( III ) INSULATING SYSTEM PAINTS (A) WATER PROOFING
ROOF
SILICONE STONE GUARD
ACRYLIC LATEX CAULK
ACRYLIC LATEX CAULK SUPER SEAL
SWIMMING POOL
(B)THERMAL INSULATING PAINTS I NTUMESCENT PAINT
FIRE RETARDANT
FIRE RETARDANT CLEAR
FIRE RETARDANT THINNER
CAVALIER THERMAL I NSULATING PAINT
(C) ANTI CARBONATION SYSTEM
PENETRATING SILOXANE PRIMER SEALER
AQUA SILOXANE PRIMER
ALIPHATIC ACRYLIC H.B.
PROTECT SEAL
(A) WATER PROOFING
ROOF
SILICONE STONE GUARD
ACRYLIC LATEX CAULK
ACRYLIC LATEX CAULK SUPER SEAL
SWIMMING POOL
ROOF DESCRIPTION
RECOMMENDED USE
Colors Finish Viscosity Specific Gravity Solid by Weight % Theoretical Spreading Rate Film Thickness Elongation - DIN 53455 Water Resistance Water Vapour Permebility U. V. Resistance Reinforcement Drying Time
An Acrylic copolymer base, one component seamless, highly flexible and durable waterproofing system which has good adhesion and excellent weather resistance. Roof protection, also suitable to protect expanded polyurethane foam from deterioration by U.V rays. TECHNICAL INFORMATION White, Brick. Smooth - Semi Gloss. 20 - 30 Poise. 1.34 ± 0.05 60 ± 2% 2 - 6 m²/Lit. (depending on thickness). (D.F.T.) 300 - 400 microns per coat. (W.F.T.) 650 - 860 microns per coat . 400% Approx. (max). Excellent Good Excellent Fibre Glass Touch dry : 4 - 6 hrs. Recoatable: 12 - 16 hrs. APPLICATION DATA
Application Methods
Brush, Roller or Towel.
Thinning / Cleaning of Tools
Water. RECOMMENDED SYSTEM
Primer Coat: 1 coat National Roof diluted (1 : 1) with water. Intermediate coat: 1 coat National Roof diluted (2 : 1) with water. Fix National Fiber Glass mesh while the intermediate is wet, allow to dry. Top Coat: 1 - 2 coats National Roof undiluted. OR Without fibre mesh directly apply over dry intermediate coat 2 coats undiluted National Roof . SURFACE PREPARATION
Must be clean, dry and free from dust, sand, other contaminations. Local touch -up of larger blow holes / cracks should be carried out prior to the application of the first full coat of National Roof.
1/2
ROOF MISCELLANEOUS DATA STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2
SILICONE STONE GUARD DESCRIPTION
RECOMMENDED USE
A Silicone base transparent water proofing system which has good penetration and drying even on damp substrate and develops water repellency very fast along with high alkaline resistance. All kind of concrete, mineral stucco, cement fiber-boards, sand-line brick work, mineral paints etc…
Flash Point
TECHNICAL INFORMATION Clear, Transparent. Matt. 2.5 - 3.5 Poise. 0.78 ± 0.02 5 ± 0.2% 3 - 5 m²/Lit. Touch dry : 1 hr. Recoatable: 2 - 4 hrs. 38ºC
Application Methods Thinning / Cleaning of Tools
APPLICATION DATA Brush, Roller or Spray. White Spirits.
Colors Finish Viscosity Specific Gravity Solid by Weight % Theoretical Spreading Rate Drying time
SURFACE PREPARATION
The stone walls should be throughly clean from dust and dirt. MECHANICIAL Reacts with atmospheric moisture or pore water in the substrate, thereby generating the active ingredient and liberating alcohol, the active ingredient greatly lowers absorbency of the substrate. Since neither pores nor capillaries are clogged, the substrate retains a very high degree of water vapor permeability.
STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
MISCELLANEOUS DATA The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 6 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
ACRYLIC LATEX CAULK DESCRIPTION
RECOMMENDED USE
An Acrylic copolymer base sealant filler which is flexible, has high adhesion and good weather resistance along with resistance to algae/moss/fungus. For filling up splits and parties in door and windows as well as sanitary pipes.
Colors Viscosity Specific Gravity Solid by Weight % Drying Time
TECHNICAL INFORMATION White, Bronze. Thick paste. 1.56 ± 0.05 75 ± 2% Touch dry: 30 min. Hard dry : 24 hrs.
