I sell all the items in the list of all my documents.Only US $ 150 For information you can send mail to: presiden.engineer@ gmail.com Price not including Shiping All document in Flash diskFull description
Descripción completa
bagaimana penamaan term symbolDeskripsi lengkap
libro sobre soldaduraFull description
symbolFull description
ArcheryFull description
sFull description
libro sobre soldadura
libro sobre soldadura
Welding DesignFull description
Norma europea EN 12390 Parte 8 profundidad de penetración del agua bajo presión en concreto endurecidoFull description
BS EN 81.41.2010Full description
BS EN 10079Full description
256247693-BS-EN-10034Full description
Full description
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable m…Full description
BS EN 50129Full description
TWI Welding Inspection BS EN 22553
Course Reference WIS 5 M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
Reference lines Arrow line
Other side
Arrow side
Arrow side
Other side
M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
Other side
Both sides
Arrow side M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
a
b
c
d
M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
Flat
Convex
Concave
Toes shall be blended
M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
Field weld (site weld)
NDT
The component requires
NDT inspection
Welding to be carried out all round component (peripheral weld)
WPS
Additional information, the reference document is included in the box M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
a = Design throat thickness z = Leg length a = 0.7 of z
a4 z
a
4mm throat
b6 6mm leg M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
n x l (e)
n l (e)
= number of weld elements = length of each weld element = distance between each weld element Welds to be staggered
3 x 10 (20) 2 x 10 (20)
111 Process
M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553) MR M
Single-V Butt with permanent backing strip
Single-U Butt with removable backing strip
Single-V Butt flush cap
Single-U Butt with sealing run M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
Single-bevel butt
Double-bevel butt
Single-bevel butt
Single-J butt M.S.Rogers
TWI
BS EN 22553. Welding Symbols (ISO 2553)
10
10
Partial penetration single-V butt
M.S.Rogers
TWI
Ans to BS EN 22553 Fillet Welds ex: 1 6
1. Welded arrow side: A continuous fillet weld
with a 6 mm leg length , toes to be blended smoothly.
2. Welded both sides: Three intermittent fillet welds with 6 mm leg lengths, the length of each weld 25 mm and the distance between each weld 40 mm.
25
3. Welded arrow sides: Three intermittent fillet welds with 10 mm leg lengths, the length of each weld 40 mm, the distance between each weld 30mm. Welded other side: Three intermittent fillet welds 6 mm leg lengths, the length of each weld 50mm and the distance between each weld 25mm, welds to be staggered. 4. Welded arrow side: Three intermittent fillet welds with 8 mm leg lengths, the length of each weld 25 mm and the distance between each weld 50 mm. Welded other side: Two intermittent fillet welds with 10 mm leg lengths, the length of each weld 20 mm and the distance between each weld 40mm, welds to be staggered.
3 x 25 (40)
6 6 25
40
25
25
40
25
40
25
40
3 x 25 (40)
10 6 30
50
25
40
40
25
50
20
30
50
25
40
40
30
25
50
50
3 x 40 (30) 3 x 50 (25)
40
8
3 x 25 (50)
10
2 x 20 (40)
25
20
M.S.Rogers
TWI
Ans to BS EN 22553 Butt Welds ex: 1 M
1. Welded arrow side: Single „V‟ butt weld with permanent backing strip, flat weld profile.
2. Welded other side: Single “U” butt weld, flat weld profile
10
3. Welded arrow side: Single “V” butt weld depth of preparation 10 mm Welded other side: Backing run. (Plate thickness 15 mm.) 12 12
4. Welded arrow side: Single “J” butt weld, depth of preparation 12 mm with a 8 mm fillet weld superimposed. (plate thickness 15 mm. Welded other side: 12 mm leg length fillet weld.
