www.jntuworld.com
OR
Code No: CE412
B.Tech(ccc)Regula egularr Examinati Examinations, ons, December December 2007 IV B.Tech(ccc)R PLANNING AND DESIGN OF BUILDINGS (Civil Engineering) Max Marks: Marks: Time: Time: 3 hours hours Answer any FIVE Questions All Questions carry equal marks
100
⋆ ⋆ ⋆ ⋆ ⋆
1. (a) Define Define the the foll follow owing ing terms: terms: Front open pen space, plinth, room oom height, window.
[3+3+3+3]
(b) List the documents documents and details details required required for constructi construction on of building building as laid by the building regulation. [8] 2. Discuss in detail the important factors that should be kept in mind while planning a building. [20] 3. Write short notes on
[10+10]
(a) Architectural Architectural character. character. (b) Massing . 4. (a) What are the the differen differentt climatic climatic zones zones in India? what are are their their characte characteristi ristics cs and where are they located? (b) (b) Write rite about about the the p pla lann nnin ingg of of bui build ldin ings gs in any any one one of thes thesee zone zones. s.
[12+ [12+8] 8]
5. (a) What are the advant advantages ages of living living in flats flats as compare compared d to independen independentt houses? houses? (b) How How does living living in flats flats affect affect the privacy privacy of the families? families? How How can proper proper planning eliminate some of these problems? [10+10] 6. Design Design a College College Canteen Canteen for the following following requirem requiremen ents. ts. Draw a line diagram and assume data suitably. [20] (a) Entrance Entrance Hall. Hall. (b) Dining Hall of 100 Sqm . (c) Staff room of 30 Sqm . (d) Staff room for ladies of 30 Sqm . (e) (e) Kitc Kitchen of 40 Sqm . (f) Store of 15 Sqm . (g) Utility of 20 Sqm. (h) Toilet blocks blocks 2 Nos. (i) Xerox Xerox counter-15 counter-15 Sqm . (j) STD booth-15 Sqm 7. (a) Explai Explain n how sound sound is tran transmi smitte tted. d. 1 of 2
www.jntuworld.com
OR
Code No: CE412 (b) Explain Explain an how the following following affect the sound quality quality. i. frequenc frequency y ii. intensity
[6+7+7]
8. (a) Write a note on the differen differentt types of materials materials that help help in lowering lowering costs costs of construction. (b) Explain the reasons why some innovative innovative construction construction techniques are not successful in bringing down costs. [10+10] ⋆ ⋆ ⋆ ⋆ ⋆
2 of 2
www.jntuworld.com
05
Code No: C4CE03 IV B.Tech( B.Tech(CCC) CCC) Regular Regular Examinatio Examinations, ns, December December 2008
PLANNING AND DESIGN OF BUILDING (Civil Engineering) Time: 3 hours
Max Marks:100 Answer any FIVE Questions All Questions carry equal marks
1. (a) Explai Explain n the follo followin wingg terms terms:: i. Basemen Basementt ii. Ledge iii. Mezzanin Mezzaninee floor. (b) Explain how implementation implementation of building regulations helps helps in improving health and comfort in buildings. [11+9] 2. (a) Enumer Enumerate ate the differ differen entt activi activitie tiess that that take take place place in each each of the follo followi wing ng rooms and based on these prepare a list of furniture required for each. (b) Sketc Sketch h the suggested suggested furniture furniture with sizes sizes and show show clearance clearancess required required for circulation. i. Living room ii. Dining ro om.
[10+10]
3. Prepare Prepare a schema schematic tic design for a college college building, building, with the following following requiremen requirements. ts. Make Make any necessary necessary assumption, assumption, Draw Draw a single line plan. The following following accommodation should be provided in two floors: (a) Class room for 40 students each - 6 nos of 50 sqm each. (b) Principal’s Principal’s room - 20 sqm, with attached attached toilet. toilet. (c) Administr Administrativ ativee Office - 30 sqm. (d) Computer Lab for 40 systems each - 2 nos - 75 sqm. (e) (e) Staff Staff rooms - 4 nos - 25 sqm each. each. (f) Store Room & Records Room - 15 sqm each. (g) Sports Room - 1 No. - 100 sqm. (h) Toilets as required.