NOTE:
It must not be used for splits wider than 1cm before treatment.
Application Methods Cleaning of Tools
APPLICATION DATA Special Gun. Water
SURFACE PREPARATION Surface to be sealed should be sound dry, free of oils, dust mortar spatter, release agents, old caulks, intermediate old paint or other contaminants.
STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
MISCELLANEOUS DATA The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
ACRYLIC LATEX CAULK SUPER SEAL DESCRIPTION
RECOMMENDED USE
A high solid Styrene-Acrylic base sealant filler which is flexible, has high adhesion and good weather resistance along with resistance to algae/moss/fungus. For filling up splits and parties in door and windows as well as sanitary pipes.
Colors Specific Gravity Solid by Weight % Drying Time
TECHNICAL INFORMATION White 1.68 ± 2% 70 ± 2% Touch dry : 2 hrs. Recoatable: 6 hrs.
NOTE:
It must not be used for splits wider than 1 cm before treatment.
Application Methods Cleaning of Tools
APPLICATION DATA Special Gun. Water
SURFACE PREPARATION Surface to be sealed should be sound dry, free of oils, dust mortar spatter, release agents, old caulk, intermediate old paint or other contaminants.
STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
MISCELLANEOUS DATA The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use.
18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
SWIMMING POOL DESCRIPTION
A chlorinated rubber base paint having good color retention, high resistance to severe weather conditions, durability and flexibility.
RECOMMENDED USE
For use on concrete, swimming pool etc.
Flash point
TECHNICAL INFORMATION White, Blue. Smooth & Matt. 14 - 16 Poise. 1.44 ± 0.05 70 ± 5% 5 - 6 m 2/Lit. Touch dry: 15 - 20 min. Hard dry : 2 - 4 hrs. 35ºC
NOTE:
It must not be used for splits wider than 1 cm before treatment.
Colures Finish Viscosity (25ºC) Specific Gravity Solid by Weight % Theoretical Spreading Rate Drying time
APPLICATION DATA Brush, Spray, Roller. Application Methods Ready for use, could be diluted with Synthetic Thinner. Thinning / Cleaning of Tools (D.F.T.) 100 microns. Film Thickness Guiding Data for Airless Spray Nozzle Tip: 0.015" - 0.20" Nozzle Pressure: 2200 P.S.I SURFACE PREPARATION
Surface must be clean, dry and free from oil grease, dirt etc...
STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
MISCELLANEOUS DATA The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use.
18 month. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
(B)THERMAL INSULATING PAINTS I NTUMESCENT PAINT
FIRE RETARDANT PAINT
FIRE RETARDANT CLEAR
FIRE RETARDANT THINNER
CAVALIER THERMAL I NSULATING PAINT
INTUMESCENT PAINT DESCRIPTION
A special resin base intumescent paint developed for protection from fire. The dried film gives resistance against fire and protection to base substrate.
RECOMMENDED USE
As an intumescent top coat paint on wood, steel, concrete etc.
Colors Finish Solid by Volume % Theoretical Spreading Rate Specific Gravity Drying Time
Fire Resistance Flash Point
TECHNICAL INFORMATION White Matt or Silky 60 ± 2% 3 m2/Lit. per coat. 1.20 ± 0.05 Touch Dry: 2 hrs. Recoat Interval: 24 hrs. Hard Dry: 48 hrs. Temperature, humidity, air movment, film thickness and number of coats all affect the drying time. Direct : 600ºC: 30 min. Indirect : 600°C: 2 hrs. 29ºC
APPLICATION DATA Brush, Roller or Spray. Application Methods 5 - 10% by National Thinner No.110 Thinning (Max. Vol.) (D.F.T.) 200 microns. Film Thickness (W.F.T.) 380 microns. Guiding Data for Airless Spray Nozzle Orifice: 0.0017" Nozzle Pressure: 2200 P.S.I. Atomizing Pressure: 50 P.S.I. SURFACE PREPARATION
Surface should be thoroughly cleaned, dry and primed. 1) Apply first thin coat. 2) Apply second coat. 3) Apply third coat for better fire retardant properties.
1/2
INTUMESCENT PAINT MISCELLANEOUS DATA STORAGE
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.
HANDLING
Handle with care, mix well before use.
