Common Lab Values. not all, but some. i respectfully give credit to those whom i copied some or most of the info therein. I simply gathered the information and collaborated it to others. if any vio...
Full description
Full description
Strength and weaknesses
uud6dku6Full description
Common Lab Values for Nursing
news values in journalism
Drive Test Methodology & SOW - 3G
3G RAN NSN HSDPA RRM & parameters
3G RAN NSN HSDPA RRM & parametersFull description
Deskripsi lengkap
Commisioning
3G mobility
list of ericsson 3G alarmsDescrição completa
Received Chip Energy over Noise (EcNo) = RSCP/UTRA RSSI • quality of received signal
Signal Interference Ratio (SIR) = RSCP/ISCP • ISCP = Interference Signal Code Power (see text)
Received Total Wideband Power (RTWP) • measurement interval: 100 ms;UNIT-dbm • range/step: -112 dBm ... –50 dBm / 0.1 dBm coded as: INTEGER (0..621) [NBAP] Reported Value RTWP_LEV_000 RTWP_LEV_001 RTWP_LEV_002 RTWP_LEV_003 ... ... ... . RTWP_LEV_619 RTWP_LEV_620 RTWP_LEV_621
Signal Interference Ratio (SIR) • unit: dB • measurement interval: 80 ms • range/step: -11 dB ... 20 dB / 0.5 dB • calculation: SIR = (DPCCH RSCP / ISCP) x SF • coded as: INTEGER(0..63) *NBAP+ Reported Value UTRAN_SIR_00 UTRAN_SIR_01 UTRAN_SIR_02 UTRAN_SIR_03 ... ... ... UTRAN_SIR_61 UTRAN_SIR_62 UTRAN_SIR_63
d Bm
Signal Interference Ratio (SIR) • unit: dB • measurement interval: 80 ms • range/step: -11 dB ... 20 dB / 0.5 dB • calculation: SIR = (DPCCH RSCP / ISCP) x SF • coded as: INTEGER(0..63) *NBAP+ Reported Value UTRAN_SIR_00 UTRAN_SIR_01 UTRAN_SIR_02 UTRAN_SIR_03 ... ... ... UTRAN_SIR_61 UTRAN_SIR_62 UTRAN_SIR_63
Range SIR < -11.0 dB -11.0 £ SIR < -10.5 -10.5 £ SIR < -10.0 -10.0 £ SIR < -9.5 d
Unit dB dB dB dB
19.0 £ SIR < 19.5 dB 19.5 £ SIR < 20.0 dB 20.0 £ RSCP dB
dB dB dB
UL Measurements • UL SIR Target • (UL) SIR per call • (UL) SIR Error per call • UL BLER BLER (ca (calc lcul ulat ated ed on beha behalf lf of of CRCI CRCI)) per per call call • QE = BER per call, per Node B • RTWP • UL RLC AM Retransmission Rate per call • EE-DCH DCH Pr Provid ovided ed Bit Rate Rate per per pri prio ority rity cla class • EE-DCH DCH Non-s on-ser ervi vin ng Rel Rela ative tive Gra Grant DOWN DOWN Commands per priority class • opt. opt.:: UL UL TrCh TrCh throug throughp hput, ut, UL UP IP IP thro through ughpu putt • E-DCH HARQ Failure (Rel. 6 FP CTRL)
Repo Report rted ed Valu Value e RTWP RTWP Valu Value e RTWP_LEV_000 0 RTWP_LEV_001 1 RTWP_LEV_002 2 RTWP_LEV_003 3 ... ... ... . .. RTWP_LEV_619 619 RTWP_LEV_620 620 RTWP_LEV_621 621
DL Measurements • Transmitted Carrier Power (R99) per cell • Transmitted Carrier Power of all non HS codes (R5/6) per cell • DL RLC RLC AM Retr Retran ansm smis issi sion on Rate Rate per per cal calll • Transmitted Code Power per call (per RLS, RL or per Node B) • Uu RTT (DL) • HSHS-DS DSCH CH Cred Credit itss (eq (equ uiva ivalen lent of of CQI CQI)) per per call all • HSHS-DS DSCH CH Pro Provid vided Bit Bit Rate Rate per per prio riority rity cla class • HS-DSCH Required Power per priority class • opt.: opt.: DL TrCh TrCh thro through ughpu put, t, DL DL UP IP thr throug oughp hput ut • P-CPICH Ec/N0 f1 and f2 • P-CPICH RSCP f1 and f2 • Pathloss f1 and f2 • UTRA RSSI f1 and f2 • GSM RSSI per GSM f • DL BLER
Rang Range e Unit Unit RTWP < -112.0 -112.0 <= RTWP < -111.9 dBm -111.9 <= RTWP < -111.8 dBm -111.8 <= RTWP < -111.7 dBm -50.2 <= RTWP < -50.1 dBm -50.1 <= RTWP < -50.0 dBm -50.0 <= RTWP dBm
Repo Report rted ed Valu Value e RTWP RTWP Valu Value e RTWP_LEV_000 0 RTWP_LEV_001 1 RTWP_LEV_002 2 RTWP_LEV_003 3 ... ... ... . .. RTWP_LEV_619 619 RTWP_LEV_620 620 RTWP_LEV_621 621
Rang Range e Unit Unit RTWP < -112.0 -112.0 <= RTWP < -111.9 dBm -111.9 <= RTWP < -111.8 dBm -111.8 <= RTWP < -111.7 dBm -50.2 <= RTWP < -50.1 dBm -50.1 <= RTWP < -50.0 dBm -50.0 <= RTWP dBm
Range Unit SIR < -11.0 dB -11. -11.0 0 <=S <=SIR IR < -10. -10.5 5 dB dB -10. -10.5 5 <=S <=SIR IR < -10. -10.0 0 dB dB -10 -10.0 <= SIR SIR < -9. -9.5 5 dB dB 19.0 9.0 <= SIR SIR < 19.5 dB 19.5 9.5 <= SIR SIR < 20.0 dB 20.0 <= RSCP dB