[20]
4. What is milestone one chart? How does oes it differ from a bar chart?
[20]
5. (a) Define the the terms terms ‘direct ‘direct cost cost ’, ‘indire ‘indirect ct cost’ cost’ and ‘outage ‘outage losses losses’’ ? (b) What do you you understan understand d by ‘cost ‘cost scope’ scope’ How do you you determine determine it? it? [10+10] 6. Explain briefly the working of the following with a neat sketch. (a) Belt convey conveyor or 1 of 2
www.jntuworld.com
05
Code No: C4CE03 (b) Bucket conveyor.
[20]
7. List List out differen differentt types types of compac compactio tion n equip equipme ment nt avail available able?? Expla Explain in any any one in detail. [20] 8. Explain Explain the wo working rking of following following crushers crushers with a neat sketc sketch: h: (a) Hammer mill (b) Ball mill.
[20]
2 of 2
www.jntuworld.com
OR
Code No: CE412 CE412
IV B.Tec B.Tech.( h.(CCC CCC)) Suppli Supplimen mentar tary y Examin Examinati ations ons,, Decembe Decemberr 2008 2008 PLANNING AND DESIGN OF BUILDINGS (Civil Engineering) Time: 3 hours Max Marks: 100 Answer any FIVE Questions All Questions carry equal marks
1. (a) Differentiat Differentiatee between between natural ventil ventilation ation and artificial artificial ventilati ventilation. on. (b) Define ‘air charges’ charges’ and give give the recommended recommended air changes for the following: following: i. Kitchen ii. Cinema theatres iii. offices.
[10+10]
2. Discuss the practical design considerations to be followed in buildings in: (a) Hot dry dry zones. zones. (b) Hot humid humid zones. zones. (c) Co ol zones.
[8+6+6]
3. Explain with examples how geometrical shapes and forms are used in building comp osition. [20] 4. What What are the main climatic climatic aspects aspects to be consid considered ered for building building design? design? Briefly Briefly explain how they influence the design. [6+14] 5. (a) Draw a bubble bubble diagram/c diagram/chart hart to explain explain the circulation circulation pattern pattern in a 3-bedroomed house, with separate living and dining room, kitchen, store, puja, three toilets and a utility room. (b) How How would ould you you mini minimi mize ze circu circula lati tion on area area in the the above above hous house? e?
[10+ [10+10] 10]
6. Design a College Canteen for the following requirements. Draw a line diagram and assume data suitably. [20] (a) Entrance Entrance Hall. Hall. (b) Dining Dining Hall Hall of 100 Sqm. Sqm. (c) Staff room of 30 Sqm. (d) Staff room for for ladies ladies of 30 Sqm. (e) Kitch Kitchen en of 40 Sqm. (f) Store of 15 Sqm. (g) Utilit Utility y of 20 Sqm. Sqm. (h) Toilet blocks blocks 2 Nos.
www.jntuworld.com
OR
Code No: CE412 CE412 (j) STD booth-15 booth-15 Sqm. Sqm.
7. What are the important points to be kept in mind while planning the following: (a) Bus station stations. s. (b) Industrial Industrial buildings. buildings. (c) Cinema theatres.
[8+6+6]
8. (a) What is is the importa importance nce of low-c low-cost ost housi housing ng in India? India? (b) Explain Explain clearly the problems problems in achieving achieving cost reduction in construction. construction. [10+10]
www.jntuworld.com
NR
Code No: C4CE03
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD B.Tech (CCC) IV Year Examinations February – 2011 PLANNING AND DESIGN OF BUILDING (Civil Engineering) Time: 3 Hours
Max.Marks:100 Answer Any Five Questions All Questions Carry Equal Marks ---
1. a) b)
What do you understand by the term FLOOR AREA RATIO and explain its significance? What is meant by BYE LAWS? What are the objectives behind BYE LAWS? [20]
2.
