TEMENOS – PBG – Country Country Model Bank Build Control Tool INSTALLATION GUIDE
Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, for any purpose, without the express written permission of TEMENOS HEADQUARTERS HEADQUARTERS SA. COPYRIGHT 2007 - 2008 TEMENOS HEADQUARTERS SA. All rights reserved.
Installation Guide
Amendment History Version Date
Author / Changed By
Change Description
0.1
09-Jan-2013
Vinoth Kumar P Initial Document
1.0
09-Jan-2013
Balaji M
Reviewed
Comments:
Build Control Installation Guide
GPACK 2
Installation Guide
1. Table of Content 1.
Table of Content ........................................................... ................................................................................................................. ...................................................... 3
2.
General Considerations ........................................................... ...................................................................................................... ........................................... 5
3.
Contents of the Package .................................................................................................... .................................................................................................... 6
4.
3.1
Source Codes: .......................................................................... ......................................................................................................... ............................... 6
3.2
Insert Files: .............................................................................................................. .............................................................................................................. 7
3.3
Data Records: ............................................................... .......................................................................................................... ........................................... 7
Steps for Installing the Package .......................................................... ....................................................................................... ............................. 10 4.1
Pre-Installation steps ............................................................................................. ............................................................................................. 10
4.2
Installation steps for DL pack ................................................................................ 10
4.3
Directory Creations .............................................................................. ................................................................................................ .................. 11
4.4
Setting up Company Record: ................................................................................ 12
4.5
Creation of AUTO.ID.START................................................................................. 12
4.6
Setup the Build Control Parameter Record ........................................................... ........................................................... 13
Date dependent
-
Sign-On/Sign-off required during deployment -
Yes
Special Instructions involved
No
-
GPACK 3
No
Installation Guide
About this Document This document aims at explaining the installation procedures required to install this package successfully in T24.
Scope The Scope of the document is to cover the release mechanism of the PRMT.
