20740A_setupguide.pdf

Course 20740A: Installation, Storage, and Compute with Windows Server 2016 Microsoft Hyper-V Classroom Setup Guide Contents Microsoft Labs Online

1

Digital Courseware

2

Introducing Microsoft Hyper-V

2

Windows 10 Virtual Machine Activation

3

Setup Overview

4

Classroom Requirements

4

Hardware

4

Software

5

Classroom Configuration

5

Instructor Computer Checklist

5

Instructor Computer Setup

6

1.

Install the Hyper-V server role

7

2.

Install the virtual machine files

8

3.

Create virtual switches

11

4.

Create a setup share

11

5.

Copy the virtual machine files to the student computer

11

6.

Run the VM-Pre-Import script

12

7.

Import the virtual machines on the instructor computer

12

8. Configure the virtual machines on the instructor computer

13

9. Configure the host computer to boot to the 20740A-LON-HOST1.vhd

14

10.

Install the PowerPoint slides

15

Student Computer Checklist

16

Student Computer Setup

16

1.

Install the Hyper-V Server role

16

2.

Install the base image and virtual machine files

16

Appendix A Keyboard Layout

17

Appendix B: Activating the Windows 10 Virtual Machine

18

To Configure the MSL-TMG1 Virtual Machine

19

Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license t o these patents, trademarks, copyrights, or other intellectual property. The names of manufacturers, products, or URLs are provided for informational purposes only and Microsoft makes no representations and warranties, either expressed, implied, or statutory, regarding these manufacturers or the use of the products with any Microsoft technologies. The inclusion of a manufacturer or product does not imply endorsement of Microsoft of the manufacturer or product. Links may be provided to third party sites. Such sites are not under the control of Microsoft and Microsoft is not responsible for the contents of any linked site or any link contained in a linked site, or any changes or updates to such sites. Microsoft is not responsible for webcasting or any other form of transmission received from any linked site. Microsoft is providing these links to you only as a convenience, and the inclusion of any link does not imply endorsement of Microsoft of the site or the products contained therein. © 2016 Microsoft Corporation. All rights reserved. Microsoft and the trademarks listed at http://www.microsoft.com/trademarks are trademarks of the Microsoft group of companies. All other trademarks are property of their respective owners.

Product Number: 20740A

Version 1.2

Course 20740A: Installation, Storage, and Compute with Windows Server 2016

1

Microsoft Labs Online Microsoft Labs Online (online or hosted labs) are available for this and other Microsoft Official Courseware (MOC) courses. This provides an alternative to the lab setup and configuration that is outlined in this document, where the course virtual machines are accessed on Microsoft Learning’s hosted lab platform, rather than on physical local machines.

Requirement for accessing hosted labs Hosted labs still require that each student have a host computer to access the course lab environment, but the host computer does not need to meet the same specifications as when the virtual machines are running locally. The general requirements for student machines are as follows: •

A valid operating system such as Windows 7 or newer

•

Microsoft Internet Explorer, or another supported web browser

•

Internet access

You should refer to your individual hosting provider for more specific details. In addition, there may be some variations in steps for labs that are run in a hosted environment as opposed to a local environment. Details of any variations in lab steps can be found in the Lab Notes on the hosted lab platform. If you are using hosted labs instead of on-premises labs, become familiar with how to access and configure the labs. Ensure that you are ready to demonstrate their use to students when starting the class, and that everything is in place for students to have a smooth experience. You can purchase Microsoft Labs Online for use during course delivery at the same time you order the course materials.

Note: Some labs may not be available on the Microsoft Labs Online platform due to specific requirements in the lab steps, such as labs with a “boot to vhd” or "native boot" requirement. Therefore, you should evaluate the labs in your course before deciding whether to use local labs or Microsoft Labs Online labs.

2


Digital Courseware If you are using digital courseware via the Skillpipe reader from Arvato, if the course contains a “boot to vhd” or “native boot” scenario in some or all of the labs, students will not be able to view the online courseware content and lab steps in the Skillpipe reader while their host machine is offline. In this particular scenario, use one of the following options: 1. Have two network interface cards (NICs) in the host machines. 2. Print out the Lab steps for the particular module. 3. Ask student who have their own devices to bring them to the class. 4. Configure two virtual machines prior to the class to allow access to the content offline. Depending on your particular situation, consider implementing one of the above options. Further details and considerations for these workarounds and options are available on the Born To Learn website at http://borntolearn.mslearn.net, and have also been sent out via partner and Microsoft Certified Trainer (MCT) newsletters.

