xy xz yz

Total 2.75e 1.125 e – 1.5 eπ 1.125 e – 1.5 eπ –3.5 eπ –3.5 eπ

ML8, cube, positions 7, 8, 9, 10, doubled for the other four corners: e 0 0 2.67 2.67 2.67

2

z x2–y2 xy xz yz 10.13

Total 2e 3e –4eπ –3eπ –3eπ

ML5, D3h, using positions 1, 2, 6, 11, 12: 2

e.

eπ 0 0 –4 –3 –3

e 2 3 0 0 0

2

d.

141

eπ –5.33 –5.33 –1.78 –1.78 –1.78

Metal d orbitals, NH3 influence eπ Total e 2 1 0 z 1e 2 2 3 0 x –y 3e 0 0 0 xy 0 0 0 xz 0 0 0 yz

Metal d orbitals, Cl e 2 z2 2 2 0 x –y 0 xy 0 xz 0 yz

–

influence eπ Total 0 2e 0 0 0 0 2 2 eπ 2 2 eπ

–

Ligand NH3: 1 2 3 4 5 6

Total –5.33 eπ –5.33 eπ 2.67 e – 1.78 eπ 2.67 e – 1.78 eπ 2.67 e – 1.78 eπ

Ligand Cl : e 0 –1 –1 –1 –1 0

Total 0 –1e –1e –1e –1e 0

1 2 3 4 5 6

e –1 0 0 0 0 –1

eπ –2 0 0 0 0 –2

Total –1e – 2 eπ 0 0 0 0 –1e – 2 eπ

Overall energy = –8 e(NH3) – 4 e(Cl) – 8 eπ(Cl) + 4 eπ(Cl) = –8 e(NH3) – 4 e(Cl) – 4 eπ(Cl) The metal electrons are still unpaired, one in the dxy orbital and one each in the dxz and dyz, raised by π interaction with Cl–. Four of the ligand orbitals are lowered by e(NH3) and two are lowered


142

Chapter 10 Coordination Chemistry II: Bonding by e(Cl) + 2 eπ(Cl); each contains a pair of ligand electrons. The precise orbital energies cannot be calculated since the angular overlap parameters for NH3 and Cl towards Cr(III) are not provided. Table 10.13 does provide the necessary parameters for trans-[Cr(NH 3 )4 F2 ]+ .

10.14

a.

If we assume these ligands have similar donor abilities, the energies below are obtained for the molecular orbitals with high d orbital character.

z2

metal d orbitals

b.

x2-y2

xy

xz

yz

2.75e 1.125e 

For consideration of L as a -acceptor in the axial position, the identical energy level diagram is obtained regardless of whether L is assigned to position 1 or 6. The xz and yz orbitals are each stabilized by e.

z2

x2-y2

2.75e 

xy

1.125e 

metal d orbitals

e xz

yz

For consideration of L in an equatorial position, the angular overlap result is different depending on whether the -acceptor is placed in position 2 or position 11/12. This is problematic since all three equatorial positions are indistinguishable. For L in position 2:

z2

2.75e 

x2-y2 xy metal 1.125e e d orbitals

1.125e 

yz xz


e


143

For L in position 11 or 12:

z2

metal d orbitals

2.75e 

xy 2 x -y2

b

xz

c

yz

a: 1.125e e b: 1.125e e

a

c: 0.25e

0.75e

Since all three equatorial sites are equivalent, the optimum approach is to consider the weighted average of these two equatorial diagrams, with the second one contributing twice as much as the first since the second diagram is obtained with L in both position 11 and position 12. This average diagram is below:

z2

2.75e xy

x2-y2

metal d orbitals yz c.

xz

1.125e e 0.5e

The axial/equatorial preference for the -acceptor ligand depends on the number of metal valence electrons. The table below assumes low-spin configurations, reasonable on the basis of the -acceptor ligand. Alternate configuration energies would be obtained for high-spin cases. This analysis predicts that the axial position would be preferred for the -acceptor ligand in d 1 to d 7 cases. There is no difference between the configuration energies for the d 8 to d 10 cases. This analysis includes neither the exchange energy nor the coulombic energy of repulsion contributions. Ligand positions are strongly influenced by steric considerations, also not accounted for in this generic case. Equatorial L Configuration Energy 0.5e

Preference: Axial or Equatorial L ?

