THAPAR UNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016 CAMPUS INTERVIEWS
1.
Name of the Organization:
NXP SEMICONDUCTORS INDIA (www.nxp.com)
Branches of Engineering:
BE - CS/EC/EIC
Profile : BE – CS - Software - only Internship BE- EC/EIC – Design Hardware – Internship & Job Eligibility Criteria
10th, 10+2/Dip Graduation Present CGPA8.00
Process of Interviews:
Written test Technical & Aptitude test Interviews
60% 60%
2.
P.P.T. & entire process will be in Auditorium on 10.10.2016 at 9.00 AM.
3.
Submit the following details to placement coordinators of the branch by 06.10.2016 by 5.00 PM. Sr. No.
Name to the student
Roll No.
%age of marks 10th
4.
CTC
~
Present CGPA
10+2/Dip.
Rs. 20,000/- PM Stipend during internship Rs 11.19 Lacs p.a. Organization under dream status
5.
Students should bring Hard Board along with few A-4 size blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC:
HCSED/HECED/HE&IED - for kind information and request to nominate faculty placement council member for slots for project semester. THAPAR UNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016
1.
Name of the Organization:
SAP LABS INDIA (www.sap.com)
Branches of Engineering:
B.E. – CS M.E. – CS/SOFT/IS/CSA MCA
Eligibility Criteria
Present CGPA7.00
Process of Interviews:
Online Test Four rounds of Interviews
2.
Online Test on 10.10.2016 at 2.00 P.M. P.P.T. & entire process will be in TU / PEC on 21.10.2016 at 9.00 A.M.
3.
Placement Coordinators of the branch should submit the following details by 06.10.2016 by 5.00 P.M.
Sr. No.
Name to the student
Roll No.
%age of marks 10th
4.
CTC
~
10+2/Dip
Rs. 25,000/- PM during internship Rs. 10.00 lacs p.a.
Graduation for MCA/ME
Present CGPA
Organization under dream status
5.
Students should bring Hard Board, Two photographs along with few A-4 size blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC:
HCSED/HE&IED/HEC&ED – for kind information and request to nominate faculty placement council member for slots for project semester. THAPARUNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016 CAMPUS INTERVIEWS 1.
Name of the Organization:
NEWGEN SOFTWARE TECHNOLOGIES (www.newgensoft.com) Profile Enclosed.
Branches of Engineering:
B.E. - CS
Eligibility Criteria:
10th, 10+2 CBSE Board 10th, 10+2 other Board Present CGPA
85% 75% 6.50
Formal Schooling (Should not be pass out of NIOS or any open schooling)
Process of Interviews:
Online test Aptitude Test English language Technology Test Psychometric Test Techno Puzzle round Interviews
2.
P.P.T. & entire process will be in C-Hall on _______at 9.00AM.
3.
Submit the details in following format to placement coordinators of the branch by 08.10.2016 by 5.00 PM. Sr. No .
Name of the student
Roll No.
%age of marks
10th
~
Board
Present CGPA
10+2/Dip
4.
CTC
Rs. 15,000/- PM stipend during internship Rs. 6.25 lacs P.A.
5.
Students should bring Hard Board along with few A-4 size blank papers and Institute I.Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC:
HCSED – for kind information and request to nominate placement council member for slots for project semester
THAPAR UNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016 CAMPUS INTERVIEWS
1.
Name of the Organization:
CDK GLOBAL (INDIA) PVT. LTD. (www.cdkglobal.com)
Branches of Engineering:
B.E. - CS/EC/EIC M.E. - CS/SW/CSA/EC
Eligibility Criteria
Present CGPA7.00
Process of Interviews:
Online test Aptitude test Technical test Three rounds of Interviews
2.
P.P.T. & entire process will be in Auditorium on ___ at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by 08.10.2016 by 5.00 PM.
Sr. No.
Name to the student
Roll No.
%age of marks 10th
~
10+2/Dip
Graduation ME
Present CGPA for
4.
CTC
Rs. 6.00 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC: HCSED/HE&ECD/HE&IED- for kind information and request to nominate placement council member for slots for project semester. THAPAR UNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016
CAMPUS INTERVIEWS
1.
Name of the Organization:
EDIFECS TECHNOLOGIES PVT. LTD (www.edifecs.com)
Branches of Engineering:
B.E. - CS/EC/EE/EIC MCA
Eligibility Criteria
Present CGPA6.00
Process of Interviews:
Online Test Group Discussion Two rounds of Interviews
2.
P.P.T. & entire process will be in Auditorium on ___ at 09.00 A.M.
3.
Submit the following details to placement coordinators of the branch by 08.10.2016 by 5.00 p.m.
Sr. No .
Name to students
the
Roll No.
%age of marks
10th
10+2/Dip.
Graduation for MCA
Present CGPA
4.
CTC
~
Rs. 20,000/- p.m. during internship Rs. 4.50 lacs p.a
5.
Students should bring Hard Board along with few A-4 size blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC:
HCSED/HE&ECD/HE&IED– for kind information and request to nominate faculty placement council member for slots for project semester.
THAPAR UNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016 CAMPUS INTERVIEWS 1.
Name of the Organization:
SHORE TEL INC (www.shoretel.com)
Branches of Engineering:
B.E. - CS/EC
Eligibility Criteria
10th, 10+2 Present CGPA7.00
70%
Academic gap (after HSc.) are not allowed Process of Interviews:
Written test Aptitude test Technical test Three rounds of Interviews
Requirements: Knowledge of C, C++,Java, C#, Ruby, AJAX, Java script
Good understanding of Computer Sc. Fundamentals, data structures and algorithms Good problem solving skills An interest and aptitude for delivering reliable, high performance in distributed systems with imperfect networks.
2.
P.P.T. & entire process will be in Auditorium on _________ at 9.00 AM.
3.
Submit the following details to placement coordinators of the branch by 07.10.2016 by 5.00 PM.
Sr. No.
4.
Name to the student
CTC
~
Roll No.
%age of marks 10th 10+2/Dip.
20,000/- p.m. during internship Rs. 8.00 lacs p.a.
Organization under dream status
Present CGPA
5.
Students should bring Hard Board along with few A-4 size blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC:
HCSED/HE&CED- for kind information and request to nominate faculty placement council member for slots for project semester
THAPAR UNIVERSITY, PATIALA CENTRE FOR INDUSTRIAL LIAISON AND PLACEMENT
Dated: 05.10.2016 CAMPUS INTERVIEWS
1.
Name of the Organization:
TINYMESH REDIOCRAFTS INDIA (www.tmrcindia.com)
Branches of Engineering:
BE- CS / EE / EC /EIC
Eligibility Criteria
10th, 10+2 No CGPA Criteria
60%
No Backlog courses at present.
Process of Interviews:
Shot listing based upon bio-data’s Written Test Group Discussions Three rounds Interviews
2.
P.P.T. & entire process will be in Auditorium on ____ at 9.00 A.M.
3.
Submit the following details & soft copies of bio-data’s to placement coordinators of the branch by 08.10.2016 by 5.00 PM.
Sr. No.
Name to student
the
Roll No.
%age of marks 10th
~
Present CGPA
10+2/Dip.
4.
CTC
Rs. 7.00 lacs p.a.
5.
Students should bring Hard Board along with few A-4 size blank papers and Institute Identity Card at the time of written test.
( H.S. Bawa ) Industrial Coordinator CC:
HCSED/HE&IED/HE&CED- for kind information and request to nominate faculty placement council member for slots for project semester