Important: Additional virtual machine configuration may be required. Therefore, you should allow enough time to assess your situation and make appropriate decisions.

Introducing Microsoft Hyper-V Note: This setup requires Windows Server 2012 with Hyper-V. To import virtual machines successfully to Hyper-V in Windows Server 2012 you will have to run the VM-Pre-Import scripts, which will link the differencing drives to the Base and Middle-Tier images in the D:\Program Files\Microsoft Learning \20740\Drives\ VirtualMachineName \Virtual Hard Disks\folders. This learning product is designed using Hyper-V running on Windows Server 2012. Windows Server 2012 R2 is not supported. Hyper-V is a virtualization technology that allows a single computer to act as a host for one or more virtual machines. The virtual machines use a set of virtual devices that might or might not map to the physical hardware of the host computer. The software that is installed onto the virtual machine is unmodified software that operates exactly as it does when it is installed onto physical hardware.


3

The following definitions will help you with the remainder of this document: •

•

•

•

•

Hyper-V . Hyper-V is a server application that enables users to run a broad range of operating systems simultaneously on a single physical server. Host computer . The physical computer onto which an operating system and the Hyper-V server role have been installed. Host operating system. The operating system that is running on the physical computer. For this course, the only supported host operating system is Windows Server 2012. Virtual machine. The computer that is running inside Hyper-V. In this document, “Hyper-V” refers to the application running on the host, while “virtual machine” refers to the guest operating system and any software that is running inside the Hyper-V application. Guest operating system. The operating system that is running inside the virtual machine.

Note: Pressing CTRL+ALT+DELETE while working with a virtual machine will display the Windows Security page for the host operating system. To close the page, press the ESC key. To access the Windows Security page for a guest operating system, press CTRL+ALT+END. Other than this difference, software on a virtual machine behaves as it would behave on a physical computer. You can configure virtual machines to communicate with the host computer, other virtual machines on the same host computer, other host computers, virtual machines on other host computers, other physical computers on the network, or any combination thereof. The setup instructions that you will follow as part of this classroom setup guide will configure Hyper-V and the virtual machines that run on the host. Changing any of the configuration settings might render the labs for this learning product unusable.

Windows 10 Virtual Machine Activation The virtual machines that you use in this course utilize the Windows 10 operating system, which you must activate. For detailed instructions, refer to “Configure the Virtual Machines on the Instructor Computer” in this document. For more information about this requirement, and for steps about how to obtain product keys for activation, refer to: “Product Key Distribution for Activation of Windows” (for MOC lab virtual machines only) at: http://go.microsoft.com/fwlink/?LinkId=270851

4


Setup Overview The host computers must be set up with the initial release of Windows Server 2012 and must be running on 64-bit hardware. Windows Server 2012 R2 is not supported. For more information about the supported hardware for Hyper-V, refer to: http://www.microsoft.com/hyper-v. For the purposes of this learning product, it is not necessary for the host computers to be able to communicate with another network. However, we recommend that you allow the computers to communicate with each other to make the setup process easier. The following setup procedures assume that the host computers can communicate with each other for setup purposes. You should note the administrator’s user name and password for the host computers, and provide this information to the instructor.

Classroom Requirements This learning product requires a classroom with a minimum of one computer for the instructor and one for each student. Before class begins, use the following information and instructions to install and configure all computers.

Hardware The classroom computers require the following hardware and software configuration:

Hardware Level 7 (Note the changes for the hard disk and RAM configuration) •

•

Processor: 64-bit Intel Virtualization Technology (Intel VT) or AMD Virtualization (AMD-V) processor (2.8 gigahertz (GHz) dual core or better recommended) Hard Disk: Dual 500 gigabyte (GB) hard disks 7200 RPM SATA labeled C drive and D drive

•

RAM: 16 GB or higher

•

DVD/CD: DVD; dual layer recommended

•

Network adapter

•

Sound card with amplified speakers

•

Monitor: Dual SVGA monitors 17” or larger supporting 1440X900 minimum resolution

In addition, the instructor computer must be connected to a projection display device that supports SVGA 1024 x 768 pixels, 16-bit colors. In order to view ILT Multimedia video demonstrations, the instructor computer must have Internet access and bandwidth to allow for video streaming.


5

Software Microsoft Office PowerPoint 2007 or newer is required for the host computer only. Note, PowerPoint is not included in the Training Materials.

Classroom Configuration Each classroom computer will serve as the host for several virtual machines that will run in Hyper-V. Domain or workgroup membership for the host computer does not matter, nor does the network configuration of the host computers. After completing setup, the host computer will be running the initial release of Windows Server 2012 and will be configured to run several virtual machines running Windows Server 2016 and Windows 10.

Estimated time to set up the classroom: 240 minutes

Instructor Computer Checklist 

1. Install the Hyper-V Server role



2. Install the virtual machine files



3. Create virtual switches



4. Create a setup share



5. Copy the virtual machine files to the student computer



6. Run the VM-Pre-Import script



7. Import the virtual machines on the instructor computer



8. Configure the virtual machines on the instructor computer



9. Configure the host computer to boot to the 20740A-LON-HOST1.vhd



10. Install the PowerPoint slides

6


Instructor Computer Setup Use the instructions in the following section to set up the classroom manually. Before starting the instructor computer installation, a supported operating system and Office Power Point 2007 (or newer) must be installed on the computer.

Important: The operating systems installed on the virtual machines in this learning product have not been activated, and each virtual machine is in the Notification state. As stated earlier, you must activate the Windows 10 client virtual machines for each of the steps outlined below. However, you do not need to activate the Windows Server 2012 virtual machines, but you will, at a minimum, need to apply a grace period by running slmgr –rearm at the administrative command prompt and then restarting. This gives a ten-day grace period before the virtual machine returns to the notification mode and subsequent hourly shutdowns. You can view the number of rearms available in the virtual machines by running the command slmgr -dlv. If you require an extended period, you can activate the server virtual machines for 180 days. You do not require a product key to activate the server virtual machines because they are pre-keyed and can be activated automatically by placing them online or activating them over the phone. Once that initial 180-day activation period has expired, you can obtain a second 180-day activation period by running slmgr -rearm, restarting, and then activating the virtual machine as outlined earlier. You can obtain additional context and details on activation states from the Born To Learn website at: http://borntolearn.mslearn.net/mct/general/f/482/t/321279.aspx In addition, when the virtual machine starts for the first time you might be prompted to restart the computer. This is because of the hardware differences on the host computer. You can restart the computer, or you can click Restart Later to close the message.


1. Install the Hyper-V Server role In this task, you will install the Hyper-V server role on the Windows Server 2012 host computer.

Important: If Hyper-V is installed already, you can skip this procedure. 1. In the Server Manager console, on the Manage menu, click Add Roles and Features. 2. On the Before you begin page of the Add Roles and Features Wizard, click Next. 3. On the Select installation type page, select Role-based or feature-based installation, and then click Next. 4. On the Select destination server page, ensure that the local computer is selected, and then click Next. 5. On the Select Server Roles page, select Hyper-V. 6. In the Add Roles and Features Wizard dialog box, click Add Features. 7. On the Select Server Roles page of the Add Roles and Features Wizard, click Next. 8. On the Select features page, click Next. 9. On the Hyper-V page, click Next. 10. On the Create Virtual Switches page, verify that no selections have been made, and then click Next. 11. On the Virtual Machine Migration page, click Next. 12. On the Default Stores page, review the location of Default Stores, and then click Next. 13. On the Confirm Installation Selections page, select Restart the destination server automatically if required. 14. In the Add Roles and Features Wizard dialog box, review the message about automatic restarts, and then click Yes. 15. On the Confirm Installation Selections page, click Install. 16. Ensure that you restart the machine. 17. After the final restart, sign in using the administrator credentials.

7

8


2. Install the virtual machine files After installing the Hyper-V server role, you will need to complete the following steps to copy the base images, middle tiers, and virtual machine files to the server, and then configure the virtual machines.

