Product Description APPLICATION It is mainly used for plasticizing and mixing rubber and plastic.
Type Mix chamber total volume Mix chamber net volume Rear rotor speed Rotor speed ratio Compressed air pressure Compressed air consumption Main motor power Main motor speed Overall dimension(L×W×H) Weight(except electric system) Discharge and locking device features Mixing chamber features Type Mix chamber total volume Mix chamber net volume Rear rotor speed Rotor speed ratio Compressed air pressure Compressed air consumption Main motor power Main motor speed Overall dimension(L×W×H) Weight(except electric system) Discharge and locking device features Mixing chamber features Type Mix chamber total volume Mix chamber net volume Rear rotor speed Rotor speed ratio Compressed air pressure
Unit L L r/min
X(S)M-80×40A X(S)M-80×(6-60) 80 (two wings) 76 (four wings) 60 (fill factor:0.75) 57 (fill factor:0.75) 40 6-60 1 : 1.15 1 : 1.15 Mpa 0.6-0.8 0.6-0.8 m³/h 35 35 kW 210(AC) 355(DC) r/min 743 1000 mm 6965×2760×4500 7150×3100×4500 t 24 24 Drop type discharge,locking by latch or toggle type Mixing chamber is drilled for heating or cooling Unit L L r/min
X(S)M-110×40 X(S)M-110×(6-60) 110 (two wings) 110 (two wings) 82.5 (fill factor:0.75) 82.5 (fill factor:0.75) 40 6-60 1 : 1.15 1 : 1.15 Mpa 0.6-0.8 0.6-0.8 m³/h 60 60 kW 240(AC) 450(DC) r/min 985 1000 mm 6987×2640×4392 6807×2640×4392 t 23 23 Drop type discharge,locking by latch or toggle type Mixing chamber is drilled for heating or cooling Unit L
Compressed air consumption Main motor power Main motor speed Main motor voltage Overall dimension(L×W×H) Weight(except electric system) Discharging type Locking device Cooling type of mixing chamber
m³/h kW r/min V mm t
70 355 740 6000(AC) 8000×3250×5180 37 Drop door discharging Toggle lock
70 500 1000 440(DC) 8000×3330×5260 39 Drop door discharging Toggle lock
Drilling holes cooling
Drilling holes cooling
Product Description Application: It is coupled with banbury mixer, rubber roll-head extruder or rubber sheeting mill. The plasticated stock, masterbatch and final stock from the banbury mixer are calendered into sheet via the rubber roll-head extruder or rubber sheeting mill. The sheet is dipped, cooled and dried, then continuously swing and piled up in the batch-off cooler.
XPG-900 batch-off cooler Max. width of rubber sheet Thickness of rubber sheet Max. pendant length of hanging sheet Swing sheet length Converying speed Numbers of cooling fans Distance between the hanging bars Rubber outlet temperature Length of the whole machine Width of the whole machine Max. output Supper scope: 1) Take-off device 2) Dipping device 3) Lifting device 4) Fan cooled device 5) Grabbing device 6) Down swing device 7) Air control device
750±50mm 5-12mm 1400mm 1-1.3m 0-40m/min 16sets 152.4m room temperature +5ºC 13.5m 1.8m about 2500kg/h