d1

Axial L Configuration Energy e

d2

2e

e

Axial

d3

3e

1.5e

Axial

d4

4e

2e

Axial

Metal Valence Electron Count


Axial

144

10.15


d5

1.125e  4e

1.125e  2.5e

Axial

d6

2.25e  4e

2.25e  3e

Axial

d7

3.375e  4e

3.375e  3.5e

Axial

d8

4.5e  4e

4.5e  4e

None

d9

7.25e  4e

7.25e  4e

None

d 10

10e  4e

10e  4e

None

The angular overlap diagrams for the molecular orbitals with high d orbital character in square pyramidal (left) and trigonal bipyramidal (right) geometries with -donor ligands are below. In each of these geometries, the -donor ligands pairs are stabilized by 1e; these levels are omitted here.

x2-y2

z2

z2

3e 2e

metal d orbitals xy

xz

yz

x2-y2

xy

xz

yz

2.75e 1.125e 

The energies of the resulting configurations, and the preference between these coordination geometries, depend on electron count and whether the complex is low spin or high spin. The low spin configuration energies (ignoring both the exchange energy and the coulombic energy of repulsion contributions) and preferences are:

Low Spin Preference

0e

Trigonal Bipyramidal Configuration Energy 0e

d2

0e

0e

None

d3

0e

0e

None

d4

0e

0e

None

d5

0e

1.125e

Square Pyramidal

d6

0e

2.25e

Square Pyramidal

d7

2e

3.375e

Square Pyramidal

d8

4e

4.5e

Square Pyramidal

d9

7e

7.25e

Square Pyramidal

d 10

10e

10e

None


Square Pyramidal Configuration Energy

d1


None


145

The corresponding high spin preferences (assuming that configurations with five unpaired electrons are lower in energy than five-electron configurations with electron pairs) are: Metal Valence Electron Count


High Spin Preference

0e

Trigonal Bipyramidal Configuration Energy 0e

d1 d2

0e

0e

None

d3

0e

1.125e

Square pyramidal

d4

2e

2.25e

Square pyramidal

d5

5e

5e

None

d6

5e

5e

None

d7

5e

5e

None

d8

5e

6.125e

Square pyramidal

d9

7e

7.25e

Square Pyramidal

d 10

10e

10e

None

None

Although steric configurations are not part of this angular overlap analysis, the trigonal bipyramidal geometry is never preferred relative to square pyramidal in these cases with five donor ligands. For a set of five -donor/-acceptor ligands, the energy levels are as follows for square pyramidal (left) and trigonal bipyramidal (right). x2-y2

z2

z2

3e

2.75e

2e

metal d orbitals

x2-y2

xy

1.125e e 3.5e

4e xy

xz

yz

xz

yz

The energies of the resulting configurations, and the preference between these coordination geometries, depend on electron count and whether the complex is low spin or high spin. We will assume only low spin configurations here since ligands with combined -donor/-acceptor capabilities tend to stabilize low spin complexes. The low spin configuration energies (ignoring both the exchange energy and the coulombic energy of repulsion contributions) and preferences are:


146

Chapter 10 Coordination Chemistry II: Bonding Low Spin Preference



d1

4e

Trigonal Bipyramidal Configuration Energy 3.5e

d2

8e

7e

Square Pyramidal

d3

12e

10.5e

Square Pyramidal

d4

16e

14e

Square Pyramidal

d5

20e

1.125e  15.5e

Square Pyramidal

d6

24e

2.25e  17e

Square Pyramidal

d7

2e  24e

3.375e  18.5e

Square Pyramidal

d8

4e  24e

4.5e  20e

d9

7e  24e

7.25e  20e

TBP>SP by only 0.5e  4e Square Pyramidal

d 10

10e  24e

10e  20e

Square Pyramidal

Square Pyramidal

Although steric configurations are not part of this analysis, the square pyramidal geometry is clearly preferred relative to trigonal pyramidal in all these cases with five -donor/-acceptor ligands, except with a d 8 metal where the preference is slight. 10.16

a.

