Asme Sec Viii-1 Interp

ASME Boiler and Pressure Vessel Code SECTION VIII-1

INTERPRETATIONS Volume 60 Interpretations of the Code are posted in January and July at www.cstools.asme.org/interpretations. Interpretations of Section III, Divisions 1 and 2, are part of the update service to Section III, Subsection NCA. Interpretations Volumes 57 through 59 were included with the update service to the 2007 Edition of the Code; Volume 60 is the first Interpretations volume to be included with the update service to the 2010 Edition. Section

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

I II-A II-B II-C II-D (Customary) II-D (Metric) III-NCA III-3 IV V VI VII VIII-1 VIII-2 VIII-3 IX X XI XII

Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Vol. 60

Vol. 61

7 / 10 7 / 10 ... ... ... ... 7 / 10 ... 7 / 10 ... ... ... 7 / 10 7 / 10 ... 7 / 10 7 / 10 7 / 10 7 / 10

Licensee=Parsons Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -

Copyright © 2010 THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved



` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -

Copyright © 2010 THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved



INTERPRETATIONS VOLUME 60 — SECTION VIII-1 Replies to Technical Inquiries January 1, 2009 Through December 31, 2009

FOREWORD General Information

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

This publication includes all written interpretations issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee in response to inquiries concerning interpretations of the ASME Boiler and Pressure Vessel Code. A contents is also included which lists subjects specific to the interpretations covered in the individual volume. These interpretat interpretations ions are taken verbatim verbatim from the original letters, except for a few typographical typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised interpretation is presented bearing the original interpretation number with the suffix R and the original file number with an asterisk. Following these revised interpretations, new interpretations and revisions to them issued during the indicated dates are assigned interpretation numbers in chronological order. Interpretations applying to more than one Code Section appear with the interpretations for each affected Section. ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee. As stated in the Statement of Policy Policy in the Code Code docume documents nts,, ASME ASME does does not “appro “approve, ve,”” “certi “certify, fy,”” “rate, “rate,”” or “endor “endorse” se” any item, construction, proprietary device, or activity. An interp interpret retati ation on applie appliess either either to the Edition Edition and Addenda Addenda in effect effect on the date of issuan issuance ce of the interpretation or the Edition and Addenda stated in the interpretation. Subsequent revisions to the Code may supersede the interpretation. For detailed instructions on preparation of technical inquiries to the ASME Boiler and Pressure Vessel Committee, refer to Appendix 16.

Subject and Numerical Indexes Subject and numerical indexes have been prepared to assist the user in locating interpretations by subject matter or by location in the Code. They cover interpretations issued from Volume 12 up to and including the present volume and will be updated with each volume.

947 Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


SECTION VIII-1 Subject

Interpretation

File No.

Append Appendix ix 1-5(e 1-5(e), ), Appen Appendix dix 1-8, 1-8, and and UG-3 UG-33, 3, Coni Conical cal Secti Section ons. s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1VIII-1-1010-06 06

08-15 08-1546 46

Applicability of UT Acceptance-Rejection Criteria of Appendix 12, Para. 12-3 When Apply Applying ing UT in in Lieu Lieu of RT in in Accord Accordanc ancee With With Code Code Case Case 223 2235 5 . . . . . . . . . . . . . . . . . . . . . . . VIII VIII-1-1-1010-02 02

09-57 09-577 7

Code Code Case Case 2235 2235-9 -9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII VIII-1 -1-0 -077-68 68

08-1 08-126 260 0


08-1 08-125 259 9


09-8 09-808 08

Figure Figure UW-13 UW-13.1, .1, Dish Dished ed Interm Intermedi ediate ate Head. Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1 VIII-1-0 -07-6 7-66 6

08-13 08-1396 96

Introd Introduct uctio ion, n, U-1(c U-1(c)(2 )(2)(f )(f), ), Press Pressuri urized zed Air Air in a Vess Vessel el Cont Contain aining ing Wate Waterr . . . . . . . . . . . . . . . . . . . . VIIIVIII-1-1 1-10-1 0-11 1

09-771 09-771

Nonma Nonmanda ndator tory y Append Appendix ix G, G-2. G-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1-1 VIII-1-10-0 0-04 4

09-607 09-607

Part Part UHX UHX and and UHX-1 UHX-13, 3, Shel Shell-a l-andnd-Tub Tubee Heat Heat Excha Exchange ngers rs With With Coni Conical cal Sect Sectio ions ns . . . . . . . . . . . . . VIII-1 VIII-1-10 -10-1 -10 0

09-586 09-586

Part Part UHX, UHX, Stress Stress Crit Criteri eriaa for Press Pressure ure Test Test Condi Conditio tion n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1 VIII-1-10 -10-1 -12 2

09-594 09-594

SA-1 SA-182 82 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIIIVIII-11-10 10-0 -01 1

08-6 08-617 17

Thickn Thickness ess of of Heat Heat Transf Transfer er Plate Platess in Plate Plate-Ty -Type pe Heat Heat Excha Exchange ngers. rs. . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1VIII-1-07 07-73 -73

08-948 08-948

U-1(e)(3) and UG-120(e), Requirements for Elliptical Manway and Handh Handhole ole Bolt Bolting ing Mate Materia rials ls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1-0 VIII-1-07-6 7-67 7

08-139 08-1399 9

U-2(g), UW-20, Part UHX, UHX-11.5, UHX-15, and Appendix A, Tube Expansion Depth Depth Ratio Ratio and and Tube Joint Joint Load Loadss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1-0 VIII-1-07-7 7-71 1

08-128 08-1286 6

UG-34 UG-34 and and UG-39, UG-39, Blind Blind Flang Flangee Thickn Thickness. ess. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1-0 VIII-1-07-6 7-69 9

08-156 08-1562 2

UG-3 UG-37 7 and UGUG-40 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII VIII-1 -1-0 -077-70 70

08-1 08-172 725 5

UG-99 UG-99(a) (a)(1) (1) and and UW-33( UW-33(a) a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1-1 VIII-1-10-0 0-09 9

08-176 08-1762 2

UHX-19.2.2 and UHX-19.3, Caution Marking and Manufacturer’s Data Report Inform Informati ation on for for Fixed Fixed Tubesh Tubesheet eet Heat Heat Excha Exchange ngers rs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1VIII-1-10 10-08 -08

09-71 09-719 9

UW-16( UW-16(b) b) and Fig. Fig. UW-16 UW-16.1 .1 sketch sketch (g) (g) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1 VIII-1-10 -10-07 -07

09-104 09-1043 3

UW-16( UW-16(f)( f)(3)( 3)(a)( a)(3) 3)(a) (a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIII-1VIII-1-1010-03 03

09-63 09-637 7



` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -

SECTION VIII, DIVISION 1 — INTERPRETATIONS VOL. 60

Interpretation: VIII-1-07-66 Subject: Figure UW-13.1, Dished Intermediate Head Date Issued: October 20, 2008 File: 08-1396 Question: Does Section VIII, Division 1 provide any details or requirements for attaching a spherically dished dished intermed intermediat iatee head head to the inside of a cylind cylindric rical al shell shell using using a weld weld throug through h the thickness thickness of the intermediate head? Reply: No, see U-2(g). Note: This interpretation was inadvertently omitted from Vol. 59 of the interpretations.

Interpretation: VIII-1-07-67 Subject: U-1(e)(3) and UG-120(e), Requirements for Elliptical Manway and Handhole Bolting Materials Date Issued: October 29, 2008 File: 08-1399 Question: U-1(e)(3) includes pressure retaining covers of manways, handholes, and their attaching bolting and nuts within the scope of the Code, and UG-120(e) requires that pressure retaining covers and their attaching bolting and nuts be recorded on the manufacturer’s data report. Some manways and handholes are designed such that the cover fits on the inside surface of the vessel and the seal/gasket is compressed by the internal pressure acting on the cover. The yoke and bolts associated with such designs are not required to resist any pressure loads and are only used to hold and position the pressure retaining cover until pressure is applied. As these yokes, bolts, and nuts are not pressure retaining components, are they required to be of Code materials and listed on the manufacturer’s data report? Reply: No. Note: This interpretation was inadvertently omitted from Vol. 59 of the interpretations.

Interpretation: VIII-1-07-68 Subject: Code Case 2235-9 Date Issued: January 5, 2009 File: 08-1260 Questio Question n (1): (1): Does Does Code Code Case Case 2235-9requi 2235-9require re an ultraso ultrasonic nic examina examinatio tion n plan plan capabl capablee of detect detecting ing indica indicatio tions ns transverse as well as parallel to the weld centerline? Reply (1): Yes. Question (2): Are the acceptance criteria specified in Tables 1, 2, and 3 of Code Case 2235-9 applicable to indications oriented transverse as well as parallel to the weld centerline? Reply (2): Yes. Per para. (c), the ultrasonic examination shall be performed in accordance with a written procedure conforming to the requirements of Section V, Article 4. T-472 of Section V, Article 4 identifies examination requirements when using the Distance Amplitude Technique, such as Linear Phased Array ultrasonics, and T-474 covers Non-Distance Amplitude Techniques. From T-472, weld joints shall be scanned with an angle beam search unit in both parallel and transverse directions (four scans) to the weld axis. Note: This interpretation also appears as VIII-2-07-11. 949 Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Interpretation: VIII-1-07-69 Subject: UG-34 and UG-39, Blind Flange Thickness Date Issued: January 5, 2009 File: 08-1562 Question: If an opening in a blind flange is greater than that allowed by provisions of ASME B16.5, is it required to use UG-34(c)(2) and UG-39 to determine the required thickness and reinforcement in lieu of the dimensions and pressure ratings that are given in B16.5? Reply: Yes.

Interpretation: VIII-1-07-70 Subject: UG-37 and UG-40 Date Issued: January 5, 2009 File: 08-1725 Question (1): UG-37(a) allows nozzle reinforcement calculations to be based on the required thickness of a sphere when the nozzle and all of its reinforcement are included within the spherical part of an F&D head or within 80% of the diameter of an elliptical head. When the limits of reinforcement of UG-40 extend beyond the spherical part of an F&D head or beyond 80% of the ellipsoidal head diameter, is it acceptable to use the required thickness of the sphere if only that material within the spherical part of an F&D head or within 80% of the diameter of an ellipsoidal head is considered as reinforcement? Reply (1): Yes. Question (2): In the definition of “t ” in UG-37(a), does the phrase “not including forming allowances” mean that any additional thickness added as a forming allowance shall not be considered in determining the value of “t ”? Reply (2): Yes.


--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---

Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT


Interpretation: VIII-1-07-71 Subject: U-2(g), UW-20, Part UHX, UHX-11.5, UHX-15, and Appendix A, Tube Expansion Depth Ratio and Tube Joint Loads Date Issued: January 30, 2009 File: 08-1286 Question (1): In accordance with the rules given in UHX-11.5.1(a), shall the tube expansion depth ratio ( ) be equal to zero when the tubes are not expanded to the tubesheet (e.g., welded only)? Reply (1): Yes. Question (2): Does Part UHX have rules for calculating the tube-to-tubesheet joint load? Reply (2): No, see U-2(g). Note: File 05-484 is open to develop rules to calculate the tube-to-tubesheet joint load. Question (3): For tube-to-tubesheet strength welds (full or partial) defined in UW-20, do UW-20 and UHX-15 require that the tube-to-tubesheet joint load be determined and compared with the maximum allowable load in either direction on the tube-to-tubesheet joint ( Lmax) whether or not the Code has rules for determining the tube-to-tubesheet joint load? Reply (3): Yes. Question (4): For tube-to-tubesheet joints that do not meet UW-20, does the Code have mandatory rules for determining the tube joint load and the tube joint strength of tube-to-tubesheet joints in shell-and-tube heat exchangers that meet the requirements of Part UHX? Reply (4): No, see U-2(g), UHX-15, and Nonmandatory Appendix A.

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -




Interpretation: VIII-1-07-72 Subject: Code Case 2235-9 Date Issued: February 10, 2009 File: 08-1259 Question (1): Per Code Case 2235-9, para. (c), may a side drilled hole be used to represent a flaw for qualification purposes? Reply (1): No. Question (2): Per Code Case 2235-9, para. (c), may a notch that has been machined by conventional methods on the end of a block and left open (i.e., not totally embedded so that the UT procedure cannot demonstrate detection of both ends) be used to represent a flaw for qualification purposes? Reply (2): No. Question (3): Per Code Case 2235-9, para. (c), may electric discharged machined (EDM) notches be used to represent embedded or surface flaws for qualification purposes? Reply (3): Yes. Question (4): Per Code Case 2235-9, para. (c), for a production weld with a 60 deg included angle (e.g., 30 deg bevel angle) joint detail, must the plane of the flaws in the qualification block be oriented at a 30 deg angle to the block’s surface and parallel to the fusion line? Reply (4): No. Note: This interpretation also appears as VIII-2-07-12.

Interpretation: VIII-1-07-73 Subject: Thickness of Heat Transfer Plates in Plate-Type Heat Exchangers ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

Date Issued: March 2, 2009 File: 08-948 Question: Does Section VIII, Division 1 contain design rules that may be used to establish the minimum required thickness or MAWP of the heat transfer plates in plate-type heat exchangers? Reply: No, see U-2(g).

Interpretation: VIII-1-10-01 Subject: SA-182 Date Issued: August 7, 2009 File: 08-617 Question: Does Section VIII, Division 1 prohibit the use of SA-182 to fabricate a tubesheet in a heat exchanger? Reply: No. 952 Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS



Interpretation: VIII-1-10-02 Subject: Applicability of UT Acceptance-Rejection Criteria of Appendix 12, Para. 12-3 When Applying UT in Lieu of RT in Accordance With Code Case 2235 Date Issued: August 7, 2009 File: 09-577 Question: During construction, when applying ultrasonic examination in lieu of radiography per Code Case 2235, is it required to meet the acceptance-rejection standards of para. 12-3? Reply: No.

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

Interpretation: VIII-1-10-03 Subject: UW-16(f)(3)(a)(3)(a) Date Issued: August 7, 2009 File: 09-637 Question: A standard NPS 11 ⁄ 2 coupling with an outside diameter of 21 ⁄ 2 in. is attached to a vessel wall using a single fillet weld in accordance with UW-16(f)(3)(a). Shall the minimum weld throat thickness required by UW-16(f)(3)(a)(3)(a) be based on an NPS 1 1 ⁄ 2 pipe when doing the UG-45(a) and (b) evaluation? Reply: Yes.

Interpretation: VIII-1-10-04 Subject: Nonmandatory Appendix G, G-2 Date Issued: August 26, 2009 File: 09-607 Question: Nonmandatory Appendix G makes reference to several documents that may be used as guidance in the design of vessel supports and attachments. When a Manufacturer uses one of these referenced documents, such as the Manual for Steel Construction, do all the requirements of that document then become a mandatory Code requirement? Reply: No.

Interpretation: VIII-1-10-05 Subject: Code Case 2235-9 Date Issued: September 1, 2009 File: 09-808 Question: In order to meet the flaw acceptance criteria of Table 1, shall both the limits on a/t and l be satisfied, e.g., for a subsurface flaw, a/t is limited to 0.143 regardless of l , and l is limited to 0.25 in. (6.4 mm) regardless of a/t ? Reply: Yes. Both criteria must be met. 953 Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS



Interpretation: VIII-1-10-06 Subject: Appendix 1-5(e), Appendix 1-8, and UG-33, Conical Sections Date Issued: September 10, 2009 File: 08-1546 Question (1): A cone-to-cylinder transition under internal pressure is made with a knuckle (flare) at the small end of the cone. Is it required to perform reinforcement calculations in accordance with Appendix 1-5? Reply (1): No. Question (2): Does Section VIII, Division 1 provide rules for determining the required thickness for internal pressure of a knuckle at the small end of a cone-to-cylinder junction? Reply (2): No, see U-2(g). Question (3): In accordance with the provisions of UG-33, if a cone-to-cylinder junction (without a knuckle) is not considered to be a line of support, must the reinforcement requirements of Appendix 1-8 be satisfied? Reply (3): Yes. Question (4): In accordance with the provisions of UG-33, if a cone-to-cylinder junction is considered to be a line of support, must both the reinforcement (if there is not a knuckle) and moment of inertia requirements of Appendix 1-8 be satisfied? Reply (4): Yes.

Interpretation: VIII-1-10-07 Subject: UW-16(b) and Fig. UW-16.1 sketch (g) Date Issued: October 15, 2009 File: 09-1043 Question: A nozzle that is similar to Fig. UW-16.1 sketch (g) is attached such that the nozzle forging has an internal projection at some locations around the opening. For those sections of the nozzle with an internal projection, is it required to maintain the r 1 dimension at the outside diameter of the nozzle forging? Reply: No.

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -




Interpretation: VIII-1-10-08 Subject: UHX-19.2.2 and UHX-19.3, Caution Marking and Manufacturer’s Data Report Information for Fixed Tubesheet Heat Exchangers Date Issued: October 30, 2009 File: 09-719 Question (1): Does UHX-19.2.2 require that nameplates used for the caution marking meet the requirements of UG-119 with respect to nameplate thickness, height of characters, and indentation depth or raised height of characters? Reply (1): No. Question (2): Does UHX-19.2.2 require that the operating temperatures used to determine the mean metal temperatures and axial differential thermal expansion for Loading Cases 4 through 7 [UHX-13.4(a)(4) through UHX-13.4(a)(7)] be included in the caution marking? Reply (2): No. Question (3): Does UHX-19.3 require that the operating temperatures used to determine the mean metal temperatures and axial differential thermal expansion for Loading Cases 4 through 7 [UHX-13.4(a)(4) through UHX-13.4(a)(7)] be indicated on the Manufacturer’s Data Report? Reply (3): No. Question (4): Does UHX-19.2.2 require that the mean metal temperatures used to determine the axial differential thermal expansion for Loading Cases 4 through 7 [UHX-13.4(a)(4) through UHX-13.4(a)(7)] be included in the caution marking? Reply (4): No. Question (5): Does UHX-19.3 require that the mean metal temperatures used to determine the axial differential thermal expansion for Loading Cases 4 through 7 [UHX-13.4(a)(4) through UHX-13.4(a)(7)] be indicated on the Manufacturer’s Data Report? Reply (5): No.

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -

Interpretation: VIII-1-10-09 Subject: UG-99(a)(1) and UW-33(a) Date Issued: November 6, 2009 File: 08-1762 Question (1): Is it permitted by the rules of UG-99(a)(1) to remove weld reinforcement meeting the requirements of UG-35(d) by grinding following hydrostatic pressure testing and prior to the AI signing the Manufacturer’s Data Report? Reply (1): Yes. Question (2): Is it required to measure the maximum offset of a butt weld joint after the completion of the welding process in order to determine whether the UW-33 alignment tolerance is met? Reply (2): Yes. 955 Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS



Interpretation: VIII-1-10-10 Subject: Part UHX and UHX-13, Shell-and-Tube Heat Exchangers With Conical Sections Date Issued: November 6, 2009 File: 09-586 Question (1): Do the rules provided in UHX-13 consider shell-and-tube heat exchangers having shells that contain conical sections? Reply (1): No, see U-2(g). Question (2): Do the rules provided in Part UHX for the design tubesheets for shell-and-tube heat exchangers with integral channels or shells consider conical sections that are closer to the tubesheet than 1.8  Dt , where D is the diameter and t is the thickness of the applicable integral section adjacent to the tubesheet? Reply (2): No, see U-2(g). Note: Record 07-218 is open to develop rules for fixed tubesheet heat exchangers to account for the stiffness of shells containing conical shell sections.

Interpretation: VIII-1-10-11 Subject: Introduction, U-1(c)(2)(f), Pressurized Air in a Vessel Containing Water Date Issued: November 6, 2009 File: 09-771 Question: Paragraph U-1(c)(2)(f) recognizes that a vessel may be designed with a constant mass of air that serves as a cushion of pressurized air. When water enters the pressure vessel, the air pressure so created is directly related to the increase in water volume and the associated decrease in air volume in the vessel. Is a pressure vessel containing water with a design pressure of less than 300 psi (2 MPa) and a design temperature of less than 210°F (99°C) and is designed to be pressurized by air from an external source a class of vessel that is not included in the Scope of ASME Section VIII, Division 1 per U-1(c)(2)(f)? Reply: No.

Interpretation: VIII-1-10-12 Subject: Part UHX, Stress Criteria for Pressure Test Condition Date Issued: November 25, 2009 File: 09-594 Question (1): Does Section VIII, Division 1 require that calculations for the pressure test condition of shell-and-tube heat exchangers be performed using the applicable calculation procedure given in Part UHX with the test pressure conditions substituted for the design pressure conditions? Reply (1): No. Question (2): If the pressure test condition calculations described by Question (1) are performed on shelland-heat exchangers designed in accordance with Part UHX, does Section VIII, Division 1 provide rules to determine the allowable stress criteria for such calculations? Reply (2): No. --`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


956 Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

SECTION VIII-1 — CUMULATIVE INDEX — INTERPRETATIONS VOLS. 12–60

NUMERICAL INDEX

Location Mandatory Appendices Appendix 1

Appendix 1, 1-2(a)(1) Appendix 1, 1-4

Appendix 1, 1-4(d) Appendix 1, 1-4(f)(1)(e) Appendix 1, 1-5

Appendix 1, 1-5(e) Appendix 1, 1-6 Appendix 1, Fig. 1-6 Fig. 1-6(d) Appendix 1, 1-7

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

Appendix 1, 1-7(b) Fig. 1-7-1 Fig. 1-7-2 Appendix 1, 1-8

Appendix 2

Interpretation

VIII-1-83-179 VIII-1-83-236 VIII-1-89-139 VIII-1-01-153 VIII-1-89-131 VIII-1-83-285 VIII-1-86-49 VIII-1-89-175 VIII-1-01-155 VIII-1-86-77 VIII-1-04-25 VIII-1-83-131 VIII-1-83-139 VIII-1-83-153 VIII-1-83-321 VIII-1-89-256 VIII-1-92-55 VIII-1-10-06 VIII-1-86-03 VIII-1-89-56 VIII-1-83-172 VIII-1-95-07 VIII-1-95-58 VIII-1-83-98 VIII-1-01-08 VIII-1-01-32 VIII-1-01-66 VIII-1-01-159 VIII-1-95-152 VIII-1-98-83 VIII-1-01-66 VIII-1-01-66 VIII-1-83-131 VIII-1-83-283 VIII-1-86-158 VIII-1-92-55 VIII-1-98-82 VIII-1-98-104 VIII-1-10-06 VIII-1-83-39 VIII-1-83-43 VIII-1-83-235 VIII-1-83-242 VIII-1-83-297 VIII-1-83-303 VIII-1-83-340 VIII-1-83-356 VIII-1-86-117 VIII-1-86-150 VIII-1-86-173 VIII-1-89-11

File No.

BC83-306 BC83-597 BC89-218 BC03-516 BC89-151 BC84-141 BC86-069 BC90-023 BC03-619 BC86-254 BC04-156 BC82-209 BC83-132 BC83-169 BC84-381 BC90-688 BC91-453 08-1546 BC85-223 BC88-395 BC83-256 BC94-191 BC95-042 BC82-807 BC00-564 BC01-079 BC01-335 02-4037 BC96-527 BC99-370 BC01-335 BC01-335 BC82-209 BC84-139 BC87-191 BC91-453 BC98-172a BC98-175 08-1546 BC82-398 BC82-508 BC83-590 BC83-604 BC82-122 BC83-359 BC84-656 BC85-074 BC87-006 BC86-194 BC86-247 BC87-198

Page No.

Location

101 134 412 869 409 157 239 430 870 255 883 73 77 90 182 467 533 954 214 368 98 626 652 57 792 806 818 926 708 765 818 818 73 156 301 533 765 779 954 25 26 133 136 171 174 196 203 278 297 306 347

Mandatory Appendices (Cont’d) Appendix 2 (Cont’d) VIII-1-89-35 VIII-1-89-146 VIII-1-92-37 VIII-1-89-323 VIII-1-92-220 VIII-1-95-38 VIII-1-95-73 VIII-1-01-20 VIII-1-01-22 VIII-1-01-45 VIII-1-01-78 VIII-1-01-116 VIII-1-07-07 Appendix 2, 2-1(b) VIII-1-04-08 Appendix 2, 2-1(e) VIII-1-98-26 Appendix 2, 2-1(e)(2) VIII-1-92-128 Appendix 2, 2-2 VIII-1-83-91 Appendix 2, 2-2(b) VIII-1-01-114 Appendix 2, 2-2(d) VIII-1-86-95 VIII-1-86-171 VIII-1-89-185 VIII-1-95-98 Appendix 2, 2-2(d)(1) VIII-1-07-17 Appendix 2, 2-3 VIII-1-83-96 VIII-1-86-216 VIII-1-07-12 Appendix 2, 2-4 VIII-1-89-200 VIII-1-89-200R VIII-1-01-38 Appendix 2, 2-4(a)(1) VIII-1-86-54 VIII-1-98-72 VIII-1-07-59 Appendix 2, 2-5 VIII-1-01-59 VIII-1-01-136 Appendix 2, 2-4(a)(3) VIII-1-83-25 Appendix 2, 2-7(b) VIII-1-92-57 Appendix 2, 2-9 VIII-1-92-121 VIII-1-95-72 Appendix 2, 2-9 and VIII-1-07-34 2-11 Appendix 2, Fig. 2-4 VIII-1-83-21 VIII-1-83-31 VIII-1-83-115 VIII-1-86-25 VIII-1-86-69 VIII-1-86-70 VIII-1-86-25R VIII-1-86-138 VIII-1-86-150 VIII-1-89-24

Interpretation

File No.

BC88-250 BC89-251 BC91-600 BC90-192 BC94-109 BC94-366 BC95-313 BC00-696 BC00-703 BC01-303 BC01-407 BC01-912 BC06-1047 BC03-1347 BC97-508A BC92-383 BC82-738 BC01-606 BC86-267 BC85-177 BC90-243 BC95-471 01-648 BC82-801 BC88-028 BC06-1122 BC90-325 BC90-325* BC01-121 BC86-113 BC99-297 08-1302 BC01-296 BC01-329 BC82-301 BC92-053 BC92-299 BC95-312 03-1834

359 415 520 569 616 645 663 801 801 810 827 847 918 874 730 572 54 846 262 306 434 678 928 56 330 920 439 440 808 241 756 944 815 862 17 534 570 662 933

BC82-274 BC82-196 BC81-514 BC85-464 BC85-228 BC85-230 BC86-464* BC87-120 BC86-194 BC88-143

15 22 66 222 247 248 253 288 297 354

(a) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.



Location

Interpretation

Mandatory Appendices (Cont’d) Appendix 2, Fig. 2-4 (Cont’d) VIII-1-89-185 VIII-1-89-249 VIII-1-89-258 VIII-1-92-62 VIII-1-95-69 VIII-1-95-138 VIII-1-95-141 VIII-1-98-13 VIII-1-98-20 VIII-1-98-51 VIII-1-01-109 VIII-1-07-59 Appendix 2, Fig. 2-13 VIII-1-95-24 VIII-1-07-59 Appendix 2, Table 2-5.1 VIII-1-83-89R VIII-1-04-91 Appendix 2, 2-8 VIII-1-92-137 Appendix 2, 2-11 VIII-1-89-205 VIII-1-07-37 Appendix 2, 2-12(a)(1) VIII-1-83-216 Appendix 2, 2-13 VIII-1-07-37 Appendix 2, 2-13(a)(2) VIII-1-98-120 Appendix 2, 2-14 VIII-1-07-52 Appendix 3 VIII-1-86-115 VIII-1-92-80 Appendix 4 VIII-1-83-87 VIII-1-83-133R VIII-1-83-221 VIII-1-89-12 VIII-1-92-169 VIII-1-07-33 Appendix 4, 4-3(b) VIII-1-04-18 Appendix 4, 4-3(f) VIII-1-95-136 Appendix 5 VIII-1-86-02 VIII-1-89-139 Appendix 6 VIII-1-95-83 Appendix 6, 6-4 VIII-1-83-41 VIII-1-92-213 VIII-1-95-51 Appendix 7, VIII-1-83-167 7-3(a)(4)(b),(c),(d) Appendix 8 VIII-1-83-326 VIII-1-89-157 Appendix 8, 8-1 VIII-1-04-02 Appendix 9 VIII-1-83-162 VIII-1-83-288 VIII-1-83-308 VIII-1-89-124 VIII-1-89-165 VIII-1-89-241 VIII-1-89-265 VIII-1-89-278 VIII-1-92-23 VIII-1-92-77 VIII-1-92-77R VIII-1-92-116 VIII-1-92-185 VIII-1-92-210 VIII-1-92-217 Appendix 9, 9-2 VIII-1-04-105

File No.

