I sell all the items in the list of all my documents.Only US $ 150 For information you can send mail to: presiden.engineer@ gmail.com Price not including Shiping All document in Flash diskFull description
Norma europea EN 12390 Parte 8 profundidad de penetración del agua bajo presión en concreto endurecidoFull description
BS EN 81.41.2010Full description
BS EN 10079Full description
256247693-BS-EN-10034Full description
Full description
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable m…Full description
BS EN 50129Full description
Portable fire extinguishers
Full description
Industrial Valves - Metallic butterfly valves This standard specifies requirements for butterfly valves having metallic bodies for use in flanged or butt welding piping systems and used for isolat...
En standardFull description
BS EN 806Full description
Descripción completa
BS-en-12101-5Full description
Full description
British standard EN 445Descripción completa
IEC 622267Descripción completa
bs en 196 part 1 isFull description
C steel
wewe
BS ENFull description
BS EN ISO 9431Full description
I S B ) c ( , y p o C d e l l o r t n o c n U , 4 0 : 8 1 8 0 0 2 / 6 0 / 0 1 , m a h g n i m r i B f o y t i s r e v i n U , s n e h t A t r e b l i G : y p o C d e s n e c i L
EN 12080:2007 (E)
Table 1 — Inspection plan Nature of inspections
Number of inspections to be performed for a batch of N components or bearings N ≤10
If a component or a bearing is found to be faulty: — whole batch shall be rejected, if inspection by sampling; — faulty component or rolling bearing shall be rejected, in case of 100 % inspection. a
In accordance with 4.4.
b
On outer and inner rings, on rolling elements and on loose ribs and thrust collars.
c
On outer and inner rings.
d
Radial clearance for cylindrical and spherical roller bearings; axial clearance for cartridge bearings and matched pairs of tapered roller bearings.
e
Except case-hardened rings and bainite hardened rings.
12.2 Sampling A sample consists of rolling bearings or components tak en from one batch and selected at random. When the heat treatment is continuous, the sampling plan shall be agreed and documented in accordance with 4.4. If the sampling is made by the customer, samples are taken at random from each batch of the rolling bearings chosen by the customer for inspection. For the checking of hardness and case depth of rings, one or more sectioned parts of rings from the same furnace batch may be used. Alternative samples may be used after agreement with the customer.
13 Quality records Independent of other regulations, the requirements for the archiving of all records of control of quality, providing proof of product conformity to this European Standard, and to the special terms of the order, shall be defined by the customer and documented in accordance with 4.2.