Extract the course images To extract the base images: 1. From the courseware source files location, double-click Base16D-WS16-TP5.part01.exe. 2. In the Official Microsoft Learning Product License Terms window, click Accept to indicate that you accept the terms in the license agreement. 3. In the WinRAR self-extracting archive window, in the Destination folder text box, ensure that C:\Program Files\Microsoft Learning\Base is listed, and then click Extract. Wait while the base virtual hard disk file is extracted. This might take a few minutes. 4. Repeat steps 1 through 3 for the following base drive: •

Base16B-W10TH2-Office2016.part01.exe

To extract the middle tier images: 1. From the courseware source files location, double-click MT16B-TP5-LON-DC1.part1.exe. 2. In the Official Microsoft Learning Product License Terms window, click Accept to indicate that you accept the terms in the license agreement. 3. In the WinRAR self-extracting archive window, in the Destination folder text box, ensure that C:\Program Files\Microsoft Learning\Base\Drives is listed, and then click Extract. Wait while the middle tier virtual hard disk file is extracted. This might take a few minutes.

To extract the virtual machines (if required for disk space, you can extract the course-specific files to a different drive providing the base images and the middle tiers are located in the default path): 1. From the courseware source files location, double-click 20740A-LON-DC1.part01.exe. 2. In the Official Microsoft Learning Product License Terms window, click Accept to indicate that you accept the terms in the license agreement.


9

3. In the WinRAR self-extracting archive window, in the Destination folder text box, ensure that D:\Program Files\Microsoft Learning\20740\Drives is listed, and then click Extract. 4. Repeat steps 1 through 3 for the following virtual machines: •

20740A-BASE.exe

•

20740A-LON-DC1-B.part01.exe

•

20740A-LON-CL1.part01.exe

•

20740A-LON-SVR1.part01.exe

•

20740A-LON-SVR1-B.part01.exe

•


•


•


•

20740A-LON-SVR5.exe

•

20740A-LON-SVR6.exe

•

20740A-NANO-SVR1.exe

•

20740A-LON-HOST1.part01.exe (Will extract to C:\Program Files \Microsoft Learning\Base)

•

20740A-LON-NVHOST2.part01.exe

•

20740A-scripts.exe

•

20740A-ISOs.part01.exe

Note: After extracting all of the classroom files, you should have the files in the following table installed. File

In folder

Base16D-WS16-TP5.vhd

C:\Program Files\Microsoft Learning\Base

Base16B-W10TH2-Office2016.vhd


20740A-LON-HOST1.vhd


MT16B-TP5-LON-DC1.vhd

C:\Program Files\Microsoft Learning\Base\Drives

VM-Pre-Import-20740A.ps1

D:\Program Files\Microsoft Learning\20740\Drives\

20740A_ImportVirtualMachines.ps1


CreateVirtualSwitches.ps1


TakeVMSnapshot.ps1


LON-HOST1_VM-Pre-Import-20740A.ps1


LON-NVHOST2_VM-Pre-Import-20740A.ps1 D:\Program Files\Microsoft Learning\20740\Drives\

10


File

In folder

20740A-BASE.vhd


20740A-LON-DC1.vhd

D:\Program Files\Microsoft Learning\20740\Drives \20740A-LON-DC1\Virtual Hard Disks

20740A-LON-DC1-Allfiles.vhd 20740A-LON-DC1-B.vhd

20740A-LON-CL1.vhd

D:\Program Files\Microsoft Learning\20740\Drives \20740A-LON-DC1-B\Virtual Hard Disks D:\Program Files\Microsoft Learning\20740\Drives \20740A-LON-CL1\Virtual Hard Disks

20740A-LON-SVR1.vhd 20740A-LON-SVR1-Allfiles.vhd 20740A-LON-SVR1-Disk1.vhd 20740A-LON-SVR1-Disk2.vhd 20740A-LON-SVR1-Disk3.vhd 20740A-LON-SVR1-Disk4.vhd 20740A-LON-SVR1-Disk5.vhd

D:\Program Files\Microsoft Learning\20740\Drives \20740A-LON-SVR1\Virtual Hard Disks

20740A-LON-SVR1-Disk6.vhd 20740A-LON-SVR1-Disk7.vhd 20740A-LON-SVR1-Disk8.vhd 20740A-LON-SVR1-Disk9.vhd 20740A-LON-SVR1-B.vhd 20740A-LON-SVR1-B-Allfiles.vhd

D:\Program Files\Microsoft Learning\20740\Drives \20740A-LON-SVR1-B\Virtual Hard Disks