Page No.

BC90-243 BC90-653 BC90-773 BC92-099 BC95-234 BC96-341A BC96-379 BC96-342 BC97-512 BC98-288 BC01-801 08-1302 BC94-591 08-1302 BC81-258* BC05-1667 BC93-041 BC90-436 03-1846 BC83-476 03-1846 BC00-268 08-716 BC87-004 BC92-167 BC82-828 BC82-718* BC83-578 BC87-204 BC93-485 07-1624 BC03-1647 BC96-277 BC79-696 BC89-218 BC95-389 BC82-409 BC94-003 BC95-046 BC82-830

434 464 468 536 661 703 704 725 728 744 840 944 632 944 6 913 575 441 937 125 937 785 942 277 543 52 87 127 348 592 933 877 702 213 412 667 25 614 650 97

BC84-564 BC89-302 BC02-4118 BC83-246 BC84-157 BC84-156 BC88-139 BC89-413 BC89-237 BC89-239 BC90-747 BC91-433 BC91-629 BC91-629* BC90-657 BC93-650 BC94-137 BC93-764 04-1530

184 419 873 94 159 177 406 427 461 479 483 514 542 549 563 598 613 615 928

Location

Interpretation

Mandatory Appendices (Cont’d) Appendix 9, Fig. 9-2 VIII-1-04-105 Appendix 9, Fig. 9-5 VIII-1-04-105 Appendix 9, 9-5(c)(4) VIII-1-95-149 Appendix 9, 9-6 VIII-1-01-115 Appendix 10 VIII-1-83-166 VIII-1-92-106 VIII-1-92-203 Appendix 10, 10-5 VIII-1-98-66 Appendix 10, 10-6 VIII-1-95-56 Appendix 10, 10-12 VIII-1-83-82 VIII-1-83-82R

Appendix 10, 10-15(d) Appendix 12 Appendix 12, 12-2 Appendix 12, 12-3 Appendix 12, 12-3(b)

Appendix 12, 12-4 Appendix 13

Appendix 13, Fig. 13-2 Appe ndix 13, 13-2(a)

Appendix 13, 13-4(b)

Appendix 13, 13-6 Appendix 13, 13-14(e) Appendix 14

Appendix 14, 14-10.4.1 Appendix 14, Appendix 14, Appendix 14, Appendix 15 Appendix 17

Table 14-20 14-40 14-50

File No.

VIII-1-95-10 VIII-1-95-94 VIII-1-83-15 VIII-1-83-281 VIII-1-83-333 VIII-1-86-186 VIII-1-01-80 VIII-1-86-20

04-1530 04-1530 BC96-478 BC01-870 BC82-754B BC92-304 BC94-059 BC98-307 BC92-332 BC80-289 BC80-289*, BC85-158 BC93-029 BC83-592 BC99-457 BC83-210 09-577 BC90-005 BC90-303 BC91-115 BC92-057 BC97-440 BC83-328 BC83-110, BC83-298 BC83-662 BC84-158 BC84-643 BC84-591 BC85-285 BC87-381 BC01-640 BC04-1500 BC01-225 BC56-148 BC92-103 BC01-074 BC02-2310 BC93-512 BC96-209 (BC96-228) BC94-291 BC95-473 BC82-206 BC84-135 BC84-125 BC87-405 BC01-411 BC85-327

VIII-1-83-286 VIII-1-83-154 VIII-1-86-30 VIII-1-83-361R VIII-1-89-257 VIII-1-89-271 VIII-1-89-291 VIII-1-89-298 VIII-1-92-38 VIII-1-92-101 VIII-1-92-102

BC84-153 BC83-170 BC85-487 BC77-701* BC90-772 BC90-300 BC91-045 BC91-047 BC91-559 BC92-010 BC92-345

VIII-1-92-131 VIII-1-83-306 VIII-1-98-87 VIII-1-83-158 VIII-1-10-02 VIII-1-89-170 VIII-1-89-187 VIII-1-92-36 VIII-1-92-58 VIII-1-98-16 VIII-1-83-184 VIII-1-83-230 VIII-1-83-252 VIII-1-83-289 VIII-1-83-363 VIII-1-86-23 VIII-1-86-09 VIII-1-86-182 VIII-1-01-91 VIII-1-04-51 VIII-1-01-42 VIII-1-86-56 VIII-1-92-155 VIII-1-01-31 VIII-1-01-124 VIII-1-92-222 VIII-1-95-118

(b) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


Page No.

928 928 707 846 96 559 610 754 652 49 189 573 176 767 93 953 429 435 520 534 726 103 131 142 159 206 221 216 310 833 897 809 242 583 805 849 617 690 627 677 13 156 192 312 828 220 158 91 225 205 467 481 488 491 527 557 558

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Location

Interpretation

File No.

Page No.

Mandatory Appendices (Cont’d) Appendix 17 (Cont’d) VIII-1-92-191 VIII-1-95-19 VIII-1-98-105 VIII-1-04-85 Appendix 18 VIII-1-83-166 VIII-1-98-101 Appendix 19, 19-3 VIII-1-92-12 Appendix 19, 19-4(b) VIII-1-89-106 Appendix 20, 20-2 VIII-1-07-42 Appendix 22, 22-3 VIII-1-89-152 VIII-1-89-252 VIII-1-92-47 VIII-1-98-27 Appendix 23 VIII-1-01-103 VIII-1-04-68 Appendix 24 VIII-1-98-32 VIII-1-01-136 Appendix 24, 24-1(f) VIII-1-92-209 Appendix 24, 24-2(e) VIII-1-89-107 VIII-1-89-226 Appendix 26 VIII-1-95-154 VIII-1-07-03 VIII-1-07-60 Appendix 27 VIII-1-95-116 VIII-1-98-91 Appendix 28 VIII-1-95-104 VIII-1-01-05 VIII-1-01-41 VIII-1-01-60 VIII-1-01-79 VIII-1-01-110 VIII-1-01-134 VIII-1-07-49 VIII-1-07-53

BC93-741 BC93-631 BC99-456 BC03-1476 BC82-754B BC99-609 BC91-432 BC89-169 07-2038 BC89-275 BC90-686 BC91-628 BC98-062 BC01-724 BC03-1826 BC98-177 BC01-329 BC94-134 BC89-185 BC90-545 BC96-525 BC06-948 08-1068 BC96-129 BC99-478 BC96-093 BC00-502 BC01-223 BC01-297 BC01-408 BC01-843 BC02-2640 08-888 08-1043

605 630 779 911 96 777 509 92 939 417 465 531 730 837 903 738 862 613 92 454 708 917 944 689 773 680 791 809 816 828 840 857 941 942

Nonmandatory Appendices Appendix A VIII-1-83-10 VIII-1-83-20 VIII-1-01-141 VIII-1-07-71 Appendix A, A-1(a) VIII-1-83-157 Appendix A, A-2 VIII-1-98-77 Appendix A, Fig. A-2 VIII-1-83-234 VIII-1-01-67 Appendix A, Table A-2 VIII-1-83-56 Appendix E VIII-1-83-228 Appendix F VIII-1-89-301 Appendix G, G-2 VIII-1-10-04 Appendix L VIII-1-83-212 VIII-1-83-238 Appendix L, L-1 VIII-1-86-190 Appendix L, L-2.2 VIII-1-01-125 Appendix L, L-7 VIII-1-83-150 VIII-1-89-242 VIII-1-01-32 Appendix L, L-7.5 VIII-1-01-125 Appendix M VIII-1-83-27 VIII-1-83-28 VIII-1-92-132 VIII-1-92-132R

BC82-164 BC82-259 BC02-2426 08-1286 BC83-207 BC99-363 BC83-534 BC01-301 BC81-403 BC82-824 BC91-209 09-607 BC82-882 BC83-599 BC87-428 BC96-381 BC83-120 BC90-404 BC01-079 BC96-381 BC80-198 BC80-607 BC90-728 BC90-728*

10 15 864 951 92 763 133 819 33 130 492 953 123 135 314 850 88 461 806 850 18 19 574 624

Location

Interpretation

Nonmandatory Appendices (Cont’d) Appendix M (Cont’d) VIII-1-92-94 VIII-1-92-94R VIII-1-92-132 VIII-1-98-17 Appendix M, M-5(a) VIII-1-83-338 VIII-1-98-90 Appendix M, M-5(b) VIII-1-98-90 VIII-1-01-03 Appendix M, M-5.7 VIII-1-04-97 Appendix M, M-5.8 VIII-1-04-70 Appendix M, M-6 VIII-1-95-25 Appendix M, M-7(a) VIII-1-98-43 Appendix M, M-8(a) VIII-1-01-16 Appendix P VIII-1-83-130 VIII-1-89-09 VIII-1-92-44 VIII-1-95-22 Appendix S VIII-1-95-73 Appendix W VIII-1-83-23 VIII-1-83-70 VIII-1-83-266 VIII-1-86-82 VIII-1-86-185 VIII-1-92-29 VIII-1-92-102 VIII-1-92-106 VIII-1-92-123 VIII-1-83-322 VIII-1-89-111 VIII-1-92-118 VIII-1-92-199 VIII-1-92-202 VIII-1-95-76 VIII-1-98-27 VIII-1-98-76 VIII-1-01-48 VIII-1-01-104 VIII-1-04-39 VIII-1-04-59 VIII-1-04-80 VIII-1-07-35 VIII-1-07-65 Appendix W, Table VIII-1-83-322 W-3 VIII-1-89-111 VIII-1-92-118 VIII-1-92-199 VIII-1-92-202 VIII-1-95-29 VIII-1-95-35 VIII-1-95-80 VIII-1-98-56 VIII-1-01-54 VIII-1-01-76 Appendix Y VIII-1-83-303 VIII-1-89-125 VIII-1-95-16 Appendix Y, Y-3 VIII-1-89-15 Appendix Z VIII-1-86-196 VIII-1-89-25

File No.

BC92-116 BC92-116* BC90-728 BC97-443 BC84-615 BC99-447 BC99-447 BC00-391 BC05-1136 BC04-1260 BC94-058 BC98-178 BC00-676 BC81-717 BC84-661 BC91-564 BC94-280 BC95-313 BC82-291 BC82-529 BC84-089 BC85-320 BC87-398 BC91-466 BC92-345 BC92-304 BC92-454 BC84-411 BC89-170 BC92-104 BC93-446 BC94-036 BC94-417 BC98-062 BC99-280 BC01-194 BC01-793 BC02-2682 BC05-078 BC05-672 07-139 08-1042 BC84-411 BC89-170 BC92-104 BC93-446 BC94-036 BC94-502 BC93-524 BC94-351 BC98-367 BC01-224 BC01-379 BC83-359 BC88-162 BC94-410 BC88-077 BC86-527 BC88-164

(c) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


Page No.

555 675 574 727 195 768 768 790 914 903 632 742 799 73 346 530 631 663 16 39 148 257 311 517 558 559 571 182 399 564 608 609 664 730 763 811 838 890 900 907 934 945 182 399 564 608 609 641 643 666 751 814 826 174 406 629 349 320 354

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Location

Interpretation

Nonmandatory Appendices (Cont’d) Appendix AA VIII-1-89-20 VIII-1-92-88 VIII-1-95-18 VIII-1-98-34 Appendix AA, AA-2.4.1 VIII-1-01-62 Appendix AA, AA-5 VIII-1-83-354 Appendix CC VIII-1-92-78 Appendix DD VIII-1-04-09 Appendix EE VIII-1-92-109 Code Cases Code Case 1177-7

Code Code Code Code Code Code Code Code

Case Case Case Case Case Case Case Case

1409-5 1667-1 1883 1939 1986-2 2005 2046 2211

Code Case 2235 Code Case 2235-9 Code Case 2278 Code Case 2506-1 Foreword

Interpretation Statement in Code Introduction U-1

U-1(a) U-1(c)

U-1(c)(1) U-1(c)(2)

File No.

BC88-125 BC92-170 BC92-326 BC98-225 BC01-313 BC85-028 BC92-148 BC03-1491 BC92-344

Page No.

Location

Interpretation

File No.

Introduction (Cont’d) U-1(c)(2) (Cont’d)

352 553 630 738 816 202 542 875 560

U-1(c)(2)(c)

U-1(c)(2)(d) U-1(c)(2)(e)

U-1(c)(2)(f) U-1(c)(2)(g) U-1(c)(2)(h)

VIII-1-83-125 VIII-1-83-237 VIII-1-83-316 VIII-1-83-123 VIII-1-86-53 VIII-1-83-206 VIII-1-83-342 VIII-1-89-99 VIII-1-86-160 VIII-1-95-147 VIII-1-01-07 VIII-1-01-111 VIII-1-98-41 VIII-1-01-39 VIII-1-10-05 VIII-1-01-29 VIII-1-07-23

BC82-863 BC83-598 BC84-410 BC82-834 BC86-106 BC83-463 BC84-667 BC89-112 BC87-194 BC96-472 BC00-501 BC99-084 BC98-327 BC01-125 09-808 BC01-094 07-952

70 134 180 70 241 114 197 89 302 706 792 845 741 808 953 804 930

VIII-1-83-164 VIII-1-83-364 VIII-1-95-29 VIII-1-95-49

BC84-610 BC85-179 BC94-502 BC94-672

95 206 641 649

U-1(c)(7) U-1(c)(7)(a) U-1(c)(8)

VIII-1-95-159

BC96-134

715

U-1(c)(9)

VIII-1-83-214 VIII-1-83-259 VIII-1-86-94 VIII-1-86-99 VIII-1-86-136 VIII-1-86-163 VIII-1-86-224 VIII-1-89-03 VIII-1-89-102 VIII-1-89-147 VIII-1-89-163 VIII-1-95-128 VIII-1-98-24 VIII-1-04-60 VIII-1-86-127 VIII-1-95-130 VIII-1-89-41 VIII-1-92-15 VIII-1-92-15R VIII-1-01-147 VIII-1-98-54 VIII-1-07-19 VIII-1-07-28

BC83-127 BC84-050 BC86-257 BC86-313 BC87-116 BC87-202 BC88-051 BC88-123 BC89-117 BC89-255 BC89-438 BC95-396 BC98-115 BC05-103 BC86-127 BC96-380 BC88-015 BC91-232 BC91-232* BC03-175 BC98-336 06-1272 07-291

124 146 262 264 278 303 334 343 390 415 421 694 729 900 282 694 361 511 511 866 750 929 932

U-1(c)(2)(i) U-1(c)(3)

U-1(c)(5)

U-1(c)(6)

U-1(d) U-1(e)

U-1(e)(1)

U-1(e)(1)(a) U-1(e)(1)(b) U-1(e)(1)(c)

U-1(e)(2)

VIII-1-07-43 VIII-1-98-89 VIII-1-01-98 VIII-1-04-33 VIII-1-98-89 VIII-1-98-54 VIII-1-01-131 VIII-1-04-47 VIII-1-10-11 VIII-1-04-20 VIII-1-98-19 VIII-1-01-15 VIII-1-98-112 VIII-1-01-97 VIII-1-04-37 VIII-1-01-15 VIII-1-04-90 VIII-1-89-46 VIII-1-89-176 VIII-1-89-231 VIII-1-92-164 VIII-1-95-44 VIII-1-83-99 VIII-1-86-85 VIII-1-89-110 VIII-1-89-261 VIII-1-83-247 VIII-1-86-13 VIII-1-89-34 VIII-1-86-164 VIII-1-86-98 VIII-1-89-01 VIII-1-89-114 VIII-1-86-142 VIII-1-86-143 VIII-1-86-145 VIII-1-86-154 VIII-1-86-165 VIII-1-86-211 VIII-1-95-02 VIII-1-95-107 VIII-1-83-03 VIII-1-89-112 VIII-1-89-115 VIII-1-92-52 VIII-1-01-04 VIII-1-83-256 VIII-1-83-282 VIII-1-83-329 VIII-1-86-193 VIII-1-95-52 VIII-1-01-09 VIII-1-01-28 VIII-1-86-24 VIII-1-89-168 VIII-1-89-29 VIII-1-95-88 VIII-1-98-57 VIII-1-98-81 VIII-1-01-14

07-1263 BC99-479 BC01-227 BC03-1277 BC99-479 BC98-336 BC02-3353 BC04-1115 09-771 BC03-915 BC97-444 BC00-664 BC00-096 BC00-465 BC04-346 BC00-664 BC06-095 BC88-174 BC90-020 BC90-479 BC93-503 BC94-669 BC82-808 BC86-292 BC89-167 BC90-652 BC83-648 BC85-291 BC88-246 BC87-291 BC86-301 BC88-119 BC89-004 BC87-161 BC87-165 BC87-169 BC87-175 BC87-250 BC88-007 BC94-281 BC96-122 BC81-260 BC89-186 BC89-202 BC90-299 BC00-500 BC84-030 BC84-137 BC82-755 BC85-222 BC95-047 BC00-596 BC00-705 BC84-600 BC89-437 BC88-189 BC95-466 BC98-368 BC99-373 BC00-598

(d) --`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Page No.


940 767 836 887 767 750 856 896 956 878 727 799 782 835 888 799 914 363 431 456 591 647 57 258 399 476 140 218 358 303 264 343 400 294 294 295 299 304 328 625 682 7 400 401 532 790 144 156 191 319 650 793 804 222 428 357 669 751 765 794


Location Introduction (Cont’d) U-1(e)(3) U-1(e)(4)

U-1(g)

U-1(g)(1)

U-1(g)(2) U-1(g)(3) U-1(h)

U-1(i) U-1(j)

U-1(k)

U-2(a) U-2(a)(4) U-2(b) U-2(d) U-2(f)(3) U-2(g)

U-2(h)

U-2(h)(3) U-2(i)

Table U-3

Interpretation

VIII-1-07-67 VIII-1-83-256R VIII-1-95-74 VIII-1-07-11 VIII-1-83-104 VIII-1-86-60 VIII-1-86-87 VIII-1-86-124 VIII-1-86-201 VIII-1-86-219 VIII-1-92-139 VIII-1-95-101 VIII-1-01-33 VIII-1-01-74 VIII-1-04-31 VIII-1-92-215 VIII-1-95-77 VIII-1-98-15 VIII-1-98-15 VIII-1-95-130 VIII-1-98-15 VIII-1-86-35 VIII-1-95-48 VIII-1-95-84 VIII-1-89-31 VIII-1-86-161 VIII-1-89-203 VIII-1-89-235 VIII-1-89-306 VIII-1-04-10 VIII-1-83-201 VIII-1-83-258 VIII-1-86-132 VIII-1-83-30 VIII-1-01-07 VIII-1-95-74 VIII-1-86-79 VIII-1-01-12 VIII-1-89-223 VIII-1-83-176 VIII-1-83-200 VIII-1-83-314 VIII-1-86-02 VIII-1-86-04 VIII-1-89-161 VIII-1-89-275 VIII-1-92-146 VIII-1-92-198 VIII-1-95-09 VIII-1-01-99 VIII-1-07-47 VIII-1-07-71 VIII-1-89-08 VIII-1-89-286 VIII-1-98-96 VIII-1-95-26 VIII-1-83-83 VIII-1-86-119 VIII-1-89-150 VIII-1-89-246 VIII-1-01-108

File No.

08-1399 BC84-030* BC94-118 BC06-1118 BC79-780 BC86-211 BC86-295 BC87-071 BC87-486 BC87-047 BC93-032 BC95-498B BC01-091 BC01-321 BC03-775 BC94-050 BC94-586 BC98-088 BC98-088 BC96-380 BC98-088 BC85-522 BC94-670 BC95-390 BC88-201 BC87-197 BC90-257 BC90-534 BC91-107 BC03-1192 BC83-420 BC84-033 BC87-107 BC82-166 BC00-501 BC94-118 BC86-259 BC00-131 BC90-535 BC83-285 BC83-408 BC84-379 BC79-696 BC85-227 BC89-374 BC91-011 BC93-373 BC92-219 BC94-474 BC01-326 08-637 08-1286 BC84-268 BC90-303 BC98-292 BC94-106 BC81-267 BC87-009 BC89-278 BC90-650 BC01-795

Page No.

Location Introduction (Cont’d) U-4

949 377 663 920 60 244 259 281 322 331 576 679 806 825 886 615 664 726 726 694 726 227 649 668 357 302 441 458 493 875 112 145 285 21 792 663 256 794 453 100 112 179 213 214 420 482 579 608 627 836 941 951 346 486 775 639 50 279 416 463 839

Part UB UB-6 UB-18

Part UCD UCD-16 UCD-78 UCD-101

Part UCI Part UCI

UCI-16 Table UCI-23 UCI-23(b) UCI-35 UCI-78 UCI-101

Part UCL UCL-1 UCL-23(b) UCL-34

UCL-34(a) and (b) UCL-35 UCL-35(c) UCL-36 UCL-51 Part UCS UCS-5(b)

UCS-6 UCS-6(b) UCS-6(b)(3)

UCS-7 UCS-10 UCS-11 UCS-12 UCS-12(b) UCS-23 Table UCS-23

Interpretation

File No.

VIII-1-07-27

07-613

931

VIII-1-86-228 VIII-1-83-312 VIII-1-83-312R

BC88-083 BC84-340 BC84-340*

335 178 190


BC00-131 BC84-667 BC80-053 BC90-003

794 197 62 428

VIII-1-83-352 VIII-1-92-61 VIII-1-95-34 VIII-1-01-12 VIII-1-86-197 VIII-1-86-86 VIII-1-83-172 VIII-1-86-137 VIII-1-89-305 VIII-1-83-108 VIII-1-86-91 VIII-1-86-137 VIII-1-86-152 VIII-1-89-169

BC85-016 BC92-098 BC91-573 BC00-131 BC87-070 BC86-293 BC83-256 BC87-117 BC91-103 BC80-053 BC86-235 BC87-117 BC87-164 BC90-003

202 535 643 794 320 259 98 287 493 62 261 287 298 428

VIII-1-83-136 VIII-1-83-205 VIII-1-83-189 VIII-1-83-192 VIII-1-83-335 VIII-1-95-137 VIII-1-83-207 VIII-1-95-137 VIII-1-83-107 VIII-1-83-191 VIII-1-98-108

BC83-224 BC83-461 BC81-531 BC82-655 BC84-384 BC96-334 BC83-464 BC96-334 BC82-169 BC82-221 BC00-080

76 114 106 108 193 703 114 703 62 107 780

VIII-1-86-29 VIII-1-92-83 VIII-1-86-103 VIII-1-89-66 VIII-1-92-37 VIII-1-95-03 VIII-1-92-207 VIII-1-98-80 VIII-1-04-100 VIII-1-01-92 VIII-1-92-152 VIII-1-95-131 VIII-1-92-03 VIII-1-92-83 VIII-1-83-37 VIII-1-92-152 VIII-1-95-39 VIII-1-83-84 VIII-1-83-180

BC85-451 BC92-173 BC86-370 BC88-439 BC91-600 BC94-286 BC94-108 BC99-362 BC06-541 BC01-340 BC93-138 BC96-306 BC91-230 BC92-173 BC82-314 BC93-138 BC94-567 BC82-545 BC83-311

224 544 266 372 520 625 611 764 915 833 582 695 505 544 24 582 645 50 101

(e) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.


` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Location

Interpretation

File No.

Page No.

Location

Part UCS (Cont’d) Table UCS-23 (Cont’d)

UCS-25

UCS-56

Table UCS-56

UCS-56(c) UCS-56(d)(2) UCS-56(d)(3) UCS-56(d)(4) UCS-56(e) UCS-56(f) Table UCS-56.1

UCS-57

VIII-1-83-218 VIII-1-83-226 VIII-1-83-253 VIII-1-86-32 VIII-1-83-228 VIII-1-86-46 VIII-1-86-134 VIII-1-89-126 VIII-1-83-74 VIII-1-83-100 VIII-1-83-103 VIII-1-83-237 VIII-1-83-335 VIII-1-86-55 VIII-1-89-63 VIII-1-89-212 VIII-1-89-212R VIII-1-92-147 VIII-1-92-153 VIII-1-95-116 VIII-1-98-91 VIII-1-01-143 VIII-1-83-97 VIII-1-83-100 VIII-1-83-119 VIII-1-83-168 VIII-1-83-307 VIII-1-86-06 VIII-1-86-41 VIII-1-86-55 VIII-1-86-204 VIII-1-86-207 VIII-1-89-30 VIII-1-89-284 VIII-1-89-289 VIII-1-89-293 VIII-1-92-104 VIII-1-92-176 VIII-1-92-182 VIII-1-92-183 VIII-1-92-183R VIII-1-95-33 VIII-1-98-108 VIII-1-01-19 VIII-1-86-17 VIII-1-92-66 VIII-1-98-11 VIII-1-98-110 VIII-1-83-175 VIII-1-01-87 VIII-1-83-59 VIII-1-89-202 VIII-1-83-165 VIII-1-89-232 VIII-1-89-232R VIII-1-04-73 VIII-1-83-122 VIII-1-86-140 VIII-1-92-147 VIII-1-95-63

BC83-546 BC81-301 BC83-663 BC85-496 BC82-824 BC85-605 BC87-112 BC88-242 BC82-664 BC82-825 BC82-873 BC83-598 BC84-384 BC86-114 BC88-428 BC90-493 BC90-493* BC93-418 BC93-358 BC96-129 BC99-478 BC02-2819 BC82-806 BC82-825 BC82-411 BC83-084 BC83-636 BC85-245 BC85-468 BC86-114 BC85-509 BC87-270 BC88-192 BC90-863 BC90-693 BC91-049 BC92-290 BC93-641 BC93-647 BC93-648 BC93-648* BC88-084 BC00-080 BC00-691 [BC00-708] BC85-323 BC92-054 BC97-275 BC00-082 BC83-283 BC01-588 BC81-656 BC90-388 BC82-736 BC90-481 BC90-481* BC05-032 BC82-549 BC87-171 BC93-418 BC95-167

Part UCS (Cont’d) Table UCS-57 UCS-66

126 129 142 226 130 238 286 407 41 58 59 134 193 241 371 449 449 580 582 689 773 865 56 58 68 97 176 215 235 241 324 326 357 486 488 489 558 595 597 597 597 642 780 800

Fig. UCS-66

Fig. UCS-66, Note (c) UCS-66(a)

UCS-66(a)(1)(a) UCS-66(a)(1)(b) UCS-66(a)(3) UCS-66(b)

UCS-66(b)(3) UCS-66(c)

219 537 719 781 100 831 34 440 96 457 457 904 69 293 580 654

UCS-66(c)(2)

UCS-66(d) UCS-66(g)

Interpretation

VIII-1-83-271 VIII-1-89-53 VIII-1-89-141 VIII-1-89-216 VIII-1-89-225 VIII-1-92-20 VIII-1-92-21 VIII-1-92-157 VIII-1-92-186 VIII-1-95-158 VIII-1-01-123 VIII-1-89-44 VIII-1-89-190 VIII-1-89-274 VIII-1-92-93 VIII-1-92-122 VIII-1-92-134 VIII-1-92-142 VIII-1-92-144 VIII-1-92-201 VIII-1-92-218 VIII-1-92-219 VIII-1-95-54 VIII-1-95-62 VIII-1-95-158 VIII-1-01-25 VIII-1-01-48 VIII-1-07-25 VIII-1-07-31 VIII-1-89-279 VIII-1-89-295 VIII-1-95-68 VIII-1-01-137 VIII-1-95-62 VIII-1-89-308 VIII-1-98-13 VIII-1-89-217 VIII-1-92-41 VIII-1-82-45 VIII-1-86-230 VIII-1-89-239 VIII-1-92-98 VIII-1-95-85 VIII-1-98-93 VIII-1-98-05 VIII-1-89-17 VIII-1-89-76 VIII-1-89-155R VIII-1-89-267 VIII-1-92-63 VIII-1-95-15 VIII-1-95-160 VIII-1-98-10 VIII-1-98-39 VIII-1-83-126 VIII-1-83-127 VIII-1-83-253 VIII-1-83-270 VIII-1-86-220 VIII-1-01-06

File No.

BC84-113 BC88-387 BC89-229 BC90-399 BC90-544 BC88-240 BC89-037 BC93-439 BC93-652 BC97-254 BC02-2314 BC88-111 BC90-261 BC90-861 BC90-247 BC92-406 BC92-455 BC93-104 BC93-349 BC94-044 BC93-777A BC94-073 BC93-438 BC95-161 BC97-254 BC01-056 BC01-194 07-725 06-1121 BC90-771 BC91-083 BC95-233 BC99-102 BC95-161 BC90-726 BC96-342 BC90-496 BC91-044 BC81-038 BC88-086 BC89-162 BC92-319 BC95-397 BC99-565 BC96-257 BC88-097 BC89-005 BC89-312* BC89-253 BC92-075 BC94-186 BC96-378 BC97-274 BC98-286 BC83-073 BC83-083 BC83-663 BC84-106 BC87-041 BC00-503

(f) --`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---



Page No.