Seesaw, using positions 1, 6, 11, and 12 ( donor only) Position

z2

x2 – y2

xy

xz

yz

1 6 11 12 Total

1 1 1/4 1/4 2.5

0 0 3/16 3/16 0.375

0 0 9/16 9/16 1.125

0 0 0 0 0

0 0 0 0 0

Trigonal pyramidal, using positions 1, 2, 11, and 12 ( donor only)

Position

z2

x2 – y2

xy

xz

yz

1 2 11 12 Total

1 1/4 1/4 1/4 1.75

0 3/4 3/16 3/16 1.125

0 0 9/16 9/16 1.125

0 0 0 0 0

0 0 0 0 0


Chapter 10 Coordination Chemistry II: Bonding b. Number of d Electrons

1 2 3 4 5 6 7 8 9 10

10.17

Energies of d Configurations (in units of e) Seesaw Trigonal Pyramidal Low Spin High Spin Low Spin High Spin

0 0 0 0 0.375 0.750 1.875 3 5.5 8

0 0 0.375 1.5 4 4 4 4.375 5.5 8

0 0 0 0 1.125 2.25 3.375 4.5 6.25 8

0 0 1.125 2.25 4 4 4 5.125 6.25 8

c.

The seesaw geometry is favored for d 5—d 9 low spin and d 3, d 4, d 8, and d 9 high spin configurations. For other configurations, both geometries have identical energies according to this approach. (The values shown are for the d orbitals only; each interaction also stabilizes a ligand orbital by e.)

a.

The energies of the molecular orbitals with high d orbital character are as follows: z2

3.5e

xy

x2-y2 2.25e 

metal d orbitals

yz xz The new positions (13 and 14 below) are opposite 11 and 12, and have the same values in the table. z2 is affected most strongly, since two ligands are along the z axis; x2 – y2 and xy are also strongly influenced, since they are in the plane of the six ligands. xz and yz are not changed, since they miss the ligands in all directions. Position

z2

x2 – y2

Xy

Xz

yz

1 2 6 11 12 4 13 14 Total

1 1/4 1 1/4 1/4 1/4 1/4 1/4 3.5

0 3/4 0 3/16 3/16 3/4 3/16 3/16 2.25

0 0 0 9/16 9/16 0 9/16 9/16 2.25

0 0 0 0 0 0 0 0 0

0 0 0 0 0 0 0 0 0


147

148


b.

The D6h character table indicates that z2 has A1g symmetry, x2 – y2 and xy have E2g symmetry, and xz and yz exhibit E1g symmetry.

c.

The energies of the molecular orbitals with high d orbital character are as follows:

z2

3.5e

xy

x2-y2 2.25ee

metal d orbitals

5e yz z2 0 0 0 0 0 0 0 0 0 3.5 e

Position 1 2 6 11 12 4 13 14 Total Overall d.

10.18

x2–y2 0 0 0 3/4 3/4 0 3/4 3/4 3 eπ 2.25 e - 3 eπ

xy 0 1 0 1/4 1/4 1 1/4 1/4 3 eπ 2.25 e - 3 eπ

xz 1 1 1 1/4 1/4 1 1/4 1/4 5 eπ -5 eπ

yz 1 0 1 3/4 3/4 0 3/4 3/4 5 eπ -5 eπ

If we assume that each low spin configuration will have the maximum number of paired electrons, then the configurations with asymmetrically occupied degenerate orbitals are those for d1, d3, d5, and d7 metals. These are expected to give rise to Jahn-Teller distortion.

The ammine Co(III) complex is considerably more stable and is less easily reduced, with the difference primarily in the 3+ species. In addition, the metal in [Co(NH3)6]3+ is surrounded by ammonia molecules, which are more difficult to oxidize than water. This makes transfer of electrons through the ligand more difficult for the ammine complexes.

[Co(H2O)6] [Co(H2O)6]2+

d (1s) d 7 (hs)

–2.4o –0.8o

o 16,750 8,400

[Co(NH3)6]3+

d 6 (1s)

–2.4o

24,000

–57,600

[Co(NH3)6]2+

d 7 (hs)

–0.8o

10,200

–8,160

LFSE 3+

xz

6

LFSE –40,200 –6,720


Difference 33,480 49,440

Chapter 10 Coordination Chemistry II: Bonding –

149

–

10.19

Cl has the lowest o value and fairly good π donor properties that reduce o. F is next, with less π donor ability. Water has very small π donor ability (only one lone pair not involved in  bonding), and ammonia and en have nearly insignificant π donor nor acceptor ability (no lone pairs, antibonding orbitals with the wrong shapes and energies for π bonding). – CN has good π acceptor properties, making o largest for this ligand.