20740A-LON-SVR2.vhd 20740A-LON-SVR2-Disk1.vhd 20740A-LON-SVR2-Disk2.vhd


20740A-LON-SVR2-Disk3.vhd 20740A-LON-SVR3.vhd 20740A-LON-SVR3-Disk1.vhd 20740A-LON-SVR3-Disk2.vhd 20740A-LON-SVR4.vhd 20740A-LON-SVR4-Disk1.vhd 20740A-LON-SVR4-Disk2.vhd 20740A-LON-SVR5.vhd 20740A-LON-SVR5-Disk1.vhd 20740A-LON-SVR5-Disk2.vhd




20740A-LON-SVR6.vhd


20740A-NANO-SVR1.vhd

D:\Program Files\Microsoft Learning\20740\Drives \20740A-NANO-SVR1\Virtual Hard Disks

20740A-LON-NVHOST2.vhd

D:\Program Files\Microsoft Learning\20740\Drives \20740A-LON-NVHOST2\Virtual Hard Disks

WinServer2016_TP5.ISO


LiteTouchPE_x64.ISO



11

3. Create virtual switches This section creates the virtual switches for this learning product. 1. Browse to D:\Program Files\Microsoft Learning\20740\Drives\ . 2. Right-click CreateVirtualSwitches.ps1, and then click Run with PowerShell. Press Y, and then press Enter if prompted. 3. Press Enter to close the PowerShell window. 4. Start Hyper-V Manager, and then click Virtual Switch Manager. 5. In the Virtual Switches area of the Virtual Switch Manager dialog box, verify the following virtual switches, and then click Cancel: •

Name: Private Network

•

Name: Cluster Network

•

Name: iSCSI Storage Network

4. Create a setup share In this task, you will share virtual machine files for copying to student computers. 1. Share the C:\Program Files\Microsoft Learning\Base folder using a share name of Base_Drives. 2. Share the D:\Program Files\Microsoft Learning\20740\Drives folder using a share name of 20740A_Drives.

Note: For information about how to set up a share in Windows Server 2012, see the topic “Share a Resource” in Windows Help and Support.

5. Copy the virtual machine files to the student computer Note: You must perform the file copy prior to importing the virtual machines. Once you import the virtual machines, you will not be able to import them again. 1. From the student computer, copy all of the files from the Base_Drives share on the instructor computer to C:\Program Files\Microsoft Learning\Base. 2. Copy all of the files from the 20740A_Drives share on the instructor computer to D:\Program Files\Microsoft Learning\20740\Drives.

12


Note: Ensure that all files are successfully copied: D:\Program Files\Microsoft Learning\20740 and all included folders and files C:\Program Files\Microsoft Learning\Base 3. Ensure that you have copied the files using a permission-retaining software such as RoboCopy or XCopy. 4. Verify that all permissions have been retained by looking at the directories above and ensuring that they are not set to Read-Only. 5. Add the virtual machines to the Hyper-V management console. For detailed instructions see Instructor Computer Setup in this document.

6. Run the VM-Pre-Import script In this task, you will run the VM-Pre-Import-20740A.ps1 file. This script will create links to the base and mid-tier images in the import folder which are necessary for importing each virtual machine. 1. Browse to D:\Program Files\Microsoft Learning\20740\Drives\ . 2. Right-click VM-Pre-Import-20740A.ps1, and then click Run with PowerShell. Press Y, and then press Enter if prompted. 3. At the On which disk drive are the base images extracted prompt, type the appropriate drive letter to which the base images are extracted, and then press Enter. 4. At the On which disk drive are the course images extracted prompt, type the appropriate drive letter to which the course images are extracted, and then press Enter. 5. Press Enter to close the PowerShell window.

7. Import the virtual machines on the instructor computer 1. Browse to D:\Program Files\Microsoft Learning\20740\Drives\ . 2. Right-click D:\Program Files\Microsoft Learning\20740\Drives \20740A_ImportVirtualMachines.ps1, and then click Run with PowerShell. Press Y, and then press Enter if prompted. 3. At the On which disk drive are the course virtual machines extracted prompt, type the appropriate drive letter to which the course images are extracted, and then press Enter.


