@ Perkins
®
Technical Data 1104C-44TA
1100 Series
92,2 kW @ 1000 - 2200 rev/min
IOPU Basic technical data
Centre of gravity
Number of cylinders. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .4 Cylinder arrangement .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .In-line Cycle ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..4 stroke Induction system.. ... ... ... ...turbocharged, air to air charge cooled Compression ratio ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...18·3 : 1 Bore . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 105 mm (4.13 in) Stroke .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 127 mm (5 in) Cubic capacity . ... ... ... ... ... ... ... ... ... ... ... ... ... 4.4 litres (269 cu.in) Direction of rotation.. ... ... ... ... .Anti-clockwise viewed on flywheel Firing order .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .1, 3, 4, 2 Estimated total weight (dry) . ... ... ... ... ... ... ... ... .500 kg (1100 lb) Estimated total weight (wet). ... ... ... ... ... ... ... ... .520 kg (1144 lb)
-forward from rear of block ... ... ... ... ... ... ... ... ... ... ... . 310,0 mm -above block centre line ... ... ... ... ... ... ... ... ... ... ... ... ... . 124,4 mm -offset to RHS ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 21,6 mm
Performance Note: All Note: All data based on operation to ISO/TR143396, ISO3046/1 standard reference conditions Cyclic irregularity -at 100% continuous power power .. ... ... ... ... ... ... ... ... ... ... ... 0,00625
Test conditions -air temperature ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 25 °C (68 °F) -barometric pressure. ... ... ... ... ... ... ... ... ... ... 100 kPa (14.5 psi) -relative humidity ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 30%
Overall dimensions -height.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 996 mm (39.2 in) -length.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 1259 mm (49.6 in) -width .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 721 mm (28.4 in)
Moments of inertia (kgm²) -engine Includes fan pulleys, fan & flywheel: ... ... ... ... ... ... ... TBA -with pusher fan ... ... ... ... ... ... ... ... ... ... ... ... 1,54 kg ² (36.5 lbft² lbft ²) -with puller fan . ... ... ... ... ... ... ... ... ... ... ... . 1,56 kgm ² (37.0 lbft² lbft ²) -flywheel .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1,13 kgm ² (31.1 lbft² lbft ²)
Sound level average sound pressure level for bare engine (without inlet and exhaust) at meter .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... T.B.A. All ratings certified to within . ... ... ... ... ... ... ... ... ... ... ... ... +/- 5% If the engine is to operate i n ambient conditions other than those of the test conditions, suitable adjustments must be made for these changes. For full details, contact Perkins Technical Service Department.
General installation Designation
Type of operation and application
Units
Engine speed rev/min Gross engine power Brake mean effective pressure
1000
1200
1400
1600
1800
2000
2200
kW (bhp)
42,7 (57.2)
58,8 (78.8)
73,3 (98.3)
83,3 (111.7)
88,4 (118.5)
94,0 (126.0)
97,0 (130.0)
kPa (lbf/in²)
1165 (168.9)
1336 (193.8)
1428 (207.0)
1420 (205.9)
1339 (194.2)
1279 (1 (186.0)
1199 (174.0)
Mean Piston speed
m/s (ft/s)
4,23 (13.89)
5,08 (16.67)
5,93 (19.45)
6,77 (22.22)
7,62 (25.00)
8,47 (27.78)
9,31 (30.56)
IOPU net engine power
kW (bhp)
40,6 (54.4)
56,0 (75.1)
69,6 (93.3)
79,1 (106.0)
84,9 (114.0)
90,2 (121.0)
92,2 (123.6)
l/min (UK gal/min)
-
-
132,0 (29.0)
151,0 (37.7)
170,0 (37.4)
190,0 (41.9)
210,0 (46.2)
Engine coolant flow 35kPa restriction Combustion air flow
m³/min (ft³/min)
2,9 (102)
-
5,1 (180)
-
6,8 (240)
-
7,9 (279)
Exhaust gas flow (max)
m³/min (ft³/min)
7,8 (275.0)
-
13,1 (463.0)
-
16,4 (579.0)
-
18,5 (653.0)
Exhaust gas temperature (max)
°C (°F)
520 (968)
-
510 (950)
-
500 (932)
-
510 (950)
Cooling fan air flow (Pusher)
m³/min (ft³/min)
-
-
121 (4278)
141 (4978)
160 (5667)