151 367 413 451 454 513 513 584 598 710 849 362 436 482 554 570 574 578 579 609 616 616 651 654 710 803 811 931 933 484 490 661 862 654 494 725 451 529 87 336 460 556 668 774 717 350 380 418 479 536 629 725 719 740 71 71 142 151 332 791


Location Part UCS (Cont’d) Fig. UCS-66.1

UCS-67

UCS-67(a)

UCS-67(a)(1) UCS-67(a)(2)

UCS-67(b) UCS-67(c) UCS-67(d) UCS-67(d)(2)

UCS-68 UCS-68(b) UCS-68(c)

UCS-79

UCS-79(b) UCS-79(b) and Part UHA UCS-79(d)

UCS-79(d)(3) UCS-79(e) UCS-85

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Interpretation

VIII-1-98-93 VIII-1-01-37 VIII-1-89-322 VIII-1-95-158 VIII-1-01-110 VIII-1-04-75 VIII-1-89-240 VIII-1-89-273 VIII-1-92-124 VIII-1-92-173 VIII-1-98-52 VIII-1-01-46 VIII-1-01-06 VIII-1-01-64 VIII-1-01-86 VIII-1-01-93 VIII-1-89-23 VIII-1-92-142 VIII-1-83-49 VIII-1-92-187 VIII-1-92-219 VIII-1-95-102 VIII-1-01-06 VIII-1-01-36 VIII-1-01-93 VIII-1-92-126 VIII-1-98-99 VIII-1-95-15 VIII-1-95-160 VIII-1-01-19

File No.

Page No.

Location Part UCS (Cont’d) UCS-85(b)

774 807 551 710 840 905 460 482 571 594 749 810 791 817 830 834 354 578 29 599 616 679 791 807 834 572 776 629 725 800


BC99-565 BC01-106 BC90-683 BC97-254 BC01-843 BC05-563 BC89-226 BC90-770 BC92-457 BC93-591 BC98-086 BC01-192 BC00-503 BC01-317 BC01-403 BC01-647 BC88-142 BC93-104 BC81-546 BC93-683 BC94-073 BC96-098 BC00-503 BC01-105 BC01-647 BC93-140 BC99-597 BC94-186 BC96-378 BC00-691 [BC00-708] BC02-2793 BC02-2427 BC82-587 BC83-582 BC83-586 BC84-170 BC88-048 BC88-472 BC01-288 BC96-351 BC82-403

855 848 40 128 129 305 333 380 815 695 88

Part UG UG-4

VIII-1-83-12 VIII-1-83-81 VIII-1-83-105 VIII-1-83-337 VIII-1-86-48 VIII-1-89-259 VIII-1-92-46 VIII-1-95-50 VIII-1-95-142 VIII-1-86-15 VIII-1-92-59 VIII-1-83-114 VIII-1-83-122 VIII-1-83-293 VIII-1-86-37 VIII-1-86-125R VIII-1-89-19 VIII-1-89-69 VIII-1-89-140 VIII-1-01-73

BC82-170 BC82-729 BC82-798 BC84-601 BC86-068 BC90-746 BC91-627 BC94-684 BC96-352 BC85-319 BC91-289 BC81-130 BC82-549 BC84-193 BC85-606 BC87-019* BC88-120 BC88-193 BC89-224 BC01-287

11 43 61 194 239 468 530 649 704 218 535 65 69 161 233 293 352 378 412 825

UG-6 UG-8

UCS-85(b) and (e)

UCS-85(c) UCS-85(d) Part UF UF-5(b) UF-7

UF-30 UF-31(b)(1)(a) UF-32(b) UF-37 UF-53

UG-4(a) UG-4(b)

UG-5(b)

UG-8(a) UG-8(b) UG-9 UG-10

Interpretation

File No.

Page No.

VIII-1-83-32 VIII-1-83-116 VIII-1-86-27 VIII-1-86-27R VIII-1-86-45 VIII-1-86-194 VIII-1-92-39 VIII-77-33R VIII-1-83-227 VIII-1-89-314 VIII-1-98-55 VIII-1-83-353 VIII-1-01-101 VIII-1-89-162

BC82-240 BC81-559 BC85-140 BC85-140* BC85-602 BC86-105 BC91-565 NA BC82-563 BC90-483 BC98-365 BC85-025 BC01-341 BC89-375

22 66 223 549 237 319 528 789 130 497 751 202 837 421

VIII-1-07-64 VIII-1-89-73 VIII-1-95-44 VIII-1-01-49 VIII-1-07-64 VIII-1-89-39 VIII-1-92-213 VIII-1-89-135 VIII-1-92-01 VIII-1-83-311 VIII-1-92-01 VIII-1-89-58

08-599 BC88-471 BC94-669 BC01-196 08-599 BC88-411 BC94-003 BC89-206 BC90-235 BC84-313 BC90-235 BC88-413

945 379 647 812 945 360 614 410 505 178 505 369

VIII-1-83-24 VIII-1-86-38 VIII-1-89-65 VIII-1-92-74 VIII-1-92-83 VIII-1-92-89 VIII-1-92-172 VIII-1-92-197 VIII-1-83-204 VIII-1-83-213 VIII-1-92-180 VIII-1-89-95 VIII-1-92-168 VIII-1-86-209 VIII-1-98-79 VIII-1-86-343 VIII-1-92-149 VIII-1-83-348

BC82-295 BC85-608 BC88-437 BC91-412 BC92-173 BC92-216 BC92-460 BC93-716 BC83-453 BC83-075 BC93-627 BC89-082 BC93-448 BC87-474 BC99-358 BC84-674 BC93-111 BC82-385B, BC83-085 BC86-379 BC87-425 BC87-430 BC88-422 BC88-423 BC89-004 BC91-013 BC93-111 BC93-669 07-2024

16 233 372 540 544 553 593 607 113 124 596 387 592 327 764 197 581 200

VIII-1-86-105 VIII-1-86-188 VIII-1-89-07 VIII-1-89-59 VIII-1-89-60 VIII-1-89-75 VIII-1-89-277 VIII-1-92-149 VIII-1-95-109 VIII-1-07-46

(g) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

267 313 345 369 370 380 483 581 687 940


Location Part UG (Cont’d) UG-10(a)

UG-10(a)(1) UG-10(a)(2) UG-11

UG-11(a)

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

UG-11(a)(1)

UG-11(a)(2) UG-11(a)(3) UG-11(b)

UG-11(c)

UG-11(c)(2) UG-12 UG-12(b) UG-13 UG-14

UG-15

Interpretation

File No.

VIII-1-83-06 VIII-1-86-62 VIII-1-89-243 VIII-1-98-70 VIII-1-92-18 VIII-1-89-198 VIII-1-83-65 VIII-1-83-217 VIII-1-83-293 VIII-1-83-345 VIII-1-89-282 VIII-1-95-128 VIII-1-95-150 VIII-1-98-01 VIII-1-01-22 VIII-1-01-149 VIII-1-89-145 VIII-1-89-283 VIII-1-92-40 VIII-1-95-59 VIII-1-98-68 VIII-1-04-11 VIII-1-83-174 VIII-1-89-280 VIII-1-95-14 VIII-1-98-47 VIII-1-98-55 VIII-1-98-67 VIII-1-07-39 VIII-1-89-204 VIII-1-95-140 VIII-1-86-92 VIII-1-83-01 VIII-1-86-87 VIII-1-86-109 VIII-1-86-112 VIII-1-89-96 VIII-1-89-236 VIII-1-95-70 VIII-1-83-55 VIII-1-83-186R VIII-1-86-34 VIII-1-92-06 VIII-1-92-50 VIII-1-92-54 VIII-1-92-120 VIII-1-95-21 VIII-1-95-122 VIII-1-83-330 VIII-1-89-320 VIII-1-95-131 VIII-1-07-20 VIII-1-83-109 VIII-1-95-125 VIII-1-92-83 VIII-1-86-128 VIII-1-92-95 VIII-1-04-93 VIII-1-89-28 VIII-1-89-194 VIII-1-92-16

BC81-660 BC86-218 BC90-651 BC98-488 BC91-399 BC90-294 BC82-293 BC83-544 BC84-193 BC84-677 BC90-791 BC95-396 BC96-523 BC96-536 BC00-703 BC03-458 BC89-242 BC90-865 BC92-036 BC95-050 BC99-218 BC01-279 BC83-266 BC90-774 BC94-136 BC98-296 BC98-365 BC99-083 07-394 BC90-435 BC96-373 BC86-255 BC81-195 BC86-273 BC86-451 BC86-513 BC89-084 BC90-625 BC95-173 BC81-269 BC83-071A* BC85-503 BC91-270 BC90-788 BC91-402 BC92-405 BC94-494 BC96-219 BC83-320 BC91-265 BC96-306 07-673 BC82-195 BC96-249 BC92-173 BC87-043 BC87-296 BC06-507 BC88-182 BC90-345 BC91-255

Page No.

Location Part UG (Cont’d) UG-16(b)

8 244 462 756 512 438 37 125 161 198 485 694 707 716 801 867 414 485 528 653 755 875 99 484 629 743 751 755 939 441 704 261 6 259 268 276 388 458 662 32 121 226 506 532 532 570 631 691 191 499 695 929 63 692 544 283 555 913 356 437 511

UG-16(b)(1) UG-16(b)(2)

UG-16(b)(3) UG-16(b)(4)

UG-16(c)

UG-16(d) UG-18 UG-19

UG-19(a) UG-19(b) and (c) UG-20

UG-20(a)

UG-20(b) UG-20(f)

UG-20(f)(1) UG-20(f)(3) UG-21

Interpretation

File No.

VIII-1-83-285 VIII-1-86-214 VIII-1-95-145 VIII-1-86-36 VIII-1-95-145 VIII-1-04-69 VIII-1-98-74 VIII-1-89-156 VIII-1-92-216 VIII-1-98-58 VIII-1-98-74 VIII-1-86-67 VIII-1-92-216 VIII-1-98-33 VIII-1-98-84 VIII-1-04-92 VIII-1-07-09 VIII-1-83-261 VIII-1-86-11 VIII-1-89-316 VIII-1-83-60 VIII-1-89-82 VIII-1-95-09 VIII-1-01-99 VIII-1-07-24 VIII-1-07-28 VIII-1-01-12 VIII-1-83-309 VIII-1-86-02 VIII-1-86-121 VIII-1-89-133 VIII-1-89-268 VIII-1-92-64 VIII-1-04-45 VIII-1-95-153 VIII-1-01-138 VIII-1-07-41 VIII-1-89-270 VIII-1-01-23 VIII-1-86-231 VIII-1-89-48 VIII-1-89-62 VIII-1-89-91 VIII-1-89-100 VIII-1-89-127 VIII-1-89-132 VIII-1-89-138 VIII-1-89-166 VIII-1-89-199 VIII-1-89-138R VIII-1-89-248 VIII-1-89-322 VIII-1-92-187 VIII-1-92-201 VIII-1-01-84 VIII-1-01-121 VIII-1-89-137 VIII-1-95-111 VIII-1-86-121 VIII-1-92-71 VIII-1-95-64

BC84-141 BC88-011 BC96-245 BC85-599 BC96-245 BC03-1903 BC99-269 BC88-052 BC93-718 BC98-526 BC99-269 BC86-240 BC93-718 BC98-180 BC99-222 BC06-357 BC06-1362 BC84-052 BC85-287 BC90-679 BC82-659 BC89-056 BC94-474 BC01-326 07-1004 07-291 BC00-131 BC84-264 BC79-696 BC84-598 BC89-189 BC90-225 BC92-102 BC04-1070 BC96-233 BC01-405 02-4113 BC90-295 BC00-084 BC88-117 BC88-212 BC88-427 BC89-074 BC89-114 BC88-430 BC89-160 BC89-217 BC89-414 BC90-314 BC89-217* BC90-690 BC90-683 BC93-683 BC94-044 BC01-607 BC02-2427 BC89-209 BC96-246 BC84-598 BC91-177 BC95-172

(h) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


Page No.

157 329 705 233 705 903 757 419 615 752 757 247 615 738 766 913 919 147 217 498 35 382 627 836 930 932 794 177 213 280 409 480 536 895 708 863 939 481 802 337 364 371 386 389 407 409 411 427 439 447 464 551 599 609 830 848 411 687 280 539 655


Location Part UG (Cont’d) UG-22

UG-22(b) UG-22(g) UG-22(i) UG-23

UG-23(a) UG-23(b) UG-23(c) UG-23(d)

UG-24 ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

UG-25 UG-25(e) UG-25(f) UG-27

UG-27(c) UG-27(c)(1)

UG-28

Fig. UG-28.1; Note (2) UG-28 and U-2(g) UG-28(f) UG-29

Interpretation

VIII-1-86-191 VIII-1-89-06 VIII-1-89-10 VIII-1-89-143 VIII-1-92-184 VIII-1-95-82 VIII-1-01-70 VIII-1-01-83 VIII-1-07-47 VIII-1-95-64 VIII-1-01-82 VIII-1-04-27 VIII-1-04-29 VIII-1-93-621 VIII-1-86-166 VIII-1-89-50 VIII-1-89-84 VIII-1-92-44 VIII-1-95-131 VIII-1-01-106 VIII-1-83-92 VIII-1-83-92R VIII-1-86-172 VIII-1-01-70 VIII-1-86-225 VIII-1-01-83 VIII-1-04-16 VIII-1-89-119 VIII-1-95-59 VIII-1-83-228 VIII-1-89-255 VIII-1-95-115 VIII-1-92-197 VIII-1-83-95 VIII-1-83-320 VIII-1-86-65 VIII-1-89-97 VIII-1-89-164 VIII-1-04-67 VIII-1-04-76 VIII-1-92-31 VIII-1-83-211 VIII-1-89-14 VIII-1-92-85 VIII-1-83-233 VIII-1-83-308 VIII-1-86-107 VIII-1-89-121 VIII-1-95-13 VIII-1-07-13 VIII-1-04-106 VIII-1-07-45 VIII-1-01-113 VIII-1-98-111 VIII-1-83-169 VIII-1-83-140 VIII-1-83-142 VIII-1-95-13 VIII-1-98-04 VIII-1-01-126

File No.

BC87-313 BC83-137 BC87-160 BC89-238 BC93-621 BC95-310 BC01-380 BC01-592 08-637 BC95-172 BC01-591 BC04-324 BC04-325 BC84-592 BC87-251 BC88-358 BC89-064 BC91-564 BC96-306 BC01-521 BC82-756 BC82-756* BC85-288 BC01-380 BC88-053 BC01-592 BC03-1319 BC89-228 BC95-050 BC82-824 BC90-655 BC96-273 BC93-216 BC82-787 BC84-130 BC86-237 BC89-085 BC89-411 BC03-1634 BC05-565 BC91-517 BC82-417 BC87-297 BC92-240 BC83-356 BC84-156 BC85-447 BC88-121 BC94-131 BC06-1199 01-153 08-362 BC00-591 BC00-083 BC83-113 BC82-285 BC83-168 BC94-131 BC96-475 BC02-2744

Page No.

Location Part UG (Cont’d) UG-29(b)

314 345 347 413 598 667 821 829 941 655 829 884 885 184 304 365 383 530 695 838 54 121 306 821 334 829 877 402 653 130 467 689 607 56 181 246 388 427 902 905 518 123 349 551 132 177 268 404 628 920 928 940 846 782 97 78 79 628 717 850

UG-29(c)

UG-30

UG-31 UG-32

UG-32(d)

UG-32(e) UG-32(g) UG-32(j) UG-32(l) UG-33

UG-33(a) UG-34

UG-34(a) UG-34(b) UG-34(c)(1) UG-34(c)(2) Fig. UG-34 sketch (e)

Interpretation

VIII-1-89-275 VIII-1-92-68 VIII-1-92-198 VIII-1-83-68 VIII-1-95-110 VIII-1-04-24 VIII-1-83-325 VIII-1-98-103 VIII-1-01-126 VIII-1-04-94 VIII-1-83-362 VIII-1-83-135 VIII-1-83-172 VIII-1-83-182 VIII-1-83-215 VIII-1-83-246 VIII-1-83-320 VIII-1-86-49 VIII-1-89-108 VIII-1-92-31 VIII-1-86-174 VIII-1-92-156 VIII-1-01-57 VIII-1-01-155 VIII-1-86-88 VIII-1-89-184 VIII-1-86-175 VIII-1-92-160 VIII-1-89-209 VIII-1-89-121 VIII-1-98-04 VIII-1-98-38 VIII-1-10-06 VIII-1-83-11 VIII-1-83-113 VIII-1-83-181 VIII-1-83-195 VIII-1-83-286 VIII-1-83-327 VIII-1-83-339 VIII-1-83-363 VIII-1-86-96 VIII-1-86-178 VIII-1-89-206 VIII-1-92-195 VIII-1-95-112 VIII-1-98-31 VIII-1-98-116 VIII-1-01-78 VIII-1-01-105 VIII-1-04-62 VIII-1-07-02 VIII-1-07-69 VIII-1-01-30 VIII-1-98-12 VIII-1-98-03 VIII-1-04-30 VIII-1-83-323 VIII-1-98-03 VIII-1-83-355 VIII-1-98-65

File No.

BC91-011 BC92-101 BC92-219 BC82-308 BC95-401 BC03-1845 BC84-545 BC99-611 BC02-2744 BC06-559 BC85-559 BC83-159 BC83-256 BC83-312 BC83-404 BC83-643 BC84-130 BC86-069 BC89-188 BC91-517 BC86-417 BC92-419 BC01-288 BC03-619 BC86-300 BC90-193 BC87-302 BC93-486 BC90-482 BC88-121 BC96-475 BC98-176 08-1546 BC82-165 BC83-033 BC83-315 BC83-007 BC84-153 BC84-592 BC84-635 BC84-643 BC86-270 BC87-391 BC90-439 BC93-670 BC96-256 BC98-174 BC00-155 (BC00-267) BC01-407 BC01-336 BC04-517 BC06-667 08-1562 BC00-707 BC97-283 BC96-105 BC03-623 BC84-429 BC96-105 BC85-066 BC99-100

(i) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


Page No.

482 538 609 39 687 883 183 778 850 913 205 75 98 102 125 139 181 239 393 518 307 583 815 870 260 433 307 589 448 404 717 740 954 11 66 102 109 158 184 195 206 263 308 442 607 688 737 784 827 838 901 917 950 805 720 716 886 182 716 203 754


Location

Interpretation

Part UG (Cont’d) Fig. UG-34 ske tch (f) Fig. UG-34 sketch (g) Fig. UG-34 sketch (j) Fig. UG-34 sketch (m) Fig. UG-34 sketch (n) UG-35 UG-35(b) UG-35(d) UG-36

UG-36 & Interpretation VIII-79-73 UG-36(a) UG-36(b)(1) UG-36(b)(2) UG-36(c)(3)

UG-36(c)(3)(a), (b), and (c)

UG-37

UG-37(a)

File No.

Page No.

VIII-1-01-30 VIII-1-07-53 VIII-1-01-109 VIII-1-01-107 VIII-1-86-106 VIII-1-83-190 VIII-1-83-08 VIII-1-86-24 VIII-1-83-195 VIII-1-83-236 VIII-1-83-262 VIII-1-89-37 VIII-1-95-94 VIII-1-98-08 VIII-1-07-54 VIII-1-83-244

BC00-707 08-1043 BC01-801 BC01-651 BC86-381 BC82-197 BC82-066 BC84-600 BC83-007 BC83-597 BC84-053 BC88-249 BC95-473 BC97-262 08-1081 BC83-638

805 942 840 839 267 106 9 222 109 134 147 359 677 718 942 138


BC84-139 BC91-014 BC01-079 BC82-191 BC84-430 BC87-183 BC96-236 BC95-461, BC96-533 BC02-2796 08-909 BC82-518 BC89-231 BC90-234 BC90-234* BC93-359 BC96-105 BC82-843 BC83-306 BC83-404 BC85-138 BC85-324 BC86-237 BC87-289 BC88-085 BC88-467 BC89-304 BC90-006 BC90-490 BC92-388 BC96-227 BC01-639 BC03-991 08-1081 08-1429 08-1725 BC91-292 BC91-474 BC91-474* BC91-102 BC91-102* BC91-303 BC00-156 BC02-2318

156 483 806 12 183 299 692 716

VIII-1-04-03 VIII-1-07-50 VIII-1-83-46 VIII-1-89-120 VIII-1-89-196 VIII-1-89-196R VIII-1-92-154 VIII-1-98-03 VIII-1-83-102 VIII-1-83-179 VIII-1-83-215 VIII-1-83-359 VIII-1-86-18 VIII-1-86-65 VIII-1-86-168 VIII-1-86-229 VIII-1-84-72 VIII-1-89-149 VIII-1-89-171 VIII-1-89-233 VIII-1-92-119 VIII-1-95-123 VIII-1-01-90 VIII-1-04-04 VIII-1-07-54 VIII-1-07-62 VIII-1-07-70 VIII-1-92-05 VIII-1-92-25 VIII-1-92-25R VIII-1-92-69 VIII-1-92-69R VIII-1-92-72 VIII-1-98-117 VIII-1-01-119

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Location

Interpretation

File No.

Page No.

Part UG (Cont’d) UG-37(a) (Cont’d)

Fig. UG-37

UG-37(b)

UG-37(c) UG-37(d) UG-37(d)(2) Fig. UG-37.1

UG-39

UG-39(b)(1) 873 941 28 403 438 475 583 716 59 101 125 204 219 246 305 336 379 416 429 457 569 692 832 873 942 944 950 506 515 605 538 538 539 784 848

UG-39(c) UG-40

UG-40(b) UG-40(c)(2) UG-40(d)

UG-40(d)(3) UG-41

Fig. UG-41.1 UG-42

UG-42(a) UG-42(a)(2) UG-42(e) UG-43 UG-43(d)

VIII-1-04-01 VIII-1-83-16 VIII-1-01-90 VIII-1-01-91 VIII-1-04-57 VIII-1-04-79 VIII-1-83-238 VIII-1-83-240 VIII-1-83-285 VIII-1-83-290 VIII-1-83-362 VIII-1-86-50 VIII-1-89-213 VIII-1-92-116 VIII-1-83-359 VIII-1-92-69 VIII-1-92-69R VIII-1-83-181 VIII-1-83-195 VIII-1-83-225 VIII-1-95-94 VIII-1-98-21 VIII-1-01-105 VIII-1-07-69 VIII-1-95-121 VIII-1-01-20 VIII-1-83-286 VIII-1-83-261 VIII-1-86-18 VIII-1-89-83 VIII-1-89-313 VIII-1-98-313R VIII-1-92-42 VIII-1-92-119 VIII-1-07-21 VIII-1-07-70 VIII-1-86-144 VIII-1-07-62 VIII-1-92-17 VIII-1-83-240 VIII-1-83-277 VIII-1-83-332 VIII-1-83-341 VIII-1-83-284 VIII-1-89-36 VIII-1-89-49 VIII-1-01-44 VIII-1-01-125 VIII-1-86-151 VIII-1-83-94 VIII-1-83-250 VIII-1-83-324 VIII-1-83-75 VIII-1-04-83 VIII-1-04-66 VIII-1-83-195 VIII-1-07-29 VIII-1-86-102 VIII-1-89-215 VIII-1-92-70

BC02-4117 BC82-223 BC01-639 BC01-640 BC04-1634 BC05-623 BC83-599 BC83-602 BC84-141 BC84-174 BC83-559 BC86-079 BC90-495 BC90-657 BC85-138 BC91-102 BC91-102* BC83-315 BC83-007 BC79-323 BC95-473 BC97-514 BC01-336 08-1562 BC96-217 BC00-696 BC84-153 BC84-052 BC85-324 BC89-060 BC90-470 BC90-470* BC91-089 BC92-388 07-075 08-1725 BC87-167 08-1429 BC91-268 BC83-602 BC84-142 BC84-115 BC84-662 BC84-140 BC88-183 BC88-221 BC01-302 BC96-381 BC87-110 BC82-784 BC83-652A BC84-430 BC82-677 BC04-841 BC03-1098 BC83-007 07-1291 BC86-322 BC90-291 BC91-308

(j) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

873 13 832 833 899 906 135 135 157 160 205 239 450 563 204 538 538 102 109 129 677 728 838 950 691 801 158 147 219 383 497 749 529 569 930 950 294 944 512 135 154 192 196 157 359 365 810 850 298 55 141 183 41 908 9 02 109 932 266 450 539


Location

Interpretation

File No.

Page No.

Location

Part UG (Cont’d) UG-43(d) (Cont’d)

UG-43(e)

UG-43(f) UG-43(g) UG-44

UG-44(j) UG-45

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

UG-45(b) UG-45(b)(1) UG-45(c)

UG-46

UG-46(a)

UG-46(f) UG-46(f)(2) UG-46(f)(3) UG-46(g)(1) UG-47 UG-53


BC99-599 BC04-685 BC06-541 BC87-383 BC86-380 BC94-416 BC81-260 BC83-355 BC96-249 BC82-306 BC84-032 BC84-140 BC90-435 BC92-077 BC96-373 BC96-534 BC98-230 BC01-303 BC02-2920 BC82-294 BC82-343 BC83-030 BC82-880 BC83-328 BC83-317 BC83-226 BC83-404 BC83-544 BC83-332 BC84-361 BC87-159 BC97-262 BC97-517 BC00-157 BC01-589 02-3218 BC96-210 BC95-353 BC01-300 BC81-651 BC83-600 BC94-217 BC83-208 BC85-488 BC89-078 BC96-273 BC03-1295 BC84-599 BC94-679 07-543 BC84-599 BC85-124 BC84-071 BC93-031 BC03-176 BC02-2562 BC89-042 BC01-777 BC84-430 BC94-291

Part UG (Cont’d) UG-53(g) Fig. UG-53.6 UG-55 UG-55(a) UG-76(c) UG-77

778 887 915 307 405 632 7 132 692 38 145 157 441 535 704 730 775 810 856 38 59 68 77 103 103 111 125 125 174 179 296 718 727 785 829 925 690 701 816 8 135 624 98 225 386 689 876 194 648 945 194 204 148 575 867 849 408 901 183 627

UG-77(a)

UG-77(c)

UG-78

UG-79

UG-79(b) UG-80

UG-80(a)(1) UG-80(a)(2) UG-81(a)

UG-81(b) UG-82 UG-82(b) UG-84

Fig. UG-84.1 UG-84(b)(2)

UG-84(c) UG-84(c)(4) UG-84(c)(6) UG-84(e)(3) UG-84(f)(2) UG-84(g)(2)

Interpretation


File No.

BC82-864 BC82-864 BC82-122 BC83-453 BC82-417 BC86-320 BC89-208 BC98-242 BC82-258 BC95-158 BC97-405 BC86-273 BC93-036 BC94-308 BC83-151 BC84-676 BC90-388 BC94-012 BC94-067B BC82-549 BC83-586 BC88-472 BC03-762 02-2792 BC87-108 BC82-122 BC88-121 08-114 BC92-275 BC94-111 BC89-234 BC91-051 BC88-163 BC90-727 BC92-150 BC92-275 BC92-419 BC83-036 BC82-122 BC89-168 BC81-609 BC83-580 BC87-074 BC87-429 BC88-081 BC89-158 BC93-638 BC99-598 BC01-056 03-1651 BC80-251 BC85-294 BC91-413 03-1651 BC90-342, BC90-442 BC84-131 BC90-441 BC01-104 BC89-253 BC93-751

(k) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


Page No.