What are the minimum requirements for different types of rooms in residential buildings and explain their grouping? [20]
3.
Differentiate Differentiat e between hotels and motels. Explain the functional requirements for recreation buildings as per standards. [20]
4. a) b) c)
Explain different types of project controlling. Distinguish between CPM and PERT with examples. Explain clearly with examples about an activity in a network.
5. a) b)
What is a slack time? Will it refer to an activity or an event? How do you standardize or normalize the random curve obtained from a particular network? [20]
6.
Explain the most significant factors affecting ownership costs.
[20]
7.
Explain the operations involved in the production cycle for a scraper.
[20]
8.
Explain different types of vibrators used in compacting fresh concrete.
[20]
*****
[20]
www.jntuworld.com
OR
Code No: CE412
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD B.Tech (CCC) IV Year Examinations February – 2011 PLANNING AND DESIGN OF BUILDING (Civil Engineering) Time: 3 Hours
Max.Marks:100 Answer Any Five Questions All Questions Carry Equal Marks ---
1. a)
b)
Suggest the minimum area requirement for the following areas in residences: i) Habitable room. ii) Kitchen. iii) Bath Room. iv) Stair Case. What minimum height do you recommend for: i) Plinth. ii) Habitable room. iii) Head room for stair case. iv) Depth of foundation. [20]
2.
Discuss the practical design considerations to be followed in buildings in: a) Hot dry zones. b) Hot humid zones. c) Cool zones. [8+6+6]
3. a) b)
What is the significance of unity in composition of buildings? Explain with neat sketches how monotony is relieved in buildings with repeated components. [6+14]
4.
Explain how the following affect motion of air indoors: a) Size and location of windows. b) Design of external projection. c) Effect of landscape elements.
5. a) b)
[8+6+6]
Draw a sketch / bubble diagram indicating the circulation between dining kitchen, store and puja rooms. What should be the minimum size of a store attached to a kitchen? Draw a plan and section to show typical details. [10+10]
www.jntuworld.com
6.
Design a College Canteen for the following requirements. Draw a line diagram and assume data suitably. [20] a) Entrance Hall. b) Dining Hall of 100 Sqm. c) Staff room of 30 Sqm. d) Staff room for ladies of 30 Sqm. e) Kitchen of 40 Sqm. f) Store of 15 Sqm. g) Utility of 20 Sqm. h) Toilet blocks 2 Nos. i) Xerox counter-15 Sqm. j) STD booth-15 booth-15 Sqm.
7.
What do you understand by the following? Explain how they are caused and how they can be rectified. a) Dead spots. b) Sound focii. c) Echo formation. [6+6+8]
8. a) b)
What is the relevance of low-cost housing in developing countries? Explain some techniques to show how you can reduce costs for: a) Superstructure (walls) b) Lintels. c) Doors.
*****
[8+12]
www.jntuworld.com
CODE NO: C4CE03 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD IV B.TECH(CCC) REGULAR EXAMINATIONS JANUARY- 2010 PLANNING AND DESIGN OF BUILDING (CIVIL ENGINEERING) Time: 3hours Max.Marks:100 Answer any FIVE questions All questions carry equal marks ---
1.
Explain clearly the following: a) Lighting and ventilation requirement for different types of buildings. b) Junctions and requirements of open space around buildings. c) Objective and meaning of FAR.
[20]
2.a) What are the different types of residential buildings? Write briefly the advantages and disadvantages of each. b) Explain the circulation pattern between the different parts of the residence and their minimum sizes. [20] 3.
What are the different kinds of educational buildings? Explain the important guidelines for planning and design of the educational building. [20]
4.
What is the utility of CPM & PERT in construction management. management. Briefly explain each. [20]
5.
Write a detailed note on resources leveling and resource allocation.
[20]
6.
Explain the criteria to be considered when a construction company has to purchase/rent any major equipment.
[20]
What are the major types of equipment for earth excavation, moving and compaction. Briefly explain the working of each.
[20]
Write short notes on any three. a) Pumping of water on construction site. b) Estimating output of earth-moving equipment. c) Industrial building. d) Hotels.