-
199 (7045)
Cooling fan air flow (Puller)
m³/min (ft³/min)
-
-
124 (4370)
152 (5372)
172 (6065)
-
211 (7452)
KW
114,0
149,6
186,0
213,0
229,0
247,0
258,0
Btu/min
6489
8515
10587
12124
13034
14059
14685
KW
42,7
58,8
73,3
83,3
88,4
94,0
97,0
Btu/min
2430
3347
4172
4714
5032
5350
5521
KW
28,5
34,8
41,5
46,0
48,3
52,0
53,5
Btu/min
1622
1981
2362
2618
2749
2960
3045
KW
30,9
42,9
55,7
67,0
69,7
79,2
86,5
Btu/min
1759
2442
3170
3814
3967
4508
4924
KW
9,3
8,4
7,4
7,2
7,1
7,4
8,0
Btu/min
529
478
421
410
404
421
455
KW
2,2
4,7
8,2
9,5
12,4
12,8
13,4
Btu/min
125
268
467
541
706
729
763
Energy in fuel (Fuel heat of combustion) Gross heat to power
Energy to coolant and lubricating oil
Energy to exhaust
Heat to radiation
Heat to change cooler
Caution:
The airflows shown in this table will provide acceptable cooling for an open power unit operating in ambient temperatures of up to 53 °C (46 °C if a canopy fitted). If the power unit is to be enclosed totally, a cooling test should be done to check that the engine cooling is acceptable. If there is insufficient cooling, c ontact Perkins Technical Service Department.
1104C-44TA - IOPU, Left side view
1104C-44TA - IOPU, Front view
1104C-44TA - IOPU, Right side view
1104C-44TA - IOPU, Rear view
1104C-44TA - IOPU, Plan view
This page has been left intentionally blank
1100 Series
1104C-44TA
Cooling system Radiator -face area... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..0,25 m² (2.69 ft) -rows and materials ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 38 Aluminium -gills/inch and material ... ... ... ... ... ... ... ... 9.4 Aluminium fins per inch -width of matrix... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 439 mm (17.3 in) -height of matrix . ... ... ... ... ... ... ... ... ... ... ... ... ... ... 570 mm (22.4 in) -pressure cap setting . ... ... ... ... ... ... ... ... ... ... ... .. 100 kPa (14.5 psi) Fan -diameter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 508 mm (20 in) -drive ratio.. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 1:1 -number of blades.. ... ... ... ... ... ... ... ... ... ... ... ... .Pusher 7, Puller 10 -material. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... composite -type... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ..Pusher or Puller Coolant
50% ethylene glycol with a corrosion inhibitor (BS 658 :1992 or MOD AL39) and 50% clean fresh water. Total system capacity -with radiator .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12,6 l (22.2 pt) -without radiator. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 7.0 l (12.3 pt) Maximum top tank temperature. ... ... ... ... ... ... ... ... .. 110 °C (230 °F) Thermostat operation range... ... ... ... ... ... ... 82 - 93 °C (180 - 199 °F)
Recommended coolant:
Electrical System -type... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . Negative ground -alternator... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 12V/24V options -starter motor . ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 12V/24V options Cold start recommendations Minimum cranking speed ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 80 rpm
Starter specification Starter Motor type
12 volt, 3.0 kW
Minimum starting temperature
Minimum battery type for SAE lubricating oil viscosity
°C
°F
15W
-5
23
1XB
-15
5
1XB
-20
-4
-25
-13
10W
5W
0W
1XB
92,2 kW @ 1000 - 2200 rev/min Fuel lift pump -flow/hour. ... ... ... ... ... ... ... ... ... ... ... ... 120 - 150 l/h (211 - 264 pt/m) -pressure.. ... ... ... ... ... ... ... ... ... ... ... ... ... 30 - 75 kPa (4.4 - 10.9 psi) Maximum suction head ... ... ... ... ... ... ... ... ... ... ... ... .. 17 kPa (1,7 m) Maximum pressure head . ... ... ... ... ... ... ... ... ... ... ... ... 3 kPa (0,3 m) Governor type ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Mechanical Fuel Specification
USA Fed off Highway EPA 2D 89.330-96
Density (kg/l @ 15 °C)
0.835/0.855
Viscosity (mm²/s @ 40 °C)
2.0/4.5
Sulpher Content
0.2% Max.