63 63 171 113 121 265 411 742 14 653 737 263 577 663 75 201 440 606 655 69 129 380 917 925 321 171 404 942 572 665 478 490 377 519 542 572 583 88 171 400 34 128 280 326 350 392 594 777 803 927 170 218 509 927 488 153 500 807 479 783


Location Part UG (Cont’d) UG-84(g)(4) UG-84(h)(2)(a) UG-84(h)(2)(b) UG-84(h)(2)(d) UG-84(h)(3)

UG-84(h)(3)(b) UG-84(i)

UG-84(i)(1)

UG-84(i)(3)(a)(2) UG-84(j) Fig. UG-84.1 UG-90

UG-90(b) UG-90(b)(2) UG-90(b)(6)

UG-90(b)(8)

UG-90(b)(9) UG-90(b)(18) UG-90(c)(1)

UG-90(c)(1)(i) UG-90(c)(1)(I) UG-90(c)(1)(m) UG-90(c)(2)

UG-91 UG-91(b) UG-93

Interpretation

VIII-1-92-129 VIII-1-95-06 VIII-1-92-221 VIII-1-89-142 VIII-1-83-209 VIII-1-83-263 VIII-1-89-21 VIII-1-92-108 VIII-1-92-51 VIII-1-83-38 VIII-1-83-73 VIII-1-86-130 VIII-1-86-213 VIII-1-92-81 VIII-1-01-110 VIII-1-92-181 VIII-1-92-206 VIII-1-98-40 VIII-1-95-60 VIII-1-95-20 VIII-1-07-25 VIII-1-86-51 VIII-1-86-51R VIII-1-89-263 VIII-1-92-106 VIII-1-89-250 VIII-1-01-68 VIII-1-86-129 VIII-1-92-22 VIII-1-98-92 VIII-1-98-115 VIII-1-83-134 VIII-1-95-32 VIII-1-95-32R VIII-1-07-44 VIII-1-83-229 VIII-1-01-68 VIII-1-83-349 VIII-1-86-19 VIII-1-95-05 VIII-1-98-35 VIII-1-86-42 VIII-1-89-54 VIII-1-89-245 VIII-1-98-36 VIII-1-95-108 VIII-1-83-79 VIII-1-83-349 VIII-1-83-360 VIII-1-86-113 VIII-1-86-215 VIII-1-89-94 VIII-1-95-144 VIII-1-95-147 VIII-1-01-146 VIII-1-92-179 VIII-1-95-30 VIII-1-83-364 VIII-1-89-71 VIII-1-89-98 VIII-1-89-146

File No.

BC92-404 BC94-292 BC94-110 BC89-235 BC83-537 BC84-057 BC88-134 BC92-334 BC88-434 BC82-357 BC82-663 BC87-046 BC88-010 BC92-169 BC01-843 BC93-629 BC94-072 BC98-227 BC95-157 BC94-496 07-725 BC86-086 BC86-086* BC89-129 BC92-304 BC90-725 BC01-348 BC87-045 BC91-267 BC99-496 BC99-564 BC83-151 BC94-589 BC94-589* 08-105 BC83-024 BC01-348 BC84-335 BC85-326 BC94-288 BC98-229 BC86-591 BC88-390 BC90-649 BC98-241 BC96-099 BC82-684 BC84-335 BC85-187 BC86-522 BC88-027 BC89-081 BC96-240 BC96-472 BC03-198 BC93-590 BC94-584 BC85-179 BC88-459 BC89-111 BC89-251

Page No.

Location

Interpretation

File No.

Part UG (Cont’d) UG-93 (Cont’d)

573 626 617 413 115 147 353 560 532 24 40 284 329 543 840 596 611 741 653 631 931 240 253 477 559 465 819 283 514 773 784 75 642 661 940 131 819 200 220 626 739 236 367 463 739 682 43 200 204 277 330 387 705 706 866 596 641 206 379 389 415

UG-93(a)(1)

UG-93(a)(2) UG-93(d)(2) UG-93(d)(3)

UG-93(d)(4) UG-96 UG-96(a) UG-97 UG-98

UG-99

UG-99(a) UG-99(a)(1) UG-99(b)

VIII-1-89-173 VIII-1-89-181 VIII-1-92-49 VIII-1-98-115 VIII-1-83-01 VIII-1-89-116 VIII-1-89-280 VIII-1-92-189 VIII-1-01-152 VIII-1-07-16 VIII-1-89-02 VIII-1-01-58 VIII-1-83-52 VIII-1-83-144 VIII-1-83-161 VIII-1-83-173 VIII-1-83-298 VIII-1-86-135 VIII-1-89-180 VIII-1-89-182 VIII-1-92-04 VIII-1-98-51 VIII-1-98-120 VIII-1-07-57 VIII-1-83-298 VIII-1-92-106 VIII-1-83-229 VIII-1-86-131 VIII-1-92-71 VIII-1-92-163

BC90-010 BC90-226 BC90-004 BC99-564 BC81-195 BC89-204 BC90-774 BC93-034 BC03-659 BC06-1578 BC88-122 BC01-295 BC80-514 BC83-198 BC83-268 BC83-261 BC82-827 BC87-113 BC90-025 BC90-236 BC91-283 BC98-288 BC00-268 08-826 BC82-827 BC92-304 BC83-024 BC87-079 BC91-177 BC93-540

430 432 531 784 6 401 484 599 869 922 343 815 30 80 94 99 172 286 432 433 506 744 785 943 172 559 131 284 539 590

VIII-79-13R

BC78-847*, BC81-433* BC81-258* BC83-072 BC84-051 BC83-308 BC86-238 BC85-329 BC86-505 BC87-426 BC88-363 BC89-190 BC90-787 BC89-376 BC92-124 BC93-765 BC01-226 BC02-105a BC88-175* BC92-220 08-1762 BC89-218 BC99-346 BC89-319 BC94-414 BC95-172 BC95-420 BC98-062 BC00-084

5

VIII-81-89R VIII-1-83-128 VIII-1-83-260 VIII-1-83-301 VIII-1-86-66 VIII-1-86-71 VIII-1-86-122 VIII-1-86-189 VIII-1-89-51 VIII-1-89-134 VIII-1-89-281 VIII-1-89-310 VIII-1-92-65 VIII-1-92-204 VIII-1-01-55 VIII-1-01-127 VIII-1-89-27R VIII-1-92-84 VIII-1-10-09 VIII-1-89-139 VIII-1-98-86 VIII-1-89-287 VIII-1-95-27 VIII-1-95-64 VIII-1-95-93 VIII-1-98-27 VIII-1-01-23

(l) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.


6 72 146 173 246 248 280 313 366 410 485 495 537 610 814 850 356 551 955 412 766 487 640 655 676 730 802

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Location

Interpretation

File No.

Page No.

Part UG (Cont’d) UG-99(b) (Cont’d)

UG-99(c) UG-99(d) UG-99(e) UG-99(f) UG-99(g)

UG-99(g)(1) UG-99(h) UG-99(j) UG-100

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

UG-100(a) UG-100(a)(2) UG-100(b) UG-100(d) UG-100(d)(1) UG-101

UG-101(a)(1) UG-101(d) UG-101(i) UG-101(j) UG-101(k) UG-101(l) UG-101(m)

UG-101(m)(2)(a) UG-101(m)(2)(c) UG-101(n) UG-101(o) UG-101(p) UG-102

UG-102(c) UG-115 UG-115(b) UG-116

Location

Interpretation

File No.

VIII-1-86-93 VIII-1-86-110 VIII-1-89-86 VIII-1-89-86R VIII-1-89-193 VIII-1-92-09 VIII-1-92-09R VIII-1-92-09R-2 VIII-1-92-48 VIII-1-95-116 VIII-1-95-144 VIII-1-01-129 VIII-1-04-84 VIII-1-86-223 VIII-1-89-77 VIII-1-89-151 VIII-1-89-22 VIII-1-04-88 VIII-1-01-103 VIII-1-01-23 VIII-1-89-228 VIII-1-01-23 VIII-1-92-08 VIII-1-86-206 VIII-1-86-108 VIII-1-95-17 VIII-1-95-117 VIII-1-83-145 VIII-1-83-269 VIII-1-86-22 VIII-1-92-98 VIII-1-95-31 VIII-1-89-210 VIII-1-89-210R VIII-1-92-75 VIII-1-92-159 VIII-1-01-21 VIII-1-01-150 VIII-1-07-10 VIII-1-07-40 VIII-1-89-318 VIII-1-92-40 VIII-1-92-162 VIII-1-89-101 VIII-1-89-101R VIII-1-89-224 VIII-1-01-17 VIII-1-86-146 VIII-1-86-148 VIII-1-92-145 VIII-1-95-45 VIII-1-95-47 VIII-1-95-55 VIII-1-95-148 VIII-1-01-50 VIII-1-01-75 VIII-1-92-75 VIII-1-98-94 VIII-1-01-100

BC86-256 BC86-202 BC89-046 BC89-046* BC90-393 BC91-386 BC91-386* BC91-386** BC92-005 BC96-129 BC96-240 BC02-2791 BC02-4219 BC88-049 BC89-016 BC89-269 BC88-135 BC05-1589 BC01-724 BC00-084 BC90-427 BC00-084 BC91-310 BC87-069 BC86-448 BC94-411 BC96-130 BC83-200 BC84-105 BC85-334 BC92-319 BC94-587 BC90-418 BC90-418* BC91-467 BC93-481 BC00-698 BC03-454 BC06-1117 07-1364 BC90-685 BC92-036 BC93-510 BC89-115 BC89-115* BC90-543 BC00-680 BC87-158 BC87-162 BC93-113 BC94-671 BC94-412 BC93-482 BC96-522 BC01-198 BC01-377 BC91-467 BC99-574 BC01-644


VIII-1-01-77 VIII-1-07-32 VIII-1-95-93 VIII-1-98-86 VIII-1-83-287 VIII-1-01-88 VIII-1-04-87 VIII-1-92-115 VIII-1-01-139 VIII-1-83-118 VIII-1-89-57 VIII-1-01-02 VIII-1-01-26 VIII-1-89-211 VIII-1-01-27 VIII-1-95-11 VIII-1-83-121R VIII-1-86-114 VIII-1-92-65 VIII-1-92-84 VIII-1-92-204 VIII-1-01-55 VIII-1-07-32 VIII-1-83-04 VIII-1-86-77 VIII-1-01-23 VIII-1-01-139 VIII-1-01-26 VIII-1-83-308 VIII-1-86-07 VIII-1-89-309 VIII-1-92-117 VIII-1-83-333 VIII-1-01-65 VIII-1-92-91 VIII-1-92-196 VIII-1-01-161 VIII-1-95-114 VIII-1-01-151 VIII-1-83-245 VIII-1-83-355 VIII-1-92-140 VIII-1-01-117 VIII-1-95-43 VIII-1-89-257 VIII-1-86-156 VIII-1-01-151 VIII-1-01-161 VIII-1-07-61 VIII-1-83-243 VIII-1-89-207 VIII-1-89-207R VIII-1-89-294 VIII-1-86-162 VIII-1-89-183 VIII-1-89-238 VIII-1-92-212 VIII-1-83-142 VIII-1-83-328 VIII-1-86-47

BC01-406 07-470 BC95-420 BC99-346 BC84-154 BC01-635 BC05-1566 BC92-389 BC01-774 BC82-397 BC88-412 BC00-393 BC01-81 BC90-480 BC01-092 BC94-564 BC81-184* BC87-001 BC92-124 BC92-220 BC93-765 BC01-226 07-470 BC81-526 BC86-254 BC00-084 BC01-774 BC01-81 BC84-156 BC85-283 BC87-382 BC92-056 BC84-125 BC01-333 BC92-239 BC93-734 02-3319 BC96-215 BC03-1035 BC83-642 BC85-066 BC93-052 BC02-102a BC94-666 BC90-772 BC87-189 BC03-1035 02-3319 08-1351 BC83-633 BC90-405 BC90-405* BC91-056 BC87-199 BC90-239 BC90-464 BC94-190 BC83-168 BC82-284 BC85-607

827 933 676 766 158 831 912 562 863 67 368 789 803 449 804 628 168 277 537 551 610 814 933 8 255 802 863 803 177 215 495 563 192 818 554 607 937 688 868 139 203 577 847 646 467 300 868 937 944 137 447 447 489 303 433 459 614 79 190 238

UG-116(a)

UG-116(a)(1)(b)(4) UG-116(a)(2) UG-116(a)(3) UG-116(a)(4) UG-116(a)(6) UG-116(b) UG-116(b)(1)

UG-116(c)

UG-116(e)

UG-116(e)(1) UG-116(e)(2) UG-116(e)(4)

UG-116(f) UG-116(h)

UG-116(j)

(m) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.


262 269 384 550 437 507 508 527 531 689 705 855 911 333 381 417 353 912 837 802 455 802 507 325 268 630 690 80 150 221 556 642 448 475 541 589 801 868 919 939 499 528 590 390 623 453 800 295 296 579 647 648 651 706 812 826 541 774 836


Location Part UG (Cont’d) UG-116(k) UG-116(m)

UG-116(n)(2) UG-117(a) UG-117(b)

UG-117(e) UG-117(f) UG-118

UG-118(b) UG-119

UG-119(c)

UG-119(c)(1) UG-119(e) UG-119(f) UG-119(g)(1) UG-120

UG-120(a)

UG-120(c)

UG-120(d) UG-120(e) UG-125 ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

Interpretation

VIII-1-07-28 VIII-1-83-170 VIII-1-86-133 VIII-1-83-111 VIII-1-04-102 VIII-1-95-106 VIII-1-95-126 VIII-1-95-127 VIII-1-95-127R VIII-1-92-203 VIII-1-01-53 VIII-1-83-328 VIII-1-92-53 VIII-1-95-99 VIII-1-04-32 VIII-1-92-113 VIII-1-83-249 VIII-1-83-328 VIII-1-86-30 VIII-1-89-193 VIII-1-01-145 VIII-1-92-10 VIII-1-92-190 VIII-1-95-120 VIII-1-83-251 VIII-1-86-78 VIII-1-89-18R VIII-1-95-81 VIII-1-92-13 VIII-1-86-167 VIII-1-83-17 VIII-1-83-346 VIII-1-86-82 VIII-1-86-200 VIII-1-89-153 VIII-1-89-214 VIII-1-95-144 VIII-1-07-35 VIII-1-83-44 VIII-1-83-112 VIII-1-89-177 VIII-1-92-148 VIII-1-92-179 VIII-1-86-34 VIII-1-89-234 VIII-1-92-105 VIII-1-92-148 VIII-1-95-12 VIII-1-01-47 VIII-1-01-50 VIII-1-01-75 VIII-1-01-149 VIII-1-04-36 VIII-1-89-21 VIII-1-07-67 VIII-1-83-29 VIII-1-86-33 VIII-1-89-312 VIII-1-89-312R VIII-1-92-94 VIII-1-92-133


File No.

07-291 BC83-208 BC87-109 BC83-022 04-853 BC95-465A BC95-465B BC96-128 BC96-128* BC94-059 BC01-222 BC82-284 BC91-384 BC95-474 BC03-777 BC92-355 BC83-650 BC82-284 BC85-487 BC90-393 BC03-179 BC91-387 BC93-145 BC96-216 BC83-661 BC86-258 BC88-106* BC93-736 BC91-210 BC87-255 BC82-238 BC84-695 BC85-320 BC87-473 BC89-281 BC90-498 BC96-240 07-139 BC82-509 BC83-032 BC90-021 BC93-421 BC93-590 BC85-503 BC90-497 BC92-295 BC93-421 BC94-056 BC97-401 BC01-198 BC01-377 BC03-458 BC04-231 BC88-134 08-1399 BC81-268 BC85-502 BC90-343 BC90-343* BC92-116 BC92-093

Page No.

Location

Interpretation

File No.

Page No.


932 98 285 63 927 681 693 693 715 610 813 190 533 678 886 562 140 190 225 437 865 508 605 691 141 255 351 666 510 304 13 199 257 322 417 450 705 934 27 64 431 580 596 226 458 559 580 628 811 812 826 867 888 353 949 20 226 496 527 555 574

UG-125(a)

UG-125(b) UG-125(c)

UG-125(c)(2) UG-125(e)

UG-125(f) UG-125(g)

UG-125(h) UG-126

UG-126(a) UG-126(b) UG-127

UG-127(a)(3) UG-127(a)(3)(b) UG-127(a)(3)(b)(5) UG-127(b)(4) UG-129

UG-129(a) UG-129(e) UG-130 UG-131 UG-131(d)(2) UG-132 UG-133 UG-133(a) UG-133(c) UG-133(d)

UG-134 UG-134(c)(4) UG-134(d)


BC97-443 BC98-291 BC99-084 BC05-1270 BC86-215 BC89-205 BC92-207 06-1323 BC03-175 BC88-386 BC91-012 BC99-293 BC01-649 BC83-633 BC88-208 BC96-259 BC94-620 BC96-259 BC97-398 BC97-280 BC80-198 BC92-207 BC93-637 BC94-267 BC00-679 BC04-583 BC89-109 BC94-230 BC82-405 BC82-511 BC87-190 BC89-207 BC91-560 BC82-740 BC90-542 BC95-489 BC85-290 BC82-405 BC82-511 BC86-199 BC99-293 BC94-190 BC99-573 BC04-1369 BC04-1276 BC79-720 BC85-486 BC83-039 BC82-740 BC85-502 BC01-702 BC93-112 BC97-266 BC89-009 BC92-351 BC01-910 BC84-602 BC93-501A BC80-607 BC90-631

(n) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

727 793 845 907 282 402 599 937 866 378 493 757 834 137 385 717 665 717 752 754 18 599 644 677 794 890 476 618 30 39 300 402 529 109 466 705 217 30 39 242 757 614 845 897 897 61 240 110 109 226 837 581 741 383 561 889 201 609 19 498


Location Part UG (Cont’d) UG-135 UG-135(b)

UG-135(b)(1) UG-135(d) UG-135(d)(1) UG-135(e) UG-135(f) UG-135(g) UG-136

UG-136(a)(2) UG-136(a)(3) UG-136(a)(7) UG-136(b) UG-136(b)(2) UG-136(b)(3)

UG-136(c)(3) UG-136(c)(3)(b) UG-136(c)(3)(c) UG-136(c)(4)(d) UG-136(c)(5) UG-136(d) UG-136(d)(4) UG-137(d)(3) Part UHA ... UHA-1

UHA-12

Table UHA-23

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

UHA-32 UHA-32(e) UHA-33(b) UHA-42 UHA-51

Page No.

Interpretation

File No.

VIII-1-98-17 VIII-1-86-100 VIII-1-92-67 VIII-1-92-99 VIII-1-01-16 VIII-1-04-13 VIII-1-04-38 VIII-1-83-27 VIII-1-01-16 VIII-1-83-28 VIII-1-83-51 VIII-1-83-197 VIII-1-83-186R VIII-1-83-129 VIII-1-83-27 VIII-1-83-33 VIII-1-83-280 VIII-1-01-96 VIII-1-89-266 VIII-1-92-177 VIII-1-86-205 VIII-1-92-152 VIII-1-01-11 VIII-1-01-128 VIII-1-83-319 VIII-1-83-278 VIII-1-04-89 VIII-1-89-303 VIII-1-04-26 VIII-1-01-95 VIII-1-95-97 VIII-1-98-71

BC97-443 BC86-317 BC92-055 BC92-321 BC00-676 BC03-1789 BC01-910 BC80-198 BC00-676 BC80-607 BC82-405 BC83-039 BC83-071A* BC81-583 BC80-198 BC82-260 BC83-591 BC01-701 BC90-187 BC93-583a BC86-378 BC93-138 BC00-047 BC02-3595 BC83-223C BC82-860 BC04-1311 BC90-864A BC03-1329 BC01-692 BC91-445 BC98-522

727 265 537 557 799 876 889 18 799 19 30 110 121 72 18 22 155 835 479 595 325 582 793 855 181 154 912 492 884 834 678 756

VIII-1-01-27 VIII-1-86-187 VIII-1-89-197 VIII-1-86-76 VIII-1-86-76R VIII-1-95-131 VIII-1-83-26 VIII-1-83-47 VIII-1-83-48 VIII-1-83-163 VIII-1-83-188 VIII-1-89-237 VIII-1-89-269 VIII-1-92-87 VIII-1-92-90 VIII-1-95-90 VIII-1-10-01 VIII-1-83-119 VIII-1-83-18 VIII-1-86-16 VIII-1-98-75 VIII-1-83-89 VIII-1-83-117 VIII-1-83-222 VIII-1-83-279 VIII-1-86-40 VIII-1-89-68

BC01-092 BC87-424 BC90-255 BC86-253 BC86-253* BC96-306 BC82-311 BC82-519 BC82-521 BC81-576 BC81-443 BC90-627 BC90-256 BC92-249 BC92-226 BC93-109 08-617 BC82-411 BC82-242 BC85-321 BC99-107 BC83-685 BC82-305 BC83-580 BC83-318 BC85-414 BC88-176

804 312 438 255 275 695 17 28 29 95 105 459 480 552 553 675 952 68 14 219 763 53 67 128 155 234 377

Location

Interpretation

File No.

Part UHA (Cont’d) UHA-51 (Cont’d)

UHA-51(a)(4) UHA-51(b) UHA-51(b)(5) UHA-51(b)(5)(a)(1) UHA-51(b)(5)(b)

UHA-51(b)(5)(c) UHA-51(c) UHA-51(g)

UHA-52(b) UHA-102 Part UHT UHT-6 UHT-17 UHT-18

UHT-18(b) UHT-28 UHT-34 UHT-57 UHT-79 Part UHX Part UHX

UHX-1 UHX-3.2 UHX-4(e)(2) UHX-9 UHX-10

UHX-10(a) UHX-11 Fig. UHX-11.2 UHX-11.3 Fig. UHX-11.3 UHX-11.5 UHX-12 UHX-13

VIII-1-92-135 VIII-1-95-103 VIII-1-98-100 VIII-1-04-34 VIII-1-07-22 VIII-1-07-38 VIII-1-89-42 VIII-1-89-52 VIII-1-89-218 VIII-1-83-09 VIII-1-83-294 VIII-1-89-130 VIII-1-92-103 VIII-1-92-35 VIII-1-83-18 VIII-1-01-56 VIII-1-95-155 VIII-1-98-50 VIII-1-98-98 VIII-1-89-319 VIII-1-83-335

BC92-456 BC96-201 BC99-598 BC04-056 07-418 07-612 BC88-071 BC88-375 BC90-520 BC82-127 BC84-228 BC89-127 BC92-343 BC91-100 BC82-242 BC01-285 BC96-409 BC98-425 BC99-596 BC91-055 BC84-384

575 680 777 887 930 938 361 366 451 9 162 408 558 519 14 814 709 744 776 499 193


BC99-102 BC82-273 BC83-463 BC85-466 BC90-732 BC85-600 BC90-732 BC89-018 BC83-592 BC83-586

862 23 114 223 468 384 468 381 176 129

VIII-1-04-41 VIII-1-04-28 VIII-1-04-71 VIII-1-07-71 VIII-1-07-73 VIII-1-10-10 VIII-1-10-12 VIII-1-04-104 VIII-1-04-44 VIII-1-07-15 VIII-1-04-99 VIII-1-07-01 VIII-1-04-52 VIII-1-04-53 VIII-1-04-81 VIII-1-04-61 VIII-1-07-30 VIII-1-04-19 VIII-1-04-23 VIII-1-04-19 VIII-1-07-71 VIII-1-07-01 VIII-1-07-01 VIII-1-07-30 VIII-1-10-10

BC04-864 BC04-043 BC05-271 08-1286 08-948 09-586 09-594 04-010 BC04-472 BC06-578 BC06-423 BC06-558 BC05-005 BC05-006 BC05-1101 BC05-411 07-1370 BC03-1648 BC03-1825 BC03-1648 08-1286 BC06-558 BC06-558 07-1370 09-586

890 885 904 951 952 956 956 928 895 921 915 916 897 898 907 900 946 878 879 878 951 916 916 946 956

(o) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.



Location Part UHX (Cont’d) Fig. UHX-13.1(a) UHX-13.2 UHX-13.4(a) UHX-13.4(e)(1) UHX-14

Interpretation

File No.

Page No.

UHX-15 UHX-19.2.2 UHX-19.3


08-1429 BC05-459 BC05-007 BC05-092 BC05-075 BC06-558 07-1370 08-1286 09-719 09-719

944 905 900 898 898 916 946 951 955 955

Part ULT Table ULT-23 ULT-27 ULT-99

VIII-1-01-29 VIII-1-01-29 VIII-1-01-69

BC01-094 BC01-094 BC01-361

804 804 820

VIII-1-83-334 VIII-1-86-59 VIII-1-83-151 VIII-1-86-21 VIII-1-86-21

BC84-334 BC86-201 BC82-652 BC85-330 BC85-330

193 243 89 220 220

VIII-1-83-121 VIII-1-83-35 VIII-1-83-178 VIII-1-83-152 VIII-1-83-121 VIII-1-83-304 VIII-1-04-17 VIII-1-01-21 VIII-1-83-80 VIII-1-92-171 VIII-1-98-107 VIII-1-07-18 VIII-1-83-74

BC81-184 BC82-273 BC83-304 BC83-167 BC81-184 BC83-538 BC03-1320 BC00-698 BC82-719 BC92-453 BC99-608 06-461 BC82-664

69 23 101 90 69 175 877 801 43 593 780 929 41

VIII-1-83-10 VIII-1-83-35 VIII-1-83-160 VIII-1-83-222 VIII-1-01-118 VIII-1-83-77 VIII-1-83-77R VIII-1-83-207 VIII-1-92-92 VIII-1-92-112 VIII-1-92-211 VIII-1-95-137 VIII-1-98-91 VIII-1-01-14 VIII-1-04-48 VIII-1-07-60 VIII-1-86-84 VIII-1-92-24 VIII-1-92-194 VIII-1-95-138 VIII-1-98-07 VIII-1-98-113

BC82-164 BC82-273 BC83-034 BC83-580 BC02-106a BC82-679 BC82-679* BC83-464 BC92-246 BC92-352 BC94-180 BC96-334 BC99-478 BC00-598 BC04-1205 08-1068 BC86-286 BC91-455 BC93-684 BC96-341A BC96-341b BC00-100

10 23 94 128 847 42 549 114 554 561 613 703 773 794 896 944 258 515 606 703 718 783

Part ULW Part ULW

ULW-16(b) ULW-52(a) ULW-54(a) Part UNF UNF-8 UNF-19 UNF-19(b) UNF-23 Table UNF-23.2

UNF-56 UNF-57 UNF-57(c) UNF-58(a), (b) UNF-58(c) UNF-78 UNF-95 Part UW UW-2

UW-2(a)

UW-2(a)(1) UW-2(a)(1)(b) UW-2(a)(1)(c) UW-2(a)(1)(d)

Location Part UW (Cont’d) UW-2(a)(4) UW-2(b)

UW-2(c)

UW-2(d) UW-2(d)(2) UW-3

UW-3(a) UW-3(a)(1) UW-3(a)(2) UW-3(a)(3) UW-4(b) UW-5 UW-5(b) UW-5(b)(2) UW-9 UW-9(c)

UW-9(d)

UW-9(e) UW-10 UW-11

UW-11(a)

Interpretation

File No.

VIII-1-04-43 VIII-1-83-89 VIII-1-83-117 VIII-1-83-294 VIII-1-89-218 VIII-1-92-77 VIII-1-92-77R VIII-1-89-45 VIII-1-89-156 VIII-1-92-114 VIII-1-95-154 VIII-1-98-97 VIII-1-98-119 VIII-1-07-48 VIII-1-98-63 VIII-1-83-10 VIII-1-83-177 VIII-1-83-182 VIII-1-83-187 VIII-1-86-08 VIII-1-89-33 VIII-1-98-62 VIII-1-01-120 VIII-1-07-05 VIII-1-04-65 VIII-1-92-30 VIII-1-92-30R VIII-1-98-61 VIII-1-95-04 VIII-1-92-172 VIII-1-83-297 VIII-1-92-89 VIII-1-89-311 VIII-1-92-56 VIII-1-86-184 VIII-1-83-193 VIII-1-83-195 VIII-1-92-45 VIII-1-01-80 VIII-1-07-51 VIII-1-83-78 VIII-1-83-159 VIII-1-86-73 VIII-1-86-199 VIII-1-89-195 VIII-1-95-53 VIII-1-98-60 VIII-1-83-155 VIII-1-83-62 VIII-1-83-122 VIII-1-83-186R VIII-1-83-272 VIII-1-89-104 VIII-1-92-153 VIII-1-98-09 VIII-1-98-09R VIII-1-89-191 VIII-1-89-227 VIII-1-01-63 VIII-1-04-95 VIII-1-04-101

BC04-1043 BC83-685 BC82-305 BC84-228 BC90-520 BC91-629 BC91-629* BC88-139 BC88-052 BC92-376 BC96-525 BC99-522 BC00-242 01-378 BC97-282 BC82-164 BC83-286 BC83-312 BC79-246 BC85-284 BC88-245 BC98-510 BC02-2681 BC05-1586 BC03-1082 BC91-468 BC91-468* BC98-505 BC94-287 BC92-460 BC82-122 BC92-216 BC90-237 BC91-475 BC87-387 BC82-739 BC83-007 BC91-567 BC01-411 08-114 BC82-683 BC83-262 BC85-189 BC87-475 BC90-400 BC95-049 BC97-404 BC83-197 BC81-685B BC82-549 BC83-071A* BC84-116 BC89-126 BC93-358 BC97-263 BC03-268* BC90-350 BC90-412 BC01-315 BC04-1455 BC05-1574

(p) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


Page No.