10.20

Ammonia is a stronger field ligand than water. It is a stronger Lewis base ( donor) than water. Water also has a lone pair that can act as a π donor (which leads to a reduction in the ligand field splitting). These factors result in the less electronegative nitrogen on ammonia being a better donor atom than the oxygen atom of water. In the halide ions, all have the same valence electronic structure, so the electronegativity is the determining factor in ligand field strength. Fluoride is also a stronger Brønsted base than the other halides.

10.21

a.

Compression moves dz2 up in energy and lowers the ligand energies of positions 1 and 6.

dz2

eg

d x2–y2

dxz, dyz

t2g

b.

Stretching reverses the changes. In the limit of a square planar structure, dz2 is affected only through interactions with the ring in the xy plane.

dxy

dx2–y2

eg

d z2

dxy

t2g

dxz, dyz

Oh

D4h

10.22

Cr3+ has three singly occupied t2g orbitals and two empty eg orbitals. As a result, its complexes exhibit no Jahn-Teller distortion. Mn3+ has one electron in the eg orbitals; its complexes show Jahn-Teller distortion.

10.23

a. 4–

[Co(CO)4] [Cr(CN)6]

0

2

2.8

–1.6

3+

5

5.9

0

4–

3

3.9

–0.8

3+

0

0

–2.4

0

0

0

1

1.7

–0.6

[Fe(H2O)6]

[Co(NO2)6] [Co(NH3)6] –

[MnO4]

2+

[Cu(H2O)6] b.

LFSE (in o)

0

 0

n –

The two tetrahedral ions ([Co(CO)4]– and [MnO4]–) have zero LFSE (10 or 0 d electrons, respectively) and have ligand equipped to participate in significant π bonding, with CO as an acceptor and O2– as donor. With the exception of [Fe(H2O)6]3+, the others have LFSE values that favor octahedral structures. [Fe(H2O)6]3+ has LFSE = 0 for either


150

Chapter 10 Coordination Chemistry II: Bonding octrahedral or tetrahedral shapes, but water is a slight π donor and Fe(III) is only a moderately good π acceptor. As a result, electrostatics favors six ligands. c.

The difference in the LFSEs can be used to assess the relative stabilities of these geometries for Co(II) and Ni(II): For Co2+:

High-spin octahedral d 7 has LFSE = –0.8o Tetrahedral d 7 has LFSE = –1.2t = –0.53o

For Ni2+:

High-spin octahedral d 8 has LFSE = –1.2o Tetrahedral d 8 has LFSE = –0.6t = –0.27o

Co(II) (d 7) has only –0.27o favoring the octahedral shape, while Ni(II) (d 8) has –0.93o. Therefore, Co(II) compounds are more likely to be tetrahedral than are Ni(II) compounds. 10.24

a.

The ligand field stabilization energies and the LFSEO  LFSET differences are below. h

d

The LFSE is more negative for an octahedral field than the corresponding LFSE for a tetrahedral field, regardless of the ligand field strength. The magnitude of the difference ( LFSEO  LFSET ) provides some insight into preferences between these geometries for h

d

these ions. The likelihood of tetrahedral geometry increases as the energy difference between the octahedral and tetrahedral LFSE decreases. Note that this solution considers both high and low spin tetrahedral complexes even though high spin configurations are more common in tetrahedral complexes. The rightmost column provides the difference between the strong field octahedral LFSE and the weak field tetrahedral configurations. Octahedral Field LFSE Weak Strong

Fe 2+ (d 6 ) Co2+ (d 7 )

Ni2+ (d 8 )

2  o 5 4  o 5 6  o 5

12  5 o 9  o 5 6  o 5



Tetrahedral Field LFSE Weak Strong

8  45 o 16  o 45 24  o 45

LFSEO  LFSET h

48  45 o 36  o 45 24  o 45





Weak — Weak

Strong — Strong

0.222 o

1.333 o

0.444 o

 o

0.667 o

0.667 o

d

Strong (L.S.)— Weak (H.S.) 2.22 o

1.44 o 0.667 o

The magnitudes of the LFSE O  LFSET differences predict the preference for h

d

tetrahedral geometry with weak field ligands to be Fe 2+  Co2+  Ni2+ . The corresponding preference for tetrahedral geometries with a strong field ligand set is predicted as Ni2+  Co2+  Fe 2+ . Note that this ranking is the same with strong field ligands whether the comparison is made to the corresponding high or low spin tetrahedral configuration (the “strong—strong” and “strong—weak” differences offer the same preference rankings). These calculations suggest that the octahedral preference for Fe 2+ and Co2+ is even stronger with a strong field ligand set than with a weak field ligand set.