[20]
7.
8.
*****
www.jntuworld.com
Code.No: CE412 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD B.Tech (CCC) IV Year Examinations January 2010 PLANNING & DESIGN OF BUILDINGS (CIVIL ENGINEERING) Time: 3 Hours Max. Marks: 100 Answer Any Five Questions All Questions Carry Equal Marks ---
1.a) b)
Define Floor Area. List the areas which have to be included and excluded while calculating Floor Area Ratio. Define Carpet Area. List the portions of building that has to be excluded while calculating carpet area. [10+10]
2.a) b)
Explain the factors to be considered while selecting a site for a school building. Differentiate Differentiat e between Aspect and Prospect with respect to orientation of buildings. [10+10]
3.a) b)
What is the significance of Unity in composition of buildings? Explain with neat sketches how monotony is relieved in buildings with repeated components.
4.a) b)
5.a) b)
[6+14]
What do you understand by orientation of a building and what is the objective of properly orienting a building? Explain the climatic parameters which create distinct climates and the way in which these affect building design. [6+14] Draw a sketch/bubble diagram indicating the circulation between dining, kitchen, store and puja rooms. What should be the minmum size of a store attached to a kitchen? Draw a plan and section to show typical details. [6+7+7]
www.jntuworld.com
6.
Design a small scale industrial building for the following minimum requirements in Ground floor only. (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l)
7.a) b) 8.a) b)
Receptionist room and attached waiting room – 1No. General Manager room with attached toilet – 1No. Managers room – 2Nos. Board room with attached toilet – 1No. Staff change room – 2Nos. Recreation room with Indoor games – 1No. Cafeteria – 1No. Office to accommodate 10 members – 1No. Power room – 1No. Tool room – 1No. Store room – 2Nos. Working space for 50 staff in a single shift-1No.
[20]
Write a note on the absorption of sound by different materials. What are the factors governing the absorption of sound by different materials. What do you understand by resonance and reverberation? [10+10] What is the role of the Government to help in the reduction of costs for housing? Explain any three techniques in construction to bring down costs. ******
[8+12]
www.jntuworld.com
Code. No: C4CE03 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD B.Tech (CCC) IV Year Supplementary Examinations July - 2010 PLANNING AND DESIGN OF BUILDING (Civil Engineering) Time: 3 Hours
Max.Marks:100 Answer Any Five Questions All Questions Carry Equal Marks ---
1.
2.
Write short notes on the following: a) Building bye-laws. b) Classification of buildings. c) Open spaces in buildings.
[20]
Define a) b) c) d)
[20]
the following terms: Plinth Area Ratio. Floor Area Ratio. Carpet Area. Floor Space Index.
3. a) b)
Explain the factors to be considered while selecting a site for a school building. Differentiate Differentiat e between Aspect and Prospect with respect to orientation of buildings. [20]
4.
Determine the slack time for each event and identify the critical path for the project represented by the network given in figure. The value of the expected time for each activity is shown along the arrows. The scheduled completion time is 30 hours. Also identify the sub critical activities. [20]
Contd…2
www.jntuworld.com
::2::
5.
For the network shown in figure, assume that after working 14 days on the project, the following conditions exist:a) Activities 1-2 and 1-3 are complete as originally planned. b) Activity 3-4 is in process and will need 16 more days for completion. c) Activity 4-5 appears to present some problem and its now estimated time of completion is 10 days. d) Activity 4-6 can be completed in 5 days instead of the originally planned 7 days. Update the network and compare the critical paths for the old network and the updated network and thus calculate the remaining duration of the project. [20]
6. a) b)
List out different construction equipment and their specific usage. Explain in detail, earth compaction equipment with neat sketches.
[20]
7.
Explain the working of the following with neat sketches: a) Power Showels. b) Bull Dozers. c) Scrappers. d) Dozers.
[20]
Explain different equipment used during concreting. Describe Drag lines and clean shells.