891 53 67 162 451 542 549 362 419 562 708 775 785 941 753 10 100 102 105 216 358 753 848 918 902 517 623 753 625 593 171 553 496 534 311 108 109 530 828 942 42 93 253 321 437 651 752 91 36 69 121 152 391 582 719 861 436 455 817 914 916

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Location

Interpretation

File No.

Page No.

Location

Part UW (Cont’d) UW-11(a) (Cont’d)

UW-11(a)(1) UW-11(a)(2) UW-11(a)(4) UW-11(a)(5)

UW-11(a)(5)(b) ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

UW-11(a)(5)(b) UW-11(a)(6) UW-11(a)(7)

UW-11(b)

UW-11(d) UW-11(e) UW-12

Table UW-12

File No.

VIII-1-86-10 VIII-1-86-180 VIII-1-89-04 VIII-1-89-64 VIII-1-89-67 VIII-1-89-159 VIII-1-89-189 VIII-1-89-201 VIII-1-92-97 VIII-1-92-107 VIII-1-92-138 VIII-1-92-158 VIII-1-92-165 VIII-1-95-40 VIII-1-95-41 VIII-1-95-67 VIII-1-01-154 VIII-1-07-56 VIII-1-83-07 VIII-1-83-203 VIII-1-83-254R VIII-1-83-07R VIII-1-86-68 VIII-1-86-203 VIII-1-86-218 VIII-1-89-144 VIII-1-86-181 VIII-1-89-210 VIII-1-89-210R VIII-1-92-32 VIII-1-01-63 VIII-1-01-135 VIII-1-04-101 VIII-1-01-89 VIII-1-01-135 VIII-1-83-198 VIII-1-86-90 VIII-1-86-96 VIII-1-07-26 VIII-1-83-72 VIII-1-95-100 VIII-1-89-221 VIII-1-92-160 VIII-1-89-222 VIII-1-89-230 VIII-1-86-226 VIII-1-04-96 VIII-1-83-357 VIII-1-83-144 VIII-1-98-62 VIII-1-98-77 VIII-1-89-285 VIII-1-86-26 VIII-1-83-292 VIII-1-07-66

BC85-286 BC87-203 BC88-124 BC88-429 BC88-163 BC89-331 BC90-306 BC90-326 BC92-310 BC92-317 BC93-110 BC93-460 BC93-397 BC94-569 BC94-576 BC95-170 BC02-3288 08-104 BC81-664 BC83-429 BC83-664* BC81-664* BC85-208 BC86-196 BC88-043 BC89-240 BC87-245 BC90-418 BC90-418* BC91-518 BC01-315 BC02-4115 BC05-1574 BC01-636 BC02-4115 BC83-139 BC85-225 BC86-270 07-1262 BC82-593 BC95-480 BC90-510 BC93-486 BC90-523 BC90-440 BC88-076 BC04-1456 BC85-096 BC83-198 BC98-510 BC99-363 BC91-048 BC85-466 BC84-192 08-1396

216 309 344 371 377 420 435 440 556 560 576 584 591 645 646 656 883 943 9 113 168 189 247 324 331 414 310 448 475 518 817 857 916 832 857 111 260 263 931 40 679 452 589 453 456 335 914 203 80 753 763 486 223 161 949

Fig. UW-13.1 sketch (a)

VIII-1-95-67 VIII-1-95-100 VIII-1-98-60

BC95-170 BC95-480 BC97-404

656 679 752

Fig. UW-13.1 sketch (b) FIg. UW-13.1 sketch (e)

VIII-1-89-38 VIII-1-98-60

BC88-389 BC97-404

360 752

Part UW (Cont’d) Table UW-12 (Cont’d)

VIII-1-07-68 VIII-1-07-72 VIII-1-83-64 VIII-1-86-139 VIII-1-95-146 VIII-1-07-14 VIII-1-83-64 VIII-1-86-139 VIII-1-83-64 VIII-1-86-139 VIII-1-95-105 VIII-1-95-156 VIII-1-04-14 VIII-1-83-231 VIII-1-86-159 VIII-1-89-224 VIII-1-92-32 VIII-1-98-109 VIII-1-01-89 VIII-1-01-135 VIII-1-01-150 VIII-1-04-06 VIII-1-07-56 VIII-1-89-129 VIII-1-83-45 VIII-1-83-50 VIII-81-16R VIII-1-95-156 VIII-1-83-22 VIII-1-89-224 VIII-1-92-82 VIII-1-89-299 VIII-1-95-157 VIII-1-83-02 VIII-1-83-42 VIII-1-83-63 VIII-1-83-152 VIII-1-83-171 VIII-1-83-177 VIII-1-83-180 VIII-1-83-196 VIII-1-83-246 VIII-1-83-268 VIII-1-83-290 VIII-1-83-291 VIII-1-83-320 VIII-1-83-362 VIII-1-86-08 VIII-1-86-177 VIII-1-86-179 VIII-1-83-02 VIII-1-83-11 VIII-1-83-63 VIII-1-83-113 VIII-1-83-124 VIII-1-83-220 VIII-1-83-265 VIII-1-83-267

08-1260 08-1259 BC82-125 BC85-152 BC96-376 BC06-783 BC82-125 BC85-152 BC82-125 BC85-152 BC96-104 BC96-336 BC03-1657 BC83-235 BC87-192 BC90-543 BC91-518 BC00-081 BC01-636 BC02-4115 BC03-454 BC03-455 08-104 BC89-118 BC82-513 BC82-624 BC81-019*, BC83-018 BC96-336 BC82-289 BC90-543 BC92-171 BC91-050 BC96-337, BC96-368 BC81-213 BC82-416 BC82-027 BC83-167 BC83-212 BC83-286 BC83-311 BC83-019 BC83-643 BC84-102 BC84-174 BC84-191 BC84-130 BC83-559 BC85-284 BC87-390 BC87-073 BC81-213 BC82-165 BC82-027 BC83-033 BC82-842 BC83-557 BC84-087 BC84-090

949 952 37 288 706 921 37 288 37 288 681 709 876 132 301 453 518 781 832 857 868 874 943 408 27 29 167

UW-12(c)

UW-12(d)

709 16 453 544 491 710

UW-12(e) UW-13

7 26 36 90 98 100 101 110 139 149 160 161 181 205 216 308 309 7 11 36 66 70 127 148 149

UW-13(a)(2) UW-13(b)(2) UW-13(b)(4) UW-13(b)(4)(b) UW-13(c) UW-13(c)(2) UW-13(d) UW-13(e) UW-13(e)(3) UW-13(e)(4) UW-13(g) UW-13(g)(1) Fig. UW-13.1

(q) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.

Interpretation



Location

Interpretation

Part UW (Cont’d) Fig. UW-13.1 sketch (f)

Fig. UW-13.1 sketch (g) Fig. UW-13.1 sketch (k)

Fig. UW-13.1 sketch (l) Fig. UW-13.1 sketch (m) Fig. UW-13.1 sketch (n) Fig. UW-13.1 ske tches (n) and (o)

Fig. UW-13.2

Fig. UW-13.2 sketches (b) and (c)

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

Fig. UW-13.2 sketch (d)

Fig. UW-13.2 sketch (e) Fig. UW-13.2 sketch (g) Fig. UW-13.2 Fig. UW-13.2 Fig. UW-13.2 Fig. UW-13.2 Fig. UW-13.3

sketch (h) sketch (i) sketch (m) sketch (q)


Fig. UW-13.3 sketch (b)

Fig. UW-13.4 UW-14 UW-14(d) UW-15

UW-15(b) UW-15(c) UW-15(d)

File No.

Page No.

VIII-1-83-132 VIII-1-89-172 VIII-1-92-210

BC82-298 BC90-009 BC94-134

74 429 613


BC90-684 BC81-404 BC91-171 BC92-248 BC01-199 BC06-942 BC87-042 BC96-258 BC96-258 BC82-285 BC99-300 BC82-593

505 33 512 552 808 918 332 702 702 78 766 40

VIII-1-86-202 VIII-1-92-185 VIII-1-01-05 VIII-1-04-42 VIII-1-04-46 VIII-1-07-49 VIII-1-95-08

BC87-408 BC93-650 BC00-502 BC04-1015 BC04-1113 08-888 BC94-221

323 598 791 891 896 941 627

VIII-1-95-139 VIII-1-98-78 VIII-1-01-140 VIII-1-89-158 VIII-1-92-128 VIII-1-98-26 VIII-1-04-05 VIII-1-92-112 VIII-1-89-219 VIII-1-89-285 VIII-1-89-302 VIII-1-01-24 VIII-1-89-227 VIII-1-89-40 VIII-1-98-69 VIII-1-01-42 VIII-1-01-67 VIII-1-95-04 VIII-1-98-34 VIII-1-98-78 VIII-1-95-18 VIII-1-98-78 VIII-1-01-18 VIII-1-01-31 VIII-1-86-05 VIII-1-83-208 VIII-1-83-262 VIII-1-98-46 VIII-1-83-284 VIII-1-89-208 VIII-1-92-192 VIII-1-92-205 VIII-1-92-205R VIII-1-01-44 VIII-1-83-239 VIII-1-95-42 VIII-1-95-151

BC96-354 BC99-359 BC02-2305 BC89-313 BC92-383 BC97-508A BC03-1206 BC92-352 BC88-466 BC91-048 BC90-433 BC01-045 BC90-412 BC87-218 BC99-271 BC01-225 BC01-301 BC94-287 BC98-225 BC99-359 BC92-326 BC99-359 BC00-688 BC01-074 BC85-229 BC83-465 BC84-053 BC98-293 BC84-140 BC90-467 BC93-717 BC93-775 BC93-775* BC01-302 BC83-600 BC94-577 BC96-526

703 764 863 419 572 730 874 561 452 486 492 803 455 360 755 809 819 625 738 764 630 764 800 805 214 115 147 743 157 448 606 611 639 810 135 646 707

Location Part UW (Cont’d) UW-16

Interpretation

File No.

VIII-1-83-160 VIII-1-83-219

BC83-034 BC83-556

94 126


BC85-324 BC84-169 BC88-424 BC96-256

219 260 370 688


BC05-560 BC05-463 BC82-417 BC83-556 BC84-142

904 906 123 126 154


BC90-792 BC91-303 BC93-588 BC00-388 09-1043

481 539 595 789 954


BC82-678 BC87-168 BC01-098 BC85-465

42 297 806 257


BC82-845 BC95-472 BC03-1585 BC93-489 BC81-269

52 669 875 593 32


BC81-661 BC87-254 BC91-080 BC92-459

35 348 556 573

VIII-1-83-284 VIII-1-86-86

BC84-140 BC86-293

157 259

VIII-1-89-192 VIII-1-89-220

BC90-359 BC89-161

436 452

VIII-1-98-29 VIII-1-04-98

BC97-267 BC06-273

731 915

UW-16(f)(3)(a)(3)(a) UW-16(f)(5)

VIII-1-10-03 VIII-1-92-192

09-637 BC93-717

953 606

Fig. UW-16.1

VIII-1-83-13 VIII-1-83-34

BC82-180 BC82-264

12 23

VIII-1-83-76

BC82-678

42

Fig. UW-16 UW-16(b)

UW-16(c)

UW-16(c)(2) UW-16(d) UW-16(d)(1) UW-16(e)(2) UW-16(f)

UW-16(f)(3)(a)

VIII-1-83-275

BC84-129

153

VIII-1-83-274R

BC84-128*

169

VIII-1-86-05

BC85-229

214

VIII-1-86-89

BC84-169

260

VIII-1-98-23

BC97-522

729

VIII-1-01-01

BC00-388

789


VIII-1-83-272

BC84-116

152

Fig. UW-16.1 sketch (d)

VIII-1-92-112

BC92-352

561

Fig. UW-16.1 sketch (g)

VIII-1-89-123

BC87-295

405

VIII-1-10-07

09-1043

954

Fig. UW-16.1 sketch (h)

VIII-1-89-05

BC88-128

344

VIII-1-01-160

02-4124

926

Fig. UW-16.1 sketch (k)

VIII-1-83-402

BC82-402

25

Fig. UW-16.1 sketch (v)

VIII-1-86-61

BC86-212

244

VIII-1-92-28

BC91-530

517

VIII-1-92-170

BC93-489

593

Fig. UW-16.1 sketch (w)

(r) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.




UW-19(c)(2) UW-20 UW-20(a) UW-20(b) UW-20(c) UW-26

UW-26(d)

UW-27 UW-27(a) UW-27(b) UW-28

UW-28(b) UW-28(c)(2) UW-29 UW-29(a) UW-29(d) UW-31 UW-31(b) UW-31(c)

Interpretation

File No.

VIII-1-89-55 VIII-1-89-253 VIII-1-92-143 VIII-1-98-107 VIII-1-04-64 VIII-1-07-71 VIII-1-95-91 VIII-1-89-267 VIII-1-95-91 VIII-1-86-192 VIII-1-89-79 VIII-1-01-142 VIII-1-89-247 VIII-1-89-247R VIII-1-92-167 VIII-1-83-146 VIII-1-86-81 VIII-1-86-141 VIII-1-86-74 VIII-1-83-54 VIII-1-83-295 VIII-1-86-210 VIII-1-89-26 VIII-1-89-32 VIII-1-92-26 VIII-1-83-312 VIII-1-83-312R VIII-1-89-26 VIII-1-89-188 VIII-1-01-51 VIII-1-04-86 VIII-1-83-54 VIII-1-83-147 VIII-1-07-58 VIII-1-83-93 VIII-1-83-331

BC88-392 BC90-484 BC93-105 BC99-608 BC02-4114 08-1286 BC94-664 BC89-253 BC94-664 BC85-094B BC89-027 BC02-2428 BC90-689 BC02-2474* BC93-411 BC80-038C BC86-334 BC87-172 BC86-251 BC81-064 BC84-259 BC87-496 BC88-165 BC88-202 BC91-229 BC84-340 BC84-340* BC88-165 BC88-426C BC01-215 BC04-1348 BC81-064 BC80-173 08-838 BC82-783 BC83-324, BC83-384 BC92-349 BC94-179 BC96-276 08-838 BC86-372 BC86-512 BC88-008 BC01-325 BC85-227 BC86-245 BC86-512 BC87-385 BC88-008 BC90-262 BC89-234 BC99-595 BC03-933 BC82-285 BC99-300 BC01-325 08-1762 BC01-412

VIII-1-92-110 VIII-1-92-214 VIII-1-95-113 VIII-1-07-58 VIII-1-86-104 VIII-1-86-111 VIII-1-86-212 VIII-1-01-85 VIII-1-86-04 VIII-1-86-63 VIII-1-86-111 VIII-1-86-183 VIII-1-86-212 VIII-1-89-179 VIII-1-89-264 VIII-1-98-106 VIII-1-04-07 VIII-1-83-140 VIII-1-98-85 VIII-1-01-85 VIII-1-10-09 VIII-1-01-71

UW-31(d)

UW-32(a) UW-33

UW-33(a)

UW-34

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Page No.


368 466 578 780 901 951 676 479 676 319 381 864 464 861 592 81 256 293 254 31 162 327 355 358 516 178 190 355 435 813 911 31 81 943 55 192

UW-35(a) UW-35(a)(2) UW-35(b) UW-35(d)

UW-37 UW-37(a) UW-38

UW-39 UW-39(b) UW-40

UW-40(a)(3) UW-40(a)(5) UW-40(a)(8)

UW-40(c) UW-40(f)

561 614 688 943 267 275 329 830 214 245 275 311 329 432 478 779 874 78 766 830 955 822

UW-40(f)(5)(a) UW-40(f )(5)(c) UW-40(f )(6) UW-42 UW-46 UW-47 UW-48(d) UW-50

UW-51

Interpretation

VIII-1-83-36 VIII-1-83-137 VIII-1-83-143 VIII-1-83-183 VIII-1-86-63 VIII-1-86-217 VIII-1-89-109 VIII-1-89-297 VIII-1-07-51 VIII-1-92-165 VIII-1-86-39 VIII-1-95-51 VIII-1-89-43 VIII-1-92-151 VIII-1-92-151R VIII-1-92-174 VIII-1-86-58 VIII-1-04-22 VIII-1-83-344 VIII-1-92-27 VIII-1-89-88 VIII-1-95-83 VIII-1-83-255 VIII-1-92-161 VIII-1-83-30 VIII-1-83-315 VIII-1-89-186 VIII-1-89-202 VIII-1-95-116 VIII-1-89-288 VIII-1-89-229 VIII-1-89-317 VIII-1-01-52 VIII-1-07-08 VIII-1-98-11 VIII-1-98-110 VIII-1-92-80 VIII-1-95-96 VIII-1-04-56 VIII-1-95-134 VIII-1-95-37 VIII-1-92-176 VIII-1-83-27R VIII-1-89-179 VIII-1-83-347 VIII-1-83-347 VIII-1-04-86 VIII-1-86-44 VIII-1-92-73 VIII-1-92-204 VIII-1-83-53 VIII-1-83-62 VIII-1-83-85 VIII-1-83-202 VIII-1-83-241 VIII-1-83-272 VIII-1-83-305 VIII-1-86-43 VIII-1-89-292 VIII-1-98-87

File No.

BC82-309 BC82-782 BC82-222 BC83-314 BC86-234 BC88-029 BC89-159 BC91-168 08-114 BC93-397 BC85-610 BC95-046 BC88-080 BC93-114 BC93-114* BC93-604 BC86-200 BC03-1492 BC84-675 BC91-516 BC86-519 BC95-389 BC83-683 BC93-513 BC82-166 BC84-385 BC90-305 BC90-388 BC96-129 BC90-437 BC90-438 BC90-682 BC01-216 BC06-1123, BC06-1124 BC97-275 BC00-082 BC92-167 BC95-164 BC05-093 BC96-255 BC93-735 BC93-641 BC81-100* BC90-262 BC84-589 BC84-589 BC04-1348 BC85-593 BC91-401 BC93-765 BC81-056 BC81-685B BC82-811 BC83-424 BC83-603A BC84-116 BC83-568 BC85-592 BC91-046 BC99-457

(s) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

Page No.

24 76 79 102 245 330 399 490 942 591 234 650 362 582 675 594 243 879 198 516 384 667 144 590 21 179 434 440 689 487 456 498 813 919 719 781 543 677 899 701 644 595 18 432 199 199 911 237 540 610 31 36 51 113 136 152 175 236 489 767


Location

Interpretation

File No.

Page No.

Location

Part UW (Cont’d) UW-51 (Cont’d)

UW-51(a)(1) UW-51(a)(2) UW-51(a)(3) UW-51(a)(3), Winter 1982 Addenda UW-51(b)

UW-52

Interpretation

File No.

Page No.

Part UW (Cont’d) UW-52 (Cont’d)

VIII-1-07-55 VIII-1-89-167 VIII-1-04-21 VIII-1-83-158 VIII-1-86-19 VIII-1-83-156

07-134 BC89-415 BC03-1021 BC83-210 BC85-326 BC83-201

943 428 878 93 220 92

UW-52(c)(3) UW-52(d)(2) UW-52(d)(2)(c) UW-75(c)


BC84-102 BC83-568 BC85-592 BC91-518 BC97-519 08-104 BC85-187 BC95-218 BC82-737 BC98-246 BC95-463 BC83-649 BC98-290 BC96-477 BC95-400 BC91-516 BC84-118

149 175 236 518 728 943 204 662 53 740 669 140 750 726 668 516 152

Statement of Policy

VIII-1-92-76

BC92-152

541

UW-52(b)(1) VIII-1-83-133R VIII-1-86-28 VIII-1-89-251 VIII-1-92-27 VIII-1-92-34 VIII-1-01-158 VIII-1-83-86 VIII-1-83-101 VIII-1-83-141 VIII-1-83-196 VIII-1-83-241

BC82-718* BC85-289 BC90-743 BC91-516 BC91-007 02-3521 BC82-813 BC82-840 BC82-833 BC83-019 BC83-603A

87 224 465 516 519 925 51 58 78 110 136

UW-52(b)(2) UW-52(b)(3) UW-52(c)

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

(t) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS



SUBJECT INDEX

Subject Attachments caps closing plugs couplings drilled holes flanges (see separate listing ) flat heads

head-to-shell

intermediate heads lifting loadings on nonpressure nozzles (see separate listing ) pad type connection pipe pipe pressure pressure gages recording of nonpressure screwed

thermocouple tubesheet welded

Authorized Inspector examination

multiple duplicate vessels National Board Commission Number radiography responsibilities

Interpretation

File No.

Page No.


BC81-301 BC84-071 BC83-544 BC99-599

129 148 125 778



874 913 335 419 505 679 805 914 809 30 544

VIII-1-83-262 VIII-1-89-122 VIII-1-89-215 VIII-1-92-185 VIII-1-83-243 VIII-1-83-70 VIII-1-83-13 VIII-1-83-274R VIII-1-83-358 VIII-1-92-01 VIII-1-01-24 VIII-1-83-55 VIII-1-89-123 VIII-1-89-174 VIII-1-89-192 VIII-1-89-230 VIII-1-89-272 VIII-1-89-285 VIII-1-92-41 VIII-1-92-192 VIII-1-01-01 VIII-1-01-34 VIII-1-01-40

BC84-053 BC86-380 BC90-291 BC93-650 BC83-633 BC82-529 BC82-180 BC84-128* BC85-124 BC90-235 BC01-045 BC81-269 BC87-295 BC90-012 BC90-359 BC90-440 BC90-792 BC91-048 BC91-044 BC93-717 BC00-388 BC01-098 BC01-199

147 405 450 598 137 39 12 169 204 505 803 32 405 430 436 456 481 486 529 606 789 806 808


BC87-079 BC94-288 BC98-241 BC86-522 BC89-039

284 626 739 277 382


BC85-591 BC94-584 BC98-229 BC99-496

236 641 739 773

Subject

Interpretation

Authorized Inspector (Cont’d) surface e xamination VIII-1-86-51 VIII-1-86-51R use of multiple VIII-1-86-72 VIII-1-01-149 verification of computer pro- VIII-1-86-64 grams verification of procedures VIII-1-92-131

Page No.

BC86-086 BC86-086* BC86-230 BC03-458 BC86-236

240 253 248 867 245

BC93-029

573

VIII-1-83-153 VIII-1-83-104

BC83-169 BC79-780

90 60

VIII-1-83-173 VIII-1-83-314 VIII-1-83-173 VIII-1-07-67 VIII-1-83-48 VIII-1-83-310 VIII-1-86-76R VIII-1-89-107 VIII-1-83-128 VIII-1-83-109 VIII-1-07-20

BC83-261 BC84-379 BC83-261 08-1399 BC82-521 BC84-266 BC86-253* BC89-185 BC83-072 BC82-095 07-673

99 179 99 949 28 178 275 392 72 63 929

VIII-1-89-128

BC89-042

408

VIII-1-83-312R VIII-1-86-228 VIII-1-89-103

BC84-340* BC88-083 BC89-125

190 335 391

Burst Test

VIII-1-89-257 VIII-1-95-43

BC90-772 BC94-666

467 646

Calibration

VIII-1-89-294

BC91-056

489

Castings


BC89-228 BC90-003 BC90-388 BC91-230 BC92-098 BC95-050

402 428 440 505 535 653

Certification


BC95-465A BC95-465B BC96-128 BC04-626 04-853

681 693 693 906 927

VIII-1-83-58R

BC81-609*

167

Boilers kettle type reboilers unfired steam Bolting circle center line connections holes

materials

size stress values studs

Braced Surfaces Bracing by non-Certificate Holder filler metals

Clad Construction impact testing

(u) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

File No.


` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Subject Clad Construction (Cont’d) overlays

repairs Clamp Connections design

Interpretation


File No.

BC82-309 BC82-169 BC83-461 BC84-154 BC82-221

Page No.

24 62 114 158 107


BC88-164 BC90-545 BC94-134 BC98-177 BC99-083 BC01-279

354 454 613 738 755 875

locking mechanisms noncircular vessels quick opening

VIII-1-89-200 VIII-1-89-200R VIII-1-83-08 VIII-1-83-363 VIII-1-83-08 VIII-1-86-24 VIII-1-89-48

BC90-325 BC90-325* BC82-066 BC84-643 BC82-066 BC84-600 BC88-212

4 39 440 9 206 9 222 364

Code Cases Coils

VIII-1-98-41 VIII-1-04-78

BC98-327 BC05-463

741 906

Combination Units

VIII-1-07-24 VIII-1-07-28

07-1004 07-291

930 932

fabrication requirements Closures flat circular

Construction economizer pressure vessel Corrosion allowance

coating of welds ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

Covers bolted

channel dished flat

handhole manway spherically dished

Subject

BC03-175 BC03-198

866 866



130 238 359 407 607 689 730 829 847 479 22


BC83-208 BC82-197 BC90-299 BC98-174 BC83-170 BC95-042 BC83-170 BC84-429 BC98-333 BC98-334 BC83-208 BC94-136 BC94-191

98 106 532 737 91 652 91 182 743 744 98 629 626

BC01-351

820

Curvature

VIII-1-92-46

BC91-627

530

Cylinders axial compression

VIII-1-86-02

BC79-696

213

VIII-1-83-163 VIII-1-83-17 VIII-1-89-153 VIII-1-89-246 VIII-1-83-44 VIII-1-89-234 VIII-1-92-148 VIII-1-95-29 VIII-1-92-106 VIII-1-92-199 VIII-1-92-202 VIII-1-95-35 VIII-1-95-80 VIII-1-98-27 VIII-1-98-76 VIII-1-01-76 VIII-1-01-104 VIII-1-83-23 VIII-1-83-70 VIII-1-83-213 VIII-1-83-322 VIII-1-95-12 VIII-1-95-45 VIII-1-95-47 VIII-1-95-148 VIII-1-01-47 VIII-1-01-54 VIII-1-01-75 VIII-1-04-36 VIII-1-04-80 VIII-1-07-35 VIII-1-92-91 VIII-1-92-118 VIII-1-98-56 VIII-1-04-39 VIII-1-04-59 VIII-1-89-263 VIII-1-92-179 VIII-1-86-185 VIII-1-89-177 VIII-1-92-123 VIII-1-95-76 VIII-1-07-65 VIII-1-83-266 VIII-1-89-111 VIII-1-92-29 VIII-1-98-96 VIII-1-01-48 VIII-1-86-34 VIII-1-86-92 VIII-1-89-214 VIII-1-92-105 VIII-1-83-112 VIII-1-83-259 VIII-1-92-29

BC81-576 BC82-238 BC89-281 BC90-650 BC82-509 BC90-497 BC93-421 BC94-502 BC92-304 BC93-446 BC94-036 BC93-524 BC94-351 BC98-062 BC99-280 BC01-379 BC01-793 BC82-291 BC82-529 BC83-075 BC84-411 BC94-056 BC94-671 BC94-412 BC96-522 BC97-401 BC01-224 BC01-377 BC04-231 BC05-672 07-139 BC92-239 BC92-104 BC98-367 BC02-2682 BC05-078 BC89-129 BC93-590 BC87-398 BC90-021 BC92-454 BC94-417 08-1042 BC84-089 BC89-170 BC91-466 BC98-292 BC01-194 BC85-503 BC86-255 BC90-498 BC92-295 BC83-032 BC84-050 BC91-466

94 13 417 463 27 458 580 641 559 608 609 643 666 730 763 826 838 16 39 124 182 628 647 648 706 811 814 826 888 900 934 554 564 751 890 900 477 596 311 431 571 664 945 148 399 517 775 811 226 261 450 559 64 146 517

Data Report Forms base materials creation

distribution

edition of Code entries

flanges nonpressure attachments

remarks

sign-off U-1

VIII-1-83-130

BC81-717

U-1A

U-2

73

(v) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.

VIII-1-01-69

U-3 Creep Rate average stress

File No.

Cryogenic Vessels

partial VIII-1-01-147 VIII-1-01-146

Interpretation



Subject

Interpretation

Data Report Forms (Cont’d) UV-1 VIII-1-04-49 year built VIII-1-83-317 Design formulas in Appendix 1

methods

pressure stress welded joints Dimpled Assemblies

File No.

Page No.