151

This approach predicts that the Ni2+ preference for octahedral geometry is independent of the ligand field strength. This LFSE analysis does not match the observation that the number of tetrahedral complexes for these ions ranks as Co2+  Fe 2+  Ni2+ , but does suggest that Co2+ is more likely to afford tetrahedral complexes relative to Ni2+ when the ligand field is weak. b.

The energies of these electronic configurations on the basis of the angular overlap model are below. Note that this solution also considers both high and low spin tetrahedral complexes even though high spin configurations are more common in tetrahedral complexes. The rightmost column provides the difference between the strong field octahedral and the weak field tetrahedral electronic configurations, respectively. As in a, the electronic stabilization afforded by the octahedral field is greater than that provided by a tetrahedral field, with the preference for an octahedral geometry over tetrahedral geometry generally more pronounced with strong field ligands (with Ni2+ being an exception with preferences for octahedral geometry that are independent of the ligand field strength).

Oh  Td Strong

Octahedral Weak Strong

Tetrahedral Weak Strong

Weak

Fe 2+ (d 6 )

6e

12e

4e

5.33e

2e

6.67e

Strong (L.S.) —Weak (H.S.) 8e

Co 2+ (d 7 )

6e

9e

4e

4e

2e

5e

5e

Ni2+ (d 8 )

6e

6e

2.67e

2.67e

3.33e

3.33e

3.33e

The magnitudes of the Oh  Td angular overlap differences predict the preference for . The tetrahedral geometry with weak field ligands to be corresponding preference for tetrahedral geometries with a strong field ligand set is predicted as Ni2+  Co2+  Fe 2+ regardless of whether low spin/low-spin (strong— strong) or low-spin/high spin (strong—weak) configurations are compared. This angular overlap analysis does not match the observation that the number of tetrahedral complexes for these ions ranks as Co2+  Fe 2+  Ni2+ , but does suggest that the tetrahedral preference is when the ligands are weak. Neither of these approaches is highly predictive in these cases. The complexity of the effects that govern geometric preferences cannot be encompassed in any single approach. 10.25

The energy levels of the square planar d orbitals are shown in Figure 10.14; those of the octahedral orbitals are shown in Figure 10.5. The seventh, eighth, and ninth d electrons in an octahedral complex go into the highest orbitals, raising the total energy of the complex. In a square planar complex, the seventh and eighth metal d electrons occupy a relatively nonbonding orbital. When strong field -acceptor ligands are employed, the  o between the t2g and eg orbitals increases in octahedral complexes, further stabilizing configurations with 6 or less metal


152

Chapter 10 Coordination Chemistry II: Bonding d electrons. In these cases, the energy of the square planar complex may be more favorable even though the total ligand electron energy is less than in octahedral complexes because there are only four ligands rather than six.

10.26

a.

Square pyramidal complexes have C4v symmetry. C4v  A1 B1 E

2C4 1 1 –1 0

E 5 1 1 2

The z2 and x2–y2 orbitals are the major d orbitals used in the bonding, so the d orbital energies are as shown at right. The z2 orbital is less involved because it is directed primarily toward one ligand, and the x2–y2 orbital is directed toward four ligands.

C2 1 1 1 –2

2v 3 1 1 0

2 d 1 1 –1 0

dx2–y2 d z2 dxz, dyz

d

dxy

 M

b. D5h  A1 E1 E2 A2

z, z2 x – y2 (x, y), (xz, yz) 2

ML5

5L

Pentagonal bipyramidal complexes have D5h symmetry. E 7 1 2 2 1

2C5 2 1 2 cos 72° 2 cos 144° 1

2C52 2 1 2 cos 144° 2 cos 72° 1

5C2 1 1 0 0 –1

h 5 1 2 2 –1

2S5 0 1 2 cos 144° 2 cos 72° –1

2S53 0 1 2 cos 72° 2 cos 144° –1

5v 3 1 0 0 1

z2 (x, y) 2 (x – y2, xy) z

The representation  reduces to 2 A1+ E1 + E2 + A2The d orbitals are in three sets, including a nonbonding pair (dxz and dyz) in addition to the A1 and degenerate E2. dxy, dx2–y2 dz2

d

dxz, dyz

 M

ML7


7L

Chapter 10 Coordination Chemistry II: Bonding 10.27

153

The angular overlap parameters are (Cl), 5430 cm 1 ; e (Cl), 1380 cm 1 ;

e (PPh3 ), 3340 cm 1 ; e (PPh3 ),  310 cm 1 . Application of these values using Tables 10.10 and 10.11 with the ligand positions arbitrarily defined as shown, provides these results: Stabilization of Donor Pairs (7)