Cetane Number
45 min.
Fuel consumption - litres/hour (UK gallons/hour) Fuel consumption given 100% power rating at specified speed Speed
1000
1200
1400
1600
1800
2000
2200
Consumption
11.8/ 2.44
14.84/ 3.26
18.25/ 4.02
21.13/ 4.65
23.84/ 5.24
25.64/ 5.64
26.69/ 5.87
Induction system Maximum permissible air intake restriction at engine -clean filter ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 5,0 kPa -dirty filter. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 8,0 kPa -air filter type ... ... ... ... ... ... ... ... ... ... 2 stage cyclonic/paper element
Lubrication system Lubricating oil capacity: -Total system ... ... .. 7,4 l (13.0 pt) Balanced 7,9 l (13.9 pt) Unbalanced -Minimum ... ... ... ... ..4,1 l (7.2 pt) Balanced 5,6 l (9.9 pt) Unbalanced Maximum engine operating angles.. ... 25° Balanced, 24° Unbalanced Lubricating oil pressure -relief valve opens ... ... ... ... ... ... ... ... ... ... 415 - 470 kPa (60 - 68 psi) -at maximum no-load speed ... ... ... ... ... ... 276 - 414 kPa (40 - 60 psi) Normal oil temperature ... ... ... ... ... ... ... ... ... ... ... ... 110 °C (230 °F) Max continuous oil temperature... ... ... ... ... ... ... ... ... 125 °C (257 °F) Oil consumption at full load as a % of fuel consumption ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 0.15% Recommended SAE viscosity A Single of multi grade lubricating oil which conforms to API CD/SE or CCMC D4 must be used, see illustration below:
1XB
Battery type
0W
Commercial ref number
Perkins code
643
Battery Minimum Performance
BS 3911
SAE J537
A
440
660
647
B
510
770
069
D
340
540
655
E
570
810
Maximum back pressure for total system .. ... ... ... ... .. 15 kPa (2.2 psi) Inside diameter of outlet flange.. ... ... ... ... ... ... ... ... ... 64 mm (2.5 in)
Fuel system Type of injection. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. Direct Fuel injection pump ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .Rotary Fuel atomiser. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... Multi-hole Nozzle opening pressure ... ... ... ... ... ... ... ... ... ... 29,0 MPa (2176 psi)
Perkins Engines Company Limited Peterborough PE1 5NA United Kingdom Telephone +44 (0) 1733 583000 Fax +44 (0) 1733 582240 www.perkins.com All information in the document is substantially correct at the time of printing but may be subsequently altered by the company.
10W30 15W40 20W50 20 30 40 -30 -22
Exhaust system
@ Perkins ®
5W20
Distributed by
-20 -4
-10 14
0 32
10 50
20 68
30 86
40 104
50oC 122o F
Ambient temperarture W1355
Mountings Type. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... 4 point rubber mounting Maximum bending moment at rear face of block ... ... ... ... ... ... ... ... ... ... ... ... ... 791 Nm (583 lbf ft)
. d e t i m i L y n a p m o C s e n i g n E s n i k r e P ©
. N E E R G : l a i t n e d i f n o C s n i k r e P . 2 e u s s I , E 2 0 5 1 D P T . o N n o i t a c i l b u P