Terminology Used Naming Standards for the components
GPACK 4
Installation Guide
System Requirements The following are the pre-requisites for installing this package.
T24 R08 or Above
TAFC R10 or Above
2. General Considerations
When transferring object code via via FTP the transport method must be set to binary. binary. When transferring data libraries via FTP the transport method must be set to ASCII and the FTP client should be configured to preserve the case names of the source files.
GPACK 5
Installation Guide
3. Contents of the Package
The pack contains the below source codes
3.1 Source Codes: BCON.ANALYSE.OFS.MSG BCON.AUTHORISE.DL.RESTORE BCON.CHECK.FIELDS BCON.CHECK.ID BCON.CHECK.RECORD BCON.COMPLEMENT.TXTINP BCON.CREATE.VERSION BCON.CROSSVAL BCON.DICT.RELEASE BCON.FIELD.DEFINITIONS BCON.GENERATE.DOC BCON.MAINTAIN.AUDIT BCON.OPEN.FLAT.FILE BCON.PARAMETER.CHECK.FIELDS BCON.PARAMETER.CHECK.RECORD BCON.PARAMETER.CROSSVAL BCON.PARAMETER.FIELD.DEFINITIONS BCON.PGM.RELEASE BCON.PRODUCT.CHECK.FIELDS BCON.PRODUCT.CHECK.RECORD BCON.PRODUCT.CROSSVAL BCON.PRODUCT.FIELD.DEFINITIONS BCON.RELEASE.AUDIT.FIELD.DEFINITIONS BCON.SAVE.AUDIT.FIELD.DEFINITIONS BCON.USER.CONCAT.FIELD.DEFINITIONS BUILD.CONTROL BUILD.CONTROL.CLOSE BUILD.CONTROL.LOAD BUILD.CONTROL.OPEN BUILD.CONTROL.PARAMETER BUILD.CONTROL.PRODUCT BUILD.CONTROL.RELEASE BUILD.CONTROL.RELEASE.AUDIT
GPACK 6
Installation Guide
BUILD.CONTROL.RUN BUILD.CONTROL.SAVE BUILD.CONTROL.SAVE.AUDIT BUILD.CONTROL.USER.CONCAT IN2BCON.FILEPATH MULTI.GET.LOC.REF V.BCON.AUTO.UPDATE V.RAD.FIX.THE.BATCH.ID
3.2 Insert Files: I_F.BUILD.CONTROL I_F.BUILD.CONTROL.PARAMETER I_F.BUILD.CONTROL.PRODUCT I_F.BUILD.CONTROL.RELEASE.AUDIT I_F.BUILD.CONTROL.SAVE.AUDIT I_F.BUILD.CONTROL.USER.CONCAT I_LREF.COMMON I_RAPID.APP.DEV.COMMON I_RAPID.APP.DEV.EQUATE
3.3
Data Records:
FILE.CONTROL>BUILD.CONTROL PGM.FILE>BUILD.CONTROL PGM.FILE>V.RAD.FIX.THE.BATCH.ID EB.API>V.RAD.FIX.THE.BATCH.ID STANDARD.SELECTION>BUILD.CONTROL EB.ERROR>EB-BCON.DATA.FILE.MISSING EB.ERROR>EB-BCON.FILE.NOT.TYPE.UD.19 EB.ERROR>EB-BCON.FILE.SHOULD.BE.OF.TYPE EB.ERROR>EB-BCON.INVALID.COMPANY EB.ERROR>EB-BCON.OFS.SRC.TYPE.MUST.BE.GLOBUS EB.ERROR>EB-BCON.PATH.NOT.PART.OF.ENV EB.ERROR>EB-BCON.REC.MISS.FILE EB.ERROR>EB-BCON.RELEASE.DATA.NOT.FOUND EB.ERROR>EB-BCON.UNABLE.TO.GET.ENV EB.ERROR>EB-BCON.CANT.REL.PGM.IN.BROWSER
GPACK 7
Installation Guide
EB.ERROR>EB-BCON.CANNOT.VERIFY.NEW.RECORD EB.ERROR>EB-BCON.FUNC.NOT.ALLWD.FOR.HELD.REC EB.ERROR>EB-BCON.PROGRAM.BP.INPUT.MISSING EB.ERROR>EB-BCON.DEL.OTHER.MULT.VALUES.FIRST VERSION>BUILD.CONTROL,SAVE VERSION>BUILD.CONTROL,PROGRAMS VERSION>BUILD.CONTROL,DL.DEFINE VERSION>BUILD.CONTROL,DICT VERSION>BUILD.CONTROL,LOCAL.REF VERSION>BUILD.CONTROL,NEW.SS VERSION>BUILD.CONTROL,RELEASE VERSION>BUILD.CONTROL,RESULTS VERSION>BUILD.CONTROL,FLAT.FILES VERSION>BUILD.CONTROL,MAIN VERSION>VERSION,RAD VERSION>BATCH,RAD VERSION>TSA.SERVICE,RAD VERSION>DE.TRANSLATION,RAD ENQUIRY>BUILD.CONTROL.RESULTS ENQUIRY>BUILD.CONTROL.PACKAGE ENQUIRY>BUILD.CONTROL.DL.DEFINE OFS.SOURCE>BUILD.CONTROL VERSION>BUILD.CONTROL,MAIN VERSION>BUILD.CONTROL,RELEASE.INSTR PGM.FILE>BUILD.CONTROL.PRODUCT PGM.FILE>BUILD.CONTROL.PARAMETER PGM.FILE>BUILD.CONTROL.SAVE.AUDIT PGM.FILE>BUILD.CONTROL.RELEASE.AUDIT FILE.CONTROL>BUILD.CONTROL.PRODUCT FILE.CONTROL>BUILD.CONTROL.SAVE.AUDIT FILE.CONTROL>BUILD.CONTROL.RELEASE.AUDIT FILE.CONTROL>BUILD.CONTROL.PARAMETER STANDARD.SELECTION>BUILD.CONTROL STANDARD.SELECTION>BUILD.CONTROL.PRODUCT STANDARD.SELECTION>BUILD.CONTROL.PARAMETER STANDARD.SELECTION>BUILD.CONTROL.SAVE.AUDIT STANDARD.SELECTION>BUILD.CONTROL.RELEASE.AUDIT EB.API>V.BCON.AUTO.UPDATE VERSION>BUILD.CONTROL.PARAMETER,MAIN
GPACK 8
Installation Guide
VERSION>BUILD.CONTROL.PARAMETER,RELEASE.DETAILS VERSION>BUILD.CONTROL.PARAMETER,PATH.DETAILS VERSION>BUILD.CONTROL.PARAMETER,AUTO.ID.DETAILS VERSION>BUILD.CONTROL.PARAMETER,PACK.DETAILS VERSION>BUILD.CONTROL.PRODUCT,MAIN VERSION>BUILD.CONTROL.PRODUCT,PACK.DETAILS VERSION>BUILD.CONTROL,CLOSE VERSION>BUILD.CONTROL,MAIN EB.ERROR>EB-BCON.FILE.NOT.DEF.IN.BCON.PROD EB.ERROR>EB-BCON.INP.SUFFIX EB.ERROR>EB-BCON.INP.FILE.NAME EB.ERROR>EB-BCON.MISSING.PROD EB.ERROR>EB-BCON.BP.NOT.DEF.IN.BCON.PARAM
GPACK 9
Installation Guide
4. Steps for Installing the Package
4.1 Pre-Installation steps
FTP the GR0800004lib.tar.gz to RUN directory in binary mode. Uncompress GR080004lib.tar.gz using the below command from the shell prompt of the FTP path. gunzip –c GR0800004lib.tar.gz | tar –xvf -
The above command will create a directory GR0800004lib under “bnk.run” which
contains all the object codes of BUILD.CONTROL.
Add the GR0800004lib in the JBCOBJECTLIST of the .profile as like below. JBCOBJECTLIST=$HOME/vdflib:$ HOME/GR0800004lib
Similarly uncompress the GR0800004Ins.tar.gz to RUN directory in binary mode.
Uncompress GR0800004Ins.tar.gz using the below command. gunzip –c GR0800004Ins.tar.gz | tar –xvf -
The above operation will create a directory RAD.BP under “bnk.run”.
Follow the Directory Creation step before installing the DL pack.
4.2 Installation steps for DL pack
If the package has been delivered as a DL Unit, then
FTP
the
TMNS000-BUILD.CONTROL.tar “../F.DL.DATA/DL.RESTORE” in binary mode.
the
directory
Uncompress TMNS000-BUILD.CONTROL.tar Now login to the T24 session session and open a new record SYSTEM in the table DL.PARAMETER. Entry the DL pack name TMNS000-BUILD.CONTROL in the field RESTORE.UNITS as shown below.
Commit and Verify (V) the same record.
Then Verify (V) the record TMNS000-BUILD.CONTROL in DL.DEINE table as shown below.
GPACK 10
to
Installation Guide
The above operation will create the data records in IHLD status.
Authorise the records manually which are in IHLD.
4.3 Directory Creations Create the below directories
Create a directory F.BCON.DATA under “../bnk” ../bnk” path using the below command. Jsh-> CREATE.FILE F.BCON.DATA TYPE=UD
Create two directories SAVE and RELEASE under “../bnk/F.BCON.DATA” path. Jsh-> CREATE.FILE SAVE TYPE=UD Jsh-> CREATE.FILE RELEASE TYPE=UD
Create two directories BCON.OFS.LOG and BCON.OFS.IN under directory Jsh-> CREATE.FILE BCON.OFS.LOG TYPE=UD Jsh-> CREATE.FILE BCON.OFS.IN TYPE=UD
GPACK 11
“../bnk.interface”
Installation Guide
4.4 Setting up Company Record: In company record, add ‘BUILD.CONTROL’ as a new multi value into the field PGM.AUTO.ID as shown below.
4.5 Creation of AUTO.ID.STA AUTO.ID.START RT Create the AUTO.ID.START record for BUILD.CONTROL as shown below.
Where, First line is ID.START is TODAY’s date in YYYYMMDD format
GPACK 12
Installation Guide
4.6 Setup the Build Control Parameter Record Setup the BUILD.CONTROL.PARAMETER table for all the applicable companies as shown below. The ID to this table is the COMPANY ID. Most of the fields are automatically defaulted once the ID for this record is entered. The user can however amend these fields based on the local requirements.
GPACK 13
Installation Guide
Note: While authorising the record, system will default the field auth priority. If any of the table
is not used, user can remove it from the list.
GPACK 14