[20]
8. a) b)
*****
www.jntuworld.com
Code. No: CE412 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD B.Tech (CCC) IV Year Supplementary Examinations July/August - 2010 PLANNING AND DESIGN OF BUILDING (Civil Engineering) Time: 3 Hours
Max.Marks:100 Answer Any Five Questions All Questions Carry Equal Marks ---
1.
Write short notes on the following: a) Building bye-laws. b) Classification of buildings. c) Open spaces in buildings.
[8+6+6]
2.
Sketch a single line plan for a residential building and show the position of doors and windows for good ventilation. [20]
3. a) b)
What is balanced composition of masses? Draw neat sketches of different forms of mass compositions.
4.
Explain how variations in temperature, wind and humidity affect the orientation and planning of a building. [20]
5.
Write short notes on the characteristics characteristic s of the following house types: a) Apartments b) Row houses c) Independent and semi-detached houses.
[6+14]
[6+6+8]
6.
Design a post office for a city for the following requirements and draw a line diagram. [20] a) Public space. b) Space for counters of 10 Nos. c) Space for Post Master chambers with attached toilet -1 No. d) Space for post sarting counter -1 No. e) Space for strong room -1 No. f) Space for store room - 1 No. g) Space for record room - 1No. h) Space for Asst post master chamber with attached toilet - 1No. i) Toilet blocks - 2 Nos. j) Space for rest rest room - 1 No. k) Space for recreation room - 1 No.
7. a) b)
Explain the term reverberation and how can it can be calculated. Is reverberation desirable in different kinds of enclosed spaces? Why? Show the optimum times of reverberation for rooms of different volume. [10+10]
8. a) b)
What are the different ways in which cost of housing for the poor can be reduced? Sketch and explain three construction techniques which will reduce costs. [8+12] --oOo--
www.jntuworld.com
OR
Code No: CE412 CE412
IV B.Tec B.Tech.( h.(CCC CCC)) Suppli Supplimen mentar tary y Examin Examinati ations ons,, June June 2008 2008 PLANNING AND DESIGN OF BUILDINGS (Civil Engineering) Time: 3 hours Max Marks: 100 Answer any FIVE Questions All Questions carry equal marks
1. Discuss Discuss in detai detaill the neces necessi sity ty of regul regulat atio ions ns wh whil ilee plan planni ning ng a build buildin ing. g.
[20] [20]
2. Explain in detail how the orientation of building helps to get good ventilation to a building. [20] 3. (a) What do you understand understand by by the term term “Mass “Mass Composition” Composition” in building building design? design? (b) Explai Explain n the term term “Cont “Contrast rast”” with with referenc referencee to design design of of buildi buildings. ngs.
[10+10] [10+10]
4. Summarise the recommendations of the CBRI for obtaining optimum lignt and ventilation in a building. [20] 5. (a) Draw a bubble bubble diagram/c diagram/chart hart to explain explain the circulation circulation pattern pattern in a 3-bedroomed house, with separate living and dining room, kitchen, store, puja, three toilets and a utility room. (b) How How would ould you you mini minimi mize ze circu circula lati tion on area area in the the above above hous house? e?
[10+ [10+10] 10]
6. Design an village panchayat office for the following requirements and draw a line diagram. [20] (a) Entrance Entrance and waiting waiting room. (b) Meeting Meeting hall to accommod accommodate ate 40 people. people. (c) V.P. V.P. President Chambers with attached toilet. (d) V.P. V.P. Secretary Chambers with attached attached toilet. (e) Office for 10 staff. (f) Toilet oilet blocks blocks - 2 Nos. (g) Necessary Necessary provision provision to be made for corridors. 7. (a) What are the basisc basisc require requiremen ments ts for achiev achieving ing good acoustics acoustics in an auditoauditorium? Explian them briefly. (b) What are the common acoustic problems in auditoria and how can they be rectified? [10+10] 8. (a) What is is the importa importance nce of low-c low-cost ost housi housing ng in India? India? (b) Explain Explain clearly the problems problems in achieving achieving cost reduction in construction. construction. [10+10]
www.jntuworld.com
OR
Code No: CE412 CE412
IV B.Tec B.Tech.( h.(CCC CCC)) Suppli Supplimen mentar tary y Examin Examinati ations ons,, June June 2009 2009 PLANNING AND DESIGN OF BUILDINGS (Civil Engineering) Time: 3 hours Max Marks: 100 Answer any FIVE Questions All Questions carry equal marks
1. Write short notes on the following: (a) Building Building bye-laws bye-laws.. (b) Classification Classification of buildings. buildings. (c) Op en spaces in buildings.