SHELF LIFE
18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
SAFETY / HEALTH
NOTE:
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2
FIRE RETARDANT PAINT DESCRIPTION
RECOMMENDED USE
Colors Finish Solid by Volume % Theoretical Spreading Rate Specific Gravity Drying Time:
Fire Resistance Flash Point
A solvent special resin base fire-retardant coating developed for giving protection against fire. When applied on a surface gives fire resistance and protects the base surface. As a fire retardant topcoat on wood, steel, concrete, etc. TECHNICAL INFORMATION White Matt 55% ± 2 2.5 m2/Lit. 1.25 ± 0.05 Touch Dry: 1 - 2 hrs. Recoat Interval: 10 - 12 hrs. Hard Dry: 24 hrs. Temperature, humidity, air movment, film thickness and number of coats all affect the drying time. Direct : 400ºC : 30 min. Indirect : 400°C : 2 hrs. 29ºC
APPLICATION DATA Brush, Roller or Spray. Application Methods 5 - 10% by National Fire Retardant Thinner . Thinning (Max. Vol.) (D.F.T.) 100 microns. Film Thickness (W.F.T.) 180 microns. Guiding Data for Airless Spray Nozzle Orifice: 0.0017" Nozzle Pressure: 2200 P.S.I. Atomizing Pressure: 50 P.S.I. SURFACE PREPARATION
Surface should be thoroughly cleaned, dry. 1) Apply first thin coat. 2) Apply second coat. 3) Apply third coat for better fire retardant properties.
1/2
FIRE RETARDANT PAINT MISCELLANEOUS DATA STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2
FIRE RETARDANT CLEAR A solvent synthetic resin base Fire Retardant Clear specially developed to give a clear transparent finish which when applied protects the surface from fire. Suitable for use on wood and other surfaces making it fire retardant by resisting the fire for a prolonged period.
DESCRIPTION
RECOMMENDED USE
TECHNICAL INFORMATION Clear, Transparent. Semigloss. 37 % ± 2 4 m2/Lit. 0.94 ± 0.05 Touch Dry: 1 - 2 hrs. Recoat Interval: 10 - 12 hrs. Hard Dry: 24 hrs . Temperature, humidity.air movment, film thickness and number of coats will all affect the drying time. Direct : 600ºC: 30 min. Indirect : 600°C: 1 hrs. 32ºC
Colors Finish Solid by Volume % Theoretical Spreading Rate Specific Gravity Drying Time
Fire Resistance Flash Point
APPLICATION DATA
Brush, Roller or Spray. 5 - 10% by National Thinner No.110 . (D.F.T.) 100 microns. (W.F.T.) 270 microns. Guiding Data for Airless Spray Nozzle Orifice: 0.0017" Nozzle Pressure: 2200 P.S.I. Application Methods Thinning (Max. Vol.) Film Thickness
SURFACE PREPARATION
Surface should be thoroughly cleaned, dry. (1) Apply first thin coat National Fire Retardant Paint
:
2 - 3 coats
(2) Apply second coat National Fire Retardant Clear
:
1 coat
:
3 coats
OR
(3) Apply National Fire Retardant Clear
1/2
FIRE RETARDANT CLEAR MISCELLANEOUS DATA STORAGE
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.
HANDLING
Handle with care, mix well before use.
SHELF LIFE
18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
SAFETY / HEALTH
NOTE:
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2
FIRE RETARDANT THINNER DESCRIPTION
A special Thinner for Fire Retardant Coating.
RECOMMENDED USE
As reducer Thinner for Fire Retardant Coating. TECHNICAL INFORMATION
Appearance
Transparent Liquid.
Specific Gravity @ 15 ºC
0.77 - 0.79
Viscosity by Fordcup B4
12 - 14 Seconds.
Odour
Mild
Flash Point
41ºC
Refractive Index @ 20°C
1.432
ASTM D-1218 Distillation Range @ 101,3kpa
150 - 197ºC
(ASTM D-1078)
STORAGE
HANDLING SHELF LIFE
SAFETY / HEALTH
NOTE:
MISCELLANEOUS DATA The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use.
24 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
CAVALIER THERMAL INSULATING PAINT DESCRIPTION
RECOMMENDED USE
An Insulating paint based on water base elastomeric Acrylic resin. It contains special hollow ceramic microspheres as primary filler, which mainly functions for thermal insulation. The dried film has good flexibility, adhesion, toughness and excellent water resistance and UV resistance. It contains antifungal and antibacterial additives. Most suitable as roof coating, as water proofing and thermal insulating material. Can be applied on cementitious surfaces, metal roofs for commercial and residential buildings. Also useful for duct coating insulation.
