DATE CLIENT PROJECT LOCATION
: : : :
SUBJECT: Owner-Architect Agreement Agreement Dear Mr. _______, I am pleased to submit herewith my proposal for the Architectural Architectural and Engineering Services for your Proposed Two-Storey Residence with approximate total floor area of _____ square meters meters to to be located in (site address). 1.0.
SCOPE OF WORK It is the Architect’s understanding that the CLIENT plans to develop and build a two-storey residence with the following space requirement: (List the spaces) (Architect) has organized the Architecture and Engineering Services to accomplish the scope of work into the following four (4) phases: Phase I Phase II Phase III Phase IV
1.1.
Schematic Design Phase Design Development Phase Construction Drawing Phase Construction Phase
Phase I – Schematic Design Phase
Upon receipt of an approved proposal with down payment and based on your requirement the architect shall: -
Undertake conferences to the client to ascertain ascertain the space requirements
-
Investigate and assess existing physical conditions of the project site
-
Prepare the initial line of of drawings representing design studies studies leading leading to a recommended solution for preliminary approval Schematic plans o Perspective studies o Conceptual and schematic studies o
-
Submit to the CLIENT a Statement Statement of the Probable Probable Project Construction Construction Cost (SPPCC) based (SPPCC) based on current cost parameters.
1.2.
Phase II – Design Development Phase Based on approved schematics and conceptual plans, the architect shall prepare:
1.3.
-
The Design Development drawings Plans o Perspectives o Elevations and Sections, o
-
Outline of basic specifications to fix and illustrate the size and character of the entire project;
-
Some engineering system concepts
-
An updated SPPCC for submission to the CLIENT
Phase III – Construction Drawing Phase Based on the approved Design Development Documents, the architect shall: -
Prepare the complete Contract Documents consisting of detailed designs and construction drawings, setting forth in detail the work required for the architectural works prepared by the Architect and the engineering works such as structural, sanitary & plumbing, electrical, and mechanical by the respective professionals involved;
-
Prepare Technical Specifications describing type and quality of materials, finish, manner of construction and the general conditions under which the project is to be constructed;
-
Submit to the CLIENT seven (7) sets of all architectural and engineering construction drawings (plans and details) and technical specifications for purposes of obtaining a building permit, including:
7 sets signed & sealed Architectural Plans & Details 7 sets signed & sealed Structural Plans, Computations & Details 7 sets signed & sealed Sanitary Plans & Details 7 sets signed & sealed Electrical Plans & Details 7 sets signed & sealed Mechanical Plans & Details, if any Budgetary Estimate Technical Specifications
At this time, we have figured an allowance of time to produce the necessary documents we feel that this is most fair to you and our firm. We shall endeavor to conduct our services within this range of time.
1.4.
Phase IV – Construction Phase In this phase, the architect shall perform the following: -
Make periodic visits to the project site to familiarize with the general progress and quality of work and to ascertain that the work is proceeding in accordance with the Contract Documents
-
Answer questions; check and approve material samples and shop drawings; make site visits; develop one punchlist walkthrough; one final walkthrough and reviewing submittals for the project.
The exhaustive and continuous on-site inspection (8 hours per day) to check the quality and quantity of the work is not part of this agreement. Should more extensive inspection or full-time (8-hour) construction supervision be required by the CLIENT, a separate full-time supervisor shall be hired and agreed upon by the CLIENT and the architect subject to the conditions provided in the Standards of Professional Practice (SPP) Document on Full -Time Supervision.
-
During project site visits and on the basis of his observations, the architect shall report to the CLIENT defects and deficiencies, if any, noted in the work of Contractors, and shall condemn work found failing to conform to the Contract Documents.
-
The architect shall be represented in the project’s meetings to discuss technical and project management concerns with the project owners, project management group, contractors, subcontractors, suppliers, and other parties involved. The architect’s various engineering consultants, if any shall be made available as necessary.
-
The architect examine and approve samples, schedules, shop drawings, and other requirements, subject to and in accordance with the descriptive information and provisions of the Contract Documents and concurrence by the Client. Such reviews shall not relieve, however, any contractor, subcontractor, supplier, or any other third party from responsibility for any deficiency and for the responsibility to coordinate with other trades’ work.
-
At the completion and turnover of the project, the architect shall conduct final inspection, prepare evaluation reports regarding the quality of work of the Contractors and issue certificates of substantial and final completion of the project.
When the architect is requested by the CLIENT to do the full time supervision, her
services and fees for the full time supervision shall be covered separately in conformance with the applicable and appropriate SPP Document; and Any Site Inspection or meeting beyond the number of site visits agreed in this Contract will be covered separately. 2.0.
RESPONSIBILITIES OF THE CLIENT The CLIENT shall:
3.0
-
Provide the architect full information as to his requirements of the PROJECT;
-
Designate, when necessary, representative/s authorized to act on his behalf.
-
Examine documents submitted by the architect and render decisions pertaining thereto promptly, to avoid unreasonable delay in the progress of the architect’s work;
-
Observe the procedure of issuing order to Contractors only through the architect;
-
Furnish or direct the architect to obtain, at the CLIENT’s expense, a certificate survey of the site, giving as required, grades and line of street, alleys, pavements, and adjoining property; right of way, restrictions, easements, encroachment, zoning, deed restrictions, boundaries and contours of the building site, locations, dimensions and complete data pertaining to existing building, other improvements and trees; full information as to available service and utility lines, both public and private; and test borings and pits necessary for determining subsoil conditions;
-
Pay for structural, chemical, mechanical, soil mechanics or other tests and reports, if required. Investigations regarding the site conditions of concealed elements (such as sewer, storm and water system, etc.) especially if it will require excavation or removals shall be charged to the client.
-
Provide the architect the necessary building clearances passes and similar papers of authority during the conduct of the Architectural and Engineering Services; and
-
Should the CLIENT observe or otherwise become aware of any defect in the PROJECT, he shall give prompt written notice thereof to the architect.
PROFESSIONAL FEE
The Professional Fee (PF) for the abovementioned Scope of Work of Architectural and Engineering Services will be _ % of Project Construction Cost.
4.0
Delay of Payment
Any payment due the architect beyond thirty (30) days from billing shall bear a two percent (2%) interest per month.
5.0
Changes and/or Revisions
Any change and/or revision requested by the CLIENT after approval of design development document shall be subject to compensation agreed by both parties but not less than the cost of drafting services and materials multiplied by a factor of 2.5. (NOTE: Revision work shall not constitute a reason for delay in accepting any particular work phase or setting the fees due for that phase.
6.0
Suspension
If the work of the architect is abandoned or suspended, in whole or in part, the architect is to be paid by the CLIENT for the services rendered corresponding to the fees due at the stage of the suspension or abandonment of the work.
7.0
Other Specialty Professional Services
Other services that may be needed in order to complete the project such as services for landscape, telecommunications, interior design, security, and public art consultation may be recommended by the Architect for the Client’s approval and account, but shall not be deductible from the Architect’s fee.
8.0
Government Laws
This agreement is based on the provision of the Architect’s National Code as approved by the Professional Regulatory Commission for compliance by all practicing Architects. Any clarification shall therefore be based on the Architect’s National Code. The Contract Documents, as instruments of services, shall remain the property of the Architect in accordance with Republic Act No. 9266 and Presidential Decree No. 49 where the design is executed or not. I hope the above would meet with your approval. Should you find the above proposal acceptable and in order, please sign your conformity in the space provided below. Thank you for your confidence and trust in me with regard to this proposed project.
Very truly yours,
(NAME) Architect
CONFORME:
CLIENT Date:
