es un manual que describe el uso de un driver de motorFull description
Full description
Manual de usuario de bomba de infusion
Descrição completa
filament winding
user manual for users to use this usable things
user manual diesel engines
CarProg user manual
Powering up the device. CarProg can be used with external power supply (+7 - +12V stabilized), only with USB connection or with diagnostic cable ( for ex. OBDII) • Standard power socket (positive in the middle) voltage in range +7…14V stabilized can be used in any cases. Use it when +12V voltage is required (Transponder read/write, some MCU`s read/write)
•
USB power from PC - 5V, 100mA. Always must be connected because USB cable is used for Device – PC communication. Is enough for small power consumption operations (i.e. EEPROM read/write)
All right reserved www.codecard.lt
1
•
Using standard Car diagnostic Cable
Installing software. Copy software from CD or from your support page on www.codecard.lt to any directory on your PC. Main CarProg file can be older version, just click on Update-Internet and CarProg will by updated automatically.
All right reserved www.codecard.lt
2
After update CarProg software must restart automatically and CarProg hardware update must be done. Don’t disconnect CarProg USB cable while update process. If updates fail, try again.