Flash Point
TECHNICAL INFORMATION White and Light colors. Matt / Rough 56% ± 2% 1.0 - 0.6 m 2/Lit. (depending on thickness). 1.05 ± 0.05 Touch Dry: 4 - 6 hrs. Recoat Interval: 12 - 16 hrs. Temperature, humidity, air movement, film thickness and number of coats all affect the drying time. Water base.
Application Methods Thinning (Max. Vol.) Thinning / Cleaning of Tools Film Thickness
APPLICATION DATA Roller, Spray, long haired brush or knife applicator. 5% depending on the method of application. Water (D.F.T.) 600 -1000 microns.
Colors Finish Solid by Volume % Theoretical Spreading Rate Specific Gravity KG/L Drying Time
SURFACE PREPARATION Surface should be thoroughly cleaned, dry and applied as follows:-. : 1 coat National Acrylic Primer (W.B.) OR : 1 coat National Thermal Insulating Paint (1:1 diluted) : 2 coats National Thermal Insulating Paint For galvanized surface use National Wash Primer before application.
1/2
CAVALIER THERMAL INSULATING PAINT MISCELLANEOUS DATA STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2
(C) ANTI CARBONATION SYSTEM
PENETRATING SILOXANE PRIMER SEALER
AQUA SILOXANE PRIMER
ALIPHATIC ACRYLIC H.B.
PROTECT SEAL
PENETRATING SILOXANE PRIMER SEALER DESCRIPTION
RECOMMENDED USE
A special solvent based polysiloxane primer sealer, with excellent penetrating and good sealing properties. It penetrates deeply into the pores of the cement concrete and masonry surface, resulting better water repellant properties. It has excellent resistance to alkali, moisture and light. As Penetrating Primer Sealer for interior and exterior concrete, plaster asbestos, brick work, etc… TECHNICAL INFORMATION
Colors
Clear
Finish
Smooth, Matt.
Viscosity
20 ± 2%
Specific Gravity KG/L
0.91 ± 0.02
Solid by Weight %
4 - 5 m 2/Lit. (Depends on surface and film thickness).
Penetration) Drying Time
2 - 3 mm. Touch Dry : 1 hrs. Recoatable: 2 - 3 hrs. Temperature, humidity, air movement and film thickness all affect the drying time. 25ºC.
Flash point
APPLICATION DATA Application Methods Thinning (Max. Vol.) Thinning / Cleaning of Tools Guiding Data for Airless Spray Conv. Spray Requirements Recommended System
Brush, roller or spray. Ready to use. National GP Thinner. Nozzle Tip: 0.025" Nozzle Pressure As low as possible. As low as possible. Apply one coat of National Penetrating Siloxane Sealer for masonry on dry and clean surface. On too much porous surface apply two coats. Then apply recommended system. MISCELLANEOUS DATA
STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 6 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
AQUA SILOXANE PRIMER DESCRIPTION
RECOMMENDED USE
A special solvent based polysiloxane primer sealer, with excellent penetrating and good sealing properties. It penetrates deeply into the pores of the cement concrete and masonry surface, resulting better water repellant properties. It has excellent resistance to alkali, moisture and light. It contains antifungal and antibacterial properties. As Penetrating Primer Sealer for interior and exterior concrete, plaster asbestos, brick work, etc… TECHNICAL INFORMATION
Colors
Clear
Finish
Smooth, Matt.
Viscosity
16 ± 2%
Specific Gravity KG/L
1.00 ± 0.05
Solid by Weight %
4 - 5 m 2/Lit. (Depends on surface and film thickness).
Penetration) Drying Time
2 - 3 mm. Touch Dry : 1 hrs. Recoatable: 2 - 3 hrs. Temperature, humidity, air movement and film thickness all affect the drying time. Water base.
Flash point
APPLICATION DATA Brush, roller or spray. Application Methods Ready to use. Thinning (Max. Vol.) Ready to use, if required water to be used. Thinning / Cleaning of Tools Guiding Data for Airless Spray Nozzle Tip: 0.025" Nozzle Pressure As low as possible. As low as possible Conv. Spray Requirements Apply one coat of National Aqua Siloxane Primer for masonry on dry Recommended System and clean surface. On too much porous surface apply two coats. Then apply recommended system. MISCELLANEOUS DATA STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 12 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
ALIPHATIC ACRYLIC H.B. DESCRIPTION
It is special Aliphatic Acrylic H.B. based on methacrylate polymer. Has tough dry film giving long lasting performance, very good adhesion and weather resistance. Additionally it has excellent resistance against water and U.V. radiation and anti-carbonization properties.