13

8. Configure the virtual machines on the instructor computer 1. Open Hyper-V Manager, right-click 20740A-LON-DC1, and then click Start. 2. Right-click 20740A-LON-DC1 , and then click Connect. Verify that the computer starts. 3. Sign in as Adatum\Administrator using a password of Pa$$w0rd. Verify that the sign in is successful. 4. For Windows Server 2016: Open an administrative command prompt, type slmgr –rearm, press Enter, and then restart the computer. 5. After the computer restarts, sign in as Adatum\Administrator using a password of Pa$$w0rd. 6. For Windows 10: Information about activation and steps about how to obtain product keys for activation can be found on the Born To Learn website at: http://go.microsoft.com/fwlink/?LinkId=270851, and in Appendix B. 7. Only for 20740A-LON-CL1: i. From the Start screen, type cmd. ii. Right-click Command Prompt, and then click Run as administrator. iii. At the command prompt, type the following commands in order. This will rearm Office 2016: CD \ CD C:\Program Files\Microsoft Office\Office16 cscript ospp.vbs /rearm

8. Shut down the virtual machine. 9. Repeat steps 1-8 for the following virtual machines: •

20740A-LON-CL1

•

20740A-LON-SVR1

•

20740A-LON-SVR2

•

20740A-LON-SVR3

•

20740A-LON-SVR4

10. Browse to D:\Program Files\Microsoft Learning\20740\Drives. 11. Right-click TakeVMSnapshot.ps1, and then click Run with PowerShell. 12. Press Y, and then press Enter if prompted. 13. At the What do you want to call the Snapshot prompt, type StartingImage, and then press Enter.

14


9. Configure the host computer to boot to the 20740A-LON-HOST1.vhd 1. From the Host computer, open Server Manager. Click Tools, and then click Computer Management. 2. Expand Storage, click and then right-click Disk Management, and then click Attach VHD. 3. In the Attach Virtual Hard Disk dialog box, click Browse. 4. Browse to C:\Program Files\Microsoft Learning\Base , click 20740A-LON-HOST1.vhd. Click Open, and then click OK . Note the drive letter that is associated with the 126.51 GB partition. 5. On the Start screen, type cmd, right-click Command Prompt, and then click Run as administrator. If required, click Yes. 6. At the command prompt, type bcdboot :\windows, and then press Enter. Note that is the drive letter that was associated with the 126.51 GB partition. 7. At the command prompt, type bcdedit /set {default} Description 20740ALON-HOST1 , and then press Enter. 8. In Computer Management, right-click the attached VHD, and then click Detach VHD. Click OK . 9. Restart the host computer. The computer will restart, and by default, will boot into the 20740A-LON-HOST1 computer.

Note: These steps configure the server to boot to the 20740A-LON-HOST1 computer as the default. After finishing the course, if you need to boot to the original host operating system, open a command prompt, type bcdedit and verify the identifier number for the vhd to remove. Then in the command prompt, type bcdedit /delete {id_number}, and then press Enter. When you restart the computer, it will boot to the original operating system. 10. After the server restarts, sign in as Adatum\Administrator using the password Pa$$w0rd. At the Network page, click Yes if prompted.


Note: In some cases, the computer may display a blue screen with a stop error when you restart the computer. If this happens, restart the computer, and then complete the following troubleshooting steps: 1. Boot into the Host installation, and then verify that you have at least 100 GB of free space on the C: drive. 2. Reboot the computer, access the computer BIOS, and then check the Controller Mode. If the Controller Mode is set to AHCI, change it to another option (IDE or compatibility mode). If Controller Mode is set to RAID, move to the next step. 3. Your disk controller may require a custom driver in order for the operating system in the VHD to access the hard drives. To install the custom driver, boot into the Host installation, and then complete the following: a. Download the hardware-specific storage driver from hardware manufacturer’s website. Save the drivers to C:\Drivers folder. b. Reattach the 20740A-LON-HOST1.vhd file as described in steps 1-4. c. Open a command prompt, type the following command, and then press Enter:

DISM /Image:E:\ /Add-Driver /Driver:C:\Drivers /recurse d. Restart the computer. 11. Open an administrative command prompt, and type slmgr –rearm, press Enter, and then restart the computer. After the computer restarts, sign in as Adatum\Administrator using the password Pa$$w0rd. 12. Right-click the Start menu and then click Device Manager. Verify that all drivers have installed correctly. If drivers are missing, consult your hardware manufacturer for the driver packages and install updated drivers as needed. 13. On the LON-HOST1 , open System Properties, and then open Startup and Recovery. Configure the default operating system to be Windows Server 2012. 14. Restart LON-HOST1 and then boot into the default Windows operating system.