BC04-1276 BC84-412

897 180


BC89-218 BC89-151 BC93-373 BC94-280 BC00-131 08-637 08-888 BC95-172 BC01-405 BC01-380 08-1081 BC95-049

412 409 579 631 794 941 941 655 863 821 942 651


BC90-772 BC90-300 BC91-045 BC91-047 BC92-010 BC92-345 BC93-741 BC94-631 BC99-456 BC99-608 BC01-777 BC03-1476

467 481 488 491 557 558 605 630 779 780 901 911

Subject

VIII-1-98-63

BC97-282

753

Edition of Code

VIII-1-95-29 VIII-1-01-72

BC94-502 BC01-570

641 822


BC83-007 BC98-172a 01-153 BC84-139 BC00-591 BC94-410 BC00-083 BC83-113 02-3319 BC84-115 BC83-317 BC83-226 BC80-198 BC85-283 BC82-285 BC82-308 BC03-1845

109 765 928 156 846 629 782 97 937 192 103 111 18 215 78 39 883

Extreme Fiber Elongation heat treatment

VIII-1-83-12

BC82-170

11

Factors and Dimensions C , factor E , definition of G, dimension

VIII-1-83-15 VIII-1-83-113 VIII-1-89-35

BC82-206 BC83-033 BC88-250

13 64 359

External Pressure boundary calculations

conical shell reducer section flanges heads MAWP for tubes nozzle reinforcement openings piping pressure relief devices proof test stamping stiffening rings

Page No.


26 66 66 125 66 77 98 100 110 263 331 55 63 26

Fatigue curves

VIII-1-89-12

BC87-204

348

VIII-1-89-223 VIII-1-95-26 VIII-1-95-127 VIII-1-95-127R VIII-1-01-53 VIII-1-04-09

BC90-535 BC94-106 BC96-128 BC96-128* BC01-222 BC03-1491

453 639 693 715 813 875



38 99 731 846 915 400 99 452 556 573 99 441 370 157

VIII-1-83-96 VIII-1-83-21 VIII-1-86-171 VIII-1-83-02 VIII-1-83-23 VIII-1-83-91 VIII-1-83-154 VIII-1-83-172 VIII-1-83-176 VIII-1-83-242 VIII-1-83-340 VIII-1-86-117 VIII-1-89-15 VIII-1-89-146 VIII-1-95-73 VIII-1-95-141 VIII-1-01-78 VIII-1-86-86

BC82-801 BC82-274 BC85-177 BC81-213 BC82-291 BC82-738 BC83-170 BC83-256 BC83-285 BC83-604 BC84-656 BC87-006 BC88-077 BC89-251 BC95-313 BC96-379 BC01-407 BC86-293

56 15 306 7 16 54 91 98 100 136 196 278 349 415 663 704 827 259

Field Sites

Fittings ANSI B16.9

lugs piping

pressure–temperature ratings small

Flanges attached to tubesheet attachments bar bolted

cast iron

(w) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

File No.

Factors and Dimensions (Cont’d) go , dimension VIII-1-83-43 VIII-1-83-115 VIII-1-83-115 g1 , dimension VIII-1-83-216 h, dimension VIII-1-83-115 joint efficiency factors VIII-1-83-139 VIII-1-83-171 VIII-1-83-177 VIII-1-83-196 VIII-1-86-96 VIII-1-86-218 ligament efficiency VIII-1-83-94 s, dimensions VIII-1-83-110 stress reduction VIII-1-83-42

attachment Direct Fired

Interpretation


` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Subject Flanges (Cont’d) design

Interpretation

File No.

Page No.

VIII-1-83-39

BC82-398

25

VIII-1-83-216

BC83-476

125

VIII-1-92-90

BC92-226

553

VIII-1-89-323

BC90-192

569

VIII-1-92-121

BC92-299

570

VIII-1-95-38

BC94-366

645

VIII-1-95-69

BC95-234

661

VIII-1-95-72

BC95-312

662

VIII-1-98-72

BC99-292

756

VIII-1-01-20

BC00-696

801

VIII-1-01-59

BC01-296

815

VIII-1-07-34

03-1834

933

VIII-1-07-45

08-362

940

VIII-1-07-52

08-716

942

external pressure

VIII-1-95-16

BC94-410

629

factors

VIII-1-07-07

BC06-1047

918

ferritic

VIII-1-92-63

BC92-075

536

VIII-1-01-114

BC01-606

846

flat face

VIII-1-89-125

BC88-162

406

VIII-1-01-18

BC00-688

800

forged threaded

VIII-1-83-19

BC82-258

14

forgings

VIII-1-92-180

BC93-627

596

gasket

VIII-1-83-297

BC82-122

171

VIII-1-83-303

BC83-359

174

VIII-1-86-173

BC86-247

306

VIII-1-92-60

BC92-077

535

VIII-1-04-91

BC05-1667

913

VIII-1-83-39

BC82-398

25

VIII-1-89-56

BC88-395

368

girth

VIII-1-83-205

BC83-461

114

hubbed

VIII-1-86-25

BC85-464

222

VIII-1-86-25R

BC85-464*

253

VIII-1-89-185

BC90-243

434

VIII-1-01-67

BC01-301

819

VIII-1-04-67

BC03-1634

902

VIII-1-07-17

01-648

928

VIII-1-83-21

BC82-274

VIII-1-83-91

BC82-738

54

VIII-1-86-69

BC85-228

247

VIII-1-86-138

BC87-120

288

impact testing

VIII-1-98-10

BC97-274

719

integral hub

VIII-1-83-115

BC81-514

66

VIII-1-89-24

BC88-143

354

VIII-1-83-356

BC85-074

203

VIII-1-83-25

BC82-301

17

VIII-1-83-43

BC82-508

26

VIII-1-01-38

BC01-121

808

VIII-1-01-132

BC02-2920

856

VIII-1-04-42

BC04-1015

891

VIII-1-83-244

BC83-638

138

VIII-1-89-17

BC88-087

350

gasket factor

hubless

integral type

long weld neck

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Subject Flanges (Cont’d) loose type hubbed

File No.

Page No.

VIII-1-83-21 VIII-1-92-62 VIII-1-07-59 VIII-1-92-57 VIII-1-98-51 VIII-1-83-43 VIII-1-86-70 VIII-1-86-150 VIII-1-86-95 VIII-1-92-37 VIII-1-92-220 VIII-1-01-45 VIII-1-98-95 VIII-1-01-45 VIII-1-04-30 VIII-1-83-225 VIII-1-83-292 VIII-1-92-128 VIII-1-95-24 VIII-1-98-26 VIII-1-98-120 VIII-1-07-37 VIII-1-83-303 VIII-1-83-39 VIII-1-86-196 VIII-1-01-136 VIII-1-89-258 VIII-1-07-12 VIII-1-83-284 VIII-1-86-54 VIII-1-83-39 VIII-1-83-235 VIII-1-89-205 VIII-1-07-69 VIII-1-86-216 VIII-1-83-131 VIII-1-92-50 VIII-1-95-140 VIII-1-86-84 VIII-1-89-249 VIII-1-98-20

BC82-274 BC92-099 08-1302 BC92-053 BC98-288 BC82-508 BC85-230 BC86-194 BC86-267 BC91-600 BC94-109 BC01-303 BC98-230 BC01-303 BC03-623 BC79-323 BC84-192 BC92-383 BC94-591 BC97-508A BC00-268 03-1846 BC83-359 BC82-398 BC86-527 BC01-329 BC90-773 BC06-1122 BC84-140 BC86-113 BC82-389 BC83-590 BC90-436 08-1562 BC88-028 BC82-209 BC90-788 BC96-373 BC86-286 BC99-653 BC97-512

15 536 944 534 744 26 248 297 262 520 616 810 775 810 886 129 161 572 632 730 785 937 174 25 320 862 468 920 157 241 25 133 441 950 330 73 532 704 258 464 728

VIII-1-86-53 VIII-1-83-311

BC86-106 BC84-313

241 178


BC89-275 BC94-669 BC98-062 BC01-196

417 647 730 812


BC03-762 BC82-403 BC94-131 BC96-352

917 88 628 704

Glass-Lined Vessels

VIII-1-95-116 VIII-1-98-91

BC96-129 BC99-478

689 773

Hand Holes

VIII-1-95-115

BC96-273

689

loose type without hub nondestructive examination optional type

plate material

pressure–temperature ratings raised-face blind reverse

seal-welded seating stress self-energizing gaskets slip-on slotted bolt holes socket weld Teflon O-ring thickness

threaded bolts weld neck

welded to nozzles welds

Forgings endcaps hydrostatic testing after grinding vessels

15

Interpretation

Forming cold cold blows half-pipe jacket shell sections and heads

(x) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT


Subject

Interpretation

Headers box type

Heads attachment of

cast iron center line cold spun flat

floating formed

heat treatment hemispherical spherical identification and marking openings

partial data reports pressure on concave side pressure on convex side radius repairs seamless

seamless hemispherical seamless with skirt spherical portion of ellipsoidal spherically dished testing thickness

Page No.

VIII-1-83-03 VIII-1-83-210

BC81-260 BC78-640

7 122

VIII-1-92-86 VIII-1-92-210 VIII-1-95-135 VIII-1-07-06 VIII-1-83-172 VIII-1-89-78 VIII-1-83-223 VIII-1-83-224 VIII-1-83-181 VIII-1-83-327 VIII-1-83-339 VIII-1-83-355 VIII-1-83-359 VIII-1-89-206 VIII-1-92-195 VIII-1-98-03 VIII-1-98-21 VIII-1-01-107 VIII-1-01-109 VIII-1-04-62 VIII-1-07-02 VIII-1-83-157 VIII-1-83-179 VIII-1-89-121 VIII-1-89-184 VIII-1-89-209 VIII-1-92-06 VIII-1-92-46 VIII-1-92-79 VIII-1-92-160 VIII-1-95-132 VIII-1-98-38 VIII-1-01-57 VIII-1-89-74 VIII-1-83-177 VIII-1-83-01 VIII-1-83-14 VIII-1-95-94 VIII-1-04-66 VIII-1-89-96 VIII-1-83-198 VIII-1-83-215 VIII-1-86-03 VIII-1-83-81 VIII-1-86-112 VIII-1-89-108 VIII-1-83-02 VIII-1-83-86 VIII-1-86-134 VIII-1-83-145 VIII-1-83-182 VIII-1-83-149

BC92-248 BC94-137 BC96-258 BC06-942 BC83-256 BC89-018 BC83-582 BC83-586 BC83-315 BC84-592 BC84-635 BC85-066 BC85-138 BC90-439 BC93-670 BC96-105 BC97-514 BC01-651 BC01-801 BC04-517 BC06-667 BC83-207 BC83-306 BC88-121 BC90-193 BC90-482 BC91-270 BC91-627 BC92-150 BC93-486 BC96-351 BC98-176 BC01-288 BC88-472 BC83-286 BC81-195 BC82-191 BC95-473 BC03-1098 BC89-084 BC83-139 BC83-404 BC85-223 BC82-729 BC86-513 BC89-188 BC81-213 BC82-813 BC87-112 BC83-200 BC83-312 BC83-036

552 613 702 918 98 381 128 129 102 184 195 203 204 442 607 716 728 839 840 901 917 92 101 404 433 448 506 530 542 589 695 740 815 380 100 6 12 677 902 388 111 125 214 43 276 393 7 51 286 80 102 88


BC92-419 08-1396 BC88-472 BC82-294 BC83-159

583 949 380 38 75

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


File No.

Subject

Interpretation

File No.

Page No.

Heads (Cont’d) thickness (Cont’d)

thickness for convex side tolerances

toriconical torispherical formed

weld caps welded

Heat Exchangers air cooled

double pipe examination exemptions finned finned tube floating head internal failures permitted materials plate type

pressure load scope shell and tube

tubes

tubesheet Heat Treatment cold formed parts conditions elliptical manway rings extreme fiber elongation

fittings flanges formed heads


BC82-417 BC86-069 BC87-073 BC87-245 BC92-304 BC93-718 BC82-165 BC83-024 BC89-234 BC90-727 BC94-474 BC83-212 BC86-254 BC86-300 BC86-417 BC87-302 BC88-389 BC83-266 BC83-262 BC83-019 BC87-475

123 239 309 310 559 615 11 131 478 519 627 98 255 260 307 307 360 99 93 110 321

VIII-1-83-03 VIII-1-01-142 VIII-1-98-74 VIII-1-01-80 VIII-1-83-50 VIII-1-89-41 VIII-1-98-01 VIII-1-07-30 VIII-1-83-179 VIII-1-89-84 VIII-1-83-60 VIII-1-07-23 VIII-81-89R VIII-1-86-36 VIII-1-07-73 VIII-1-98-77 VIII-1-89-59 VIII-1-04-104 VIII-1-83-232 VIII-1-04-68 VIII-1-04-87 VIII-1-10-10 VIII-1-10-12 VIII-1-83-188 VIII-1-83-293 VIII-1-89-82 VIII-1-04-74 VIII-1-04-99

BC81-260 BC02-2428 BC99-269 BC01-411 BC82-624 BC88-015 BC96-536 07-1370 BC83-306 BC89-009 BC82-659 07-952 BC81-258 BC85-599 08-948 BC99-363 BC88-422 04-010 BC83-355 BC03-1826 BC05-1566 09-586 09-594 BC81-443 BC84-193 BC89-056 BC05-459 BC06-423

7 864 757 828 29 361 716 946 101 383 35 930 6 233 952 763 369 928 132 903 912 956 956 105 161 382 905 915


BC85-319 BC88-434 BC84-601 BC82-587 BC82-798 BC84-601 BC89-224 BC82-549 BC86-068 BC94-684

218 532 194 40 61 194 412 69 239 649

(y) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT


Subject Heat Treatment (Cont’d) hot formed parts

local heating normalizing

normalizing/quenching nozzle necks P-No. 1 materials

Interpretation

VIII-1-86-27 VIII-1-86-27R VIII-1-83-353 VIII-1-89-317 VIII-1-83-06 VIII-1-81-116 VIII-1-86-37 VIII-1-89-19 VIII-1-89-53 VIII-1-89-69 VIII-1-92-39 VIII-1-83-13 VIII-1-89-162 VIII-1-83-12 VIII-1-86-48 VIII-1-89-314 VIII-1-92-59

P-No. 3, 4, and 5 materials postforming postweld (see separate listing ) rate VIII-1-92-66 test specimens VIII-77-33R VIII-1-01-73 VIII-1-01-101 thermocouples VIII-1-98-11 Hydrostatic Testing after grinding before final welding

chambered vessels closures completed vessels

contents of water destructive

examination ferritic steels gas leak testing interconnected vessels metal temperature monitoring painting of vessels pressurization

shell thickness single wall vessels stress values

VIII-1-83-311 VIII-1-83-137 VIII-1-89-51 VIII-1-86-71 VIII-1-89-48 VIII-1-89-27 VIII-1-89-27R VIII-1-89-245 VIII-1-89-281 VIII-1-92-65 VIII-1-92-84 VIII-1-98-45 VIII-1-01-27 VIII-1-83-108 VIII-1-86-137 VIII-1-86-152 VIII-1-95-11 VIII-1-86-122 VIII-1-83-118 VIII-1-01-26 VIII-1-83-301 VIII-1-89-211 VIII-1-04-45 VIII-1-01-88 VIII-1-86-66 VIII-1-92-125 VIII-1-92-204 VIII-1-95-27 VIII-1-95-64 VIII-1-95-93 VIII-1-01-02 VIII-1-01-55 VIII-1-83-287 VIII-1-92-115 VIII-79-13R

File No.

Page No.

BC85-140 BC85-140* BC85-025 BC90-682 BC81-660 BC81-559 BC85-606 BC88-120 BC88-387 BC88-193 BC91-565 BC82-180 BC89-375 BC82-170 BC86-068 BC90-483 BC91-289

223 549 202 498 8 66 233 352 367 378 528 12 421 11 239 497 535

BC92-054 NA BC01-287 BC01-341 BC97-275

537 789 825 837 719

BC84-313 BC82-782 BC88-363 BC85-329 BC88-212 BC88-175 BC88-175* BC90-649 BC90-787 BC92-124 BC92-220 BC98-245 BC01-092 BC80-053 BC87-117 BC87-164 BC94-564 BC86-505 BC82-397 BC01-81 BC83-308 BC90-480 BC04-1070 BC01-635 BC86-238 BC92-458 BC93-765 BC94-414 BC95-172 BC95-420 BC00-393 BC01-226 BC84-154 BC92-389 BC78-847*, BC81-433*

178 76 366 248 364 355 356 463 485 537 551 742 804 62 287 298 628 280 67 803 173 449 895 831 246 571 610 640 655 676 789 814 158 562 5

Subject

Interpretation

File No.

Hydrostatic Testing (Cont’d) stress values (Cont’d)

VIII-1-83-128 VIII-1-89-287 VIII-1-01-77 temperature recording VIII-1-98-86 threaded fitting VIII-1-01-127 volumetric expansion method VIII-1-89-57 VIII-1-89-134 with pneumatic testing VIII-1-07-32

BC83-072 BC89-319 BC01-406 BC99-346 BC02-105a BC88-412 BC89-190 07-470

72 487 827 766 850 368 410 933

Interpretation Statement in Code

VIII-1-95-159

BC96-134

715

VIII-1-86-208 VIII-1-89-217 VIII-1-92-126 VIII-1-95-68 VIII-1-01-06 VIII-1-01-25 VIII-1-86-231 VIII-1-89-290 VIII-1-83-58R VIII-1-89-16 VIII-1-89-23 VIII-1-89-52 VIII-1-89-273 VIII-1-89-91 VIII-1-89-279 VIII-1-89-248 VIII-1-89-274 VIII-1-92-93 VIII-1-92-98 VIII-1-92-122 VIII-1-92-134 VIII-1-92-142 VIII-1-92-144 VIII-1-92-187 VIII-1-92-218 VIII-1-92-219 VIII-1-95-28 VIII-1-95-54 VIII-1-95-111 VIII-1-95-160 VIII-1-98-93 VIII-1-98-98 VIII-1-01-36 VIII-1-01-37 VIII-1-01-86 VIII-1-07-31 VIII-1-95-129 VIII-1-89-76 VIII-1-92-157 VIII-1-98-13 VIII-1-98-39 VIII-1-01-48 VIII-1-89-216 VIII-1-83-209 VIII-1-83-263 VIII-1-83-126 VIII-1-83-127

BC87-429 BC90-496 BC93-140 BC95-233 BC00-503 BC01-056 BC88-117 BC90-342 BC81-609* BC88-081 BC88-142 BC88-375 BC90-770 BC89-074 BC90-771 BC90-690 BC90-861 BC90-247 BC92-319 BC92-406 BC92-455 BC93-104 BC93-349 BC93-683 BC93-777A BC94-073 BC94-470 BC93-438 BC96-246 BC96-378 BC99-565 BC99-596 BC01-105 BC01-106 BC01-403 06-1121 BC96-372 BC89-005 BC93-439 BC96-342 BC98-286 BC01-194 BC90-399 BC83-537 BC84-057 BC83-073 BC83-083

326 451 572 661 791 803 337 488 167 350 354 366 482 386 484 464 482 554 556 570 574 578 579 599 616 616 640 651 687 725 774 776 807 807 830 932 694 380 584 725 740 811 451 116 147 71 71

Impact Testing absorbed energy attachments

base materials bolting material Charpy clad construction ERW pipe electrodes exemptions

filler metal flanges

heat treatment hydrostatic test temperature location of specimens low temperature service

(z) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.


` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Subject

Interpretation

Impact Testing (Cont’d) low temperature service (Cont’d) VIII-1-83-279 VIII-1-86-40 VIII-1-86-123 VIII-1-86-206 VIII-1-89-295 VIII-1-92-64 materials VIII-1-83-73 VIII-1-83-117 VIII-1-89-105 VIII-1-89-141 VIII-1-89-190 VIII-1-89-199 VIII-1-92-103 VIII-1-92-135 VIII-1-98-50 VIII-1-98-100 VIII-1-01-56 VIII-1-07-25 VIII-1-07-38 minimum design metal VIII-1-86-230 temperature VIII-1-89-21 VIII-1-89-155R VIII-1-89-239 VIII-1-89-267 VIII-1-89-268 VIII-1-89-270 VIII-1-89-322 VIII-1-95-15 VIII-1-95-85 VIII-1-01-121 number of specimens VIII-1-89-21 VIII-1-04-103 production VIII-1-86-130 VIII-1-92-181 VIII-1-95-06 VIII-1-95-102 VIII-1-95-103 VIII-1-95-155 VIII-1-98-40 VIII-1-01-35 VIII-1-01-93 VIII-1-01-110 repairs VIII-1-89-42 retesting VIII-1-83-276 VIII-1-95-20 rings VIII-1-89-225 small vessels VIII-1-89-321 specimens VIII-1-98-114 VIII-1-04-34 testing temperature VIII-1-86-14 VIII-1-89-166 VIII-1-01-19

test plates

thickness


--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


File No.

Page No.

Subject

Interpretation

File No.

Page No.

Impact Testing (Cont’d) thickness (Cont’d)

BC83-318 BC85-195 BC87-074 BC87-069 BC91-083 BC92-102 BC82-663 BC82-305 BC89-158 BC89-229 BC90-261 BC90-314 BC92-343 BC92-456 BC98-425 BC99-598 BC01-285 07-725 07-612 BC88-086

155 234 280 325 490 536 40 67 392 413 436 439 558 575 744 777 814 931 938 336

BC88-134 BC89-312* BC89-162 BC89-253 BC90-225 BC90-295 BC90-683 BC94-186 BC95-397 BC02-2427 BC88-134 03-1651 BC87-046 BC93-629 BC94-292 BC96-098 BC96-201 BC96-409 BC98-227 BC01-104 BC01-647 BC01-843 BC88-071 BC84-131 BC94-496 BC90-544 BC90-441 BC93-751 BC04-056 BC85-294 BC89-414 BC00-691 (BC00-708) BC92-169 BC92-334 BC93-638 BC94-072 BC95-157 BC90-726

353 418 460 479 480 481 551 629 668 848 353 927 284 596 626 679 680 709 741 807 834 840 361 153 631 454 500 783 887 218 427 800

VIII-1-95-62 VIII-1-98-05 VIII-1-01-84 VIII-1-83-08 VIII-1-83-222 VIII-1-89-52 VIII-1-83-08 VIII-1-83-222 VIII-1-83-222 VIII-1-89-68 VIII-1-89-130 VIII-1-89-218 VIII-1-89-240 VIII-1-01-46 VIII-1-83-250 VIII-1-89-322 VIII-1-92-124 VIII-1-92-129 VIII-1-92-173 VIII-1-92-175 VIII-1-92-221 VIII-1-95-158 VIII-1-98-52

BC95-161 BC96-257 BC01-607 BC82-066 BC83-580 BC88-375 BC82-066 BC83-580 BC83-580 BC88-176 BC89-127 BC90-520 BC89-226 BC01-192 BC83-652A BC90-683 BC92-457 BC92-404 BC93-591 BC93-638 BC94-110 BC97-254 BC98-086

654 717 830 9 128 366 9 128 128 377 408 451 460 810 141 551 571 573 594 594 617 710 749

VIII-1-01-06 VIII-1-01-64

BC00-503 BC01-317

791 817

Indications acceptance of

VIII-1-07-33

07-1624

933

Indicators telltale

VIII-1-86-12

BC85-290

217

VIII-1-83-201 VIII-1-89-146 VIII-1-92-04 VIII-1-83-264 VIII-1-83-336 VIII-1-95-46 VIII-1-04-15 VIII-1-95-32 VIII-1-95-32R VIII-1-04-15 VIII-1-07-44

BC83-420 BC89-251 BC91-283 BC84-071 BC84-599 BC94-679 BC03-1295 BC94-589* BC94-589 BC03-1295 08-105

112 415 506 148 194 648 876 642 661 878 940

VIII-1-04-25

BC04-156

883

VIII-1-89-124 VIII-1-89-165 VIII-1-89-241 VIII-1-89-265 VIII-1-89-278 VIII-1-92-12 VIII-1-92-23 VIII-1-92-77 VIII-1-92-77R VIII-1-92-217 VIII-1-95-149

BC88-139 BC89-413 BC89-237 BC89-239 BC90-747 BC91-432 BC91-433 BC91-629 BC91-629* BC93-764 BC96-478

406 427 461 479 483 509 514 542 549 615 707

Type 304

Type 304L Type 316 welded pipe weld metal

weld overlays weld procedures

welds with welding consumables

Inspection exemptions materials

openings

repairs

Internal Pressure formed heads Jacketed Vessels

543 560 594 611 653 494

(aa) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT


Subject

Interpretation

File No.

Page No.

Jacketed Vessels (Cont’d)

half-pipe Joints brazed categories

circumferential corner

efficiency factors ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

expansion

VIII-1-04-105 VIII-1-92-109

04-1530 BC92-344

928 560

VIII-1-86-08 VIII-1-83-34 VIII-1-83-160 VIII-1-83-177 VIII-1-83-182 VIII-1-83-246 VIII-1-86-180 VIII-1-86-202 VIII-1-89-05 VIII-1-89-33 VIII-1-92-30 VIII-1-92-30R VIII-1-92-107 VIII-1-92-158 VIII-1-95-04 VIII-1-01-63 VIII-1-01-120 VIII-1-83-273 VIII-1-04-14 VIII-1-83-161 VIII-1-83-195 VIII-1-86-111 VIII-1-89-40 VIII-1-89-219 VIII-1-89-227 VIII-1-95-139 VIII-1-83-139 VIII-1-83-152 VIII-1-83-171 VIII-1-83-196 VIII-1-83-265 VIII-1-83-268 VIII-1-83-254R VIII-1-83-320 VIII-1-83-355 VIII-1-86-153 VIII-1-86-190 VIII-1-89-14 VIII-1-89-97 VIII-1-89-144 VIII-1-89-150 VIII-1-89-201 VIII-1-92-55 VIII-1-92-97 VIII-1-92-138 VIII-1-95-40 VIII-1-95-42 VIII-1-01-89 VIII-1-01-135 VIII-1-04-64 VIII-1-04-101 VIII-1-83-54 VIII-1-83-125 VIII-1-83-319 VIII-1-86-184 VIII-1-89-11 VIII-1-92-78

BC85-284 BC82-264 BC83-034 BC83-286 BC83-312 BC83-643 BC87-203 BC87-408 BC88-128 BC88-245 BC91-468 BC91-468* BC92-317 BC93-460 BC94-287 BC01-315 BC02-2681 BC84-118 BC03-1657 BC83-268 BC83-007 BC86-512 BC87-218 BC88-466 BC90-412 BC96-354 BC83-132 BC83-167 BC83-212 BC83-019 BC84-087 BC84-102 BC83-664* BC84-130 BC85-066 BC87-166 BC87-428 BC87-297 BC89-085 BC89-240 BC89-331 BC90-326 BC91-453 BC92-310 BC93-110 BC94-569 BC94-577 BC01-636 BC02-4115 BC02-4114 BC05-1574 BC81-064 BC82-863 BC83-223C BC87-387 BC87-198 BC92-148

216 23 94 100 102 139 309 323 344 358 517 623 560 584 625 817 848 152 876 94 109 275 360 452 455 703 77 90 98 110 148 149 168 181 203 299 314 349 388 414 420 440 533 556 576 645 646 832 857 901 916 31 70 181 311 347 542

Subject

Interpretation

File No.

Joints (Cont’d) expansion (Cont’d)

VIII-1-95-154 VIII-1-07-03 finished VIII-1-89-297 lap joint stub ends VIII-1-98-07 longitudinal VIII-1-83-273 longitudinal with backing bar VIII-1-83-187 offset VIII-1-86-183 tapered transitions VIII-1-86-05 VIII-1-86-221 tubesheet VIII-1-83-56 tube-to-tubesheet VIII-1-83-10 VIII-1-86-227 VIII-1-01-62 types VIII-1-83-124 VIII-1-83-220 VIII-1-83-267 VIII-1-83-290 VIII-1-86-10 VIII-1-89-04 VIII-1-89-64 VIII-1-89-67 VIII-1-01-133 welded VIII-1-04-46 VIII-1-07-05

BC96-525 BC06-948 BC91-168 BC96-341b BC84-118 BC79-246 BC87-385 BC85-229 BC87-042 BC81-403 BC82-164 BC88-082 BC01-313 BC82-842 BC83-557 BC84-090 BC84-174 BC85-286 BC88-124 BC88-429 BC88-163 BC02-4004 BC04-1113 BC05-1586

708 917 490 718 152 105 311 214 332 33 10 335 816 70 127 149 160 216 344 371 377 856 896 918

Lethal Service


BC91-455 BC92-246 BC92-352 BC93-684 BC94-180 BC94-221 BC97-522 BC00-100 BC00-242 BC00-598 BC02-106a 08-1068

515 554 561 604 613 627 729 783 785 794 847 944

Liquid Penetration Examination ac ceptance criteria VIII-1-83-298 VIII-1-89-157 VIII-1-92-171 clad material VIII-1-83-191 corner joints VIII-1-86-135 flat plate VIII-1-89-180 relevant indication VIII-1-83-306 requirements VIII-1-04-02 rolled plate VIII-1-83-144


172 419 593 107 286 432 176 873 80


BC04-325 BC89-064 BC95-172 BC01-592 BC04-324 BC81-717 BC93-621 BC88-137

885 383 655 829 884 73 598 345

VIII-1-01-141

BC02-2426

864

Loads abnormal pressures combination

impact operating photoelastic strain measurement shear

(ab) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.