1e (Cl)  2e (Cl)  8190 cm1

(8)

1e (PPh3 )  3340 cm1

(9)

1e (PPh3 )  3340 cm

1

1e (PPh3 )  3340 cm

1

(10)

Cl (7)

Co Ph3P (8)

PPh3 (10) PPh3

(9)

The three  acceptor orbitals associated with the PPh 3 ligands are destabilized by

2 e (PPh3 )  207 cm 1 . 3  The energies of the molecular orbitals with high metal d orbital character are shown below. The triphenylphosphine and chloride  interactions and the chloride  interactions contribute to the destabilization of these orbitals, while the  -acceptor capability of triphenylphosphine slightly lowers the energies of the xy, xz, and yz orbitals.

z2 x2  y2

xy

xz yz

2 e (Cl)  2e (PPh3 )  300 cm1 3 2 e (Cl)  2e (PPh3 )  300 cm1 3  1 2 2 1e (PPh3 )  e (Cl)  e (Cl)  e (PPh 3 )  5250 cm1 3 9 3 1 2 2 1e (PPh3 )  e (Cl)  e (Cl)  e (PPh 3 )  5250 cm1 3 9 3 1 2 2 1e (PPh3 )  e (Cl)  e (Cl)  e (PPh 3 )  5250 cm1 3 9 3 (Continued)


154

Chapter 10 Coordination Chemistry II: Bonding The energy level diagram is: 207 cm-1

8

9 10

-acceptor orbitals of PPh3 xy xz yz 5250 cm-1

xy xz yz

z2

x2-y2

z2 x2-y2

300 cm-1

7 8

3340 cm-1 8190 cm-1

8

9 10

9 10

Cl- PPh3 PPh3 PPh3

7

The large degree of stabilization of the chloride donor pair relative to the PPh3 pairs is surprising; triphenylphosphine is generally considered a stronger field ligand relative to chloride. The steric bulk associated with the coordination of three PPh 3 ligands to the Co(I) center may attenuate the donor ability (and acceptor ability) of these ligands in CoCl(PPh3 )3 . The increased -donation of PPh 3 and increased -donation of Cl in NiCl2 (PPh 3 )2 relative to CoCl(PPh3 )3 , respectively, is likely linked to the higher oxidation state of Ni(II) relative to the Co(I). The reduced steric bulk about the Ni(II) center in NiCl2 (PPh 3 )2 relative to around the Co(I) center in

CoCl(PPh3 )3 likely plays a role in increasing the overlap necessary for the -interactions. 10.28

a.

The MO diagram is similar to that for CO, shown in Figure 5.13, with the atomic orbitals of fluorine significantly lower than the matching orbitals of nitrogen. The NF molecule has 2 more electrons than CO; these occupy π* orbitals and have parallel spins.

b.

Because its highest occupied sigma orbital (labeled 5a1 for CO) is significantly

concentrated on the nitrogen, NF should act as a strong donor. In addition, because the π* orbitals are also strongly concentrated on nitrogen, NF should act as a π acceptor at nitrogen. Because the π* orbitals are singly occupied, NF is likely to be a weaker π acceptor than CO, whose π* orbitals are empty. Overall, NF is likely to be relatively high in the spectrochemical series, but lower than CO.

10.29

a.

When these compounds are oxidized, in the positively charged products there is less  acceptance by the CO ligands than in the neutral compounds. Because CO is acting less as a  acceptor in the products, the products have less donation into their π* orbitals, which are antibonding with respect to the C–O bonds. This means that the oxidation products have stronger and shorter C–O bonds than the reactants. In the reference cited, the C–O bonds are calculated to be shortened by 0.014 to 0.018 Å in the PH3 complex and by 0.015 to 0.020 Å in the NH3 complex. Copyright © 2014 Pearson Education, Inc.

Chapter 10 Coordination Chemistry II: Bonding b.