[8+6+6]
2. Write a note on role of a Civil Engineer while while planning and constructing constructing a building. [20] 3. (a) What do you understand understand by by the term term “Mass “Mass Composition” Composition” in building building design? design? (b) Explai Explain n the term term “Cont “Contrast rast”” with with referenc referencee to design design of of buildi buildings. ngs.
[10+10] [10+10]
4. What What are the main climatic climatic aspects aspects to be consid considered ered for building building design? design? Briefly Briefly explain how they influence the design. [6+14] 5. List and explain the factors on which the minimum standards for various areas of residential buildings are based. [20] 6. Design a library building for a college for the following requirements and draw the line diagram. [20] (a) Librarians Librarians room -1No. -1No. (b) Stack Stack room -1No. -1No. (c) Store Store room -1No. -1No. (d) Issue Issue section section - 1No. (e) Referenc Referencee room -1No. -1No. (f) Reading Reading room -1No. -1No. (g) Office Office room -1No. -1No. (h) Entrance Entrance Hall -1No. -1No. (i) Toilet blocks -2Nos. -2Nos. 7. (a) What are are the requirements requirements of ideal ideal sound sound absorbent absorbent material for indoor indoor spaces? spaces? (b) What are the different types of absorbent materials materials availabl availablee for acoustic purp oses? [8+12]
www.jntuworld.com
OR
Code No: CE412 CE412 (b) How can you achieve achieve economy in construction for: i. foundation ii. brick walls iii. flo ors
[8+12]
Available B.Tech(CCC) Previous Question Papers with Solutions
Code. No: C4CE03 JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD B.Tech (CCC) IV Year Supplementary Examinations Examinations July - 2010 PLANNING AND DESIGN OF BUILDING (Civil Engineering) Time: 3 Hours
Max.Marks:100 Answer Any Five Questions All Questions Carry Equal Marks ---
1.
2.
Write short notes on the following: a) Building bye-laws. b) Classification of buildings. c) Open spaces in buildings.
[20]
Define the following terms: a) Plinth Area Ratio. b) Floor Area Ratio. c) Carpet Area. d) Floor Space Index.
[20]
n i . c a . i n e v i r t
3. a) b)
Explain the factors to be considered while while selecting selecting a site for a school building. Differentiate between Aspect and Prospect with respect to orientation of buildings. [20]
4.
Determine the slack time for each event and identify the critical path for the project represented by the network given in figure. The value of the expected time for each activity is shown along the arrows. The scheduled completion time is 30 hours. Also identify the sub critical activities. [20]
Contd…2
o get get est apers pers
t n
rs
:
Available B.Tech(CCC) Previous Question Papers with Solutions
::2:: 5.
For the network shown in figure, assume that after working 14 days on the project, the following conditions exist:a) Activities 1-2 and 1-3 are complete as originally planned. b) Activity 3-4 is in process and will need 16 more days for completion. c) Activity 4-5 appears to present some problem and its now estimated time of completion is 10 days. d) Activity 4-6 can be completed in 5 days instead of the originally planned 7 days. Update the network and compare the critical paths for the old network and the updated network and thus calculate the remaining duration of the project. [20]
n i . c a . i n e v i r t
6. a) b)
List out different construction equipment and their specific usage. Explain in detail, earth compaction equipment with neat sketches.
[20]
7.
Explain the working of the following with neat sketches: a) Power Showels. b) Bull Dozers. c) Scrappers. d) Dozers.
[20]
Explain different equipment used during concreting. Describe Drag lines and clean shells.
[20]
8. a) b)
*****
o get get est apers pers
t n
rs
: