ISO 9001 Succ essor of RITZ-C HANC ANCE E
TEMPORARY GROUNDING EQUIPMENT
Ref.: ATR-031I-01
01 Sucessora d a RITZ-CHANC E
INDEX Product
- Grounding Clamps
Page
05 to 09
- Cluster Grounding Clamps
10
- Suspension Cluster
11
- Accessories - Sectional Hot Sticks - Grip-All Clampsticks (Shotgun)
12 to 14 15 16 - 17
- Heads
18
- Conditioning
19
- AC Voltage Detectors
20
- Grou Groundin nding g and Tempo emporary rary Shor Short-Ci t-Circui rcuiting ting Stick for Seco Secondar ndaryy Syste Systems ms (LV)
21
- Groundi Grounding ng and Tempora Temporary ry Short-Ci Short-Circuiting rcuiting Equipme Equipment nt for Seconda Secondary ry Systems (LV)
22
- Overhead Distribution Grounding Set with Pressure-Type Terminals
23
- Grounding and Temporary Short-Circuiting for Transformer Jumper - 15 kV Class
24
- Grounding and Temporary Short-Circuiting - Cemig Standard
25
- Li Ligh ghtt Gro Groun undi ding ng an and d Tem Tempo pora rary ry Sho Shortrt-Ci Circu rcuiti iting ng for Di Distr strib ibuti ution on Syste Systems ms up to 34 34,5 ,5 kV
26
- Stand Standard ard Grou Groundi nding ng and Temp Temporar oraryy ShortShort-Cir Circuit cuit for Dis Distrib tributio ution n Systems Systems up to 34,5 34,5 kV
27 - 29 29
- Standard Standard Groun Groundin ding g and Temp emporar oraryy Short-Ci Short-Circu rcuitin iting g for Distrib Distributio ution n Syst Systems ems up to 22 kV
28, 30 - 31
- Grounding and Temporary Short-Circuiting with Telescopic Stick for Distribution Systems up to 34,5 kV
32
- Grounding and Temporary Short-Circuiting with Sectional Stick for Distribution Systems up to 34,5 kV
33
- Gro Groun undi ding ng an and d Te Temp mpor orary ary Sho Shortrt-Ci Circu rcuiti iting ng for Tra Trans nsmi missi ssion on Li Line ness up to 50 500k 0kV V Tow Tower erss
34
- Grounding and Temporary Short-Circuiting with Sectional Stick for Transmission Lines up to 138 kV, Wooden, Concrete or Metallic Structures
35
- Grounding and Temporary Short-Circuiting for Substations
36
- Grounding and Temporary Short-Circuiting for Cubicles - 15 15 kV Class
37 - 38
- Socket Ball Clamp for Temporary Grounding
39
- Sequen Sequence ce of Tempora Temporary ry Groundi Grounding ng and Short-Ci Short-Circuiting rcuiting Set Installation Installation - Overhea Overhead d Lines
40
Note: Since the Ritz do Brasil has a policy of continuous product improvement, it reserves the right to change design and specifications without notice.
02
Sucessora d a RITZ-C HANCE
OVERALL GOALS, OBJECTIVES AND OPERATING PRINCIPLES OF RITZ DO BRASIL
We want to conduct a successful, diversified and a nd growing manufacturing business in products and services, that contributes importantly to the uninterrupted supply of electrical energy all over the world, w orld, always having in mind the absolute safety of all electricians and workmen involved involve d in that activity.
EMIL RITZ Director President
03 Sucessora da RITZ-C HANCE
ISO 9001 - CERTIFICATION
Our QUALITY is your SAFETY
04
Sucessora d a RITZ-CHANCE
40 ANOS
40 Years of History
The history of RITZ DO BRASIL S.A., began with the arrival of the young and determined Austrian engineer, Emil Ritz, to Brazil, in 1950. Initially established in Porto Alegre and São Paulo, he transferred to Belo Horizonte in 1955 as a sales representative. In 1960, he founded the company RITZ COMÉRCIO E INDÚSTRIA LTDA., pioneer in Brazil in the manufacturing of thermo-elements for measurement of temperature of liquid steel. This innovating spirit has been a key success factor of the company over the years. RITZ DO BRASIL S.A. was the first Brazilian company to manufacture::
1960 - MICRO THERMO-ELEMENTS FOR THE STEEL-INDUSTRY 1967 - FIBERGLASS CYLINDERS FOR HV-BREAKERS 1968 - CAST EPOXY INSULATORS 1971 - HOT LINE TOOLS & GROUNDING EQUIPMENT 1972 - HV-DETECTORS 1978 - FIBERGLASS LADDERS 1982 - INSULATED HYDRAULIC LIFTING UNITS
Since 1973, RITZ DO BRASIL S.A., is located in the industrial district of Betim, close to Belo Horizonte, on the highway from Belo Horizonte to São Paulo. It was the first industry to settle in this area. In that same year, the company made a joint-venture with the well known American company A. B. CHANCE. During the 16 years of association, the entire technology and manufacturing know-how for all HOT LINE TOOLS (for power distribution networks, substations and transmission lines up to 800 kV) was successfully trasnsferred to the Brazilian company. The registered trademark
is respected by all customers as a symbol of high quality products manufactured according to international technical standards and under a ISO 9001 certified quality system. The selection criteria of its sub-suppliers and a rigorous quality control of the incoming raw materials, the in-process controls and the final testing at the in-house laboratories, guarantee the quality of the products manufactured by RITZ DO BRASIL S.A. The administrative building of RITZ DO BRASIL S.A., was constructed as a copy of the large mansions of the coffee-barons of Brazilian colonial times. Trees and green fields found throughout the premises provide an aggreeable working atmosphere where the RITZ QUALITY achieves a deeper meaning covering not only the products but also environment and leisure activities of the RITZ-TEAM.
ISO 9001
03 05 Sucessora da RITZ-C HANCE
GRAMPOS GROUNDING DE ATERRAMENTO CLAMPS
for overhead distribution systems G3403-B
G1710
G3403-BT
Connection through bronze eye screw, bronze pressuretype terminals.
G1810-2
GAR-2
Smooth jaws, Bronze eyescrew with fine threads, Bronze pressuretype terminal.
Spring-pressure-type, quick contact to be used with DST-1/U cluster.
G1710-T
T-handles for manual connection to grounded structure, bronze pressure-type terminals.
CATALOG N°
G3403-B
G1710
G3403-BT
G1710-T
G1810-2
GAR-2
MATERIAL
ALUMINUM-1 BRONZE-2
BRONZE
ALUMINUM-1 BRONZE-2
BRONZE
ALUMINUM-1 BRONZE-2
ALUMINUM
350
200
350
200
300
-
28.000
12.000
28.000
12.000
28.000
-
20.000 477 22,5 6CU/4CA
8.000 336,4 19,0 6CU/4CA
20.000 477 22,5 6CU/4CA
8.000 336,4 19,0 6CU/4CA
20.000 -14,58 6CU/4CA
6.800 336,4 19,0 6CU/4CA
4,0
4,0
4,0
4,0
4,0
4,0
25 16
70
70
-
16
25 16
25
-
2,3
3,0
2,3
3,0
-
0,45
0,48
0,45
0,6
0,35
Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A) (MCM-CAA) Main Line Range-Max. (Ø mm) (AWG)
Main Line Range - Min. (Ø mm)
Jumper Range - Max. (mm²) 70 Jumper Range - Min. (mm²) 16 3,0 Recommended Torque (kgf/m) 0,48 Weight Each (kg) 1 - Body 2 - Terminal and fastener screw
®
Grounding Clamp FIXED ON R I T Z G L A S POLES Series G3403-B, G1710 and G1810-2 SINGLE MODEL
without extension
EXTENSION MODEL
TELESCOPIC MODEL
with sectional extension
with telescopic extension
CAT. N°
HG3403-BF HG1710-F HG1810-2F
Ø 25mm
CAT. N°
CAT. N°
HG3403-BV HG1710-V HG1810-2V
HG3403-BTL-18 HG1710-TL-18 HG1810-2TL-18 Extended length: 1.800mm Retracted length: 1.090mm
Notes:
1 - Intermediary section can be ordered to Ø 32 x 1.250mm ® RITZGLAS stick.
Extension section Ø 25mm
CAT. N° m m 0 5 2 . 1
m m 0 5 2 . 1
Ø 25mm
VMR/L-I 2 - Base section Ø 32 x 1.450 mm, RITZGLAS ® stick, with sliding - proof handle. CAT. N°
VMR/L-P Note: Other lengths can be
ordered
m m 0 5 2 . 1
Base section Ø 25mm with sliding-proof handle
06 Sucessora d a RITZ-C HANCE
GROUNDING CLAMPS
for transmission lines
C600-0434
G3622-1 Quick fitting by spring and connection through bronze eyescrew, bronze pressure-type terminal.
Serrated interchangeable jaws, quick fitting by spring, connection through bronze eyescrew, bronze pressure-type terminal.
C600-0065 Serrated interchangeable jaws cable connection, with terminal threads.
C600-0965 Serrated interchangeable jaws, bronze eyescrew, bronze pressure-type terminal.
CATALOG N° MATERIAL
Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A) Main Line Range - Max.
(MCM-CAA) (Ø mm) (CU)
Main Line Range - Min. (Ø mm) Jumper Range - Max. (mm²) Jumper Range - Min. (mm²) Recommended Torque (kgf/m) Weight Each (kg) 1 - Body 2 - Fastener screw
G3622-1
C600-0434
C600-0065
C600-0965
ALUMINUM-1 ALUMINUM-1 ALUMINUM-1 ALUMINUM-1 BRONZE-2 BRONZE-2 BRONZE-2 BRONZE-2 400 400 400 400 40.000 35.000 40.000 40.000 25.000 30.000 30.000 30.000 900 1500 954 954 29,0 38,0 30,0 30,0 6 6 6 6 4,0 4,0 4,0 4,0 95 95 95 95
25 3,0 0,68
25 3,0 0,90
25 3,0 0,50
25 3,0 0,72
07 Sucessora da RITZ-C HANCE
GROUNDING CLAMPS
for substations and transmission lines
G4229-1SJ
G4228-10SJ
All-angle, allowing it to be used in continuous angles up to 75° left or right, serrated jaws, bronze eye-screw, bronze pressure-type terminal.
G4229-1/EL
G4228-10/EL
NEW MODELS: with pre-adjustable angles locking system and fixed by butterfly nut, bronze pressure-type terminal, bronze
eyescrew.
CATALOG N° MATERIAL
Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A) (MCM-CAA) (Ø mm) Main Line Range - Max. (IPS) (CU) Main Line Range - Min. (Ø mm) Jumper Range - Max. (mm²) Jumper Range - Min. (mm²) Recommended Torque (kgf/m) Weight Each (kg)
G4229-1SJ
G4228-10SJ
G4229-1/EL*
G4228-10/EL*
ALUMINUM ALUMINUM-1 ALUMINUM-1 ALUMINUM BRONZE-2 AND BRONZE AND BRONZE BRONZE-2 400 400 400 400 40,000 40.000 40.000 40.000
30.000 954 30,0 -2 6,5 95 25 3,0 1,10
30.000 -73,0 2 1/2” 2
30.000
6,5 95
954 30,0 -2 6,5 95
25 3,0 1,70
25 3,0 1,87
1 - Body 2 - Fastener screw * New eyescrew model, which can be used with a hot stick with a ME-U head or a VMR-0198 head.
30.000 -73,0 2 1/2” 2 6,5 95 25 3,0 2,60
08 Sucessora d a RITZ-CHANC E
GROUNDING CLAMPS
for substations
G3368
G3367-1
G3367-2
Bronze body
To be used in rectangular or circular busbar. Bronze eyescrew, bronze pressure-type terminal.
Aluminum body
With movable jaw, allowing a larger variety of connections, with bronze eyescrew, bronze pressure-type terminal.
G3369
C600-0337
Movable adjustable bracket, bronze eyescrew, bronze pressure-type terminal.
Adjustable bracket two terminals for twin grounding cable, bronze eyescrew, pressure-type terminal
CATALOG N°
G3368
G3367-1
MATERIAL
ALUMINUM-1 BRONZE-2
BRONZE
Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A) Main Line Range - Max. (Ø mm or Main Line Range - Min. (Ø mm) Jumper Range - Max. (mm²) Jumper Range - Min. (mm²) Recommended Torque (kgf/m) Weight Each (kg) 1 - Body 2 - Teminal and fastener screw.
400 40.000 30.000 mm) 50 or 12 x 100 5 95 25 3,0 1,00
400 40.000 30.000 63,5
G3367-2
G3369
C600-0337
ALUMINUM-1 ALUMINUM-1 ALUMINUM-1 BRONZE-2 BRONZE-2 BRONZE-2 400 400 400
40.000 30.000 63,5
5 95
5 95
40.000 30.000 100 10 95
25 3,0 2,50
25 3,0 1,10
25 3,5 2,20
40.000 30.000 168 90 95 25 3,5 3,30
09 Sucessora d a RITZ-CHANCE
GROUNDING CLAMPS
for connection to earth
C600-1617
C600-0085
Greater contact area, for metallic structures connection, movable bracket which fits to even and inclined shapes, bronze pressuretype terminal, bronze T-handle.
G3363 - 2
Aluminum body and retainer, Bronze scrubber-type contact pads, Bronze T-handle with fine threads, Bronze pressure-type terminal.
MATERIAL
Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A) Main Line Range - Max. (mm) Main Line Range - Min. (mm) Jumper Range - Max. (mm²) Jumper Range - Min. (mm²) Recommended Torque (kgf/m) Weight Each (kg)
C600-1617
CF-1 *
Aluminum body, Serrated jaws, Bronze T-handle with fine threads, Bronze pressure-type-terminal.
C600-0085
G3363-1
BRONZE ALUMINUM-1 BRONZE BRONZE-2
400 40,000
For connection to grounding rod, metallic structures or ground net. Bronze pressure- type terminal, bronze T-handle.
G3363-4SJ
G3363 - 3SJ
The serrated jaws are suitable for connection to metallic structures, extra fastener screw for a better electric contact, bronze pressure-type terminal
CATALOG N°
G3363-1
400 40.000
30.000 25,4
400 43.000 30.000 102
3,0 95 25 3,0 1,22
G3363-2
Metallic fixing reel, for grounding cables with bronze clamp, fixed by bronze-handle. Aprox. Weight: 1,85 kg.
G3363-3SJ
G3363-4SJ
ALUMINUM-1 ALUMINUM-1 ALUMINUM-1 BRONZE-2 BRONZE-2 BRONZE-2
30.000 Ø 32
400 40.000 30.000 38
400 40.000 30.000 38
400 25.000 25.000 38
51 107
Ø 5,0 95
3,2 95
3,2 95
3,2 95
33 3,0 1,1
25 3,0 1,09
25 3,0 0,80
25 3,0 0,75
25 3,0 0,75
1 - Body 2 - Terminal and screw fastener * for connection to grounding rod and for CAR/ST-04 grounding cable conditioning.
10 Sucessora d a RITZ-CHANC E
CLUSTER GROUNDING CLAMPS
G3803 3-Cluster Set
With Snap-On (Duckbill-type) Aluminumbody clamps. Smooth jaws, Bronze eyescrews with fine threads, and 3-phase Aluminum cluster bar with Bronze Pressure-type terminals.
G3405 3-Cluster Set
HG 3901 3-Cluster (small)
With C-Type Aluminum-boldy clamps. Smooth jaws, Bronze eyescrews with Acme threads, and 3-phase Aluminum cluster bar with Bronze Pressure-typeterminals.
Aluminum Bodied, Snap-On Grounding Clamp. Equipped with cable-insulation anchor straps to provide a positive grip on the grounding cable.
G3405
G3803
HG 3901
ALUMINUM 350 28.500
ALUMINUM 400 36.000
ALUMINUM 400 35.000
20.000 636 24,0 8
25.000 900 29,0 6
Main Line Range - Min. (mm)
3,0
4,0
25.000 900 29,0 6 4,0
Jumper Range - Max. (mm²)
70
95
95
Jumper Range - Min. (mm²)
25 3,0 2,00
25 3,0 3,00
25 3,0 5,45
CATALOG N° MATERIAL Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A)
(MCM-CAA) Main Line Range - Max. (mm) (CU)
Recommended Torque (kgf/m) Weight Each (kg)
11 Sucessora da RITZ-C HANCE
SUSPENSION CLUSTERS A greater efficiency in performing a grounding work depends on the procedures used to connect the clamps to the conductors. RITZ DO BRASIL suspension clusters allow the clamps to be raised simultaneously, providing a safe and quick work sequence.
DST - 1/U
DST - 3
Suitable for installation and removal of spring pressure-type grounding clamps of GAR-2. It has an universal fitting, adaptable to hot-stick with CS-U head. Approximate Weight: 0,49 kg.
Aluminum body, bronze pressure-type terminals, for cables up to 70mm², suitable for G-3403/B clamps. Approximate Weight: 0,62 kg.
G4754-1
DST - 4
Light model, aluminum body, bronze pressure-type terminals for cabels up to 25mm², suitable for G-1710 clamps. Approximate Weight: 0,45kg
Terminal block for 4 bronze pressure-type terminals, for grounding cables from 16mm² to 95mm². Approximate Weight: 0,90 kg.
SADDLE CLUSTERS
Allow placing of an intermediary grounding point on the structure. Available in 3 models, as follows.
DST - 5
Aluminum body, with steel chain and fastening handle granting good electrical contact to the steelstructure.
DST - 5V
DST - 6
Aluminum body, with steel chain and quick locking system.
Economic model, CEMIG Standard, with hot galvanized steel plate.
Approximate Weight: 2,67 kg.
Approximate Weight: 1,60 kg
Approximate Weight: 3,40 kg
CLUSTER SUPPORT, 1 - TERMINAL TYPE Conveniently hangs grounding sets on the pole to facili tate lifting clamps - one at a time to the conductors. Accepts plain ferrules on 25 to 95mm² grounding cable. Copper bar length is 279mm. Catalog N° C600-0152
C600-0152
Description Ground Cluster Support
Weight 4.3 kg
12 Sucessora da RITZ-C HANCE
ACCESSORIES Clamp resting support - HANGER STUDS Hanger studs are mounted on the “main clamp” and permit additional clamps to be fixed and elevated to the conductor through the “main clamp”. It is a safe way to improve the speed of grounding process. Those hanger studs can be mounted on any type of RITZ clamps, except small models G-1710. The C600-0080 stud is to be used with clamps with threaded terminal. CATALOG N° MATERIAL APPROXIMATE WEIGHT ALUMINUM 0,04 kg. G3625 ALUMINUM 0,04 kg. G3626 BRONZE 0,145 kg. C600-0080
G3625 (set)
G3626 (pc)
C600-0080 (pc)
GROUND RODS SCREW GROUND ROD GT3370 Copperweld rod, 17 ± 1mm diameter and 1.500mm total length, steel-tube handle, dismountable for easier conditioning, brass-thread.
SCREW GROUND ROD GT3370-10 Cooperweld rod, 17 ± 1mm diameter and 1.000mm total length, brass thread. Its handle is dismountable for an easier conditioning.
GROUND ROD GT3370-PS 19mm haxagonal sections hot dip galvanized-steel 1.200mm length. With steel head to be installed with a hammer.
Approximate Weight: 3,16 kg.
Approximate Weight: 3,10 kg.
Approximate Weight: 2,90 kg.
Lifting tools for substation grounding jobs This is a complete set for grounding substation busbars, when de-energized for maintenance. Mounted large capacity busbar clamps are available in 2 sizes to reach any manageable height. C600-0621 Bottom Pole
A plastisol coated shepherd Hook lift stick is available to reduce the effort required to raise and install the clamps on the overhead busbar. Cables, ferrules and small grounding clamps should be ordered separately.
C600-0619
C600-0618
ACCESSORIES: C600-0617 - Lift hook assembly, 32 x 2.640mm
block and rope assembly. C600-0620 - 32 x 3.650mm Extension Pole (middle section). C600-0621 - 32 x 2.430mm Bottom Pole. CATALOG N° MATERIAL Continuous Current (A) Fault Current -15 Cycles (A) Fault Current -30 Cycles (A) Main Line Range - Max. (mm) Main Line Range - Min. (mm) Jumper Range - Max. (mm²) Jumper Range - Min. (mm²) Recommended Torque (kgf/m) Weight Each (kg) Pole dimensions (mm)
®
RITZGLAS
C600-0618 ALUMINUM 400 43.000 30.000 168 114 95 25 3,0 4.5 kg 32 x 2.742
pole, includes
C600-0619 ALUMINUM 400 43.000 30.000 114 9,32 95 25 3,0 4.2 kg 32 x 2.690
C600-0620 Extension Pole
C600-0617
T600-0891 Electrostatic Grounding Set Weight each: 3.2 kg.
T600-0891 - Electrostatic Grounding Set “Preassembled for ready use”, includes: ®
- RITZGLAS handle (1.066 x 32mm); - Copper contact hook; - “T-handle” aluminum grounding clamp with 38mm flat face jaws; - Extra-flexible copper Grounding cable, with yellow Neoprene jacket and Copper terminal at each end; - Weight: 3,2 kg.
13 Sucessora d a RITZ-CHANC E
ACCESSORIES Grounding cables and Ferrules Copper Cable Extra-flexible, available in crystal-clear (PVC) insulation providing an easy inspection of the copper-strands of the cable. Can be supplied also with orange insulation granting better visibility of the temporary grounding equipment. CATALOG N°
SHORT CIRCUIT RATING (kA/1s)
SECTION (mm²)
CTC-16 CTC-25 CTC-35 CTC-50 CTC-70 CTC-95
3.5 6.0 8.0 12.0 16.0 20.0
16 25 35 50 70 95
EXTERNAL WEIGHT Ø CA. CA (mm) (kg/km) 10,03 220,00 11,52 318,00 12,90 421,00 14,53 573,00 17,00 793,00 19,03 1.036,00
Aluminum Cable Extra-flexible, much lighter (compared with equivalent copper cable) supplied with crystal-clear PVC insulation, providing an easy inspection of the aluminum strands of the cable. Note: The aluminum cables are supplied in predetermined lengths and with the correct ferrules pressed over the cable in our factory to grant perfect electric connection.
CAT. N°
SHORT CIRCUIT RATING (kA/1s)
CTA-50 CTA-120
7.0 17.5
EXTERNAL APPROX. SECTION DIAMETER WEIGHT (mm²) (mm) (kg/km) 50 120
15 21
225 518
Copper ferrules: Plain-plug type for pressure-type grounding-clamps terminal Shrouded plain copper ferrules
Unshrouded plain copper ferrules
†
†
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
C600-2630 C600-2631 C600-2632 C600-2633
#2 1/0 2/0 4/0
C600-2630A C600-2631A C600-2632A C600-2633A
C600-2614 C600-2615 C600-2616 C600-2617
#2 1/0 2/0 4/0
C600-2614A C600-2615A C600-2616A C600-2617A
†
For 2 units installed, specify cable and length
Threaded-stud type for tapped or drilled grounding-clamps terminals Shrouded threaded copper ferrules
Unshrouded threaded cooper ferrules
†
†
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
C600-2622 C600-2623 C600-2624 C600-2625
#2 1/0 2/0 4/0
C600-2622A C600-2623A C600-2624A C600-2625A
C600-2606 C600-2607 C600-2608 C600-2609
#2 1/0 2/0 4/0
C600-2606A C600-2607A C600-2608A C600-2609A
†
For 2 units installed, specify cable and length
14 Sucessora da RITZ-C HANCE
ACCESSORIES ALUMINUM FERRULES Plain-plug type
for pressure-type grounding-clamp terminals Shrouded plain aluminum ferrules †
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
C600-2626 C600-2627 C600-2628 C600-2629
#2 1/0 2/0 4/0
C600-2626A C600-2627A C600-2628A C600-2629A
Unshrouded plain aluminum ferrules †
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
C600-2610 C600-2611 C600-2612 C600-2613
#2 1/0 2/0 4/0
C600-2610A C600-2611A C600-2612A C600-2613A
Threaded-stud type
Visual inspection of cable condition through clear heat-shrink tube determines breakage or corrosion that otherwise requires continuity test. Factory-assembled units expose 1/2”of cable strands at junction point.
Shrink tubing on Unshrouded plain aluminum ferrules Clear heat-shrink tubes provide corrosion-inhibitor by excluding moisture and stress-relief for cable jacket and ferrule-to-stranding connection. 1 ferrule with heat shrink applied, Catalog No.
Cable Size, AWG
Shrink Tubing only (5-inch length), Catalog No.
C600-1658 C600-1659 C600-1660 C600-1661
#2 1/0 2/0 4/0
P600-1593 P600-1593 P600-1593 P600-1593
for tapped or drilled grounding-clamp terminals Shrouded threaded aluminum ferrules †
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
C600-2618 C600-2619 C600-2620 C600-2621
#2 1/0 2/0 4/0
C600-2618A C600-2619A C600-2620A C600-2621A
Visual inspection of cable condition through clear heat-shrink tube determines breakage or corrosion that otherwise requires continuity test. Factory-assembled units expose 1/2”of cable strands at junction point.
Shrink tubing
Unshrouded threaded aluminum ferrules
on Unshrouded threaded aluminum ferrules Clear heat-shrink tubes provide corrosion-inhibitor by excluding moisture and stress-relief for cable jacket and ferrule-tostranding connection.
†
1 unit each, not installed Catalog No.
Cable Size, AWG
2 units installed Catalog No.
1 ferrule with heat shrink applied, Catalog Nr.
Cable Size, AWG
Shrink Tubing only (5-inch length), Catalog Nr.
C600-2602 C600-2603 C600-2604 C600-2605
#2 1/0 2/0 4/0
C600-2602A C600-2603A C600-2604A C600-2605A
C600-1662 C600-1663 C600-1664 C600-1665
#2 1/0 2/0 4/0
P600-1593 P600-1593 P600-1593 P600-1593
†
For 2 units installed, specify cable and length
15 Sucessora d a RITZ-CHANC E
SECTIONAL HOT STICK Total length 1.450mm (ALL SECTIONS) Working Length 1.250mm Top-section with UNIVERSAL HEAD CS-U
Working Length 1.250mm Intermediary section
Working Length 1.450mm Base Section
STANDARD Model: Catalog N° VMR-15 VMR-30 VMR-45 VMR-70 VMR-90
Description Hot Stick - 1 section Hot Stick - 2 sections (base + top) Hot Stick - 3 sections (base + intermediary + top) Hot Stick - 4 sections (base + 2 intermediary + top) Hot Stick - 5 sections (base + 3 intermediary + top)
Overall length (mm)
Max. Voltage (kV)
1.250 2.700 3.950 5.200 6.450
20 150 300 400 500
Approx. Weight (kg) 0,90 2,30 3,50 4,70 5,90
Diameter of base and intermediary section is 38mm Ø, top section is 32mm Ø
LIGHT MODEL - Exclusivity of RITZ DO BRASIL Offering considerable economic and operational advantages Catalog N° VMR-15/L VMR-30/L VMR-45/L VMR-70/L VMR-90/L
Description Hot Stick - 1 section Hot Stick - 2 sections (base + top) Hot Stick - 3 sections (base + intermediary + top) Hot Stick - 4 sections (base + 2 intermediary + top) Hot Stick - 5 sections (base + 3 intermediary + top)
Overall length (mm) 1.250 2.700 3.950 5.200 6.450
Max. Voltage (kV) 20 150 300 400 500
Approx. Weight (kg) 0,80 1,70 2,50 3,30 4,20
Diameter of base and intermediary section is 32mm Ø, top section is 25mm Ø
Brass fitting pin
Stainless steel protection ring
R I TZ G L A S ®
Fiberglass-epoxy tube, filled with polyurethane foam.
The RITZGLAS ® poles are submitted to 100 kV electrical tests in each 300mm, assuring an ideal insulation. Tests are made according to NBR 6936, ASTM F 711, IEC 855. NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and
inside dividers in order to separate the sections, with EXTRA BAG for heads.
16 Sucessora da RITZ-C HANCE
GRIP-ALL CLAMPSTICKS (”Shotgun”) RITZGLAS ® GRIP-ALL CLAMPSTICK is the most used HOT LINE TOOL and makes p art of any toolset of electrical live line maintenance. The position of the hook is operated through a voidfree pulltruded fiberglass rod, allowing three different basic positions:
OPEN
CLOSED
DRAWN BACK
Position to hook the grounding clamp eye or some other part to be handled.
In this position the hook closes the grounding clamp eye, allowing it to be swivelled, including in angles.
When drawn back into the head, the hook keeps the grounding clamp completely locked to the grip-all stick, which is ideal for its installation and removal.
HINGED STYLE
CS-U Universal head on handle end
Grip-All Clampstick Assist Ring
E403-2543 Universal Adapter
M1867
C403-0298
For universal head on handle end of any Single Piece or Hinged Grip-All, add suffix “A” to Catalog No.
DRAWN BACK
C403-0294
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and
inside dividers in order to separate the sections, with EXTRA BAG for heads.
17 Sucessora d a RITZ-CHANC E
GRIP-ALL CLAMPSTICKS (”Shotgun”) RITZGLAS ® GRIP-ALL CLAMPSTICK is manufactured in three versions: STANDARD - using a 32mm Ø pole. LIGHT - using a 25mm Ø pole (exclusivity of RITZ). HINGED - using a 32mm Ø pole.
STANDARD MODEL Catalog N°
Model
Ø (mm)
Overall Length (mm)
Max. Voltage (kV)
C403-0291 C403-0292 C403-0293 C403-0294 C403-0295
Standard Standard Standard Standard Standard
32 32 32 32 32
1.350 1.970 2.580 3.190 3.800
15 35 138 230 345
Approx. Weight (kg) 2,70 3,00 3,40 3,70 4,10
LIGHT MODEL (EXCLUSIVITY OF RITZ) offering considerable economic and operational advantages Catalog N°
Model
Ø (mm)
Overall Length (mm)
Max. Voltage (kV)
C403-0291/L C403-0292/L C403-0293/L C403-0294/L C403-0295/L
Light Light Light Light Light
25 25 25 25 25
1.350 1.970 2.580 3.190 3.800
15 35 138 230 345
Approx. Weight (kg) 1,90 2,20 2,50
2,80 3,10
HINGED MODEL Catalog N°
Ø (mm)
C403-0296 C403-0297 C403-0298 C403-0299 C403-0342 C403-0343
32 32 32 32 32 32
Dimensions (mm) Folded Extended 1.015 2.005 1.320 2.590 1625 3.200 1.930 3.810 2.235 4.420 2.540 5.030
Approx. Weight (kg) 3,60 4,10 4,50 4,70 5,00 5,20
The Grip-All Stick bags are the ones with an “S” before the reference of each model.
ACCESSORIES
Grip-All Extension - C403-0377
Catalog N° C403-0377 C403-0378 E403-2543 M1867
Description 32mm Ø x 1.200mm Grip-All Extension 32mm Ø x 1.800mm Grip-All Extension
Grip-All Assist Ring Universal Adapter
Approx. Weight (kg) 2,00 2,60 0,68 0,10
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and
inside dividers in order to separate the sections, with EXTRA BAG for heads.
18 Sucessora d a RITZ-CHANC E
HEADS Grounding clamp heads There are three types of heads for grounding clamps, all of them are universal and made with aluminum alloy adaptable to the RITZGLAS ® hot sticks which have CS-U head. ME-U
Clamp locking system by a semi-sphere with adjustable pressure. Approximate weight: 0,20 kg.
VMR-0198
It has a steel shaft, which is inserted into the screw eye and allows a perfect fixing by spring action. Approximate weight: 0,30 kg.
M4455-29B
Clamp locking and unlocking is made through a twisting movement. Allows articulating the grounding clamp, making it easier to work with it in angles. Approximate weight: 0,30 kg.
Heads for switch operation CP-13/U
Bronze head, with shaft for circuit breaker switch operation and cutout-switches operation. Approximate weight: 0,25 kg.
19 Sucessora d a RITZ-C HANCE
CONDITIONING Metallic case For cables and grounding equipment conditioning.
CATALOG N°
DIMENSIONS (mm)
APPROX. WEIGHT (kg)
EMT-01 EMT-01A
180 X 205 X 500 180 X 205 X 650
2,43 2,87
Water-proof Bags Due to the water-proof bags low weight, they are very practical and safe for grounding equipment transportation. These bags are available in the following basic models: a) Grounding Equipment Bags: Made with high resistance water-proof canvas, these bags have inner divisions for a perfect conditioning of the grounding and temporary short circuit equipment. b) Hot Stick Bags: Made with reinforced canvas with inner divisions,suitable for hot sticks and grounding rods conditioning and transportation. c) Case-like Bags: Made with reinforced canvas, with fiberglass bottom, suitable fo r cables and hardware conditioning.
CATALOG No.
SE/ST-01/B SE/ST-02 SE/ST-03 SE/ST-05 SE/ST-05/TL SE/ST-05TL-18 SE/ST-06 SE/LT-3 SE/LT-4 SE/SE-01 SLD-45/T SLM-01 SE/BA-01 SE/SC-10/5 SE/SC-10/4
DESCRIPTION
Canvas bag for grounding equipment model CAR/ST-01/B Canvas bag for grounding equipment model CAR/ST-02 Canvas bag for grounding equipment model CAR/ST-03 Canvas bag for grounding equipment model CAR/ST-05 Canvas bag for grounding equipment model CAR/ST-05/TL Canvas bag for grounding equipment model CAR/ST-05/TL-18 Canvas bag for grounding equipment model CAR/ST-06 Canvas bag for grounding equipment model CAR/LT-03 Canvas bag for grounding equipment model CAR/LT-04 Canvas bag for grounding equipment model CAR/SE-01 Canvas bag for VMR-45 and grounding rod conditioning Case-like bag, with fiberglass bottom Canvas bag, with divisions for cables and grounding equipment hardware, without hot stick and grounding rod Canvas bag for Low Voltage grounding equipment, 05 grips Canvas bag for Low Voltage grounding equipment, 04 grips
APPROX. WEIGHT (kg)
1,95 1,95 2,30 2,30 2,30 2,30 2,10 2,65 2,65 2,30 0,50 4,00 0,70 0,48 0,47
20 Sucessora d a RITZ-CHANCE
AC VOLTAGE DETECTORS Super Tester SUPER TESTER is a monopolar, portable, strong and versatile non-contact voltage detector. Its modern electronic circuits provide quick and safe indications by sound and intermittent luminous warnings. A built-in test circuit is available, which checks the instrument in all its working modes. TECHNICAL CHARACTERISTICS DESCRIPTION CATALOG No. DIMENSIONS
Monopolar high voltage detector SUPER TESTER ® H-1990/ST-138 for 1kV through 138kV AC H-1990/ST-800 for 1kV through 800kV AC 180 mm x 100 mm x 90 mm
- Luminous - with 4 front LEDS WARNING SIGNALS - Sound - with electro-acustic speaker
WORKING FREQUENCY
50 / 60 Hz 9V alkaline battery - 15 hours durability under continuous work
BATTERY
75µA maximum, when emitting signals
DEMAND WORKING TEST
Built-in with front buttom conditioning
APPROX. WEIGHT
Tester: 440g
CONDITIONING
Plastic Case
Case: 360g
Multi-uso tester (110 V through 15 kV) - Detectavolt (1 kV through 15 kV) Monopolar portable non-contact voltage detector, for detecting voltage in AC electric installations. Available i n 2 models, to be used with bare conductors, such as distribution lines, substations, cubicles, etc. TECHNICAL CHARACTERISTICS CATALOG No. WORKING RANGE BATTERY SIGNAL WORKING DIMENSIONS APPROX. WEIGHT CONDITIONING
DMU-15 DTV-15 110 V - 15 k V (AC) 1 kV - 15 kV (AC) One 9V alkaline battery Both: Sound and luminous By contact or induction 110 mm x 70 mm x 28 mm 160 grams Canvas case
Contact tester 2 models: “STANDARD” (with on/off-switch) and “STAND
BY” (without on/off-switch)
CONTACT TESTER is a monopolar contact voltage detector for AC-systems. The updated electronic circuit grants a safe and immediate indication by intermittent sound and flash light. The perfect function of the tester can be checked by pressing a “TESTButton” which activates an internal test-circuit. TECHNICAL CHARACTERISTICS DESCRIPTION MODELS CATALOG No.
DIMENSIONS WARNING SIGNALS
Monopolar contact voltage detector for AC-systems. NORMAL STAND BY CT-01-20 (1 - 20 kV) CT-03-36/SB (3 - 36 kV) CT-05-35 (5 - 35 kV) CT-20-70/SB (20 - 70 kV) CT-20-70 (20 - 70 kV) CT-70-140/SB (70 - 140 kV) CT-130-230/SB (130 - 230 kV) 230 mm x 100 mm x 90 mm - Luminous - with 4 front LEDS - Sound - with electro-acustic speaker
WORKING RANGE
50 / 60 Hz
BATTERY
9V alkaline battery - 15 hours durability under continuous work
DEMAND WORKING TEST APPROX. WEIGHT CONDITIONING
324 mW Built-in with front buttom conditioning 0,590 kg (with case) Plastic case
Note: Other voltage ranges can be provided under request.
21 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING STICK FOR SECONDARY SYSTEMS (LV) Temporary short-circuiting stick for three fase secondary systems Applications It is very simple and practical, allowing simultaneous connection of all three phase conductors to the earth conductor, causing a short circuit with a single move. The fixing grips are connected to the conductor by pressure springs, providing a fast installation, without damaging the conductors. The grips linking bar has a screw in its end, making it possible to connect a conductor to the ground. The temporary short-circuiting stick for secondary systems is used in overhead low voltage lines which are not energized, providing safety during “dead line maintenance” against electrical accidents, which may be caused by an accidental switch of the system, lightning strikes, etc.
Characteristics 25,4mm diameter RITZGLAS ® stick, with dropping device and sliding proof handle.
m m 5 2
m m 5 4
m m 0 0 2
m m 0 0 2
Aluminum alloy Grips and linking bar. Special steel springs. TECHNICAL CHARACTERISTICS
CATALOG N° OVERALL LENGTH NUMBER OF GRIPS MAX. CONNECTION MIN. CONNECTION WEIGHT
CAR/SC-01 CAR/SC-01-5 1.200 mm 1.400 mm 04 05 298,1 mm² 298,1 mm² 9,81 mm² 9,81 mm² 1,10 kg 1,50 kg
m m 0 0 2
m m 5 8 1
m m 5 4 3
m m 0 0 2 1
22 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING EQUIPMENT FOR SECONDARY SYSTEMS (LV) Model: CAR/SC-10/4 Equipment ITEM 01 - 04 un - Ref.: HG-1710-F30 Grounding clamp fixed to a 25/300mm RITZGLAS ® stick, with sliding proof grip (120mm). ITEM 02 - 1,20m - Ref.: CTC-16 Ultra-flexible 16mm² copper cable, with crystal clear insulation. ITEM 03 - 01 un - Ref.: SE/SC-10/4 Canvas bag with inner divisions for equipment conditioning.
Model: CAR/SC-10/5 Equipment ITEM 01 - 05 un - Ref.: HG-1710-F30 Grounding clamp fixed to a 25/300mm RITZGLAS ® stick, with sliding proof grip (120mm). ITEM 02 - 1,60m - Ref.: CTC-16 Ultra-flexible 16mm² copper cable, with crystal clear insulation. ITEM 03 - 01 un - Ref.: SE/SC-10/5 Canvas bag with inner divisions for equipment conditioning.
23 Sucessora d a RITZ-CHANC E
OVERHEAD DISTRIBUTION GROUNDING SET WITH PRESSURE-TYPE TERMINALS Model: T600-0641/B This complete set of ground clamps, cable and accessories supplies all the equipment needed for many types of distribution structures in one easy-to-use kit. The jumper terminals are factory crimped to the grounding cable.
1 1
1
1 3
This kit was designed for use on of structures of 7,2 up to 69 kV.
1
3
This table below lists the various components completely assembly in the Distribution Grounding Set.
Equipment:
3
Item 01 - 10 un - Ref.: C600-0065 Serrated jaw, “C” Clamp, for Plain Plug terminals.
1 1
Item 02 - 01 un - Ref.: C600-0152 Ground Cluster Support. Item 03 - 18 m - Ref.: CTC-25 25mm² Copper Ground Cable, 3 Cables 1,8m long, 1 Cable 3,6m long and 1 Cable 9,0m long. Item 04 - 10 un - Ref.: C600-2618 25mm² Plain Plug Ferrules. Item 05 - 03 un - Ref.: G3626 Clamp Support Stud.
3
2
Item 06 - 01 un - Ref.: GT3370 Screw Ground Rod.
1
3
6
1
1
24 Sucessora d a RITZ-C HANCE
GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR TRANSFORMER JUMPER - Class 15kV Model: CAR/JT-01 Equipment ITEM 01 - 03 un - Ref.: HG1710-600F Bronze grounding clamp, fixed to a 600mm fiberglass pole with sliding proof handle, 2 clamps with double connector and 1 clamp with single connector. ITEM 02 - 3,60m - Ref.: CTC-16 Ultra-flexible 16mm² copper cable, with crystal clear insulation, 2 cables 0,80m long and 1 cable 2,00m long. ITEM 03 - 01 un - Ref.: G1710-T Grounding clamp with “T” type fastening screw. ITEM 04 - 01 un - Ref.: EMT-01A Metallic case for equipment conditioning.
3
2 1 2
1 2 1
25 Sucessora d a RITZ-CHANC E
GROUDING AND TEMPORARY SHORT-CIRCUITING CEMIG STANDARD PHASE
PHASE
1 - PRIMARY EQUIPMENT
PHASE
QUANT. UN.
2,5 m
5,0 m
CAT. N°
04
un
G 3403/B
Aluminum alloy grounding clamp with eye screw.
01
CJ
G 3625
Clamp support.
10
m
CTC-25
25mm² extra flexible copper cable with crystal clear insulation, 2 cables 2,5meters long and 1 cable 5,0 meter long.
NEUTRAL
1
PRIMARY EQUIPMENT
DESCRIPTION
2 - SECONDARY EQUIPMENT QUANT. UN.
CAT. N°
DESCRIPTION
04
un
G 3403/B
Aluminum alloy grounding clamp with eye screw.
1,5
m
CTC - 25
25mm² extra flexible copper cable with crystal-clear insulation, 3 cables 0,5 meters long.
PHASE 0,5 m
3 - SADDLE EQUIPMENT
PHASE
QUANT. UN. 0,5 m PHASE
CAT. N°
DESCRIPTION
02
un
G 3403/B
Aluminum alloy grounding clamp with eye screw.
01
un
DST/6
Saddle cluster.
15
m
CTC - 25
25mm² extra flexible copper cable with crystal-clear insulation, 1 cable 7 meters long and 1 cable 8,0 meters long.
01
un
GT-3370-PS Carbon steel hexagonal grounding rod, 1.200 mm total length.
0,5 m NEUTRAL
2
SECONDARY EQUIPMENT
HOT STICK FOR EQUIPMENT INSTALLATION QUANT. UN.
NEUTRAL
CAT. N°
DESCRIPTION Sectional RITZGLAS ® hot stick, 3.950mm length, including:
7,0 m
SADDLE
01
un
VMR-45/L
* 01 un - VMR/L-S -End element, 25 / 1.250mm, with CS/U head. * 01 un - VMR/L-I - Intermediary element, 32 / 1.250mm. * 01 un - VMR/L-P - Base element, 32 / 1.250mm.
01
un
VMR-0198
Aluminum alloy head for grounding clamp.
01
un
SLD-45/LB
Canvas bag with inner divisions for 3 elements stick and additional bag for heads.
8,0 m
CONDITIONING (OPTIONAL) GROUNDING ROD SADDLE EQUIPMENT
QUANT. UN.
3
01
un
REF. SL/M-01
DESCRIPTION Case-like canvas bag with fiberglass bottom, 250 x 650mm.
26 Sucessora da RITZ-C HANCE
LIGHT GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 34,5 kV Model: CAR/ST-01/L Equipment ITEM 01 - 01 un - Ref.: VMR-45/L - RITZGLAS ® sectional stick, 3.950mm overall length, including:
4 4 5 4
7
01 un - Ref.: VMR/L-S - End element 25/1.250mm with CS-U universal head.
7
01 un - Ref.: VMR/L-I - Intermediary element, 32/1.250mm. 01 un - Ref.: VMR/L-P - Base element, 32/1.450mm. ITEM 02 - 01un - Ref.: CP-13/U - Head for switch operation. ITEM 03 - 01 un - Ref.: VMR-0198 - Head for grounding clamp. ITEM 04 - 03 un - Ref.: G1710 - Twisting grounding clamp, with eye screw. ITEM 05 - 01 un - Ref.: DST-4 - Suspension cluster for simultaneous lifting of all grounding clamps. ITEM 06 - 01 un - Ref.: G1710 -T - Twistin g grounding clamp with “T” screw. ITEM 07 - 04 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 2 cables 2 meters long. ITEM 08 - 12 m - Ref.: CTC-16 - Extra flexible 16 mm² copper cable, with crystal clear insulation.
8
ITEM 09 - 01 un - Ref.: GT3370-PS - Grounding rod, 19mm², hexagonal section, hot galvanized, 1.200mm length. ITEM 10 - 01 un - Ref.: SE/BA-01 - Canvas bag for equipment conditioning (except items 01 and 09). ITEM 11 - 01un - Ref.: SLD-45/T - Canvas bag for hot stick and grounding rod conditioning.
9 6
27 Sucessora da RITZ-C HANCE
STANDARD GROUNDING AND TEMPORARY SHORT CIRCUIT FOR DISTRIBUTION SYSTEMS UP TO 34.5 kV. Model: CAR/ST-01/B 4
Equipment ITEM 01 - 01 un - Ref.: VMR-45 - RITZGLAS ® sectionable stick, 3.950mm total length, including:
4
5
4
7 7
01 un - Ref.: VMR-S - End element 32/1.250mm, with CS-U universal head. 01 un - Ref.: VMR-I - Intermediary element, 38 / 1.250mm. 01 un - Ref.: VMR-P - Base element, 38 / 1.450mm. ITEM 02 - 01un - Ref.: CP-13/U - Head for switch operation. ITEM 03 - 01 un - Ref.: VMR-0198 - Head for grounding clamp. ITEM 04 - 03 un - Ref.: G3403- B - Twisting grounding clamp, with eye screw. ITEM 05 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous grounding clamp raising. ITEM 06 - 01 un - Ref.: G3403-BT - Twisting grounding clamp with “T” screw. ITEM 07 - 16 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, two 2 meters pieces and one 12 meter piece. 7
ITEM 08 - 01 un - Ref.: GT3370-10 - Copper steel grounding rod, 17mm diameter, 1.000mm length, with threaded brass end. ITEM 09 - 01 un - Ref.: SE/ST-01 - Canvas bag for equipment conditioning.
6 8
28 Sucessora da RITZ-C HANCE
STANDARD GROUNDING AND TEMPORARY SHORTCIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 22 kV Model: CAR/ST-02 Equipment
1
1
ITEM 01 - 03 un - Ref.: HG 1710 - F - Twisting grounding clamp, fixed to a 25mm RITZGLAS ® sectional stick, 1.200mm overall length.
2
1 5
ITEM 02 - 01 un - Ref.: DST-4 - Suspension cluster for simultaneously lifting all grounding clamps up to the line to be grounded. ITEM 03 - 01 un - Ref.: GT3370 - Copper steel grounding rod, with brass thread and detachable handle, 1.500mm length. ITEM 04 - 01 un - Ref.: G3363-1 - Fixing clamp, to be connected to grounding rod. ITEM 05 - 16 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 2 cables 2 meters long to connect the clamps to the cluster (ground center) and 1 cable 12 meters long to connect the cluster to the grounding rod. ITEM 06 - 01 un - Ref.: SE/ST-02 - Canvas case for equipment conditioning and transportation.
5
3 4
5
29 Sucessora d a RITZ-CHANC E
STANDARD GROUNDING AND TEMPORARY SHORTCIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 34,5 kV Model: CAR/ST-03 4
4
Equipment ITEM 01 - 01 un - Ref.: VMR-45 - RITZGLAS ® sectional stick, 3.950mm overall length, including:
5
4
8
8
01 un - Ref.: VMR-S - End element 32/1.250mm, with CS-U universal head. 01 un - Ref.: VMR-I - Intermediary element, Ø 38x 1.250mm. 01 un - Ref.: VMR-P - Base element Ø 38 x1.450mm.
8
ITEM 02 - 01un - Ref.: CP-13/U - Head for switch operation. ITEM 03 - 01 un - Ref.: VMR-0198 - Head for grounding clamp. ITEM 04 - 03 un - Ref.: G3403-B - Twisting grounding clamp, with eye screw.
6
ITEM 05 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous lifiting of all grounding clamps.
7 7
ITEM 06 - 01 un - Ref.: DST-5V - Saddle cluster, for intermediary ground point. ITEM 07 - 03 un - Ref. : G340 3-BT - Twist ing grounding clamp with “T” screw. ITEM 08 - 17 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 2 cables 2 meters long , 1 cable 3 meters long and 1 cable 10 meters long.
8
ITEM 09 - 01 un - Ref.: GT3370 - Copper steel grounding rod, 17mm diameter, 1.500mm length, with threaded brass end. ITEM 10 - 01 un - Ref.: SLD-45/T - Canvas bag with inner divisions for hot stick and grounding rod conditioning.
9
ITEM 11 - 01 un - Ref.: SLM-01 - Case-like canvas bag, with fiberglass bottom, for cables and hardware conditioning. 7
30 Sucessora d a RITZ-C HANCE
STANDARD GROUNDING AND TEMPORARY SHORTCIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 22 kV Model: CAR/ST-04 3
Equipment ITEM 01 - 01 un - Ref.: VMR-45/L - RITZGLAS ® sectional stick, 3.950mm overall length, including:
3 7 7
01 un - Ref.: VMR/L-S - End element 25 / 1.250mm, with CS-U universal head. 01 un - Ref.: VMR/L-I - Intermediary element, 32 / 1.250mm. 01 un - Ref.: VMR/L-P - Base element, 32 / 1.250mm. ITEM 02 - 01un - Ref.: CP-13/U - Head for switch operation. ITEM 03 - 03 un - Ref.: GAR-2 - Pressure grounding clamp, quick contact by springconnection. ITEM 04 - 01 un - Ref.: DST-1/U - Suspension cluster, for installation and removal of the grounding clamps. ITEM 05 - 01 un - Ref.: CF-1 - Metallic reel, with brass clamps for connection to the grounding rod and conditioning of ground cable. ITEM 06 - 01 un - Ref.: GT3370-10-T - Copper steel grounding rod, 17mm diameter, 1.000mm length, with threaded brass end. ITEM 07 - 16 m - Ref.: CTC-16 - Extra flexible 16mm² copper cable, with crystal clear insulation, 2 cables 2 meters long and 1 cable 12 meters long.
7
ITEM 08 - 06 un - Ref.: TC-16 - Terminal for 16mm² extra flexible copper cable. ITEM 09 - 01 un - Ref.: EMT-01 - Metallic case for conditioning and transportation of cables and hardwares with handle and lock, orange color. ITEM 10 - 01 un - Ref.: SLD-45/m - Canvas bag with inner divisions for hot stick and grounding rod conditioning.
3
6
5
31 Sucessora da RITZ-C HANCE
STANDARD GROUNDING AND TEMPORARY SHORTCIRCUITING FOR DISTRIBUTION SYSTEMS UP TO 22 kV Model: CAR/ST-05 Equipment
1
1 1
ITEM 01 - 03 un - Ref.: HG3403/B-F - Twisting grounding clamp, fixed to a 25mm RITZGLAS ® sectional stick, 1.250mm overall length.
2 5
5
ITEM 02 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous lifting of all grounding clamps. ITEM 03 - 01 un - Ref.:DST-5V -Saddle cluster, for intermediary ground. 5
ITEM 04 - 03 un - Ref.: G3403/B-T - Clamp for contact with ground. ITEM 05 - 17 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 2 cables 2 meters long, 1 cable 3 meters long and 1 cable 10 meters long. ITEM 06 - 01 un - Ref.: GT3370 - Copper steel grounding rod, 17mm diameter, 1.500mm length, with threaded brass end.
3
ITEM 07 - 01 un - Ref.: SE/ST-05 - Canvas bag for equipment conditioning. 4 4 5
6 4
32 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING WITH TELESCOPIC STICK FOR DISTRIBUTION SYSTEMS UP TO 34,5 kV Model: CAR/ST-05TL/18
3
Equipment
5
5
1
ITEM 01 - 03 un - Ref.: HG3403-BTL/18 - Twisting grounding clamp, fixed to a 25mm telescopic RITZGLAS ® stick, with sliding proof handle and 1.800mm length when extended.
1
ITEM 02 - 01 un -Ref .: G340 3-BT - Twist ing grounding clamp with “T” screw.
1
ITEM 03 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous lifting of all grounding clamps. ITEM 04 - 01 un - Ref. : GT3 370 /PS - 19m m hexagonal section grounding rod, hot galvanized and 1.200mm overall length. ITEM 05 - 16 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 2 cables 2 meters long and 1 cable 12 meters long. ITEM 06 - 01 un - Ref.: SE/ST-05TL - Canvas bag for equipment conditioning. Note: For connection with neutral, add G3403-BT to item 02.
Ref.: 5
4 2
33 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING WITH SECTIONAL STICK FOR DISTRIBUTION SYSTEMS UP TO 34,5 kV Model: CAR/ST-06 Equipment
5 3
7 3
7
ITEM 01 - 01 un - Ref.: VMR-70/L - RITZGLAS ® sectional stick, 5.200mm overall length, including:
3
01 un - Ref.: VMR/L-S - End element 25 / 1.250mm, with CS-U universal head. 02 un - Ref.: VMR/L-I - Intermediary element, 32 / 1.250mm. 01 un - Ref.: VMR/L-P - Base element, 32/1.450mm. ITEM 02 - 01un - Ref.: CP13/U - Head for switch operation. ITEM 03 - 03 un - Ref.: HG3403-BV - Twisting grounding clamp, fixed to a 25 / 1.250mm end element, with device for attachment of an extension to it. ITEM 04 - 01 un - Ref.: G3403-BT - Twisting grounding clamp with “T” screw. ITEM 05 - 01 un - Ref.: DST-3 - Suspension cluster for simultaneous lifting of all grounding clamps. ITEM 06 - 01 un - Ref.: GT337 0/PS - 19mm hexagonal section grounding rod, hot galvanized and 1.200mm total length.
7
ITEM 07 - 16 m - Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 2 cable 2 meters long and 1 cable 12 meters long. ITEM 08 - 01 un - Ref.: SE/ST-06 - Canvas bag for equipment conditioning. Nota: For connection with neutral, add Ref.: G-3403-BT to item 04.
6 4
34 Sucessora da RITZ-C HANCE
GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR TRANSMISSION LINES UP TO 500 kV TOWERS Model: CAR/LT-03 Equipment ITEM 01 - 01 un - Ref.: VMR-70 - RITZGLAS ® sectional stick, 5.200mm overall length, including: 01 un - Ref.: VMR-S - End element 32 / 1.250mm, with CS-U universal head. 02 un - Ref.: VMR-I - Intermediary element, 38 / 1.250mm. 01 un - Ref.: VMR-P - Base element, 38x1.450mm. ITEM 02 - 01 un - Ref.: VMR-0198 - Head for grounding clamp operation. ITEM 03 - 04 un - Ref.: C600-0965 - Twisting grounding clamp, with serrated jaw and eye screw. ITEM 04 - 04 un - Ref.: C600-1617 - Twisting grounding clamp with “T” screw. ITEM 05 - 32 m - Ref.: CTC-95 - Extra flexible 95mm² copper cable, with crystal clear insulation, 4 cables 8 meters long. ITEM 06 - 01 un - Ref.: SE/LT-03 - Canvas bag for equipment conditioning. Note: A smaller grounding cable can be ordered, depending on the short circuit current of the system.
4
4
3 3
4
3
4
3 5
5
5
35 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING WITH SECTIONAL STICK FOR TRANSMISSION LINES UP TO 138kV WOODEN, CONCRETE OR METALLIC STRUCTURES Model: CAR/LT-04 Equipment
3
ITEM 01 - 01 un - Ref.: VMR-45 - RITZGLAS ® sectional stick, 3.950mm overall length, including: 01 un - Ref.: VMR-S - End element 32 / 1.250mm, with CS-U universal head.
4 6
01 un - Ref.: VMR-I - Intermediary element, 38 / 1.250mm. 01 un - Ref.: VMR-P - Base element, 38 / 1.450mm.
3 3
6 4
4
6
3
ITEM 02 - 01 un - Ref.: VMR-0198 - Head for grounding clamp operation. ITEM 03 - 04 un - Ref.: G3622-1 - Twisting grounding clamp with eye screw.