155

In the phosphine compound, oxidation reduces the  acceptance by the phosphine (as it reduces the  acceptance by the carbonyls), and there is weaker Cr–P bonding. Therefore, the Cr–P bond is longer in the product (by 0.094 Å). In the ammine compound, the NH3 is not a  acceptor; it is a  donor only. Because oxidation increases the positive charge on the metal, there is stronger attraction between the metal and the sigma-donating NH3, shortening the Cr–N bond (by 0.050 Å). 2–

10.30

The structure of [ReH9] (Figure 9.35) has a D3h point group. D3h  A1  E A2 E

h 3 1 2 –1 –2

3C2 1 1 0 –1 0

2S3 0 1 –1 –1 1

3v 3 1 0 1 0

x2 + y2, z2 (x, y) (x2 – y2, xy) z (xz, yz)

The representation reduces to 2A1 + 2E + A2 + EThese representations match atomic orbitals on Re as follows: A1 

a.

s, dz2

E

(px, py), (dx2– y2, dxy)

A2

pz

E

10.31

2C3 0 1 –1 1 –1

E 9 1 2 1 2

(dxz, dyz)

Group orbitals:

H

b.

H

Group orbital–central atom interactions: d z2 H

s H

c.

Fe

Fe

pz

H

H

The hydrogen orbitals (potential energy = –13.6 eV) are likely to interact more strongly with iron orbitals that have a better energy match, the 3d (–11.7 eV) and 4s (–7.9 eV). The 3p orbitals of iron are likely to have very low energy (ca. –30 eV) and not to interact significantly with the hydrogen orbitals. (Potential energies for transition metal orbitals can be found in J. B. Mann, T. L. Meek, E. T. Knight, J. F. Capitani, and L. C. Allen, J. Am. Chem. Soc., 2000, 122, 5132.)


156 10.32

Chapter 10 Coordination Chemistry II: Bonding a. In octahedral geometry the s orbitals on the hydride ligands would generate the representation:

Oh  A1g Eg T1u

E 6 1 2 3

8C3 0 1 –1 0

6C2 0 1 0 –1

3C2(=C42) 2 1 2 –1

6C4 2 1 0 1

i 0 1 2 –3

6S4 0 1 0 –1

8S6 0 1 –1 0

3h 4 1 2 1

6d 2 1 0 1

(2z2–x2–y2, x2–y2) (x, y, z)

b.

The representation reduces to A1g + Eg + T1u, as shown above.

c.

The matching orbitals on Cr are: A1g: s ; Eg: dx2-y2, dz2 ; T1u: px, py, pz. The orbital potential energies for the Cr 3d orbitals and H 1s orbitals are -10.75 eV and -13.61 eV, respectively. The energy compatibility of these orbitals suggests the possibility of a relatively robust interaction between the Cr dx2-y2, dz2 orbitals and the group orbitals comprised of hydrogen 1s orbitals. dx2–y2, dz2

o

3d

dxy, dxz, dyz

s Eg

Cr

10.33

a.

D4h

b.

1.

Other group orbitals (A1g, T1u)

CrH6

6H

Because a deuterium atom has only its 1s electron to participate in bonding, there are only three platinum group orbitals that can potentially interact with deuterium: Group Orbitals:

Group Orbital–D Interactions

d z2 pz s Pt

D

Pt

Pt

D

Pt

2.

In each case, sigma interactions could occur, as shown above.

3.

The strongest interactions are most likely between the dz2 orbitals of Pt and the 1s orbital of D. Lobes of the 5dz2 orbitals point toward the D, and their energy (–10.37 eV) is a good match for the valence orbital potential energy of hydrogen Copyright © 2014 Pearson Education, Inc.


157

(–13.61 eV). Both bonding and antibonding molecular orbitals would be formed:

D

Pt

D

Pt

Pt

Pt

10.34

MnO4– has no d electrons, while MnO42– has 1. The slight antibonding effect of this electron is enough to lengthen the bonds. In addition, there is less electrostatic attraction by Mn(VI) in – MnO42– than by Mn(VII) in MnO4 .

10.35

The oxidation product is sketched at right, with the Pd—N distances (pm) provided. The longer Pd—N axial distances (243 pm) relative to the equatorial Pd—N distances (202 and 210 pm) illustrate the Jahn-Teller distortion. The reference indicates that the HOMO has extensive character of the Pd 4d 2 orbital. This orbital also features significant sp 3 character at the axial z nitrogen atoms. Using a ligand with more electron-rich axial nitrogen atoms could possibly increase the energy of the HOMO. One proposal would be the introduction of electron-releasing methyl substituents at the (now) methylene carbons  the tertiary amine nitrogen atoms. One ligand candidate is below. One challenge in “ligand design” is that modifications of a molecule will sometimes prevent its subsequent metal binding (for example, if steric bulk near the donor atoms increases too much). And the synthesis of new ligands often presents significant research challenges, even when the desired modification appears minor.