10. Install the PowerPoint slides •

Install the PowerPoint slides for the learning product by extracting the files included in 20740A-ENU-PowerPoint.exe.

15

16


Student Computer Checklist 

1. Install the Hyper-V Server role



2. Install the base image and virtual machine files

Student Computer Setup Use the instructions in the following section to set up the classroom manually. Before starting the student computer installation, you must install a supported operating system on the computer. You can review the supported systems list at http://www.microsoft.com/hyper-v.

Caution: These instructions assume network connectivity between the instructor computer and the student computers. If you do not have connectivity, Microsoft Learning recommends copying the activated virtual machines to the student computers by means of a manually created DVD or USB drive.

1. Install the Hyper-V Server role Note: If Hyper-V is installed already, you can skip this procedure. For detailed instructions, see Instructor Computer Setup in this document.

2. Install the base image and virtual machine files Note: Ensure that all extracted courseware virtual machine files were copied successfully from the Instructor computer during the Instructor Computer setup process. C: \Program Files\Microsoft Learning\20740 and all included folders and files D: \Program Files\Microsoft Learning\Base 1. Verify that all permissions have been retained by looking at the directories above and ensuring they are not set to Read Only. 2. Run the scripts. For detailed instructions, see the Instructor Computer setup instructions in this document. 3. Add the virtual machines to the Hyper-V management console. For detailed instructions, see Instructor Computer Setup in this document.


17

Appendix A: Keyboard Layout The virtual machines were developed using the English (United States) layout shown below.

If your physical keyboard does not match the above layout, you might need to refer to the above layout for the character positions used to sign in. For future sign-in’s and usage throughout the labs, you might want to install your keyboard layout in the virtual machine.

18


Appendix B: Activating the Windows 10 Virtual Machine Obtaining product keys for activation To receive product keys that you will use to activate the Windows 10 virtual machines accompanying this course, follow the guidelines described at: http://go.microsoft.com/fwlink/?LinkId=270851

Activating a Windows 10 virtual machine You must first ensure that the Microsoft Forefront Threat Management Gateway (TMG) virtual machine and any domain controller (if required for the course) have been started, and that the TMG virtual machine has Internet connectivity. Then, perform the following steps to activate the Windows 10 virtual machine: 1. On the Windows start page, type cmd. 2. Right-click Command Prompt, and then click Run as Administrator. 3. If prompted, click Yes in the User Account Control dialog box. 4. At the command prompt, type slmgr /ipk < product key >, and then press Enter. 5. Click OK in the dialog box. 6. At the command prompt, type slmgr /ato, and then press Enter.

Note: In order for you to activate the virtual machine successfully, the virtual machine must have Internet connectivity. 7. In the dialog box, click OK .

NOTE: The Windows 10 client virtual machines will need Internet access to allow activation. This is provided through the MSL-TMG1 virtual machine. The virtual machine and associated Setup guide is available from the MCT Download Center. High-level details are included below.


19

To configure the MSL-TMG1 virtual machine 1. Set up the MSL-TMG1 virtual machine. You can download the MSL-TMG1 virtual machine and its related Setup guide from the MCT Download Center in the Base Virtual Hard Disks – Mid-Tiers (ENGLISH) folder. The TMG virtual machine requires Base11A-WS08R2SP1.VHD, which also is available on the MCT Download Center in the Base Virtual Hard Disks (ENGLISH) folder. 2. Configure the MSL-TMG1 virtual machine to use dynamic memory. a. In the Hyper-V management console, access the MSL-TMG1 virtual machine settings. b. Click Memory, click Enable Dynamic Memory, and then set Startup RAM to 1024 MB and Maximum RAM to 4096 MB. 3. Perform the following additional configuration changes on MSL-TMG1: a. Change the IP addresses as follows: virtual machine to 172.16.0.1, subnet mask: 255.255.0.0, and DNS: 172.16.0.10. b. Open Forefront TMG Management. c. Click Networking, click the Networks tab, click Internal, and then click Edit Selected Network . d. In the Internal Properties dialog box, click the Addresses tab, and then click the Add Adapter button. e. Select Private, and then click OK . f.

Click OK again, and then click the Apply button.

g. Click Apply one more time, and then click OK . h. Click the Web Access Policy node, and enable the Allow Web access for All Users access rule.

20740A_setupguide.pdf

Recommend Documents