RECOMMENDED USE
Specifically developed as a top coat on National Penetrating Siloxane Primer Sealer, for application on cementatious surface, walls, etc.
Colors Finish Volume Solids Specific Gravity KG/L Theoretical Spreading Rate Film Thickness Drying Time @ 30ºC.
TECHNICAL INFORMATION As per shade card. Matt. 55 ± 2% 1.40 ± 0.05 (for white and pastel shades). 7 - 8 m 2/Lit. per coat (D.F.T.) 70 microns per coat (Depends on surface). (W.F.T.) 130 microns per coat (Depends on surface). Touch Dry: 1 hr. Recoatable: 3 - 4 hrs.
Hard Dry : 24 hrs.
Flash point
Temperature, humidity, air movement and film thickness all affect the drying time. 32ºC.
APPLICATION DATA Roller or spray. Application Methods 5% depending on the method of application. Thinning (Max. Vol.) Thinning / Cleaning of Tools National Acrylic Thinner. Guiding Data for Airless Spray Nozzle Tip: : 0.018" - 0.020" Nozzle Pressure: 2100 P.S.I. Automizing Pressure: 50 P.S.I. Conv. Spray Requirements Base : Hardener : N.A. Mixing Ration (Volume) N.A. Pot Life @ 30ºC. Recommended System National Penetrating Siloxane Primer Sealer: 1 coat. National Aliphatic Acrylic H.B. : 2 coats. STORAGE
HANDLING SHELF LIFE SAFETY / HEALTH
NOTE:
MISCELLANEOUS DATA The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed. Handle with care, mix well before use. 18 months. - Ensure good ventilation during application and drying. - Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. - Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice.
PROTECT SEAL DESCRIPTION
National Protect Seal has been specifically designed to meet the requirements of durable, protective, water proofing membrane for concrete surfaces. It is based on Acrylic emulsion, with inert pigment and has good flexibility, abrasion and elastomeric properties. It contains anti-fungal and anti-bacterial additives.
RECOMMENDED USE
Good mechanical and abrasion resistant properties, mostly suitable for curb stone, bridges, car parking areas, since it has excellent anticarbonation, chloride ion stability, chemical resistance, suitable for concrete surfaces. TECHNICAL INFORMATION
Colors
White and pastel colors.
Finish
Satin.
Volume Solids
57 ± 2%
Specific Gravity KG/L
1.30 ± 0.05
Theoretical Spreading Rate Film Thickness
6 m2/Lit. per coat.
Drying Time @ 30ºC.
Touch Dry: 30 min. Recoatable: 8 - 10 hrs. Temperature, humidity, air movement and film thickness all affect the drying time.
Flash point
Water base.
(D.F.T.) 100 microns per coat (Depends on surface). (W.F.T.) 175 microns per coat (Depends on surface).
APPLICATION DATA Application Methods
Brush, roller or spray.
Thinning (Max. Vol.)
5% depending on the method of application.
Thinning / Cleaning of Tools Guiding Data for Airless Spray Conv. Spray Requirements
Water. Nozzle Tip: : 0.017" - 0.020" Nozzle Pressure: 2200 P.S.I. Automizing Pressure: 30 - 40 P.S.I.
Mixing Ration (Volume)
Base : Hardener : N.A.
Pot Life @ 30ºC. Recommended System
N.A. National Acrylic Primer (W.B.) : 1 coat : 2 - 3 coats. National Protect Seal
For metal, use suitable primer
* Thick material can be applied by trowel, without dilution.
1/2
PROTECT SEAL MISCELLANEOUS DATA STORAGE
The product must be stored according to National Regulations. The product should be kept in cool and well ventilated place, protected from heat and direct sunlight at temp 5-35ºC. Containers must be kept tightly closed.
HANDLING
Handle with care, mix well before use.
SHELF LIFE
18 months.
SAFETY / HEALTH
-
-
NOTE:
Ensure good ventilation during application and drying. Avoid contact with skin and eyes. While painting it is advisable to wear eye protector. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. To remove splashes from skin; use soap and water or a recognized skin cleaner. Keep out of reach of children.
We warranty the quality of our product and this data sheet represents test results and practical experience obtained under controlled conditions. We reserve the right to change data without prior notice. 2/2