Advance Trick & Tips NX _Teamcenter (New)

ADVANCE TRICKS & TIPS

2014

VERSION-V0.1 NX 9 UNIGRAPHICS & TEAM CENTER 10.1

By Kishor Bhatia Tricks & Tips Version- V0.3 1/1/2014

Advance Tricks & Tips - NX 9 & Team Center 10.1 V-03

[Document title] ADVANCE TRICKS & TIPS NX 9 & TC 10 .TCTEAceCANTER [Version]V03 8.3 [Reference]Document-

2014

2/34 [Author]- KISHOR BHATIA [Date] -2014

Change History Version

Date

Name

SIR/MSG #

Details

V0.1

7 JAN 2013

Kishor Bhatia

V0.2

7 FEB 2013

Kishor Bhatia

Added Point from NX 7.5 & Teamcenter 8

V 0.3

23 Dec 2013

Kishor Bhatia

Added points from NX 9 & Teamcenter 10.1


2014

Contents Change History ............................................................................................................................................. 2 Creation of New file in NX............................................................................................................................. 6 Constrained ............................................................................................................................................... 7 Roles setting in NX .................................................................................................................................... 8 Orientation, Pan, Rotate, Zoom, Option ................................................................................................... 9 Isometric View Vs Orthographic View ...................................................................................................... 9 Sketch required outside in model tree ................................................................................................... 11 To reduce model tree and make sketch internal .................................................................................... 12 Advance Options Detailing or Drafting ....................................................................................................... 17 How to change sketch plane. If you have created sketch at wrong plane ............................................. 18 How to check if sketch is under constrained? ........................................................................................ 19 How to create stiffener in NX? Is there any specific command? ............................................................ 19 How to change orientation of datum axis to exact view as required? ................................................... 19 To make hole at center of circular body ................................................................................................. 20 How do we get axis at center of selected face? ..................................................................................... 21 How to project circular edge reference in sketch plane? ....................................................................... 22 How can I remove outside area with same sketch? ............................................................................... 22 Question How to see half section in NX? ................................................................................................ 26 Technical Setting Documentation ............................................................................................................... 29 TC Subscription Manager, ....................................................................................................................... 29 Schedule Manager, ................................................................................................................................. 29 TC Projects .............................................................................................................................................. 29 Team center Visualization....................................................................................................................... 29 Team center Unified Configuration/Customization................................................................................ 29 Teamcenter Modules .............................................................................................................................. 29 PSE, Access manager, .............................................................................................................................. 29 Change Management, ............................................................................................................................. 29


2014

BMIDE, .................................................................................................................................................... 29 OTW Install etc ........................................................................................................................................ 29 PLM Processes (BOM, Change Management etc) .................................................................................. 29 Testing and Implementation of Team center ......................................................................................... 29 Production /QA/DEV environments........................................................................................................ 29 Proactively identify Business needs, ....................................................................................................... 29 Draft the roadmap for long term solutions ............................................................................................ 29 Optimize solutions .................................................................................................................................. 29 Development process ............................................................................................................................. 29 Advance Tricks & Trips - Team Center ........................................................................................................ 30 How to open Assembly load options ...................................................................................................... 30 Reference sets..................................................................................................................................... 31 Part revision status ............................................................................................................................. 32 Creating new revision ............................................................................................................................. 33 Create new item.................................................................................................................................. 33


2014

Advance Options in Unigraphics (NX 9) Work Bench General Sketcher Part Modeling Assembly Drafting or Detailing Sheet Metal


2014

Creation of New file in NX

Start NX from TC and choose New. From the menu that opens, you’ll choose the most suitable base for the current need of design, i.e. Template. All of the templates are regular NX-parts, but they have built in settings and basic geometry for different needs. Make sure that chosen units are Millimeters Choose the first template, Model, from the list. Using the Assign button you can give the next available number or revision to the item (3). Template parts have basic attributes, which you can modify by selecting Attributes... (4). It is recommended that you rename the part so that it is easy to identify. A new name is given to the part using the Part Name attribute.


2014

Sketcher

Observation ( if any command activate) 1. Moving the geometry is quite difficult. 2. Dimension line also not movable. 3. After constraint we are able to move dimension line

Constrained CONSTRAINED: is the logical operation to perform on geometry to restrict the shape and position with respect to references. Fully Constrained – Dark Brown Geometry Under constrained – Green Over constrained- Orange Best way: 1. Geometric constrained 2. Dimensional constrained


2014

Roles setting in NX

In NX it is possible select different user roles according to how much NX experience the user has. After the installation, the default role is set to Essentials. This means that the menus will be narrow and simplified.