Subject Loads (Cont’d) static head

Interpretation

File No.

Page No.


BC87-313 BC01-591 BC87-160 BC89-238 BC95-310

314 829 347 413 667

VIII-1-92-186

BC93-652

598

Magnetic Particle Examination acceptance criteria VIII-1-83-298 VIII-1-92-213 corner joints VIII-1-86-135 linear discontinuities VIII-1-83-41 relevant indication VIII-1-83-306 VIII-1-95-51 rolled plate VIII-1-83-144

BC82-827 BC94-003 BC87-113 BC82-409 BC83-592 BC95-046 BC83-198

172 614 286 25 176 650 80

VIII-1-92-22

BC91-267

514

VIII-1-95-32 VIII-1-01-68

BC94-589 BC01-348

642 819

Manufacturer’s Standard

VIII-1-92-54 VIII-1-07-39

BC91-402 07-394

533 939

Manways

VIII-1-95-66 VIII-1-01-122 VIII-1-01-148

BC95-067 BC02-2562 BC03-176

656 849 867

unknown

Subject

Manufacturer Responsibilities

Markings abbreviations

VIII-1-86-108 VIII-1-86-110 arrangement VIII-1-83-328 covers VIII-1-83-170 external pressure VIII-1-04-84 general VIII-1-89-183 VIII-1-89-193 VIII-1-89-210 VIII-1-89-210R VIII-1-89-224 VIII-1-89-238 VIII-1-92-113 VIII-1-98-30 VIII-1-01-129 VIII-1-04-32 geographical location VIII-1-86-93 heads VIII-1-83-01 VIII-1-83-145 high volume produced vessels VIII-1-86-47 identification VIII-1-83-19 VIII-1-86-101 VIII-1-86-105 material VIII-1-95-57 VIII-1-95-61 nameplate VIII-1-95-31 VIII-1-95-55 VIII-1-95-120 VIII-1-98-94 VIII-1-04-88 pressure part VIII-1-92-145 VIII-1-95-70

BC86-448 BC86-202 BC82-284 BC83-208 BC02-4219 BC90-239 BC90-393 BC90-418 BC90-418* BC90-543 BC90-464 BC92-355 BC97-405 BC02-2791 BC03-777 BC86-256 BC81-195 BC83-200 BC85-607 BC82-258 BC86-320 BC86-379 BC95-156 BC95-158 BC94-587 BC93-482 BC96-216 BC99-574 BC05-1589 BC93-113 BC95-173

Page No.

pressure–temperature

rupture disks seamless head with welded plug size of welding material welding process

Materials additional elements after brazing alloy steel bars ASTM Specification

backing strips base /weld metal bolted flange bolting

bored rolled bar bronze castings calculated stress case iron

268 269 190 98 911 433 437 448 475 453 459 562 737 855 886 262 6 80 238 14 265 267 652 653 642 651 691 774 912 579 662

certification

combination controlled-rolled plate covers dual certification

ERW Pipe

external pressure chart reference galvanized hardness testing identification

VIII-1-01-50 VIII-1-01-75 VIII-1-83-300 VIII-1-86-223 VIII-1-92-40 VIII-1-01-17 VIII-1-01-21 VIII-1-04-50 VIII-1-86-22


812 826 173 333 528 800 801 897 221


BC86-258 BC84-674 BC96-130 BC03-454

255 197 690 868

VIII-1-98-70 VIII-1-83-299 VIII-1-83-37 VIII-1-83-164 VIII-1-92-100 VIII-1-86-116 VIII-1-83-163 VIII-1-83-91 VIII-1-83-48 VIII-1-83-260 VIII-1-83-310 VIII-1-86-75 VIII-1-86-128 VIII-1-83-121R VIII-1-92-87 VIII-1-86-91 VIII-1-86-152 VIII-1-86-197 VIII-1-83-364 VIII-1-86-38 VIII-1-86-187 VIII-1-89-07 VIII-1-89-28 VIII-1-89-60 VIII-1-92-149 VIII-1-07-46 VIII-1-89-316 VIII-1-86-220 VIII-1-83-170 VIII-1-86-118 VIII-1-89-65 VIII-1-89-269 VIII-1-92-166 VIII-1-83-77 VIII-1-83-77R VIII-1-86-32 VIII-1-95-17 VIII-1-83-84

BC98-488 BC83-025 BC82-314 BC81-610 BC90-678 BC87-005 BC81-576 BC82-738 BC82-521 BC84-051 BC84-266 BC86-252 BC87-043 BC81-184* BC92-249 BC86-235 BC87-164 BC87-070 BC85-179 BC85-608 BC87-424 BC87-430 BC88-182 BC88-423 BC93-111 07-2024 BC90-679 BC87-041 BC83-208 BC87-007 BC88-437 BC90-256 BC93-399 BC82-679 BC82-679* BC85-496 BC94-411 BC82-545

756 172 24 95 557 278 95 54 28 146 178 254 283 1 89 552 261 298 320 206 233 312 345 356 370 581 940 498 332 98 279 372 480 591 42 550 226 630 50


(ac) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

File No.

Markings (Cont’d) pressure part (Cont’d)

radiography Low Temperature Service

Interpretation


BC84-264 BC86-105 BC89-208 BC89-251 BC90-294

177 319 411 415 438

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Subject

Interpretation

File No.

Page No.

Materials (Cont’d) identification (Cont’d)

inspection

iron castings manufacturer marking

Monel Non-Code

nonmetallic nonmetallic view ports nut ordering P-No. 1 P-No. 8 plate pressure parts product specification recertification

repairs rod or bar (as pressure parts) SA-20 SA-36

SA-47 Gr. 35018 SA-53 SA-53, Type E, Grade B

SA-105

SA-106 SA-179 SA-182 SA-198, Gr. 87

Subject

Interpretation

File No.

Materials (Cont’d) SA-198, Gr. 87 (Cont’d)

VIII-1-89-243 VIII-1-92-141 VIII-1-95-75 VIII-1-83-161 VIII-1-89-116 VIII-1-89-173 VIII-1-89-181 VIII-1-89-182 VIII-1-92-189 VIII-1-01-152 VIII-1-83-342 VIII-1-83-352 VIII-1-92-07 VIII-1-95-90 VIII-1-89-02 VIII-1-89-197 VIII-1-92-89 VIII-1-92-172 VIII-1-98-44 VIII-1-89-50 VIII-1-83-60 VIII-1-83-348 VIII-1-86-188 VIII-1-83-361R VIII-1-83-256 VIII-1-83-310 VIII-1-86-76 VIII-1-92-74 VIII-1-83-155 VIII-1-83-227 VIII-1-83-155 VIII-1-04-92 VIII-1-01-157 VIII-1-89-194 VIII-1-89-75 VIII-1-92-18 VIII-1-95-109 VIII-1-83-351 VIII-1-95-65 VIII-1-92-95 VIII-1-98-116 VIII-1-83-45 VIII-1-89-66 VIII-1-95-03 VIII-1-83-190 VIII-1-86-75 VIII-1-83-330 VIII-1-86-44 VIII-1-86-209 VIII-1-83-25 VIII-1-83-189 VIII-1-83-205 VIII-1-89-47 VIII-1-89-178 VIII-1-89-244 VIII-1-83-95 VIII-1-82-253 VIII-1-10-01 VIII-1-83-26 VIII-1-83-37

BC90-651 BC93-036 BC94-308 BC83-268 BC89-204 BC90-010 BC90-226 BC90-236 BC93-034 BC03-659 BC84-667 BC85-016 BC91-301 BC93-109 BC88-122 BC90-255 BC92-216 BC92-460 BC98-242 BC88-358 BC82-659 BC82-385B BC83-085 BC87-425 BC77-701* BC84-030 BC84-266 BC86-253 BC91-412 BC83-197 BC82-563 BC83-197 BC06-357 02-2792 BC90-345 BC89-004 BC91-399 BC93-669 BC84-676 BC94-067B BC87-296 BC99-564 BC81-038 BC88-439 BC94-286 BC82-197 BC86-252 BC83-320 BC85-593 BC87-474 BC82-301 BC81-531 BC83-461 BC88-207 BC90-224 BC90-656 BC82-787 BC83-663 08-617 BC82-311 BC82-314

462 577 663 94 401 430 432 433 599 869 197 202 507 675 343 438 553 593 742 365 35 200


BC82-519 BC91-404 BC92-685 BC83-663 BC81-301 BC82-221 BC87-251 BC83-663 BC88-111 BC86-237 BC83-461 BC88-010 BC88-413 BC86-218 BC83-546 BC82-521

28 33 53 142 129 107 304 142 362 246 114 329 369 244 126 28

SA-737 Gr. C SA-789 UNS S31803 SA-790 UNS S31803 Section II SB designation SB-75 SB-111


BC84-154 BC83-582 BC81-301 BC99-477 BC85-606 BC88-010 BC97-317 BC81-660 BC83-235 BC88-471 BC91-220 08-599 BC82-545 BC86-381 BC86-381 BC80-251 BC81-610 BC83-538 BC81-443

158 128 129 767 233 329 729 8 132 379 510 945 50 267 267 170 95 176 105

SB-443 SB-637

VIII-1-83-34 VIII-1-89-148

BC82-264 BC89-265

23 416

stock structural steel

VIII-1-95-131 VIII-1-86-103

BC96-306 BC86-370

695 265

tensile strength

VIII-1-83-245 VIII-1-89-160

BC83-642 BC89-373

139 420

VIII-1-07-42 VIII-1-83-213

07-2038 BC83-075

939 124

VIII-1-92-49 VIII-1-07-16

BC90-004 BC06-1578

531 922

thickness

VIII-1-89-62 VIII-1-89-99

BC88-427 BC89-112

371 389

VIII-1-89-106

BC89-169

392

tubesheet

VIII-1-89-80

BC89-036

382

Type 304 Type 304L

VIII-1-83-117 VIII-1-83-117

BC82-305 BC82-305

67 67

undertolerance

VIII-1-86-67

BC86-240

247

verification

VIII-1-86-129

BC87-045

283

vessel

VIII-1-83-04 VIII-1-95-107

BC81-526 BC96-122

8 682

SA-214 SA-234 SA-263 SA-266 Class 2 SA-285 SA-312 SA-350 SA-353 SA-372 SA-372, Type 5, Class B SA-455 SA-479 Gr. XM-19 and XM-29 SA-515 Gr. 60 SA-515 Gr. 70 SA-516 SA-516 Gr. 70 SA-553 Type I

313 205 144 178 255 540 91 130 91 913 925 437 380 512 687 201 655 555 784 87 372 625 106 254 191 237 327 17 106 114 363 431 462 56 142 952 17 24

SA-575 SA-612 SA-649

test report

(ad)

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Page No.



Subject

Interpretation

Materials (Cont’d) welded pipe welded stub ends

Multiple Chamber Nameplates abbreviations additional markings adhesive attachment

attachment

bracket manufacturer’s serial number marking

painted background size of markings stamping temperature range units welded to vessel when applied Noncircular Vessels

Page No.

Subject

Interpretation

VIII-1-89-64 VIII-1-95-98

BC88-429 BC95-471

371 678

VIII-1-92-163

BC93-540

590


BC96-215 BC00-084 BC02-102a BC03-1035

688 802 847 868

VIII-1-95-34

BC91-573

643

VIII-1-98-94

BC99-574

774

VIII-1-89-22 VIII-1-01-145 VIII-1-86-30 VIII-1-98-101 VIII-1-01-112 VIII-1-92-13 VIII-1-95-81 VIII-1-95-108 VIII-1-89-18 VIII-1-89-18R VIII-1-89-86 VIII-1-89-86R VIII-1-89-101 VIII-1-89-101R VIII-1-89-151 VIII-1-89-228 VIII-1-92-08 VIII-1-92-09 VIII-1-92-09R VIII-1-92-09R-2 VIII-1-92-98 VIII-1-92-159 VIII-1-92-162 VIII-1-92-190 VIII-1-95-17 VIII-1-95-99 VIII-1-01-100 VIII-1-01-103 VIII-1-01-124 VIII-1-10-08 VIII-1-83-249 VIII-1-83-251 VIII-1-04-95 VIII-1-89-77 VIII-1-07-27 VIII-1-86-167 VIII-1-89-71

BC88-135 BC03-179 BC85-487 BC99-609 BC99-573 BC91-210 BC93-736 BC96-099 BC88-106 BC88-106* BC89-046 BC89-046* BC89-115 BC89-115* BC89-269 BC90-427 BC91-310 BC91-386 BC91-386* BC91-386** BC92-319 BC93-481 BC93-510 BC93-145 BC94-411 BC95-474 BC01-644 BC01-724 BC02-2314 09-719 BC83-650 BC83-661 BC04-1455 BC89-016 07-613 BC87-235 BC88-459

353 865 225 777 845 510 666 682 351 351 384 550 390 623 417 455 507 507 508 527 556 589 590 605 630 678 836 837 849 955 140 141 914 381 931 304 379


BC92-103 BC93-512 BC94-291 BC96-209 (BC96-228) BC01-074 BC01-225 BC01-297 BC02-2310

583 617 627 690


ASNT

bleed out size calibration of equipment certification contractual agreements fluoroscopy heavy walled pressure vessels indication

material repairs multiple duplicate vessels personnel

piping SNT-TC-1A

visual examination welds Nozzles angle of axis attachment of

corrosion allowance design interconnected vessels internal projection in weld seam lining load paths material necks

805 809 816 849

VIII-1-07-57 VIII-1-83-166 VIII-1-86-01 VIII-1-89-90 VIII-1-83-167 VIII-1-83-82R

Page No.

943 96 213 385 97 189


08-826 BC82-754B BC83-535A BC88-354 BC82-830 BC80-289*, BC85-158 BC03-1021 BC86-203 BC83-424 BC82-513 BC82-830 BC82-827 BC83-592 BC84-676 BC85-187 BC82-811 BC83-201 BC83-210 BC82-754B BC84-564 BC83-424 BC83-201 BC83-210 BC82-754B BC86-196 BC91-401 BC93-765

VIII-1-83-219 VIII-1-83-102 VIII-1-83-120 VIII-1-83-275 VIII-1-86-86 VIII-1-86-88 VIII-1-86-149 VIII-1-86-151 VIII-1-89-13 VIII-1-89-122 VIII-1-89-175 VIII-1-89-215 VIII-1-92-170 VIII-1-92-178 VIII-1-04-35 VIII-1-07-29 VIII-1-89-37 VIII-1-01-32 VIII-1-01-66 VIII-1-83-322 VIII-1-10-07 VIII-1-83-208 VIII-1-83-136 VIII-1-83-212 VIII-1-01-92 VIII-1-83-66 VIII-1-83-05 VIII-1-83-138 VIII-1-83-184 VIII-1-83-199 VIII-1-83-215 VIII-1-83-217

BC83-556 BC82-843 BC83-030 BC84-129 BC86-293 BC86-300 BC87-168 BC87-110 BC87-254 BC86-380 BC90-023 BC90-291 BC93-489 BC93-588 BC04-685 07-1291 BC88-299 BC01-079 BC01-335 BC84-411 09-1043 BC83-465 BC83-224 BC82-882 BC01-340 BC82-294 BC81-651 BC82-880 BC83-328 BC82-226 BC83-404 BC83-544

126 59 68 153 259 260 297 298 348 405 430 450 593 595 887 932 359 806 818 182 954 115 76 123 833 38 8 77 103 111 125 125

(ae) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

File No.

Nondestructive Examination

Maximum Allowable Working Pressure

Minimum Design Metal Temperature

File No.


878 324 113 27 97 172 176 201 204 51 92 93 96 184 113 92 93 96 324 540 610

` , , ` , ` , , ` , , ` ` ` ` ` ` ` ` , ` , ` ` ` ` , ` ` ` , ` , , ` , ` , ` ` , , ` -


Subject

Interpretation

File No.

Page No.

Nozzles (Cont’d) necks (Cont’d)

openings

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

pipes

postweld heat treatment recessed reinforcement

seamless

shear strength welds offset Openings access

adjacent attachment welds design flat head flued openings

Subject

Interpretation

Openings (Cont’d) head

VIII-1-83-302 VIII-1-83-313 VIII-1-86-147 VIII-1-95-01 VIII-1-95-133 VIII-1-98-08 VIII-1-98-18 VIII-1-01-61 VIII-1-04-57 VIII-1-01-156 VIII-1-83-266 VIII-1-89-196 VIII-1-89-196R VIII-1-04-12 VIII-1-83-293 VIII-1-83-76 VIII-1-83-219 VIII-1-83-07R VIII-1-98-55 VIII-1-01-01 VIII-1-92-80 VIII-1-86-26 VIII-1-89-87 VIII-1-83-261 VIII-1-83-285 VIII-1-83-332 VIII-1-83-341 VIII-1-86-50 VIII-1-86-65 VIII-1-86-144 VIII-1-86-151 VIII-1-86-168 VIII-1-89-49 VIII-1-89-313 VIII-1-98-313R VIII-1-92-05 VIII-1-92-69 VIII-1-92-69R VIII-1-92-119 VIII-1-95-123 VIII-1-98-118 VIII-1-01-119 VIII-1-01-159 VIII-1-01-160 VIII-1-07-70 VIII-1-83-239 VIII-1-83-240 VIII-1-83-272 VIII-1-89-36 VIII-1-83-22 VIII-1-98-85

BC83-332 BC84-361 BC87-159 BC94-217 BC96-353 BC97-262 BC97-517 BC01-300 BC04-1634 02-3218 BC84-089 BC90-234 BC90-234* BC03-1585 BC84-193 BC82-678 BC83-556 BC81-664* BC98-365 BC00-388 BC92-167 BC85-466 BC85-600 BC84-052 BC84-141 BC84-115 BC84-662 BC86-079 BC86-237 BC87-167 BC87-110 BC87-168 BC88-221 BC90-470 BC90-470* BC91-292 BC91-102 BC91-102* BC92-388 BC96-227 BC00-157 BC02-2318 02-4037 02-4124 08-1725 BC83-600 BC83-602 BC84-116 BC88-183 BC82-289 BC99-300

174 179 296 624 701 718 727 816 899 925 148 438 475 875 161 42 126 189 751 789 543 223 384 147 157 192 196 239 246 294 298 305 365 497 749 506 538 538 569 692 785 848 926 926 950 135 135 152 359 16 766



77 103 41 669 692 204 716 237


inspection

large maximum size multiple

nozzle

rectangular flat cover in rectangular vessels reinforcement

threaded

vessel

Out-of-Roundness

Overpressure Protection

Parts dimpled or embossed assemblies insulation pins made to superseded revisions manufacture miscellaneous

nonmetallic view ports

File No.

VIII-1-83-266 VIII-1-89-120 VIII-1-98-117 VIII-1-04-03 VIII-1-83-286 VIII-1-86-56 VIII-1-83-150 VIII-1-83-208 VIII-1-83-238 VIII-1-83-244 VIII-1-83-323 VIII-1-83-324 VIII-1-86-83 VIII-1-04-04 VIII-1-07-62 VIII-1-83-358 VIII-1-86-155 VIII-1-86-160 VIII-1-86-176 VIII-1-92-136 VIII-1-83-46 VIII-1-83-206 VIII-1-89-276

BC82-191 BC91-628 BC82-880 BC84-599 BC85-488 BC89-078 07-543 BC83-007 BC99-370 BC83-661 BC93-359 BC82-273 BC82-677 BC82-784 BC84-430 BC95-461, BC96-538 BC84-089 BC89-231 BC00-156 BC02-2796 BC84-153 BC86-198 BC83-120 BC83-465 BC83-599 BC83-638 BC84-429 BC84-430 BC85-465 BC03-991 08-1429 BC85-124 BC87-183 BC87-194 BC87-383 BC93-031 BC82-518 BC83-463 BC91-014

148 403 784 873 158 242 88 115 135 138 182 183 257 873 944 204 299 302 307 575 28 114 483

VIII-1-92-127 VIII-1-95-78 VIII-1-07-51

BC92-275 BC94-111 08-114

572 665 942


BC00-501 BC98-291 BC99-084 BC01-910 06-1323

792 793 845 889 937

VIII-1-86-20

BC85-327

220

VIII-1-83-97 VIII-1-83-318 VIII-1-83-345 VIII-1-89-145 VIII-1-89-320 VIII-1-92-120 VIII-1-89-256R

BC82-806 BC82-270B BC84-677 BC89-242 BC91-265 BC92-405 BC84-030*

56 180 198 414 499 570 377

(af) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.


12 531 77 194 225 386 945 109 765 35 583 23 41 55 183 716


Subject Parts (Cont’d) pressure

stamping standard studs threaded Peening

Piping ERW

examination fittings geometric scope joint factor mill test reports partial data reports spiral standard wall stress values thermal expansion thickness

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

welded Planes in shell plate thickness Pneumatic Test gas leaking test in lieu of hydrostatic test

pressurization

Interpretation

File No.

Page No.

VIII-1-83-300 VIII-1-83-330 VIII-1-86-114 VIII-1-86-200 VIII-1-95-150 VIII-1-83-346 VIII-1-89-154 VIII-1-98-68 VIII-1-83-97 VIII-1-83-109 VIII-1-83-186R

BC83-273 BC83-320 BC87-001 BC87-473 BC96-523 BC84-695 BC89-285 BC99-218 BC82-806 BC82-195 BC83-071A

173 191 277 322 707 199 418 755 56 63 104

VIII-1-83-255 VIII-1-89-307 VIII-1-92-161

BC83-683 BC91-116 BC93-513

144 494 590

VIII-1-83-77 VIII-1-83-180 VIII-1-83-357 VIII-1-89-104 VIII-1-92-25 VIII-1-92-25R VIII-1-82-202 VIII-1-83-174 VIII-1-83-329 VIII-1-83-152 VIII-1-89-98 VIII-1-89-95 VIII-1-83-308 VIII-1-83-199 VIII-1-83-152 VIII-1-86-172 VIII-1-86-11 VIII-1-92-85 VIII-1-04-69 VIII-1-83-152

BC82-679 BC83-311 BC85-096 BC89-126 BC91-474 BC91-474* BC83-424 BC83-266 BC82-755 BC83-167 BC89-111 BC89-082 BC84-156 BC83-226 BC83-167 BC85-288 BC85-287 BC92-240 BC03-1903 BC83-167

42 101 203 391 515 605 113 99 191 90 389 387 177 111 90 306 217 551 903 90

VIII-1-83-16 VIII-1-98-80

BC82-223 BC99-362

13 764


BC01-81 BC81-526 BC86-252 BC92-220 BC96-472 BC93-765 BC01-226

803 8 254 551 706 610 814

Subject

Postweld Heat Treatment (Cont’d) exemptions (Cont’d) VIII-1-92-183 VIII-1-92-183R holding temperature VIII-1-83-103 VIII-1-83-165 VIII-1-83-168 VIII-1-83-307 VIII-1-89-232 VIII-1-89-232R VIII-1-01-143 hot-formed head VIII-1-86-222 lined vessels VIII-1-83-207 VIII-1-98-108 material VIII-1-95-37 P-No. 1 material VIII-1-83-155 VIII-1-83-165 VIII-1-86-06 VIII-1-83-168 VIII-1-83-175 VIII-1-86-41 VIII-1-86-125R P-No. 3 material VIII-1-83-168 VIII-1-89-289 VIII-1-04-73 P-No. 4 material VIII-1-83-168 VIII-1-92-104 P-No. 5 material VIII-1-86-204 VIII-1-92-153 P-No. 8 material VIII-1-83-155 P-No. 10C material VIII-1-83-271 P-No. 1 to P-No. 8 materials VIII-1-86-17 preheating VIII-1-83-49 VIII-1-92-176 pressure to nonpressure parts VIII-1-83-237 procedures VIII-1-89-288 VIII-1-07-08

shell-to-nozzle attachments shell-to-tubesheet strength welds test specimens

thickness

time at temperature Postweld Heat Treatment attachments

circumferential band exemptions

VIII-1-83-13 VIII-1-89-212 VIII-1-89-212R VIII-1-98-110 VIII-1-83-30 VIII-1-83-315 VIII-1-83-335 VIII-1-89-284 VIII-1-92-182

BC81-180 BC90-493 BC90-493* BC00-082 BC82-166 BC84-385 BC84-384 BC90-863 BC93-647

Interpretation

12 449 449 781 21 179 193 486 597

tube-to-tubesheet joints

Type 316 vessels

VIII-1-07-09 VIII-1-83-175 VIII-1-89-186 VIII-1-83-119 VIII-1-83-32 VIII-1-83-227 VIII-1-89-300 VIII-1-86-55 VIII-1-86-207 VIII-1-89-30 VIII-1-89-63 VIII-1-89-293 VIII-1-95-134 VIII-1-83-114 VIII-1-83-165 VIII-1-89-229 VIII-1-83-20 VIII-1-86-80 VIII-1-95-33 VIII-1-98-99 VIII-1-83-18 VIII-1-83-74 VIII-1-83-100 VIII-1-95-137

(ag) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS


File No.

BC93-648 BC93-648* BC82-873 BC82-736 BC83-084 BC83-636 BC90-481 BC90-481* BC02-2819 BC88-048 BC83-464 BC00-080 BC93-735 BC83-197 BC82-736 BC85-245 BC83-084 BC83-283 BC85-468 BC87-019* BC83-084 BC90-693 BC05-032 BC83-084 BC92-290 BC85-509 BC93-358 BC83-197 BC84-113 BC85-323 BC82-546 BC93-641 BC83-598 BC90-437 BC06-1123, BC06-1124 BC06-1362 BC83-283 BC90-305 BC82-411 BC82-240 BC82-563 BC91-194 BC86-114 BC87-290 BC88-192 BC88-428 BC91-049 BC96-255 BC81-130 BC82-736 BC90-438 BC82-259 BC86-268 BC88-084 BC99-597 BC82-242 BC82-664 BC82-825 BC96-334

Page No.

597 597 59 96 97 176 457 457 865 333 114 780 644 91 96 215 97 100 235 293 97 488 904 97 558 324 582 91 151 219 29 595 134 487 919 919 100 434 68 22 130 491 241 326 357 371 489 701 65 96 456 15 256 642 776 14 41 58 703


Subject

Interpretation

Postweld Heat Treatment (Cont’d) weld overlays VIII-1-83-189 VIII-1-83-192 weld joints VIII-1-01-130 VIII-1-04-17 weld seams VIII-1-01-52 VIII-1-01-87 Proof Test

Pressure maximum allowable

parts

pressure gages rapid pressure fluctuations rating static head Pressure Relief Devices attachment

automatic controls back pressure buckling pin capac ity certification coating determination of capacity jacketed vessel lifting devices liquid relief valves materials

overpressure protection pilot operated piping positive control

presetting valve springs rupture disk

File No.

Page No.

BC81-531 BC82-655 BC02-2793 BC03-1320 BC01-216 BC01-588

106 108 855 877 813 831


BC87-382 BC92-056 BC93-052 BC93-734 08-1351

495 563 577 607 944



62 192 312 458 485 691 743 801 805 137 385 299 145 277

VIII-1-86-205 VIII-1-89-312 VIII-1-89-312R VIII-1-98-06 VIII-1-83-28 VIII-1-92-133 VIII-1-86-52 VIII-1-92-200 VIII-1-92-150 VIII-1-01-102 VIII-1-98-59 VIII-1-83-33 VIII-1-86-57 VIII-1-92-152 VIII-1-92-177 VIII-1-01-128 VIII-1-89-118 VIII-1-98-90 VIII-1-92-223 VIII-1-01-96 VIII-1-86-100 VIII-1-83-39 VIII-1-89-117 VIII-1-98-64 VIII-1-83-129 VIII-1-83-51 VIII-1-83-69 VIII-1-86-157 VIII-1-98-06 VIII-1-98-43 VIII-1-98-71

BC86-370 BC90-343 BC90-343* BC96-259 BC80-607 BC92-093 BC85-486 BC93-501A BC93-112 BC01-702 BC97-398 BC82-260 BC86-199 BC93-138 BC93-583a BC02-3595 BC89-207 BC99-447 BC94-230 BC01-701 BC86-317 BC81-268 BC89-205 BC97-280 BC81-583 BC82-405 BC82-511 BC87-190 BC96-259 BC98-178 BC98-522

325 496 527 717 19 574 240 609 581 837 752 22 242 582 595 855 402 768 618 835 265 20 402 754 72 30 39 300 717 742 756

Subject

Interpretation

Pressure Relief Devices (Cont’d) safety valve VIII-1-83-27 VIII-1-83-197 VIII-1-83-278 VIII-1-83-280 VIII-1-86-126 VIII-1-04-40 safety valve/rupture disk VIII-1-83-194 combination size VIII-1-86-33 VIII-1-89-304 stamping VIII-1-89-303 VIII-1-92-212 stop valve VIII-1-83-338 VIII-1-92-67 VIII-1-92-132 VIII-1-04-97 supplemental devices VIII-1-98-73 VIII-1-01-94 test VIII-1-01-95 valve certification VIII-1-83-106 VIII-1-83-319 valve chatter VIII-1-83-106 VIII-1-04-89 valve flutter VIII-1-83-106 VIII-1-04-89 valve machining VIII-1-04-26 valve recertification VIII-1-83-106 valve set pressure VIII-1-83-350 VIII-1-89-70 VIII-1-89-315 valve welding VIII-1-83-186R Proof Test Quality Control ac ceptance criteria Data Report Forms inspectors’ duties manual material certification multilocation organization multiple duplicate vessels

nondestructive examination record retention required examination UM vessels verification of material welding

Radiography accessibility

before forming bleed-out size

File No.

