OPERATION AND MAINTENANCE MANUAL (REVAMPING OF GAS TURBINE MS 5002D)
Volume I Parts List; Drawings & Documents of the Job; Instrumentation PLEASE CORRECT PLANT LOCATION AND PLANT NAME
NUOVO PIGNONE JOB N.P. SERIAL NUMBERS CUSTOMER PLANT LOCATION PLANT OR UNIT
: 284.4523-24 : G06047-48 : TIPIEL X ECOPETROL : XXXXXXXXXX COLUMBIA COLOMBIA : CUPIAGA GAS PLANT
MODIFICATION OF
:
MANUFACTURER
:
GAS TURBINE MS 5002D (N.P. JOB: 160.5634-35)
GE Oil & Gas Nuovo Pignone
Via F. Matteucci, 2 50127 Florence - Italy Telephone (055) 423211 Telefax (055) 4232800
SEE COMMENTS INSIDE
07-10-E MOD. INPR/SVIL/ P.F. 12/00
284.4523-24
P. 1-1
g GE Oil & Gas
Nuovo Pignone
Volume I
VOLUME INDEX
This volume is subdivided into Sections as follows:
- REVAMPING (GENERAL)
Section 1
- MS 5002D GAS TURBINE SAFETY INSTRUCTIONS
Section 2
- PARTS LIST
Section 3
- INSTRUMENTATION PUBLICATIONS
Section 4
- REFERENCE DRAWING & DOCUMENTS OF THE JOB
Section 5
X
MEQ-00-001 NA A5016 1241-MEQ00001-NA-A5016-00016
07-10-E MOD. INPR/SVIL/ P.F. 12/00
O. GÓMEZ
284.4523-24
1-FEB-2011
P. 1-1
g GE Oil & Gas
Nuovo Pignone Volume I
Section 1
PLEASE CORRECT COUNTRY NAME
REVAMPING (GENERAL)
The documentation included in this manual refers to revamping for the Gas Turbines installed in your plant of CUPIAGA –XXXXXXXXX COLUMBIA. COLOMBIA In our case is revamped to MS 5002D Gas Turbine. The revamping supply proper of a N.P. Job 284.4523-24 consists essentially of: • modification to: - Speed Ratio & Gas Control Valve; - Fuel Nozzle Single Gas; - Fuel Gas Piping Modification.
07-10-E MOD. INPR/SVIL/ P.F. 12/00
284.4523-24
P. 1-1
g GE Oil & Gas
Nuovo Pignone Volume I
Section 2
SAFETY INSTRUCTIONS Contents - GAS TURBINE SAFETY INSTRUCTIONS
07-10-E MOD. INPR/SVIL/ P.F. 12/00
SOM 6607109/4
284.4523-24
P. 1-1
g GE Oil & Gas
Nuovo Pignone Volume I
Section 3
N.P. Job: 284.4523-24
PARTS LIST INDEX
NAME
PARTS LIST N°
DRAWING N°
FUEL NOZZLE SINGLE GAS
SMO 9730304
SOM 63051
FUEL NOZZLE
SMO 0410746
SMO 0410746
FUEL GAS PIPING MODIFICATION
SMO 9876237
SMO 9876237
Regarding nozzle, during document revision, GE issue the doc. SOM6622957 which was already revised and approved as final. Please check if mentioned two documents above are necessary or only SOM6622957 To include also the doc. - SMO9876238/1: Major piping layouts and dwgs model MS5002D (SX)
07-10-E MOD. INPR/SVIL/ P.F. 12/00
284.4523-24
P. 1-1
g Nuovo Pignone
TITOLO - TITLE - TITRE - TITLE
LISTA PARTI - PARTS LIST - LISTE DES PIECES - STUECKLISTE
INSTRUMENTATION PUBLICATIONS SUB-SECT. 1 SPEED RATIO & GAS CONTROL VALVE NP CODE
RVO 307911010 (ITM 42011.01)
INSTRUMENT
VALVE
ITEM
DESCRIPTION
SPEED RATIO & GAS CONTROL VALVE (NUOVO PIGNONE BARI)
NP TAG
PUBLICATION
GE STD GEK 103818
In document GE STD, you have included the drawing SMO9625202 in rev. 3. During document revision phase GE oil & Gas sent drawing SMO9625202 in rev. 4, this doc. was revised and approved by TIPIEL as final. In order to maintain traceability, please correct doc. GE STD by replacing SMO9625202 in rev. 3 by doc. SMO9625202 in rev. 4.
07-10-E MOD. INPR/SVIL/ P.F. 12/00
284.4523-24
P. 1-1
g GE Oil & Gas
Nuovo Pignone Volume I
Section 5
N.P. Job: 284.4523-24 REFERENCE DRAWING & DOCUMENTS OF THE JOB INDEX POS.
NAME
DRAWING N°
1
UTILITY CONSUMPTION LIST
SOM 6626715
2
G.T. PERFORMANCE CURVES
SOM 5464053
3
FUEL BURNER DWG.
SOM 6622957
4
ENGINE DATA SHEET FOR TDCSS
SOM 6626538
5
FUEL SYSTEM DATA SHEET
SOM 6704354
Furthermore, the following docs. which were sent by GE Oil & Gas during engineering revision, and which TIPIEL commented and approved, are not included here. Please include: - SOM5462155 /3: Cross sectional and assembly dwgs (with part list) Flexible hose (Models MS5002C/MS5002D) - SMO9876238/1: Major piping layouts and dwgs model MS5002D (SX) - SOM33365: TURBINE CONTROL SPECIFICATION MS5002D - ITN 54750: Recommendations for storage prior and after erection - SOX0051038 /4: FIELD MODIFICATION INSTRUCTION (FMI) MS5002D - Procedure for test-run (spanish and english) whcih has still not been sent. - Two Years spare parts list It is understood that this is the IOM, and therefore some of the documents listed will not be included in this Manual, but in the VDB. Considering that GE Oil & Gas has still not sent the VDB table of content, comments has been done here.