2014

Orientation, Pan, Rotate, Zoom, Option F8--Orientate the view to perpendicular F1--Pan – Press (MB2+MB3)=shift+MB2 F2- Zoom in- out- Scroll (MB2)= Ctrl+MB2 F3- Rotating Geometry- Press (MB2) F6+ Any Mouse Button (MB1 or MB2) – Zoom in & Zoom out F7- Symbol change to Rotating Geometry

Isometric View Vs Orthographic View Fit to screen- Press Home Button

Isometric View—Press Home Button

Orthographic View - Press End Button


2014

Customer Defaults, continuous auto dimensioning off •

Let’s make sure that the automatic dimensioning of sketches is turned off so that the skething would be more similar with older CAD-software.

•

Select File Utilities Customer Defaults Sketch Inferred Constraints and Dimensions Dimensions-tab and make sure that none of the checkboxes are selected. After changes have been made to Customer Defaults, the program has to be restarted in order for the changes to start functioning. We will try the Auto Dimensioning later on.


Part Modeling

Sketch required outside in model tree

2014


2014

To reduce model tree and make sketch internal MB3+ select make sketch internal

How to Solve this kind of issue


Search in TC is case sensitive.

2014


2014


To solve this issue both model and drawing need to checkout.

2014

Advance Tricks & Tips - NX 9 & Team Center 10.1 V-03 Select Model+ MB3 check in / Check out

2014


2014

Advance Options Detailing or Drafting Cont+ F – Fit to in Screen Error Teamcenter: Login

Open the Teamcenter portal. Use User ID, password and database as provided by the course leader. From the Quick Links – menu select Home (1), which opens your desktop. The contents of your desktop shows up in the window on the right. Now you can see the ”Projektit” folder (2), where you can create your own projects in subfolders. NX is started from within Teamcenter (3). NX tries to open the target that you have selected. If you want to deselect a chosen part, choose the selected part again with CTRL-key pressed.


2014

How to change sketch plane. If you have created sketch at wrong plane Solution 1


2014

How to check if sketch is under constrained? Click in Constrain button then sketch will display in brown color and status bar show – sketch is fully constrained.

How to create stiffener in NX? Is there any specific command? How to change orientation of datum axis to exact view as required?

DEFAULT ORIENTATION

REQUIRED ORIENTATION


2014

To make hole at center of circular body To make hole at center of circular body – need to select circular edge of cylindrical body

Advance Tricks & Tips - NX 9 & Team Center 10.1 V-03 How do we get axis at center of selected face?

2014


2014

How to project circular edge reference in sketch plane? A. By using option project curve you can project circular edge reference in sketch plane.

How can I remove outside area with same sketch?

Output Result


2014

Advance Tricks & Tips - NX 9 & Team Center 10.1 V-03 Error: NX templates opening wrong from TC

Right Metso customize Template of NX Solution: Mapping of CAD Drive ( W or Y ) Has to be connected

Wrong/ Or Default NX template

2014


2014


2014

Question How to see half section in NX? Inside of Sketch mode-- View >Edit work section

SECTION CUT AT X- AXIS

SECTION CUT AT- Y AXIS

SECTION CUT AT Z-AXIS Select Plane from marked highlighted area in view section windows as per section cut requirement in X,Y,Z axis direction .


Tools Bar

2014


2014


Technical Setting Documentation TC Subscription Manager, Schedule Manager, TC Projects Team center Visualization Team center Unified Configuration/Customization Teamcenter Modules PSE, Access manager, Change Management, BMIDE, OTW Install etc PLM Processes (BOM, Change Management etc) Testing and Implementation of Team center Production /QA/DEV environments Proactively identify Business needs, Draft the roadmap for long term solutions Optimize solutions Development process

2014


2014

Advance Tricks & Trips - Team Center How to open Assembly load options File Options Assembly load options

•Teamcenter Navigator Assembly load options...

•Open Part File Assembly load options


2014

Reference sets

You can choose what reference set is loaded first when assembly is opened

•By default Lightweight model is loaded first (top of the list)

•Sometimes it is better if parts are loaded with Model reference set

•To change this move Model to top of the list by using arrows


2014

Part revision status You can choose if you want to open revisions that are released to Aton Latest working shows latest revisions Any status; Working shows revisions that have released status, if there are those available

Advance Tricks & Tips - NX 9 & Team Center 10.1 V-03 Creating new revision

2014

 When item revision is released it cannot be modified in NX  To make a new revision use Save as  File Save as...  Save Part File as –window opens  Change Action to Create New Revision  New revision is assigned automatically (Revisions go from 0 1 2)  Click OK  New revision will appear to Team center

Create new item

If you save part as new item it will be replaced to every assembly structure that is open in NX


Still continue Working on this document………………………….

2014

Advance Trick & Tips NX _Teamcenter (New)

Recommend Documents