ASNT SNT-TC-1A

 Recommended Practice No. SNT-TC-1A SNT-TC-1A 2001

Text Corrections __________________________________________________________________________________  Recommended  The three text corrections below apply to the first printing of the 2001 edition of  Recommended  Practice No. SNT-TC-1A . Subsequent printings of the document will incorporate the corrections into the published text.

Page 3: The paragraph following 6.3.3.3 is corrected to include Level II near the end of the sentence. The above Level III requirements may be partially replaced by experience as a certified NDT Level II or by assignments at least comparable to NDT Level II as defined in the employer’s written practice.

Page 7: The second and third lines of 8.8.3.2 are corrected to include ACCP Professional Level III. 8.8

NDT Level III III Examina ination tionss 8.8.3 8.8.3 Specif Specific ic Exam Examin inati ation on (for (for each each metho method). d). 8.8.3.2 8.8.3.2 The employ employer er may delete delete the the specific specific examina examination tion if the the candidate has a valid ASNT NDT Level III or ACCP Professional Level III certificate in the method and if  documented evidence of experience exists, including the preparation of NDT procedures to codes, standards, or specifications and the evaluation of test results.

Page 10: The entry for Ultrasonics Level II Minimum Required Work Experience is corrected to read 630. Table 6.3.1 A Recommended Initial Training and Experience Levels

Examination Method Ultrasonics

Lev Level

Tec Techniqu ique

High School graduate or equivalent

Completion with a passing grade of at leas l eastt 2 years of  engineering or science study at a university colleg coll ege e or technical school

Minimum Required Work  Experience in Method Method (Hours)

Permitted Time Frame Fr ame (to obtain required work  experience in method) (Months)

I

40

30

21 0

1 . 5-9

II

40

40

63 0

4 . 5-27

Catalog #2065 August 2001