The tightening torque of the front panel screws must be 0.25 N.m (0.2375 N.m to 0.2625 N.m).
•
The SMA tightening torque must be 0.8 N.m to 1.2 N.m.
•
The 7/16 tightening torque must be 25 N.m (24 N.m to 27 N.m).
•
The N tightening torque must be 1.7 N.m (1.6 N.m to 1.8 N.m).
Note: This procedure requires a service reduction from the Node B estimated at ten minutes. Notify the OMC administrator Important! Respect bend radius of cables while tightening connectors. Pay attention to cable torsion and bend radius during maintenance operations
.................................................................................................................................................................................................................................... Alcatel-Lucent – Proprietary NN-20500-009 8-49 Issue 6.07 June 2010 Use pursuant to applicable agreements