BC80-198 BC83-039 BC82-860 BC83-591 BC86-215 BC04-583 BC82-740

18 110 154 155 282 890 109

BC85-502 BC91-012 BC90-864A BC94-190 BC84-615 BC92-055 BC90-728 BC05-1136 BC99-293 BC01-649 BC01-692 BC79-720 BC83-223C BC79-720 BC04-1311 BC79-720 BC04-1311 BC03-1329 BC79-720 BC84-602 BC88-386 BC90-631 BC83-071A*

226 493 492 614 195 537 574 914 757 834 834 61 181 61 912 61 912 884 61 201 378 498 104

VIII-1-01-65

BC01-333

818


BC92-304 BC83-032 BC84-335 BC94-059 BC92-332 BC98-307 BC82-684 BC86-522 BC80-289 BC82-754B BC87-299 BC87-079 BC87-197 BC87-045 BC82-684 BC90-725

559 64 200 610 652 754 43 277 49 96 305 284 302 283 43 465


BC81-664 BC82-513 BC82-518 BC82-624 BC83-557 BC83-212 BC82-830 07-134

9 27 28 29 127 98 97 943

(ah)

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Page No.



Subject Radiography (Cont’d) corner joint dished heads / shells ERW pipe filmless flanges

heads head-to-shell high alloy steels incomplete fusion indications

and inspector intersections marking material mottling multiple duplicate vessels nozzles pad type connection partial personnel

pipe postweld heat treatment prior to final machining records repair

requirements

retention review by AI rounded indication

spot

Interpretation

VIII-1-83-272 VIII-1-83-122 VIII-1-83-77 VIII-1-83-241 VIII-1-83-02 VIII-1-83-122 VIII-1-86-140 VIII-1-83-177 VIII-1-83-246 VIII-1-83-196 VIII-1-86-16 VIII-1-83-133R VIII-1-83-53 VIII-1-83-167 VIII-1-83-221 VIII-1-83-298 VIII-1-83-306 VIII-1-86-42 VIII-1-89-54 VIII-1-86-73 VIII-1-07-10 VIII-1-07-40 VIII-1-89-299 VIII-1-83-53 VIII-1-83-360 VIII-1-89-101 VIII-1-07-14 VIII-1-83-262 VIII-1-83-231 VIII-1-83-156 VIII-1-83-166 VIII-1-98-87 VIII-1-83-201 VIII-1-98-09 VIII-1-98-09R VIII-1-83-62 VIII-1-83-248 VIII-1-89-251 VIII-1-92-34 VIII-1-98-37 VIII-1-83-64 VIII-1-86-202 VIII-1-89-221 VIII-1-89-222 VIII-1-95-137 VIII-1-89-167 VIII-1-86-19 VIII-1-89-54 VIII-1-83-133R VIII-1-92-169 VIII-1-95-136 VIII-1-98-14 VIII-1-04-18 VIII-1-83-22 VIII-1-83-63 VIII-1-83-86 VIII-1-83-101 VIII-1-83-141 VIII-1-83-191 VIII-1-83-305 VIII-1-86-159

File No.

BC84-116 BC82-549 BC82-679 BC83-603A BC81-213 BC82-549 BC87-171 BC83-286 BC83-643 BC83-019 BC85-321 BC82-718* BC81-056 BC82-830 BC83-578 BC82-827 BC83-592 BC85-591 BC88-390 BC85-189 BC06-1117 07-1364 BC91-050 BC81-056 BC85-187 BC89-115 BC06-783 BC84-053 BC83-235 BC83-201 BC82-754B BC99-457 BC83-420 BC97-263 BC03-268* BC81-685B BC83-649 BC90-743 BC91-007 BC98-246 BC82-125 BC87-408 BC90-510 BC90-522 BC96-334 BC89-415 BC85-326 BC88-390 BC82-718* BC93-485 BC96-277 BC96-477 BC03-1647 BC82-289 BC82-027 BC82-813 BC82-840 BC82-833 BC82-221 BC83-568 BC87-192

--`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Page No.

Subject

Interpretation

File No.

Page No.

Radiography (Cont’d) spot (Cont’d)

152 69 42 136 7 69 293 100 139 110 219 87 31 97 127 172 176 236 367 253 919 939 491 31 204 390 921 147 132 92 96 767 112 719 861 36 140 465 519 740 37 323 452 453 703 428 220 367 87 592 702 726 877 16 36 51 58 78 107 175 301

valves welds

VIII-1-83-186R VIII-1-89-191 VIII-1-89-292 VIII-1-95-63 VIII-1-98-46

BC91-518 BC92-171 BC95-218 BC95-400 BC95-463 BC97-519 BC98-290 BC00-081 08-104 BC83-429 BC85-592 BC81-019*, BC83-018 BC83-071A* BC90-350 BC91-046 BC95-167 BC98-293

Reference Standards

VIII-1-01-108 VIII-1-10-04

BC01-795 09-607

839 953

VIII-1-83-98 VIII-1-83-179 VIII-1-86-229 VIII-1-83-131 VIII-1-83-139 VIII-1-83-321 VIII-1-86-158 VIII-1-83-181 VIII-1-92-151 VIII-1-92-151R VIII-1-01-105 VIII-1-07-21 VIII-1-92-116 VIII-1-92-17 VIII-1-92-42 VIII-1-04-83 VIII-1-83-240 VIII-1-83-261 VIII-1-83-277 VIII-1-83-285 VIII-1-83-289 VIII-1-83-332 VIII-1-92-119 VIII-1-83-94 VIII-1-83-150 VIII-1-83-238 VIII-1-83-324 VIII-1-89-72 VIII-1-89-83 VIII-1-89-149 VIII-1-89-171 VIII-1-89-213 VIII-1-92-25 VIII-1-95-121 VIII-1-95-152 VIII-1-01-08

BC82-807 BC83-306 BC88-085 BC82-209 BC83-132 BC84-381 BC87-191 BC83-215 BC93-114 BC93-114* BC01-336 07-075 BC90-657 BC91-268 BC91-089 BC04-841 BC83-602 BC84-052 BC84-142 BC84-141 BC84-158 BC84-115 BC92-388 BC82-784 BC83-120 BC83-599 BC84-430 BC88-467 BC89-060 BC89-304 BC90-006 BC90-495 BC91-474 BC96-217 BC96-527 BC00-564

57 101 336 73 77 182 301 102 582 675 838 930 563 512 529 908 135 147 154 157 159 192 569 55 88 135 183 379 383 416 429 450 515 691 708 792

tubesheet tungsten inclusions and ultrasonic examination

Reinforcement area

cone

heads

jackets limits

nozzle

openings

VIII-1-92-32 VIII-1-92-82 VIII-1-95-71 VIII-1-95-86 VIII-1-95-87 VIII-1-98-22 VIII-1-98-53 VIII-1-98-109 VIII-1-07-56 VIII-1-83-203 VIII-1-86-43 VIII-1-81-16R

(ai) Licensee=Parsons Constructor & Fabricators Inc/5962381001, User=Parsons, Joe Not for Resale, 06/25/2012 12:26:03 MDT

518 544 662 668 669 728 750 781 943 113 236 167 104 436 489 654 743


Subject

Interpretation

File No.

Page No.

Reinforcement (Cont’d) openings (Cont’d)

rings

saddles shell

studded outlet Repairs before stamping bronze castings cast iron vessels clad material defect removal

dents iron castings locations material

porosity defects vessels welds

Rupture Disk Device

Safety Relief Devices

stop valves



832 833 850 25 179 183 219 147 154 159 915

VIII-1-83-83 VIII-1-83-121R-2 VIII-1-86-137 VIII-1-83-191 VIII-1-83-107 VIII-1-89-305 VIII-1-83-148 VIII-1-83-342 VIII-1-83-352 VIII-1-83-141 VIII-1-83-351 VIII-1-86-97 VIII-1-92-193 VIII-1-83-121R VIII-1-83-134 VIII-1-83-59 VIII-1-83-63 VIII-1-83-344

BC81-267 BC81-184* BC87-117 BC82-221 BC82-169 BC91-103 BC82-403 BC84-667 BC85-016 BC82-833 BC84-676 BC86-273 BC94-012 BC81-184* BC83-151 BC81-656 BC82-027 BC84-675

50 189 287 107 62 493 88 197 202 78 201 263 606 168 75 34 36 198

VIII-1-01-112 VIII-1-04-82

BC99-573 BC05-1270

845 907

VIII-1-89-254 VIII-1-89-262 VIII-1-92-132 VIII-1-92-132R VIII-1-92-43 VIII-1-92-48 VIII-1-92-94 VIII-1-92-94R VIII-1-92-99 VIII-1-92-111 VIII-1-92-188 VIII-1-95-25 VIII-1-95-36 VIII-1-95-79 VIII-1-95-95 VIII-1-95-97 VIII-1-95-143 VIII-1-98-17 VIII-1-98-42 VIII-1-01-03 VIII-1-01-11 VIII-1-01-13 VIII-1-01-16 VIII-1-04-13 VIII-1-04-70

BC90-542 BC89-109 BC90-728 BC90-728* BC91-560 BC92-005 BC92-116 BC92-116* BC92-321 BC92-351 BC92-207 BC94-058 BC93-637 BC94-620 BC94-267 BC91-445 BC95-489 BC97-443 BC97-266 BC00-391 BC00-047 BC00-679 BC00-676 BC03-1789 BC04-1260

466 476 574 624 529 531 555 675 557 561 599 632 644 665 677 678 705 727 741 790 793 794 799 876 903

Subject Scope air distribution manifolds applicability boundary

certificate of authorization directly fired vessels exemptions

external piping

design calculations filter presses filter tanks heat exchangers

hot water heating boilers hot water supply tanks

hydraulic turbine immersion heater indirect-fired storage water heater jacket jacketed kettles liquid capacity multi-chambered vessels operation pressure

Interpretation

File No.

VIII-1-86-85 VIII-1-07-43 VIII-1-89-29 VIII-1-89-261 VIII-1-95-88 VIII-1-98-54 VIII-1-01-28 VIII-1-01-99 VIII-1-89-286 VIII-1-86-35 VIII-1-95-84 VIII-1-89-168 VIII-1-89-176 VIII-1-89-203 VIII-1-89-231 VIII-1-92-215 VIII-1-95-44 VIII-1-95-48 VIII-1-95-52 VIII-1-95-74 VIII-1-95-130 VIII-1-98-15 VIII-1-98-19 VIII-1-98-89 VIII-1-98-112 VIII-1-01-04 VIII-1-01-09 VIII-1-01-15 VIII-1-01-97 VIII-1-01-98 VIII-1-04-33 VIII-1-04-47 VIII-1-04-90 VIII-1-07-19 VIII-1-83-282 VIII-1-83-329 VIII-1-86-193 VIII-1-98-81 VIII-1-92-164 VIII-1-89-03 VIII-1-89-59 VIII-1-95-77 VIII-1-04-54 VIII-1-86-124 VIII-1-86-98 VIII-1-86-132 VIII-1-86-136 VIII-1-04-20 VIII-1-89-46 VIII-1-95-128 VIII-1-86-164

BC86-292 07-1263 BC88-189 BC90-652 BC95-466 BC98-336 BC00-705 BC01-326 BC89-303 BC85-522 BC95-390 BC89-437 BC90-020 BC90-257 BC90-479 BC94-050 BC94-669 BC94-670 BC95-047 BC94-118 BC96-380 BC98-088 BC97-444 BC99-479 BC00-096 BC00-500 BC00-596 BC00-664 BC00-465 BC01-227 BC03-1277 BC04-1115 BC06-095 06-1272 BC84-137 BC82-755 BC85-222 BC99-373 BC93-503 BC88-123 BC88-422 BC94-586 BC05-075 BC87-071 BC86-301 BC87-107 BC87-116 BC03-915 BC88-174 BC95-396 BC87-291

258 940 357 476 669 750 804 836 486 227 668 428 431 441 456 615 647 649 650 663 694 726 727 767 782 790 793 799 835 836 887 896 912 929 156 191 319 765 591 343 369 664 898 281 264 285 287 878 363 694 303

VIII-1-04-37 VIII-1-89-31 VIII-1-86-13 VIII-1-04-10 VIII-1-04-60 VIII-1-83-259 VIII-1-86-142 VIII-1-86-143 VIII-1-86-145


888 357 218 875 900 146 294 294 295

(aj) --`,,``,`,`,,`,```,````,`,``````-`-`,,`,,`,`,,`---


Page No.



Subject

Interpretation

File No.

Page No.

Scope (Cont’d) pressure (Cont’d)

proprietary connections quick actuating closures screw feeders or conveyors size stamping steam chambers

steam coil generators steam generator steam drum stress threaded plugs UM stamped vessels volume water containing capacity weld joints Service Restrictions design temperatures

direct firing examination lethal service

low temperature service

noncorrosive Shells alignment ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

conical courses drilled holes dummy layer ERW pipe flat spots radius roundness templates

Subject

Interpretation

Shells (Cont’d) seamless

VIII-1-86-154 VIII-1-89-01 VIII-1-86-224 VIII-1-98-57 VIII-1-83-258 VIII-1-86-94 VIII-1-83-259 VIII-1-86-211 VIII-1-98-24 VIII-1-01-74 VIII-1-86-163 VIII-1-89-147 VIII-1-92-139 VIII-1-86-87 VIII-1-01-33 VIII-1-04-31 VIII-1-86-60 VIII-1-95-02 VIII-1-92-208 VIII-1-86-89 VIII-1-86-165 VIII-1-83-259 VIII-1-89-235 VIII-1-83-247 VIII-1-04-79

BC87-175 BC88-119 BC88-051 BC98-368 BC84-033 BC86-257 BC84-050 BC88-007 BC98-115 BC01-321 BC87-202 BC89-255 BC93-032 BC86-295 BC01-091 BC03-775 BC86-211 BC94-281 BC94-114 BC86-313 BC87-250 BC84-050 BC90-534 BC83-648 BC05-623

299 343 334 751 145 262 146 328 729 825 303 415 576 259 806 886 244 625 612 264 304 146 458 140 906


BC83-652A BC84-264 01-378 BC92-376 BC82-164 BC82-678 BC85-194 BC99-522 BC82-546 BC82-397 BC83-073 BC83-083 BC81-038 BC83-663 BC84-106 BC83-318 BC88-052 BC96-341A BC84-599

141 177 941 562 10 42 207 775 29 67 71 71 87 142 151 155 419 703 194


BC82-285 BC86-234 BC88-008 BC83-597 08-1546 BC83-262 BC86-322 BC82-652 BC85-096 BC97-283 BC87-108 BC82-787 BC82-122

78 245 329 134 954 93 266 89 203 717 321 56 171

VIII-1-83-11 VIII-1-83-42 VIII-1-83-145 VIII-1-83-203 VIII-1-83-355 VIII-1-92-31 VIII-1-83-308 VIII-1-83-297 VIII-1-86-107 VIII-1-89-66 VIII-1-83-151 VIII-1-83-211 VIII-1-83-228 VIII-1-83-362 VIII-1-86-36 VIII-1-86-177 VIII-1-86-179 VIII-1-86-214 VIII-1-86-225 VIII-1-89-121 VIII-1-89-156 VIII-1-04-08 VIII-1-04-76 VIII-1-07-13

Page No.

BC82-165 BC82-416 BC83-200 BC83-429 BC85-066 BC91-517 BC84-156 BC82-122 BC86-447 BC88-439 BC82-652 BC82-417 BC82-824 BC83-559 BC85-599 BC87-390 BC87-073 BC88-011 BC88-053 BC88-121 BC88-052 BC03-1347 BC05-565 BC06-1199

11 26 80 113 203 518 177 171 268 372 89 123 130 205 233 308 309 329 334 404 419 874 905 920

VIII-1-83-328 VIII-1-83-269 VIII-1-89-246 VIII-1-92-10 VIII-1-92-53 VIII-1-95-101 external pressure construction VIII-1-83-140 heat exchangers VIII-1-81-89R hyperbaric vessels VIII-1-83-361R jacketed vessels VIII-1-86-127 multichamber VIII-1-92-75 parts VIII-1-83-65 VIII-1-83-346 VIII-1-86-133 pressure relief devices VIII-1-83-69 radiographed vessels VIII-1-86-146 VIII-1-86-148 VIII-1-89-318 repairs VIII-1-83-83 reshaping for Division 2 VIII-1-86-162 statement of policy VIII-1-92-76 UM VIII-1-83-111 VIII-1-86-119 VIII-1-95-144

BC82-284 BC84-105 BC90-650 BC91-387 BC91-384 BC95-498B BC82-285 BC81-258* BC77-701* BC86-285 BC91-467 BC82-293 BC84-695 BC87-109 BC82-511 BC87-158 BC87-162 BC90-685 BC81-267 BC87-199 BC92-152 BC83-022 BC87-009 BC96-240

190 150 463 508 533 679 78 6 205 282 541 37 199 285 39 295 296 499 50 303 541 63 279 705

Standard Pressure Parts

VIII-1-95-21 VIII-1-98-55

BC94-494 BC98-365

631 751

Staybolts

VIII-1-92-143

BC93-105

578

Stiffening

VIII-1-95-13 VIII-1-98-116

BC94-131 BC00-155 (BC00-267)

628 784

Stiffening Ring

VIII-1-92-68

BC92-101

538

section spiral stiffening rings

thickness

Stamping arrangement Code

(ak) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

File No.



Subject

Interpretation

File No.

Page No.

Stiffening Ring (Cont’d)


BC93-418 BC92-219 BC95-401 BC96-475 BC99-611 BC98-175 BC02-2744

Subject Test Plates heat treatment

580 608 687 717 778 779 850

66


BC96-210 BC96-245 BC98-526 08-909 BC91-303 BC95-164

690 705 752 941 539 677

Threaded Connections

VIII-1-95-23

BC94-416

632

Tolerance

VIII-1-01-85

BC01-325

830



305 716 764 90 97 90 921 90

VIII-1-83-42 VIII-1-95-18 VIII-1-98-34 VIII-1-83-195 VIII-1-83-157 VIII-1-89-20 VIII-1-92-88 VIII-1-98-69 VIII-1-04-19 VIII-1-04-23 VIII-1-04-28 VIII-1-04-41 VIII-1-04-44 VIII-1-04-52 VIII-1-04-53 VIII-1-04-58 VIII-1-04-61 VIII-1-04-71 VIII-1-83-176 VIII-1-07-01 VIII-1-04-75 VIII-1-83-56 VIII-1-83-161 VIII-1-83-354 VIII-1-83-189 VIII-1-04-56 VIII-1-83-203 VIII-1-95-146 VIII-1-04-81 VIII-1-83-10 VIII-1-89-32 VIII-1-89-92 VIII-1-04-55 VIII-1-07-71

BC82-416 BC92-326 BC98-225 BC83-007 BC83-207 BC88-125 BC92-170 BC99-271 BC03-1648 BC03-1825 BC04-043 BC04-864 BC04-472 BC05-005 BC05-006 BC05-007 BC05-411 BC05-271 BC83-285 BC06-558 BC05-563 BC81-403 BC83-268 BC85-028 BC81-531 BC05-093 BC83-429 BC96-376 BC05-1101 BC82-164 BC88-202 BC89-076 BC05-092 08-1286

26 630 738 109 92 352 553 755 878 879 885 890 895 897 898 900 900 904 100 916 905 33 94 202 106 899 113 706 907 10 358 386 898 951

VIII-1-83-50

BC82-624

29

Thickness minimum

shear tubesheets welded pipe or tubing yield strength


146 7 136 159 645 113 90 158

Taper

VIII-1-92-45

BC91-567

530

Tapped Holes

VIII-1-89-161 VIII-1-92-70 VIII-1-95-125

BC89-374 BC91-308 BC96-249

420 539 692

VIII-1-89-208 VIII-1-89-255

BC90-467 BC90-655

448 467


BC89-114 BC88-430 BC89-160 BC89-209 BC89-217 BC96-233 02-4113

389 407 409 411 411 708 939

radiography

VIII-1-89-207 VIII-1-89-207R

BC90-405 BC90-405*

447 447

Ultrasonic Examination heat exchangers

metric values ratio of ` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

reduction factor

Telltale Holes

Temperature minimum design

Test Gages

121 99 101 126 135 158 189 226 420 459 530 838 72 123 33 151 804 877 346 5

Tubes bending finned

joint factor straight stress values u-tubes welded Tubesheets connections

corner joints design

extension forged joints layered construction PWHT of weld overlay

tube-to-tubesheet joint

(al) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

Page No.

BC81-559

BC82-756* BC83-266 BC83-311 BC83-546 BC83-600 BC84-154 BC81-664* BC85-496 BC89-373 BC90-627 BC91-564 BC01-521 BC83-072 BC82-417 BC81-404 BC84-106 BC01-094 BC03-1319 BC84-661 BC78-847*, BC81-433* BC84-051 BC81-213 BC83-604 BC84-158 BC94-567 BC83-429 BC83-167 BC84-154

bolting different increased low temperature

VIII-1-83-92R VIII-1-83-174 VIII-1-83-180 VIII-1-83-218 VIII-1-83-239 VIII-1-83-287 VIII-1-83-07R VIII-1-86-32 VIII-1-89-160 VIII-1-89-237 VIII-1-92-44 VIII-1-01-106 VIII-1-83-128 VIII-1-83-211 VIII-1-83-57 VIII-1-83-270 VIII-1-01-29 VIII-1-04-16 VIII-1-89-09 VIII-79-13R

File No.

VIII-1-83-116

nominal Stress Values allowable compressive allowables

Interpretation



Subject

Interpretation

Ultrasonic Examination (Cont’d) heavy wall vessels VIII-1-83-45 imperfections VIII-1-92-36 radiography VIII-1-81-16R

reference level

repairs welded joints


BC82-513 BC91-115 BC81-019*, BC83-018 08-1260 08-1259 09-577 BC90-005 BC90-303 BC97-440 02-3521 BC96-337, BC96-368

Page No.

BC89-411 BC98-180 BC99-222

427 738 766

User Requirements

VIII-1-95-74

BC94-118

663

BC89-117 BC82-298 BC83-662 BC85-208 BC86-361 BC87-018 BC80-198 BC84-125 BC84-598 BC82-808 BC88-411 BC90-686 BC99-102 BC81-260 BC83-246 BC83-110, BC83-298 BC83-356 BC84-157 BC86-285 BC81-100 BC82-652 BC84-334 BC85-028 BC85-330 BC86-201 BC82-684 BC85-187 BC85-522 BC88-027 BC89-081 BC82-206 BC83-110, BC83-298 BC84-157 BC84-643 BC85-285 BC84-591 BC87-381 BC04-1500 BC87-486 BC88-139

390 74 142 247 321 279 18 192 280 57 360 465 862 7 94 131

VIII-1-89-102 VIII-1-83-132 VIII-1-83-252 VIII-1-86-68 VIII-1-86-195 circuit reclosers VIII-1-86-120 connected VIII-1-83-27 embossed assembly VIII-1-83-333 establishing design conditions VIII-1-86-121 exclusion from scope VIII-1-83-99 forged VIII-1-89-39 VIII-1-89-252 VIII-1-01-137 independent VIII-1-83-03 jacketed VIII-1-83-162 VIII-1-83-230

layered construction

multilayer vessels multiple duplicate

noncircular

unfired steam boilers

VIII-1-83-233 VIII-1-83-288 VIII-1-86-127 VIII-1-83-27R VIII-1-83-151 VIII-1-83-334 VIII-1-83-354 VIII-1-86-21 VIII-1-86-59 VIII-1-83-79 VIII-1-83-360 VIII-1-86-113 VIII-1-86-215 VIII-1-89-94 VIII-1-83-15 VIII-1-83-230 VIII-1-83-288 VIII-1-83-363 VIII-1-86-09 VIII-1-86-23 VIII-1-86-182 VIII-1-04-51 VIII-1-86-201 VIII-1-89-45

Visual Examination piping welded joints

949 952 953 429 435 726 925 710

VIII-1-89-164 VIII-1-98-33 VIII-1-98-84

Subject Vessel Types (Cont’d) water containing

27 520 167

Undertolerance

Vessel Types buried chambered

` , , ` ` , ` , ` , , ` , ` ` ` , ` ` ` ` , ` , ` ` ` ` ` ` ` ` , , ` , , ` , ` , , ` -

File No.

Welding acceptance criteria

after testing alignment alignment tolerances

arc attachments backing strips brazing

build-up butt

buttered joints calibration of equipment categories connections

132 159 282 49 89 193 202 220 243 43 204 277 330 387 13 131

corner joints corrosion resistant overlay different welders double weld butt EGW electrodes FCAW fillet welds

159 206 216 221 310 897 322 362

fittings flanges forgings formed heads

Interpretation

Page No.

VIII-1-89-34 VIII-1-07-11

BC88-246 BC06-1118

358 920


BC83-311 BC88-080 BC01-295 BC02-2305

101 362 815 863

VIII-1-83-87 VIII-1-10-05 VIII-1-83-137 VIII-1-07-58 VIII-1-86-90 VIII-1-86-104 VIII-1-98-106 VIII-1-04-07 VIII-1-83-145 VIII-1-98-62 VIII-1-86-116 VIII-1-83-200 VIII-1-83-299 VIII-1-83-312R VIII-1-89-179 VIII-1-83-80 VIII-1-83-265 VIII-1-89-109 VIII-1-92-112 VIII-1-95-105 VIII-1-83-155 VIII-1-98-78 VIII-1-83-146 VIII-1-83-22 VIII-1-83-34 VIII-1-92-205 VIII-1-92-205R VIII-1-95-151 VIII-1-01-41 VIII-1-07-53 VIII-1-83-107 VIII-1-83-86 VIII-1-83-268 VIII-1-86-58 VIII-1-86-141 VIII-1-89-129 VIII-1-86-210 VIII-1-86-81 VIII-1-07-22 VIII-1-83-40 VIII-1-83-160 VIII-1-83-173 VIII-1-83-198 VIII-1-83-277 VIII-1-04-43 VIII-1-04-94 VIII-1-07-26 VIII-1-10-03 VIII-1-89-61 VIII-1-83-303 VIII-1-89-135 VIII-1-83-65

BC82-828 09-808 BC82-782 08-838 BC85-255 BC86-372 BC99-595 BC03-933 BC83-200 BC98-510 BC87-005 BC83-408 BC83-025 BC84-340* BC90-262 BC82-719 BC84-087 BC89-159 BC92-352 BC96-104 BC83-197 BC99-359 BC80-038C BC82-289 BC83-264 BC93-775 BC93-775* BC96-526 BC01-223 08-1043 BC82-169 BC82-813 BC84-102 BC86-200 BC87-172 BC89-118 BC87-496 BC86-334 07-418 BC82-402 BC83-034 BC83-261 BC83-139 BC84-142 BC04-1043 BC00-559 07-1262 09-637 BC88-424 BC83-359 BC89-206 BC82-293

52 953 76 943 260 267 779 874 80 753 278 112 172 190 432 43 148 399 561 681 91 764 81 16 23 611 639 707 809 942 62 51 149 243 293 408 327 256 930 25 94 99 111 154 891 913 931 953 370 174 410 37

(am) Copyright ASME International (BPVC) Provided by IHS under license with ASME lue.class` No reproduction or networking permitted without license from I HS

File No.


Asme Sec Viii-1 Interp

Recommend Documents