H 3C

CH3 N

N

N

N H 3C

CH3


N 243

N 210

N

202

Pd

Cl CH3

243

N

158 10.36

Chapter 10 Coordination Chemistry II: Bonding The dimeric structure of [MnL1(N 3 )(OCH 3 )]2 is below, with an abbreviated sketch of the Mn(III) coordinate sphere with bond lengths (pm) at right. The reference states that the three donor atoms of the meridionally coordinated Schiff base ligand and the bridging oxygen atom 189 pm from Mn(III) form an equatorial plane in this distorted octahedral geometry. The significantly longer bond length to the other bridging oxygen atom (223 pm) suggests the presence of Jahn-Teller distortion, but the possibility of a trans effect of the azide ligand (Section 12.7) must also be considered. CH3 N

O

CH3

H

O

N3

N

Mn N

O CH3

O

H

O

CH3

Mn

189

O 223

N3 N

189

199

Mn

O

H3C

217

N3

210

CH3

N

N

10.37. The structure of [Pd(tacn)(Htacn)]3+ is surprising since both non-coordinated nitrogen atoms are positioned on the same side of the plane formed by the four nitrogen atoms bound to the Pd(II) center (syn). This creates more steric hindrance than would be provided by an anti structure. The authors suggest that the orientation of these nitrogen atoms maximizes hydrogen bonding with the nitrate counterions and water in the solid state. An alternate explanation not explicitly stated is an intramolecular hydrogen bond involving both N(1) and N(1) . The palladium-nitrogen core of [Pd(tacn)2 ]3+ is sketched at right (bond lengths in Å with estimated standard deviations), with the slight elongation in the Pd—N(axial) bonds indicating Jahn-Teller distortion. The three unlabeled bonds are equivalent to those trans to them by symmetry; they have the identical bond distances. 10.38

a.

Oh  A1g Eg T1u

E 6 1 2 3

N 2.180(9)

N

2.118(9)

2.111(9)

N

Pd N

N N

8C3 0 1 –1 0

6C2 0 1 0 –1

6S4 2 1 0 1

3C2(=C42) 2 1 2 –1

i 0 1 2 –3

6S4 0 1 0 –1

8S6 0 1 –1 0

3h 4 1 2 1

6d 2 1 0 1

b.

The representation reduces to A1g + Eg + T1u, as shown above.

c.

The matching orbitals on Ti are: A1g: s ; Eg: dx2-y2, dz2 ; T1u: px, py, pz Copyright © 2014 Pearson Education, Inc.

(2z2–x2–y2, x2–y2) (x, y, z)


159

d. dx2–y2, dz2

o

3d

dxy, dxz, dyz

s Eg

Ti

10.39

10.40

10.41

[TiH6]2–

Other group orbitals (A1g, T1u)

6H

a.

The t2g molecular orbitals should involve titanium’s dxy, dxz, and dyz orbitals, the the eg orbitals should involve the metal’s dx2-y2, dz2 orbitals.

b.

A difference from Figure 10.5 that should be noted is that the t2g orbitals of the metal are no longer nonbonding in TiF63– but are involved in the formation of bonding and antibonding molecular orbitals. In comparison with Figure 10.7, the t2g orbitals with greatest metal character should form molecular orbitals that are higher rather than lower in energy in comparison with the dxy, dxz, and dyz orbitals of the free metal ion.

a.

The iron orbitals matching the representation e are the dx2‐y2 and dz2 ; the orbitals matching t2 are the dxy, dxz, and dyz. The d orbital–ligand orbital interactions should appear more indirect than in the case of an octahedral transition metal complex because the lobes of these orbitals do not point directly toward the ligands.

b.

The results for FeCl4– should be simpler than shown in Figure 10.19 because the chloro ligand does not have π* orbitals to be taken into consideration (the LUMO orbitals of CO).

Results may vary considerably, depending on the software used. It is probably more likely that selecting the π-acceptor ligand (CN–), a -donor, and a π-donor will show a trend matching that in Table 10.12 than if a set of three of  -donor or π-donor ligands is used—but examining each type can be instructive.


Chapter 10 Inorg

Recommend Documents