As shown in the illustration, place a straight edge on on the transaxle case and measure the distance between the 2nd coast & O/D brake flange and straight edge using vernier calipers. (Dimension A)
As shown in the illustration, place a straight edge on on the O/D brake piston and measure the distance between the transaxle rear cover and straight edge using vernier calipers. (Dimension B) Calculate the piston stroke value using the following formula. Select a flange which satisfies the piston stroke value and install it. Piston stroke = Dimension A - Dimension B Piston stroke: 0.65 - 1.05 mm (0.0256” - 0.0413”)
O.D. / 2nd Coast Brake Clutch Clearance 6
A Division of Freudenberg-NOK
F1 ONE-WAY CLUTCH ROTATION
CHECK VALVE LOCATION
Freely Hold
Turn Lock
ANTI-RATTLE ANTI-RA TTLE CLIP ROTA ROTATION
INPUT SHAFT END PLA PLAY Y
Using a dial indicator indicator,, measure the input shaft end play End play: 0.3 - 0.9 mm (0.012" - 0.035")