6 7
ITEM 04 - 03 un - Ref.: G3622-1/S - Twisting grounding clamp with support and eye screw. 5
5
ITEM 05 - 03 un - Ref.: G3363-1 - Twisting grounding clamp with “T” screw. ITEM 06 - 31 m - Ref.: CTC-95 - Extra flexible 95mm² copper cable with crystal clear insulation, 4 cables 4 meters long and 1 cable 15 meters long. ITEM 07 - 01 un - Ref.: DST-5V - Saddle cluster, for intermediary ground point. ITEM 08 - 01 un - Ref.: GT3370 - Copper steel grounding rod, 17mm diameter, 1.500mm length, with threaded brass end. ITEM 09 - 01 un - Ref.: SE/LT-04 - Canvas bag for equipment conditioning.
6
8
Note: A smaller grounding cable can be ordered, depending on the short circuit current of the system.
5
36 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR SUBSTATIONS Model: CAR/SE for substation up to 138 kV.
4
6
5
Note: Single phase representation
Equipment ITEM 01 - 01 un - Ref.: VMR-90 - RITZGLAS ® sectional stick, 6.450mm overall length, including: 01 un - Ref.: VMR-S - End element 32 / 1.250mm, with CS-U universal head. 03 un - Ref.: VMR-I - Intermediary element, 38 / 1.250mm. 01 un - Ref.: VMR-P - Base element, 38 / 1.450mm ITEM 02 - 01 un - Ref.: CP13/U - Head for switch operation. ITEM 03 - 01 un - Ref.: ME/U - Intermediary head for grounding clamp installation. ITEM 04 - 03 un - Ref.: G3368 - Bus bar grounding clamp. ITEM 05 - 03 un - Ref.: G3363-1 - Clamp for contact with ground. ITEM 06 - 03 un -Ref.: CTC-25 - Extra flexible 25mm² copper cable, with crystal clear insulation, 10 meters length. ITEM 07 - 01un - Ref.: SE/SE - Canvas bag NOTE: The components of the set above support a specific substation pattern and there are cases which the cable length and/or diameter must be changed, as well as the grounding clamps, depending on the heights of the structures, short circuit currents or the diameter/width of the bus bars. To define the proper cables and clamps, refer to other sections of the present catalog.
37 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR CUBICLES - 15 kV CLASS. LIGHT PRACTICAL SAFE
TWISTING BRONZE CLAMP FIBERGLASS POLE SLIDING PROOF HANDLE
Two models, that provide a perfect connection, either in rectangular or circular section bus bar. For rectangular section bus bar, please see pictures 02 and 04, in order to choose the correct clamp.
INSTALLATION POSITION DETAILS Clamp Cat. N°: HT600-0465F
FIG. 01
FIG. 02
Clamp Cat. N°: HG1710-600F
FIG. 03
FIG. 04
38 Sucessora d a RITZ-CHANC E
GROUNDING AND TEMPORARY SHORT-CIRCUITING FOR CUBICLES - 15 kV CLASS MODEL: CAR/CB-01 ITEM 01 - 03 un - Ref.: HT600-0465F Bronze twisting grounding clamp, fixed to a fiberglass pole with sliding proof handle, 600 mm overall length. ITEM 02 - 09 m - Ref.: CTC-25 Extra flexible 25mm² copper cable, with crystal clear insulation, 3 meters length. ITEM 03 - 01 un - Ref.: G3363-1 Bronze alloy twisting grounding clamp with “T” screw, for connection with ground.
MODEL: CAR/CB-02 ITEM 01 - 03 un - Ref.: HG1710-600F Bronze twisting grounding clamp, fixed to a fiberglass pole with sliding proof handle, 600mm overall length. ITEM 02 - 09 m - Ref.: CTC-25 Extra flexible 25mm² copper cable, with crystal clear insulation, 3 meters length. HT600-0465F
HG1710-600F
ITEM 03 - 01 un - Ref.: G3363-1 Bronze twisting grounding clamp with “T” screw, for connection with ground. TECHNICAL CHARACTERISTICS
G3363-1
Maximum working voltage Continuous Current Fault current 15 cycles Fault circuit current 30 cycles Main line range - Max. Main line range - Min. Recommended torque Approximate weight - without case - with case
15kV 200 A 12.000 A 8.000 A 19 mm 4 mm 2 DaN/m 6.850 kg 9.650 kg
CONDITIONING
Ref.: EMT-01A Orange metallic case, 175 x 295 x 650mm, with handle, two quick catches and padlock. COMPLEMENTARY ITEM
EMT-01A
Ref.: DMU-15 or DTV-15 MULTI-USO TESTER voltage detector,110V through 15kV or DETECTAVOLT voltage detector, 1 kV through 15 kV. IMPORTANT NOTE:
Never install the Grounding and Temporary Short-Circuiting set without making sure there is no voltage in the working site. Use a Multi-Uso Tester or Detectavolt voltage detector. For further information, please refer to its specific catalog.
DMU-15
39 Sucessora d a RITZ-CHANCE
SOCKET BALL CLAMP FOR TEMPORARY GROUNDING INTRODUCTION:
The new SOCKET BALL clamp was designed to solve many kinds of problems regarding temporary grounding, such as insufficient space or contact surface for installation. Inside cubicles, specially the ones with rectangular bus bars, where the regular clamps are too big to be used, SOCKET-BALL clamps overcome installation difficulties with extreme operational easiness, providing a safe connection able to withstand high short circuit currents.
SOCKET BALL TEMPORARY GROUNDING CLAMP
USE:
A brand new model, the SOCKET-BALL clamp is suitable for grounding of: - Cubicles; - Indoor and outdoor substations; - Hot line vehicles; - Painted transmission lines structures, where it is not possible to get a perfect electric contact using regular grounding clamps.
FLV-3584 SOCKET-BALL Clamp
ADVANTAGES:
- Reduced size and weight; - High currents withstand; - High mechanical strength; - Multiangular installation position.
FLV-3585 BALL Pin
TECHNICAL CHARACTERISTICS: Ref.: FLV-3584
SOCKET-BALL temporary grounding clamp. - Bronze; - Eye fastening screw; - M8 screw, nut and ring, for fixation of the terminal to the grounding cable; - Installation torque: 3 DaN/M; - Max. Short circuit current: 30.000 A - 30 cycles 43.000 A - 15 cycles - Approximate weight: 0,40 kg.
POSITIONS
Ref.: FLV-3585
BALL PIN for temporary grounding point. - Tinned steel screw; - M12 x 40mm thread, nut and bronze ring. - 26mm diameter tinned bronze alloy connection ball. - Installation torque: 3,5 DaN/M; - Approximate weight: 0,20 kg.
MULTIANGULAR
Note: There must be ordered enough ball pins to be installed in the
bus bars, terminals and other parts of the electrical system, providing enough grounding points. COMPLETE SET: For ordering a complete grounding equipment, including clamp, ball pin, cable, insulated stick, voltage detector, conditioning bag, a.s.o., Talk to our Sales Department in order to have each of these items correctly dimensioned, obtaining therefore, an equipment able to meet both the electric and mechanical requirements of your installation. POSITIONS
40 Sucessora d a RITZ-CHANCE
SEQUENCE OF TEMPORARY GROUNDING AND SHORT-CIRCUITING SET INSTALLATION - OVERHEAD LINES
With Contact Tester high voltage detector attached to a RITZGLAS ® hot stick, verifies that the system is deenergized..
Install the ground rod and attach the proper grounding clamp to its vertical shaft. The ground rod should be driven as deep as possible, leaving above the ground only the length needed to attach the grounding clamp.
Previously fixed to the pole, connect the saddle cluster support to the ground rod through the proper grounding clamps and cable.
Detail of saddle cluster support, which will also be connected to phase conductors through proper grounding clamps and cables.
Using a suspension cluster set and a RITZGLAS ® hot stick, slowly lift the clamps and connect the set to the central phase.
Always using a RITZGLAS ® hot stick, as is usual in hot line maintenance, remove one clamp from the cluster set and connect it to the lateral phase.
Repeat the last step, connecting the third clamp to the other lateral phase, concluding the short circuit of the three phases. Note: The clamps must be attached directly to the conductor and never to preformed wire connections or similar.
After the installation of the grounding set is over, the eletrician is allowed to have access to the conductors, that is to say, the line can be assumed to be de-energized only when it is properly grounded..